military and tactical knives

Exclusive limited edition series in collaboration with INSTRUCTOR ZERO (Team Zero International Training Security Company), renowned firearms training specialist, risk analyst and strategic consultant working worldwide for both military and law enforcement specialized units and government agencies.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from private collection, previously purchased.
* Condition: New, never used
* Commercially available: Discontinued, limited run of only 33 numbered pieces
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Testudo MIL-C-13924
Handle: Anticorodal
Blade Length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 23mm. (15mm without clip)
Weight: 139g.
Closure: Liner Lock with additional safety catch
Clip: Stainless Steel
Packaging: watertight plastic box with Extrema Ratio and Team Zero logos, Warranty Certificate, Velcro Patch, Limited edition made in only 33 pieces

In everyday life or outside of it, the Magnum Field Flipper is an EDC knife for all occasions.

The pocket knife stands out above all by its tactically unobtrusive appearance. The black-coated 440A stainless steel blade and military green Micarta handle are attractive features. The blade opens smoothly with a ball-bearing flipper system or with a thumb pin on either side and closes reliably with a linerlock. Supplied with a lanyard hole and tip-up clip.

Type of manufacture: industrial

Blade: 440A 56HRC stainless steel
Blade finish: Teflon coated
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.8mm.
Total length: 183mm.
Weight: 108g.
Closure: liner lock
Clip: removable, stainless steel
Sheath: -
Notes: -

The Swoopy makes a splash! Knife designer and U.S. Marine Corps expert Michael Burch, from the U.S. state of Idaho, performs like no other on the EDC stage with this new Boker Plus. Fine materials, elegant features, and high-quality workmanship mean the Swoopy has plenty of groupies.

The Modified-Wharncliffe Nitro-V ball-bearing blade with stonewash finish opens smoothly through the thumb hole; the sturdy stainless steel frame lock and non-slip catches ensure safe work even in tough conditions. Vertical grooves in the sand-brown G10 handle's front cheekpiece ensure a firm grip and stylishly reflect the knife maker's tactical experience. The tip-up clip and lanyard hole make the knife pocket-sized and easy to carry.

Intended Use: EDC / Sporting

Production type: Industrial
Country of manufacture: China
Blade: Nitro-V stainless steel
Blade finish: stonewash
Handle: G10 and stonewash stainless steel
Blade length: 79mm.
Blade thickness: 3.1mm.
Total length: 180mm.
Weight: 93g.
Clip: removable, stainless steel
Packaging: cardboard box with Boker Plus logos and cordura pouch with zipper
Notes: design by Michael Burch

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially Available Available.
* Sharpening: Factory.
* Marks on blade: A couple of light marks on burnishing.
* Marks on handle: Slight signs of wear on hardware and clip.
* Box: Present, but not in perfect condition
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory


Intended Use: Tactical/Sporting

Production Type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924
Handle: Anticorodal (aluminum)
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 15mm.
Weight: 139g.
Closure: Liner Lock, with additional safety catch
Clip: stainless steel removable and reversible
Packaging: cardboard box with Extrema Ratio logos

Intended use: Tactical / EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Full tang in AUS-8 57/59HRC stainless steel
Blade finish: Powder coated
Handle: Zytel
Blade length: 80mm.
Blade thickness: 3.7mm.
Total length: 197mm.
Weight: 117g. (172g. with sheath)
Sheath: ABS with clip
Notes: -

Intended use: Tactical / sport

Type of production: Industrial
Production Lama USA with assisted opening
Blade: steel 154CM 58 / 61HRC
Blade treatment: -
Handle: Black Valox polymer
Blade length: 73mm.
Blade thickness: 2.5 mm.
Closed Length: 101mm.
Overall length: 175mm.
Thick when closed: -
Balancing: -
Weight: 96g.
Closing: AXIS Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with Benchmade logos
Notes: design by Osborne

This one is for the fans! For years Benchmade has received countless requests to make a "Super Freek" mini, and it has listened to you loud and clear. The Mini Freek 565BK-02 takes everything you love about its full-size counterpart and reduces it to a more pocketable form, including the black CPM-M4 blade and instantly recognizable tricolor G10 handle. With unmistakable style and uncompromising strength, this Mini Freek is truly super.

Intended use: sporty

Type of production: industrial
Country of manufacture: USA
Blade: CPM-M4 62/64HRC stainless steel
Blade treatment: Cerakote
Handle: G10 with anodized aluminum spacers
Blade length: 76.2mm.
Blade thickness: 2.6mm.
Length closed: 102mm.
Total length: 179mm.
Weight: 82g.
Closure: AxisLock
Clip: Stainless steel, removable and reversible
Packaging: cardboard box with Benchmade logos
Notes: -

As one of the four blacksmiths, the dwarf Dvalin created the Brisingamen necklace for the Germanic goddess of love, Freya. In Norse mythology, this special jewel is attributed with magic, love, but also pain and suffering. Freya's tears in the sky always promised rich fruits on the earth.

However, it was the wrath of the father of the gods, Odin, that often drove the goddess of love to unleash wars in the world of men. Dirk Hofmeister of Midgards Messer was inspired by the art of Nordic forging and created the folding blade version of the beloved Little Dvalin.

The powerful Dvalin Folder Tanto impresses with its compact dimensions and features a Tanto blade in D2 steel with ball bearings, finished with a rough stonewash appearance and equipped with a deep engraving on both sides to open the folding knife using the recess as a nail lever.

The engraving on the top of the blade offers a secure grip for the thumb during complex cutting operations. Despite the wrath of the gods, the well-formed and partly grooved G10 handle always fits firmly in the hand. On the back of the handle is the stainless steel Frame Lock that securely locks the blade.

With a commercial 3D printer, it is possible to print alternative handles in various shapes, colors, and materials. The Tip-Up (r) clip matches the handle's texture, while the lanyard hole increases ease of use. It comes with a high-quality nylon case for storage.

Intended use: Utility

Type of production: Industrial
Country of production: China
Blade: in D2 steel
Blade finish: stonewash
Handle: G10
Blade length: 71mm.
Blade thickness: 5.1mm.
Total length: 167mm.
Weight: 157g.
Clip: in steel
Packaging: cardboard box with Boker Plus logos
Notes: -

As one of the four smiths, the dwarf Dvalin crafted the Brisingamen necklace for the Germanic goddess of love, Freya. In Norse mythology, this special jewel was attributed with magic, love, but also pain and suffering. Freya's tears in the sky always promised rich fruits on earth.

However, it was the wrath of the father of the gods, Odin, that often drove the goddess of love to instigate wars in the world of men. Dirk Hofmeister from Midgards Messer was inspired by the art of Nordic forging and created the folding blade version of the beloved Little Dvalin.

The powerful Dvalin Folder Tanto stands out for its compact size and features a Tanto blade in D2 steel with ball bearings, finished with a rough stonewash appearance and equipped with a deep groove on both sides for opening the folding knife using the recess as a nail lever.

The groove on the top of the blade provides a secure support for the thumb during complex cutting operations. Despite the wrath of the gods, the well-formed and partially grooved G10 handle always fits firmly in the hand. On the back of the handle is the stainless steel Frame Lock that securely locks the blade.

With a commercial 3D printer, it is possible to print alternative handles in a variety of shapes, colors, and materials. The Tip-Up (r) clip mirrors the texture of the handle, while the hole for the lanyard enhances ease of use. It comes with a high-quality nylon case for storage.

Intended use: Utility
Production type: Industrial
Country of production: China
Blade: full tang in D2 steel
Blade finish: stonewash
Handle: G10
Blade length: 71mm.
Blade thickness: 5.1mm.
Total length: 167mm.
Weight: 157g.
Clip: in steel
Packaging: cardboard box with Boker Plus logos
Notes: -

The Spartan-Ronin Shōtō is a folding karambit knife with a liner lock. This blade is the result of a collaborative effort between Spartan Blades and TU Lam of Ronin Tactics, our former Special Forces colleague and dear friend.

Having worked throughout Asia and in Indonesia, both Tu Lam and Spartan hold a great respect for the Karambit style. This blade was designed to be incorporated into various martial arts systems.

It features a blade made of CTS-XHP, "Emerson Wave" function for easy opening, and a reversible pocket clip for left-hand carry; the black and red G10 grips ensure a secure grip. Please check this link to Ronin Tactics HERE.

All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or “OIBBS”. Our sintered bronze bearings are oil-impregnated, thereby reducing friction on the blade, offering you a tight but smooth blade opening.

Intended use: Collection / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in stainless steel CTS-XHP
Blade treatment: Satin Black Ti/Nitride Finish
Handle: G10
Blade length: 75mm.
Blade thickness: 3.2mm.
Closed length: 135mm
Total length: 200mm.
Weight: 179g.
Lock: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.

Type of production: Industrial
Country of production: USA
Blade: in CPM-S90V steel 59/61HRC
Blade finish: Satin
Handle: Carbon Fiber
Blade length: 74mm.
Blade thickness: 2.7mm.
Closed length: 97.5mm.
Total length: 172mm.
Thickness when closed: 10mm.
Weight: 54g.
Lock: AXIS Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Design by Warren Osborne

Intended Use: Tactical / Military 

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Black Idroglider
Handle: G10
Blade length: 78mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 97g.
Sheath: kydex, with double Ulti-Clip attachment system
Packaging: cardboard box with Fox logos
Notes: Design by Doug Marcaida

Ferrum T is a folding knife with a clear tactical connotation equipped with a spear point blade with lightening slot. It has a slim and compact shape, the two anodized anticorodal aluminum grips make up a light, slender and at the same time very resistant handle. It can be housed in a breast pocket, in small flashlight holsters or inside a single loop of the M.O.L.L.E. system.

Equipped with a flipper assisted opening system, the blade rotates on ball bearings which allow a smooth and uncertain movement of the blade. This mechanism allows the user to open the blade quickly and easily, even with just one hand. The locking system adopted is the well-tested liner lock. The reversible clip is positioned on the back.

Ferrum T is available in 2 versions: the first, FERRUM T Black Warfare, equipped with a black handle and Geotech Camo blade, the innovative and original Extrema Ratio camouflage pattern, created by laser engraving. The second, FERRUM T TACTICAL MUD, with anodized handle in the new gray-green color and blade with MIL-C-13924 bluing.

The reversible clip is positioned on the back.

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade Finish: Black
Handle: Rough Anticorodal
Blade length: 73mm.
Blade thickness: 3mm.
Closed length: 90mm.
Total length: 184mm.
Weight: 86g.
Closure: Liner Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Ferrum T is a folding knife with a clear tactical connotation equipped with a spear point blade with lightening slot. It has a slim and compact shape, the two anodized anticorodal aluminum grips make up a light, slender and at the same time very resistant handle. It can be housed in a breast pocket, in small flashlight holsters or inside a single loop of the M.O.L.L.E. system.

Equipped with a flipper assisted opening system, the blade rotates on ball bearings which allow a smooth and uncertain movement of the blade. This mechanism allows the user to open the blade quickly and easily, even with just one hand. The locking system adopted is the well-tested liner lock. The reversible clip is positioned on the back.

Ferrum T is available in 2 versions: the first, FERRUM T Black Warfare, equipped with a black handle and Geotech Camo blade, the innovative and original Extrema Ratio camouflage pattern, created by laser engraving. The second, FERRUM T TACTICAL MUD, with anodized handle in the new gray-green color and blade with MIL-C-13924 bluing.

The reversible clip is positioned on the back.

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade Finish: Black
Handle: Rough Anticorodal
Blade length: 73mm.
Blade thickness: 3mm.
Closed length: 90mm.
Total length: 184mm.
Weight: 86g.
Closure: Liner Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Ferrum E is a simple, essential and functional EDC (Every Day Carry) folding knife. Equipped with a drop blade, it has a slim and compact shape, the two anodised anticorodal aluminium sheaths make up a light, slender and at the same time very durable handle. It can be housed in a breast pocket, in small torch holsters or inside a single M.O.L.E. loop.

Equipped with a flipper-assisted opening system, the blade rotates on ball bearings that allow for smooth and uncertainty-free blade movement. This mechanism allows the operator to open the blade quickly and easily, even with one hand. The locking system adopted is the tried and tested liner lock.

The reversible clip is positioned at the rear.

Intended use: Tactical / EDC

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade finish: Satin
Handle: Rough Anticorodal
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 186mm.
Weight: 87g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Ferrum E is a simple, essential and functional EDC (Every Day Carry) folding knife. Equipped with a drop blade, it has a slim and compact shape, the two anodised anticorodal aluminium sheaths make up a light, slender and at the same time very durable handle. It can be housed in a breast pocket, in small torch holsters or inside a single M.O.L.E. loop.

Equipped with a flipper-assisted opening system, the blade rotates on ball bearings that allow for smooth and uncertainty-free blade movement. This mechanism allows the operator to open the blade quickly and easily, even with one hand. The locking system adopted is the tried and tested liner lock.

The reversible clip is positioned at the rear.

Intended use: Tactical / EDC

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade finish: Satin
Handle: Rough Anticorodal
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 186mm.
Weight: 87g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Intended Use: Tactical / EDC

Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924
Handle: Rough Anticorodal
Blade Length: 70mm.
Blade thickness: 3mm.
Length closed: 99mm.
Total length: 168mm.
Weight: 85g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Intended Use: Sporting / Light Utility

Production type: Industrial
Country of Production: China
Blade: full tang, D2 steel
Blade finish: TPFE
Handle: Micarta and Copper
Blade length: 76mm.
Blade thickness: 3.7mm.
Total length: 155mm.
Weight: 103g.
Sheath: kydex, with Tek-Lok type multi-position attachment
Packaging: cardboard box with Boker Plus logos
Notes: Design by Jesper Voxnaes

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight: a few small scratches and abrasions on corners and clip; small oxidation marks on hardware
* Box: Present and original (full set).
* Scabbard: -
* Manuals, Certificates and Warranties: Present (full set)
* Checked and Certified by our in-house laboratory



Tactical knife/EDC produced in the late 1990s and designed by martial arts expert James Keating,

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.

Intended Use: Tactical/Collection
Production Type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM 
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 75mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 13mm
Weight: 90g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Master of Defense logos

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Stainless steel and G10
Blade length: 74mm.
Blade thickness: 3.1mm.
Length closed: 109mm.
Total length: 183mm.
Thickness when closed: 13mm.
Weight: 119g.
Opening: rapid Carson Flipper system
Washers: with KVT ball bearings
Closure: FrameLock
Clip: deep pocket, stainless steel, removable
Packaging: cardboard box with Kershaw logos
Notes: Opening via Carson-flipper system on KVT ball bearings

Intended Use: Tactical / Military 

Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 190mm.
Weight: 120g.
Locking system: Liner Lock, with additional safety.
Clip: removable and reversible, painted stainless steel
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)

Intended Use: Tactical / Military 

Type of production: Industrial
Country of Production: Italy
Blade: full tang in stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 180mm.
Weight: 120g.
Sheath: kydex, with Tek-Lok-like attachment 
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)

Intended Use: Tactical / Military 

Production type: Industrial
Country of Production: Italy
Blade: full tang in stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 180mm.
Weight: 130g.
Sheath: kydex, with Tek-Lok-like attachment 
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended Use: Sporting / Tactical

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S45VN
Blade Treatment: Stonewashed
Handle: G-10
Blade Length: 75mm.
Blade thickness: 3.7mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 96g.
Closure: Compression Lock
Clip: Stainless steel
Package: cardboard box with Spyderco logos
Notes: new 2021 version with CPM-S45VN steel and Stonewashed finish

Intended Use: Outdoor / Light Utility

Production type: Industrial
Country of Production: China
Blade: D2 steel ful tang
Blade finish: Stonewashed
Handle: Micarta with copper rivets
Blade length: 70mm.
Blade thickness: 2.9mm.
Total length: 155mm.
Weight: 85g.
Sheath: leather
Packaging: cardboard box with Boker Plus logos
Notes: Design by Jesper Voxnaes.

Intended use: tactical

Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier

Production: Taiwan

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

KA-BAR

Intended Use: Sporty/EDC

Production Type: Industrial
Country of Production: USA
Blade: Steel CPM-S30V 58/60HRC
Blade Finish: Satin finish
Handle: Aluminum 6061-T6 with green anodization and purple anodized spacers
Blade Length: 74mm.
Blade thickness: 2.7mm.
Length closed: 97.5mm.
Total length: 172mm.
Thickness when closed: 10mm.
Weight: 57g.
Closure: AXIS Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Design by Warren Osborne

Intended use: Sports / Tactical / EDC

Type of production: Industrial
Country of production: USA
Blade: CPM-S30V 58 / 60HRC steel
Blade finish: Black Cerakote
Handle: black and blue G10 with anodized aluminum spacers
Blade length: 74mm.
Blade thickness: 2.7mm.
Closed Length: 97.5mm.
Total length: 172mm.
Thick when closed: 10mm.
Weight: 62g.
Closure: AXIS Lock
Clip: Removable and reversible, in stainless steel with PVD treatment
Packaging: Cardboard box with Benchmade logos
Notes: Design by Warren Osborne

Intended use: sports / collection

Type of production: Industrial
Country of production: USA
Blade: CPM-S90V stainless steel (59-61 HRC)
Blade treatment: satin
Handle: Carbon Fiber
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 179mm.
Weight: 78g.
Closing: Axis
Clip: Stainless steel
Packaging: Cardboard box with Benchmade logos
Note: -

The Extrema Ratio Frame Rock is a new knife, based on the Ti-Rock project, a successful frame-lock knife made by Extrema Ratio in 2016 exclusively for Coltelleria Collini.

The Extreme Ratio Frame Rock is characterized by the titanium handle that offers great resistance while being very light. The integrity of the frame-lock locking system is guaranteed against wear by an easily replaceable hardened steel insert.

Unlike its drop-point predecessor, the Rock frame has a spearpoint blade 75 mm long, 6.0 mm thick, equipped with fuller for further lightening. The blade is made of Bohler N690 steel, heat treated to a hardness of 58 HRC. The same is available in black finish with DLC or satin finish.

To make the opening even more fluid and free of uncertainties, the blade rotates on ball bearings. This mechanism allows the user to adjust the force necessary to release the blade from the closed position.

The shape of the reversible clip allows a hidden port in the pocket, making the knife not visible from the outside. The large, solid handle and the well-proportioned blade allow this knife to tackle demanding tasks. Frame Rock weighs less than 200g, making it somewhat light for such a sturdy knife. It is supplied inside an ABS box.

Intended use: collection / CQD

Type of production: industrial
Blade: in N690Co stainless steel
Blade treatment: Black DLC
Country of production: Italy
Handle: in Titanium, machined from solid, with integral Frame Lock closure system with removable hinged and safe made of stainless steel
Blade length: 75mm.
Blade thickness: 6.3mm.
Total length: 181mm.
Weight: 193g.
Clip: stainless steel, reversible, deep pocket type and with tip up port
Notes: Conical Skull Crasher inserted in the shank
Box: in ABS with Extrema Ratio logos

The Extrema Ratio Frame Rock is a new knife, based on the Ti-Rock project, a successful frame-lock knife made by Extrema Ratio in 2016 exclusively for Coltelleria Collini.

The Extreme Ratio Frame Rock is characterized by the titanium handle that offers great resistance while being very light. The integrity of the frame-lock locking system is guaranteed against wear by an easily replaceable hardened steel insert.

Unlike its drop-point predecessor, the Rock frame has a spearpoint blade 75 mm long, 6.0 mm thick, equipped with fuller for further lightening. The blade is made of Bohler N690 steel, heat treated to a hardness of 58 HRC. The same is available in black finish with DLC or satin finish.

To make the opening even more fluid and free of uncertainties, the blade rotates on ball bearings. This mechanism allows the user to adjust the force necessary to release the blade from the closed position.

The shape of the reversible clip allows a hidden port in the pocket, making the knife not visible from the outside. The large, solid handle and the well-proportioned blade allow this knife to tackle demanding tasks. Frame Rock weighs less than 200g, making it somewhat light for such a sturdy knife. It is supplied inside an ABS box.

Intended use: collection / CQD

Type of production: industrial,
Blade: in N690Co stainless steel
Blade treatment: Satin finish
Country of production: Italy
Handle: in Titanium, machined from solid, with integral Frame Lock closure system with removable hinged and safe made of stainless steel
Blade length: 75mm.
Blade thickness: 6.3mm.
Total length: 181mm.
Weight: 193g.
Clip: stainless steel, reversible, deep pocket type and with tip up port
Notes: Conical Skull Crasher inserted in the shank
Box: in ABS with Extrema Ratio logos

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Lama treatment: Ceracote
Handle: FRN
Blade length: 75mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 188mm.
Thick when closed: 18mm
Weight: 135g.
Closure: Liner Lock
Clip: steel
Sheath: -
Packaging: cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Lama treatment: Ceracote
Handle: FRN
Blade length: 75mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 188mm.
Thick when closed: 18mm
Weight: 135g.
Closure: Liner Lock
Clip: steel
Sheath: -
Packaging: cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Desert Warfare
Handle: Anticorodal
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 99mm.
Total length: 168mm.
Thick when closed: 11mm.
Weight: 85g.
Opening: Ambidextrous opening pin on the blade
Washers: Teflon
Closure: Liner Lock
Clip: stainless steel, deep pocket type, removable and reversible
Sheath: -
Packaging: cardboard box with Extrema Ratio logos
Note: -

Intended use: tactical / military

Type of production: Industrial
Country of production: Maniago - Italy
Blade: Full Tang in stainless steel N690Co
Blade treatment: Stonewashed
Handle: G10
Blade Length: 70mm.
Blade thickness: 3mm.
Total length: 190mm.
Balancing: Rearranged
Weight: 80g.
Sheath: Kydex, neck or belt, with Tek-Lok multiposition attachment
Packing: Cardboard box with Maserin logos
Notes: designed by Russ Kommer

Intended use: tactical / military

Type of production: Industrial
Country of production: Maniago - Italy
Blade: Full Tang in stainless steel N690Co
Blade treatment: Teflonatura
Handle: G10
Blade Length: 70mm.
Blade thickness: 3mm.
Total length: 190mm.
Balancing: Rearranged
Weight: 80g.
Sheath: Kydex, neck or belt, with Tek-Lok multiposition attachment
Packing: Cardboard box with Maserin logos
Notes: designed by Russ Kommer

Intended use: Tactical

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Blackwashed
Handle: G10
Blade Length: 76mm.
Blade thickness: 3mm.
Closed length: -
Overall length: 187mm.
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMD

Intended use: Sports / Tactical

Type of production: Industrial
Production Country: Italy
Blade: stainless steel Elmax 59 / 61HRC
Blade treatment: PVD
Handle: Carbon fiber with titanium spacer
Blade length: 75mm.
Blade thickness: 3.5mm.
Closed Length: 103m.
Overall length: 178mm.
Thick when closed: -
Weight: 95g.
Lock: Liner Lock
Clip: Titanium
Sheath: -
Packaging: Cardboard box with logos Fox Knives
Notes: Design by Jesper Voxnaes

Intended use: tactical / backup

Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel N680 57 / 59HRC
Blade treatment: Teflon
Handle: Gryvory
Blade length: 73mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 143mm.
Weight: 67g.
Closed: -
Sheath: ABS, with metal clip
Packaging: cardboard box with Benchmade logos
Notes: -

Folding knife with rescue karambit connotation, adopted by the special units of the Police of the Principality of Monaco U.S.I.V.P. The knife gets its name from a development and consulting department of the special intervention forces Monegasque.

Intended use: Tactical / Rescue

Type of production: Industrial
Production Country: Italy
Blade: Stainless steel 58HRC N690Co
Blade treatment: Stone Washed
Handle: Anticorodal
Blade length: 73.5mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 196mm.
Thick when closed: -
Weight: 166g.
Lock: Liner Lock with safety catch further
Clip: Stainless Steel
Packaging: black cardboard with Extrema Ratio logos
Notes: Size emergency belts and skull crasher

Folding knife with rescue karambit connotation, adopted by the special units of the Police of the Principality of Monaco U.S.I.V.P. The knife gets its name from a development and consulting department of the special intervention forces Monegasque.

Intended use: Tactical / Rescue

Type of production: Industrial
Production Country: Italy
Blade: Stainless steel 58HRC N690Co
Blade treatment: Testudo MIL-C-13924
Handle: Anticorodal
Blade length: 73.5mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 196mm.
Thick when closed: -
Weight: 166g.
Lock: Liner Lock with safety catch further
Clip: Stainless Steel
Packaging: black cardboard with Extrema Ratio logos
Notes: Size emergency belts and skull crasher

Intended use: Tactical

Type of production: Industrial
Production Country: Italy
Blade: Stainless steel 58HRC N690Co
Blade treatment: Testudo MIL-C-13924
Handle: Anticorodal
Blade length: 68mm.
Blade thickness: 4mm.
Closed Length: 110mm.
Overall length: 181mm.
Thick when closed: 23mm. (15mm without clips)
Weight: 139g.
Lock: Liner Lock with safety catch further
Clip: Stainless Steel
Packaging: black cardboard with Extrema Ratio logos

The Resolza is the typical Sardinian folding knife, called improperly "Pattada" from the name of the village in the province of Sassari which is the production center. Extrema Ratio wanted to pay homage to the most famous knife of the Italian tradition by blending its original shape and traditional, with the techniques and the most advanced materials.

Intended use: Sports

Type of production: Industrial
Blade: N690Co 58HRC stainless steel
Production Country: Italy
Handle: Anticorodal
Blade length: 79mm.
Blade Thickness: 3mm.
closed length: -mm.
Overall length: 173mm.
Weight: 36g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

Intended use: Tactical / EDC

Type of production: Industrial
Blade: 8Cr14MoV stainless steel
Blade treatment: Teflon
Production Country: China
Handle: G10
Blade length: 82mm.
Blade thickness: 3mm.
Closed Length: 90mm.
Overall length: 188mm.
Weight: 114g.
Closing: Framelock
Clip: removable and reversible, stainless steel
Notes: Design by Ernie Emerson

Intended use: Sport / Tactical / EDC

Type of production: industry
Blade: stainless steel 8Cr13MoV
Treatment Blade: Stonewashed
Production Lama: China
Handle: Stainless steel stonewashed and G10
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 165mm.
Balancing: -
Weight: 105g.
Closure: Frame Lock
Clip removable and multi, Teflon-coated stainless steel
Sheath: -
Notes: Design by Rick Hinderer

Destinazione d'uso: Rescue / Neck Knife

Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: in acciaio inox N690Co
Finitura Lama: lucidata
Manicatura: G-10
Lunghezza lama: 70mm.
Spessore lama: 3.5mm.
Lunghezza totale: 145mm.
Peso: 70g.
Fodero: ABS, da collo
Confezione: Scatola di cartone con loghi Fox
Note: Design by Alfredo Doricchi

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Lama production: Italy
Handle: Anticorodal
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 99mm.
Total length: 168mm.
Balancing: -
Weight: 85g.
Closure: Liner Lock
Clip: reversible and removable in stainless steel
Sheath: -
Note:

Intended use: Tactical

Type of production: Industrial
Blade production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Testudo
Manicure: Anticorodal
Blade Length: 70mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 174mm.
Closure thickness: 23mm. (15mm without clips)
Balance: -
Weight: 138g.
Closure: Liner Lock
Clip: Stainless Steel
Sheath: -
Packing: black carton box with Extrema Ratio logos
Notes: -

Knife Withdrawn from Private Collection
Type: Previously Purchased
Condition: Excellent
Available in the market: No
Sharpening: Original
Marks on the blade: No
Marks on the handle: No
Packaging: Yes
Sheath: In Kydex
Manuals, Certificates, and Warranties: Yes
Checked and Certified by our internal laboratory
Intended Use: Tactical/CQC

Type of Production: Industrial
Blade Production: Italy
Blade: Full tang in N690Co steel 58/60HRC
Blade Treatment: Teflon Coating
Handle: G-10
Blade Length: 75mm.
Blade Thickness: 4mm.
Closed Length: -
Total Length: 195mm.
Thickness when closed: -
Balance: Backward, at 3cm.
Weight: 170g.
Lock: -
Clip: on the sheath
Sheath: in Kydex
Packaging: Gray cardboard box with Fox logos
Notes: -