Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Overall in good condition, a couple of small cosmetic marks of use on the tip of the blade
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: A couple of small cosmetic marks of use on the tip of the blade
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

The Demko Knives AD20.5 is a high-quality folder offered at a very competitive price. Fun to use and practical for everyday use, it owes much of its appeal to the innovative Shark Lock: a radical system that guarantees a secure blade lock, keeping your fingers safe at all times.

The mechanism is activated by pulling back the “fin” with your thumb or index finger, in a movement similar to that of a flipper opener. Once opened, the blade locks securely and the fin becomes a comfortable thumb rest, complete with jimping for superior control. Additional jimping on the back of the blade and an optional high grip further enhance the handling and versatility of this folding knife.

The AD20.5 represents the perfect balance that every EDC seeks to achieve, and will easily earn a permanent place in your pocket as soon as it enters your collection.

Intended use: Sports/Utility

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S45VN steel
Blade treatment: Stonewashed
Handle: Carbon fiber
Blade length: 82mm.
Blade thickness: 3.2mm.
Total length: 195mm.
Weight: 98g.
Closure: Shark-Lock
Clip: Stainless steel
Packaging: Transparent plastic box with Demko logos
Notes: Design by Andrew Demko - knife previously purchased from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: Collected from a private individual, previously purchased.
* Condition: Never used, absolutely like new
* Commercially available: Still in production, hard to find
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Marketed by manufacturer without a box
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

This replica of Major Von Tempsky's 6.5” Bowie knife is inspired by the design of the knife he created and assigned to his company of Forest Rangers in 1863.

Gustavus Ferdinand von Tempsky (1828-1868) was a German-born adventurer, soldier and artist, known for his role in the New Zealand Wars and for his leadership among the Forest Rangers. His adventurous life and courage made him a legendary figure, particularly in the context of battles between European settlers and Māori peoples.

He learned the advantages of Bowie knife fighting in California during his stint as a prospector, where he had acquired an excellent American-made knife; once he arrived in New Zealand and found himself in charge of Forest Ranger Company No. 2 with the rank of major, he had about 30 Bowie knives made for his men according to his personal design by a blacksmith in Shortland St. Auckland. The Forest Rangers were an elite corps of mounted scouts employed by the colonial government between August 1863 and October 1867 during the New Zealand Wars.

At the time, knives were made of wagon spring steel, one of the few steels available to blacksmiths in Auckland in 1863, and Von Tempsky, an experienced fighter, taught his men the use of the Bowie knife in hand-to-hand combat. The knife was used to defend against enemy blows while a pistol was usually held in the other hand.

In addition to combat, Bowie knives were used to open paths in the forest, dig defensive positions, cut firewood, and for general use while camping.

Use: Heavy Duty / Collection

Type of production: Handcrafted
Country of manufacture: New Zealand
Blade: full tang made of 8670 spring steel, high carbon content
Blade Finish: Direct heat treatment, which goes to create special color play on the blade
Handle: Wenge wood with carbon steel through-guard
Blade length: 165mm.
Blade thickness: 6mm.
Total length: 283mm.
Balance: advanced
Weight: 600g.
Sheath: leather
Packaging: unwrapped, sold certificate of warranty and authenticity
Notes: previously purchased knife, never used, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Never used, absolutely like new
* Commercially available: Still in production, hard to find
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Marketed by manufacturer without a box
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

This replica of Major Von Tempsky's 11” Bowie knife is inspired by the design of the knife he created and assigned to his company of Forest Rangers in 1863.

Gustavus Ferdinand von Tempsky (1828-1868) was a German-born adventurer, soldier and artist, known for his role in the New Zealand Wars and for his leadership among the Forest Rangers. His adventurous life and courage made him a legendary figure, particularly in the context of battles between European settlers and Māori peoples.

He learned the advantages of Bowie knife fighting in California during his stint as a prospector, where he had acquired an excellent American-made knife; once he arrived in New Zealand and found himself in charge of Forest Ranger Company No. 2 with the rank of major, he had about 30 Bowie knives made for his men according to his personal design by a blacksmith in Shortland St. Auckland. The Forest Rangers were an elite corps of mounted scouts employed by the colonial government between August 1863 and October 1867 during the New Zealand Wars.

At the time, knives were made of wagon spring steel, one of the few steels available to blacksmiths in Auckland in 1863, and Von Tempsky, an experienced fighter, taught his men the use of the Bowie knife in hand-to-hand combat. The knife was used to defend against enemy blows while a pistol was usually held in the other hand.

In addition to combat, Bowie knives were used to open paths in the forest, dig defensive positions, cut firewood, and for general use while camping.

Use: Heavy Duty / Collection

Type of production: Handcrafted
Country of manufacture: New Zealand
Blade: full tang made of 8670 spring steel, high carbon content
Blade Finish: Direct heat treatment, which goes to create special color play on the blade
Handle: Wenge wood with S-shaped carbon steel through-guard
Blade length: 280mm.
Blade thickness: 7mm.
Total length: 425mm.
Balance: advanced
Weight: 925g.
Sheath: leather
Packaging: unwrapped, sold certificate of warranty and authenticity
Notes: previously purchased knife, never used, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: overall in very good condition
* Commercially available handcrafted version no longer commercially available.
* Sharpening: factory sharpened, never resharpened
* Marks on blade: none
* Marks on handle: a few tiny little marks on carbon
* Box: present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Utility / Collection

Production type: MidTech
Country of Manufacture: USA (Wampum, Pennsylvania)
Blade: CPM-CruWear 63/64HRC steel
Blade treatment: Stonewashed
Handle: 5mm thick Carbon Fiber with stainless steel top folder
Blade length: 95mm.
Blade thickness: 4.5mm.
Total length: 220mm.
Weight: 174g.
Closure: Shark-Lock
Clip: stainless steel
Packaging: cardboard box with Demko logos
Notes: previously purchased knife from private collection - rare semi-crafted version (MidTech) personally made by the knife maker in his own workshops in Wampum, discontinued and no longer commercially available

KNIFE TAKEN FROM PRIVATE COLLECTION

* Type: Previously Purchased
* Condition: very good, mirror polished blade with a few slight surface marks (visible against the light) from being inserted in the sheath - a few dots of oxidation on brass guard and pommel
* Commercially available Out of production
* Sharpening: Original edge
* Marks on blade: yes, light and superficial
* Marks on handle: no
* Box: no
* Scabbard: Present - Original, in good condition
* Manuals, Certificates and Warranties: no
* Checked and certified by our in-house laboratory

Intended Use: Utility/Hunting

Production type: Industrial
Country of manufacture: Germany - Solingen
Blade: Stainless steel 440C
Blade finish: Mirror polished
Handle: Briar
Blade length: 123mm. (edge 112mm.)
Blade thickness: 4.4mm.
Total length: 230mm.
Weight: 162g.
Sheath: leather
Packaging: -
Notes: -

Tomahawk withdrawn from private collection, no longer in production by Boker - In excellent condition, no signs of wear, still has the original factory sharpening - Checked and certified by our in-house laboratory.

Intended Use: Tactical/Sporting

Production type: Industrial
Country of manufacture: Taiwan
Blade: 440C stainless steel
Blade treatment: stonewashed
Handle: G-10
Blade length: 55mm.
Blade thickness: 6.2mm.
Total length: 230mm.
Weight: 576g.
Sheath: Kydex
Packaging: Cardboard box with Boker Plus logos
Notes: Design by Dj Urbanowsky

* Type: Previously purchased and used
* Condition: Like new
* Commercially available: yes
* Sharpness: Factory
* Marks on blade: No
* Marks on handle: No
* Packaging: Yes
* Sheath: /
* Manuals, Certificates and Warranties: yes
* Checked and Certified by our internal laboratory

Intended use: EDC / Sports

Type of production: Industrial
Country of manufacture: Taiwan
Blade: VG-10 stainless steel
Blade treatment: blackwash
Handle: titanium
Blade length: 47mm.
Blade thickness: 1.7mm.
Total length: 115mm.
Weight: 31g.
Clip: titanium
Closure: Frame lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Brad Zinker

While we've seen plenty of Boker products over the years, resourceful knife makers continue to find ways to surprise us. For example, Brad Zinker from Florida with his Urban Trapper, one of the thinnest profile titanium framelocks we've ever experienced. With just 8mm grip thickness (without clip), the term "slim" only inadequately describes the Urban Trapper for its usable size.

The large holes and titanium transform the Urban Trapper into a real featherweight of just 48 g that can be carried extremely comfortably both in a suit pocket and in light summer trousers. Considering the overall minimalist design of the knife, the size of the flipper is equally reserved.

When used, it still impresses with its outstanding functionality and reliably opens the blade on VG-10 ball bearings. The blade shape of this classic trapper pocket knife, widely distributed in the United States and worn for many years by Brad Zinker, was the inspiration for this unusual piece.