Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows some barely noticeable signs of aging on the Zytel handle and a couple of small spots of oxidation on the tip of the blade (right side), which in no way compromise its practical use
* Commercially available: Discontinued
* Sharpness: Factory-sharpened; could be improved
* Marks on blade: A couple of small spots of oxidation on the tip of the blade, on the right side, which in no way compromise its practical use
* Marks on handle: A few barely noticeable signs of aging
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

Intended use: sports / collectible

Production type: Industrial
Country of manufacture: Japan
Blade: VG-10 stainless steel
Blade finish: Satin
Handle: Zytel, with stainless steel liners
Blade length: 90 mm.
Blade thickness: 4 mm.
Closed length: 120 mm.
Overall length: 210 mm.
Thickness when closed: 20 mm.
Weight: 135 g.
Closure: Arc-Lock (crossbar lock)
Clip: removable, stainless steel
Packaging: -
Notes: Previously purchased knife, from a private collection

PREVIOUSLY PURCHASED AND USED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased and used
* Condition: Good overall condition, with evident signs of age and use
* Commercial availability: Discontinued
* Sharpening: Resharpened
* Marks on blade: Present, with scratches, abrasions and surface dulling consistent with age and use
* Marks on handle: Present, with natural patina and signs of use on the stacked leather washers
* Box: -
* Sheath: Present, original leather sheath, heavily used and showing signs of age
* Manuals, Certificates and Warranties: -
* Inspected and Certified by our in-house laboratory

The SOG S1 Bowie Vietnam 5th Special Forces Group is one of the most representative knives in the history of SOG Specialty Knives and the model with which the American brand began its production during the second half of the 1980s. Made in Seki, Japan, the S1 was created as a tribute to the famous knives used by members of the Military Assistance Command, Vietnam – Studies and Observations Group (MACV-SOG) during the Vietnam War.

It is important to distinguish the S1 from the original “sterile” military knives actually used operationally during the conflict: the commercial SOG model instead reproduces the commemorative configuration of the famous MACV-SOG Bowie, featuring the U.S. Army Special Forces crest on the blade together with the marking “VIETNAM 5th SPECIAL FORCES GROUP”. This strong historical identity, combined with the quality of Japanese manufacturing, has made it one of the most recognizable and sought-after vintage SOG knives among collectors.

Production was entrusted to Ichiro Hattori in Seki, one of the most important names in Japanese knifemaking. The substantial Bowie blade is made from SK-5 carbon steel, hardened to approximately 57-58 HRC, with the characteristic dark gun-blue finish combined with polished surfaces. The handle uses traditional stacked leather washers stabilized with epoxy resin, completed by a sturdy metal guard and pommel.

This example features the classic SOG Specialty Knives logo on one side of the ricasso and, on the opposite side, the markings “SEKI-JAPAN”, the Special Forces crest and the inscription “VIETNAM 5th SPECIAL FORCES GROUP”. It is also accompanied by its original black leather sheath, complete with sharpening stone pocket and a large Special Forces crest embossed on the lower section. The original period identification label is still present on the back of the sheath.

The example offered here comes from a private collection and has actually been used. The blade shows scratches, abrasions and surface marks, both on the blued and polished areas; the leather handle has developed a noticeable patina and shows wear consistent with its age. The original sheath is also heavily used, with leather wear, marks and widespread abrasions. Its condition should therefore be considered good in relation to its age and nature, but it should not be compared with a display-grade or NOS example.

These very characteristics tell the story of an authentic SOG S1 made in Seki: a knife that, regardless of its cosmetic condition, retains all the appeal of one of the founding models of the brand and today represents a particularly significant piece for a collection dedicated to American military knives and Japanese SOG production from the 1980s and 1990s.

Intended use: Military / Collection
Production type: Industrial
Model: S1 Bowie - Vietnam 5th Special Forces Group
Country of manufacture: Seki - Japan
Model production period: 1986 - 2005
Blade: SK-5 carbon steel
Hardness: 57-58 HRC
Blade finish: Gun-blue / polished
Blade profile: Bowie
Edge: Plain
Handle: Stacked leather washers stabilized with epoxy resin
Guard and pommel: Metal
Blade length: Approx. 159mm
Blade thickness: Approx. 7.1mm
Overall length: Approx. 273mm
Weight: Approx. 349g
Sheath: Original black leather sheath with sharpening stone pocket and Special Forces crest
Notes: Previously purchased and used knife, from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Like new
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, could be improved
* Marks on blade: None
* Marks on handle: None
* Box: Included
* Sheath: Included
* Manuals, Certificates, and Warranties: Included
* Inspected and Certified by our in-house laboratory

The SOG Forge FG01-L is a knife of extraordinary beauty and build quality, combining Japanese craftsmanship with modern production techniques.

The blade, forged using a hammering technique, features a unique texture that is one-of-a-kind for each piece. It is made of San Mai steel, with a VG-10 cutting edge and 420J2 outer layers, a combination that ensures an excellent balance between sharpness, edge retention, and durability.

The glass-reinforced nylon (GRN) handle is designed with perfectly contoured inserts to provide optimal balance and a secure, comfortable grip. The knife is complemented by an elegant premium leather sheath, enhanced with a colored fabric insert and a button closure.

Manufactured in Japan, the SOG Forge FG01-L evokes an era when honor and master craftsmanship were fundamental values. An object that is not merely a tool, but a true collector’s item destined to stand the test of time and be passed down from generation to generation.

Intended Use: Collectible / Sport

Production Type: Industrial
Country of Origin: Seki - Japan
Blade: SanMai laminated stainless steel with a VG-10 cutting edge and 420J2 outer layers, featuring a concave grind
Blade Finish: Hammered and Brut de Forge with a satin-finished portion of the cutting edge
Handle: Three-dimensionally shaped GRN (Glass Reinforced Nylon)
Blade Length: 160mm.
Blade thickness: 5 mm.
Overall length: 275 mm.
Weight: 290 g.
Sheath: Leather, with an insert of fine Japanese fabric, which varies from sheath to sheath
Packaging: Cardboard box with SOG logos
Notes: Knife from a private collection, previously purchased

KNIFE RETRIEVED FROM A PRIVATE COLLECTION
* Origin: Retrieved from a private collector, previously purchased
* Condition: Generally good, never used
* Commercial availability: Out of production in this configuration
* Sharpening: Factory edge
* Blade marks: A slight “polishing” mark on the left side
* Handle marks: None
* Box: Present, not in like-new condition
* Sheath: -
* Manuals, Certificates and Warranty: -
* Inspected and Certified by our internal laboratory

An iconic knife in Cold Steel’s production, known for its robustness and reliability. Compared to more recent versions, it stands out for the Ultra Lock™ blade locking system, which allows smoother opening than the more recently adopted Tri-Ad Lock™.

Intended use: Tactical / Military
Production type: Industrial
Blade: AUS-8A stainless steel
Blade finish: Tuff-Ex™, the specific name used by Cold Steel for its high-resistance Teflon-based coating
Blade manufacturing: Taiwan
Handle: Aluminum with Grivory insert
Blade length: 90 mm
Blade thickness: 3.5 mm
Closed length: 142 mm
Overall length: 232 mm
Balance: -
Weight: 198 g
Locking system: Ultra Lock™
Clip: Removable and reversible, stainless steel
Sheath: -
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: Available in different configurations
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

The Bad Medicine by Wander Tactical is a handcrafted knife designed to offer exceptional performance in any context. Manufactured in Italy with high-quality materials and meticulous workmanship, this tool is synonymous with strength and precision.

The D2 steel blade, treated with a raw finish, guarantees excellent wear resistance and reliable cutting. The ergonomic and durable G10 handle ensures a secure grip even in the most extreme conditions. 

Completed by a thermoformed Kydex sheath, compatible with the M.O.L.L.E. system, and accompanied by a certificate of guarantee and authenticity, this knife represents the perfect balance between traditional craftsmanship and modern innovation.

Intended use: All-round utility

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/61HRC
Blade finish: Raw
Handle: G10
Blade length: 150mm.
Blade thickness: 5mm.
Total length: 295mm.
Balance: advanced
Weight: 405g.
Sheath: thermoformed Kydex, with M.O.L.L.E. compatible belt loop.
Packaging: accompanied by a certificate of guarantee and authenticity.
Notes: knife entirely handmade, in every part.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, with only a small mark on the blade, no packaging or certificates
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: a small mark on the upper right side of the blade
* Marks on handle: None
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: Collection / Heavy Duty

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/61HRC with cryogenic tempering
Blade treatment: Raw
Handle: 2mm titanium scales with micarta grip
Blade length: 93mm.
Blade thickness: 5mm.
Closed length: 124mm.
Total length: 214mm.
Closed thickness: 24mm.
Weight: 193g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade
Closing: Rockers Arm 8.11
Clip: stonewashed titanium, removable and reversible
Packaging: Plastic case with Wander Tactical logos
Notes: Limited Edition, entirely handmade - knife previously purchased from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private collection, previously purchased, WITHOUT BOX

• Condition: good overall condition, never used

• Available on the market: still in production

• Sharpness: factory sharp

• Marks on blade: signs of slight surface oxidation on part of the blade as shown in the photos

• Marks on handle: none

• Box: -

• Sheath: in good overall condition

• Manuals, certificates and warranties: -

• Checked and certified by our in-house laboratory

The Cold Steel 1917 echoes the style of early 20th century military knives, particularly the Bowie and navy models used during the First World War. The design combines classic lines and modern materials, offering a wide, balanced blade ideal for powerful cuts and heavy-duty work. The hardwood handle and steel guard evoke the aesthetics of 1917 service weapons, reinterpreted with Cold Steel's usual robustness.

Use: Sporting / Collectible

Type of production: semi-handcrafted
Blade production: India
Blade: 1085 High Carbon steel
Blade treatment: burnishing
Handle: rosewood
Blade length: 305mm.
Blade thickness: 6.2mm.
Overall length: 440mm.
Balance: rear
Weight: 658g.
Sheath: leather and metal
Packaging: -
Notes:

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, NOS (new old stock), never used or removed from its original box
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present and perfect
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

Created in 1986 as the second official model of the newly formed SOG Specialty Knives, the S2 Trident is not just a knife, but a bridge between the past and the present. Designed in honor of the Navy SEALs and special units that operated in Vietnam, it draws direct inspiration from the legendary MACV-SOG knives of the 1960s, “sterilized” and lethal tools used in the most secret missions of the conflict.

Produced during the company's golden age in Seki, Japan, the Trident combines elegant lines and combat functionality: a thick, balanced AUS-8 steel Bowie blade with impeccable satin finish; ergonomic and durable black micarta stacked washer handle; and the engraved Navy SEAL symbol, a seal of belonging to an elite group. The leather sheath with sharpening stone completes a package designed for operators and collectors.

The S2 Trident is the most refined tribute to SOG's operational past: a homage to the military tradition of Vietnam reinterpreted with Japanese craftsmanship. Today, with a very high rarity index, it is considered one of the most sought-after pieces by military knife collectors, not only for its build quality, but for the history embodied in its blade.

Intended use: Military / Collection

Type of production: industrial
Country of production: Seki - Japan
Blade: AUS-8 stainless steel
Blade finish: Satin
Handle: Stacked micarta rings
Blade length: 160mm.
Blade thickness: 6 mm.
Total length: 278 mm.
Balance: rearward, 1 cm from the guard
Weight: 312 g.
Sheath: leather with pocket for sharpening stone (included)
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, a few imperceptible scratches on the titanium bolsters and a couple of small scratches on the satin finish of the blade
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: a couple of small scratches
* Marks on handle: a few imperceptible scratches on the titanium bolsters
* Box: Present and complete
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

The Cold Steel Hatamoto Custom Series is a high-end folding knife designed for those seeking excellence, performance, and design inspired by samurai tradition.

Produced in a limited edition between 2005 and 2010, this model combines Japanese craftsmanship with American ruggedness with a San Mai III blade, famous for its extraordinary sharpness and superior durability. The enhanced profile ensures effective penetration and superior strength, while the textured G-10 handle with titanium liners and bolsters provides comfort, a secure grip, and a refined aesthetic.

The solid liner lock ensures reliable closure, making this knife not only a collector's item but also a reliable tool for everyday use. Today, the Hatamoto Custom is a rare and coveted item, combining functionality and prestige in a single extraordinary knife.

Intended use: Sports / Collection

Type of production: industrial
Country of production: Japan
Blade: SanMai III laminated stainless steel with VG1 cutting edge
Blade finish: Satin
Handle: Titanium bolsters and scales with three-dimensionally machined G10 grips
Blade length: 100mm.
Blade thickness: 4mm.
Closed length: 125mm
Total length: 229mm.
Weight: 181g.
Lock system: Liner lock
Clip: Removable and reversible, mirror-polished stainless steel
Packaging: Aluminum box with Cold Steel logos and cardboard outer box with “Cold Steel Custom Series” logos
Notes: Previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Overall in good condition, a couple of small cosmetic marks of use on the tip of the blade
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: A couple of small cosmetic marks of use on the tip of the blade
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

The Demko Knives AD20.5 is a high-quality folder offered at a very competitive price. Fun to use and practical for everyday use, it owes much of its appeal to the innovative Shark Lock: a radical system that guarantees a secure blade lock, keeping your fingers safe at all times.

The mechanism is activated by pulling back the “fin” with your thumb or index finger, in a movement similar to that of a flipper opener. Once opened, the blade locks securely and the fin becomes a comfortable thumb rest, complete with jimping for superior control. Additional jimping on the back of the blade and an optional high grip further enhance the handling and versatility of this folding knife.

The AD20.5 represents the perfect balance that every EDC seeks to achieve, and will easily earn a permanent place in your pocket as soon as it enters your collection.

Intended use: Sports/Utility

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S45VN steel
Blade treatment: Stonewashed
Handle: Carbon fiber
Blade length: 82mm.
Blade thickness: 3.2mm.
Total length: 195mm.
Weight: 98g.
Closure: Shark-Lock
Clip: Stainless steel
Packaging: Transparent plastic box with Demko logos
Notes: Design by Andrew Demko - knife previously purchased from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used.
* Condition: Overall in very good condition, has a few small surface scratches on the blade from use.
* Commercially available: Available
* Sharpening: Factory.
* Marks on blade: Small surface scratches visible against the light
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sport/Utility

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN
Blade treatment: Satin finish
Handle: G10
Blade Length: 91mm.
Blade thickness: 3.8mm.
Total length: 223mm.
Weight: 202g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew Demko

KNIFE NOS FULL SET, NEW FROM STOCK
* Type: NOS Knife - New Old Stock - New from Stock
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: Minimal, given by time.
* Marks on handle: -
* Box: Present, original, like new
* Scabbard: Present, original, like new
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory.

The “Recon Tanto” is an iconic knife produced by Cold Steel, known for its reliability and sturdiness. First introduced in 1988, the model was designed to be a combat and survival knife with a design that combines functionality and durability.

Over the years, the “Recon Tanto” has been improved and updated, but has retained its distinctive character and functionality. It has become one of Cold Steel's most recognizable models, thanks to its ability to combine traditional design with modern innovation.

Intended use: collection/tactical/sporting

Type of production: industrial
Country of manufacture: Japan
Blade: stainless steel VG-1
Blade treatment: painting
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balance: advanced
Weight: 265g.
Sheath: Secur-Ex Thermoplastic
Packaging: cardboard box with Cold Steel logos
Notes: knife NOS - New Old Stock - New from stock

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private, previously purchased
* Condition: Like new
* Commercially available: Discontinued
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Scabbard: Original, like new
* Manuals, Certificates and Warranties: - -
* Checked and certified by our in-house laboratory

The Wander Tactical Barracuda is a knife with a tactical design but which lends itself well to a wide range of activities typical of a utility knife. With its D2 steel blade and Micarta handle, it offers the perfect balance between durability and comfort in use.

Intended use: Utility

Production type: Industrial
Country of manufacture: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: -
Handle: Micarta
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 205mm.
Weight: 225g. (304g. scabbard included)
Scabbard: Kydex, thermoformed, with tek-lok attachment
Packaging: -
Notes: -

KNIFE RETIRED FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private owner, previously purchased and no longer in production
• Condition: Overall in excellent condition
• Commercial Availability: NOT commercially available
• Edge: Original
• Blade marks: None
• Handle marks: None
• Box: -
• Sheath: -
• Manuals, Certificates, and Warranties: -
• Inspected and Certified: by our internal laboratory

The SOG Mini-Vulcan VL-02 is a high-quality folding knife designed to meet the needs of knife enthusiasts and demanding users. Engineered to combine durability, functionality, and refined design, this model is the perfect blend of advanced engineering and precision craftsmanship.

The VG-10 steel blade, extremely sharp and corrosion-resistant, ensures flawless performance both in outdoor settings and daily tasks. The patented Arc-Lock opening mechanism from SOG offers secure and smooth closure while ensuring speed and ease of use.

Compact and lightweight, the Mini-Vulcan is perfect for those seeking a versatile, reliable, and easy-to-carry knife. Whether you’re a collector, hiker, or professional, this knife will be an essential companion, ready to tackle the challenges of any day.

Intended Use: Sporting

Production Type: Industrial
Blade Production: Japan
Blade: VG-10 stainless steel
Blade Treatment: -
Handle: Zytel and steel liners
Blade Length: 78mm
Blade Thickness: 3mm
Closed Length: 109mm
Overall Length: 187mm
Closed Thickness: 20.3mm
Balance: -
Weight: 104g
Locking Mechanism: Arc Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: -
Notes: -

The SOG Winder II Heavy Duty Folding Knife (model SOG00009) exemplifies high quality and precision in knife making. With a blade length of 8.8 cm and a thickness of 4.7 mm, it is perfect for all kinds of tasks, providing excellent performance in cutting, slicing and piercing. The black textured Kraton handle provides an excellent grip, while the sturdy Lockback mechanism ensures safety during use.

The knife has an ambidextrous design, making it easy for both left- and right-handed people to use, and its compactness (11.4 cm when closed) makes it convenient to carry in a pocket or backpack. Made in Seki, Japan, a city with a long tradition of knife making, the Winder II is synonymous with high quality and craftsmanship.

Purchased in 1994 from the well-known Hoffritz cutlery chain in New York and now discontinued, it is a collector's item of great historical value. This knife, from a private collection, shows no signs of use, and is a prized piece for enthusiasts and collectors.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: In very good condition, with normal signs due to time
* Commercially available: 1994 knife - Discontinued model
* Sharpening: Factory.
* Marks on blade: Normal marks given by the opening and closing of the blade.
* Marks on handle: No.
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Collection

Production Type: Industrial
Country of Production: Japan
Blade: stainless steel AUS-8
Blade finish: satin finish
Handle: stainless steel and kraton
Blade length: 88mm.
Blade thickness: 4.7mm.
Length closed: 114mm.
Total length: 205mm.
Weight: 220g.
Closure: back-Lock
Notes: previously purchased 1994 knife, discontinued, in excellent condition

Exclusive product created in collaboration with the PDT YouTube channel - The Cutthroat's Park. This unique knife was actually used in a field test that you can view directly in this product sheet.

To make it even more special, we engraved Floriano's autograph and the PDT logo on the blade. The box of the knife was also autographed by Floriano making it a must-have collector's item.

KNIFE FROM A PRIVATE COLLECTION
* Provenance: PDT YouTube channel.
* Condition: Overall in very good condition.
* Commercially available: By catalog
* Sharpening: Factory sharpened, stropped by Floriano after use.
* Marks on blade: Small signs of concrete use.
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sport/Utility

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN
Blade treatment: Satin finish
Handle: OD Green G10
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: knife used in a YouTube video review by Floriano of PDT

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Conditions: in like-new condition
* Available on the market: No longer available
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: /
* Manuals, Certificates and Guarantees: Yes
* Checked and Certified by our internal laboratory

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: handcrafted blade and handle

Country of production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: titanium folders with handle in micarta
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 213mm.
Closed thickness: 17mm.
Balance: -
Weight: 150g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: Japan
Blade: VG10 stainless steel
Blade Finish: Black TiNi
Handle: Zytel with steel liners
Blade Length: 78mm.
Blade thickness: 3mm.
Length closed 109mm.
Total length: 187mm.
Thickness when closed: 20.3mm.
Weight: 104g.
Closure: Arc Lock
Clip: removable, stainless steel
Scabbard: -
Packaging: cardboard box with SOG logos
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: Small abrasions given by being placed in kydex sheath.
* Marks on handle: None
* Box: /
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: GunKote
Handle: Micarta
Blade length: 65mm.
Blade thickness: 6.5mm.
Total length: 132mm.
Balance: backward
Weight: 198g.
Sheath: made of Kydex, thermoformed
Packaging: -
Notes: previously purchased knife from a private collection

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: NOT in production
* Sharpness: Original sharpness
* Marks on blade: None
* Marks on handle: None
* Box: Original
* Sheath: /
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our internal laboratory

Intended use: Tactical/Sports

Blade: Teflon-coated 440A stainless steel
Blade production Taiwan
Handle: Zytel
Blade length: 100mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 230mm.
Balancing: -
Weight: 155g.
Closure: Liner Lock
Clip: removable, stainless steel
Sheath: -
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: overall in very good condition
* Commercially available handcrafted version no longer commercially available.
* Sharpening: factory sharpened, never resharpened
* Marks on blade: none
* Marks on handle: a few tiny little marks on carbon
* Box: present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Utility / Collection

Production type: MidTech
Country of Manufacture: USA (Wampum, Pennsylvania)
Blade: CPM-CruWear 63/64HRC steel
Blade treatment: Stonewashed
Handle: 5mm thick Carbon Fiber with stainless steel top folder
Blade length: 95mm.
Blade thickness: 4.5mm.
Total length: 220mm.
Weight: 174g.
Closure: Shark-Lock
Clip: stainless steel
Packaging: cardboard box with Demko logos
Notes: previously purchased knife from private collection - rare semi-crafted version (MidTech) personally made by the knife maker in his own workshops in Wampum, discontinued and no longer commercially available

KNIFE NOS FULL SET, NEW FROM STOCK
* Type: 1995 NOS knife - New Old Stock - New from stock
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory.
* Marks on blade: Given by time
* Marks on handle: Given by time.
* Box: Present, original, in very good condition
* Scabbard: Present, original, in very good condition, with small marks given by time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: collection / tactical / sporting

Type of production: Industrial
Country of Production: USA
Blade: Carbon V steel
Blade treatment: varnishing
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balance: advanced
Weight: 265g.
Sheath: Cordura
Packaging: cardboard box with Cold Steel logos and "Made in USA" logos.
Notes: knife from 1995 NOS - New Old Stock - New from stock

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

SERIAL NUMBER 0231

* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Limited series, discontinued
* Sharpening: Factory
* Marks on blade: Slight, uneven treatment in places (factory, not due to wear)
* Marks on handle: No
* Box: Present and original, WITH AUTOGRAPH SIGNATURE OF LYNN THOMPSON
* Scabbard: Not present
* Manuals, Certificates and Warranties: no
* Checked and certified by our in-house laboratory

Intended use: Sporting/EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel Carpenter CTS XHP Alloy 59/60HRC
Blade treatment: DLC
Handle: Griv-Ex
Blade length: 135mm.
Blade thickness: 3.6mm.
Length closed: 170mm.
Total length: 304mm.
Weight: 208g.
Closure: Back Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with Cold Steel logos
Notes: Numbered and limited edition (serial no. 0231) with signature of "Lynn C. Thompson" laser engraved on the blade and in pen on the packaging

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

* Type: Previously Purchased
* Condition: in like-new condition with perfect original box
* Commercially available Discontinued since 2013
* Sharpening: Original edge
* Marks on blade: no
* Marks on handle: no
* Box: yes
* Scabbard: no
* Manuals, Certificates and Guarantees: no
* Checked and certified by our in-house laboratory

Intended use: Sporting / Utility

Production type: Industrial
Country of manufacture: Japan
Blade: SANMAI stainless steel
Blade finish: Satin finish
Handle: Micarta and Titanium
Blade length: 115mm
Blade thickness: 4mm.
Total length: 235mm.
Weight: 152g.
Closure: Liner Lock
Clip: Stainless steel
Packaging: aluminium box with Cold Steel logos
Notes: -

For almost a decade, Cold Steel® offered a wicked-looking little boot knife called the Culloden®. It was based on the traditional Scottish 'black knife' or 'Skean Dhu' as it is more commonly called in Gaelic, the ancient language of Scotland.

The Caledonian Edge™ features a number of modern variations and refinements over its predecessor. The blade is made of a virtually unbreakable San Mai III® construction and, like the original Skean Dhu, features a thin, sharp point, as sharp as the proverbial needle. 

The traditional tang seen on the Skean Dhu of yesteryear has been retained and provides an aggressive, non-slip platform for the thumb and forefinger, allowing for better control when using the blade to cut or pierce.

The handle of the Caledonian Edge™ has a profile that hugs the palm of the hand and a relatively thin cross-section that enhances its qualities. It is flat enough not to roll or twist in the palm of the hand, yet comfortable enough to accommodate a wide range of grip styles. A perfect blend of strength and beauty, it features a mirror-polished black Micarta superstructure and titanium bolsters.ne handed opening.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

The first and original Tanto "Made in Japan", here in a 1980's version with a San Mai steel blade, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto.

* Type: Previously Purchased
* Condition: very good, never used, some light surface marks (visible against the light)
* Commercially available Out of production
* Sharpening: Original wire
* Marks on blade: yes, superficial
* Marks on handle: no
* Box: no
* Scabbard: Present - Original, in good general condition, some marks present
* Manuals, Certificates and Warranties: no
* Checked and certified by our internal laboratory

Intended use: Collection

Type of production: Industrial
Country of manufacture: Japan
Blade: San Mai steel - Made in Japan
Blade treatment: satin finish
Handle: Kraton with brass guard and pommel
Blade length: 145m
Blade thickness: 4.7mm.
Total length: 285mm.
Balance: recessed
Weight: 268g.
Sheath: Black leather, branded "Japan".
Packaging: without original box
Notes: Knife from a private collection, first series, produced in the 1980s and out of production since the 1990s, overall in very good condition.

Intended Use: Collection / Heavy Duty

Production type: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Black Blood
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total length: 214mm.
Thickness when closed: 21mm.
Weight: 186g.
Opening: Carson Flipper system / Ambidextrous opening pins on blade.
Closure: Rockers Arm 8.11
Clip: stone washed titanium, removable and reversible
Packaging: plastic pouch with Wander Tactical logos
Notes: Limited Edition, produced entirely by hand, each example differs from the previous one in aesthetic finishes

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Discontinued, model dating back to 2019
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: WT original packaging
* Sheath: -
* Manuals, Certificates and Warranties: WT certificate
* Checked and certified by our internal laboratory

Intended use: Collection / Heavy Duty

Type of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Closed length: 124mm.
Total length: 214mm.
Thick when closed: 21mm.
Weight: 186g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade
Closing: Rockers Arm 8.11
Clip: in stone washed titanium, removable and reversible
Packaging: Plastic case with Wander Tactical logos
Notes: Limited Edition, produced entirely by hand, each piece differs from the previous one in aesthetic finishes

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available: Discontinued, replaced by new variants in different steels
* Sharpening: Factory sharpened
* Marks on blade: No
* Marks on handle: No
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: - 
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / Collection 

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade treatment: Microbead blasted
Handle: Duralumin A7075 
Blade length: 152mm.
Blade thickness: 4mm.
Length closed: 178mm.
Total length: 330mm.
Thickness when closed: 22mm.
Weight: 258g.
Closure: LinerLock type
Clip: removable, painted stainless steel
Notes: discontinued knife, like new, withdrawn from private collection

Knife withdrawn from a private collection - In like new condition - Comes with original box - Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Blade treatment: -
Handle: Aluminum 7075 and G-10
Blade length: 195mm.
Blade thickness: 4mm.
Total length: 425mm.
Thick when closed: -
Balancing: -
Weight: 425g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note: -

Knife withdrawn from a private collection - Limited edition production in Japanese CoS steel in SanMai dating back to 2018 and no longer available - In like new condition, no marks on the blade (never cut, never resharpened) or on the handle. Supplied with handmade Kydex sheath and Wander Tactical certificate - Checked and certified by our in-house Coltelleria Collini laboratory.

In collaboration with Wander Tactical we have decided to propose their new neck knife, the Raptor model, in an exclusive version with a satin blade that uses the famous Japanese San Mai steel produced by Takefu Steel. Specifically we used, for the central plate, the CoS at 61.5HRC (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: Neck Knife / Collection

Type of production: Artisan
Production Lama: Italy
Blade: integral, in Japanese laminated stainless steel (San Mai) with cutting edge in CoS at 61.5HRC with cryogenic hardening
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: in Kydex, thermoformed, with lanyard for Neck Knife use
Packaging: -
Notes: Each knife is unique and handcrafted

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Knife from a private collection - The first and original Tanto "Made in Japan", here in the second series from 1986, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto - Overall in very good condition, with no particular scratches, marks or abrasions on blade and handle; a few small marks of time on scabbard - Product still has original factory sharpening, although it would need a brightening-no signs of wear anyway - Supplied with its own original leather scabbard marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: Japan
Blade: made of "Cold Steel's 400 Series Stainless" steel (presumably 420 stainless)
Blade treatment: satin finish
Handle: made of Kraton with brass guard and pommel
Blade length: 145m.
Blade thickness: 5mm.
Total length: 285mm.
Balance: backward
Weight: 259g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.

Knife from a private collection - First series, first generation, the first and original "Made in USA" Trailmaster from 1988 - Overall in good condition, shows small signs of oxidation on the blade and some minor signs of time on the leather sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath, but lacking box and manuals - Checked and certified by our in-house lab.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: USA
Blade: Carbon V steel
Blade treatment: satin finish
Handle: kraton and brass
Blade length: 240mm.
Blade thickness: 8mm.
Total length: 370mm.
Balance: advanced
Weight: 515g.
Sheath: black leather
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988, overall in good condition.

Knife from a private collection - The first and original Magnum Tanto "Made in Japan" from 1988, progenitor of the modern generation continued with the Magnum Tanto II in 1990 - Overall in very good condition, with no particular scratches, marks or abrasions on blade, handle and sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: Japan
Blade: stainless steel AUS-8A
Blade treatment: satin finish
Handle: kraton
Blade length: 230mm.
Blade thickness: 5mm.
Total length: 370mm.
Balance: advanced
Weight: 330g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.

Knife withdrawn from private collection - Overall in excellent condition, still with factory sharpening, a few small signs of oxidation - Distinguished by Copper Brush finish, not usual to find on Wander models and very rare ivory white G-10 handle - Checked and certified by our in-house laboratory.

Type of Production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Copper Brush
Handle: G-10
Blade Length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balance: backward
Weight: 605g.
Sheath: made of Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Notes: supplied with certificate of authenticity and warranty dated 12/20/2020 - knife withdrawn from private collection, overall in excellent condition

Absolutely like new - Comes from a private collection - Unique item made in 2020, prototype, does not correspond to any standard model of Wander Tactical production - Made entirely by hand.

Use: Collection / Utility / Hunting

Production type: Handcrafted
Country of Production: Italy
Blade: integral, japanese rolled steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
Blade finish: satin finish 
Handle: Paracord
Blade length: 90mm.
Blade thickness: 6.65mm.
Total length: 200mm.
Balance: backward
Weight: 180g.
Sheath: in kydex
Package: Certificate of authenticity
Notes: Unique piece of 2020 - Prototype: it doesn't correspond to any standard model of Wander Tactical production - Entirely hand made - Absolutely like new, coming from a private collection,

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Coltelleria Collini, we decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically we have used the carbonaceous V-Toku2 at 62/63HRC for the central plate and the stainless SUS410 for the two external plates, in order to guarantee a very high cutting capacity, penetration and edge holding together with an easy resharpening and maintenance. At the same time the blade has a remarkable resistance to corrosion and an important increase of resilience given by the type of extreme steel and the laminated structure.

As in the ancient swords of the Japanese Samurai.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: It is made of different types of metals alloyed together to create a composite that contains and intensifies the strengths of the metals taken individually:

- Longer cutting edge life
thanks to the use of high quality steels with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performance decidedly superior to those achieved with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For further information: collinisteel

Knife withdrawn from a private collection in excellent condition, re-sharpened - Complete with original certificate - Checked and certified by our in-house Coltelleria Collini laboratory.

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Row Finish
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balancing: set back
Weight: 605g.
Sheath: in Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Note:

Knife from a private collection - The original Recon Tanto "Made in USA" of the '90s, progenitor of the current generation - Absolutely like new, never taken out of the box, still with the original factory grease on the blade, sheath without signs of use and knife insertion - Complete, with original box and Cold Steel warranty - Checked and certified by our internal laboratory.

Intended use: collection / tactical / sporting

Production type: Industrial
Country of Production: USA
Blade: Carbon V steel
Blade treatment: varnishing
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balancing: advanced
Weight: 265g.
Scabbard: Simil-leather
Package: Cardboard box with Cold Steel and "Made in USA" logos
Notes: Knife from a private collection - Made in the late 90's (presumably 1997/1998) - Absolutely like new

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: In like new condition
* Commercially available: No
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Yes original
* Manuals, Certificates and Guarantees: Yes
* Checked and Certified by our internal laboratory

Intended use: Sports
Type of production: Industrial
Blade production: Japan
Blade: laminated stainless steel with VG-10 cutting edge
Blade Treatment: -
Handle: Zytel and steel liners
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed length 123mm.
Total length: 210mm.
Closed thickness: 21.5mm.
Balancing: -
Weight: 144g.
Closure: Arc Lock
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with SOG logos
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, unused
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard:/
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Hunting / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-1
Blade treatment: Satin finish
Handle: Thermorun
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 127mm.
Total length: 216mm.
Weight: 122g.
Closure: Back Lock
Clip: stainless steel, removable
Packaging: cardboard box with Cold Steel logos
Notes: discontinued item, like new, from private collection

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased - knife no longer in production since
* Condition: in excellent condition, like new
* Commercially available: difficult to find
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original Sog box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: Japan
Blade: VG-10 stainless steel
Blade treatment: -
Handle: GRN
Blade length: 74mm.
Blade thickness: 2.5mm.
Closed length: 114mm.
Total length: 178mm.
Thick when closed: 7mm.
Balancing: -
Weight: 113g.
Closure: Arc-Lock Pendulum
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with SOG logos
Note: -