Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.

In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: knife from 1992 in perfect mechanical condition and excellent aesthetic condition, showing only a few small scratches on the steel heads
* Available on the market: Out of production and difficult to find, model marketed in the 1990s
* Sharpness: Factory sharp
* Marks on blade: none
* Marks on handle: very small scratches/hairlines on the steel heads
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

The Buck 551, often known as “King Charles II,” is a vintage folding knife produced in the United States between the early and mid-1990s in limited quantities.

Appreciated by collectors and enthusiasts of historic American knives, it is a more compact version than other Buck models from the same period, designed for everyday use but with careful workmanship and reliable materials. 

The 420HC stainless steel blade offers good edge retention and corrosion resistance, while the laminated wood scales with polished steel bolsters give it a classic, understated look that echoes the style of traditional Buck knives.

Intended use: EDC / Sports / Hunting

Type of production: industrial
Blade: 420HC stainless steel
Blade finish: Satin
Country of manufacture: USA
Handle: steel bolsters and laminated wood
Blade length: 70mm.
Blade thickness: 2mm.
Closed length: 98mm.
Overall length: 168mm.
Weight: 70g.
Locking system: Back lock
Clip: -
Packaging: -
Notes: vintage knife from 1992, previously purchased, from a private collection

KNIFE FROM A PRIVATE COLLECTION
* Type: Previously purchased knife from a private collection
* Condition: Like new
* Availability: Rare and hard to find
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Original
* Sheath: In excellent, complete condition
* Manuals, Certificates & Warranty: Ka-Bar
Inspected and certified by our in-house laboratory

The KA-BAR BK72 represents the ultimate evolution of a survival knife icon. As the heir to the famous Becker BK2/BK22, it retains their toughness and reliability while enhancing performance thanks to the premium CPM S35VN steel. Built full tang with a 6.35 mm thick blade, it offers outstanding strength and optimal handling.

The black micarta handle ensures a firm grip in any condition, while the available finishes — stonewashed or black DLC coating — provide a modern and functional aesthetic. A knife that combines durability, precision, and style, perfect for outdoor, survival, and professional use.

Intended use: survival / outdoor / heavy-duty
Production type: exclusive Knivesandtools edition (KA-BAR–Knivesandtools collaboration)
Country of origin: USA
Blade: CPM S35VN steel (full tang, 6.35 mm thick)
Blade finish: stonewashed (KABK72) or black DLC coating (KABK72BK)
Handle: black micarta
Blade length: approx. 13.2 cm
Blade thickness: 6.35 mm
Closed length: 107 mm
Overall length: approx. 270 mm
Closed thickness: estimated between 12–15 mm
Weight: approx. 435 g
Locking mechanism: fixed blade, no locking system
Clip: none (includes kydex sheath)
Packaging: original box
Notes: hardness approx. 58 HRC

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: In excellent condition, shows a scratch of about 2.5 cm on the blade
* Commercial Availability: Hard to find
* Sharpening: Factory edge, can be improved
* Blade Marks: shows a scratch of about 2.5 cm on the blade
* Handle Marks: -
* Box: -
* Sheath: in excellent condition, complete
* Manuals, Certificates and Warranties: -
Checked and Certified by our in-house workshop

The Buck 192 Vanguard is a premium-quality hunting knife, made in the USA and designed to deliver outstanding performance in all outdoor situations. The ergonomic handle made of fine wood with brass fittings gives the knife a classic and sturdy appearance, while the drop point blade in 420HC stainless steel ensures a reliable and long-lasting cut.

192 - with hyphen: this model features the marking “192-”, a production detail found on Buck knives made in the 1990s. This makes the knife particularly interesting for collectors and fans of the American brand.

Blade length: 102 mm
Total length: 216 mm
Blade material: 420HC stainless steel
Handle: fine wood with brass bolsters and scales
Sheath: high-quality brown leather
Production: Made in USA

This knife is ideal for hunting, hiking, camping, or as a collectible item. The Buck 192 Vanguard combines functionality, design, and reliability in a single tool appreciated worldwide.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: 2015 specimen, like new
* Commercially available: Still in production
* Sharpening: Factory sharpened
* Marks on blade: No
* Marks on handle: None
* Box: Absent
* Scabbard: Present
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: All Rounder Utility

Production type: Industrial
Country of Production: USA
Blade: 420HC stainless steel engraved
Blade finish: mirror polish
Handle: wood and brass
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 220mm.
Thickness when closed: 16mm.
Weight: 205g.
Closure: Back Lock
Sheath: nylon sheath
Packaging: not present
Notes: previously purchased knife from private collection

Buck 560BT Black Nitride XLTi Titanium is a collectible folding knife manufactured in the United States in 1993. This distinctive model combines high-quality materials with functional design, making it a sought-after piece by both collectors and knife enthusiasts.

This item comes from a private collection and is in excellent condition, featuring a flawless blade and a perfectly preserved handle. Supplied with its original packaging and leather sheath, it represents a rare opportunity for true Buck aficionados.

Type: Previously Purchased
Condition: Excellent
Availability: Discontinued since the late '90s
Sharpening: Factory edge
Blade marks: None
Handle marks: None
Packaging: Complete, original cardboard box with manufacturer logos
Sheath: Cordura
Manuals, Certificates and Warranties: Warranty certificates included
Inspected and Certified: By our in-house lab

Intended use: Collection
Production type: Industrial
Country of manufacture: USA
Blade: 425M stainless steel
Blade finish: Black nitride
Handle: Titanium with black nitride finish
Blade length: 95 mm
Blade thickness: Not specified
Closed length: 107 mm
Total length: 219 mm
Closed thickness: Not specified
Weight: Not specified
Locking mechanism: Lockback
Clip: Not present; supplied with original Buck nylon sheath
Packaging: Original Buck box
Notes: Limited edition 1993; titanium handle with black nitride finish; includes original Buck nylon sheath

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of the box
* Commercially available: Still in catalog, but difficult to find.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Hunting/Light Utility

Production Type: Industrial
Country of Production: USA
Blade: stainless steel CPM-S35VN hardened by BOS
Blade finish: satin-finished
Handle: Micarta, with aluminum pommel and guard
Blade length: 152mm.
Blade thickness: 4.4mm.
Total length: 267mm.
Weight: 300g.
Scabbard: leather
Packaging: cardboard box with Buck logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new
* Commercially available: found.
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

The Compadre Camp Knife is the perfect ally for those who love adventure. With its 5160 steel blade and cobalt coating, it cuts with precision and stands up to any challenge. The sturdy and stylish Micarta handle provides a secure grip, making it ideal for the outdoors.

Intended Use: Bushcraft / Outdoor

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, made of 5160 steel at 57/58HRC hardened by BOS
Blade finish: Cobalt Cerakote
Handle: Natural Canvas Micarta
Blade length: 114mm.
Blade thickness: 3.8mm.
Total length: 241mm.
Weight: 199g.
Sheath: black leather
Packaging: cardboard box with Buck logos
Notes: previously purchased knife from private collection

COUTEAU DE RETRAITE PROVENANT D'UNE COLLECTION PRIVÉE - Modèle Buck 120 datant des années 90
* Type : déjà acheté
* Etat : en excellent état, comme neuf
* Disponible dans le commerce : disponible dans le commerce dans les versions les plus récentes
* Affûtage : Original
* Marques sur la lame : non
* Marques sur le manche : non
* Boîte : sans boîte
* Gaine : gaine en cuir noir d'origine
* Manuels, certificats et garanties : -
* Contrôlé et certifié par notre laboratoire interne

Utilisation prévue : Tactique

Type de production : Industrielle
Production Lama : États-Unis
Lame : acier inoxydable 420HC
Traitement de la lame : -
Manche : en Polymères
Longueur de la lame : 185 mm.
Épaisseur de la lame : 4,5 mm.
Longueur fermée : -
Longueur totale : 300 mm.
Epaisse fermée : -
Équilibrage : -
Poids : 228 grammes.
Fermeture: -
Agrafe: -
Fourreau : en cuir noir
Emballage: -
Noter: -

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory

Intended use: Sports / EDC

Type of production: Industrial
Blade production: USA
Blade: 420HC stainless steel
Handle: G-10
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 112mm.
Total length: 190mm.
Closed thickness: 11mm.
Balancing: -
Weight: 122g.
Closure: Liner Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging:
Notes: Concave sharpening - opening via Carson Flipper system