Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows some barely noticeable signs of aging on the Zytel handle and a couple of small spots of oxidation on the tip of the blade (right side), which in no way compromise its practical use
* Commercially available: Discontinued
* Sharpness: Factory-sharpened; could be improved
* Marks on blade: A couple of small spots of oxidation on the tip of the blade, on the right side, which in no way compromise its practical use
* Marks on handle: A few barely noticeable signs of aging
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

Intended use: sports / collectible

Production type: Industrial
Country of manufacture: Japan
Blade: VG-10 stainless steel
Blade finish: Satin
Handle: Zytel, with stainless steel liners
Blade length: 90 mm.
Blade thickness: 4 mm.
Closed length: 120 mm.
Overall length: 210 mm.
Thickness when closed: 20 mm.
Weight: 135 g.
Closure: Arc-Lock (crossbar lock)
Clip: removable, stainless steel
Packaging: -
Notes: Previously purchased knife, from a private collection

PREVIOUSLY PURCHASED AND USED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased and used
* Condition: Good overall condition, with evident signs of age and use
* Commercial availability: Discontinued
* Sharpening: Resharpened
* Marks on blade: Present, with scratches, abrasions and surface dulling consistent with age and use
* Marks on handle: Present, with natural patina and signs of use on the stacked leather washers
* Box: -
* Sheath: Present, original leather sheath, heavily used and showing signs of age
* Manuals, Certificates and Warranties: -
* Inspected and Certified by our in-house laboratory

The SOG S1 Bowie Vietnam 5th Special Forces Group is one of the most representative knives in the history of SOG Specialty Knives and the model with which the American brand began its production during the second half of the 1980s. Made in Seki, Japan, the S1 was created as a tribute to the famous knives used by members of the Military Assistance Command, Vietnam – Studies and Observations Group (MACV-SOG) during the Vietnam War.

It is important to distinguish the S1 from the original “sterile” military knives actually used operationally during the conflict: the commercial SOG model instead reproduces the commemorative configuration of the famous MACV-SOG Bowie, featuring the U.S. Army Special Forces crest on the blade together with the marking “VIETNAM 5th SPECIAL FORCES GROUP”. This strong historical identity, combined with the quality of Japanese manufacturing, has made it one of the most recognizable and sought-after vintage SOG knives among collectors.

Production was entrusted to Ichiro Hattori in Seki, one of the most important names in Japanese knifemaking. The substantial Bowie blade is made from SK-5 carbon steel, hardened to approximately 57-58 HRC, with the characteristic dark gun-blue finish combined with polished surfaces. The handle uses traditional stacked leather washers stabilized with epoxy resin, completed by a sturdy metal guard and pommel.

This example features the classic SOG Specialty Knives logo on one side of the ricasso and, on the opposite side, the markings “SEKI-JAPAN”, the Special Forces crest and the inscription “VIETNAM 5th SPECIAL FORCES GROUP”. It is also accompanied by its original black leather sheath, complete with sharpening stone pocket and a large Special Forces crest embossed on the lower section. The original period identification label is still present on the back of the sheath.

The example offered here comes from a private collection and has actually been used. The blade shows scratches, abrasions and surface marks, both on the blued and polished areas; the leather handle has developed a noticeable patina and shows wear consistent with its age. The original sheath is also heavily used, with leather wear, marks and widespread abrasions. Its condition should therefore be considered good in relation to its age and nature, but it should not be compared with a display-grade or NOS example.

These very characteristics tell the story of an authentic SOG S1 made in Seki: a knife that, regardless of its cosmetic condition, retains all the appeal of one of the founding models of the brand and today represents a particularly significant piece for a collection dedicated to American military knives and Japanese SOG production from the 1980s and 1990s.

Intended use: Military / Collection
Production type: Industrial
Model: S1 Bowie - Vietnam 5th Special Forces Group
Country of manufacture: Seki - Japan
Model production period: 1986 - 2005
Blade: SK-5 carbon steel
Hardness: 57-58 HRC
Blade finish: Gun-blue / polished
Blade profile: Bowie
Edge: Plain
Handle: Stacked leather washers stabilized with epoxy resin
Guard and pommel: Metal
Blade length: Approx. 159mm
Blade thickness: Approx. 7.1mm
Overall length: Approx. 273mm
Weight: Approx. 349g
Sheath: Original black leather sheath with sharpening stone pocket and Special Forces crest
Notes: Previously purchased and used knife, from a private collection

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private seller, previously purchased
* Condition: Overall in excellent condition
* Commercially available: Discontinued
* Sharpening: Professionally resharpened
* Marks on blade: None
* Marks on handle: Minor signs of wear on the carbon fiber scales, visible mainly against the light
* Box: Included
* Sheath: Included
* Manuals, Certificates, and Warranties: Included
* Inspected and certified by our in-house laboratory

Intended use: sports / collection

Production type: industrial
Country of manufacture: Seki - Japan
Blade: ZDP-189 stainless steel, 67 HRC
Blade finish: Satin
Handle: Carbon fiber with stainless steel liners
Blade length: 70 mm.
Blade thickness: 2.5mm.
Closed length: 93mm.
Total length: 157mm.
Weight: 55g.
Closure: Liner Lock
Clip: Stainless steel, removable
Notes: Designed by Michael Walker - Sprint Run edition available only in 2010 - Withdrawn from a private collection, complete with box and manuals

Notes on the Designer

Michael Walker is to the knife industry what Michael Jordan is to basketball or Wayne Gretzky is to hockey. He shattered established standards, venturing into uncharted territory and elevating the art of knife-making to new heights of innovation and modernity.

In 1980, the folding knife industry had few locking innovations, and only the traditional Back Lock existed. In 1981, Walker invented, developed, and ultimately trademarked the Michael Walker LinerLock®, adding a leaf spring that locked the blade open, making it a true one-handed folding knife. He also included a latch to keep the blade closed by utilizing the force of the internal leaf spring, preventing it from opening in the user’s pocket.

This innovation paved the way for modern cutlery, enabling numerous new designs and future developments leading up to today’s SubFrame Lock, Frame Lock, Flipper Folder, and ball-bearing-equipped IKBS opening systems.

Other inventions include the “Lake and Walker Safety System” (LAWKS), BLADELock, Ball Bearing Lock, and Tough Lock.

Some of the manufacturers he has collaborated with include Spyderco, Columbia River Knife and Tool, Schrade, Böker, and Klotzli.

Walker’s knives and designs have inspired many other custom knife makers, notably Bob Terzuola and Ernest Emerson. Terzuola credits Walker with teaching him how to make a liner-lock folder, and Emerson has stated that seeing one of Walker’s knives at a gun show inspired him to become a knifemaker.

Walker’s knives can be found at the Artifex Gallery in Taos and in the most prestigious collections around the world.

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Like new
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, could be improved
* Marks on blade: None
* Marks on handle: None
* Box: Included
* Sheath: Included
* Manuals, Certificates, and Warranties: Included
* Inspected and Certified by our in-house laboratory

The SOG Forge FG01-L is a knife of extraordinary beauty and build quality, combining Japanese craftsmanship with modern production techniques.

The blade, forged using a hammering technique, features a unique texture that is one-of-a-kind for each piece. It is made of San Mai steel, with a VG-10 cutting edge and 420J2 outer layers, a combination that ensures an excellent balance between sharpness, edge retention, and durability.

The glass-reinforced nylon (GRN) handle is designed with perfectly contoured inserts to provide optimal balance and a secure, comfortable grip. The knife is complemented by an elegant premium leather sheath, enhanced with a colored fabric insert and a button closure.

Manufactured in Japan, the SOG Forge FG01-L evokes an era when honor and master craftsmanship were fundamental values. An object that is not merely a tool, but a true collector’s item destined to stand the test of time and be passed down from generation to generation.

Intended Use: Collectible / Sport

Production Type: Industrial
Country of Origin: Seki - Japan
Blade: SanMai laminated stainless steel with a VG-10 cutting edge and 420J2 outer layers, featuring a concave grind
Blade Finish: Hammered and Brut de Forge with a satin-finished portion of the cutting edge
Handle: Three-dimensionally shaped GRN (Glass Reinforced Nylon)
Blade Length: 160mm.
Blade thickness: 5 mm.
Overall length: 275 mm.
Weight: 290 g.
Sheath: Leather, with an insert of fine Japanese fabric, which varies from sheath to sheath
Packaging: Cardboard box with SOG logos
Notes: Knife from a private collection, previously purchased

PREVIOUSLY PURCHASED KNIFE, FROM PRIVATE COLLECTION
* Provenance: Withdrawn from a private individual, previously purchased and used
* Condition: Good aesthetic condition and excellent mechanical condition
* Available on the market: Discontinued with this steel
* Sharpening: Professionally resharpened
* Marks on blade: Small aesthetic marks that do not compromise its functionality
* Handle marks: None, no clips
* Box: -
* Sheath: -
* Manuals, Certificates and Guarantees: -
* Controlled and Certified by our in-house laboratory

Intended use: Sporty/Sub

Country of production: Japan
Blade: made of rust- and oxidation-resistant nitrogen H1 steel
Handle: in FRN (Fiberglass Reinforced Nylon)
Blade length: 57mm.
Blade thickness: 2.5mm.
Closed length: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: -
Note: Previously purchased knife, from a private collection

RETIRED KNIFE FROM PRIVATE COLLECTION
* Provenance: Withdrawn from a private individual, previously purchased
* Condition: Overall in excellent condition, has light surface scratches on the steel handle
* Available on the market: Seventh generation of the model, produced only between 1999 and 2001, currently out of catalogue and out of production
* Sharpening: Factory
* Signs on blade: None
* Handle marks: light surface scratches
* Box: Present, complete and in excellent condition
* Sheath: -
* Manuals, Certificates and Guarantees: Present
* Controlled and Certified by our in-house laboratory

Originally launched in 1987, the Co-Pilot was sold as a small travel knife with a two-inch blade, designed to be carried on airplanes so you never give up a handy pocket or money clip once you arrive at your destination. Times have changed, but the design continues to prove its full validity.

Intended use: Sporty/Collection

Type of production: Industrial
Country of production: Japan
Blade: In stainless steel ATS-55
Blade finish: satin
Handling: stainless steel
Blade length: 51mm.
Blade thickness: 2.5mm.
Closed length: 76mm.
Total length: 127mm.
Weight: 74g.
Locking system: Back Lock
Clip: removable, stainless steel
Packaging: carton box, manuals and warranty
Note: Previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, with very slight surface scratches on the steel handle
* Available on the market: Second generation of the Police model, produced in the 1990s, no longer in production in this particular steel and handle configuration (with only one set of holes for attaching the clip)
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: Very slight surface scratches
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

One of the most iconic folding knives ever made, the Spyderco Police Model was created in the early 1980s to meet the operational needs of law enforcement. Over the generations, it has evolved to become an absolute benchmark among large folding knives. It has a solid Back Lock mechanism that completes a symmetrical and completely ambidextrous structure, designed for reliability and control in any situation.

Intended use: Sports/Collection

Type of production: Industrial
Country of production: Japan
Blade: ATS-55 stainless steel
Blade finish: satin
Handle: stainless steel
Blade length: 100mm.
Blade thickness: 3mm.
Closed length: 135mm.
Total length: 235mm.
Closed thickness: 8mm
Weight: 158g.
Locking system: Back Lock
Clip: removable, stainless steel
Packaging: -
Notes: knife previously purchased from a private collection

KNIFE RETRIEVED FROM A PRIVATE COLLECTION
* Origin: Retrieved from a private collector, previously purchased
* Condition: Generally good, never used
* Commercial availability: Out of production in this configuration
* Sharpening: Factory edge
* Blade marks: A slight “polishing” mark on the left side
* Handle marks: None
* Box: Present, not in like-new condition
* Sheath: -
* Manuals, Certificates and Warranty: -
* Inspected and Certified by our internal laboratory

An iconic knife in Cold Steel’s production, known for its robustness and reliability. Compared to more recent versions, it stands out for the Ultra Lock™ blade locking system, which allows smoother opening than the more recently adopted Tri-Ad Lock™.

Intended use: Tactical / Military
Production type: Industrial
Blade: AUS-8A stainless steel
Blade finish: Tuff-Ex™, the specific name used by Cold Steel for its high-resistance Teflon-based coating
Blade manufacturing: Taiwan
Handle: Aluminum with Grivory insert
Blade length: 90 mm
Blade thickness: 3.5 mm
Closed length: 142 mm
Overall length: 232 mm
Balance: -
Weight: 198 g
Locking system: Ultra Lock™
Clip: Removable and reversible, stainless steel
Sheath: -
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: Available
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

Inspired by the iconic Native, the Shaman echoes its ergonomics and dynamics of use in a larger and even more powerful format. The CPM-S30V stainless steel blade, with full-flat sharpening and functional tip, guarantees high performance and great versatility. The famous Round Hole ensures quick, ambidextrous opening, while the G-10 handle with skeletonized steel liners incorporates the solid Compression Lock for safe and immediate use.

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-S30V stainless steel with full flat grind
Blade treatment: Black DLC
Handle: G10 with stainless steel liners with DLC treatment
Blade length: 91mm.
Blade thickness: 3.7mm.
Closed length: 119mm.
Total length: 210mm.
Weight: 147g.
Closure: Compression Lock
Clip: stainless steel with Black DLC treatment, removable and multi-position
Packaging: cardboard box with Spyderco logos
Notes: Model inspired by the Native, with dimensions increased by approximately 20% - knife previously purchased from a private collection

KNIFE RETIRED FROM PRIVATE COLLECTION
* Origin: Retired from a private collection, previously purchased
* Condition: Perfect, Like new, NOS (new old stock)
* Available on the market: 2006 model, out of production
* Sharpness: Factory sharp, never used
* Marks on blade: None
* Marks on handle: None
* Box: Present and in perfect condition
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

The C70 A.T.R. (At The Ready) embodies the essence of a high-performance tactical folder. Awarded “Knife of the Year 2003” by Knives Illustrated, this model showcases the most advanced technological solutions developed by Spyderco.

The handle, precision-machined from a block of satin-finished stainless steel, is lightened by a series of holes that reduce weight and serve as tactile reference points for quick grip changes. The same holes are replicated on the contoured clip, ensuring balance and consistency in indexing.

The ends of the handle widen into a generous finger choil and a pinky rest, ensuring a stable grip in all conditions. The Compression Lock, fully integrated into the titanium scale, offers maximum strength and is rated for heavy-duty use and MBC applications.

The VG-10 blade, hollow-ground sharp, features a non-sharp swedge and a profile that combines a solid point with excellent penetration and cutting ability. Above the classic Spyderco hole is the Cobra Hood, which naturally guides the thumb during quick opening and acts as a control platform when the knife is in use.

The clip is configurable for both right and left tip-up carry thanks to the pre-drilled holes.

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade finish: satin
Handle: satin stainless steel
Blade length: 87mm.
Blade thickness: 3 mm.
Closed length: 129 mm.
Total length: 216 mm.
Weight: 150g.
Closure: Compression Lock
Clip: polished stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife from a private collection - NOS (new old stock) in perfect condition, absolutely like new, without even a scratch or sign of use

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: 2007 model, like new, mechanically perfect, no signs of use or wear
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present and complete
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house lab

The T01 SpydeRench marks the return of a revolutionary classic in the world of multi-tools. Designed by an aerospace engineer in collaboration with Spyderco's R&D department, this compact tool combines precision engineering and advanced functionality.

Made from corrosion-resistant 17-4ph stainless steel, it features a genuine Spyderco AUS-8 blade that opens and closes with one hand, a pocket clip, an adjustable roll pin wrench up to 9/16", and a two-position plier with superior comfort.

Complete with interchangeable bits and a multifunction diamond file, the T01 SpydeRench offers exceptional versatility: it can extend, lock in various configurations, and even separate into two independent tools. A unique multi-tool, designed for those who demand the best in every situation.

Intended use: Sports / Multipurpose

Type of production: industrial

Country of manufacture: Taiwan
Blade: AUS-8 stainless steel at 58HRC
Blade finish: satin
Handle and accessories: 17-4ph stainless steel
Blade length: 56mm.
Blade thickness: 2.5mm.
Closed length: 111mm.
Total length: 170mm.
Weight: 68g.
Closure: Back Lock
Clip: stainless steel
Notes: previously purchased product from a private collection - unique hybrid product combining multi-purpose pliers, screwdrivers, and knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private collection, previously purchased, WITHOUT BOX

• Condition: good overall condition, never used

• Available on the market: still in production

• Sharpness: factory sharp

• Marks on blade: signs of slight surface oxidation on part of the blade as shown in the photos

• Marks on handle: none

• Box: -

• Sheath: in good overall condition

• Manuals, certificates and warranties: -

• Checked and certified by our in-house laboratory

The Cold Steel 1917 echoes the style of early 20th century military knives, particularly the Bowie and navy models used during the First World War. The design combines classic lines and modern materials, offering a wide, balanced blade ideal for powerful cuts and heavy-duty work. The hardwood handle and steel guard evoke the aesthetics of 1917 service weapons, reinterpreted with Cold Steel's usual robustness.

Use: Sporting / Collectible

Type of production: semi-handcrafted
Blade production: India
Blade: 1085 High Carbon steel
Blade treatment: burnishing
Handle: rosewood
Blade length: 305mm.
Blade thickness: 6.2mm.
Overall length: 440mm.
Balance: rear
Weight: 658g.
Sheath: leather and metal
Packaging: -
Notes:

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, NOS (new old stock), never used or removed from its original box
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present and perfect
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

Created in 1986 as the second official model of the newly formed SOG Specialty Knives, the S2 Trident is not just a knife, but a bridge between the past and the present. Designed in honor of the Navy SEALs and special units that operated in Vietnam, it draws direct inspiration from the legendary MACV-SOG knives of the 1960s, “sterilized” and lethal tools used in the most secret missions of the conflict.

Produced during the company's golden age in Seki, Japan, the Trident combines elegant lines and combat functionality: a thick, balanced AUS-8 steel Bowie blade with impeccable satin finish; ergonomic and durable black micarta stacked washer handle; and the engraved Navy SEAL symbol, a seal of belonging to an elite group. The leather sheath with sharpening stone completes a package designed for operators and collectors.

The S2 Trident is the most refined tribute to SOG's operational past: a homage to the military tradition of Vietnam reinterpreted with Japanese craftsmanship. Today, with a very high rarity index, it is considered one of the most sought-after pieces by military knife collectors, not only for its build quality, but for the history embodied in its blade.

Intended use: Military / Collection

Type of production: industrial
Country of production: Seki - Japan
Blade: AUS-8 stainless steel
Blade finish: Satin
Handle: Stacked micarta rings
Blade length: 160mm.
Blade thickness: 6 mm.
Total length: 278 mm.
Balance: rearward, 1 cm from the guard
Weight: 312 g.
Sheath: leather with pocket for sharpening stone (included)
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: In excellent condition, a couple of visible scratches on the blade caused by rotation when opening and closing the handle and two very small dents in the steel head of the handle
* Available on the market: Out of production and difficult to find, only marketed from 2003 to 2005
* Sharpness: Factory sharp
* Marks on blade: a couple of visible scratches on the blade caused by rotation when opening and closing the handle
* Marks on handle: two tiny dents in the steel head of the handle
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Ed Schempp, a wheat farmer, metallurgist, and renowned knife maker, created the Persian Folder by blending classic Western elegance with exotic Eastern charm. Traditionally, Persian knives are fixed, but Ed reinterpreted this typical shape in a folding knife.

Characterized by curved and harmonious lines, the Persian Folder 90 mm stands out for its black Micarta scales combined with polished stainless steel guards. The handle features a series of finger choils that allow for a firm grip and total control of the blade. The blade, inspired by the East, has a pronounced belly and an elegant upward-pointing tip.

Made of high-performance VG-10 steel with a concave grind, the blade measures 89 mm and features a prominent “hump” above the opening hole, ideal as a thumb rest. The clip allows for right-side tip-up pocket carry. A milling on the locking mechanism, known as the David Boye Dent, increases safety by preventing accidental unlocking during a firm grip.

Intended use: Fighter / EDC

Type of production: industrial
Blade: VG10 stainless steel
Blade finish: Satin
Country of manufacture: Japan
Handle: Micarta and stainless steel
Blade length: 89 mm.
Blade thickness: 3 mm.
Closed length: 121 mm.
Total length: 210 mm.
Weight: 154 g.
Locking system: Back lock
Clip: removable, stainless steel with black coating
Packaging: Cardboard box with Spyderco logos
Notes: knife from a private collection, previously purchased

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: In NOS (New Old Stock) condition / Like new
* Available on the market: Out of production and difficult to find, only marketed in 2011/2012
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Ed Schempp, a wheat farmer, metallurgist, and renowned knife maker, created the Persian Folder by blending classic Western elegance with exotic Eastern charm. Traditionally, Persian knives are fixed, but Ed reinterpreted this typical shape in a folding knife.

Characterized by curved and harmonious lines, the Persian Folder 75 mm stands out for its black Micarta scales combined with polished stainless steel guards. The handle features a series of finger choils that allow for a firm grip and total control of the edge. The blade, inspired by the East, has a pronounced belly and an elegant upward-pointing tip.

Made of high-performance VG-10 steel with a concave grind, the blade measures 75 mm and features a prominent “hump” above the opening hole, ideal as a thumb rest. The clip allows for right-side tip-up pocket carry. A milling on the locking mechanism, known as the David Boye Dent, increases safety by preventing accidental unlocking during a firm grip.

Intended use: Fighter / EDC

Type of production: industrial
Blade: VG10 stainless steel
Blade finish: Satin
Country of manufacture: Japan
Handle: Micarta and stainless steel
Blade length: 75 mm.
Blade thickness: 2.5mm.
Closed length: 100mm.
Total length: 175mm.
Weight: 9g.
Locking system: Back Lock
Clip: removable, stainless steel with black coating
Packaging: Cardboard box with Spyderco logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, a few imperceptible marks on the blade and a few imperceptible spots of oxidation
* Available on the market: Out of production and difficult to find
* Sharpness: Factory sharp
* Marks on blade: a few imperceptible marks on the blade and a few imperceptible spots of oxidation 
* Marks on handle: None
* Box: None
* Sheath: A couple of small marks from storage
* Manuals, Certificates, and Warranties: None
* Checked and certified by our in-house laboratory

The Temperance 2 is Spyderco's answer to the need for a medium-sized fixed blade knife for heavy-duty use. Designed in-house by Sal Glesser for camping, general use, and MBC (Martial Blade Craft), this versatile knife also has a place in the kitchen, where Sal himself uses it both indoors and outdoors.

Made from high-quality VG-10 stainless steel, it features a thick, wide blade with a spear-point profile and flat grind on both sides for excellent cutting performance. The knurling on the spine and finger choil ensure maximum control and precision, while the sturdy construction makes it ideal for survival, hunting, camping, and food preparation.

The Canvas Micarta handle provides a secure grip, excellent grip, and quick indexing during MBC techniques. The flat pommel acts as a leverage point for the thumb in reverse or rearward grips. The Temperance 2 comes with a Boltaron sheath and 5-position Tek-Lok for versatile carry.

Intended use: All-round utility/MBC

Type of production: industrial
Blade: VG10 stainless steel
Blade finish: satin
Country of manufacture: Japan
Handle: Canvas Micarta
Blade length: 124mm.
Blade thickness: 4 mm.
Total length: 247 mm.
Weight: 192 g.
Sheath: Boltaron, with multi-position Tek-Lok attachment
Notes: First series (2010/2015) of the Temperance 2 model; from the second series onwards, the sheath has been made of leather.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, a few imperceptible scratches on the titanium bolsters and a couple of small scratches on the satin finish of the blade
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: a couple of small scratches
* Marks on handle: a few imperceptible scratches on the titanium bolsters
* Box: Present and complete
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

The Cold Steel Hatamoto Custom Series is a high-end folding knife designed for those seeking excellence, performance, and design inspired by samurai tradition.

Produced in a limited edition between 2005 and 2010, this model combines Japanese craftsmanship with American ruggedness with a San Mai III blade, famous for its extraordinary sharpness and superior durability. The enhanced profile ensures effective penetration and superior strength, while the textured G-10 handle with titanium liners and bolsters provides comfort, a secure grip, and a refined aesthetic.

The solid liner lock ensures reliable closure, making this knife not only a collector's item but also a reliable tool for everyday use. Today, the Hatamoto Custom is a rare and coveted item, combining functionality and prestige in a single extraordinary knife.

Intended use: Sports / Collection

Type of production: industrial
Country of production: Japan
Blade: SanMai III laminated stainless steel with VG1 cutting edge
Blade finish: Satin
Handle: Titanium bolsters and scales with three-dimensionally machined G10 grips
Blade length: 100mm.
Blade thickness: 4mm.
Closed length: 125mm
Total length: 229mm.
Weight: 181g.
Lock system: Liner lock
Clip: Removable and reversible, mirror-polished stainless steel
Packaging: Aluminum box with Cold Steel logos and cardboard outer box with “Cold Steel Custom Series” logos
Notes: Previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Overall in good condition, a couple of small cosmetic marks of use on the tip of the blade
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: A couple of small cosmetic marks of use on the tip of the blade
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

The Demko Knives AD20.5 is a high-quality folder offered at a very competitive price. Fun to use and practical for everyday use, it owes much of its appeal to the innovative Shark Lock: a radical system that guarantees a secure blade lock, keeping your fingers safe at all times.

The mechanism is activated by pulling back the “fin” with your thumb or index finger, in a movement similar to that of a flipper opener. Once opened, the blade locks securely and the fin becomes a comfortable thumb rest, complete with jimping for superior control. Additional jimping on the back of the blade and an optional high grip further enhance the handling and versatility of this folding knife.

The AD20.5 represents the perfect balance that every EDC seeks to achieve, and will easily earn a permanent place in your pocket as soon as it enters your collection.

Intended use: Sports/Utility

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S45VN steel
Blade treatment: Stonewashed
Handle: Carbon fiber
Blade length: 82mm.
Blade thickness: 3.2mm.
Total length: 195mm.
Weight: 98g.
Closure: Shark-Lock
Clip: Stainless steel
Packaging: Transparent plastic box with Demko logos
Notes: Design by Andrew Demko - knife previously purchased from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used.
* Condition: Overall in very good condition, has a few small surface scratches on the blade from use.
* Commercially available: Available
* Sharpening: Factory.
* Marks on blade: Small surface scratches visible against the light
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sport/Utility

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN
Blade treatment: Satin finish
Handle: G10
Blade Length: 91mm.
Blade thickness: 3.8mm.
Total length: 223mm.
Weight: 202g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew Demko

KNIFE NOS FULL SET, NEW FROM STOCK
* Type: NOS Knife - New Old Stock - New from Stock
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: Minimal, given by time.
* Marks on handle: -
* Box: Present, original, like new
* Scabbard: Present, original, like new
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory.

The “Recon Tanto” is an iconic knife produced by Cold Steel, known for its reliability and sturdiness. First introduced in 1988, the model was designed to be a combat and survival knife with a design that combines functionality and durability.

Over the years, the “Recon Tanto” has been improved and updated, but has retained its distinctive character and functionality. It has become one of Cold Steel's most recognizable models, thanks to its ability to combine traditional design with modern innovation.

Intended use: collection/tactical/sporting

Type of production: industrial
Country of manufacture: Japan
Blade: stainless steel VG-1
Blade treatment: painting
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balance: advanced
Weight: 265g.
Sheath: Secur-Ex Thermoplastic
Packaging: cardboard box with Cold Steel logos
Notes: knife NOS - New Old Stock - New from stock

KNIFE RETIRED FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private owner, previously purchased and no longer in production
• Condition: Overall in excellent condition
• Commercial Availability: NOT commercially available
• Edge: Original
• Blade marks: None
• Handle marks: None
• Box: -
• Sheath: -
• Manuals, Certificates, and Warranties: -
• Inspected and Certified: by our internal laboratory

The SOG Mini-Vulcan VL-02 is a high-quality folding knife designed to meet the needs of knife enthusiasts and demanding users. Engineered to combine durability, functionality, and refined design, this model is the perfect blend of advanced engineering and precision craftsmanship.

The VG-10 steel blade, extremely sharp and corrosion-resistant, ensures flawless performance both in outdoor settings and daily tasks. The patented Arc-Lock opening mechanism from SOG offers secure and smooth closure while ensuring speed and ease of use.

Compact and lightweight, the Mini-Vulcan is perfect for those seeking a versatile, reliable, and easy-to-carry knife. Whether you’re a collector, hiker, or professional, this knife will be an essential companion, ready to tackle the challenges of any day.

Intended Use: Sporting

Production Type: Industrial
Blade Production: Japan
Blade: VG-10 stainless steel
Blade Treatment: -
Handle: Zytel and steel liners
Blade Length: 78mm
Blade Thickness: 3mm
Closed Length: 109mm
Overall Length: 187mm
Closed Thickness: 20.3mm
Balance: -
Weight: 104g
Locking Mechanism: Arc Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: -
Notes: -

Origin: Withdrawn from a private owner, previously purchased and used
Condition: Overall in good condition, showing minor marks and scratches on the blade and clip
Availability: Discontinued
Sharpening: Blade resharpened and polished
Blade marks: Small signs of wear, especially on the right side
Handle marks: Wear marks on the clip, with partially removed paint
Box: /
Sheath: /
Manuals, Certificates, and Warranties: /
Checked and certified by our internal laboratory

The Spyderco Tasman Salt C106SBK is a folding knife designed to tackle the toughest challenges in marine environments and water-related activities. This version, identified by product code C106SBK, features a Hawkbill blade made of H-1 steel, completely corrosion-resistant, ideal for pull cuts and tough materials like ropes and nets. The black FRN (Fiberglass Reinforced Nylon) handle ensures a secure grip even when wet, while the back lock mechanism provides stable and safe use. Although officially discontinued, the Tasman Salt C106SBK remains a sought-after piece among collectors and professionals due to its unique combination of performance and durability, making it perfect for daily use in maritime settings.

Intended use: Marine activities, fishing, water sports
Production type: Industrial
Country of origin: Japan
Blade: Corrosion-resistant H-1 steel
Blade finish: Satin
Handle: Black FRN (Fiberglass Reinforced Nylon)
Blade length: 75 mm
Blade thickness: 2.5 mm
Closed length: 107 mm
Total length: 173 mm
Closed thickness: Information not available
Weight: 57 g
Lock: Back lock
Clip: Titanium, reversible for tip-up carry
Packaging: No packaging
Notes: Hawkbill blade for pull cuts; fully rust-resistant H-1 steel

Origin: Retrieved from a private collection, previously purchased and used

Condition: Overall in excellent condition

Availability: In production

Edge: Excellent sharpening

Blade marks: Minor marks

Handle marks: /

Box: /

Sheath: /

Manuals, Certificates, and Warranties: /

Checked and Certified: By our internal laboratory

The Spyderco Saver Salt is a folding knife specifically designed for marine environments and emergency situations. Part of Spyderco’s renowned Salt series, this knife combines corrosion-resistant materials with a functional design, making it ideal for divers, sailors, and rescue operators.

The H-1 steel blade, known for its exceptional rust resistance, features a sheepfoot profile with a rounded tip, minimizing the risk of accidental punctures during cutting near delicate surfaces or in rescue scenarios. The high-visibility yellow FRN (fiberglass-reinforced nylon) handle ensures a secure grip with its non-slip texture, making it effective even with wet or gloved hands.

The oversized 14 mm thumb hole ensures easy operation in challenging conditions, while the ambidextrous pocket clip and lanyard hole provide versatile carrying options. Lightweight yet robust, the Saver Salt is a reliable companion for those working in aquatic environments or requiring a high-quality rescue knife.

• Intended Use: Rescue, marine activities
• Production Type: Industrial
• Country of Manufacture: Japan
• Blade: H-1 stainless steel
• Blade Finish: Satin
• Handle: Yellow FRN (fiberglass-reinforced nylon)
• Blade Length: 79 mm
• Blade Thickness: 3 mm
• Closed Length: 104 mm
• Total Length: 182 mm
• Closed Thickness: 10 mm
• Weight: 61 g
• Lock: Back lock
• Clip: Removable and reversible, stainless steel
• Packaging: -
• Notes: Rounded tip for enhanced safety; 14 mm thumb hole for easy opening; corrosion-resistant, ideal for marine environments.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased and used.
* Condition: Overall in good condition, shows minor signs of wear on blade and clip.
* Commercially available: Discontinued
* Sharpening: Blade resharpened and polished.
* Marks on blade: Small signs of wear, especially on right side
* Marks on handle: Small signs of wear on clip, with paint partially removed
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: / /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Type of production: industrial
Blade: stainless steel ZDP-189
Blade finish: Satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 72g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: previously purchased knife, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used.
* Condition: Overall in good condition, some signs of wear on clip and handle.
* Commercially available: Discontinued
* Sharpening: Professionally sharpened
* Marks on blade: None
* Marks on handle: A few small abrasion marks, clip lacking paint in several places
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: / /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel VG10
Blade Finish: Satin finish
Handle: Fiberglass reinforced nylon (FRNR)
Blade Length: 79mm.
Blade thickness: 2mm.
Length closed 114mm.
Total length: 192mm.
Weight: 71g.
Closure: Back Lock
Clip: removable, stainless steel
Scabbard: -
Packaging: 
Notes: previously purchased knife, from private collection

Translated with www.DeepL.com/Translator (free version)

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used.
* Condition: Overall in good condition, some signs of wear on clip and handle.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: A few small abrasion marks, clip lacking paint in several places
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: / /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel VG10
Blade Finish: Satin finish
Handle: Fiberglass reinforced nylon (FRNR)
Blade Length: 79mm.
Blade thickness: 2mm.
Length closed 114mm.
Total length: 192mm.
Weight: 71g.
Closure: Back Lock
Clip: removable, stainless steel
Scabbard: -
Packaging: 
Notes: previously purchased knife, from private collection

The SOG Winder II Heavy Duty Folding Knife (model SOG00009) exemplifies high quality and precision in knife making. With a blade length of 8.8 cm and a thickness of 4.7 mm, it is perfect for all kinds of tasks, providing excellent performance in cutting, slicing and piercing. The black textured Kraton handle provides an excellent grip, while the sturdy Lockback mechanism ensures safety during use.

The knife has an ambidextrous design, making it easy for both left- and right-handed people to use, and its compactness (11.4 cm when closed) makes it convenient to carry in a pocket or backpack. Made in Seki, Japan, a city with a long tradition of knife making, the Winder II is synonymous with high quality and craftsmanship.

Purchased in 1994 from the well-known Hoffritz cutlery chain in New York and now discontinued, it is a collector's item of great historical value. This knife, from a private collection, shows no signs of use, and is a prized piece for enthusiasts and collectors.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: In very good condition, with normal signs due to time
* Commercially available: 1994 knife - Discontinued model
* Sharpening: Factory.
* Marks on blade: Normal marks given by the opening and closing of the blade.
* Marks on handle: No.
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Collection

Production Type: Industrial
Country of Production: Japan
Blade: stainless steel AUS-8
Blade finish: satin finish
Handle: stainless steel and kraton
Blade length: 88mm.
Blade thickness: 4.7mm.
Length closed: 114mm.
Total length: 205mm.
Weight: 220g.
Closure: back-Lock
Notes: previously purchased 1994 knife, discontinued, in excellent condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Type of production: industrial
Blade: stainless steel ZDP-189
Blade finish: Satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Weight: 104g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: previously purchased knife, from private collection

Condition: Withdrawn from a private collection, previously purchased.
Condition Details: Overall in excellent condition.
Available on the market: NO
Edge: Factory edge.
Blade marks: None.
Handle marks: None.
Box: /
Sheath: /
Manuals, Certificates, and Warranties: /
Inspected and Certified: By our in-house lab.

The Spyderco Bob Terzuola Slipit C131 is a folding knife with a non-locking blade (Ball Joint Mechanism) designed by renowned master knifemaker Bob Terzuola. This model combines elegant design with advanced functionality, making it ideal for both collectors and knife enthusiasts.

Intended Use: Sport / EDC
Production Type: Industrial
Blade Origin: Taiwan
Blade Material: CPM-S30V stainless steel
Blade Treatment: -
Handle: Carbon Fiber
Blade Length: 75mm
Blade Thickness: 2.5mm
Closed Length: 100mm
Total Length: 175mm
Closed Thickness: 17mm
Weight: 70g
Lock Mechanism: Ball Joint
Clip: Stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: Design by Bob Terzuola

The Bob Terzuola Slipit C131 features a modified Wharncliffe blade with a razor-sharp edge, perfect for precise cuts. The carbon fiber handle provides a secure grip and refined aesthetics. The Ball Joint mechanism ensures secure closure without the use of a traditional lock, making it compliant with regulations in many jurisdictions. The reversible pocket clip allows discreet and convenient carrying. This knife represents a perfect fusion of traditional craftsmanship and modern innovation.

• Origin: Acquired from a private owner, previously purchased
• Condition: Overall in excellent condition
• Available on the market: NO
• Sharpening: Factory edge
• Blade marks: None
• Handle marks: None
• Box: Not included
• Sheath: /
• Manuals, Certificates, and Warranties: /
• Checked and Certified: By our in-house laboratory

The Spyderco Meerkat C64JPBG is a compact and versatile folding knife, ideal for those seeking a reliable and discreet tool for everyday use. This model, part of a limited production run (Sprint Run) from 2009-2010, stands out for its exclusive Phantom Lock™ mechanism and VG-10 steel blade, renowned for its excellent balance of edge retention and corrosion resistance. The blue/gray FRN (fiberglass reinforced nylon) handle ensures a secure and comfortable grip, while the ambidextrous clip allows for discreet and practical carrying. With a total length of 151 mm and a weight of just 70 g, the Meerkat combines portability and functionality, making it a valuable addition for collectors and knife enthusiasts.

• Intended Use: Everyday use, collection
• Production Type: Industrial (Sprint Run)
• Country of Manufacture: Japan
• Blade: VG-10 stainless steel
• Blade Finish: Satin
• Handle: Blue/gray FRN
• Blade Length: 51 mm
• Blade Thickness: 2.5 mm
• Closed Length: 100 mm
• Total Length: 151 mm
• Closed Thickness: 12 mm
• Weight: 70 g
• Lock: Phantom Lock™
• Clip: Ambidextrous, tip-down, stainless steel
• Packaging: Original Spyderco box
• Notes: Limited Sprint Run edition from 2009-2010, featuring the exclusive Phantom Lock™ mechanism.

Origin: Taken from a private collection, previously purchased
Condition: Overall in excellent condition
Commercial Availability: NO
Edge: Factory edge
Blade Marks: Small scratches
Handle Marks: Clip slightly scratched
Box: Absent
Sheath: /
Manuals, Certificates, and Warranties: /
Inspected and Certified: by our in-house laboratory

The Spyderco Rescue Wave C14SGYW is a professional folding knife designed to meet the needs of rescuers and emergency operators. Featuring a practical and safe design, it combines excellent craftsmanship and technological innovation to ensure top performance even in the most challenging situations. The VG-10 Japanese steel blade, with a sheepfoot profile and fully serrated edge, is designed to effectively handle tough materials like seat belts, ropes, and fabrics. The unique Emerson "Wave" opening system enables quick and intuitive deployment directly from the pocket, speeding up operations in critical moments. The gray FRN (Fiberglass Reinforced Nylon) handle provides a comfortable and secure grip even in extreme conditions, while the back-lock mechanism adds extra safety during use. Compact, lightweight, and functional, the Rescue Wave is a benchmark tool for those seeking reliability and practicality in a single instrument.

Product Details
Intended Use: Rescue, EDC (Everyday Carry)
Production Type: Industrial
Country of Origin: Japan
Blade: VG-10 stainless steel
Blade Finish: Satin
Handle: Gray FRN (Fiberglass Reinforced Nylon)
Blade Length: 93 mm
Blade Thickness: 3 mm
Closed Length: 117 mm
Total Length: 210 mm
Closed Thickness: 12 mm
Weight: 105 g
Lock Mechanism: Back-lock
Clip: Stainless steel, reversible, four-position
Packaging: -
Notes: Equipped with Emerson's "Wave" opening system for quick blade deployment

Exclusive product created in collaboration with the PDT YouTube channel - The Cutthroat's Park. This unique knife was actually used in a field test that you can view directly in this product sheet.

To make it even more special, we engraved Floriano's autograph and the PDT logo on the blade. The box of the knife was also autographed by Floriano making it a must-have collector's item.

KNIFE FROM A PRIVATE COLLECTION
* Provenance: PDT YouTube channel.
* Condition: Overall in very good condition.
* Commercially available: By catalog
* Sharpening: Factory sharpened, stropped by Floriano after use.
* Marks on blade: Small signs of concrete use.
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sport/Utility

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN
Blade treatment: Satin finish
Handle: OD Green G10
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: knife used in a YouTube video review by Floriano of PDT

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in good condition, with some signs of wear and tear.
* Commercially available: 1993 model in G-2 steel, discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few signs of wear and time.
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting/Collection

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel G-2
Blade Finish: Satinized
Handle: Stainless steel
Blade length: 50mm.
Blade thickness: 2.5mm.
Length closed: 77mm.
Total length: 126mm.
Thickness when closed: 6mm
Weight: 71g.
Closure: Back Lock
Clip: stainless steel
Packaging: -
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Excellent condition, no marks or defects.
* Commercially available: Still in catalog.
* Sharpening: Factory sharpened, but improvable
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: Manual present.
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S30V Powder Steel
Blade treatment: Stonewashed
Handle: G10 with stainless steel liners
Blade Length: 91mm.
Blade thickness: 3.8mm.
Length closed: 119mm.
Total length: 210mm.
Weight: 147g.
Closure: Compression Lock
Clip: stainless steel
Packaging: absent; only manual present
Notes: Previously purchased knife from a private collection - Model taking inspiration from the Native, with dimensions increased by about 20 percent

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: Japan
Blade: VG10 stainless steel
Blade Finish: Black TiNi
Handle: Zytel with steel liners
Blade Length: 78mm.
Blade thickness: 3mm.
Length closed 109mm.
Total length: 187mm.
Thickness when closed: 20.3mm.
Weight: 104g.
Closure: Arc Lock
Clip: removable, stainless steel
Scabbard: -
Packaging: cardboard box with SOG logos
Notes: previously purchased knife from a private collection

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: NOT in production
* Sharpness: Original sharpness
* Marks on blade: None
* Marks on handle: None
* Box: Original
* Sheath: /
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our internal laboratory

Intended use: Tactical/Sports

Blade: Teflon-coated 440A stainless steel
Blade production Taiwan
Handle: Zytel
Blade length: 100mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 230mm.
Balancing: -
Weight: 155g.
Closure: Liner Lock
Clip: removable, stainless steel
Sheath: -
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: New
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S30V
Blade Finish: Satin finish
Handle: Carbon Fiber and G10 Laminate
Blade Length: 88mm.
Blade thickness: 3.5mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 94g.
Closure: Compression Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: In very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks above the opening hole, right side blade (see photo)
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Type of Production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Satin finish
Handle: Stainless steel and G10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 121mm.
Total length: 221mm.
Weight: 119g.
Closure: Liner Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, packaging slightly damaged
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: EDC / Rescue

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 2mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 70g.
Closure: Back Lock
Clip: stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: -

KNIFE RETIRED FROM PRIVATE COLLECTION

Type: Previously purchased
Condition: in like-new condition
Commercial availability: Available
Sharpening: Factory
Blade marks: -
Handle marks: -
Box: Present
Sheath: -
Manuals, Certificates, and Guarantees: Present
Checked and Certified by our in-house laboratory
Intended Use: Sporting

Production Type: Industrial
Blade: VG-10 stainless steel
Blade Treatment: -
Blade Production: Japan
Handle: Stainless Steel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balance: -
Weight: 161g.
Locking Mechanism: Back Lock
Clip: Removable, multiposition, stainless steel
Sheath: -
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition.
* Commercially available: Findable
* Sharpening: Factory.
* Marks on blade: Small abrasions on matte black finish.
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: black titan carbonitriding
Country of manufacture: Japan
Handle: black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Weight: 106g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: previously purchased knife, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: overall in very good condition
* Commercially available handcrafted version no longer commercially available.
* Sharpening: factory sharpened, never resharpened
* Marks on blade: none
* Marks on handle: a few tiny little marks on carbon
* Box: present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Utility / Collection

Production type: MidTech
Country of Manufacture: USA (Wampum, Pennsylvania)
Blade: CPM-CruWear 63/64HRC steel
Blade treatment: Stonewashed
Handle: 5mm thick Carbon Fiber with stainless steel top folder
Blade length: 95mm.
Blade thickness: 4.5mm.
Total length: 220mm.
Weight: 174g.
Closure: Shark-Lock
Clip: stainless steel
Packaging: cardboard box with Demko logos
Notes: previously purchased knife from private collection - rare semi-crafted version (MidTech) personally made by the knife maker in his own workshops in Wampum, discontinued and no longer commercially available

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Commercially available Discontinued, remained on the market from 2013 to 2017.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small abrasion marks on the clip.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Satin finish
Handle: Titanium and Carbon Fiber laminated Cubic Check
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 116mm.
Total length: 195mm.
Weight: 119g.
Closure: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multiposition and removable, stainless steel
Notes: Previously purchased knife from a private collection - Design by Eric Glesser - Opening via patented Carson Flipper system - Pivot on ball bearings

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased and Used
Conditions: In excellent conditions
Available in the market: Out of production since 2010
Sharpening: Factory
Marks on blade: NO
Marks on handle: NO
Box: Present
Sheath: -
Manuals, Certificates, and Warranties: No
Checked and Certified by our internal laboratory
Intended use: Sport / Collection

Type of production: Industrial
Blade Production: USA
Blade: In CPM-S30V stainless steel
Blade finish: Satin
Handle: G10
Blade Length: 87mm.
Blade Thickness: 3.5mm.
Closed Length: 122mm.
Total Length: 210mm.
Weight: 110g.
Closure: Compression Lock
Clip: Painted stainless steel
Packaging: Cardboard box with Spyderco logos
Notes:

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Overall in good
* Commercially available: Discontinued in 2017.
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small signs of wear and tear.
* Marks on handle: None
* Box: Present and original
* Scabbard: Present and original, modified for belt carry.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Sporting / Neckwear

Production Type: Industrial
Country of Production: Japan
Blade: full tang, Stainless steel VG-10
Blade finish: satin finish
Handle: Micarta
Blade length: 85mm.
Blade thickness: 4mm.
Total length: 181mm.
Weight: 148g.
Sheath: Neck, boltaron, with possibility of Tek-Lok or MOLLE type attachments
Packaging: Cardboard box with Spyderco logos.
Notes: Design by Fred Perrin - Discontinued item, previously purchased, from private collection - Supplied with two removable attachments for belt carry

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Condition: in good condition
Available in stores: NO
Sharpening: Resharpened by our internal laboratory
Marks on blade: NO
Marks on handle: YES, small scratches
Packaging: YES
Checked and Certified by our internal laboratory
A pollywog represents metamorphosis in the animal kingdom, adapting and changing its form to survive in its environment. The same principle applies here. The Spyderco Poliwog CLIPIT® thrives in a small-knife-friendly environment while keeping the features necessary to excel in a harsh, heavy cutting and performance setting. Its distinctive opened-ended Ball Bearing Lock™ exposes the knife's inner workings for easy cleaning and rates as one of Spyderco's highest strength locking mechanisms. Pulling back on the ball unlocks the blade ambidextrously from either side of the knife.

The hand settles on the curved handle positioning the index finger into a choil that optimizes control and generates less fatigue and pressure on the hand during cutting. Made from VG-10, the blade has a hollow-ground edge with a weight reducing swedge-grind extending mid-spine to the tip. It is available in PlainEdge. Its ambidextrous wire-tension pocket clip sets the Poliwog tip-up in the pocket.

Intended use: Sporting / EDC

Type of production: Industrial
Blade Production: Japan
Blade: in VG10 stainless steel
Blade Treatment: -
Handle: in steel
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: 86mm.
Total length: 145mm.
Thickness when closed: -
Balance: -
Weight: 116g.
Closure: Ball Bearing Lock™
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: -

KNIFE NOS FULL SET, NEW FROM STOCK
* Type: 1995 NOS knife - New Old Stock - New from stock
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory.
* Marks on blade: Given by time
* Marks on handle: Given by time.
* Box: Present, original, in very good condition
* Scabbard: Present, original, in very good condition, with small marks given by time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: collection / tactical / sporting

Type of production: Industrial
Country of Production: USA
Blade: Carbon V steel
Blade treatment: varnishing
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balance: advanced
Weight: 265g.
Sheath: Cordura
Packaging: cardboard box with Cold Steel logos and "Made in USA" logos.
Notes: knife from 1995 NOS - New Old Stock - New from stock

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available Discontinued since 2003
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, some signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: Yes
* Checked and certified by our internal laboratory

Intended use: Sporting

Type of production: industrial
Blade: ATS-55 stainless steel
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 50mm.
Blade thickness: 1.9mm.
Length closed: 70mm.
Total length: 118mm.
Weight: 36g.
Closure: Liner Lock
Clip: Removable, stainless steel
Notes: Version remained in production from approximately 1997 to 2003 - example withdrawn from a private collection, overall in very good condition.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

SERIAL NUMBER 0231

* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Limited series, discontinued
* Sharpening: Factory
* Marks on blade: Slight, uneven treatment in places (factory, not due to wear)
* Marks on handle: No
* Box: Present and original, WITH AUTOGRAPH SIGNATURE OF LYNN THOMPSON
* Scabbard: Not present
* Manuals, Certificates and Warranties: no
* Checked and certified by our in-house laboratory

Intended use: Sporting/EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel Carpenter CTS XHP Alloy 59/60HRC
Blade treatment: DLC
Handle: Griv-Ex
Blade length: 135mm.
Blade thickness: 3.6mm.
Length closed: 170mm.
Total length: 304mm.
Weight: 208g.
Closure: Back Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with Cold Steel logos
Notes: Numbered and limited edition (serial no. 0231) with signature of "Lynn C. Thompson" laser engraved on the blade and in pen on the packaging

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Discontinued as of 2019
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, but without label and with signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: No
* Checked and certified by our internal laboratory

Intended use: Sporting

Type of production: industrial
Blade: stainless steel VG-10
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 94mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 213mm.
Weight: 115g.
Closure: Back Lock
Clip: Removable, double positioning, stainless steel
Notes: Version remained in production approximately from 2004 to 2019 - specimen withdrawn from private collection, overall in good condition. Equipped with retractable glass breaker and whistle integrated in the handle.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory.
* Marks on blade: slight marks near the handle, due to blade opening.
* Marks on handle: No.
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory




Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: FRN (fiberglass reinforced nylon)
Blade length: 57mm.
Blade thickness: 2.5mm.
Length closed: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: made of FRN, integrated into the handle
Notes: Third series made by Spyderco for the Dragonfly model, version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in very good condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight signs of wear, especially on clip
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory



Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: G10 Foliage Green and Stainless Steel
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 90g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in good condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

* Type: Previously Purchased
* Condition: in like-new condition with perfect original box
* Commercially available Discontinued since 2013
* Sharpening: Original edge
* Marks on blade: no
* Marks on handle: no
* Box: yes
* Scabbard: no
* Manuals, Certificates and Guarantees: no
* Checked and certified by our in-house laboratory

Intended use: Sporting / Utility

Production type: Industrial
Country of manufacture: Japan
Blade: SANMAI stainless steel
Blade finish: Satin finish
Handle: Micarta and Titanium
Blade length: 115mm
Blade thickness: 4mm.
Total length: 235mm.
Weight: 152g.
Closure: Liner Lock
Clip: Stainless steel
Packaging: aluminium box with Cold Steel logos
Notes: -

For almost a decade, Cold Steel® offered a wicked-looking little boot knife called the Culloden®. It was based on the traditional Scottish 'black knife' or 'Skean Dhu' as it is more commonly called in Gaelic, the ancient language of Scotland.

The Caledonian Edge™ features a number of modern variations and refinements over its predecessor. The blade is made of a virtually unbreakable San Mai III® construction and, like the original Skean Dhu, features a thin, sharp point, as sharp as the proverbial needle. 

The traditional tang seen on the Skean Dhu of yesteryear has been retained and provides an aggressive, non-slip platform for the thumb and forefinger, allowing for better control when using the blade to cut or pierce.

The handle of the Caledonian Edge™ has a profile that hugs the palm of the hand and a relatively thin cross-section that enhances its qualities. It is flat enough not to roll or twist in the palm of the hand, yet comfortable enough to accommodate a wide range of grip styles. A perfect blend of strength and beauty, it features a mirror-polished black Micarta superstructure and titanium bolsters.ne handed opening.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

The first and original Tanto "Made in Japan", here in a 1980's version with a San Mai steel blade, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto.

* Type: Previously Purchased
* Condition: very good, never used, some light surface marks (visible against the light)
* Commercially available Out of production
* Sharpening: Original wire
* Marks on blade: yes, superficial
* Marks on handle: no
* Box: no
* Scabbard: Present - Original, in good general condition, some marks present
* Manuals, Certificates and Warranties: no
* Checked and certified by our internal laboratory

Intended use: Collection

Type of production: Industrial
Country of manufacture: Japan
Blade: San Mai steel - Made in Japan
Blade treatment: satin finish
Handle: Kraton with brass guard and pommel
Blade length: 145m
Blade thickness: 4.7mm.
Total length: 285mm.
Balance: recessed
Weight: 268g.
Sheath: Black leather, branded "Japan".
Packaging: without original box
Notes: Knife from a private collection, first series, produced in the 1980s and out of production since the 1990s, overall in very good condition.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2000
* Sharpening: Factory.
* Marks on blade: Small marks due to blade opening.
* Marks on handle: Small marks on metal pins.
* Box: Yes, original
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory



Intended Use: Sporting / EDC / Collection

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8
Blade Finish: Satin finish
Handle: G-10 with stainless steel liners
Blade length: 73mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 170mm.
Weight: 65g.
Closure: Back Lock
Clip: painted stainless steel, removable
Packaging: white cardboard box, no logos, with serial number, production code and Spyderco bar code
Notes: Knife produced in June 1997 - remained in production only from 1997 to 2000, experimental version of the Calypso Jr. model.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available: Discontinued, replaced by new variants in different steels
* Sharpening: Factory sharpened
* Marks on blade: No
* Marks on handle: No
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: - 
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / Collection 

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade treatment: Microbead blasted
Handle: Duralumin A7075 
Blade length: 152mm.
Blade thickness: 4mm.
Length closed: 178mm.
Total length: 330mm.
Thickness when closed: 22mm.
Weight: 258g.
Closure: LinerLock type
Clip: removable, painted stainless steel
Notes: discontinued knife, like new, withdrawn from private collection

Knife withdrawn from a private collection - In like new condition - Comes with original box - Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Blade treatment: -
Handle: Aluminum 7075 and G-10
Blade length: 195mm.
Blade thickness: 4mm.
Total length: 425mm.
Thick when closed: -
Balancing: -
Weight: 425g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note: -

Knife withdrawn from private collection - Model produced from 2012 to 2016 now no longer available - Specimen in like new condition, supplied with original box - Some small signs of wear on the rear handle, at the height of where the clip rests against the titanium - Checked and certified by our in-house laboratory




Intended Use: Sporting

Production type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Stone Washed
Handle: Titanium
Blade length: 65mm.
Blade thickness: 4.5mm.
Length closed: 87mm.
Total length: 152mm.
Thickness when closed: -
Weight: 102g.
Closure: Frame Lock
Clip: Stainless Steel
Packaging: Cardboard box with Spyderco logos
Notes: Design by Marcin Slysz - Knife withdrawn from private collection in like-new condition

Knife withdrawn from private collection - model now discontinued and no longer available - 83mm blade "small" version - overall in excellent condition, shows no signs of wear or use - factory sharpening in perfect condition - no packaging - checked and certified by our in-house laboratory.

Intended Use: Sporting / EDC

Type of production: Industrial
Country of manufacture: USA
Blade: Stainless steel CPM-S30V
Blade finish: satin finish
Handle: G-10 with stainless steel liners
Blade length: 83mm.
Blade thickness: 3.5mm.
Length closed: 117mm.
Total length: 201mm.
Weight: 155g.
Closure: Back Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: discontinued knife - withdrawn from private collection, overall in very good condition

Knife from a private collection - The first and original Tanto "Made in Japan", here in the second series from 1986, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto - Overall in very good condition, with no particular scratches, marks or abrasions on blade and handle; a few small marks of time on scabbard - Product still has original factory sharpening, although it would need a brightening-no signs of wear anyway - Supplied with its own original leather scabbard marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: Japan
Blade: made of "Cold Steel's 400 Series Stainless" steel (presumably 420 stainless)
Blade treatment: satin finish
Handle: made of Kraton with brass guard and pommel
Blade length: 145m.
Blade thickness: 5mm.
Total length: 285mm.
Balance: backward
Weight: 259g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.

Knife from a private collection - First series, first generation, the first and original "Made in USA" Trailmaster from 1988 - Overall in good condition, shows small signs of oxidation on the blade and some minor signs of time on the leather sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath, but lacking box and manuals - Checked and certified by our in-house lab.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: USA
Blade: Carbon V steel
Blade treatment: satin finish
Handle: kraton and brass
Blade length: 240mm.
Blade thickness: 8mm.
Total length: 370mm.
Balance: advanced
Weight: 515g.
Sheath: black leather
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988, overall in good condition.

Knife from a private collection - The first and original Magnum Tanto "Made in Japan" from 1988, progenitor of the modern generation continued with the Magnum Tanto II in 1990 - Overall in very good condition, with no particular scratches, marks or abrasions on blade, handle and sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: Japan
Blade: stainless steel AUS-8A
Blade treatment: satin finish
Handle: kraton
Blade length: 230mm.
Blade thickness: 5mm.
Total length: 370mm.
Balance: advanced
Weight: 330g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.

Knife from a private collection - The original Recon Tanto "Made in USA" of the '90s, progenitor of the current generation - Absolutely like new, never taken out of the box, still with the original factory grease on the blade, sheath without signs of use and knife insertion - Complete, with original box and Cold Steel warranty - Checked and certified by our internal laboratory.

Intended use: collection / tactical / sporting

Production type: Industrial
Country of Production: USA
Blade: Carbon V steel
Blade treatment: varnishing
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balancing: advanced
Weight: 265g.
Scabbard: Simil-leather
Package: Cardboard box with Cold Steel and "Made in USA" logos
Notes: Knife from a private collection - Made in the late 90's (presumably 1997/1998) - Absolutely like new

Knife withdrawn from a private collection - Condition like new - Re-sharpened by our sharpening laboratory - Original box - Knife checked and certified by our internal laboratory

Intended use: Sports

Type of production: industrial
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Production Lama: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 68g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Notes: Flat Ground sharpening

Knife collected from private collection - Absolutely like new, old production CPM-S30V steel - Never used - Original sharpening - Original box, slightly marked, with certificates - Knife checked and certified by our internal laboratory

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade Treatment: Stonewashed
Handle: G-10
Blade Length: 75mm.
Blade thickness: 3.7mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 96g.
Closure: Compression Lock
Clip: Stainless steel
Package: cardboard box with Spyderco logos
Notes: like new knife, taken from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: 2007 model, like new, mechanically perfect, no signs of use or wear
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present and complete
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house lab

The T01 SpydeRench marks the return of a revolutionary classic in the world of multi-tools. Designed by an aerospace engineer in collaboration with Spyderco's R&D department, this compact tool combines precision engineering and advanced functionality.

Made from corrosion-resistant 17-4ph stainless steel, it features a genuine Spyderco AUS-8 blade that opens and closes with one hand, a pocket clip, an adjustable roll pin wrench up to 9/16", and a two-position plier with superior comfort.

Complete with interchangeable bits and a multifunction diamond file, the T01 SpydeRench offers exceptional versatility: it can extend, lock in various configurations, and even separate into two independent tools. A unique multi-tool, designed for those who demand the best in every situation.

Intended use: Sports / Multipurpose

Type of production: industrial

Country of manufacture: Taiwan
Blade: AUS-8 stainless steel at 58HRC
Blade finish: satin
Handle and accessories: 17-4ph stainless steel
Blade length: 56mm.
Blade thickness: 2.5mm.
Closed length: 111mm.
Total length: 170mm.
Weight: 68g.
Closure: Back Lock
Clip: stainless steel
Notes: previously purchased product from a private collection - unique hybrid product combining multi-purpose pliers, screwdrivers, and knife

Knife collected from private collection - Limited edition "Sprint Run" model remained in production only in 2010 - Like-new condition, comes with original box, manuals, factory sharpening, never carried in pocket or used - Checked and certified by our in-house lab.

Intended use: sporting / collection

Production type: industrial
Country of manufacture: Seki - Japan
Blade: Stainless steel ZDP-189
Blade finish: Satin finish
Handle: Carbon fiber with stainless steel liners
Blade length: 70mm.
Blade thickness: 2.5mm.
Length closed: 93mm.
Total length: 157mm.
Weight: 55g.
Closure: LinerLock
Clip: Stainless steel, removable
Notes: Design by Michael Walker - Sprint Run Edition released only in 2010 - Collected from private collection, exactly like new, with box and manuals

Designer Notes

Michael Walker is to the knife industry what Michael Jordan is to basketball or Wayne Gretsky is to field hockey. He shattered established standards, jumping into uncharted territory and elevating the art of cutlery to greater heights of innovation and modernity.

In 1980, the folding knife industry had few locking innovations and only the traditional Back Lock existed. In 1981 Walker invented, developed and eventually trademarked the Michael Walker LinerLock® adding a leaf spring that locked the blade open, making it a true one-handed openable folding knife. He also included a latch to hold the blade closed using the force of the inner folder spring so it wouldn't open in a pocket to the user.

This innovation of his opened the door to modern cutlery, allowing for multiple new designs and future developments up to today's SubFrame Lock, Frame Lock, Flipper Folder and IKBS ball bearing opening systems.

Other inventions include the "Lake and Walker Safety System" or LAWKS, BLADELock, Ball bearing lock, and Tough Lock.

Some of the manufacturing companies he has worked with include Spyderco, Columbia River Knife and Tool, Schrade, Böker, and Klotzli.

Walker's knives and designs have inspired many other custom knife makers, most notably Bob Terzuola and Ernest Emerson. Terzuola credits Walker with teaching him how to make a linerlock folder and Emerson said that seeing a Walker knife at a gun show gave him the inspiration to become a knifemaker.

Walker's knives can be found at the Artifex Gallery in Taos and in most prestigious collections around the world.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Used, in good condition
* Commercially available: Commercially available, but with different steels.
* Sharpening: Factory sharpened
* Marks on blade: A few small signs of wear and tear.
* Marks on handle: A few small signs of wear on G10.
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting/EDC

Production Type: Industrial
Country of Production: Taiwan
Blade: 440C stainless steel
Blade Finish: Satin finish
Handle: G10
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 90mm.
Total length: 150mm.
Thickness when closed: 9mm.
Weight: 72g.
Closure: Liner Lock
Clip: removable and reversible stainless steel
Packaging: cardboard box with Spyderco logos

MESSER AUS PRIVATER SAMMLUNG ENTNOMMEN
* Typ: Zuvor gekauft
* Zustand: Gebraucht, in gutem Zustand
* Kommerziell verfügbar: Erhältlich, aber mit verschiedenen Stählen
* Schärfung: Werkseitig geschärft
* Marks on blade: Keine
* Marks on handle: Some small signs of wear on G10
* Box: Vorhanden, aber leicht beschädigt
* Scheide: /
* Handbücher, Zertifikate und Garantien: /
* Geprüft und zertifiziert durch unser hauseigenes Labor

Verwendungszweck: Sporting/EDC

Produktionsart: Industriell
Land der Herstellung: Taiwan
Klinge: 440C rostfreier Stahl
Klingenfinish: Satinierte Oberfläche
Griff: G10
Klingenlänge: 60mm.
Dicke der Klinge: 2,5 mm.
Länge geschlossen: 90mm.
Gesamtlänge: 150mm.
Dicke im geschlossenen Zustand: 9mm.
Gewicht: 72g.
Verschluss: Liner Lock
Clip: Abnehmbar und umkehrbar aus Edelstahl
Verpackung: Pappschachtel mit Spyderco-Logos

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: In like new condition
* Commercially available: No
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Yes original
* Manuals, Certificates and Guarantees: Yes
* Checked and Certified by our internal laboratory

Intended use: Sports
Type of production: Industrial
Blade production: Japan
Blade: laminated stainless steel with VG-10 cutting edge
Blade Treatment: -
Handle: Zytel and steel liners
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed length 123mm.
Total length: 210mm.
Closed thickness: 21.5mm.
Balancing: -
Weight: 144g.
Closure: Arc Lock
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with SOG logos
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, unused
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard:/
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Hunting / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-1
Blade treatment: Satin finish
Handle: Thermorun
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 127mm.
Total length: 216mm.
Weight: 122g.
Closure: Back Lock
Clip: stainless steel, removable
Packaging: cardboard box with Cold Steel logos
Notes: discontinued item, like new, from private collection