bing

Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

Shop By
Shopping Options
Set Ascending Direction

7 Items

  1. Randall Knives - Model 1-7 - Micarta Finger Grooves - Private

    The Randall Model 1 Fighter was one of the first models produced in Randall's Orlando workshop. A Model 1, personally made by Bo Randall, served as the prototype for the Springfield Randall, produced by the Northampton Cutlery Company near Springfield, Massachusetts, in 1943 and 1944 for issue to American military personnel.

    Since World War II, Randall knives have been among the world's best-known handmade knives and are still produced in the family-run Orlando workshop, much in the same way Bo made his knives in the late 1930s and early 1940s. The company has been managed by Bo's son Gary since 1970, currently joined by his sons Jason and Michael.

    KNIFE FROM A PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Excellent condition
    * Sharpening: Original
    * Marks on blade: None
    * Marks on handle: None
    * Packaging: -
    * Sheath: original, leather, in excellent condition
    * Manuals, Certificates and Warranties: -
    * Inspected and Certified by our in-house workshop

    Intended use: tactical / military

    Production type: handmade
    Country of manufacture: USA
    Blade: full tang in 440B stainless steel
    Blade finish: satin
    Handle: full brass guard and one-piece Micarta handle
    Blade length: 177mm.
    Blade thickness: 5mm.
    Overall length: 297mm.
    Balance: on the guard branch
    Weight: 358g.
    Sheath: belt sheath, brown leather
    Notes: previously purchased knife, acquired from a private collection
    AP-RK-1-7-MFG
    €0.00
    Only 0 left
    Only 0 left
    Out of stock
  2. Spartan Blades - Spartan-Ka-Bar Knife - FDE MagnaCut & Leather - SB54DEBKLTBK - PRIVATE COLLECTION - Knife

    KNIFE FROM PRIVATE COLLECTION
    Source: acquired from a private owner, previously purchased
    Condition: good, never used
    Available on the market: currently in production
    Sharpening: factory edge
    Marks on blade: -
    Marks on handle: light scratch on the pommel
    Box: not included
    Sheath: leather, with various superficial marks
    Manuals, Certificates and Warranties: not included
    Inspected and Certified by our internal laboratory

    On December 9, 1942, during World War II, KA-BAR presented a knife to the United States Marine Corps hoping it would become the standard-issue weapon. In cooperation with the Marine Quartermaster Department, the design was revised and production of an improved fighting and utility knife began.

    During the war, USMC KA-BAR knives became so recognized for quality and widespread use that “KABAR” became a common name. It was adopted by the Marines, Army, Navy, Coast Guard and Underwater Demolition Teams. In later years, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, Iraq and Afghanistan.

    In 2019, KA-BAR joined Spartan Blades to form Pineland Cutlery. CEO John Stitt wanted a “KA-BAR” with improved strength, durability and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel as meeting these requirements.

    CPM MagnaCut® is a high-carbon powder metallurgy steel produced by Crucible Industries and specifically designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment and PVD coatings.

    Intended use: Tactical / Military
    Production type: Industrial
    Country of manufacture: USA
    Blade: CPM MagnaCut steel 61/63HRC
    Blade finish: ZrN Flat Dark Earth
    Handle: Kraton G with 301 stainless steel guard and tungsten DLC treatment
    Blade length: 178mm
    Blade thickness: 4.2mm
    Overall length: 305mm
    Weight: 308g (412g with sheath)
    Sheath: black leather
    Packaging: -
    Notes: the Flat Dark Earth (FDE) coated blade, when inserted into and removed from the leather sheath, may show streaks or marks due to the dye used for the sheath. The blade can be cleaned with petroleum or acetone, re-oiled (for example with WD40 or light mechanical oil) and dried with a clean cloth to restore the original coating finish.
    SB-54DEBKLTBK-CP
    €380.00
    Only 0 left
    Only 0 left
    Out of stock
  3. Pohl Force - Tactical Eight SW knife - D2 steel - 5004 - PRIVATE COLLECTION - knife

    KNIFE RETIRED FROM A PRIVATE COLLECTION
    * Origin: Withdrawn from a private collector, previously purchased – SERIAL NUMBER 21-0076
    * Condition: Overall good, never used
    * Market availability: Currently discontinued
    * Sharpening: Factory edge
    * Blade marks: None
    * Handle marks: None
    * Box: not included
    * Sheath: Kydex
    * Manuals, Certificates & Warranty: not included
    * Inspected and Certified by our internal laboratory

    Based on the renowned MK-8, designer Dietmar Pohl developed the Tactical Eight, achieving a lighter and more compact tactical knife.

    The robust Bowie blade, over 17 cm long and 6 mm thick, is suitable for a wide range of applications. To ensure excellent edge retention and blade resilience, the well-known D2 tool steel was selected.

    The stonewashed finish creates a scratch-resistant surface and further improves corrosion resistance. A concealed hole at the end of the handle scales allows for the attachment of a lanyard (included).

    The Tactical Eight Kydex® sheath, with a material thickness of 2.5 mm, provides a solid foundation for a durable and well-engineered carry system, fully meeting the demanding requirements of a tactical knife.

    Intended use: Collection / Sport

    Blade: Full tang D2 steel, 59/60 HRC
    Handle: G-10
    Blade length: 174 mm
    Blade thickness: 6 mm
    Overall length: 315 mm
    Weight: 375 g (534 g with sheath)
    Sheath: Kydex
    Packaging: -

    PF-5004-CP
    €280.00
    Only 0 left
    Only 0 left
    Out of stock
  4. Extremaratio - Arditi Black - Single Edge Dagger - PRIVATE COLLECTION - Knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Provenance: withdrawn from a private collection, previously purchased.
    * Condition: Overall in good condition
    * Commercially available: Still in catalog.
    * Sharpening: Factory.
    * Marks on blade: Marks and abrasions.
    * Marks on handle: Small signs of wear and tear.
    * Box: Present, not complete (absence of warranties and plastic bags).
    * Scabbard: Present, in good condition.
    * Manuals, Certificates and Warranties: - -
    * Checked and Certified by our in-house laboratory

     

    Intended Use: Tactical/Military/Collection

    Production type: Industrial
    Country of Production: Italy
    Blade: stainless steel N690Co 58HRC
    Blade Treatment: Burnishing MIL-C-13924
    Handle: Polymer
    Blade Length: 167mm.
    Blade thickness: 6.3mm.
    Total length: 270mm.
    Weight: 224g.
    Sheath: Nylon thigh piece
    Packaging: cardboard box with Extrema Ratio logos
    Notes: Limited edition in 2018 pieces - Edition to celebrate 100 years of the Italian Ardites

    ER-AR-BK-CP
    €0.00
    Only 0 left
    Only 0 left
    Out of stock
  5. Randall Knives - Model 16 Diver Knife - Micarta - PRIVATE COLLECTION - knife

    The Model 16 was designed to meet the demand for an almost indestructible multi-purpose knife, including intensive use in salt water (careful cleaning and maintenance is however recommended). A special wax-impregnated sheath is included.

    7″ (17.8cm) stainless steel blade with 6.5mm thickness. The top of the blade is slightly serrated to allow easy thumb placement. Black Micarta handle. Extra-heavy 7/8″ (2.2cm) wide tang that extends through a channel in the handle, securely fixed with epoxy. 

    KNIFE TAKEN FROM PRIVATE COLLECTION
    * Type: Previously purchased, manufactured in 2023
    * Condition: Very good condition, like new
    * Sharpening: Original
    * Marks on blade: None
    * Marks on handle: None
    * Packaging: -
    * Scabbard: original, leather, in very good condition
    * Manuals, Certificates and Warranties: - - * Checked and Certified by our in-house laboratory.
    * Checked and certified by our in-house laboratory

    Intended use: utility

    Type of production: handcrafted
    Country of manufacture: USA
    Blade: stainless steel 440B
    Blade finish: satin
    Handle: Micarta
    Blade length: 178mm.
    Blade thickness: 6.5mm.
    Total length: 297mm.
    Balance: on the guard
    Weight: 362g. (522g. including scabbard)
    Sheath: Brown leather with belt loop
    Notes: -

    AP-RAND-16
    €0.00
    Only 0 left
    Only 0 left
    Out of stock
  6. Randall Knives - Modelo 1-7" - Micarta Finger Grooves - COLECCION PRIVADA - cuchillo de coleccionista

    CUCHILLO DE COLECCIÓN PRIVADA
    * Tipo: Comprado Anteriormente 
    * Condición: Muy buen estado
    * Afilado: Original
    * Marcas en la hoja: Ninguna
    * Marcas en el mango: Ninguna
    * Embalaje: -
    * Vaina: original, cuero, en muy buen estado
    * Manuales, Certificados y Garantías: - - * Comprobado y certificado por nuestro laboratorio interno.
    * Comprobado y certificado por nuestro laboratorio interno

    El Randall Model 1 Fighter fue uno de los primeros modelos producidos en el taller de Randall en Orlando. Un Modelo 1, fabricado por el propio Bo Randall, sirvió como prototipo para la Springfield Randall que fue producida por la Northampton Cutlery Company cerca de Springfield, Massachusetts, en 1943 y 1944 para uso del ejército estadounidense.

    Uso previsto: táctico / militar

    Tipo de fabricación: artesanal
    País de fabricación: USA
    Hoja: espiga completa en acero inoxidable 440B
    Acabado de la hoja: satinado
    Empuñadura: protector pasante de latón y empuñadura monolítica de micarta
    Longitud de la hoja: 177 mm.
    Grosor de la hoja: 5mm.
    Longitud total: 295mm.
    Equilibrio: en la rama de la guarda
    Peso: 350g.
    Funda: cinturón, cuero negro
    Notas: Cuchillo comprado anteriormente, retirado de colección privada

    AP-RK-1-7MFG
    €0.00
    Only 0 left
    Only 0 left
    Out of stock
  7. Chris Reeve - Neil Roberts Warrior Knife Fixed Blade 6" - PRIVATE COLLECTION - knife

    Knife withdrawn from private collection - Unobtainable specimen, now out of production - Like new, perfect, undamaged, never taken out of the box - Complete with every certificate - Perfect original factory sharpening - Absolutely flawless specimen - Checked and certified by our in-house laboratory

    Intended Use: Fighter / Tactical / Collection

    Type of manufacture: Midtech
    Blade: stainless steel CPM-S30V 55/57HRC
    Country of Production: USA
    Handle: Canvas Micarta
    Blade length: 170mm.
    Blade thickness: 5.8mm.
    Total length: 290mm.
    Balance: set back 1cm. from the lower guard branch
    Weight: 356g.
    Sheath: by SpecOps, cordura
    Notes: Discontinued and unobtainable specimen - withdrawn from private collection - New, intact, perfect, never used, with original box and warranty certificates

    CR-NR-CP
    €0.00
    Only 0 left
    Only 0 left
    Out of stock
Set Ascending Direction

7 Items

Sports, Outdoor, Tactical, and Collectible Knives: The Collini Selection

For over 50 years, Coltelleria Collini has been a reference point in Italy for the world of specialized cutlery. Since 1968, we have been selecting sports, outdoor, professional, and collectible knives, collaborating exclusively with official brands, historical manufacturers, and master artisans.

In this category, you will find thousands of original knives, chosen for demanding collectors, EDC, outdoor, and bushcraft enthusiasts, as well as professional operators who require reliability, quality materials, and consistent performance over time.

Military & Tactical Knives

Knives designed for heavy-duty and professional use, where robustness and reliability are paramount. We select world-leading brands such as Extrema Ratio, Zero Tolerance, Ka-Bar, and Cold Steel. Fixed and folding blades developed to withstand extreme conditions.

Sports & Outdoor Knives

From trekking to hiking, from bushcraft to everyday carry (EDC). Discover the Italian excellence of Fox Knives and LionSteel, the Nordic solidity of Fallkniven, and great classics like Opinel and Spyderco.

Collectible & Rare Knives

Custom, vintage, limited edition, and discontinued knives. Through our Approved program, we acquire, evaluate, and certify private collections, offering our customers access to rare, display, and investment-grade blades.

Why choose Coltelleria Collini since 1968

We are not just an e-commerce site, but a historic cutlery shop with direct experience on the products we offer. Buying from us guarantees:

  • Certified Originality: we are official dealers for all brands we carry.
  • Real Stock with fast shipping.
  • Qualified Assistance and technical advice before and after sales.

Knives Catalog PDF Want to know more? Download the Knives Catalog for free (PDF)

Knives FAQ

What is the best knife brand?

There is no absolute "best" brand, but specific leaders for each use. For tactical and professional use, Extrema Ratio and Zero Tolerance are top tier. For outdoor and EDC, Fox, LionSteel, Fallkniven, and Spyderco excel.

Is it legal to buy sports knives online?

Yes, buying sports and collectible knives online is generally legal for adults. However, laws regarding carrying and transporting knives in public vary significantly by country. Always check your local regulations.