knives new life
-
Gerber - 425 Hunting Knife - Vintage 1972 - PRIVATE COLLECTION - knife
Vintage knife produced in Portland in 1972 characterized by an extremely penetrating full flat type of sharpening, designed specifically for hunting use - Knife withdrawn from private collection - Overall in very good condition - Never used, a few small marks on the leather sheath, due to the passage of time - Free of packaging - Checked and certified by our internal laboratory Coltelleria Collini
Intended use: Collection / Vintage / Hunting
Type of production: industrial
Country of manufacture: USA
Blade: 440C stainless steel
Blade finish: mirror polish
Handle: stainless steel guard and pommel, brass spacers, macassar ebony handle
Blade length: 115mm.
Blade thickness: 3mm.
Total length: 225mm.
Balance: backward
Weight: 191g.
Sheath: leather
Packaging: -
Notes: Vintage knife from 1972 - Withdrawn from private collection globally in very good condition - UnpackedGE-425HKV -
Puma - Defender LM - 154CM Limited Edition - 14 6481 - PRIVATE COLLECTION - knife
Iconic knife produced by Puma and dating back to the late 1980s, characterized by a then very modern line and a very advanced steel for the time (154CM). Knife withdrawn from private collection - Overall in very good condition - Never used, never sharpened, still with factory sharpening - A few small marks on the right side handle, in concomitance with the sheath that goes to hook the knife through a pin that tends to irreparably rub the handle itself - Supplied with original wooden case and leather sheath - Checked and certified by our internal laboratory Coltelleria Collini
Intended use: Collection / Vintage / Tactical
Type of production: handcrafted
Country of manufacture: Germany
Blade: stainless steel 154CM
Blade finish: satin-finished
Handle: Integral, stainless steel and Micarta
Blade length: 160mm.
Blade thickness: 5.5mm.
Total length: 290mm.
Balance: backward
Weight: 285g.
Sheath: leather
Packaging: wooden case
Notes: 1980s Vintage knife - Limited edition of only 500 pieces, numbered on the blade, specimen 170 of 550 - Knife withdrawn from private collection globally in excellent conditionPU-DEFLM-CP -
Gerber - BMF - Basic Multi Function 8 teeth - survival knife - vintage - PRIVATE COLLECTION - tactical knife
Famous knife produced by Gerber and dating from around the 1980s, discontinued in 1999. Version with 8 teeth serration on the back. Knife taken from a private collection: very good condition. Without cardboard box. Checked by our in-house laboratory Coltelleria Collini
Intended use: Military
Type of production: industrial
Blade: AUS-8 stainless steel
Blade treatment: micro-peening
Country of manufacture: USA
Handle: Hypalon
Blade length: 200mm. (edge length 175mm.)
Blade thickness: 6mm.
Total length: 342mm.
Balance: on the guard
Weight: 433g. (775g. including scabbard)
Notes: Serial number 006282 - In the pocket on the scabbard is the original compass - NO BOX
Scabbard: ABS and CorduraTranslated with www.DeepL.com/Translator (free version)
GE-BMF-CP-1 -
Buck Custom - Stag Horn Hunting Fixed Blade - PRIVATE COLLECTION - knife
Collected from a private collection, this Custom model of the American Buck made prior to 1986 is numbered on the blade with serial number 0023 - Never used and never resharpened, overall in excellent condition - Devoid of packaging and certificates, supplied with its own brown leather sheath - Distinguished by its full tang construction, prominent brass guard and beautiful stag handle with finger grooves - Checked and certified by our in-house laboratory Coltelleria Collini.
Intended Use: Collection / HuntingType of production: handcrafted
Country of production: USA
Blade: full tang in 420HC stainless steel with concave rounding
Blade finish: mirror polish
Handle: brass guard and deer handle with finger grooves
Blade length: 134mm.
Blade thickness: 5mm.
Total length: 258mm.
Weight: 325g.
Sheath: leather
Packaging: -
Notes: Pre-1986 specimen withdrawn from private collection - Custom series, numbered version on blade, specimen number 0023 - Never used, never resharpened, in excellent conditionBU-CUSHFG -
Timberline - Aviator Pilot Survival Knife - Tanto Chisel Blade - TM94021 - PRIVATE COLLECTION - knife
Knife from a private collection - Very rare and highly sought after discontinued model dating back to 2000 - Peculiar tanto blade with chisel sharpening - This is a scaled down version of Timberline's Specwar model made in collaboration with Emerson - Like new, never used, perfect in every detail, with warranty and immaculate box - Checked and certified by our in-house laboratory.
Intended Use: Tactical / CollectionType of manufacture: Industrial
Country of Production: USA
Blade: 440C stainless steel with chisel sharpening
Blade finish: matte microbead blasting
Handle: Nylon and Fiberglass
Blade length: 95mm.
Blade thickness: 2.5mm.
Total length: 220mm.
Weight: 105g.
Sheath: Kydex
Notes: 2000 knife from a private collection - Like newTM94021 -
Buck - Model 500 - 1987 Canadian Loon - Limited Edition - PRIVATE COLLECTION - knife
Withdrawn from a private collection, this American Buck Model 500 made in 1987 turns out to be exclusive because of the gold leaf engraving on the blade commemorating the Loon, the iconic swimming bird of Ontario, Canada, and the limited edition of only 250 pieces - Like-new condition, never used, with original Buck warranties and manuals and accompanying 1987 Canadian $1 coin, also dedicated to the Loon - Checked and certified by our in-house Coltelleria Collini laboratory.
Intended Use: CollectionType of production: Industrial
Blade Production: USA
Blade: Engraved 420HC stainless steel
Blade Finish: Polishing
Handle: Walnut wood and Alpacca (Nickel and Silver alloy)
Blade Length: 78mm.
Blade thickness: 2.5mm.
Length closed: 111mm.
Total length: 187mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Back Lock
Package: wooden box, original care and maintenance manuals and warranty certificate of the time
Notes: Limited edition made in only 250 numbered examples on the blade (example 169 of 250) - 1987 specimen withdrawn from private collection, in like-new condition.BU-500CL -
Meyerco - The Strut'N'Cut First Production Run by Blackie Collins - PRIVATE COLLECTION - knife
Knife from private collection - Like new, never used, with original box, manuals and warranty certificates in excellent condition - Made in 1997 - "First Production Run" edition - All in mint condition. Checked and certified by our in-house laboratory.
Intended Use: Collector/Sportsman
Type of production: Industrial
Country of Production: USA
Blade: 440 stainless steel at 60HRC
Blade finish: microbead blasting
Handle: Nylon and Glass Fiber
Blade Length: 77mm.
Blade thickness: 2.5mm.
Total length: 195mm.
Weight: 81g.
Closure: Strut'N'Cut (modified back lock) or Slipjoint
Clip: removable and reversible, made of Nylon and Glass Fiber
Packaging: cardboard box with Meyerco logos
Notes: Like-new knife from private collection, dating from 1997 "First Production Run" edition, winner of Most Innovative American Knife of the Year at the Blade Show in AltlantaTrivia:
In 1996 Blackie Collins was inducted into the Cutlery Hall of Fame. - The Strut'N'Cut knife is inspired by the soft suspension of Blackie Collins' Ducati motorcycle - In 1996 he partnered with Bill Meyer to create the Meyerco knife company. The two were immediate pioneers in the knife world, being the first company to launch an assisted-opening knife. Today Meyerco is credited with the invention of the spring-loaded knife. - Blackie Collins holds over 60 patents for knife mechanisms and many design patents for cutlery products. He was a cutlery legend and will be greatly missed.MCSTRH -
Cold Steel - Gunsite II - VG-1 Half Serrated - Made in Japan - PRIVATE COLLECTION - 29GLTH - knife
Knife from private collection - Like new, never used, with original box in excellent condition - Mid 90's production still made in Japan, with VG-1 steel - All in mint condition. Checked and certified by our in-house laboratory.
Intended Use: Collector/SportsmanType of production: Industrial
Country of Production: Japan
Blade: Stainless steel VG-1
Blade Finish: Satin
Handle: Zytel
Blade length: 104mm.
Blade thickness: 3mm.
Total length: 233mm.
Weight: 105g.
Closure: Back-Lock
Clip: Removable, painted stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: Like-new knife from a private collection, dating from the mid-1990s; made in Japan from VG-1 steelC29GLTH -
Wander Tactical - Prototype - PRIVATE COLLECTION - SanMai V-Toku2 & Desert Paracord - custom knife
Absolutely like new - Comes from a private collection - Unique item made in 2020, prototype, does not correspond to any standard model of Wander Tactical production - Made entirely by hand.
Use: Collection / Utility / Hunting
Production type: Handcrafted
Country of Production: Italy
Blade: integral, japanese rolled steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
Blade finish: satin finish
Handle: Paracord
Blade length: 90mm.
Blade thickness: 6.65mm.
Total length: 200mm.
Balance: backward
Weight: 180g.
Sheath: in kydex
Package: Certificate of authenticity
Notes: Unique piece of 2020 - Prototype: it doesn't correspond to any standard model of Wander Tactical production - Entirely hand made - Absolutely like new, coming from a private collection,Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Coltelleria Collini, we decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically we have used the carbonaceous V-Toku2 at 62/63HRC for the central plate and the stainless SUS410 for the two external plates, in order to guarantee a very high cutting capacity, penetration and edge holding together with an easy resharpening and maintenance. At the same time the blade has a remarkable resistance to corrosion and an important increase of resilience given by the type of extreme steel and the laminated structure.
As in the ancient swords of the Japanese Samurai.
The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: It is made of different types of metals alloyed together to create a composite that contains and intensifies the strengths of the metals taken individually:
- Longer cutting edge life
thanks to the use of high quality steels with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performance decidedly superior to those achieved with the use of traditional steels.- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.- Improved aesthetic performance
Knives made of multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For further information: collinisteel
WT-PRO-VT -
ExtremaRatio - Harpoon Miles knife - PRIVATE COLLECTION - knife
Rare original model Extrema Ratio Harpoon Miles no longer in production since 2009 - Knife in excellent condition with original box and double handle. Checked, sharpened and certified by our internal laboratory - Collini Cutlery.
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: Italy
Blade: N690Co stainless steel
Blade treatment: Miles
Handle: double Forprene handle
Blade length: 200mm.
Blade thickness: 6.3mm.
Total length: 340mm.
Weight: 314g.
Sheath: ballistic rubber
Packaging: Cardboard box with Extrema Ratio logos
Note: -ER-HAR-M-AP -
Klotzli - Sailor C Knife Walker design - Titanium - ATS-34 - collection knife
Knife withdrawn from a private collection, in like new condition with original box and certificate - Model dating back to the late 90s "made by Klotzli from the famous American designer Michael Walker. Knife that combines two qualities that are difficult to match, especially in those years; lightness and strength. Elegant gentleness, easy to open and close with one hand thanks to the Liner-Lock system invented by Walker himself
Checked and certified by our internal laboratory Coltelleria Collini.
Intended use: sports / collection
Type of production: industrial
Country of production: Switzerland
Blade: ATS-34 stainless steel
Blade finish: Satin finish
Handle: Titanium
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 170mm.
Weight: 74g.
Closure: LinerLock
Clip: in stainless steel, removable
Notes: Design by Michael WalkerAP-KLO-S-W -
Cold Steel - Recon Tanto Carbon V - Made in USA - PRIVATE COLLECTION - 13RT - knife
Knife from a private collection - The original Recon Tanto "Made in USA" of the '90s, progenitor of the current generation - Absolutely like new, never taken out of the box, still with the original factory grease on the blade, sheath without signs of use and knife insertion - Complete, with original box and Cold Steel warranty - Checked and certified by our internal laboratory.
Intended use: collection / tactical / sportingProduction type: Industrial
Country of Production: USA
Blade: Carbon V steel
Blade treatment: varnishing
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balancing: advanced
Weight: 265g.
Scabbard: Simil-leather
Package: Cardboard box with Cold Steel and "Made in USA" logos
Notes: Knife from a private collection - Made in the late 90's (presumably 1997/1998) - Absolutely like new13RTCP -
Spyderco - Viele - C42S - 1997 Made in Japan from PRIVATE COLLECTION - knife
Knife taken from private collection - Rare Spyderco model produced in December 1997 - Absolutely like new, with original box, never taken out of the box and never used - Checked and certified by our internal laboratory.
Intended Use: Collection/SportingProduction Type: Industrial
Country of Production: Japan
Blade: AUS-8 Stainless Steel
Handle: Micarta and Steel
Blade Length: 82mm.
Blade Thickness: 3mm.
Length closed: 114mm.
Total length: 196m.
Weight: 98g.
Closure: Liner Lock
Clip: Stainless steel
Package: original box with Spydero logos
Notes: knife made in 12/97, new, never used, with original box.SP-C42S-97 -
Gerber - BMF - Basic Multi Function - survival knife - vintage - PRIVATE COLLECTION - tactical knife
Famous Gerber knife dating back to the 80s and discontinued in 1999 - Knife withdrawn from a private collection in like new condition - without cardboard box. Checked, sharpened and certified by our in-house Coltelleria Collini laboratory
Intended use: Military
Type of production: industrial
Blade: AUS-8 stainless steel
Blade treatment: Hypalon
Production Lama: USA
Handle: Hypalon
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 372mm.
Balancing: on the guard
Weight: 465g.
Notes: serial number 045552
Sheath: in ABS and corduraGE-BMF-CP -
Strider Knives - AR Tiger Stripe - Flat G10 Scales S30V by Paul Bos - PRIVATE COLLECTION - knife
Knife acquired from a private collection - Overall in very good condition, with factory sharpening - Rare version, one of the first, with flat G10 handle - Hardened by Paul Bos, with logo present on the right heel of the blade - It has some small signs of abrasion on the tigerstripe finish, common to all Strider knives - Checked and certified by our internal laboratory.
Intended Use: TacticalManufacturing Type: Mid Tech (semi-craft)
Country of Production: USA
Blade: Stainless steel CPM-S30V hardened by Paul Bos
Blade Treatment: Tiger Stripe
Handle: G10 flat with 2mm titanium liners
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thickness closed: 18mm.
Weight: 228g.
Closure: Liner Lock
Clip: Titanium
Package: Nylon pouch with zipper
Notes: Rare version, one of the first, with G10 flat grip - Hardened by Paul Bos, with logo on the right heel of the bladeST-AR-CPR -
Buck - Simonich Raven Legacy Knife 0895BKS - 2008 - PRIVATE COLLECTION - knife
Knife withdrawn from a private collection. Produced in 2008, it was born from the collaboration between Buck and Simonich Knives. The result is a sturdy, yet handy full tang tactical knife.
Overall in excellent condition - Checked and certified by our in-house Coltelleria Collini laboratory, it comes complete with original box.Intended use: Sports / Collection
Type of production: Industrial
Production Lama: USA
Blade: Bos-hardened CPM S30V stainless steel
Handle: G10
Blade length: 125mm.
Blade thickness: 4mm.
Total length: 255mm.
Balancing: set back from the guard branch at about 40mm.
Weight: 230g. (317g. Including scabbard)
Sheath: in black Nylon
Packaging: Official cardboard box with Buck logos0895BKS-B-CP -
Master of Defense - LTT 875 Tanto knife - PRIVATE COLLECTION - folding knife
Knife withdrawn from a private collection - Rare model produced by the Master of Defense around 2005 - Excellent condition. Never resharpened - Without original box - Checked and certified by our internal laboratory Coltelleria Collini.
Master of Defense, an eclectic American brand no longer in business and later taken over by Blackhawk! Blades, produced various tactical and military type folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.
The only copy at our disposal, without box, rare and out of production for many years.
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel - DLC
Handle: polymer with aeronautical aluminum inserts with Kraton anti-slip
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed length: 130mm
Total length: 223mm.
Thick when closed: 20mm
Weight: 170g.
Closure: Button Lock
Clip: removable, in stainless steel
Packaging:MOD-LTT 875-CP -
Master of Defense - Tempest knife SW by Michael Janich Design - PRIVATE COLLECTION - folding knife
Knife withdrawn from a private collection - Rare model produced by the Master of Defense around 2001 - Excellent condition. Never resharpened - Without original box - Checked and certified by our internal laboratory Coltelleria Collini.
Tactical / EDC knife manufactured in the late 1990s and designed by martial arts expert Michael Janich,
Master of Defense, an eclectic American brand no longer in business and later taken over by Blackhawk! Blades, produced various tactical and military type folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.
The only copy at our disposal, without box, very rare and out of production for many years.
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel
Handle: Aviation aluminum with Kraton anti-slip inserts
Blade length: 86mm.
Blade thickness: 3.5mm.
Closed length: 112mm
Total length: 200mm.
Thick when closed: 13mm
Weight: 120g.
Closure: Liner Lock
Clip: removable, in stainless steel
Packaging:MOD-TEMSW-CP -
Allen Elishewitz - Gordian Knot Custom Flipper - Bronze and Carbon Fiber - PRIVATE COLLECTION - handmade knife
Knife collected from private collection - 2014 model entirely handmade by Allen Elishewitz - Like new, original sharpening - Supplied with nylon pouch with velcro - Checked and certified by our internal laboratory Coltelleria Collini.
Intended use: CollectionKind of production: Handmade
Country of production: USA
Blade: handcrafted and beveled, in CTS-C75P stainless steel (Latrobe BG-42)
Blade treatment: handmade satin finish with Allen Elishewitz golden punch
Handle: titanium liners "crushed ice" with carbon fiber and copper grips with handmade bronze bolsters
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total lenght: 223mm.
Thickness when closed: 16mm.
Weight: 199g.
Closure: Liner Lock
Clip: Removable, inegral carbon fiber
Notes: Entirely handcrafted by Allen Elishewitz - 2014 model, like new - from private collector - Supplied with nylon velcro pouch.AE-GKCF -
Sergio Consoli - Folder Damascus Spirograph - Timascus and bronze Handle - N ° 454 - handcrafted knives
Intended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018Acknowledgments
Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize for best folding
but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.
Presentation of the craftsman
Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.
With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.
I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".
Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...
SC-454€0.00Only -50 leftOut of stock -
Al-Mar - Hunting knife - PRIVATE COLLECTION - knife
Rare knife produced by the Japanese Al-Mar around the 90s. Knife withdrawn from a private collection in like new condition - New knife with sheath and original box - Checked and certified by our in-house Coltelleria Collini laboratory.
Intended use: sports / collection
Type of production: industrial
Blade: AUS 8 stainless steel
Blade treatment: -
Lama production: Japan
Handle: micarta
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 195mm.
Weight: 117g.
Closing: -
Clip: -
Sheath: in leather
Notes: with original boxam-cp1 -
Chris Reeve - Large Sebenza 21 knife - 2010 - PRIVATE COLLECTION - knife
* Type: Previously purchased and used
* Condition: In like new condition - manufactured in 2010
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: No
* Marks on handle: No
* Packaging: Yes
* Sheath: /
* Manuals, Certificates and Warranties: Yes
* Checked and Certified by our internal laboratoryIntended use: collection/sports
Production type: Mid-Tech
Country of production: USA
Blade: CPM-S30VN 58/59HRC stainless steel
Handle: Micro-shot peened titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Closed thickness: 17mm.
Weight: 134g.
Closure: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificatesCR-LS21-CP -
Allen Elishewitz - Custom Titanium Frame Lock - PRIVATE COLLECTION - handmade knife
Collector's knife from private collection - Handcrafted in 2001 by Allen Elishewitz - Overall in good condition, original sharpening, some small signs of wear on the titanium handle and on the back of the blade - Without certificates and packaging - Checked and certified by our Collini Cutlery internal laboratory.
Intended use: Collection
Type of production: custom
Country of production: USA
Blade: handcrafted and bevelled, in CPM-154CM stainless steel
Blade treatment: hand satin finish
Handle: full scales in titanium with blue anodizing
Blade length: 82mm.
Blade thickness: 3.5mm.
Length closed: 130mm.
Total length: 184mm.
Thick when closed: 11mm.
Weight: 96g.
Closing: framelock
Clip: removable, stainless steel
Notes: Made entirely by hand by Allen ElishewitzAE-CU-CP -
Buck - Kalinga knife 1991 - 401 - Wood - PRIVATE COLLECTION - knife
Knife withdrawn from a private collection in like new condition - Thanks to the engraving next to the BUCK logo (X series) it is possible to go back to the 1991 year of production of the knife - Complete with box and scabbard - Checked, certified by our internal laboratory. Cutlery Collini
The Kalinga, model first produced by Buck in 1969, was a favorite of Al Buck. With a large skinner blade and an ergonomic design, the Kalinga remains in addition to an important piece to collect, also an excellent choice for hunting use.
Intended use: Sports / Collection
Type of production: Industrial
Blade production: USA
Blade: full tang, 420HC stainless steel
Blade treatment: -
Handle: Wood
Blade length: 115mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 255mm.
Thick when closed: -
Balancing: -
Weight: 322g.
Closing: -
Clip: -
Sheath: brown leather
Packaging: Cardboard box with Buck logos, with certificates
Note:BU-401-CP -
Max Salice Sanna - Daghetta in Damasteel damask and carbon fiber - PRIVATE COLLECTION - custom
Collector's knife from a private collection - Daghetta model made by the famous Italian knifemaker Max around the early 2000s - Like new condition - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Collection / Gentleman
Type of production: Artisan
Lama production: Italy
Blade: Damasteel 61/62 Hrc damascus steel
Blade treatment: -
Handle: damasteel damask bolster, carbon fiber with titanium liners
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 129g.
Closing: Liner Lock
Clip: in damasteel damask
Sheath: -
Notes: ONE PIECE - custom knife handcrafted by MaxMassimiliano Salice Sanna, called Max is a master knife maker "of the first hour", active for a quarter of a century. Specialized in the construction of folding knives, he is constantly looking for new materials and innovative techniques. Max is a master of the Italian guild of knife makers, born in 1958, a Roman by birth and a Tuscan by adoption.
MAX-DAG-CP -
Sergio Consoli - Custom Liner Lock folder - N ° 271 - PRIVATE COLLECTION - handmade knife
Intended use: Collection
Type of production: Artisan by Maestro CIC Sergio Consoli
Lama production: Italy
Blade: full-tang in RWL-34 60 / 61HRC stainless steel
Blade treatment: -
Handle: carbon fiber
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 138g.
Closing: Liner Lock
Clip: carbon fiber
Sheath: -
Packaging:
Notes: Handmade by Maestro Sergio Consoli - knife number 271 made in 2009Acknowledgments
I currently make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded the "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
moreover, I ranked second in the competition organized by LAME D'AUTORE magazine as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize as the best closable
but above all again in 2007, I achieved, to my great satisfaction, the level of MASTER OF ITALIAN COLTELLINAI CORPORATION, recognition received at the first exam taken.
Presentation of the craftsman
Creating a hand knife is what I consider a real art form.
The satisfaction of seeing an object that comes from your own hands, that takes shape and that reaches mechanical, artistic and aesthetic perfection is what pays me more for all the hours of work and effort it takes to create a knife completely by hand.
The passion for "cutting irons" has always been in me since I was a child and has grown with me until the almost sudden decision to build my first knife on my own, it was a "need", almost an inner need that I couldn't put it off, my hands and my mind had to start creating, of course what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no manual work experience, but I had been a mechanical designer for many years and this allowed me to know perfectly the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Maestro, which is the highest, of the Italian Knifemakers Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handmade, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I make above all folding knives, which satisfy more my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they cannot be seen, is what distinguishes a hand-made knife from an industrially made one .
The mechanics must then be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved even more the mechanics by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction and with an incredible sweetness.
With regard to the blades, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow exceptional wire holding and cutting quality for all types of use.
Pathically I make all the knives on my initial design, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "handmade".
Regarding the materials that I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damask, both stainless steel and carbon, for the uniqueness 'that they donate to the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of colors, all beautiful, I also use the fossil ivory of mammoth, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and rigorously by hand, to transform the knife even more into a real work of art ...CON-271 -
Spyderco - DAllara Rescue knife C82SBK - PRIVATE COLLECTION - collection knife
Knife withdrawn from a private collection - Rare model produced by Spyderco to commemorate New York police officer John D'allara who died when he entered the World Trade Center on September 11, 2001 - no longer in production since 2005 - Like new condition - With original box - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Sports
Type of production: Industrial
Blade production: Japan
Blade: VG10 Stainless Steel
Handle: FRN with drowned stainless steel folders
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 203mm.
Weight: 164g.
Closing: Spyderco’s Ball Bearing Lock
Clip: stainless steel
Packaging: with box
Notes: -C82SBK -
Frank Centofante - Mother of Pearl Lockback Gentleman knife - PRIVATE COLLECTION - handmade knife
Knife withdrawn from a private collection - Beautiful and rare knife made in the late 90s by the famous American Knifemaker Frank Centofante, who passed away in 2009 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Collection / Gentleman
Type of production: Artisan
Blade production: USA
Blade: ATS34 stainless steel
Blade treatment: -
Handle: steel and mother of pearl
Blade length: 75mm
Blade thickness: 2.5mm.
Length closed: 103mm.
Total length: 180mm.
Thick when closed: 10mm.
Balancing: -
Weight: 86g.
Closing: Back Lock
Clip: -
Sheath: -
Packaging: -
Notes: rare artisan knife made by the well-known American cutler Frank Centofante who recently passed away, serial number 008CE-008 -
Brian Tighe - Pan knife - PRIVATE COLLECTION - custom knife
Knife withdrawn from a private collection - Rare model made by the famous knifemaker Brian Tighe in 2005 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: collection
Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin
Handle: titanium and carbon fiber
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 198mm.
Thick when closed: 14mm
Balancing: -
Weight: 103g.
Closure: Liner Lock
Clip: titanium
Sheath: -
Note: -BT-PIN-U -
Brian Tighe - Die Dagger knife - PRIVATE COLLECTION - custom knife
Knife withdrawn from a private collection - Rare model made by the famous knifemaker Brian Tighe in 2005 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: collection
Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin
Handle: titanium
Blade length: 953mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Thick when closed: 10mm
Balancing: -
Weight: 108g.
Closure: Frame Lock
Clip: titanium
Sheath: -
Note: -BT-DIE-T-U -
Bob Dozier - Dagger Liner Lock Folder D2 Steel - Titanium - custom knife
Rare knife handcrafted by Bob Dozier in 2001, made of D2 steel with sandblasted titanium handle and anodized details.
Intended use: Collection
Type of production: handmade
Country of production: USA
Blade: in D2 steel at 61HRC
Blade treatment: satin finish
Handle: in titanium with anodized details
Blade length: 105mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 250mm.
Weight: 170g.
Closure: Liner Lock
Clip: titanium, removable
Notes: made entirely by hand by Bob Dozier in 2001Dozier-SP€0.00Only -20 leftOut of stock -
Kevin Wilkins - 2005 New Brittania Linerlock - Jade G11 - Custom knife
Custom by Kevin Wilkins from 2005 from a private collection provided with original certificates signed by the craftsman.
Slight regrinding, perfectly centered blade with good retention from closed, fluid opening movement and blade without any horizontal or vertical clearance once opened. The frame lock engages in the first quarter of the race without any uncertainty and without sticking.
Globally in good condition, it shows some small marks on the G11 handles and on the back and belly of the liners. A small abrasion on the blade, on the right side near the tip of the knife.
Intended use: collection
Type of production: artisanal
Country of production: Germany
Blade: CPM-S90V stainless steel
Finish: Satin
Handle: jade Titanium and G11
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 110mm.
Total length: 188mm.
Thick when closed: 15.8mm
Weight: 158g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: with original warranty certificates - produced in March 2005 - from a private collectionKW-BRITTANIA -
ExtremaRatio - Police I knife - Multi-purpose 2 blades - knife
Intended use: Emergency and survival multi-purpose knife
Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Finish: Testudo burnishing
Handle: anticorodal anodized aluminum
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 210mm.
Weight: 152g.
Sheath: -
Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificates
Notes: emergency blade with snap opening (length 8 cm) - window breaker - 2013 model now out of productionER-POLICE -
Brian Tighe - Tac Tanto knife - craft knife
Intended use: collection
Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin finish
Handle: titanium and carbon fiber
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm
Balancing: -
Weight: 94g.
Closure: Liner Lock
Clip: in titanium
Sheath: -
Notes: production early 2000s, withdrawn from a private collectionBT-CUSTOM -
Le Berger - Vendetta Corsa in sheepskin with blade lock - knife collection
Traditional knife Course handcrafted by the historic French company Le Berger
Intended use: Hunting / Sports
Type of production: Industrial
Country of production: France
Blade: Sandvik 12C27 stainless steel
Blade treatment: -
Handle: sheepskin
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 205mm.
Balancing: -
Weight: 120g.
Sheath: in leather
Packaging: -
Note: -corso€131.15Out of stock -
Pattada custom knife by Giuseppe Muzzu of Telti - 16 cm blade - custom knife
Intended use: Regional
Type of production: Artisan
Lama production: Italy
Blade: carbon steel 1060
Blade treatment: -
Handle: buffalo horn with brass ring
Blade length: 160mm.
Blade thickness: 4mm.
Length closed: 200mm.
Total length: 355mm.
Thickness when closed: -
Balancing: -
Weight: 238g.
Closure: -
Clip: -
Sheath: -
Package: -
Notes: single piecePATT-GM€385.25Out of stock -
Paolo Gidoni "Gidowolf" - Integral Knife with handle in giraffe bone - artisan knife
Intended use: Collection
Type of production: one piece entirely handmade - number 82
Lama production: Italy
Blade: 440C stainless steel
Blade Treatment: Mirror Polishing
Handle: in giraffe bone
Blade length: 168mm.
Blade thickness: 6mm.
Length closed: -
Total length: 310mm.
Thickness when closed: -
Balancing: -
Weight: 386g.
Closure: -
Clip: -
Sheath: leather, handcrafted, hand-sewn
Package: -
Notes: Made entirely by handgidoni82€1,598.36Out of stock -
Koji Hara - Bamboo Motif - Dagger Gentleman in Mother of Pearl - artisan knife
Intended use: Collection / Gentleman
Type of production: Artisan
Lama production: Japan
Blade: Cowry-Y stainless steel
Blade treatment: -
Handle: Mother of Pearl
Blade length: 87mm.
Blade thickness: 2.5mm.
Length closed: -
Total length: 195mm.
Thick when closed: 11mm.
Balancing: -
Weight: 82g.
Closure: Liner Lock
Clip: -
Sheath: -
Package: -
Notes: model entirely handmade by Master Koji Harakoji-hara€729.51Out of stock -
Spyderco - Native 5 - Maxamet Sprint Run - C41PGY5 - knife
Intended Use: Sport / Collection
Type of production: Industrial
Country of production: USA
Blade: CTS Maxamet Tool Steel 67/68HRC
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Thick when closed: 14mm.
Weight: 70g.
Locking System: Back Lock
Clips: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: limited edition sprint runC41PGY5 -
Chris Reeve - Mk IV 28 Year Commemorative knife
Chris Reeve - Mk IV 28 Year Commemorative knife
For 28 years, (the A2 round handled) One Piece Range of knives has been an essential part of Chris Reeve Knives. From Chris first designing the concept while serving in the South African Army in Namibia to today, these knives have been used, carried, admired and collected in all corners of the world.
An integral part of the success of this range has been Eddie Myers. Eddie was Chris's foreman when Chris was an apprentice tool and die maker. They have known each other more years than they care to count and Chris has always regarded Eddie as mentor, teacher, friend and consultant! For 25 years, Eddie has machined the blanks for our One Piece Knives. Still living in South Africa, Eddie and his wife Caroline, have provided fine service to deliver the best blanks at the best price. (There is no question that the volatility of the South African currency has helped over the years!)
Eddie and Caroline want to retire. Ed wants to buy a boat again and go fishing whenever he feels like it! This brought us to a cross-roads--do we try to source a vendor in the USA or should we simply retire a - Classic. We have decided to take the second choice--to discontinue the One Piece Range.
To celebrate the end of this era, Chris Reeve Knives offered a limited edition of 250 Commemorative Mk IVs. The Mk IV was the first iteration of the one piece concept to become known there is still call for this model which we initially discontinued in 1995. It has a 7 inch blade with a clip point and sawback. For this commemorative edition, the butt cap is engraved and polished and the sheath has a commemorative logo embossed.
Specifications
Blade Material: A2 tool steel
Blade Hardness: 55-57 RC
Blade Coating: KG Gun-Kote
Blade Length: 7" sawback blade
Blade Thickness: 0.187"
Overall Length: 12"
Handle Material: A2 Tool Steel
But Cap Material: D65S aluminum
Sheath: Leather with horizontal carry belt loop, Snap
Weight: 12.90 oz. (365 grams)
Limited Edition, only 250 pieces produced!
Handmade in the USA
One Piece Knife ConceptThe idea of the one piece knife was born while Chris was serving time in the South African Army on the Namibia/Angola border in 1979. The experiences of military service have contributed substantially to the features in these knives.
Chris realized that the ideal working knife was a tool which was strong, reliable and impervious to temperature and humidity. Extensive time has been devoted to design, and research and development to improve both the blade designs and the methods used in making the knives.
Each knife is made from a solid billet of A2 tool steel. The stock removal method results in two distinct advantages--the strength/weight ratio is exceptional and there is no handle/blade join. This means that there is no area where the blade and handle could come apart--a weakness in the design of other hollow handle knives. The handle cavity is larger than that of any similar knife. The hollow handle is closed with a butt cap made of 6061 aluminum which screws into the handle against a Neoprene "O" ring, ensuring the cavity is sealed from dust and moisture. All the one piece knives are hardened to 55-57 RC and random checks are made to ensure accuracy. This hardness gives superb toughness, good edge retention and allows for efficient sharpening in the field. Each knife is coated with super hi-tech KG Gun-Koteä originally developed for use in the aerospace industry. This coating offers a durable, long-lasting, non-reflective covering. Included in the price of each knife is a hand-made leather sheath. A lifelong guarantee, signed by Chris accompanies each knife.
The one piece design offers the highest possible weight/strength ratio
A2 Tool Steel offers excellent edge retention and good shock resistance
Hardness at between 55 and 57 Rockwell C is not brittle but gives good edge retention along with ease of sharpening
An 8" hollow grind is used with a full thickness back edge. All designs are ground to allow the full thickness of the back edge to come as close to the point as possible, affording a very strong front tip but not restricting the knife's ability to pierce
The hollow handle, which is created to reduce weight, is larger than any similar sized knife because there is no join between handle and blade
The aluminum butt cap provides an airtight closure for the hollow handle and is designed so that it can be used for hammering. Because using the knife as a hammer can be dangerous to one's knuckles and fingers, we do not recommend that this be done unless in an emergency situation. It is preferable to use a hammer
Full depth precision machined knurling affords maximum non-slip grip
Non-reflective KG Gun-Koteä coating gives lasting protection
All knives carry a lifetime guarantee and a damaged knife will be replaced or repaired at Chris' discretion. This guarantee does not cover damage to a knife that has been thrown or used for heavy levering
These knives are used by hunters, backpackers, SWAT teams, military personnel, firefighters and police all over the world. They are also to be found in many knife collections and most of our customers own more than one of our knives
Each hand made leather sheath is designed to fit the knife well, to give maximum protection to the carrier and the knife when being carried. Because we continue to improve our design, sheaths supplied might not be exactly as shown in the brochure
Replacement butt caps and sheaths are available at reasonable prices
Many customers feel that once their knives have been used, they lose collector's value. This is not so as the knife can be returned to Chris Reeve Knives, where it will be sandblasted, re-coated with KG Gun-Kotea, sharpened and returned to it's original condition. Contact Chris Reeve Knives for cost. Please return knife in sheathCR-MkIV -
Lionsteel - KUR - Metamorphosis - KUR MT - Knife
Winner in 2016 at the Blade Show in Atlanta as "Overall Knife of the Year"
Metamorphosis handle: it is an aluminum handle with a special heat-sensitive coating. Normally the handle is black, but when the temperature reaches 22-23 ° C, it changes color! If you hold the knife in your hand for a couple of minutes, the black handle will become Camouflage.
Given the production difficulty of the handle and the extreme delicacy of the same, the production of this variant ceased definitively in 2017. The first production was characterized by the presence of the clip, the second production proposed a knife without a clip, but accompanied by a sheath a leather.
Intended use: Sports / EDC
Type of production: Industrial
Lama production: Italy
Blade: Sleipner 60 / 61HRC steel
Blade treatment: Stonewashed
Handle: Aluminum with titanium spacers
Blade length: 87mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Weight: 175g.
Closure: Liner Lock
Sheath: in leather, with automatic button and belt loop for vertical port
Packaging: Cardboard box with Lion Steel logos
Notes: Design by Molletta - Carson Flipper opening system - Opening on IKBS ball bearingsVALUTAZIONE DEL PRODOTTO
Stato di Conservazione / Grade of preservation: A+
Scatola e certificati / Box and papers: Y
Reperibilità / Availability: B
Valore storico / Historical value: A
Valore collezionistico / Collectible value: BCLICCA QUI per leggere e conoscere i nostri criteri di valutazione
LS-KURMT -
G. Sakai - HSEK Bowie Micarta - HN-501 - Vintage Knife
Intended use: hunting / sport
Type of production Semi-Industrial
Blade: SRS-15 semi-carbon steel 63 / 64HRC
Country of production: Seki City - Japan
Handle: micarta brown with loop guard and brass rivets
Blade length: 237mm.
Blade thickness: 6mm.
Overall length: 378mm.
Weight: 464g.
Sheath: Brown leather
Packaging: cardboard box with G. Sakai logos
Notes: Knife of the late '90s, brand new, mint conditions12573 -
Dietmar Kressler - Integral Utility blond horn - handmade knife
Intended Use: Collection
Type of production: made entirely by hand
Production Country: Germany
Blade: integral, stainless steel RWL-34 to 62 / 64HRC
Blade treatment: -
Handle: Full, in RWL-34 stainless steel inserts with blond horn
Blade length: 70mm.
Blade thickness: 3mm.
Handle thickness: 7.5mm.
Overall length: 165mm.
Weight: 76g.
Sheath: leather, hand-stitched
Notes: Made entirely by hand by Dietmar F. Kressler12551€0.00Only -50 leftOut of stock -
Bob Dozier - DH-FH - Black and Burgundy Micarta - handmade knife
Intended use: Sports / Collection
Type of production: handmade
Country of Origin: USA
Blade: D2 steel 61HRC
Blade treatment: satin finish
Handle: Micarta black and burgundy, folders and spacers Titanium
Blade length: 102mm.
Blade Thickness: 3.5mm.
Closed Length: 133mm.
Overall length: 234mm.
Weight: 212g.
Lock: Liner Lock
Clip: -
Notes: made entirely by hand by Bob Dozier in 201312521€696.72Out of stock -
Allen Elishewitz - Suppressor - Wilson Tactical 2012 Custom Alliance - handmade knife
Handmade knife made in 2012 by Allen Elishewitz specifically for the collection "Wilson Tactical Custom Alliance". They were made only 10 copies, all numbered on the blade.
Intended Use: Collection
Type of production: made entirely by hand
Country of Origin: USA
Blade: made and bevelled by hand, in the CTS-XHP stainless steel 60HRC
Blade treatment: satin hand
Handle: full scales brushed titanium with grips briar stabilized Ironwood and custom screws
Blade length: 100mm.
Blade thickness: 3.5mm.
Closed Length: 130mm.
Overall length: 225mm.
closed Thickness: 13mm.
Weight: 172g.
Closing: framelock
Clip: titanium bead blasted
Notes: Entirely handmade by Allen Elishewitz - Exemplary serialized, number # 9 of 10 products12487€778.69Out of stock -
Hinderer Knives - XM-24 - Custom Grind Slicer - Carbon Fiber with Anodized Titanium - custom knife
Intended use: Tactical / Collection
Type of production: custom
Country of Origin: USA
Blade: handcrafted by Rick Hinderer, CPM-S35VN 61 / 62HRC stainless steel, with double concave beveling
Blade treatment: Hand satin
Handle: grip plate in the liner thickness of titanium 1mm 6AL4V 3.5mm carbon fiber with blue anodizing. Frame titanium blue anodized 6AL4V, billet, thick 4.5mm with Hinderer Lockbar Stabilizer. Spacers and screws 17-4 PH stainless steel
Blade length: 100mm.
Blade thickness: 4.5mm.
Closed Length: 135mm.
Overall length: 233mm.
Thick when closed: 15mm.
Weight: 210g.
Lock: Frame Lock type
Clip: blue anodized titanium
Notes: Lanyard black paracord with titanium wire stop 6AL4V blue anodized, billet, with a diameter of 9mm, custom by Rick Hinderer12479 -
Hinderer Knives - XM-18 - Spanto 3.5" Gen IV - Carbon Fiber with Flaming Horse Clip - custom knife
Intended use: Tactical / Collection
Type of production: custom
Country of Origin: USA
Blade: CPM-S35VN Stainless Steel 61 / 62HRC
Blade treatment: Stonewashed
Handle: grip plate in 3mm carbon fiber liner of titanium 6AL4V 1mm thick. Frame titanium 6AL4V, billet, 4mm thick with Hinderer Lockbar Stabilizer. Spacers and screws 17-4 PH stainless steel
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 120mm.
Overall length: 270mm.
Thick when closed: 13mm.
Weight: 175g.
Lock: Frame Lock type
Clip: 17-4 PH stainless steel, custom by Rick Hinderer, with Flaming Horse Design
Notes: Lanyard black paracord with wire stop in 6AL4V titanium billet, with a diameter of 9mm, custom by Rick Hinderer12478 -
Brad Zinker - TLLF Mammoth Fossil Ivory - custom knife
Intended Use: Collection
Type of production: handmade
Country of Origin: USA
Blade: handmade by Rob Thomas, In Damascus steel 440C and CPM154 with Basketweave pattern
Blade treatment: -
Handle: fossil mammoth ivory with liners of titanium and damascus spacer
Blade length: 91mm.
Blade thickness: 2.5mm.
Closed Length: 115mm.
Overall length: 205mm.
Thick when closed: 11mm.
Weight: 56g.
Lock: liner lock
Clip: Titanium
Notes: Entirely handmade by Brad Zinker12475€573.77Out of stock -
Master of Defense - CQD Mark II by Duane Dieter - knife
Master of Defense - CQD Mark II by Duane Dieter - knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: 154CM stainless steel with titanium nitride
Handle: aeronautical aluminum with non-slip inserts and skull-crasher
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length: -
Overall length: 200mm.
Thick when closed: -
Weight: 122g.
Closure: Button Lock with secure additional system
Clip: removable and reversible, stainless steel
Packaging: cardboard box with logos M.O.D. Master of Defense and warranty certificates - Nylon sheath with MOLLE attacksMARKII -
Max Salice Sanna - Wave - Steel SPG2 sanmai - craft knife
Craft knife produced by the famous Master cutler Italian Salice Max Sanna.
This model called Wave, uses the Japanese steel sintered SPG2 damask laminated to 69 layers.
Intended Use: Collection / Gentleman
Type of production: Artisan
Production Lama: Italy
Blade: Stainless sintered SPG2 in DAMACO rolled 61/62 HRC
Blade treatment: -
Handle: Canvas Micarta
Blade length: 73mm.
Blade thickness: 3mm.
Closed Length: 90mm.
Overall length: 170mm.
Thick when closed: 15mm.
Balancing: -
Weight: 92g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Notes: ONE PIECE - knife custom crafted by MaxFor more information you can view the site sull'accaio used: www.collinisteel.com
max-wave€0.00Only -50 leftOut of stock -
Chris Reeve - Ubejane Skinner - coltello
Raro coltello fuori serie realizzato nel 2009 da Chris Reeve.
Il nome Ubejane significa Rinoceronte nella lingua Zulu in South Africa.
Destinazione d'uso: Collezione/Caccia/Sportivo
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio A2 55/57HRC
Trattamento Lama: black
Manicatura: Brown canvas Micarta
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 230mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 312g.
Chiusura: -
Clip: -
Fodero: Cuoio nero
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: coltello fuori produzione dal 2011CR-SKINNER -
Chris Reeve - Impofu 10" Limited Edition - knife
Collini Cutlery is the official distributor for Italy of tactical knives / collection made in the USA Chris Reeve
Made at the Blade Show in 2014 in a limited edition of only 500 pieces worldwide, the impofu (eland antelope, Lungu in Zulu) is a fixed blade knife largest and most impressive ever produced by Chris Reeve.
Use: Collection / Heavy Utility
Type of production: semi-homemade
Blade: Stainless Steel Tool CPM-3V 58 / 60HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 254mm.
Blade Thickness: 6.8mm.
Length closed: -
Overall length: 413mm.
Balancing: Advanced
Weight: 573g.
Closed: -
Sheath: Black Leather by Gfeller Casemakers
Notes: Production limited to 500 pieces worldwide - Certificate of Authenticity and warranty0038 -
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Intended use: Collection / Sports
Blade: Stainless steel CPM-S35VN 58/59HRC
Handle: Titanium polished with computer graphics
Blade length: 73mm.
Blade Thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Balancing: -
Weight: 80g.
Lock: Frame Lock
Clip: Titanium
Note: Product May 28, 201410203 -
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Intended use: Collection / Sports
Blade: Stainless steel CPM-S35VN 58/59HRC
Handle: Titanium polished with computer graphics
Blade length: 73mm.
Blade Thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Balancing: -
Weight: 80g.
Lock: Frame Lock
Clip: Titanium
Note: Product May 28, 201410980 -
Wolfpack Survival / Maserin - WP4 Rough Wolf - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present, original, but damaged
* Scabbard: Present, original, like new.
* Manuals, Certificates and Warranties: Yes
* Checked and Certified by our in-house laboratory
WP4 Rough Wolf is a knife researched and designed by chief instructor Paolo Bozzo of Wolfpack Survival Training (survival and survival school). This design was developed through years of direct experience in the field and further improves on the STF-3 model previously made in collaboration with Fox FKMD
Intended Use: Survival/Utlity
Production type: Industrial
Country of Production: Italy
Blade: Stainless Steel N690Co
Blade Finish: Black Stonewashed
Handle: Green G10
Blade Length: 190mm.
Blade thickness: 5.8mm.
Total Length: 320mm.
Balance: Advanced to 3cm. from guard branch
Weight: 566g. (772g. with scabbard)
Sheath: by Radar, in Kydex with multi-position Keyblock attachment
Packaging: cardboard box with Wolfpack Survival logos
Notes: designed by Paolo Bozzo
Dear Friend,
I am Paolo Bozzo and many times ml have found myself in unpleasant, pericolase and difficult situations. Designing a knife and testing it just a few afternoons in the woods is quite different than designing one trying to solve all those survival problems I have encountered in the last 25 years, both In ltaly and abroad. Mud, water, dirt, grease, blood, fatigue, night use, weak hand, limited space, trajectories, physical deficits, heat, cold, transportation, speed and much, much more...these are just some of the tests a good design must pass.
Here are some of the reasons for the WF4 Rough Wolf design.
1. Balance: it is fondamenlal that the center of gravity is shifted forward. beyond the heel, such that it decreases, i.e., saves energy when delivering the blow. one must always have the feeling that the knife falls forward.
2. Beating mass: 65% of the weight of the whole knife is between the first and second 3rd of the blade, giving maximum beating capacity in penetrating.
3. Cutting edge: due to the main core in the shape of an esse. the cutting edge is lower than the fingers of the handle, with the result that in the dynamics of the fendenle and biomechanics of the arm, the force expressed is never attenuated; especially never before the impact of the same on the object to be cut.
4. Blade height: compared to other blades, it has a significantly higher ability to dig holes.
s. Handling: excellent the ability to use the Wp4 for both coarse and precision work, this thanks to the ability to put the hand before the guard, giving absolute mastery of the blade despite its size. This is thanks to the large heel where the index finger can be inserted and the convenient thumb rest. It is also possible to do this while wearing tactical gloves.
6. Back: the inclination is reversed for 2 reasons; 1st to give forward beating mass, 2nd not to stress the wrist during use as chopping, a normal knife arrives at an angle on the object, devastating the point of impact being slight in thickness. This can only be avoided by straining the thumb-side wrist to tilt so that the back of the knife falls perpendicular on the object. The wp4 does not have this problem; it does not stress the wrist because the back of the blade already falls perpendicular to the object to be beaten.
7. Bevel: it is very high, has impressive penetration capacity.
8. Milling cutter: 5 millings placed on the blade plane for holding the knife with two hands when handling animal hides or for special uses during bushcrafting.
9. Grip: it is designed to decrease the possibility of losing the blade and avoid opening of the phalanges during pmlong use or in situations of prolonged physical deficit. Improved, anti-slip grip with internally concave Gauntlets to accommodate a Micro SurvivalKit.
As for the scabbard, I believe it is as important as the blade. I proceeded to design it and recommend its qualities; the main feature I wanted to put in designing it was the multi-positioning of the same: in particular, placing it at will on one's body or equipment facilitates the possibility of use.
This quality is particularly appreciated by military personnel, who are known to have special technical and logistical needs. For this purpose we have used in addition to Kydex the Keyblock closure, as well as the many holes along the perimeter; also safe for airdrop it has the possibility of use and positioning by both Right and Left handed operators.
PAUL BOZZOWP4-CP -
Strider Knives - AR Tiger Stripe Coyote Tan - knife
Intended Use: Tactical
Type of production: Semi-Craft
Production Lama USA
Blade: Stainless steel CPM-S30V
Treatment Blade: Tiger Stripe
Handle: with G10 scales with titanium liners 2mm
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thick when closed: 18mm.
Balance: -
Weight: 244g.
Lock: Liner Lock
Clip: Titanium
Sheath: -
Packaging: -
Notes: Hardened by Paul Bos, with logo on the right heel of the blade10916 -
Mercworx - Atropos Folding Knife - Knife
Destinazione d'uso: Sportivo / Collezione
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: in acciaio inox BG42
Manicatura: Titanio e Green Linen Micarta
Lunghezza lama: 100mm.
Spessore lama: 4mm.
Lunghezza chiuso: 140mm.
Lunghezza totale: 240mm.
Spessore da chiuso: -
Peso: 190g.
Chiusura: Liner Lock
Clip: in acciaio inox
Confezione: privo di confezione o certificati, come fornito dalla stessa azienda produttrice10856€400.82Out of stock -
Master of Defense - CQD Mark I knife by Duane Dieter - Limited Edition - knife
Innovative tactical / military knife, designed by Duane Dieter, produced at the end of the 90s and immediately became an icon in the field of cutlery.
Master of Defense, an eclectic American brand no longer in business and subsequently acquired by Blackhawk! Blades produced various tactical and military types of folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.
Single copy 867/2000 at our disposal, new and with original boxes, nowhere to be found and discontinued for many years.
Intended use: Tactical / Collection
Type of production: Industrial
Lama production: USA
Blade: 154CM stainless steel with titanium nitriding
Handle: Aeronautical aluminum with non-slip inserts - belt-cutting and skull-crasher
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 247mm.
Thick when closed: -
Weight: 122g.
Closure: Button Lock with additional safety system
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with M.O.D. Master of Defense and warranty certificates10855 -
Strider Knives - DB - CPM 3V .190 Stock Frag Edition, fodero PUP e guancette nere di ricambio
Destinazione d'uso: Tattico
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: CPM-3V Tool Steel
Trattamento Lama: Nitrurazione al titanio
Manicatura: G-10 con lavorazione 3D in colore Green + una coppia di guancette intercambiabili in G-10 in colore Black
Lunghezza lama: 80mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 184mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 227g.
Chiusura: -
Clip: -
Fodero: in Kydex, dotato di sistema opzionale e multiposizione PUP (Pals Universal Platform)
Confezione: Busta Trasparente
Note: Edizione Esclusiva e Limitata, non presente nei normali listini e cataloghi Strider, con loghi Monkey Edge incisi10835 -
Basko - Tanto Asimmetrico in legno di Noce - Coltello
Destinazione d'uso: Tattico/Sportivo
Tipo di produzione: Semi-Artigianale
Produzione Lama: Russia
Lama: asimmetrica, con affilatura a 20°, in acciaio inox 440C 58/59HRC
Trattamento Lama: Micropallinatura
Manicatura: Acciaio e legno di noce
Lunghezza lama: 200mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 345mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 332g.
Chiusura: -
Clip: -
Fodero: in cuoio nero, cucito a mano, con passante per cintura
Confezione: -
Note: Esemplare numerato e serializzato10824 -
Cesare Tonelli - Engraved Buffalo Bone Integral Drop Point - custom knife
Blade: 59HRC 440C Stainless Steel
Handle: Buffalo Bone and 416 Stainless Steel
Blade Length: 96mm.
Blade Thickness: 5mm.
Overall Length: 209mm.
Weight: 206g.
Lock: -
Clip: -
Sheath: Handmaded, Brown Leather and Ostrich
Notes: Engraved by Luca Bertella and Fully handmaded in Italy by CIC Master Cesare Tonelli10153€490.98Out of stock -
Cesare Tonelli - Stag Horn Integral Clip Point - custom knife
Blade: 58HRC 440C Stainless Steel
Handle: Stag Horn and 416 Stainless Steel
Blade Length: 89mm.
Blade Thickness: 5mm.
Overall Length: 199mm.
Weight: 180g.
Lock: -
Clip: -
Sheath: Handmaded, Brown Leather and Ostrich
Notes: Fully handmaded in Italy by CIC Master Cesare Tonelli10152€400.82Out of stock -
Cesare Tonelli - RWL Steak Knife Loveless Micarta - custom knife
Intended use: Collection / Steak / Sports
Production Type: Handmade
Production Blade: Italy
Blade: Stainless steel RWL34 to 60HRC
Treatment Blade: Mirror Polishing
Handle material: Loveless Canvas Micarta with 416 stainless steel guard and passing
Blade length: 98mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 62g.
Sheath: handmade and hand-sewn, leather with ostrich inserts
Notes: Handmaded by Cesare Tonelli, Maestro Coltellinanio CIC (Italian Knives Corporation)10151€204.10Out of stock -
Cesare Tonelli - RWL Steak Knife Black Micarta - custom knife
Intended use: Collection / Steak / Sports
Production Type: Handmade
Production Blade: Italy
Blade: Stainless steel RWL34 to 60HRC
Treatment Blade: Mirror Polishing
Handle material: Black Canvas Micarta with 416 stainless steel guard and passing
Blade length: 98mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 62g.
Sheath: handmade and hand-sewn, leather with python inserts
Notes: Handmaded by Cesare Tonelli, Maestro Coltellinanio CIC (Italian Knives Corporation)10150€204.10Out of stock -
Strider Knives - AR Tiger Stripe Coyote Tan - knife
Intended Use: Tactical
Type of production: Semi-Craft
Production Lama USA
Blade: Stainless steel CPM-S30V
Treatment Blade: Tiger Stripe
Handle: with G10 scales with titanium liners 2mm
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thick when closed: 18mm.
Balance: -
Weight: 244g.
Lock: Liner Lock
Clip: Titanium
Sheath: -
Packaging: -
Notes: Hardened by Paul Bos, with logo on the right heel of the blade10139 -
Bradburn Custom Cutlery Pointy Kwaiken - custom knife
Knife made entirely by hand by the artisan American Bradburn
Blade: 1084 steel with a high carbon content and selective hardening clay 40/60HRC and high degree of polish .
Bo -Hi : none
Total length: 21.5cm .
Blade length : 9.5cm .
Blade thickness : 5mm .
Handle Length : 9.5cm .
Much Weight : 150g .
Sheath: kydex thermo format
Tsuka -ito : black cotton on same ( ray skin )
Menuki , Seppa , shitodome : bronzeNotes: one piece - certificate of authenticity signed craftsman
Small technical glossary : Hamon : tempering line on the blade * Hi : deep groove in the blade , also called colasangue * Saya : scabbard * Tsuka - Ito or Tsuka -gawa : weaving in cotton, silk or leather that wraps the handle * Tsuba : * guard Fuchi : ornament between guard and manicatura * Kashira : ornament at the end of the handle * Menuki : medallions placed under the cordage of the handle * Habaki : collar that wraps around the beginning of the blade * Seppa : * Shitodome guard seals : seals to which is linked the Sageo * Sori : curvature of the blade67203€307.38Out of stock -
Max Salice Sanna - Goblin - Red Stamina - custom knife
Intended use: Collection / Gentleman
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel ATS34
Treatment Lama: -
Handle: Red Stamina
Blade length: 67mm.
Blade thickness: 3mm.
Closed Length: 90mm.
Total length: 154mm.
Thick when closed: 13mm.
Balance: -
Weight: 55g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Notes: ONE PIECE - handmade custom knife by Maxmax€0.00Only -99 leftOut of stock -
Cesare Tonelli - Clip Point Integral - custom knife
Blade: 58HRC 440C Stainless Steel
Handle: Loveless Micarta
Blade Length: 87mm.
Blade Thickness: 5mm.
Overall Length: 199mm.
Weight: 172g.
Lock: -
Clip: -
Sheath: Handmaded, Brown Leather
Notes: Fully handmaded in Italy by CIC Master Cesare Tonelli10095€368.03Out of stock -
Cesare Tonelli - RWL Drop Point Integral - custom knife
Blade: 60HRC RWL34 Stainless Steel
Handle: Loveless Micarta
Blade Length: 98mm.
Blade Thickness: 5mm.
Overall Length: 207mm.
Weight: 168g.
Lock: -
Clip: -
Sheath: Handmaded, Brown Leather
Notes: Fully handmaded in Italy by CIC Master Cesare Tonelli10094€409.02Out of stock -
Cesare Tonelli - Drop Point Integral - custom knife
Blade: 59HRC 440C Stainless Steel
Handle: Loveless Micarta
Blade Length: 98mm.
Blade Thickness: 5mm.
Overall Length: 207mm.
Weight: 168g.
Lock: -
Clip: -
Sheath: Handmaded, Brown Leather
Notes: Fully handmaded in Italy by CIC Master Cesare Tonelli10093€368.03Out of stock -
Sergio Consoli - N°098 Folding Walnut - Custom Knife
Blade: 61HRC RWL34 Stainless Steel
Handle: Walnut, Damascus and Titanium
Blade Lenght: 75mm.
Blade Thickness: 4mm.
Overall Lenght: 180mm.
Weight: 110g.
Lock: Liner lock
Clip: -
Sheath: -
Notes: Handmade in Italy by CIC Master Sergio Consoli9015€729.51Out of stock