Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows some barely noticeable signs of aging on the Zytel handle and a couple of small spots of oxidation on the tip of the blade (right side), which in no way compromise its practical use
* Commercially available: Discontinued
* Sharpness: Factory-sharpened; could be improved
* Marks on blade: A couple of small spots of oxidation on the tip of the blade, on the right side, which in no way compromise its practical use
* Marks on handle: A few barely noticeable signs of aging
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

Intended use: sports / collectible

Production type: Industrial
Country of manufacture: Japan
Blade: VG-10 stainless steel
Blade finish: Satin
Handle: Zytel, with stainless steel liners
Blade length: 90 mm.
Blade thickness: 4 mm.
Closed length: 120 mm.
Overall length: 210 mm.
Thickness when closed: 20 mm.
Weight: 135 g.
Closure: Arc-Lock (crossbar lock)
Clip: removable, stainless steel
Packaging: -
Notes: Previously purchased knife, from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private seller, previously purchased
* Condition: Overall in excellent condition, with a few minor signs of wear on the guard and pommel
* Commercial Availability: Discontinued in this configuration (current versions feature different steels, blade shapes, and lengths)
* Sharpness: Original, could be sharpened
* Marks on the blade: Several small superficial scratches on the blade finish and the spine of the knife, as shown in the images. Minor signs of oxidation near Harsey’s signature.
* Marks on the handle: None
* Box: Missing
* Sheath: Present and in excellent condition
* Manuals, Certificates, and Warranties: None
* Inspected and certified by our in-house laboratory

The Chris Reeve Knives Green Beret Fighter 5.5" is a professional fixed-blade knife designed to offer the ultimate balance between durability, control, and reliability. Crafted to the high manufacturing standards that distinguish Chris Reeve Knives, it was created as an operational tool capable of delivering consistent performance even under the most demanding conditions.

The 5.5-inch CPM-S30V steel blade combines excellent mechanical strength with superior edge retention. The bayonet grind profile is engineered to deliver precision and penetration, while the knife’s overall balance ensures safe and natural control during use.

The handle, featuring contoured Canvas Micarta scales, provides an ergonomic and stable grip, adapting well even to use with gloves or in harsh environments. The texture and shape of the scales allow for comfortable and safe handling, maintaining excellent control of the knife.

Intended Use: Collectible / All-Round Utility / Fighter

Manufacturing Type: Midtech
Blade: CPM-S30V stainless steel with CeraKote surface treatment
Country of Manufacture: Boise, Idaho, USA
Handle: Black Canvas Micarta
Blade Length: 140 mm
Blade Thickness: 5.5 mm
Overall length: 278 mm.
Balance: on the lower guard
Weight: 320 g.
Sheath: BlackHawk! nylon, with Kydex lining and front pocket with Velcro. Suitable for both belt carry and M.O.L.L.E. compatibility.
Notes: Previously purchased knife—from a private collection

KNIFE FROM A PRIVATE COLLECTION
* Origin: Previously purchased knife from a private collection
* Condition: 2008 model, overall in excellent condition
* Commercial Availability: Discontinued
* Sharpness: Factory-sharpened, could be improved
* Blade Condition: Minor cosmetic marks on the DLC finish due to age
* Handle Condition: None
* Box: -
* Sheath: Included
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The Zero Tolerance 0100 is one of the first knives produced by Zero Tolerance, the premium division of Kai USA, which was launched in 2006 to develop professional tools for military personnel, law enforcement, and first responders. The 0100 model was, in fact, one of the first three fixed-blade knives in the original lineup, alongside the 0121 and 0150 models.

The design bears the unmistakable stylistic signature of Ken Onion, the renowned American designer already responsible for numerous successes at Kershaw. The distinctive “S”-curved blade offers an unusual combination of cutting ability, power, and precision, making the ZT0100 suitable for both tactical applications and the most demanding outdoor use.

For its construction, Zero Tolerance chose CPM 3V, a steel then considered cutting-edge for its strength and impact resistance, paired with a tungsten DLC coating and three-dimensionally machined G-10 scales. This combination helped solidify the brand’s early reputation as a manufacturer of “overbuilt” knives, designed without compromise for field use.

Today, the ZT 0100 is a discontinued model particularly prized by collectors, as it is considered one of the knives that helped define the Zero Tolerance brand’s identity in its early years.

Intended Use: Tactical / Sporting / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Full tang, CPM-3V carbon steel
Blade Finish: Tungsten DLC coating
Handle: G10
Blade Length: 146mm.
Blade thickness: 4.8 mm.
Overall length: 267 mm.
Weight: 317 g.
Sheath: Nylon, belt-mounted, with thermoformed Kydex lining
Packaging: -
Notes: Previously purchased knife, from a private collection

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Knife manufactured in 2010, acquired from a private individual, previously purchased
* Condition: Overall in excellent condition, with some signs of wear, especially on the sheath
* Available on the market: Discontinued
* Sharpening: Professionally resharpened
* Marks on blade: A few small signs of wear, visible against the light
* Marks on the handle: None
* Box: Present and complete
* Sheath: Present, with some minor signs of wear that do not compromise its use
* Manuals, Certificates, and Warranties: Present
* Inspected and Certified by our in-house laboratory

Discontinued and increasingly difficult to find, the Chris Reeve Nyala is considered one of the most iconic and highly regarded fixed-blade knives in the Chris Reeve Knives lineup. Originally designed as a versatile hunting and outdoor knife, it represents one of the most successful interpretations of the modern field knife, combining clean lines, excellent ergonomics, and a full-tang construction designed to ensure absolute reliability.

Crafted from CPM S35VN steel and finished to the exceptionally high quality standards that have made the brand famous, the Nyala offers benchmark cutting performance, great durability, and a versatility that makes it ideal for outdoor use as well as for hunting.

Produced until 2020, the Nyala perfectly embodies Chris Reeve’s design philosophy: eliminating the superfluous to create a functional, durable, and uncompromising tool. Today, its limited availability on the market further enhances its appeal, making it one of the most sought-after models among both brand enthusiasts and collectors of contemporary custom and semi-custom knives.

Intended Use: Hunting/Sporting

Production Type: Midtech
Country of Manufacture: USA
Blade: Full tang, CPM-S35VN stainless steel, 58/59 HRC
Blade Finish: Stonewashed
Handle: Brown canvas Micarta
Blade Length: 95mm.
Blade thickness: 4.5mm.
Overall length: 216mm.
Weight: 175g.
Sheath: Brown leather by G. Feller Casemakers
Packaging: Cardboard box with Chris Reeve logos; warranty certificates
Notes: 2010 knife previously purchased, from a private collection, full set

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private seller, previously purchased
* Condition: Overall in excellent condition
* Availability on the market: Hard to find
* Sharpening: Factory-sharpened
* Marks on blade: A few small abrasions visible against the light on the mirror finish
* Marks on handle: None
* Box: Present and complete
* Sheath: /
* Manuals, Certificates, and Warranties: Present
* Inspected and Certified by our in-house laboratory

The Rockstead HIGO II in titanium is not simply a high-end folding knife: it is the ultimate embodiment of Japanese philosophy applied to cutting, where every detail is pushed to the limits of perfection.

The minimalist, flawless titanium handle serves as a counterpoint to a ZDP-189 blade hardened to extreme hardness and finished with an almost unreal mirror polish. The result is not merely aesthetic: it is a living surface, capable of gliding through material with a smoothness and continuity that few knives in the world can offer.

Rockstead’s proprietary convex geometry does more than just cut: it separates, controls, and guides. It is a blade designed for those who recognize the difference between extreme sharpness and true long-term efficiency.

The HIGO II is an object for connoisseurs, where tolerances, treatments, and finishes are not mere technical specifications, but part of a precise language.

Intended use: Collectible / Sport

Production type: Midtech
Country of manufacture: Sakai - Japan
Blade: ZDP-189 stainless steel, hardened to 66.5 HRC
Blade finish: mirror polished
Handle: titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Closed thickness: 12.2mm.
Weight: 136g.
Opening mechanism: ambidextrous pivot 
Washers: brass
Closure: FrameLock with SKD11 striker at 61HRC
Clip: removable, 420J2 stainless steel with PVD coating
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: knife from a private collection, previously purchased

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Knife from 2018 in excellent overall condition, never used for cutting, has very small spots of oxidation on the blade that do not compromise its practical use in any way
* Available on the market: Model out of production and no longer available on the market
* Sharpness: Factory sharp
* Marks on blade: Very small signs of oxidation that do not compromise its use
* Marks on handle: None
* Box: Present and complete
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

Intended use: Tactical/Collection

Type of production: MidTech
Country of production: USA
Blade: D2 steel 
Blade finish: Tumbled & Satin
Handle: full titanium
Blade length: 95mm.
Blade thickness: 5mm.
Total length: 227mm.
Thickness when closed: 13mm.
Weight: 254g.
Closure: Frame Lock
Clip: removable, titanium, with tumbled finish
Packaging: tactical polymer case with Medford logos, cardboard outer box, certificates, and warranties
Notes: discontinued model, produced in 2018, previously purchased and from a private collection

RETIRED KNIFE FROM PRIVATE COLLECTION
* Provenance: Withdrawn from a private individual, previously purchased
* Condition: Overall in excellent condition, has light surface scratches on the steel handle
* Available on the market: Seventh generation of the model, produced only between 1999 and 2001, currently out of catalogue and out of production
* Sharpening: Factory
* Signs on blade: None
* Handle marks: light surface scratches
* Box: Present, complete and in excellent condition
* Sheath: -
* Manuals, Certificates and Guarantees: Present
* Controlled and Certified by our in-house laboratory

Originally launched in 1987, the Co-Pilot was sold as a small travel knife with a two-inch blade, designed to be carried on airplanes so you never give up a handy pocket or money clip once you arrive at your destination. Times have changed, but the design continues to prove its full validity.

Intended use: Sporty/Collection

Type of production: Industrial
Country of production: Japan
Blade: In stainless steel ATS-55
Blade finish: satin
Handling: stainless steel
Blade length: 51mm.
Blade thickness: 2.5mm.
Closed length: 76mm.
Total length: 127mm.
Weight: 74g.
Locking system: Back Lock
Clip: removable, stainless steel
Packaging: carton box, manuals and warranty
Note: Previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Excellent, never used and never removed from its sheath, which shows some minor abrasions due to age and storage
* Available on the market: Out of production in this variant
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: Present, with some minor abrasions due to age and storage
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Kiku Matsuda is one of the most famous artists and scholars of sharpening in Japan. You probably already have a knife in your collection that is the result of his passion: he has been collaborating for several years with SOG, William Henry, Pro-Tech, and Randall Kings, developing blade bevels, sharpening, and polishing techniques for them.

Intended use: Tactical

Type of production: Handcrafted
Country of production: Japan
Blade: D2 steel hardened to 61HRC
Blade finish: Acid etching
Handle: Green Canvas Micarta 
Blade length: 90mm.
Blade thickness: 4.8mm.
Total length: 204mm.
Weight: 188g.
Sheath: Sunloid KD (Kydex) with Tek-Lok attachment
Packaging: -
Notes: Kiku Matsuda won the prestigious Blade Show “Knife Of The Year Awards” in 2007.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: 2012 model withdrawn from a private collection, previously purchased and used, probably carried a lot in a pocket or backpack
* Condition: Mechanically perfect, blade without marks - little use - titanium handles heavily abraded/worn from friction, probably carried often in a jeans or trouser pocket, which over time has abraded the finish and micro-shot peening of the titanium
* Available on the market: Out of production
* Sharpness: Factory sharp, good, could be improved
* Marks on blade: None
* Marks on handle: Titanium handles heavily abraded/worn from friction, probably carried often in a jeans or trouser pocket, which over time has abraded the finish and micro-shot peening of the titanium
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

Intended use: collection/sports

Type of production: Midtech
Country of production: USA
Blade: CPM-S35VN stainless steel 58/59HRC
Handle: Titanium with micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Closed thickness: 17mm.
Weight: 134g.
Lock: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificates - knife previously purchased and used, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: in excellent condition, with some minor signs of wear
* Available on the market: unique, handmade piece
* Sharpness: original
* Marks on blade: None
* Marks on handle: some minor abrasions due to wear and tear
* Packaging: handmade leather case with cord
* Sheath: -
* Manuals, certificates and guarantees: Business card and certificate of authenticity, difficult to read due to ink discolouration over time
* Checked and certified by our in-house laboratory

Sardinia boasts a thousand-year-old tradition in metalworking and knife production, with a particular concentration in the Guspinese-Arburese-Gonnese area, historically linked to the mines of Montevecchio. This area is home to iconic models such as the Arburesa and the Guspinese (Sa Kuspidesa), symbols of craftsmanship handed down through the ages. This is where the work of Gian Paolo Cancedda, aka Furitto, comes in. He is a master knife maker who combines loyalty to tradition with technical research, helping to keep Guspinese cutlery alive and recognisable throughout the world.

Intended use: Regional / Collection

Type of production: Handcrafted
Country of production: Guspini, Sardinia, Italy
Blade: Sandvik 12C27 stainless steel
Blade treatment: satin finish
Handle: solid cow horn tip with acid-treated titanium collar
Blade length: 96 mm.
Blade thickness: 2 mm.
Closed length: 102 mm.
Total length: 199 mm.
Closed thickness: 18 mm.
Weight: 38 g.
Closure: no blade lock
Clip: -
Sheath: -
Packaging: leather case with handmade lace, craftsman's business card and certificate of authenticity from the Italian Knife Makers' Guild, difficult to read due to ink discolouration over time
Notes: knife previously purchased from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

The Benchmade Anthem is one of the most daring and iconic knives ever made by the American brand. A “carte blanche” project, now out of production, it stands out for its integral monoblock titanium construction, high-level mechanical workmanship, and the best interpretation ever of the famous Axis Lock, redesigned here to ensure exceptional strength and fluidity. Elegant, slim, and surprisingly ergonomic, the Anthem is not just a knife, but a true statement of passion and engineering, designed for connoisseurs and collectors.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV steel 59/61HRC
Blade treatment: stonewashed
Handle: integral, bronze-colored anodized titanium
Blade length: 89mm.
Blade thickness: 2.85mm.
Closed length: 116mm.
Total length: 205mm.
Weight: 104g.
Closure: Axis Lock
Clip: Anodized titanium
Packaging: Cardboard box with Benchmade logos
Notes: knife out of production, previously purchased, from a private collection

KNIFE RETRIEVED FROM A PRIVATE COLLECTION
* Origin: Retrieved from a private collector, previously purchased
* Condition: Generally good, never used
* Commercial availability: Out of production in this configuration
* Sharpening: Factory edge
* Blade marks: A slight “polishing” mark on the left side
* Handle marks: None
* Box: Present, not in like-new condition
* Sheath: -
* Manuals, Certificates and Warranty: -
* Inspected and Certified by our internal laboratory

An iconic knife in Cold Steel’s production, known for its robustness and reliability. Compared to more recent versions, it stands out for the Ultra Lock™ blade locking system, which allows smoother opening than the more recently adopted Tri-Ad Lock™.

Intended use: Tactical / Military
Production type: Industrial
Blade: AUS-8A stainless steel
Blade finish: Tuff-Ex™, the specific name used by Cold Steel for its high-resistance Teflon-based coating
Blade manufacturing: Taiwan
Handle: Aluminum with Grivory insert
Blade length: 90 mm
Blade thickness: 3.5 mm
Closed length: 142 mm
Overall length: 232 mm
Balance: -
Weight: 198 g
Locking system: Ultra Lock™
Clip: Removable and reversible, stainless steel
Sheath: -
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: Available
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

Inspired by the iconic Native, the Shaman echoes its ergonomics and dynamics of use in a larger and even more powerful format. The CPM-S30V stainless steel blade, with full-flat sharpening and functional tip, guarantees high performance and great versatility. The famous Round Hole ensures quick, ambidextrous opening, while the G-10 handle with skeletonized steel liners incorporates the solid Compression Lock for safe and immediate use.

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-S30V stainless steel with full flat grind
Blade treatment: Black DLC
Handle: G10 with stainless steel liners with DLC treatment
Blade length: 91mm.
Blade thickness: 3.7mm.
Closed length: 119mm.
Total length: 210mm.
Weight: 147g.
Closure: Compression Lock
Clip: stainless steel with Black DLC treatment, removable and multi-position
Packaging: cardboard box with Spyderco logos
Notes: Model inspired by the Native, with dimensions increased by approximately 20% - knife previously purchased from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: in perfect mechanical condition, aesthetically shows some abrasion and signs of wear due to the passage of time
* Available on the market: iconic model from the early 2000s, now out of production
* Sharpness: Factory sharpness, could be improved
* Marks on blade: some minor abrasions due to age
* Marks on handle: cosmetic abrasions due to age
* Box: -
* Manuals, certificates, and warranties: -
* Checked and certified by our in-house laboratory

Directly derived from military specifications, this folding knife is designed to replace a fixed blade in the most demanding operational situations. To ensure maximum reliability, extremely robust materials, increased thicknesses, and a solid and secure back lock opening/closing system have been used.

A manual safety lock ensures maximum protection during use, drastically reducing the risk of accidental closure. When inserted in the closed position, it also prevents the knife from being immediately used against the operator in the event of theft.

Materials and workmanship
All components are machined from solid blocks using high-precision CNC machines, while assembly, adjustment, and sharpening are carried out by hand. The blade is made of N690 cobalt stainless steel, known for its high mechanical strength, great cutting ability, edge retention, and excellent corrosion resistance. It has a flat grind and a hardness of 58 HRC.

The scales are made of Anticorodal, an aluminum alloy that is highly resistant to stress and oxidation. The tang, made of hardened N690, acts as an effective emergency glass breaker. Screws, pins, and clips are made of burnished stainless steel, while the blade, lever, and tang are protected by Testudo treatment, which is highly resistant to abrasion and oxidation. The scales are black anodized.

Intended use: tactical/military

Blade: N690Co 58HRC stainless steel with burnished “testudo” finish
Country of manufacture: Italy
Blade length: 95mm.
Blade thickness: 6.3mm.
Closed length: 127mm.
Total length: 220mm.
Handle: Anticorodal, 4.5mm thick
Weight: 200g.
Closure: Back Lock with additional safety system, also functioning when the blade is closed
Clip: removable and reversible, stainless steel
Sheath: -
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, with only a small mark on the blade, no packaging or certificates
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: a small mark on the upper right side of the blade
* Marks on handle: None
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: Collection / Heavy Duty

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/61HRC with cryogenic tempering
Blade treatment: Raw
Handle: 2mm titanium scales with micarta grip
Blade length: 93mm.
Blade thickness: 5mm.
Closed length: 124mm.
Total length: 214mm.
Closed thickness: 24mm.
Weight: 193g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade
Closing: Rockers Arm 8.11
Clip: stonewashed titanium, removable and reversible
Packaging: Plastic case with Wander Tactical logos
Notes: Limited Edition, entirely handmade - knife previously purchased from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Like new, never used, no packaging
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Tigerstripe black-oxide BlackWash
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: knife previously purchased and used, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: 2007 model, like new, mechanically perfect, no signs of use or wear
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present and complete
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house lab

The T01 SpydeRench marks the return of a revolutionary classic in the world of multi-tools. Designed by an aerospace engineer in collaboration with Spyderco's R&D department, this compact tool combines precision engineering and advanced functionality.

Made from corrosion-resistant 17-4ph stainless steel, it features a genuine Spyderco AUS-8 blade that opens and closes with one hand, a pocket clip, an adjustable roll pin wrench up to 9/16", and a two-position plier with superior comfort.

Complete with interchangeable bits and a multifunction diamond file, the T01 SpydeRench offers exceptional versatility: it can extend, lock in various configurations, and even separate into two independent tools. A unique multi-tool, designed for those who demand the best in every situation.

Intended use: Sports / Multipurpose

Type of production: industrial

Country of manufacture: Taiwan
Blade: AUS-8 stainless steel at 58HRC
Blade finish: satin
Handle and accessories: 17-4ph stainless steel
Blade length: 56mm.
Blade thickness: 2.5mm.
Closed length: 111mm.
Total length: 170mm.
Weight: 68g.
Closure: Back Lock
Clip: stainless steel
Notes: previously purchased product from a private collection - unique hybrid product combining multi-purpose pliers, screwdrivers, and knife

KNIFE RETIRED FROM PRIVATE COLLECTION
* Origin: Retired from a private collection, previously purchased and professionally resharpened
* Condition: Overall in excellent condition
* Available on the market: 2017 model - available in different configurations and steels
* Sharpening: Professionally resharpened
* Marks on blade: Minimal signs of resharpening
* Marks on handle: None
* Box: Pouch with zip
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: collection/sport/military

Type of production: Midtech
Country of production: South Africa
Blade: CPM S35VN steel
Blade treatment: black
Handle: blackwashed titanium
Blade length: 95mm.
Blade thickness: 4.5mm.
Closed length: 130mm.
Total length: 226mm.
Closed thickness: 14mm.
Balance: 2cm behind the guard
Weight: 210g.
Opening: Flipper on bearings
Closure: Frame Lock
Clip: titanium, machined from solid
Packaging: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Mechanically in excellent condition - Aesthetically shows some slight abrasion on the titanium handles due to use and carrying
* Available on the market: Still available
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: Minor abrasions due to use and carrying, which do not compromise its use in any way
* Box: Present and complete
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

ROK, part of the SOLID knife family, is made from a single piece of aluminum or titanium and introduces two major innovations. The first is the new H.WAYL System, a LionSteel patent that allows the clip to disappear inside the handle when the knife is in use, reappearing only when needed. The second is the integration of NFC technology into the packaging, which allows the user to immediately access all product information—from maintenance and the production process to content dedicated to the LionSteel brand—simply by placing their smartphone close to the packaging.

As with the TRE model, the user can remove the flipper to obtain a more traditional, two-handed blade opening. The ROK also retains the proven Rotoblock safety system and a steel tip at the end of the blade lock bar, which helps prevent breakage or wear due to contact with the blade itself.

Intended use: Sports/Tactical

Type of production: Industrial
Country of production: Italy
Blade: M390 stainless steel at 59/60HRC 
Blade treatment: Satin finish
Handle: Titanium
Blade length: 86mm.
Blade thickness: 4.5mm.
Total length: 198mm.
Weight: 156g.
Closure: Frame Lock with steel latch and manually operated Rotoblock safety system
Clip: concealed, machined from solid blue anodized titanium
Packaging: cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings - possibility of removing the flipper system guard - previously purchased product from a personal collection

KNIFE FROM PRIVATE COLLECTION
* Type: Previously purchased, from a private collection
* Condition: As new
* Availability: Rare 1980s/90s bowie, discontinued and no longer available
* Sharpening: Factory edge
* Blade marks: -
* Handle marks: -
* Box: Present, with green foam interior
* Sheath: Present, in excellent condition
* Manuals, Certificates, and Warranty: -
* Inspected and certified by our in-house workshop

The Puma Skinmaster 11 6010 with stag horn handle is a premium hunting knife, forged from a single block of 1.4116 steel according to the renowned Solingen tradition. Designed for skinning, it offers a perfect balance between strength and handling. The thick, short blade ensures precision and durability, while the genuine stag horn handle adds elegance and excellent ergonomics. Each piece is unique, with natural grain patterns that make it both a working tool and a collector’s item. Equipped with a high-quality leather sheath, the Puma Skinmaster is the ideal companion for demanding hunters and for those seeking a knife that can face any outdoor challenge with style and reliability.

Intended use: Skinning / hunting
Production type: Fully forged (integral) from a single piece of steel
Country of origin: Germany (Solingen)
Blade: 1.4116 stainless steel (DIN WN 1.4116), hardness 55–57 HRC
Blade finish: Satin
Handle: Stag horn
Blade length: 93 mm
Blade thickness: 5 mm
Overall length: 204 mm
Weight: 240 g
Package: Leather sheath; wooden box
Notes: Each handle is unique thanks to the natural grain of stag horn; a balanced, durable knife ideal for intensive use

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: In excellent condition, shows a scratch of about 2.5 cm on the blade
* Commercial Availability: Hard to find
* Sharpening: Factory edge, can be improved
* Blade Marks: shows a scratch of about 2.5 cm on the blade
* Handle Marks: -
* Box: -
* Sheath: in excellent condition, complete
* Manuals, Certificates and Warranties: -
Checked and Certified by our in-house workshop

The Buck 192 Vanguard is a premium-quality hunting knife, made in the USA and designed to deliver outstanding performance in all outdoor situations. The ergonomic handle made of fine wood with brass fittings gives the knife a classic and sturdy appearance, while the drop point blade in 420HC stainless steel ensures a reliable and long-lasting cut.

192 - with hyphen: this model features the marking “192-”, a production detail found on Buck knives made in the 1990s. This makes the knife particularly interesting for collectors and fans of the American brand.

Blade length: 102 mm
Total length: 216 mm
Blade material: 420HC stainless steel
Handle: fine wood with brass bolsters and scales
Sheath: high-quality brown leather
Production: Made in USA

This knife is ideal for hunting, hiking, camping, or as a collectible item. The Buck 192 Vanguard combines functionality, design, and reliability in a single tool appreciated worldwide.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition
* Available on the market: Difficult to find
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Nylon pouch with zip
* Manuals, certificates, and warranties: Present
* Checked and certified by our in-house laboratory

Inspired by the legendary M-48 Patton tank and its four-man crew, the M48 combines military toughness with modern design. A hybrid flipper on bearings, with an aluminum handle, titanium spring, and the new OTL system with reversible clip. Almost 22 cm in total length, this is a truly versatile knife, perfect for everyday use thanks to its hybrid structure.

Equipped with the innovative Magnus Edged tip, hand-sharpened for a unique profile and with fun “Easter Eggs” engraved on the blade and clip for an extra touch of character.

Intended use: EDC / Sports 

Type of production: MidTech
Country of production: USA
Blade: CPM-S45VN stainless steel
Blade finish: Tumbled
Handle: PVD aluminum and tumbled titanium
Blade length: 99 mm.
Blade thickness: 3.1 mm.
Closed length: 117 mm.
Total length: 21.8 mm.
Closed thickness: 10.1 mm.
Weight: 105 g.
Closing system: Frame Lock
Clip: titanium, removable and reversible
Packaging: cardboard box with Medford logos, zip pouch, stickers, and morale patch
Notes: Previously purchased knife from a private collection

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: In excellent condition, never used, with some minor signs of wear
* Available on the market: Difficult to find
* Sharpness: Factory sharpness, could be improved
* Marks on blade: Some minor signs of wear
* Marks on handle: Some minor signs of wear
* Box: -
* Sheath: in excellent condition, complete
* Manuals, Certificates, and Warranties: -
Checked and Certified by our in-house laboratory

Created for survival, it became a legend.

The Randall Model 18 is much more than a knife: it is a symbol of resistance, ingenuity, and determination. Created to accompany military pilots on the most extreme missions, it has won over generations of adventurers, explorers, and collectors around the world. With its tubular handle and unmistakable battle design, it embodies the essence of true survival—where only reliability, strength, and the ability to adapt to any situation matter.

Today, as then, it is the perfect ally for those who are not satisfied with just any knife. For those looking for a faithful companion, ready for anything. For those who love to own a piece of history, hand-forged in the United States, still according to tradition.

A timeless icon, built to last a lifetime. And beyond.

Intended use: All-round utility/survival 

Type of production: Handcrafted
Country of production: Orlando, Florida, USA
Blade: 440B stainless steel at 57/59HRC
Blade finish: satin
Handle: tubular, stainless steel, with through guard and brass screw cap 
Blade length: 142mm.
Blade thickness: 6mm.
Total length: 264mm.
Weight: 345g.
Sheath: brown oiled leather, with belt loop, front button pocket, and sharpening stone
Notes: previously purchased knife, withdrawn from private collection, in excellent condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Mechanically perfect, with obvious signs of wear on the blade finish that do not compromise its practical use in any way 
* Available on the market: Introduced in 2001, now out of production
* Sharpening: Resharpened several times, professionally resharpened before being offered for sale
* Marks on blade: Multiple superficial cosmetic marks
* Marks on handle: a few small marks due to use
* Box: None
* Sheath: None
* Manuals, Certificates, and Warranties: None
* Checked and Certified by our in-house lab

Intended use: EDC / Light Utility

Type of production: Industrial
Country of production: USA
Blade: CPM-154CM stainless steel
Blade finish: Burnished
Handle: Aluminum
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 200mm.
Weight: 82g.
Closure: Axis Lock (Crossbar Lock)
Clip: Removable and reversible, in burnished stainless steel
Packaging: -
Notes: discontinued model no longer available on the market - knife previously purchased and used, from a private collection - mechanically perfect with obvious signs of wear that do not compromise its practical use in any way.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Overall in good condition, shows some minor cosmetic marks on the heat treatment of the titanium handles, clip, and blade, which do not compromise its practical use in any way
* Available on the market: Out of production and no longer available on the market
* Sharpness: Factory sharp
* Marks on blade: Minor cosmetic marks due to carrying and use
* Marks on handle: Minor cosmetic marks due to wear and tear
* Box: Knife sold in a nylon bag with EOS logos and a titanium key to adjust the blade tension
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

EOS Prawn – The first friction folder by EOS
The Prawn marks EOS's debut in the world of friction folders, offering a compact and robust solution for everyday use. Featuring a flamed titanium handle and CPM-S35VN sintered steel blade, it combines robustness and exclusive design.

Although it does not have a blade lock, the adjustable washer system allows you to keep the blade in the open or closed position by adjusting the tension. Its compact size makes it ideal for carrying in your pocket, backpack, or tactical bag.

Intended use: Tactical/EDC/Collection

Production type: Midtech
Country of manufacture: USA
Blade: CPM S35VN steel
Blade treatment: Stonewashed
Handle: Flamed titanium
Blade length: 68mm.
Blade thickness: 4mm.
Closed length: 83mm.
Total length: 135mm.
Closed thickness: 12mm.
Weight: 93g.
Closure: Friction Folder (without blade lock)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Notes: knife from a private collection, previously purchased and used, equipped with its original nylon pouch with which it was sold and a small titanium key to be used to adjust the tension and fluidity of the blade opening

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used.
* Condition: Overall in very good condition, has a few small surface scratches on the blade from use.
* Commercially available: Available
* Sharpening: Factory.
* Marks on blade: Small surface scratches visible against the light
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sport/Utility

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN
Blade treatment: Satin finish
Handle: G10
Blade Length: 91mm.
Blade thickness: 3.8mm.
Total length: 223mm.
Weight: 202g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew Demko

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Like new, never used
* Commercially available: Limited and numbered custom edition, discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Not Present
* Checked and Certified by our in-house laboratory

Microtech Marfione Custom ANAX - Limited Series 2015
In 2015, Anthony Marfione created a limited and numbered series of the famous ANAX, a folding integral knife that marked a turning point in custom design. Winner of the “Most Innovative Knife of the Year” award at the 2014 Blade Show, the ANAX combines functionality, futuristic aesthetics, and top-of-the-line materials. The custom models produced that year stand out for their handcrafted finishes, unique material variations, and exclusive accessories, quickly becoming collector's items coveted on a global scale.

Data Sheet.
Intended Use: Tactical, EDC
Type of production: Custom
Country of Production: USA
Blade: Elmax Stainless Steel
Blade Finish: Tri-Tone Black DLC
Handle: Carbon fiber and titanium with Black DLC finish and hardware
Blade length: 95mm
Blade thickness: 4mm
Length closed: 125mm
Total length: 219mm
Thickness when closed: 12mm
Weight: 99g
Closure: Sub Frame Lock in titanium with Black DLC finish
Clip: Titanium with Black DLC finish
Packaging: Marfione Custom box with external serial number, nylon zippered pouch, microfiber pouch, titanium patch with Marfione logo
Notes: 05/2015 limited run custom edition, specimen number 075, numbered on blade and box

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Still available.
* Sharpening: Factory sharpened
* Marks on blade: A few small, unnoticeable marks.
* Marks on handle: None
* Box: Not present
* Scabbard: -
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Sporting

Production Type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr14, 58-59 HRC
Blade Finish: Titanium Nitriding
Handle: G10
Blade length: 98mm.
Blade thickness: 3.5mm.
Length closed: 137mm.
Total length: 235mm.
Thickness when closed: 18mm.
Weight: 167g.
Closure: Liner Lock with additional AUTO-LAWKS automated safety lock.
Clip: multi-position, removable and reversible, stainless steel with black paint finish
Packaging: not present
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: 2015 specimen, like new
* Commercially available: Still in production
* Sharpening: Factory sharpened
* Marks on blade: No
* Marks on handle: None
* Box: Absent
* Scabbard: Present
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: All Rounder Utility

Production type: Industrial
Country of Production: USA
Blade: 420HC stainless steel engraved
Blade finish: mirror polish
Handle: wood and brass
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 220mm.
Thickness when closed: 16mm.
Weight: 205g.
Closure: Back Lock
Sheath: nylon sheath
Packaging: not present
Notes: previously purchased knife from private collection

Buck 560BT Black Nitride XLTi Titanium is a collectible folding knife manufactured in the United States in 1993. This distinctive model combines high-quality materials with functional design, making it a sought-after piece by both collectors and knife enthusiasts.

This item comes from a private collection and is in excellent condition, featuring a flawless blade and a perfectly preserved handle. Supplied with its original packaging and leather sheath, it represents a rare opportunity for true Buck aficionados.

Type: Previously Purchased
Condition: Excellent
Availability: Discontinued since the late '90s
Sharpening: Factory edge
Blade marks: None
Handle marks: None
Packaging: Complete, original cardboard box with manufacturer logos
Sheath: Cordura
Manuals, Certificates and Warranties: Warranty certificates included
Inspected and Certified: By our in-house lab

Intended use: Collection
Production type: Industrial
Country of manufacture: USA
Blade: 425M stainless steel
Blade finish: Black nitride
Handle: Titanium with black nitride finish
Blade length: 95 mm
Blade thickness: Not specified
Closed length: 107 mm
Total length: 219 mm
Closed thickness: Not specified
Weight: Not specified
Locking mechanism: Lockback
Clip: Not present; supplied with original Buck nylon sheath
Packaging: Original Buck box
Notes: Limited edition 1993; titanium handle with black nitride finish; includes original Buck nylon sheath

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, from a private collection.
* Condition: in good condition
* Commercially available: discontinued and no longer available.
* Sharpening: Factory sharpened, improvable
* Marks on blade: Small marks near the edge, due to time and use.
* Marks on handle: Small marks from time and use - Hardware and clip show discoloration
* Box: Absent
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory.

MF stands for Medium Folder. This line of knives fits in between the Basic Folders series and the Heavy Folders series. The typical mechanism of the series is the LINER-LOCK. The overall structure is sturdy.

All knives in the MF series have a rear glass breaker. They also feature the innovation of the adjusting counterscrew at the blade attachment stud. By removing the counterscrew, the center pin can be tightened or loosened at will, so as to achieve the desired smoothness of opening. It will be sufficient to re-lock the pivot screw with the counterscrew to secure the adjustment.

The BC (Belt Cutter) version features the rear belt cutter with an easily available and replaceable industrial cutter blade. In addition, a slotted screwdriver is inserted inside the grip to allow adjustment and calibration of firearm optics. 

Intended Use: Tactical/Emergency

Production Type: Industrial
Country of manufacture: Italy
Blade: Stainless steel N690Co 58HRC
Blade Finish: Burnishing
Handle: Anticorodal 
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 134mm.
Total length: 225mm.
Thickness when closed: 24mm.
Weight: 162g.
Closure: Liner Lock with additional safety catch
Clip: burnished stainless steel, deep pocket, removable and reversible
Notes: belt cutter, glass breaker, optics screwdriver - previously purchased knife from a private collection

PREVIOUSLY PURCHASED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: knife previously purchased, withdrawn from a private collection.
* Condition: like new, never used
* Commercially available: discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Microfiber pouch.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Annually Benchmade releases a limited edition knife model under its Gold Class line. These Benchmade Gold Class knives are made from the finest materials and feature the highest level of workmanship. Each Benchmade Gold Class knife series is limited and numbered.

This particular Gold model, the 750-101, has Damasteel blade with Infinity pattern, bronze anodized monolock titanium handle with black carbon fiber inserts contoured and handcrafted, the titanium back spacer is also bronze anodized. All hardware components are finished with DLC (including the pocket clip). This Gold Class series is limited to 200 pieces.

Intended Use: Collection

Type of production: Semi-Industrial
Country of manufacture: USA
Blade: stainless Damasteel with Infinity design
Handle: bronze anodized titanium and carbon fiber
Blade length: 91mm.
Blade thickness: 3.18mm.
Length closed: 119mm.
Total length: 212mm.
Weight: 127g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: Black fabric pouch with Benchmade logos 
Packaging: “Gold Class” cardboard box with Benchmade logos - Rubberized steel case with magnetic closure - Warranty certificates with date and numbering
Notes: Limited Edition 2010, Knife number #133 out of #200 - each piece is numbered on the blade

Knife withdrawn from a private collection

• Origin: Withdrawn from a private owner, previously purchased and used
• Condition: Like new
• Availability: Discontinued
• Factory edge: Yes
• Blade marks: None
• Handle marks: None
• Box: Not included
• Sheath: Not included
• Manuals, Certificates, and Warranties: Not included
• Inspected and certified by our internal laboratory

One of our first ZT models and still one of the most popular, now offered in a limited edition with a CPM-MagnaCut steel blade.

The 0350 is a large and aggressive knife, yet compact and light enough to make it a practical and highly effective EDC. It features ZT's assisted opening system: the blade deploys quickly and easily, even with gloves, thanks to the ambidextrous flipper. The blade is finished with a bold and distinctive tiger-stripe pattern created with tungsten DLC coating.

Intended use: Tactical / Military

• Production type: Industrial
• Country of origin: USA
• Blade material: CPM-MagnaCut steel
• Blade finish: Tungsten DLC Coating
• Handle: G-10
• Blade length: 90mm
• Blade thickness: 3mm
• Closed length: 115mm
• Overall length: 195mm
• Closed thickness: 13mm
• Weight: 162g
• Locking mechanism: Liner Lock
• Clip: Removable, multi-position, stainless steel
• Packaging: Not included
• Notes: Sprint Run edition with CPM-MagnaCut steel - Design by Mick Strider and Ken Onion - SpeedSafe opening system

KNIFE RETRIEVED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private owner, previously purchased
* Condition: Like new, never taken out of its box
* Market Availability: Hard to find
* Factory Edge: Yes
* Blade Marks: None
* Handle Marks: None
* Box: Original, with logos and accessories
* Sheath: Included
* Manuals, Certificates & Warranty: Complete set included
* Inspected and Certified by our internal laboratory

The Halfbreed Blades HBBLBK01OD is a high-end tactical knife designed to withstand the most extreme conditions. Built with a solid full-tang blade made of Böhler K110 steel, it provides excellent wear resistance and outstanding cutting performance. The 146 mm blade is coated with OD Green Teflon (PTFE), reducing friction and protecting the steel from corrosion.

The handle, made of black G10, ensures a secure grip in any situation, while the crusher pommel with an integrated fire starter adds extra functionality for survival scenarios. The design also features a lanyard hole and a bow drill system on both sides of the handle, making it ideal for survival use.

Supplied with a Kydex MOLLE-compatible sheath, the Halfbreed Blades HBBLBK01OD is perfect for tactical operators, military personnel, and outdoor enthusiasts looking for an indestructible and high-performance knife. Made in Australia, this tool embodies reliability and uncompromising toughness.

Technical Specifications
Intended Use: Tactical, Survival, Military
Production Type: Industrial
Country of Manufacture: Australia
Blade: Böhler K110 Steel
Blade Finish: PTFE (OD Green Teflon)
Handle: Black G10
Blade Length: 146 mm
Blade Thickness: 6.5 mm
Total Length: 286 mm
Weight: 541 g
Locking Mechanism: Full-Tang (Fixed Blade)
Clip: -
Packaging: Halfbreed Blades Box + Kydex MOLLE-compatible Sheath
Notes: Lanyard hole, Crusher pommel with fire starter, Bow drill on both sides of the handle

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new
* Commercially available: In production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: lacking clear plastic pouch, TOPS products do not have box
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.

The Sonoran Desert covers nearly 260,000 square kilometers between the southwestern United States and northwestern Mexico. For someone like Dave who spends more time off-grid in this region than in places with modern conveniences, it is clear that his experience in the field ensures the quality of this knife. The Sonoran is designed to excel and meet virtually any challenge in extreme environments such as this.

Dave, known as “Desert Dave,” is a legendary figure: his expertise in primitive skills makes him one of the nation's leading experts in Stone Age survival techniques. Not surprisingly, he has added the role of Knife Designer to his already impressive resume. The Sonoran represents his idea of the ideal knife: a perfect balance of functionality and tradition.

With lines inspired by the classic Puukko, but with a slightly raised tip and an ergonomically designed, modern handle, the Sonoran combines traditional aesthetics with contemporary practicality. This knife is not just a tool: it is a reliable companion for those who live adventure and face nature with courage.

Intended Use: Allrounder Light Utility

Production Type: Semi-Industrial
Country of Production: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Tumble Finish
Handle: G10
Blade Length: 95mm.
Blade thickness: 4mm.
Total length: 190mm.
Weight: 95g.
Sheath: leather, belt
Packaging: -
Notes: previously purchased knife, from a private collection, like new

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: USA
Blade: CPM-3V steel
Blade Finish: Gray Coated
Handle: Grivory
Blade length: 86mm.
Blade thickness: 2.3mm.
Length closed: 119mm.
Total length: 205mm.
Thickness when closed: 10.4mm.
Weight: 58.4g.
Locking system: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, never used
* Commercially available: Findable.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.

The CL1 Cleaver was born from Expat's extensive international culinary experience, both in the kitchen and in the wilderness. If you're looking for a versatile tool to use in the camp kitchen that can also do double duty as a wood splitter or clean up a camp area, then the Expat Cleaver should be at the top of your wish list..

“Expat” is a real person. An instructor, adventurer, world traveler and many other things mixed together. While working in some of the most dangerous areas of South America, Expat contacted ESEE seeking jungle survival training in extreme scenarios. Thus began a close partnership that has now lasted for more than 15 years.

Expat has traveled thousands of miles around the Third World, sometimes with the ESEE team, but always with ESEE products. From armored caravans in Colombia and expeditions to the Himalayas, to earthquakes in El Salvador and hunting in the Balkans, ESEE knives have been a constant companion. He has been a student, translator and instructor for Randall's Adventure Training. During his time abroad, he developed unique insights into tools and adventures and is currently working with ESEE to bring these designs and experiences to others.

What started with a knife cleaver will end up ... well, who knows? That is the whole purpose of the Expat Experience.

Intended Use: Outdoor Utility / Heavy Duty / Field Kitchen

Production Type: Industrial
Country of Manufacture: USA
Blade: full tang in 1095 55/57HRC steel
Blade Finish: Stone Washed Black Oxide
Handle: G10
Blade Length: 141mm.
Blade thickness: 4.8mm.
Total length: 295mm.
Weight: 740g.
Sheath: leather blade cover, without belt or carry attachments or hooks
Packaging: cardboard box with ESEE logos.
Notes: previously purchased item, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Type of production: industrial
Blade: stainless steel ZDP-189
Blade finish: Satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Weight: 104g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: previously purchased knife, from private collection

• Origin: Acquired from a private owner, previously purchased
• Condition: Overall in excellent condition
• Available on the market: NO
• Sharpening: Factory edge
• Blade marks: None
• Handle marks: None
• Box: Not included
• Sheath: /
• Manuals, Certificates, and Warranties: /
• Checked and Certified: By our in-house laboratory

The Spyderco Meerkat C64JPBG is a compact and versatile folding knife, ideal for those seeking a reliable and discreet tool for everyday use. This model, part of a limited production run (Sprint Run) from 2009-2010, stands out for its exclusive Phantom Lock™ mechanism and VG-10 steel blade, renowned for its excellent balance of edge retention and corrosion resistance. The blue/gray FRN (fiberglass reinforced nylon) handle ensures a secure and comfortable grip, while the ambidextrous clip allows for discreet and practical carrying. With a total length of 151 mm and a weight of just 70 g, the Meerkat combines portability and functionality, making it a valuable addition for collectors and knife enthusiasts.

• Intended Use: Everyday use, collection
• Production Type: Industrial (Sprint Run)
• Country of Manufacture: Japan
• Blade: VG-10 stainless steel
• Blade Finish: Satin
• Handle: Blue/gray FRN
• Blade Length: 51 mm
• Blade Thickness: 2.5 mm
• Closed Length: 100 mm
• Total Length: 151 mm
• Closed Thickness: 12 mm
• Weight: 70 g
• Lock: Phantom Lock™
• Clip: Ambidextrous, tip-down, stainless steel
• Packaging: Original Spyderco box
• Notes: Limited Sprint Run edition from 2009-2010, featuring the exclusive Phantom Lock™ mechanism.

Origin: Taken from a private collection, previously purchased
Condition: Overall in excellent condition
Commercial Availability: NO
Edge: Factory edge
Blade Marks: Small scratches
Handle Marks: Clip slightly scratched
Box: Absent
Sheath: /
Manuals, Certificates, and Warranties: /
Inspected and Certified: by our in-house laboratory

The Spyderco Rescue Wave C14SGYW is a professional folding knife designed to meet the needs of rescuers and emergency operators. Featuring a practical and safe design, it combines excellent craftsmanship and technological innovation to ensure top performance even in the most challenging situations. The VG-10 Japanese steel blade, with a sheepfoot profile and fully serrated edge, is designed to effectively handle tough materials like seat belts, ropes, and fabrics. The unique Emerson "Wave" opening system enables quick and intuitive deployment directly from the pocket, speeding up operations in critical moments. The gray FRN (Fiberglass Reinforced Nylon) handle provides a comfortable and secure grip even in extreme conditions, while the back-lock mechanism adds extra safety during use. Compact, lightweight, and functional, the Rescue Wave is a benchmark tool for those seeking reliability and practicality in a single instrument.

Product Details
Intended Use: Rescue, EDC (Everyday Carry)
Production Type: Industrial
Country of Origin: Japan
Blade: VG-10 stainless steel
Blade Finish: Satin
Handle: Gray FRN (Fiberglass Reinforced Nylon)
Blade Length: 93 mm
Blade Thickness: 3 mm
Closed Length: 117 mm
Total Length: 210 mm
Closed Thickness: 12 mm
Weight: 105 g
Lock Mechanism: Back-lock
Clip: Stainless steel, reversible, four-position
Packaging: -
Notes: Equipped with Emerson's "Wave" opening system for quick blade deployment

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously Purchased
* Condition: in good condition
* Commercially available: unique specimen
* Sharpening: original
* Marks on blade: some small oxidation marks (see photo)
* Marks on handle: /
* Packaging: /
* Scabbard: handmade, leather
* Manuals, Certificates and Warranties: Yes
* Checked and certified by our in-house laboratory
 
Gabriele Sammatrice/Sicilian Forge Custom Knives is a skilled craftsman who offers blades with character, strength and cutting edges of the highest level. He often uses A8 Modified tool steel: a very strong alloy steel. The most common use of this alloy is in striking blades. It has extreme toughness with good edge retention. The 8.5% chromium makes it almost stainless.

A8-mod is a modified version of AISI A8. It is a tool steel with a medium carbon content and alloyed with chromium, molybdenum and vanadium. This steel is an improvement on A8 steel, with good hardenability, toughness and dimensional stability to heat treatment.

Intended use: hunting/collecting
 
Type of production: artisan
Country of production: Italy
Blade: carbon steel A8 Mod.
Blade finish: satin-finished
Handle: maple wood
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 260mm.
Weight: 294g - 504g including scabbard
Scabbard: handmade, leather
Packaging: /
Notes: previously purchased knife from a private collection
 

Type: Previously purchased knife, from a private collection
Condition: Like new, never used
Commercial Availability: Discontinued
Edge: Factory edge
Blade Marks: None
Handle Marks: None
Box: Present
Sheath: -
Manuals, Certificates, and Warranties: Present
Inspected and Certified by our internal laboratory

Intended Use: Collection/Tactical
Type of Production: Semi-Industrial
Blade Production: USA
Blade: Stainless steel Damascus by Damasteel with Odin Heim pattern
Blade Treatment: -
Handle: Red and black carbon fiber with red anodized aluminum spacers
Blade Length: 90mm
Blade Thickness: 3.15mm
Closed Length: 119mm
Total Length: 210mm
Closed Thickness: -
Balance: -
Weight: 135g
Lock: Axis Lock
Clip: Removable and reversible, stainless steel
Sheath: Black fabric pouch with golden Benchmade logos
Packaging: "Gold Class" cardboard box with Benchmade logos - Rubber-coated steel case with magnetic closure
Notes: Limited Edition 2016, each piece is numbered on the blade

PREVIOUSLY PURCHASED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new, never used, never removed from its packaging, and never inserted in the sheath
* Availability: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present
* Sheath: Present, with an additional new leather sheath
* Manuals, Certificates, and Warranties: Present
* Inspected and Certified by our internal laboratory

The Bark River Aurora II is designed as the ultimate bushcraft knife, a result of extensive testing conducted by experts in North America and Europe. This outdoor knife, perfected through feedback received, is notable for its balance and versatility. The blade, made of CPM 3V steel, is renowned for its exceptional strength and its ability to retain an excellent edge over time. However, it is important to watch for moisture and acids, as CPM 3V is not completely stainless. Cleaning the knife after use and occasionally applying oil is recommended to ensure its longevity.

The Aurora II, significantly larger than the standard model, features a pointed tip ideal for detailed tasks and a spine suited for use with a fire starter. These characteristics make it an indispensable tool for outdoor activities.

The handle is made of desert ironwood, a hardwood appreciated for its color and unique pattern, giving the knife a luxurious look and improving grip. Each piece is handmade by Bark River, meaning that every knife is unique and may have slight variations compared to the images.

Intended Use: Hiking / Utility / Bushcraft

Country of Manufacture: USA
Blade: Full tang in CPM-3V carbon steel at 61 HRC
Handle: Desert ironwood
Blade Length: 140mm.
Blade Thickness: 3.85mm.
Total Length: 264mm.
Weight: 195g.
Sheath: Leather, with an additional leather sheath
Notes: Knife from a private collection, like new, never removed from its packaging and never inserted in the sheath, provided with an additional sheath, out of production and no longer available on the market

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collector, previously purchased
* Condition: Overall in excellent condition
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None (the visible stains in the photo are oil on the blade)
* Handle marks: None
* Box: Not available
* Sheath: Present, in Nylon
* Manuals, Certificates, and Warranties: Not available
* Checked and Certified by our internal laboratory

The MARK I is an innovative tactical/military knife, designed by Duane Dieter, produced in the late '90s and has immediately become an icon in the knife-making world.

Master of Defense, an eclectic American brand that is no longer active and was later acquired by Blackhawk! Blades, produced various folding and fixed tactical and military knives, all created in collaboration with well-known knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson, and Casillas.

Intended use: Tactical / Collection
Type of production: Industrial
Country of production: USA
Blade: 154CM stainless steel with titanium nitride coating
Handle: Aerospace-grade aluminum with non-slip inserts - seatbelt cutter and skull-crusher
Blade length: 95mm.
Blade thickness: 3.5mm.
Total length: 247mm.
Weight: 122g.
Lock: Button Lock with additional safety system
Clip: Removable and reversible, in stainless steel
Sheath: Belt nylon sheath
Packaging: No packaging

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A few imperceptible marks due to time.
* Marks on handle: None
* Box: Present
* Scabbard: Present, with a few small marks due to time.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Hunting / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel rolled 3G (SGPS) 62HRC
Blade Finish: Satin finish
Handle: Micarta Brown
Blade Length: 90mm.
Blade thickness: 4.5mm.
Total Length: 195mm.
Weight: 180g.
Sheath: Brown Leather
Packaging: cardboard box with Fallkniven logos
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its packaging.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Sporting

Production Type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 61/62HRC
Blade Treatment: Stone Washed
Handle: Titanium folders and G-10 grips
Blade length: 94mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 206mm.
Thickness when closed: 15mm.
Weight: 132g.
Closure: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box with Fantoni logos
Notes: Limited and numbered edition made of only 100 pieces - Opening via Carson Flipper system - Design by William W. Harsey

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present, complete kit
* Scabbard: Present, leather.
* Manuals, Certificates and Warranties: Present, complete kit
* Checked and Certified by our in-house laboratory

The Sebenza 25 is one of the most iconic and respected folding knives in the modern cutlery world, created by Chris Reeve, an artisan of South African descent who later moved to the United States. The term “Sebenza” comes from the Zulu word for “work,” a name that reflects the practicality and functionality of this tool.

Intended use: collectible/sporting

Type of production: midtech
Country of manufacture: USA
Blade: stainless steel CPM-S35VN 58/59HRC
Handle: titanium with micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 210mm.
Thickness when closed: 17mm.
Weight: 134g.
Closure: Reeve Integral Lock (Frame Lock)
Clip: removable, titanium
Package: white cardboard box with Chris Reeve logos, leather cover, microfiber cloth, warranty certificates 

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present, complete kit
* Scabbard: -
* Manuals, Certificates and Warranties: Present, complete kit
* Checked and Certified by our in-house laboratory

The Sebenza 21 is one of the most iconic and respected folding knives in the modern cutlery world, created by Chris Reeve, an artisan of South African descent who later moved to the United States. The term “Sebenza” comes from the Zulu word for “work,” a name that reflects the practicality and functionality of this tool.

Intended use: collectible/sporting

Type of production: midtech
Country of manufacture: USA
Blade: stainless steel CPM-S35VN 58/59HRC
Handle: titanium
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 210mm.
Thickness when closed: 17mm.
Weight: 134g.
Closure: Reeve Integral Lock (Frame Lock)
Clip: removable, titanium
Package: white cardboard box with Chris Reeve logos, microfiber cloth, warranty certificates

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, sheath shows signs of time and has poor retention of the knife
* Commercially available: Discontinued and company no longer in operation.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Scabbard: Present, with signs of time and poor knife retention.
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Collection

Type of production: industrial
Country of manufacture: Italy
Blade: full tang, stainless steel CPM-S35VN at 61/62HRC
Blade finish: Stonewashed
Handle: G10, handcrafted
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 200mm.
Balance: set back 2cm. from the lower guard branch
Weight: 124g.
Sheath: leather, with vertical belt loop
Packaging: absent
Notes: Design by W. Harsey - knife previously purchased, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, the sheath and box show some minor signs of time
* Commercially available: Discontinued and company no longer operating
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present, with some signs of time
* Scabbard: Present, with some signs of time.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Collection

Type of production: industrial
Country of manufacture: Italy
Blade: full tang, stainless steel CPM-S35VN at 61/62HRC
Blade finish: Stonewashed
Handle: G10
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 200mm.
Balance: set back 2cm. from the lower guard branch
Weight: 124g.
Sheath: leather, with vertical belt loop
Packaging: cardboard box with Fantoni logos, warranty certificate with technical specifications
Notes: Design by W. Harsey - knife previously purchased, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Still in catalog.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Partially present (not complete, but accessories present)
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / EDC

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/60HRC 
Blade Treatment: PVD Stonewashed
Handle: Titanium “Old Black”
Blade length: 83mm.
Blade thickness: 4mm.
Total length: 201mm.
Weight: 118g.
Closure: Frame Lock 
Clip: removable and reversible, made of titanium
Packaging: Partially present - not complete, but accessories present
Notes: Previously purchased knife, from private collection - Carson Flipper opening system on ball bearings

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Still in catalog.
* Sharpening: Factory sharpened, but improvable
* Marks on blade: None
* Marks on handle: None
* Box: Partially present (not complete, but accessories present)
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / EDC

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/60HRC 
Blade Treatment: Satin
Handle: Titanium
Blade length: 83mm.
Blade thickness: 4mm.
Total length: 201mm.
Weight: 118g.
Closure: Frame Lock 
Clip: removable and reversible, made of titanium
Packaging: Partially present - not complete, but accessories present
Notes: Previously purchased knife, from private collection - Carson Flipper opening system on ball bearings

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Conditions: Overall in excellent condition
* Commercially available: YES
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: Yes original
* Manuals, Certificates and Guarantees: /
* Checked and Certified by our internal laboratory

Type of production: Industrial

Country of production: Italy (Maniago)
Blade: full tang, in M390 stainless steel 60/61HRC
Blade treatment: Satin
Handle: G10
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 205mm.
Weight: 180g.
Sheath: leather, made in Italy
Packaging: Cardboard box with Lion Steel logos
Notes: Design by Molletta

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened, but improvable
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S35VN
Blade finish: Stonewashed
Handle: Titanium and custom G10 coyote handle, with red spacer
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 206mm.
Thickness when closed: 14mm.
Weight: 173g.
Closure: Frame Lock
Clip: Removable, stainless steel
Packaging: Absent
Notes: Design by Rick Hinderer - Knife previously purchased, withdrawn from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Excellent condition, no marks or defects.
* Commercially available: Still in catalog.
* Sharpening: Factory sharpened, but improvable
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: Manual present.
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S30V Powder Steel
Blade treatment: Stonewashed
Handle: G10 with stainless steel liners
Blade Length: 91mm.
Blade thickness: 3.8mm.
Length closed: 119mm.
Total length: 210mm.
Weight: 147g.
Closure: Compression Lock
Clip: stainless steel
Packaging: absent; only manual present
Notes: Previously purchased knife from a private collection - Model taking inspiration from the Native, with dimensions increased by about 20 percent

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, minor marks on clip and hardware.
* Commercially available: Discontinued
* Sharpening: Factory sharpened, can be improved.
* Marks on blade: None
* Marks on handle: Small marks on clip and hardware.
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: / /
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Sporting

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel S35VN
Blade finish: Satin finish
Handle: G10 and Titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Total length: 216mm.
Thickness when closed: 13mm.
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Packaging: not present
Notes: previously purchased knife from a private collection - made in collaboration with Emerson Knives - Patented Wave opening system

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION

* Origin: Withdrawn from a private individual, previously purchased
* Condition: like new
* Commercially available: no longer in production
* Sharpening: original
* Marks on blade: -
* Marks on handle: -
* Box: NO
* Sheath: NO
* Manuals, Certificates and Guarantees: NO
* Checked and Certified by our internal laboratory

Intended use: Tactical/Military

Type of production: Industrial
Blade production: USA
Blade: CTS204P stainless steel
Blade treatment: -
Handle: Carbon Fiber and Titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Total length: 216mm.
Thickness when closed: 13mm.
Balance: -
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, in stainless steel
Sheath: -
Packaging: cardboard box with Zero Tolerance logos
Notes: in collaboration with Emerson Knives - Patented Wave opening system

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Condition: in excellent condition
* Commercially available: unique handcrafted piece
* Sharpening: original
* Marks on blade: small marks
* Marks on handle: None
* Box: /
* Sheath: -
* Manuals, Certificates and Guarantees: No
* Checked and Certified by our internal laboratory

Alain Descy is a renowned Belgian craftsman specializing in the creation of high-quality knives, known for combining functionality, aesthetics and craftsmanship. Descy works with fine materials such as steel and wood to create durable knives with a refined design.

The Bonvent model, shown here, embodies the best of her style: a sturdy blade in satin-finished steel, engraved with Descy's signature, and a bone handle, which provides elegance and an ergonomic grip. This folding knife is lightweight, versatile and ideal for everyday use or for collectors.

Another distinctive feature is the patented locking system, which is based on a pin positioned on the top of the handle, which offers security without compromising the compactness of the design.

The Bonvent perfectly combines traditional design and modernity, representing a balance between practicality and beauty, all handcrafted with exceptional attention to detail.

Intended use: Collection / Sports

Type of production: artisanal
Country of production: France
Blade: D2 steel
Blade finish: satin finish
Handle: stainless steel and bone
Blade length: 95mm.
Blade thickness: 3.5mm.
Total length: 226mm.
Weight: 168g.
Closure: dorsal lock (patented)
Clip: not present
Sheath: leather, with belt loop
Notes: Knife from a private collection in excellent condition

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Condition: USED
* Commercially available: available
* Sharpening: resharpened by our internal laboratory
* Signs on the blade: has scratches on the tip of the blade (visible in the photos)
* Signs on the handle: small signs
* Box: YES
* Sheath: NO
* Manuals, Certificates and Guarantees: Yes
* Checked and Certified by our internal laboratory

ROK, which is part of the SOLID knives family obtained from a single piece of aluminum or titanium, has two important innovations:

* the introduction of the new H.WAYL System; this is a LionSteel patent that allows the clip to disappear inside the handle during use of the knife. The clip can only appear when needed.

* the introduction of NFC technology in the knife box. With this system, the user no longer has to search for product information, but the knife itself makes it available: maintenance instructions, in-depth information on the production process, or more general information on LionSteel.

As was already the case for the TRE model, the user has the option of removing the flipper, thus opting for a more traditional two-handed blade opening. The ROK also features the Rotoblock safety system and a steel tip on the end of the blade lock bar: this prevents possible breakages or wear caused by the blade itself.

Intended use: Sport / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 59/60HRC

Blade treatment: Black PVD
Handle: Aluminum
Blade length: 86mm.
Blade thickness: 4.5mm.
Total length: 198mm.
Thickness when closed: -mm.
Weight: 130g.
Closure: Frame Lock with steel striker and Rotoblock safety system
Clip: concealed, machined from solid
Packaging: cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings - possibility of removing the flipper system guard

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Conditions: in like-new condition
* Available on the market: No longer available
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: /
* Manuals, Certificates and Guarantees: Yes
* Checked and Certified by our internal laboratory

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: handcrafted blade and handle

Country of production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: titanium folders with handle in micarta
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 213mm.
Closed thickness: 17mm.
Balance: -
Weight: 150g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Used for hunting and resharpened, with some small marks given by previous sharpening.
* Commercially available unique specimen from 2010.
* Sharpening: Re-sharpened, can be improved.
* Marks on blade: Small marks from previous regrinding.
* Marks on handle: Small marks from previous regrinding.
* Packaging: /
* Scabbard: Leather, handcrafted, in good condition, with some minor signs of wear and tear.
* Manuals, Certificates and Warranties: Certificate of Authenticity.
* Checked and Certified by our in-house laboratory

FRANCO VERNAZZA is a hobbyist knifemaker and by passion a member of A.C.H.I. (Associazione Coltellinai Hobbisti Italiani), this does not take away from his excellent knifemaking skills. He himself says he makes blades for passion, knives that do the job of cutting, everything else is a detail. The workmanship, all unique because he doesn't use jigs, is really good, completely Hand Made in Italy. 

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: integral, 440C stainless steel, entirely hand and file machined
Blade finish: mirror polish
Handle: 440C stainless steel
Blade length: 95mm.
Blade thickness: 5mm.
Total length: 202mm.
Weight: 107g.
Sheath: leather, handcrafted, hand-stitched
Packaging: /
Notes: previously purchased and used knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Very Good
* Commercially available No.
* Sharpening: Factory.
* Marks on blade: A few small marks
* Marks on handle: A few small marks on the guard branch.
* Packaging: /
* Scabbard: Leather, handcrafted, in good condition.
* Manuals, Certificates and Warranties: Certificate of Authenticity.
* Checked and Certified by our in-house laboratory

Knife handcrafted by Master C.IC. (Italian Knifemakers Guild) Angelo Scotti. A classic sporting model hunting use that recalls the typical styles of Loveless.

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: full tang, RWL stainless steel hardened to 60 HRC
Blade finish: satin-finished
Handle: Ebony wood and stainless steel guard
Blade length: 95mm.
Blade thickness: 3mm.
Total length: 207mm.
Weight: 147g.
Sheath: handcrafted, leather, hand-stitched
Packaging: /
Notes: previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: In very good condition
* Commercially available: unique specimen
* Sharpening: Original
* Marks on blade: /
* Marks on handle: A few small marks on the nickel silver guard.
* Packaging: /
* Scabbard: handcrafted, crocodile leather, hand-stitched.
* Manuals, Certificates and Warranties: / /
* Checked and Certified by our in-house laboratory

Renato Cassol, an expert hunter and well-known cutler in the province of Biella, is famous for his handcrafted knives. Using fine materials and traditional techniques, Cassol creates knives valued for quality, aesthetics and functionality, embodying the tradition of Italian cutlery making.

Intended use: hunting / collection

Type of production: artisan
Country of production: Italy
Blade: stainless damasteel steel 59/60 HRC
Blade finish: /
Handle: Warthog tooth and amboine burl, with nickel silver guard
Blade length: 98mm.
Blade thickness: 4mm.
Total length: 202mm.
Weight: 109g.
Sheath: handcrafted, hand-stitched, in fine Crocodile leather
Packaging: /
Notes: previously purchased knife, from a private collection

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: no longer available
* Sharpness: Factory
* Marks on blade: -
* Marks on handle: -
* Box: Present
* Sheath: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our internal laboratory

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 440C 58HRC stainless steel
Grip: G10
Blade length: 88mm.
Blade thickness: 4mm.
Closed length: 130mm.
Total length: 220mm.
Weight: 134g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Stedemon Knife Co. logos.
Notes: opening via Carson Flipper system - movement on ball bearings

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: still in production.
* Sharpening: Professionally re-sharpened.
* Marks on blade: None
* Marks on handle: a few small marks on clip, hardware, and aluminum spacer
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: Tactical

Production type: Industrial
Country of Production: Italy
Blade: N690Co 58HRC steel with Grade 5 titanium back (49-50HRC)
Blade finish: stonewashed
Handle: G10
Blade length: 91mm.
Blade thickness: 5mm.
Length closed 127mm.
Total length: 216mm.
Thickness when closed: 25mm.
Balance: Backward, 3cm from the top of the guard.
Weight: 186g.
Latch: Liner Lock, with manual insertion safety
Clip: Stainless steel, reversible
Notes: previously purchased knife, withdrawn from private collection