Year 2022
-
Stadter - Dough rising basket Rectangle
Stadter - Dough rising basket Rectangle In dough rising baskets, also called bannetons or fermentation baskets, the dough has time to ferment and lift while keeping its form, which gives perfect baking results. Our dough rising baskets are made from natural materials and can thus vary in form and size. Clean with a dry brush after use, do not clean with water. With recipe and instruction Material rattan Size ca. 38,5 x 13,5 cm / H 6,5 cm capacity 1750 g8013R -
Städter - Venetian mask cutters - Carnival
Städter - Venetian mask cutters - Carnival New cutters dedicated to the carnival. Venetian mask in 3d. Stainless steel material. Measurements: 10,5x4cm. Do you want to surprise your kids or your friends with the shortbread for carnival? Use this beautiful cutter and fun to decorate with stencils and colored markers or pearlescent powder or colored sugar.8406C -
Stadter - Cookie Cutter Puff Pastry – 2 pieces
Stadter - Cookie Cutter Puff Pastry – 2 pieces
With these cutters you can easily and accurately cut out puff pastry for small baked goods. Put a dab of filling in the middle, fold the wings of the pastry over the filling, brush with a little egg and put in the oven. Enjoy baking and decorating! This cookie cutter is made of high quality plastic. We advise to wash up the cutter with running, warm water straight after use. In folding box for hanging up.
Material ABS plastic
Size 8,4 x 8,4 x 2,2 cm
Color red
Surface glossy .
550025 -
Stadter - 10-piece set - World Monuments for biscuits
Stadter - 10-piece set - World Monuments for biscuits
These biscuit cutters were made with loving attention to detail.
In addition to the fine and precise shapes, they also feature an engraving on the inside of the biscuit cutter.
This makes the biscuits look more three-dimensional and beautiful even without decorations.
You can also use the moulding lines on the biscuits as decoration lines.
These biscuit cutters are also very well suited for handicrafts and for cutting modelling clays (e.g. sugar paste, wax, modelling material, clay, ceramics, etc.) .
The biscuit cutters are spot-welded.
You can recognise the stainless steel by the shiny, polished surface.
This biscuit cutter can be used not only for cutting dough, but also in the decorative and creative DIY and hobby sector for modelling clay and salt dough or for working with felt and making candles and soaps.
THE GRAND MONUMENTS AROUN THE WORD SET INCLUDES 10 COOKIE CUTTERS:
1.BIG BEN ( Great Britain)
2. STATUE OF LIBERTY ( USA)
3. EIFFEL TOWER ( France)
4. KINDERDIJK WINDMILL( Netherlands)
5. TOWER OF PISA ( ITALY)
6. PARTHENON ( Greece)
7. TAJ MAHAL ( India)
8. PYRAMIDS OF GIZA ( Egypt)
9. THE GREAT WALL ( China)
10. SYDNEY OPERA HAUSE ( Australia).
W1002 -
Stadter - Christmas Tree Cutter
Stadter - Christmas tree dough cutter.
The mold is in the shape of a Christmas tree with star and circle hollows and is made of stainless steel, dishwasher safe and food grade.
All shapes are spot-welded. They can be used for cutting dough, but also in DIY and hobby work, for shaping dough, salt dough or felt work for pouring soap or candles.
Dimensions: 8 x 7.5 x 2.5 cm
054264 -
Stadter - Adapter for sac a poche nozzles - pastry - 224056
With the help of the Stadter adapter, you can change the tips, even with a full icing bag, and continue decorating with a different tip.
Insert the inside of the adapter into the icing bag.
Position the tip on the inner part and secure it with the screw cap.
Position the tip securely.
Now you can fill the bag for decoration.
The adapters are made of food-safe plastic
We recommend washing them with hot running water immediately after use.
224056 -
Stadter - Ice crystal mold
Stadter - Ice Crystal Mold
With this ice crystal cutter from Städter, ice crystal is decorated in a flash! Here you not only cut out the outline of the pattern, but also small patterns inside the cutter. This creates an especially beautiful effect.
- With crystal cutouts
- 8 cm in diameter
- Also for modeling salt dough, salt dough or felt work
175204 -
TB Outdoor - C.A.C. GIGN knife - Limited Edition - French Army - 11060099 - tactical multipurpose knife
THE CAC® GIGN - Limited Edition 250 ex.
The Intervention Groupe de la Gendarmerie Nationale (GIGN) is an elite unit of the French National Gendarmerie specializing in counter-terrorism actions, in the freeing of hostages and in special operations.
LE CAC® officially chosen by the French Army
This knife is a true concentrate of all the advanced technologies that one would expect from an operational knife. The blade is in Nitrox®, with a PA6 handle
The version of the C.A.C currently supplied to the army, with the official logo on the blade and coyote handle is not available for sale to the civilian.
The CAC ® is the third knife produced by Tarrerias - Bonjean designed for the French army. Its uncompromising design, lightness and strength make the CAC® an exceptional knife. Much more technical and ambitious than its predecessors, the CAC® is TB's response to the request expressed by the French army, namely to design a sturdy and ambidextrous knife with one-handed opening and closing. To create this exceptional knife, Tarrerias - Bonjean collaborated with Philippe Perotti, a former member of the French special forces and author of dozens of books on shooting. Its proven track record in hand-to-hand combat has maximized the efficiency of knife use to make the CAC® the ideal companion for French troops in all operational theaters. The locking mechanism of the CAC® is extremely robust and guarantees perfect locking of the blade in the open position.
TB has also integrated the safe blade locking mechanism by moving the axis on the CAC®. This mechanism is extremely robust and guarantees perfect locking of the blade in the open position.
The CAC® was officially selected in 2017 by the French army, compared to the competitors' offer, for its performance and value for money. Its distribution in the various corps began at the beginning of 2018 and will largely equip our French at least until 2022.
Perfectly resistant to corrosion, the blade is made of Nitrox®. The CAC® also has a glass breaker, a belt cutter and a reversible belt clip.
The handle is composed of two polymer plates loaded with glass fibers. These plates are screwed to the mechanism by means of stainless steel screws, one of which cleverly houses a strap cutter blade. This interchangeable, curved blade is designed to cut through straps, ropes and seat belts for easy extraction in the event of an accident.
Intended use: collection
Blade: stainless steel Nitrox® 58/59 hrc
Handle: in PA6 FV
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 238mm.
Weight: 195g.
Sheath: -
Notes: Philippe Perotti design11060099 -
TB Outdoor - C.A.C. knife Desert - French Army - 11060105 - tactical multipurpose knife
LE CAC® officially chosen by the French Army
This knife is a true concentrate of all the advanced technologies that one would expect from an operational knife. The blade is in Nitrox®, with a PA6 handle
The version of the C.A.C currently supplied to the army, with the official logo on the blade and coyote handle is not available for sale to the civilian.
The CAC ® is the third knife produced by Tarrerias - Bonjean designed for the French army. Its uncompromising design, lightness and strength make the CAC® an exceptional knife. Much more technical and ambitious than its predecessors, the CAC® is TB's response to the request expressed by the French army, namely to design a sturdy and ambidextrous knife with one-handed opening and closing. To create this exceptional knife, Tarrerias - Bonjean collaborated with Philippe Perotti, a former member of the French special forces and author of dozens of books on shooting. Its proven track record in hand-to-hand combat has maximized the efficiency of knife use to make the CAC® the ideal companion for French troops in all operational theaters. The locking mechanism of the CAC® is extremely robust and guarantees perfect locking of the blade in the open position.
TB has also integrated the safe blade locking mechanism by moving the axis on the CAC®. This mechanism is extremely robust and guarantees perfect locking of the blade in the open position.
The CAC® was officially selected in 2017 by the French army, compared to the competitors' offer, for its performance and value for money. Its distribution in the various corps began at the beginning of 2018 and will largely equip our French at least until 2022.
Perfectly resistant to corrosion, the blade is made of Nitrox®. The CAC® also has a glass breaker, a belt cutter and a reversible belt clip.
The handle is composed of two polymer plates loaded with glass fibers. These plates are screwed to the mechanism by means of stainless steel screws, one of which cleverly houses a strap cutter blade. This interchangeable, curved blade is designed to cut through straps, ropes and seat belts for easy extraction in the event of an accident.
Intended use: collection
Blade: stainless steel Nitrox® 58/59 hrc
Handle: in PA6 FV
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 238mm.
Weight: 195g.
Sheath: -
Notes: Philippe Perotti design11060105