Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: Available in different configurations
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

The Bad Medicine by Wander Tactical is a handcrafted knife designed to offer exceptional performance in any context. Manufactured in Italy with high-quality materials and meticulous workmanship, this tool is synonymous with strength and precision.

The D2 steel blade, treated with a raw finish, guarantees excellent wear resistance and reliable cutting. The ergonomic and durable G10 handle ensures a secure grip even in the most extreme conditions. 

Completed by a thermoformed Kydex sheath, compatible with the M.O.L.L.E. system, and accompanied by a certificate of guarantee and authenticity, this knife represents the perfect balance between traditional craftsmanship and modern innovation.

Intended use: All-round utility

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/61HRC
Blade finish: Raw
Handle: G10
Blade length: 150mm.
Blade thickness: 5mm.
Total length: 295mm.
Balance: advanced
Weight: 405g.
Sheath: thermoformed Kydex, with M.O.L.L.E. compatible belt loop.
Packaging: accompanied by a certificate of guarantee and authenticity.
Notes: knife entirely handmade, in every part.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, with only a small mark on the blade, no packaging or certificates
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: a small mark on the upper right side of the blade
* Marks on handle: None
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: Collection / Heavy Duty

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/61HRC with cryogenic tempering
Blade treatment: Raw
Handle: 2mm titanium scales with micarta grip
Blade length: 93mm.
Blade thickness: 5mm.
Closed length: 124mm.
Total length: 214mm.
Closed thickness: 24mm.
Weight: 193g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade
Closing: Rockers Arm 8.11
Clip: stonewashed titanium, removable and reversible
Packaging: Plastic case with Wander Tactical logos
Notes: Limited Edition, entirely handmade - knife previously purchased from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, has a couple of small scratches on the titanium clip and some imperceptible abrasions on the titanium
* Available on the market: Difficult to find
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: A couple of small scratches on the titanium clip and some imperceptible abrasions on the titanium
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

Mariner 2 – Heritage Series - The perfect EDC, born from legend.

Born in the 1980s from the pioneering vision of Bob Terzuola, the Mariner was conceived as a true EDC to carry every day, without compromise. Today, this revamped version pays homage to the original, combining aesthetics faithful to the spirit of the first model with a modern, compact and legally compliant design under 3".

The new Mariner 2 features a MagnaCut steel blade with a sheepsfoot profile, sharp, durable, and hardened to 64 HRC, set in a grade 5 titanium handle that guarantees strength without bulking up your pocket. Every detail has been carefully crafted: encapsulated ceramic bearings, steel liner lock with insert, 3D milled clip with the legendary dragon head logo, and a machined titanium thumb disc with dovetail joint.

This reissue is not only a tribute to the history of custom design, but also a celebration of mechanical innovation and high-end materials, all precision-crafted in Dallas, Texas. A piece that combines past and future, for those who demand the best from a pocket knife.

Intended use: EDC

Type of production: Industrial
Country of production: Texas, USA
Blade: CPM-MagnaCut 63/64HRC steel
Blade finish: stone washed
Handle: grade 5 titanium
Blade length: 76mm.
Blade thickness: 2.5mm.
Closed length: 106m.
Total length: 182mm.
Closed thickness: 11 mm
Weight: 101 g
Closure: Liner lock
Clip: Grade 5 titanium, machined from solid
Packaging: Cardboard box with Tactile Knife Company logos and warranty certificate
Notes: Design by Bob Terzuola - knife previously purchased from a private collection

Condition: Withdrawn from a private collection, previously purchased.
Condition Details: Overall in excellent condition.
Available on the market: NO
Edge: Factory edge.
Blade marks: None.
Handle marks: None.
Box: /
Sheath: /
Manuals, Certificates, and Warranties: /
Inspected and Certified: By our in-house lab.

The Spyderco Bob Terzuola Slipit C131 is a folding knife with a non-locking blade (Ball Joint Mechanism) designed by renowned master knifemaker Bob Terzuola. This model combines elegant design with advanced functionality, making it ideal for both collectors and knife enthusiasts.

Intended Use: Sport / EDC
Production Type: Industrial
Blade Origin: Taiwan
Blade Material: CPM-S30V stainless steel
Blade Treatment: -
Handle: Carbon Fiber
Blade Length: 75mm
Blade Thickness: 2.5mm
Closed Length: 100mm
Total Length: 175mm
Closed Thickness: 17mm
Weight: 70g
Lock Mechanism: Ball Joint
Clip: Stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: Design by Bob Terzuola

The Bob Terzuola Slipit C131 features a modified Wharncliffe blade with a razor-sharp edge, perfect for precise cuts. The carbon fiber handle provides a secure grip and refined aesthetics. The Ball Joint mechanism ensures secure closure without the use of a traditional lock, making it compliant with regulations in many jurisdictions. The reversible pocket clip allows discreet and convenient carrying. This knife represents a perfect fusion of traditional craftsmanship and modern innovation.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: Small abrasions given by being placed in kydex sheath.
* Marks on handle: None
* Box: /
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: GunKote
Handle: Micarta
Blade length: 65mm.
Blade thickness: 6.5mm.
Total length: 132mm.
Balance: backward
Weight: 198g.
Sheath: made of Kydex, thermoformed
Packaging: -
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production single piece produced in 2019
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: -
* Sheath: no
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratory

Intended use: Collection

Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: full-tang stainless steel RWL-34 60 / 61HRC
Blade treatment: -
Handle: holographic resin handle with titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Closed length: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 132g.
Closure: Liner Lock
Clip: -
Sheath: -
Packaging:
Notes: Handmade by Master Sergio Consoli - knife number 480 made in 2019

Intended Use: Collection / Heavy Duty

Production type: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Black Blood
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total length: 214mm.
Thickness when closed: 21mm.
Weight: 186g.
Opening: Carson Flipper system / Ambidextrous opening pins on blade.
Closure: Rockers Arm 8.11
Clip: stone washed titanium, removable and reversible
Packaging: plastic pouch with Wander Tactical logos
Notes: Limited Edition, produced entirely by hand, each example differs from the previous one in aesthetic finishes

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Discontinued, model dating back to 2019
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: WT original packaging
* Sheath: -
* Manuals, Certificates and Warranties: WT certificate
* Checked and certified by our internal laboratory

Intended use: Collection / Heavy Duty

Type of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Closed length: 124mm.
Total length: 214mm.
Thick when closed: 21mm.
Weight: 186g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade
Closing: Rockers Arm 8.11
Clip: in stone washed titanium, removable and reversible
Packaging: Plastic case with Wander Tactical logos
Notes: Limited Edition, produced entirely by hand, each piece differs from the previous one in aesthetic finishes

Knife withdrawn from a private collection - Limited edition production in Japanese CoS steel in SanMai dating back to 2018 and no longer available - In like new condition, no marks on the blade (never cut, never resharpened) or on the handle. Supplied with handmade Kydex sheath and Wander Tactical certificate - Checked and certified by our in-house Coltelleria Collini laboratory.

In collaboration with Wander Tactical we have decided to propose their new neck knife, the Raptor model, in an exclusive version with a satin blade that uses the famous Japanese San Mai steel produced by Takefu Steel. Specifically we used, for the central plate, the CoS at 61.5HRC (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: Neck Knife / Collection

Type of production: Artisan
Production Lama: Italy
Blade: integral, in Japanese laminated stainless steel (San Mai) with cutting edge in CoS at 61.5HRC with cryogenic hardening
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: in Kydex, thermoformed, with lanyard for Neck Knife use
Packaging: -
Notes: Each knife is unique and handcrafted

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Knife from private collection - Knife in mint condition, brand new - Checked and certified by our in-house laboratory.

Intended Use: Collection / Heavy Duty

Type of production: Handcrafted
Country of manufacture: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total length: 214mm.
Thickness when closed: 24mm.
Weight: 167g.
Opening: Carson Flipper system / Ambidextrous opening pins on blade
Closure: Rockers Arm 8.11
Clip: stone washed titanium, removable and reversible
Packaging: -
Notes: Limited Edition handcrafted by Dino Picco of Wander Tactical

Knife withdrawn from private collection - Overall in excellent condition, still with factory sharpening, a few small signs of oxidation - Distinguished by Copper Brush finish, not usual to find on Wander models and very rare ivory white G-10 handle - Checked and certified by our in-house laboratory.

Type of Production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Copper Brush
Handle: G-10
Blade Length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balance: backward
Weight: 605g.
Sheath: made of Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Notes: supplied with certificate of authenticity and warranty dated 12/20/2020 - knife withdrawn from private collection, overall in excellent condition

Absolutely like new - Comes from a private collection - Unique item made in 2020, prototype, does not correspond to any standard model of Wander Tactical production - Made entirely by hand.

Use: Collection / Utility / Hunting

Production type: Handcrafted
Country of Production: Italy
Blade: integral, japanese rolled steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
Blade finish: satin finish 
Handle: Paracord
Blade length: 90mm.
Blade thickness: 6.65mm.
Total length: 200mm.
Balance: backward
Weight: 180g.
Sheath: in kydex
Package: Certificate of authenticity
Notes: Unique piece of 2020 - Prototype: it doesn't correspond to any standard model of Wander Tactical production - Entirely hand made - Absolutely like new, coming from a private collection,

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Coltelleria Collini, we decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically we have used the carbonaceous V-Toku2 at 62/63HRC for the central plate and the stainless SUS410 for the two external plates, in order to guarantee a very high cutting capacity, penetration and edge holding together with an easy resharpening and maintenance. At the same time the blade has a remarkable resistance to corrosion and an important increase of resilience given by the type of extreme steel and the laminated structure.

As in the ancient swords of the Japanese Samurai.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: It is made of different types of metals alloyed together to create a composite that contains and intensifies the strengths of the metals taken individually:

- Longer cutting edge life
thanks to the use of high quality steels with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performance decidedly superior to those achieved with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For further information: collinisteel

Knife withdrawn from a private collection in excellent condition, re-sharpened - Complete with original certificate - Checked and certified by our in-house Coltelleria Collini laboratory.

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Row Finish
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balancing: set back
Weight: 605g.
Sheath: in Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Note:

Intended use: Collection

Type of production: Artisan by Maestro CIC Sergio Consoli
Lama production: Italy
Blade: full-tang in RWL-34 60 / 61HRC stainless steel
Blade treatment: -
Handle: carbon fiber
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 138g.
Closing: Liner Lock
Clip: carbon fiber
Sheath: -
Packaging:
Notes: Handmade by Maestro Sergio Consoli - knife number 271 made in 2009

Acknowledgments

I currently make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:

in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded the "best table on display"

always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"

moreover, I ranked second in the competition organized by LAME D'AUTORE magazine as the best fixed hunting blade

then in 2007 at "Scarperia" I won the third prize as the best closable

but above all again in 2007, I achieved, to my great satisfaction, the level of MASTER OF ITALIAN COLTELLINAI CORPORATION, recognition received at the first exam taken.

Presentation of the craftsman

Creating a hand knife is what I consider a real art form.
The satisfaction of seeing an object that comes from your own hands, that takes shape and that reaches mechanical, artistic and aesthetic perfection is what pays me more for all the hours of work and effort it takes to create a knife completely by hand.

The passion for "cutting irons" has always been in me since I was a child and has grown with me until the almost sudden decision to build my first knife on my own, it was a "need", almost an inner need that I couldn't put it off, my hands and my mind had to start creating, of course what I had always been passionate about ... the knife!

I started at 40, in 2003, practically self-taught, I had no manual work experience, but I had been a mechanical designer for many years and this allowed me to know perfectly the technique and all the various stages of mechanical processing.

Currently I am a member, with the rank of Maestro, which is the highest, of the Italian Knifemakers Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.

What I do now is what I consider my art form ..., to create "handmade, hunting and collectible knives".

They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I make above all folding knives, which satisfy more my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they cannot be seen, is what distinguishes a hand-made knife from an industrially made one .

The mechanics must then be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.

Of course, over the years I have refined my technique and currently I have improved even more the mechanics by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction and with an incredible sweetness.

With regard to the blades, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow exceptional wire holding and cutting quality for all types of use.

Pathically I make all the knives on my initial design, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "handmade".

Regarding the materials that I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damask, both stainless steel and carbon, for the uniqueness 'that they donate to the knife, since each damask is always different from another.

For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of colors, all beautiful, I also use the fossil ivory of mammoth, various briars, titanium and carbon fiber.

Most of the knives, however, are made entirely of steel, in order to then be engraved, always and rigorously by hand, to transform the knife even more into a real work of art ...

Rare pair of knives produced by United and designed by the renowned knives maker Gil Hibben. These knives come from a private collection and are in excellent condition, with original box but without sheath

United Kempo II UC1168
This model stands out for its unique features, suitable for Kenpo Karate enthusiasts. The UC1168 Kempo II knife, introduced in 1998 and later replaced by the Alaskan knife in 2003, features a Kenpo Karate emblem on the handle. The design includes a grip-enhancing angled guard, stylized after Kenpo's "Chinese Fist" grip for added stability and control. This knife measures approximately 31cm in total with an 18cm blade, made from stainless steel.

Type of production: industrial
Blade: 420 stainless steel
Country of production: Taiwan
Handle: micarta
Blade length: 165mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Weight: 521g.
Sheath: without sheath
Notes: original box, produced in 1998

The handle design and medallion make it a distinctive piece in any collection.

It comes in the original box, maintaining its impeccable condition, although it lacks a scabbard.

Pro Guide Hunter UC1203
The Pro Guide Hunter UC1203, dated 1999, is ideal for hunting and outdoor activities. This knife is manufactured by United Cutlery under the design expertise of Gil Hibben. The Pro Guide Hunter is recognized for its sturdy construction and ergonomic handle, which ensures comfort and efficiency during use. Like the UC1168, it is sold with its original box but without the sheath.

Type of production: industrial
Blade: 420 stainless steel
Country of production: Taiwan
Handle: micarta
Blade length: 110mm.
Blade thickness: 5.5mm.
Total length: 235mm.
Weight: 207g.
Sheath: without sheath
Notes: original box, produced in 1999