military and tactical knives
-
Benchmade - Skirmish 630 Titanium - NOS FULL SET from a PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition.
* Commercially available: Discontinued since 2014
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present, with a few small signs of time.
* Sheath: Microfiber bag with Benchmade logos.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Sporting / Collection
Production Type: Industrial
Country of Production: USA
Blade: made of CPM-S30V steel at 58-60HRC
Blade finish: satin-finished
Handle: anodized titanium
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 245mm.
Handle thickness: 12.5mm.
Weight: 189.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) conditionBM-630-CP -
Spyderco - Para 3 - CPM-S45VN and G10 Digital Camo - C223GPCMO - knife
Intended Use: Sporting / Tactical
Production Type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S45VN
Blade Treatment: Stonewashed
Handle: G-10
Blade Length: 75mm.
Blade thickness: 3.7mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 96g.
Closure: Compression Lock
Clip: Stainless steel
Package: cardboard box with Spyderco logos
Notes: new 2021 version with CPM-S45VN steel and Stonewashed finishC223GPCMO-S45 -
Benchmade - Adamas by Shane Sibert - Flat Earth Cruwear - 275FE-2 - knife
Intended Use: Utility / Hiking / Tactical
Production Type: Industrial
Country of Production: USA
Blade: Tool steel CPM-CRUWEAR 63/65HRC
Blade Treatment: Tungsten Flat Earth
Handle: G10 with PVD stainless steel folders
Blade length: 97mm.
Blade thickness: 3.6mm.
Length closed: 132mm.
Total length: 227mm.
Handle thickness: 16mm.
Weight: 182g.
Closure: AxisLock
Clip: Deep Pocket, removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos, microfiber pouch with Benchmade logos
Notes: High carbon steel blade, not stainless; wash and dry carefully after use and grease in case of storageBM-275FE-2 -
Benchmade - Mini Adamas by Shane Sibert - Flat Earth Cruwear - 273FE-2 - knife
Intended Use: Utility / Hiking / Tactical
Production Type: Industrial
Country of Production: USA
Blade: Tool steel CPM-CRUWEAR 63/65HRC
Blade Treatment: Tungsten Flat Earth
Handle: G10 with PVD stainless steel folders
Blade length: 82.6mm.
Blade thickness: 3.6mm.
Length closed: 111mm.
Total length: 193mm.
Handle thickness: 16mm.
Weight: 130g.
Closure: AxisLock
Clip: Deep Pocket, removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos, microfiber pouch with Benchmade logos
Notes: High carbon steel blade, not stainless; wash and dry carefully after use and grease in case of storageBM-273FE-2 -
Fox - Monkey Thumper by Black Rock Knives - Micarta - FX-633MOD - knife
Intended Use: Tactical / CQC
Production type: Industrial
Country of Production: Italy
Blade: Full tang, stainless steel Niolox at 59/61HRC
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Total lenght: 215mm.
Weight: 165g.
Sheath: ABS, with removable loops for horizontal carrying.
Package: Cardboard box with Fox logos
Notes: Design by Black Rock Knives - Possibility of icepick grip using the karambit ring on the tang.FX-633MOD -
Tops - SXB Skullcrushers Xtreme Blade - TPSXB10 - knife
Intended use: Tactical / Survival / Heavy Utility
Type of production: semi-industrial
Blade: full tang, 1095 58HRC carbon steel
Blade finish: Black Traction Coating
Handle: Micarta
Blade length: 260mm.
Blade thickness: 6mm.
Total length: 425mm.
Balancing: advanced
Weight: 735g.
Sheath: Nylon
Notes: Design By Xtreme Survivalist & Adventurer EJ SnyderTPSXB10 -
Benchmade - Turret - DLC serrated - OD G10 - 980SBK - knife
Intended use: tactical / sports
Type of production: Industrial
Country of production: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: Black DLC
Handle: G10 with aluminum spacers
Blade length: 94mm.
Blade thickness: 3.1mm.
Length closed: 124mm.
Total length: 218mm.
Weight: 165g.
Closure: Axis
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Benchmade logos
Note: -BM-980SBK -
Benchmade - Bugout Axis - Grey Coated - 535GRY-1 - knife
Use: Sportsman / EDC
Type of production: Industrial
Country of Origin: USA
Blade: CPM-S30V 58 / 60HRC
Blade: Treatment: Grey Coated
Handle: Grivory
Blade Length: 82mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 189mm.
Closure thickness: 10.5mm
Balance: -
Weight: 52g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packing: cardboard box with Benchmade logos
Notes: -BM-535GRY-1 -
Viper - David Evoluzione by T. Rumici - Green Micarta - VT4002ECG - knife
Use: Light Utility
Type of production: Industrial
Production Country: Italy
Blade: Carbon steel D2 59 / 60HRC
Blade Treatment: Blackwash
Handle: Canvas Micarta
Blade length: 105mm.
Blade thickness: 5.8mm.
Overall length: 227mm.
Balancing: backward 2cm
Weight: 260g.
Sheath: Nylon, compatible M.O.L.L.E. by Vega
Packaging: cardboard box with Viper and logos Tecnocut
Notes: Design by Tommaso RumiciVT4002ECG -
Fox - Trakker - Extreme Tactical Kukri - Bronze Coating - FX-9CM05BT - knife
Intended use: Utility
Type of production: Industrial
Production Country: Italy
Blade: Stainless steel N690Co 58 / 60HRC
Blade treatment: HNCF
Handle: Forprene
Blade length: 240mm.
Blade thickness: 6mm.
Overall length: 370mm.
Balancing: Advanced, to 5cm from the guard branch
Weight: 440g.
Sheath: Nylon, with M.O.L.L.E. attacks
Packaging: cardboard box with Fox logosFX-9CM05BT -
Fabrizio "Silvester" Silvestrelli - Custom CSFK - CPM-S30V - handmade knife
Knife handmade, designed and produced in only 10 copies (5 CPM-S30V steel sandblasted and 5 in RWL-34 steel coated TIN) from the known knifemaker Fabrizio "Silvester" Silvestrelli in collaboration with Collini Cutlery.
Further the CSFK feature is the ability to change at will the manicatura the same between the grips included in the package: Micarta Loveless, G10 or Black Paracord Camouflage. The knife can also be deprived of the grips to be used as a spearhead or to minimize the footprint thickness.
Intended use: tactical / collection
Type of production: made entirely by hand, limited and numbered
Production Country: Italy
Blade: full tang CPM-S30V Stainless Steel 60 / 61HRC
Surface treatment: glass micropallinatura
Handle: Micarta Loveless / G10 / Paracord
Blade length: 135mm.
Blade Thickness: 5.5mm.
Overall length: 250mm.
Weight: 225g.
Sheath: Cordura, made in the USA, made by Blackhawk
Notes: knife made by the cutler Fabrizio "Silvester" Silvestrelli in only 5 specimens - certificate of guarantee and authenticity - key to remove the grips9006 -
Gerber - LMF II Infantry Verde - 1626 - Cuchillo
Gerber - LMF II Infantry Verde - 1626 - Cuchillo
Después de dos años de colaboración con el instructor militar experto Frank Heyl el Gerber se complace en llevar al mercado lo que definen como el más resistente de los cuchillos militares / de supervivencia como nunca cuchillo costruiti.Il es , de hecho, diseñado no sólo para ser extremadamente ágil y cambios rápidos en agarre , pero también lo suficientemente resistente como para perforar el fuselaje de un avión, pero también simplemente ser utilizados como un martillo , frangivetri o cuchillo de lanzamiento .
Uso previsto : Military
Tipo de producción : industrial
Hoja: Acero inoxidable 12C27
Tratamiento de la hoja: TiNi - nitruro de titanio
Producción Lama EE.UU.
Material del mango : fibra de vidrio antideslizante y nylon
Longitud de la hoja : 125mm .
Espesor de la hoja : 4 mm .
Longitud cerrado : -
Longitud total: 275mm .
Balance: hacia atrás 3cm .
Peso: 330 g .
Cierre: -
Clip -
Funda: Nylon y resistente al fuego polímeros desliz , múltiples ataques SPRINGS sistema , ultra -delgado para limitar las dimensiones generales , integrado afilador
Notas : Skullcrasher / Martillo en acero inoxidable y los orificios para la correa de muñeca o para ser utilizado con un poste para crear una lanza .5738G -
Wander Tactical - Mountain Lion - Stone Edge D2 & Loveless Micarta - custom knife
Intended Use: Excursionism / Heavy Duty
Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC
Blade Finish: Stone Edge
Handle: Micarta Loveless
Blade Length: 140mm.
Blade thickness: 6.3mm.
Total length: 255mm.
Balance: advanced
Weight: 425g.
Sheath: made of Kydex, thermoformed, with MOLLE compatible belt loop
Packaging: Made in Italy thermoplastic case with airtight closure and impact resistant
Notes: Each knife is unique and handcrafted in every partWT-MLK-SELM -
Ontario Knife Company - RAT 3 Skinner Micarta - 8661 - knife
Intended use: tactical/sporting
Type of production: Industrial
Country of manufacture: USA
Blade: Fulltang, 1095 black textured powder coated steel
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3.5mm.
Total length: 197mm.
Balance: advanced
Weight: 200g.
Sheath: leather, for vertical carrying on belt
Packaging: cardboard box with Ontatio Knife Company logos.ON8661 -
Wander Tactical - Uro Saw Marble knife - Green Micarta - craft knife
Intended use: Utility / Collection
Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: Marble
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balancing: advanced
Weight: 450g.
Sheath: in thermoformed kydex, with double belt loop, M.O.L.L.E. compatible
Packaging: without packaging, accompanied by certificate of authenticity, version with hallmark with WT and DP marks
Notes: Each knife is unique and made entirely by handWT-URS-MGM -
Tops - Anaconda Hunters Point knife - AN9-HP - 1095 - knife
Intended use: tactical / collection
Type of production: semi industrial
Blade: full tang in 1095 carbon steel
Production Lama: USA
Handle: Micarta
Blade length: 240mm.
Blade thickness: 6mm.
Closed Length: -
Total length: 375mm.
Balance: advanced - 2.5cm. from the guard branch
Weight: 630g.
Closure: -
Clip: -
Sheath: Cordura
Packaging: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticityTOP-AN9-HP -
Tops - Mini Tom Brown Tracker knife # 4 - Camo 1095 - TBT-040-CAMO - knife
Intended use: Collection / Survival
Type of production: semi industrial
Production Lama: USA
Blade: 1095 58HRC carbon steel
Blade treatment: BTC - Camo Traction Coating
Handle: micarta with red spacers
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length: -
Total length: 168mm.
Thick when closed: -
Balancing: on the guard branch
Weight: 92g.
Closure: -
Clip: -
Sheath: in kydex, tactical with multi-position clip
Packaging: -
Notes: Design by Tom Brown, extra small version of the knife used in the film The Hunted with Benicio Del Toro, each piece is numbered and accompanied by a certificate of guarantee and authenticity.TBT-040-CAMO -
Tops - Skullcrushers Xtreme Blade knife SXB Camo - TPSXB10C - knife
Intended Use: Tactical/Military/Survival
Type of production: semi industrial
Blade: full tang in carbon steel 1095 58HRC
Blade finishing: Camouflage
Handle: Micarta
Blade length: 260mm.
Blade thickness: 6mm.
Total length: 425mm.
Balance: Advanced
Weight: 735g.
Sheath: Nylon
Notes: Design By Xtreme Survivalist & Adventurer EJ Snyder.TPSXB10C -
Spyderco - Para 3 - G10 Digital Camo - C223GPCMO - PRIVATE COLLECTION - knife
Knife collected from private collection - Absolutely like new, old production CPM-S30V steel - Never used - Original sharpening - Original box, slightly marked, with certificates - Knife checked and certified by our internal laboratory
Intended Use: Sporting / TacticalProduction type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade Treatment: Stonewashed
Handle: G-10
Blade Length: 75mm.
Blade thickness: 3.7mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 96g.
Closure: Compression Lock
Clip: Stainless steel
Package: cardboard box with Spyderco logos
Notes: like new knife, taken from a private collectionC223GPCMO-CP -
Wander Tactical - Hurricane Folder Gen.IV - DLC Green Micarta - folding knife
Intended use: Heavy Duty / Hiking / Tactical / Collection
Production type: industrial
Country of production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Black DLC
Handle: Titanium folders with micarta grip
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 120mm.
Total lenght: 210mm.
Thickness when closed: 13,6mm.
Weight: 164g.
Closure: Rockers Arm 8.11 with additional screw safety pin, removable
Clip: Titanium, removable and reversible
Package: Plastic box with Wander Tactical logos, warranty certificate, safety pin
Notes: 4th generation, production 2021WT-H4-PGM -
Wander Tactical - Uro Saw - Raw and Green Micarta - handmade knife
Intended Use: Utility / Collection
Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balance: Advanced
Weight: 450g.
Sheath: thermoformed kydex, with double belt loop, M.O.L.L.E. compatible.
Package: unpacked, accompanied by certificate of authenticity
Notes: Each knife is unique and made entirely by handWT-UR-S-RGM -
Wander Tactical - Smilodon - Marble and Green Micarta - handmade knife
Production type: Heavy duty hiking / Collection
Production type: Handmade
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Marble
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 360mm.
Balance: set back from the guard branch
Weight: 644g.
Scabbard: Kydex, thermoformed
Packaging: unpacked, accompanied by certificate of authenticity
Notes: Each knife is unique and made entirely by handWT-SM-MBGM -
Spyderco - Military - Natural G-10 & CPM-M4 Black DLC - Exclusive Edition - C36GM4BK - Knife
Intended Use: Collection / Tactical
Production Type: Industrial
Country of Production: USA
Blade: Carbon steel CPM-M4
Blade Finish: Black DLC
Handle: Natural G-10
Blade Length: 102mm.
Blade thickness: 3.3mm.
Length closed 140mm.
Total lenght: 241mm.
Thickness when closed: 15mm.
Weight: 122g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: limited edition made in February 2019 exclusively for a US retailer - discontinued, sold out and unobtainable - Direct link to manufacturer's datasheet: https://www.spyderco.com/catalog/details/C36GM4BK/1210C36GM4BK -
CRKT - Provoke Zap - Kinematic Morphing Karambit - 4041G - Knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade treatment: Blackwashed
Handle: Grivory
Blade length: 63mm.
Blade thickness: 5.4mm.
Length closed: 126mm.
Total length: 182mm.
Weight: 133g.
Closure: Side Lever (modified back lock)
Clip: Stainless steel, retractable
Package: Cardboard box with CRKT logos
Notes: Design by Joe CaswellCR4041G -
Tops - US Combat Tactical Knife - US-01 - knife
Intended use: Tactical / Military / Survival
Type of production: semi industrial
Blade: full tang in 1095 58HRC carbon steel
Blade finish: Black Traction Coating
Handle: Micarta
Blade length: 200mm.
Blade thickness: 6mm.
Total length: 345mm.
Balancing: advanced
Weight: 449g.
Sheath: Nylon
Notes: design by Laci SzaboTPUS01 -
Fox - Geco Titanium Flipper Frame by Bastinelli - FX-537SW - knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Stonewashed
Handle: Micarta and Titanium
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 122mm.
Total length: 210mm.
Thick when closed: 13mm.
Weight: 124g.
Opening: through Carson-Flipper system
Washers: in steel, with ball bearings
Closing: Framelock, with removable stainless steel leaf
Clip: stainless steel, deep carry type
Packaging: Cardboard box with Fox FKMD logos; Nylon zip sheath
Notes: Design by Bastinelli KnivesFX-537SW -
Ontario Knife Company - ASEK Survival System Foliage Green - 1410 - knife
ASEK KNIFE
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: Phosphated
Handle: in kraton, with tang and steel guard
Blade length: 127mm.
Blade thickness: 4.8mm.
Total length: 270mm.
Balancing: set back
Weight: 266g.
Sheath: nylon, modular, M.O.L.L.E compatible, with polypropylene interior and special compartment for the ASK Tool
Packaging: Cardboard box with OKC logos
Note: The survival system consists of a knife and an Asek Rescue Tool emergency toolASEK RESCUE TOOL
Blades: 420j2B stainless steel, HRC 54-56 hardness
Handle: aluminum
Total length: 170 mm
Notes: also equipped with a screwdriver / prybar and ceramic sharpenerON1410 -
Wander Tactical - Hurricane Lava Flow Custom - Bronze Finish and G10 Jade - folding knife
Single piece custom version of the standard Hurricane model - blade, folders, clips and screws modified by hand by the Wander Tactical knife designer Dino Picco - The finish of the "Bronze" blade is obtained through a natural oxidation process that takes place at the end of the hardening phase cryogenic.
Type of production: semi-industrial
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Lama treatment: Bronze flow
Manicure: Aluminum (alluminium)
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 215mm.
Balancing: set back
Weight: 187g.
Package: -
Notes: clip, blade lock Rockers Arm 8.11 - safety pinWT-HU-C -
Wander Tactical - Hurricane Custom Gate - Raw Finish and G10 Jade - folding knife
Unique piece custom version of the standard Hurricane model - blade, folders, clips and hardware modified by hand by the Wander Tactical knife designer Dino Picco
Type of production: semi-industrial
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Lama treatment: Black Blood
Manicure: Aluminum (alluminium)
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 215mm.
Balancing: set back
Weight: 187g.
Package: -
Notes: clip, blade lock Rockers Arm 8.11 - safety pinWT-HUR-GBB -
Wander Tactical - Megalodon Special Edition - Pitch Black & Jade G10 - custom knife
Type of production: Custom made
Blade production: Italy
Blade: D2 steel to 59 / 60HRC
Blade Treatment: GunKote
Manicure: Jade G10
Blade Length: 150mm.
Blade thickness: 6.5mm.
Total Length: 285mm.
Balancing: backward
Weight: 508g.
Sheath: in Kydex, thermoformed
Packing: -
Notes: "One of a Kind" Special EditionWT-MESEJ -
Viper - Golia Evoluzione by T. Rumici - Green Micarta - VT4003ECG - knife
Use: Light Utility
Type of production: Industrial
Production Country: Italy
Blade: Carbon steel D2 59 / 60HRC
Blade Treatment: Blackwash
Handle: Canvas Micarta
Blade length: 125mm.
Blade thickness: 5.8mm.
Overall length: 252mm.
Balancing: back 1cm
Weight: 280g.
Sheath: Nylon, compatible M.O.L.L.E. by Vega
Packaging: cardboard box with Viper and logos Tecnocut
Notes: Design by Tommaso RumiciVT4003ECG -
Fox - Grand Trapper - Black Hidroglider - FX-134GT - knife
Intended use: Survival / utlity
Type of production: Industrial
Production Country: Italy
Blade: Stainless Steel N690Co 58/60 HRC
Blade treatment: Black Hidroglider
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5mm.
Overall length: 310mm.
Balancing: Advanced to 2cm. by guard branch
Weight: 330g.
Sheath: Nylon, from thigh
Packaging: cardboard box with Fox logos
Notes: -FX-134BT -
Freeman Outdoor Gear - 3,25" Cobalt Field Knife 451 - Green Micarta - Knife
Introducing the new Model 451 full-tang fixed blade field knife, designed and made by Freeman Outdoor Gear LLC.
The CerakoteTM coated CPM-S35VN stainless steel drop point blade features a main flat grind with a thick secondary swedge for maximum toughness and piercing ability.
The exposed pommel acts as a flat hammering surface and includes a lanyard attachment hole sized for the included 550 cord lanyard. Additional milled grooves in the blade on the thumb rise provide a secondary gripping surface for extra control during delicate cuts.
The blade is cryogenically treated with a hardness of 59-61 Rc and the cutting edge is ground razor sharp at a 40 degree included angle (20 degrees per side).
The handle scales are CNC machined from tough G-10 or optional Canvas Micarta with milled grooves for a secure and comfortable grip. The handle shape provides an ergonomic and balanced grip for use in multiple positions. Stainless steel hardware locks all the components into place.
The custom Kydex thermo-formed sheath features a secure and tight friction fit with multiple attachment points for horizontal, vertical, PALS and 550 cord lashing/mounting options. Also available with a Spec-Ops Brand Combat Master (mini) fabric sheath.
This is a premium 100% US-made field knife designed to excel in multiple cutting chores under the most demanding conditions.
Cobalt Field Knife 451 - Green Micarta - Knife
Intended use: Tactical / Utility
Design: Jeff Freeman
Production Type: Semi-Handmade
Production Lama USA
Blade: stainless steel CPM-S35VN 59 / 60HRC
Treatment Blade: Cobalt Black Cerakote
Handle: Green Micarta
Blade length: 85mm.
Blade thickness: 4.8mm.
Overall length: 200mm.
Weight: 172g.
Sheath: Kydex with thickness
Packaging: Cardboard box with logos Freeman Outdoor451BODB -
Ka-Bar - Zombie Killer Chop Stick - 02-5704 - coltelli
Destinazione d'uso: collezione/sportivo
Tipo di produzione: industriale
Lama: in acciaio al carbonio SK-5
Trattamento Lama: teflonata
Manicatura: Forprene
Lunghezza lama: 230mm.
Spessore della lama: 5.5mm.
Lunghezza chiuso: -
Lunghezza totale: 370mm.
Bilanciatura: avanzata di 4cm dalla guardia
Peso: 568g.
Chiusura: -
Clip: -
Fodero: tattico in Cordura
Note: Coltello fisso di backup scheletrato, modello Ka-Bar Acheron, che trova spazio nella tasca frontale del fodero. Il coltello fornito con paracord di colore verde acido e di due guancette intercambiabili di colore nero5695 -
Fantoni - Hide Fixed Micarta - Design by T. Rumici
Nuova versione 2014, ora con fodero più compatto e robusto e con attacchi di tipo Tek-Lok
Destinazione d'uso: Fighter/Tattico/Collezione
Tipo di produzione: industriale
Lama: in acciaio inox CPM-S30V a 61-62HRC
Trattamento Lama: Stone Washed
Produzione Lama: Italia
Manicatura: Micarta tipo Loveless
Lunghezza lama: 80mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Bilanciatura: arretrata ad 1cm. dal ramo di guardia inferiore
Peso: 69g.
Chiusura: -
Clip: in acciaio
Fodero: in Kydex, con attacco tipo Tek-Lok
Note: Design by T. Rumici7280S -
Fox - Miles Combat Trooper - FX-0171103 - coltello
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co
Trattamento Lama: Nitrurazione al Titanio
Manicatura: Forprene
Lunghezza lama: 135mm.
Spessore lama: 5mm.
Lunghezza chiuso:-
Lunghezza totale: 275mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 220g.
Chiusura: -
Clip: -
Fodero: Kydex e Cordura
Confezione: Scatola con loghi Fox
Note: -7736 -
Fox - Pro Hunter Fixed - Green Micarta - FX-131MGT - knife
Intended use: Utility / Tactical
Type of production: Industrial
Country of production: Italy
Blade: In N690Co 58 / 60HRC stainless steel with Black Idroglider finish
Handle: Green Canvas Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balancing: advanced to 1cm
Weight: 190g.
Sheath: leather
Packaging: cardboard box with Fox logos
Note: -FX-131MGT -
Gerber - Prodigy Tanto Urban Camo 0558 - coltello
Destinazione d'uso: Militare
Tipo di produzione: industriale
Lama: in acciaio inox 12C27 punta tanto
Trattamento Lama: TiNi - Nitrurazione al Titanio
Produzione Lama: USA
Manicatura: antiscivolo in fiberglass e nylon
Lunghezza lama: 120mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 245mm.
Bilanciatura: arretrata di 1cm.
Peso: 205g.
Fodero: in Nylon e polimeri antiscivolo fire retardant, camo
Note: Skullcrasher/Martello4616T -
Hogue - EX-01 4" Folding Drop Point Stonewash - Aluminum Matte OD Green coltello
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: in acciaio inox 154CM a 58/60HRC
Trattamento Lama: Stonewashed
Manicatura: alluminio
Lunghezza lama: 108mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 127mm.
Lunghezza totale: 227mm.
Spessore da chiuso: 16mm
Bilanciatura: -
Peso: 160g
Chiusura: Button Lock con sistema di sicurezza
Clip: in Acciaio Inox Stonewashed
Fodero: -
Confezione: Scatola di cartone con loghi Hogue
Note: Design by Allen Elishewitz7895 -
Ka-Bar - Impact Serie Large Spear/Eagle - 02-1461 coltello
Destinazione d'uso: tattico/militare
Tipo di produzione: industriale
Provenienza Lama: USA
Lama: in acciaio D2
Trattamento Lama: teflonatura
Manicatura: micarta
Lunghezza lama: 110mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 245mm.
Bilanciatura: arretrata a 2cm
Peso: 240g.
Chiusura: -
Fodero: cordura
Note: -5688 -
Pohl Force - Oberland Arms knife CT1 - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici Pohl Force
Se hai un negozio, e vuoi commercializzare questo prodotto, inviaci una e-mail a [email protected] e riceverai il listino con i prezzi a te riservati.
Destinazione d'uso: Tattico, collezione
Tipo di produzione: Industriale
Lama: Made in Italy, by Fantoni - in acciaio inox N690Co
Trattamento Lama: stone wash
Lunghezza lama: 89mm.
Spessore lama: 5mm.
Impugnatura: Green Canvas Micarta
Lunghezza totale: 203mm.
Bilanciatura: arretrata di 1cm dal ramo di guardia
Peso: 138g.
Fodero: in kydex
Confezione: astuccio in nylon con cerniera, patch ricamata, adesivi e scatola di cartone con loghi Pohl Force
Note: antenato del Charlie One, questo coltello è ormai fuori produzione e non più reperibile sul mercato; inizialmente disegnato e commercializzato appositamente per l'azienda tedesca Oberland Arms OHG7252CT1 -
Tops - ALRT Anywhere Last Resort Tool XL - 03 Tanto Plain Black coltello
Destinazione d'uso: militare
Tipo di produzione: semi industriale
Lama: full tang in acciaio al carbonio 1095
Produzione Lama: USA
Manicatura: Micarta
Lunghezza lama: 35mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 135mm.
Bilanciatura: -
Peso: 104g.
Chiusura: -
Clip: -
Fodero: Kydex
Note: -5752 -
Tops - ALRT Anywhere Last Resort Tool XL - 05 Hunter Plain Black - coltello
Destinazione d'uso: militare/sportivo
Tipo di produzione: semi industriale
Produzione Lama: U.S.A.
Lama: full tang in acciaio al carbonio 1095
Trattamento Lama: -
Manicatura: Micarta con spaziatori bianchi
Lunghezza lama: 68mm.
Spessore lama: 5mm.
Lunghezza chiuso -mm.
Lunghezza totale: 135mm.
Spessore da chiuso: -mm.
Bilanciatura: -
Peso: 100g.
Chiusura: -
Clip: -
Fodero: Kydex, di serie moschettone e catenella
Confezione: -
Note: -TPXL05 -
Tops - ATM American Trail Master - Hunter Plain Black coltello
Destinazione d'uso: militare
Tipo di produzione: semi industriale
Lama: full tang in acciaio al carbonio 1095
Produzione Lama: USA
Manicatura: Micarta
Lunghezza lama: 95mm.
Spessore della lama: 6mm.
Lunghezza chiuso: -
Lunghezza totale: 230mm.
Bilanciatura: -
Peso: 445g.
Chiusura: -
Clip: -
Fodero: Kydex
Note: -5744 -
Tops - B.E.S.T. - Black Eagle Strike Team - BEST Micarta - coltello
Nuova versione 2014, con acciaio 5160
Questo coltello è stato progettato per il reparto speciale BEST "Black Eagle Strike Team".Questa unità può rapidamente raggiunge e operare in qualsiasi ambiente, individuando, distruggendo o sabotando le linee nemiche, i radar, le stazioni missilistiche.
Destinazione d'uso: hard Utility
Tipo di produzione: Semi-Industriale
Produzione Lama: USA
Lama: in acciaio al carbonio 5160
Trattamento Lama: Heat Treated 2XBlack Traction Coating
Manicatura: Micarta
Lunghezza lama: 175mm.
Spessore lama: 7mm.
Lunghezza totale: 315mm.
Bilanciatura: arretrata, ad 2cm. dal ramo di guardia
Peso: 538g.
Fodero: combat ballistic nylon
Confezione: busta con certificati di garanzia e numeri di serie5801 -
Tops - Black Rhino knife - Plain Black knife
Intended use: military
Type of production: semi industrial
Blade: full tang in 1095 carbon steel
Production Lama: USA
Handle: Micarta
Blade length: 135mm.
Blade thickness: 6mm.
Closed Length: -
Total length: 270mm.
Balancing: on the guard branch
Weight: 415g.
Closure: -
Clip: -
Sheath: Kydex
Note: -TOPS-RHINO -
Tops - Condor Alert - Hunter Plain Black coltello
Destinazione d'uso: militare
Tipo di produzione: semi industriale
Lama: full tang in acciaio al carbonio 1095
Produzione Lama: USA
Manicatura: Micarta
Lunghezza lama: 240mm.
Spessore della lama: 6mm.
Lunghezza chiuso: -
Lunghezza totale: 375mm.
Bilanciatura: avanzata - 2.5cm. dal ramo di guardia
Peso: 630g.
Chiusura: -
Clip: -
Fodero: Cordura
Note: -5740 -
Tops - D.A.R.T. - Direct Action Rescue Team - knife
New Version 2014 with 5160 steel
Tops Knives - D.A.R.T. (Direct Action Rescue Team)
Type of production: semi-industrial
Blade: Carbon Steel 5160
Handle: Micarta
Blade Length: 190mm.
Overall Length: 330mm.
Blade thickness: 6mm.
Length Closed: -
Weight: 430g.
Closure: -
Sheath: Cordura
Notes: full tang5710 -
Tops - Desert Son - coltello
Destinazione d'uso: Tattico / Backup
Tipo di produzione: Semi-Industriale
Produzione Lama: USA
Lama: full tang, in acciaio al carbonio 1095 58HRC
Trattamento Lama: BTC - Black Traction Coating
Manicatura: Black Canvas Micarta
Lunghezza lama: 80mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 167mm.
Spessore da chiuso: -
Bilanciatura: arretrata, a 2cm.
Peso: 126g.
Chiusura: -
Clip: -
Fodero: in Kydex, con clip multiposizione
Note: -5790 -
Tops - Firestrike - Hunter Plain Black - coltelli
Destinazione d'uso: militare
Tipo di produzione: semi industriale
Lama: full tang in acciaio al carbonio 1095
Produzione Lama: USA
Manicatura: Micarta
Lunghezza lama: 160mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 280mm.
Bilanciatura: sul ramo di guardia
Peso: 325g.
Chiusura: -
Clip: -
Fodero: Cordura
Note: -5743 -
Tops - Nite Chaser - Hunter Plain Gray coltello
Destinazione d'uso: sportivo/militare
Tipo di produzione: semi industriale
Lama: full tang in acciaio inox 154CM 58HRC
Produzione Lama: USA
Manicatura: Micarta
Lunghezza lama: 90mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 200mm.
Bilanciatura: arretrata, a 2cm dal ramo di guardia
Peso: 120g.
Chiusura: -
Clip: -
Fodero: Cuoio Marrone
Note: -5754 -
Tops - SWAT Spike - Plain Black coltello
Destinazione d'uso: militare
Tipo di produzione: semi industriale
Lama: full tang in acciaio al carbonio 1095
Produzione Lama: USA
Manicatura: Paracord
Lunghezza lama: 120mm.
Spessore della lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 245mm.
Bilanciatura: -
Peso: 176g.
Chiusura: -
Clip: -
Fodero: Kydex
Note: -5753 -
Tops - Tom Brown - The Tracker knife - TPT010 - knife
Intended use: Tactical / Military / Survival
Type of production: industrial seeds
Blade: 1095 58HRC carbon steel
Handle: Micarta
Blade length: 160mm.
Blade thickness: 6mm.
Length closed: - mm.
Total length: 302mm.
Balancing: coinciding with the lower guard branch
Weight: 585g.
Closure: -
Clip: -
Sheath: kydex, tactical with double multiposition clips
Notes: Design by Tom Brown, used in the movie The Hunted with Benicio Del Toro, entirely handmade in the USA, each knife is numbered and accompanied by a certificate of guarantee and authenticity.TPT010 -
Tops - Tom Brown Mini Tracker - TBT040 coltello
Destinazione d'uso: Collezione/Survival
Tipo di produzione: semi industriale
Produzione Lama: USA
Lama: in acciaio al carbonio 1095 58HRC
Trattamento Lama: BTC - Black Traction Coating
Manicatura: micarta con spaziatori rossi
Lunghezza lama: 85mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 165mm.
Spessore da chiuso: -
Bilanciatura: sul ramo di guardia
Peso: 92g.
Chiusura: -
Clip: -
Fodero: in kydex, tattico con clip multiposizione
Confezione: -
Note: Design by Tom Brown, versione extra small del coltello utilizzato nel film The Hunted con Benicio Del Toro, ogni pezzo è numerato ed accompagnato da certificato di garanzia ed autenticità.5787S -
Tops - Tom Brown Tracker T-2 - coltello
Destinazione d'uso: Tattico/Militare/Survival
Tipo di produzione: semi industriale
Produzione Lama: USA
Lama: in acciaio al carbonio 1095 58HRC
Trattamento Lama: BTC - Black Traction Coating
Manicatura: micarta con spaziatori rossi
Lunghezza lama: 126mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 241mm.
Spessore da chiuso: -
Bilanciatura: sul ramo di guardia
Peso: 286g.
Chiusura: -
Clip: -
Fodero: in kydex, tattico con doppia clip multiposizione
Confezione: -
Note: Design by Tom Brown, versione small del coltello utilizzato nel film The Hunted con Benicio Del Toro, ogni pezzo è numerato ed accompagnato da certificato di garanzia ed autenticità.5787 -
Viper - Fate - Stonewashed e Micarta Verde - by Fabrizio Silvestrelli - VT4005SWCV - coltello
Destinazione d'uso: Tattico/Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: in acciaio D2
Trattamento Lama: Stonewashed
Manicatura: Canvas Micarta
Lunghezza lama: 175mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 315mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 324g.
Chiusura: -
Clip: -
Fodero: Nylon
Confezione: scatola di cartone con loghi Viper
Note: Design by Fabrizio "Silvester" Silvestrelli2853SV