knives new life

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory



The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.

Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory



Use: Tactical / Military

Blade: Stainless steel 154CM 58/60 HRC with PVD treatment
Handle: Zytel
Blade length: 95 mm.
Blade thickness: 3 mm.
Total length: 220 mm.
Length closed: 125 mm.
Weight: 115 g.
Clip: stainless steel
Locking system: liner lock with additional safety lock

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Conditions: in excellent conditions
Available in the market: NO
Sharpening: Original
Marks on blade: NO
Marks on handle: NO
Packaging: NO, without original box
Checked and Certified by our internal laboratory
Intended use: Tactical/Military

Blade: in 154CM stainless steel
Blade Production: USA
Handle: Zytel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balancing: -
Weight: 113g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: without box

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production single piece produced in 2019
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: -
* Sheath: no
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratory

Intended use: Collection

Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: full-tang stainless steel RWL-34 60 / 61HRC
Blade treatment: -
Handle: holographic resin handle with titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Closed length: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 132g.
Closure: Liner Lock
Clip: -
Sheath: -
Packaging:
Notes: Handmade by Master Sergio Consoli - knife number 480 made in 2019

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available: Discontinued, replaced by new variants in different steels
* Sharpening: Factory sharpened
* Marks on blade: No
* Marks on handle: No
* Box: Yes, original, in perfect condition
* Scabbard: -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / Collection 

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade treatment: Microbead blasted
Handle: Duralumin A7075 
Blade length: 152mm.
Blade thickness: 4mm.
Length closed: 178mm.
Total length: 330mm.
Thickness when closed: 22mm.
Weight: 258g.
Closure: LinerLock type
Clip: removable, painted stainless steel
Notes: discontinued knife, like new, withdrawn from private collection

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Commercially available: no longer in production since 2014
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original ZT box
* Manuals, Certificates and Guarantees: ZT certificates
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Tactical / Military

Type of production: Industrial
Production Lama: USA
Blade: CPM-S30V steel
Blade treatment: Tungsten DLC Coating
Handle: Black anodized aluminum with non-slip Trac-Tec inserts
Blade length: 925mm.
Blade thickness: 4mm.
Closed length: 126mm.
Total length: 215mm.
Thick when closed: 17mm.
Balancing: -
Weight: 146g.
Closure: Liner Lock
Clip: Removable, Multiposition, in stainless steel
Sheath: -
Packaging:
Notes: Design by Ken Onion - SpeedSafe opening system

Knife withdrawn from private collection - Rare model produced by Master of Defense around late 90s/early 00s and designed by James "Patches" Watson - Excellent condition. Never resharpened - No original box - Checked and certified by our workshop.

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.

Intended Use: Tactical/Collection
Production type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM black
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed: 112mm
Total length: 200mm.
Thickness when closed: 13mm
Weight: 116g.
Closure: Liner Lock
Clip: removable, stainless steel
Notes: knife withdrawn from private collection in excellent condition

Knife withdrawn from private collection - "TD" version now discontinued and no longer available - Overall in good condition - Shows small marks on both blade and handle, but nothing that compromises its actual use - Original factory sharpening still in good condition, definitely can be improved - Accompanied by original Extrema Ratio box and certificates and warranties - Checked and certified by our in-house laboratory.

Type of manufacture: industrial
Blade: stainless steel N690Co 58HRC
Country of manufacture: Italy
Handle: Anticorodal
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 99mm.
Total length: 168mm.
Weight: 82g.
Closure: Liner Lock
Clip: reversible and removable stainless steel
Notes: knife withdrawn from private collection, overall in good condition

Knife withdrawn from private collection. Overall in good condition shows small marks on clip, hardware and handle - Original factory sharpening in good condition - Complete with original Extrema Ratio cardboard box - Checked and certified by our in-house laboratory. 

Intended Use: Tactical/Sportsman

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924
Handle: rough anticorodal (aluminum)
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 15mm.
Weight: 139g.
Closure: Liner Lock, with additional safety catch
Clip: Removable and reversible stainless steel
Packaging: cardboard box with Extrema Ratio logos

Knife withdrawn from a private collection, in like new condition with original box and certificate - Model dating back to the late 90s "made by Klotzli from the famous American designer Michael Walker. Knife that combines two qualities that are difficult to match, especially in those years; lightness and strength. Elegant gentleness, easy to open and close with one hand thanks to the Liner-Lock system invented by Walker himself

Checked and certified by our internal laboratory Coltelleria Collini.

Intended use: sports / collection

Type of production: industrial
Country of production: Switzerland
Blade: ATS-34 stainless steel
Blade finish: Satin finish
Handle: Titanium
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 170mm.
Weight: 74g.
Closure: LinerLock
Clip: in stainless steel, removable
Notes: Design by Michael Walker

Knife taken from private collection - Rare Spyderco model produced in December 1997 - Absolutely like new, with original box, never taken out of the box and never used - Checked and certified by our internal laboratory.

Intended Use: Collection/Sporting

Production Type: Industrial
Country of Production: Japan
Blade: AUS-8 Stainless Steel
Handle: Micarta and Steel
Blade Length: 82mm.
Blade Thickness: 3mm.
Length closed: 114mm.
Total length: 196m.
Weight: 98g.
Closure: Liner Lock
Clip: Stainless steel
Package: original box with Spydero logos
Notes: knife made in 12/97, new, never used, with original box.

Knife acquired from a private collection - Overall in very good condition, with factory sharpening - Rare version, one of the first, with flat G10 handle - Hardened by Paul Bos, with logo present on the right heel of the blade - It has some small signs of abrasion on the tigerstripe finish, common to all Strider knives - Checked and certified by our internal laboratory.

Intended Use: Tactical

Manufacturing Type: Mid Tech (semi-craft)
Country of Production: USA
Blade: Stainless steel CPM-S30V hardened by Paul Bos
Blade Treatment: Tiger Stripe
Handle: G10 flat with 2mm titanium liners
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thickness closed: 18mm.
Weight: 228g.
Closure: Liner Lock
Clip: Titanium 
Package: Nylon pouch with zipper 
Notes: Rare version, one of the first, with G10 flat grip - Hardened by Paul Bos, with logo on the right heel of the blade

Knife withdrawn from a private collection - Rare model produced by the Master of Defense around 2001 - Excellent condition. Never resharpened - Without original box - Checked and certified by our internal laboratory Coltelleria Collini.

Tactical / EDC knife manufactured in the late 1990s and designed by martial arts expert Michael Janich,

Master of Defense, an eclectic American brand no longer in business and later taken over by Blackhawk! Blades, produced various tactical and military type folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.

The only copy at our disposal, without box, very rare and out of production for many years.

Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel
Handle: Aviation aluminum with Kraton anti-slip inserts
Blade length: 86mm.
Blade thickness: 3.5mm.
Closed length: 112mm
Total length: 200mm.
Thick when closed: 13mm
Weight: 120g.
Closure: Liner Lock
Clip: removable, in stainless steel
Packaging:

Knife collected from private collection - 2014 model entirely handmade by Allen Elishewitz - Like new, original sharpening - Supplied with nylon pouch with velcro - Checked and certified by our internal laboratory Coltelleria Collini.

Intended use: Collection 

Kind of production: Handmade
Country of production: USA
Blade: handcrafted and beveled, in CTS-C75P stainless steel (Latrobe BG-42)
Blade treatment: handmade satin finish with Allen Elishewitz golden punch
Handle: titanium liners "crushed ice" with carbon fiber and copper grips with handmade bronze bolsters
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total lenght: 223mm.
Thickness when closed: 16mm.
Weight: 199g.
Closure: Liner Lock
Clip: Removable, inegral carbon fiber
Notes: Entirely handcrafted by Allen Elishewitz - 2014 model, like new - from private collector - Supplied with nylon velcro pouch.

Intended use: Collection

Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018

Acknowledgments

Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:

in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"

always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"

I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade

then in 2007 at "Scarperia" I won the third prize for best folding

but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.

Presentation of the craftsman

Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.

The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!

I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.

Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.

What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".

They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .

The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.

Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.

With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.

I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".

Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.

For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.

Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...

Collector's knife from a private collection - Daghetta model made by the famous Italian knifemaker Max around the early 2000s - Like new condition - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Collection / Gentleman

Type of production: Artisan
Lama production: Italy
Blade: Damasteel 61/62 Hrc damascus steel
Blade treatment: -
Handle: damasteel damask bolster, carbon fiber with titanium liners
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 129g.
Closing: Liner Lock
Clip: in damasteel damask
Sheath: -
Notes: ONE PIECE - custom knife handcrafted by Max

Massimiliano Salice Sanna, called Max is a master knife maker "of the first hour", active for a quarter of a century. Specialized in the construction of folding knives, he is constantly looking for new materials and innovative techniques. Max is a master of the Italian guild of knife makers, born in 1958, a Roman by birth and a Tuscan by adoption.

Intended use: Collection

Type of production: Artisan by Maestro CIC Sergio Consoli
Lama production: Italy
Blade: full-tang in RWL-34 60 / 61HRC stainless steel
Blade treatment: -
Handle: carbon fiber
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 138g.
Closing: Liner Lock
Clip: carbon fiber
Sheath: -
Packaging:
Notes: Handmade by Maestro Sergio Consoli - knife number 271 made in 2009

Acknowledgments

I currently make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:

in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded the "best table on display"

always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"

moreover, I ranked second in the competition organized by LAME D'AUTORE magazine as the best fixed hunting blade

then in 2007 at "Scarperia" I won the third prize as the best closable

but above all again in 2007, I achieved, to my great satisfaction, the level of MASTER OF ITALIAN COLTELLINAI CORPORATION, recognition received at the first exam taken.

Presentation of the craftsman

Creating a hand knife is what I consider a real art form.
The satisfaction of seeing an object that comes from your own hands, that takes shape and that reaches mechanical, artistic and aesthetic perfection is what pays me more for all the hours of work and effort it takes to create a knife completely by hand.

The passion for "cutting irons" has always been in me since I was a child and has grown with me until the almost sudden decision to build my first knife on my own, it was a "need", almost an inner need that I couldn't put it off, my hands and my mind had to start creating, of course what I had always been passionate about ... the knife!

I started at 40, in 2003, practically self-taught, I had no manual work experience, but I had been a mechanical designer for many years and this allowed me to know perfectly the technique and all the various stages of mechanical processing.

Currently I am a member, with the rank of Maestro, which is the highest, of the Italian Knifemakers Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.

What I do now is what I consider my art form ..., to create "handmade, hunting and collectible knives".

They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I make above all folding knives, which satisfy more my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they cannot be seen, is what distinguishes a hand-made knife from an industrially made one .

The mechanics must then be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.

Of course, over the years I have refined my technique and currently I have improved even more the mechanics by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction and with an incredible sweetness.

With regard to the blades, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow exceptional wire holding and cutting quality for all types of use.

Pathically I make all the knives on my initial design, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "handmade".

Regarding the materials that I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damask, both stainless steel and carbon, for the uniqueness 'that they donate to the knife, since each damask is always different from another.

For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of colors, all beautiful, I also use the fossil ivory of mammoth, various briars, titanium and carbon fiber.

Most of the knives, however, are made entirely of steel, in order to then be engraved, always and rigorously by hand, to transform the knife even more into a real work of art ...

Rare knife handcrafted by Bob Dozier in 2001, made of D2 steel with sandblasted titanium handle and anodized details.

Intended use: Collection

Type of production: handmade
Country of production: USA
Blade: in D2 steel at 61HRC
Blade treatment: satin finish
Handle: in titanium with anodized details
Blade length: 105mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 250mm.
Weight: 170g.
Closure: Liner Lock
Clip: titanium, removable
Notes: made entirely by hand by Bob Dozier in 2001

Custom by Kevin Wilkins from 2005 from a private collection provided with original certificates signed by the craftsman.

Slight regrinding, perfectly centered blade with good retention from closed, fluid opening movement and blade without any horizontal or vertical clearance once opened. The frame lock engages in the first quarter of the race without any uncertainty and without sticking.

Globally in good condition, it shows some small marks on the G11 handles and on the back and belly of the liners. A small abrasion on the blade, on the right side near the tip of the knife.

Intended use: collection

Type of production: artisanal
Country of production: Germany
Blade: CPM-S90V stainless steel
Finish: Satin
Handle: jade Titanium and G11
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 110mm.
Total length: 188mm.
Thick when closed: 15.8mm
Weight: 158g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: with original warranty certificates - produced in March 2005 - from a private collection

Intended use: Emergency and survival multi-purpose knife

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Finish: Testudo burnishing
Handle: anticorodal anodized aluminum
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 210mm.
Weight: 152g.
Sheath: -
Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificates
Notes: emergency blade with snap opening (length 8 cm) - window breaker - 2013 model now out of production

Intended use: collection

Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin finish
Handle: titanium and carbon fiber
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm
Balancing: -
Weight: 94g.
Closure: Liner Lock
Clip: in titanium
Sheath: -
Notes: production early 2000s, withdrawn from a private collection

Intended use: Collection / Gentleman

Type of production: Artisan
Lama production: Japan
Blade: Cowry-Y stainless steel
Blade treatment: -
Handle: Mother of Pearl
Blade length: 87mm.
Blade thickness: 2.5mm.
Length closed: -
Total length: 195mm.
Thick when closed: 11mm.
Balancing: -
Weight: 82g.
Closure: Liner Lock
Clip: -
Sheath: -
Package: -
Notes: model entirely handmade by Master Koji Hara

Winner in 2016 at the Blade Show in Atlanta as "Overall Knife of the Year"

Metamorphosis handle: it is an aluminum handle with a special heat-sensitive coating. Normally the handle is black, but when the temperature reaches 22-23 ° C, it changes color! If you hold the knife in your hand for a couple of minutes, the black handle will become Camouflage.

Given the production difficulty of the handle and the extreme delicacy of the same, the production of this variant ceased definitively in 2017. The first production was characterized by the presence of the clip, the second production proposed a knife without a clip, but accompanied by a sheath a leather.

Intended use: Sports / EDC

Type of production: Industrial
Lama production: Italy
Blade: Sleipner 60 / 61HRC steel
Blade treatment: Stonewashed
Handle: Aluminum with titanium spacers
Blade length: 87mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Weight: 175g.
Closure: Liner Lock
Sheath: in leather, with automatic button and belt loop for vertical port
Packaging: Cardboard box with Lion Steel logos
Notes: Design by Molletta - Carson Flipper opening system - Opening on IKBS ball bearings

VALUTAZIONE DEL PRODOTTO

Stato di Conservazione / Grade of preservation: A+
Scatola e certificati / Box and papers: Y
Reperibilità / Availability: B
Valore storico / Historical value: A
Valore collezionistico / Collectible value: B

CLICCA QUI per leggere e conoscere i nostri criteri di valutazione

Intended use: Sports / Collection

Type of production: handmade
Country of Origin: USA
Blade: D2 steel 61HRC
Blade treatment: satin finish
Handle: Micarta black and burgundy, folders and spacers Titanium
Blade length: 102mm.
Blade Thickness: 3.5mm.
Closed Length: 133mm.
Overall length: 234mm.
Weight: 212g.
Lock: Liner Lock
Clip: -
Notes: made entirely by hand by Bob Dozier in 2013

Intended Use: Collection

Type of production: handmade
Country of Origin: USA
Blade: handmade by Rob Thomas, In Damascus steel 440C and CPM154 with Basketweave pattern
Blade treatment: -
Handle: fossil mammoth ivory with liners of titanium and damascus spacer
Blade length: 91mm.
Blade thickness: 2.5mm.
Closed Length: 115mm.
Overall length: 205mm.
Thick when closed: 11mm.
Weight: 56g.
Lock: liner lock
Clip: Titanium
Notes: Entirely handmade by Brad Zinker

Craft knife produced by the famous Master cutler Italian Salice Max Sanna.

This model called Wave, uses the Japanese steel sintered SPG2 damask laminated to 69 layers.

Intended Use: Collection / Gentleman

Type of production: Artisan
Production Lama: Italy
Blade: Stainless sintered SPG2 in DAMACO rolled 61/62 HRC
Blade treatment: -
Handle: Canvas Micarta
Blade length: 73mm.
Blade thickness: 3mm.
Closed Length: 90mm.
Overall length: 170mm.
Thick when closed: 15mm.
Balancing: -
Weight: 92g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Notes: ONE PIECE - knife custom crafted by Max

For more information you can view the site sull'accaio used: www.collinisteel.com

Intended Use: Tactical

Type of production: Semi-Craft
Production Lama USA
Blade: Stainless steel CPM-S30V
Treatment Blade: Tiger Stripe
Handle: with G10 scales with titanium liners 2mm
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thick when closed: 18mm.
Balance: -
Weight: 244g.
Lock: Liner Lock
Clip: Titanium
Sheath: -
Packaging: -
Notes: Hardened by Paul Bos, with logo on the right heel of the blade

Destinazione d'uso: Sportivo / Collezione
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: in acciaio inox BG42
Manicatura: Titanio e Green Linen Micarta
Lunghezza lama: 100mm.
Spessore lama: 4mm.
Lunghezza chiuso: 140mm.
Lunghezza totale: 240mm.
Spessore da chiuso: -
Peso: 190g.
Chiusura: Liner Lock
Clip: in acciaio inox
Confezione: privo di confezione o certificati, come fornito dalla stessa azienda produttrice

Intended Use: Tactical

Type of production: Semi-Craft
Production Lama USA
Blade: Stainless steel CPM-S30V
Treatment Blade: Tiger Stripe
Handle: with G10 scales with titanium liners 2mm
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thick when closed: 18mm.
Balance: -
Weight: 244g.
Lock: Liner Lock
Clip: Titanium
Sheath: -
Packaging: -
Notes: Hardened by Paul Bos, with logo on the right heel of the blade

Intended use: Collection / Gentleman

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel ATS34
Treatment Lama: -
Handle: Red Stamina
Blade length: 67mm.
Blade thickness: 3mm.
Closed Length: 90mm.
Total length: 154mm.
Thick when closed: 13mm.
Balance: -
Weight: 55g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Notes: ONE PIECE - handmade custom knife by Max

Blade: 61HRC RWL34 Stainless Steel
Handle: Walnut, Damascus and Titanium
Blade Lenght: 75mm.
Blade Thickness: 4mm.
Overall Lenght: 180mm.
Weight: 110g.
Lock: Liner lock
Clip: -
Sheath: -
Notes: Handmade in Italy by CIC Master Sergio Consoli

Intended use: Sports / Collection

Type of production: handmade
Country of Origin: USA
Blade: D2 steel 61HRC
Blade treatment: satin finish
Handle: White Westinghouse Micarta with red lines, folders and spacers Titanium
Blade length: 77mm.
Blade thickness: 3.5mm.
Closed Length: 100mm.
Overall length: 178mm.
Weight: 102g.
Lock: Liner Lock
Clip: titanium, removable
Notes: totally handmade by Bob Dozier in 2011

Destinazione d'uso: Collezione/Gentleman

Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: In acciaio inox Cowry-Y
Trattamento Lama: -
Manicatura: Madreperla e acciaio inox 316
Lunghezza lama: 60mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: -
Lunghezza totale: 81mm.
Spessore da chiuso: 9mm.
Bilanciatura: -
Peso: 60g.
Chiusura: Liner Lock
Clip: -
Fodero: -
Confezione: -
Note: Inserti in madreperla sul dorso del coltello - modello interamente realizzato a mano dal Maestro Koji Hara