Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows some barely noticeable signs of aging on the Zytel handle and a couple of small spots of oxidation on the tip of the blade (right side), which in no way compromise its practical use
* Commercially available: Discontinued
* Sharpness: Factory-sharpened; could be improved
* Marks on blade: A couple of small spots of oxidation on the tip of the blade, on the right side, which in no way compromise its practical use
* Marks on handle: A few barely noticeable signs of aging
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

Intended use: sports / collectible

Production type: Industrial
Country of manufacture: Japan
Blade: VG-10 stainless steel
Blade finish: Satin
Handle: Zytel, with stainless steel liners
Blade length: 90 mm.
Blade thickness: 4 mm.
Closed length: 120 mm.
Overall length: 210 mm.
Thickness when closed: 20 mm.
Weight: 135 g.
Closure: Arc-Lock (crossbar lock)
Clip: removable, stainless steel
Packaging: -
Notes: Previously purchased knife, from a private collection

PREVIOUSLY PURCHASED AND USED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased and used
* Condition: Good overall condition, with evident signs of age and use
* Commercial availability: Discontinued
* Sharpening: Resharpened
* Marks on blade: Present, with scratches, abrasions and surface dulling consistent with age and use
* Marks on handle: Present, with natural patina and signs of use on the stacked leather washers
* Box: -
* Sheath: Present, original leather sheath, heavily used and showing signs of age
* Manuals, Certificates and Warranties: -
* Inspected and Certified by our in-house laboratory

The SOG S1 Bowie Vietnam 5th Special Forces Group is one of the most representative knives in the history of SOG Specialty Knives and the model with which the American brand began its production during the second half of the 1980s. Made in Seki, Japan, the S1 was created as a tribute to the famous knives used by members of the Military Assistance Command, Vietnam – Studies and Observations Group (MACV-SOG) during the Vietnam War.

It is important to distinguish the S1 from the original “sterile” military knives actually used operationally during the conflict: the commercial SOG model instead reproduces the commemorative configuration of the famous MACV-SOG Bowie, featuring the U.S. Army Special Forces crest on the blade together with the marking “VIETNAM 5th SPECIAL FORCES GROUP”. This strong historical identity, combined with the quality of Japanese manufacturing, has made it one of the most recognizable and sought-after vintage SOG knives among collectors.

Production was entrusted to Ichiro Hattori in Seki, one of the most important names in Japanese knifemaking. The substantial Bowie blade is made from SK-5 carbon steel, hardened to approximately 57-58 HRC, with the characteristic dark gun-blue finish combined with polished surfaces. The handle uses traditional stacked leather washers stabilized with epoxy resin, completed by a sturdy metal guard and pommel.

This example features the classic SOG Specialty Knives logo on one side of the ricasso and, on the opposite side, the markings “SEKI-JAPAN”, the Special Forces crest and the inscription “VIETNAM 5th SPECIAL FORCES GROUP”. It is also accompanied by its original black leather sheath, complete with sharpening stone pocket and a large Special Forces crest embossed on the lower section. The original period identification label is still present on the back of the sheath.

The example offered here comes from a private collection and has actually been used. The blade shows scratches, abrasions and surface marks, both on the blued and polished areas; the leather handle has developed a noticeable patina and shows wear consistent with its age. The original sheath is also heavily used, with leather wear, marks and widespread abrasions. Its condition should therefore be considered good in relation to its age and nature, but it should not be compared with a display-grade or NOS example.

These very characteristics tell the story of an authentic SOG S1 made in Seki: a knife that, regardless of its cosmetic condition, retains all the appeal of one of the founding models of the brand and today represents a particularly significant piece for a collection dedicated to American military knives and Japanese SOG production from the 1980s and 1990s.

Intended use: Military / Collection
Production type: Industrial
Model: S1 Bowie - Vietnam 5th Special Forces Group
Country of manufacture: Seki - Japan
Model production period: 1986 - 2005
Blade: SK-5 carbon steel
Hardness: 57-58 HRC
Blade finish: Gun-blue / polished
Blade profile: Bowie
Edge: Plain
Handle: Stacked leather washers stabilized with epoxy resin
Guard and pommel: Metal
Blade length: Approx. 159mm
Blade thickness: Approx. 7.1mm
Overall length: Approx. 273mm
Weight: Approx. 349g
Sheath: Original black leather sheath with sharpening stone pocket and Special Forces crest
Notes: Previously purchased and used knife, from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Like new
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, could be improved
* Marks on blade: None
* Marks on handle: None
* Box: Included
* Sheath: Included
* Manuals, Certificates, and Warranties: Included
* Inspected and Certified by our in-house laboratory

The SOG Forge FG01-L is a knife of extraordinary beauty and build quality, combining Japanese craftsmanship with modern production techniques.

The blade, forged using a hammering technique, features a unique texture that is one-of-a-kind for each piece. It is made of San Mai steel, with a VG-10 cutting edge and 420J2 outer layers, a combination that ensures an excellent balance between sharpness, edge retention, and durability.

The glass-reinforced nylon (GRN) handle is designed with perfectly contoured inserts to provide optimal balance and a secure, comfortable grip. The knife is complemented by an elegant premium leather sheath, enhanced with a colored fabric insert and a button closure.

Manufactured in Japan, the SOG Forge FG01-L evokes an era when honor and master craftsmanship were fundamental values. An object that is not merely a tool, but a true collector’s item destined to stand the test of time and be passed down from generation to generation.

Intended Use: Collectible / Sport

Production Type: Industrial
Country of Origin: Seki - Japan
Blade: SanMai laminated stainless steel with a VG-10 cutting edge and 420J2 outer layers, featuring a concave grind
Blade Finish: Hammered and Brut de Forge with a satin-finished portion of the cutting edge
Handle: Three-dimensionally shaped GRN (Glass Reinforced Nylon)
Blade Length: 160mm.
Blade thickness: 5 mm.
Overall length: 275 mm.
Weight: 290 g.
Sheath: Leather, with an insert of fine Japanese fabric, which varies from sheath to sheath
Packaging: Cardboard box with SOG logos
Notes: Knife from a private collection, previously purchased

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

The Benchmade Anthem is one of the most daring and iconic knives ever made by the American brand. A “carte blanche” project, now out of production, it stands out for its integral monoblock titanium construction, high-level mechanical workmanship, and the best interpretation ever of the famous Axis Lock, redesigned here to ensure exceptional strength and fluidity. Elegant, slim, and surprisingly ergonomic, the Anthem is not just a knife, but a true statement of passion and engineering, designed for connoisseurs and collectors.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV steel 59/61HRC
Blade treatment: stonewashed
Handle: integral, bronze-colored anodized titanium
Blade length: 89mm.
Blade thickness: 2.85mm.
Closed length: 116mm.
Total length: 205mm.
Weight: 104g.
Closure: Axis Lock
Clip: Anodized titanium
Packaging: Cardboard box with Benchmade logos
Notes: knife out of production, previously purchased, from a private collection

KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available In production.
* Sharpening: Factory sharpened, perfect
* Marks on blade: None
* Marks on handle: Slight abrasion marks in contact surfaces between blade and titanium handle and on T-Latch block due to engagement of block and opening/closing of knife
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory


Intended use: sports/collection

Production Type: Industrial
Blade Production: USA
Blade: stainless steel CPM-S30V 58/60HRC
Blade treatment: satin finish
Handle: CNC-machined micro-bead-blasted titanium
Blade length: 112mm.
Blade thickness: 3.1mm.
Length closed: 139mm.
Total length: 254mm.
Weight: 149g.
Closure: T-latch
Sheath: Black nylon
Packaging: Cardboard box with Benchmade logos
Notes: previously purchased knife, overall in very good condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, NOS (new old stock), never used or removed from its original box
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present and perfect
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

Created in 1986 as the second official model of the newly formed SOG Specialty Knives, the S2 Trident is not just a knife, but a bridge between the past and the present. Designed in honor of the Navy SEALs and special units that operated in Vietnam, it draws direct inspiration from the legendary MACV-SOG knives of the 1960s, “sterilized” and lethal tools used in the most secret missions of the conflict.

Produced during the company's golden age in Seki, Japan, the Trident combines elegant lines and combat functionality: a thick, balanced AUS-8 steel Bowie blade with impeccable satin finish; ergonomic and durable black micarta stacked washer handle; and the engraved Navy SEAL symbol, a seal of belonging to an elite group. The leather sheath with sharpening stone completes a package designed for operators and collectors.

The S2 Trident is the most refined tribute to SOG's operational past: a homage to the military tradition of Vietnam reinterpreted with Japanese craftsmanship. Today, with a very high rarity index, it is considered one of the most sought-after pieces by military knife collectors, not only for its build quality, but for the history embodied in its blade.

Intended use: Military / Collection

Type of production: industrial
Country of production: Seki - Japan
Blade: AUS-8 stainless steel
Blade finish: Satin
Handle: Stacked micarta rings
Blade length: 160mm.
Blade thickness: 6 mm.
Total length: 278 mm.
Balance: rearward, 1 cm from the guard
Weight: 312 g.
Sheath: leather with pocket for sharpening stone (included)
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and modified with aftermarket parts
* Condition: Like new
* Available on the market: Basic version available on the market
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

Customized and modified by the previous customer with various premium quality aftermarket parts, it comes with all the original accessories to restore it to the manufacturer's original specifications and includes all the packaging for the modifications made, listed below and already mounted on the knife:

MODIFICATIONS MADE (commercial value €125)
* LynchNW - Stubby Clip Stonewashed in 6AL-4V grade 5 titanium (commercial value €35)
* August Engineering - Titanium Hardware Kit Raw Black, titanium screws and spacers (commercial value €30)
* Flytanium - Premium Kit Canvas Micarta Scales (commercial value €41)
* Flytanium - Slotted Thumbstud Kit, titanium opening pin (market value €19)

Intended use: Sports/EDC

Type of production: Industrial
Country of production: USA
Blade: CPM-S30V steel 58/60HRC
Blade finish: Stonewashed
Modified handle: Premium Green Canvas Micarta by Flytanium with Raw Black titanium screws and spacers by August Engineering
Original handle: 6061-T6 aluminum with green anodization and purple anodized spacers (included)
Blade length: 74mm.
Blade thickness: 2.7mm.
Closed length: 97.5mm.
Total length: 172mm.
Closed thickness: 10mm.
Weight: 57g.
Lock: AXIS Lock
Modified clip: stonewashed titanium, deep pocket by LynchNW
Original clip: Removable and reversible, stainless steel 
Packaging: Cardboard box with Benchmade logos + Aftermarket product boxes and packaging
Notes: Previously purchased product from a private collection - Design by Warren Osborne

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Mechanically perfect, with obvious signs of wear on the blade finish that do not compromise its practical use in any way 
* Available on the market: Introduced in 2001, now out of production
* Sharpening: Resharpened several times, professionally resharpened before being offered for sale
* Marks on blade: Multiple superficial cosmetic marks
* Marks on handle: a few small marks due to use
* Box: None
* Sheath: None
* Manuals, Certificates, and Warranties: None
* Checked and Certified by our in-house lab

Intended use: EDC / Light Utility

Type of production: Industrial
Country of production: USA
Blade: CPM-154CM stainless steel
Blade finish: Burnished
Handle: Aluminum
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 200mm.
Weight: 82g.
Closure: Axis Lock (Crossbar Lock)
Clip: Removable and reversible, in burnished stainless steel
Packaging: -
Notes: discontinued model no longer available on the market - knife previously purchased and used, from a private collection - mechanically perfect with obvious signs of wear that do not compromise its practical use in any way.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never removed from its original packaging
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

Built on a solid foundation, the redesigned Altitude takes ultralight hunting gear to new heights. This minimalist fixed blade features carbon fiber scales for better control of the CPM-S90V blade. This incredible ultralight cutting tool earns its place by your side thanks to its balance of corrosion resistance, strength, and edge retention.

Intended use: Hunting / Light Utility

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-S90V stainless steel (59/61HRC)
Blade treatment: Orange Cerakote
Handle: CPM-S90V stainless steel with carbon fiber scales
Blade length: 78mm.
Blade thickness: 2.3mm.
Overall length: 175mm.
Weight: 47g.
Sheath: Boltaron, can be worn around the neck or compatible with M.O.L.L.E. or UltiClip attachments 
Packaging: cardboard box with Benchmade logos
Notes: knife out of production, previously purchased, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Overall in good condition, shows some minor cosmetic marks on the heat treatment of the titanium handles, clip, and blade, which do not compromise its practical use in any way
* Available on the market: Out of production and no longer available on the market
* Sharpness: Factory sharp
* Marks on blade: Minor cosmetic marks due to carrying and use
* Marks on handle: Minor cosmetic marks due to wear and tear
* Box: Knife sold in a nylon bag with EOS logos and a titanium key to adjust the blade tension
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

EOS Prawn – The first friction folder by EOS
The Prawn marks EOS's debut in the world of friction folders, offering a compact and robust solution for everyday use. Featuring a flamed titanium handle and CPM-S35VN sintered steel blade, it combines robustness and exclusive design.

Although it does not have a blade lock, the adjustable washer system allows you to keep the blade in the open or closed position by adjusting the tension. Its compact size makes it ideal for carrying in your pocket, backpack, or tactical bag.

Intended use: Tactical/EDC/Collection

Production type: Midtech
Country of manufacture: USA
Blade: CPM S35VN steel
Blade treatment: Stonewashed
Handle: Flamed titanium
Blade length: 68mm.
Blade thickness: 4mm.
Closed length: 83mm.
Total length: 135mm.
Closed thickness: 12mm.
Weight: 93g.
Closure: Friction Folder (without blade lock)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Notes: knife from a private collection, previously purchased and used, equipped with its original nylon pouch with which it was sold and a small titanium key to be used to adjust the tension and fluidity of the blade opening

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, a couple of imperceptible marks on the inner folders, on the back of the knife.
* Commercially available: Commercially available.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: a couple of imperceptible marks on the inner folders, on the back of the knife
* Box: Present
* Scabbard: Microfiber bag.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Utility / Hiking / Tactical

Production Type: Industrial
Country of Production: USA
Blade: CPM-CRUWEAR 63/65HRC tool steel
Blade finish: Tungsten gray
Handle: G10 with PVD stainless steel folders
Blade length: 82.6mm.
Blade thickness: 3.6mm.
Length closed: 111mm.
Total length: 193mm.
Handle thickness: 16mm.
Weight: 130g.
Closure: AxisLock
Clip: Deep Pocket, removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos, microfiber pouch with Benchmade logos
Notes: previously purchased knife, from a private collection - high carbon steel blade, not stainless; wash and dry carefully after use and grease if storing

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, to be evaluated for potential resharpening.
* Commercially available: Discontinued
* Sharpening: Factory, still in good condition, but with small oxidation spots on the tip (can be easily removed by resharpening the knife, but we intentionally left the factory sharpening excellent)
* Marks on blade: A few imperceptible signs of use on the blade.
* Marks on handle: None
* Box: Present
* Scabbard: Microfiber bag.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: EDC/Gentleman

Production Type: Industrial
Country of Production: USA
Blade: Stainless Steel CPM-S30V 58/60HRC
Blade treatment: satin finish and stone washed
Handle: micarta
Blade length: 73mm.
Blade thickness: 2.3mm.
Length closed: 98mm.
Total length: 170mm.
Thickness when closed: 10mm
Weight: 66g.
Closure: SlipJoint (without blade lock)
Packaging: cardboard box with Benchmade logos
Notes: previously purchased knife, withdrawn from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Not present
* Scabbard: Microfiber pouch with Benchmade logos.
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory

The Benchmade Contego, discontinued in 2019, is a tactical folding knife that combines high-end performance and rugged design. This limited edition has a Black and Blue G10 handle and an M390 stainless steel blade, known for its exceptional edge retention and corrosion resistance, the Contego is ideal for those seeking a versatile and durable knife. With its ambidextrous AXIS locking mechanism, this knife is designed for reliability and comfort in any situation.

Intended Use: Tactical / Sporting / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel M390
Blade finish: satin-finished
Handle: G10
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 167g.
Closure: Axis Lock
Clip: Removable and reversible, satin-finished stainless steel
Sheath: microfiber pocket with Benchmade logos
Packaging: Without original packaging
Notes: special edition of Contego model, discontinued as of 2019, previously purchased knife from a private collection

Intended use: Collection and EDC (Everyday Carry)
Production type: Industrial
Country of manufacture: USA
Blade: Tru-Sharp™ stainless steel
Blade finish: Mirror polished
Handle: Amber Bone Peach Seed Jig
Blade length: 69mm
Blade thickness: 2.3mm
Closed length: 107mm
Total length: 176mm
Closed thickness: 10mm
Weight: 56g
Locking mechanism: Back Lock
Clip: None
Packaging: Cardboard box with Case logos
Notes: Iconic Case model, available in limited quantities

PREVIOUSLY PURCHASED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: knife previously purchased, withdrawn from a private collection.
* Condition: like new, never used
* Commercially available: discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Microfiber pouch.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Annually Benchmade releases a limited edition knife model under its Gold Class line. These Benchmade Gold Class knives are made from the finest materials and feature the highest level of workmanship. Each Benchmade Gold Class knife series is limited and numbered.

This particular Gold model, the 750-101, has Damasteel blade with Infinity pattern, bronze anodized monolock titanium handle with black carbon fiber inserts contoured and handcrafted, the titanium back spacer is also bronze anodized. All hardware components are finished with DLC (including the pocket clip). This Gold Class series is limited to 200 pieces.

Intended Use: Collection

Type of production: Semi-Industrial
Country of manufacture: USA
Blade: stainless Damasteel with Infinity design
Handle: bronze anodized titanium and carbon fiber
Blade length: 91mm.
Blade thickness: 3.18mm.
Length closed: 119mm.
Total length: 212mm.
Weight: 127g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: Black fabric pouch with Benchmade logos 
Packaging: “Gold Class” cardboard box with Benchmade logos - Rubberized steel case with magnetic closure - Warranty certificates with date and numbering
Notes: Limited Edition 2010, Knife number #133 out of #200 - each piece is numbered on the blade

KNIFE RETIRED FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private owner, previously purchased and no longer in production
• Condition: Overall in excellent condition
• Commercial Availability: NOT commercially available
• Edge: Original
• Blade marks: None
• Handle marks: None
• Box: -
• Sheath: -
• Manuals, Certificates, and Warranties: -
• Inspected and Certified: by our internal laboratory

The SOG Mini-Vulcan VL-02 is a high-quality folding knife designed to meet the needs of knife enthusiasts and demanding users. Engineered to combine durability, functionality, and refined design, this model is the perfect blend of advanced engineering and precision craftsmanship.

The VG-10 steel blade, extremely sharp and corrosion-resistant, ensures flawless performance both in outdoor settings and daily tasks. The patented Arc-Lock opening mechanism from SOG offers secure and smooth closure while ensuring speed and ease of use.

Compact and lightweight, the Mini-Vulcan is perfect for those seeking a versatile, reliable, and easy-to-carry knife. Whether you’re a collector, hiker, or professional, this knife will be an essential companion, ready to tackle the challenges of any day.

Intended Use: Sporting

Production Type: Industrial
Blade Production: Japan
Blade: VG-10 stainless steel
Blade Treatment: -
Handle: Zytel and steel liners
Blade Length: 78mm
Blade Thickness: 3mm
Closed Length: 109mm
Overall Length: 187mm
Closed Thickness: 20.3mm
Balance: -
Weight: 104g
Locking Mechanism: Arc Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: -
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: USA
Blade: CPM-3V steel
Blade Finish: Gray Coated
Handle: Grivory
Blade length: 86mm.
Blade thickness: 2.3mm.
Length closed: 119mm.
Total length: 205mm.
Thickness when closed: 10.4mm.
Weight: 58.4g.
Locking system: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: previously purchased knife from a private collection

The SOG Winder II Heavy Duty Folding Knife (model SOG00009) exemplifies high quality and precision in knife making. With a blade length of 8.8 cm and a thickness of 4.7 mm, it is perfect for all kinds of tasks, providing excellent performance in cutting, slicing and piercing. The black textured Kraton handle provides an excellent grip, while the sturdy Lockback mechanism ensures safety during use.

The knife has an ambidextrous design, making it easy for both left- and right-handed people to use, and its compactness (11.4 cm when closed) makes it convenient to carry in a pocket or backpack. Made in Seki, Japan, a city with a long tradition of knife making, the Winder II is synonymous with high quality and craftsmanship.

Purchased in 1994 from the well-known Hoffritz cutlery chain in New York and now discontinued, it is a collector's item of great historical value. This knife, from a private collection, shows no signs of use, and is a prized piece for enthusiasts and collectors.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: In very good condition, with normal signs due to time
* Commercially available: 1994 knife - Discontinued model
* Sharpening: Factory.
* Marks on blade: Normal marks given by the opening and closing of the blade.
* Marks on handle: No.
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Collection

Production Type: Industrial
Country of Production: Japan
Blade: stainless steel AUS-8
Blade finish: satin finish
Handle: stainless steel and kraton
Blade length: 88mm.
Blade thickness: 4.7mm.
Length closed: 114mm.
Total length: 205mm.
Weight: 220g.
Closure: back-Lock
Notes: previously purchased 1994 knife, discontinued, in excellent condition

Type: Previously purchased knife, from a private collection
Condition: Like new, never used
Commercial Availability: Discontinued
Edge: Factory edge
Blade Marks: None
Handle Marks: None
Box: Present
Sheath: -
Manuals, Certificates, and Warranties: Present
Inspected and Certified by our internal laboratory

Intended Use: Collection/Tactical
Type of Production: Semi-Industrial
Blade Production: USA
Blade: Stainless steel Damascus by Damasteel with Odin Heim pattern
Blade Treatment: -
Handle: Red and black carbon fiber with red anodized aluminum spacers
Blade Length: 90mm
Blade Thickness: 3.15mm
Closed Length: 119mm
Total Length: 210mm
Closed Thickness: -
Balance: -
Weight: 135g
Lock: Axis Lock
Clip: Removable and reversible, stainless steel
Sheath: Black fabric pouch with golden Benchmade logos
Packaging: "Gold Class" cardboard box with Benchmade logos - Rubber-coated steel case with magnetic closure
Notes: Limited Edition 2016, each piece is numbered on the blade

Exclusive product created in collaboration with the PDT YouTube channel - The Cutthroat's Park. This unique knife was actually used in a field test that you can view directly in this product sheet.

To make it even more special, we engraved Floriano's autograph and the PDT logo on the blade. The box of the knife was also autographed by Floriano making it a must-have collector's item.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: Floriano of the PDT Parchetto del Tagliagole.
* Condition: Overall in very good condition.
* Commercially available: Still in catalog.
* Sharpening: Factory sharpened, stropped by Floriano after use.
* Marks on blade: Small signs of concrete use.
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Utility / Hiking

Production Type: Industrial
Country of Production: USA
Blade: CPM-S30V 58/60HRC sintered stainless steel
Blade finish: Stonewash
Handle: G10
Blade length: 111mm.
Blade thickness: 4.2mm.
Total length: 229mm.
Weight: 218g.
Sheath: leather, with belt loop for vertical carry
Packaging: cardboard box with Benchmade logos
Notes: knife used in a YouTube video review by Floriano of PDT

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in good condition.
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: Minimal marks on left cheek piece.
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: USA
Blade: steel CPM-20CV 59/61HRC
Blade finish: satin finish
Handle: Black G10
Blade length: 82mm.
Blade thickness: 3.5mm.
Length closed: 101mm.
Total length: 186mm.
Weight: 102g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Absent
Notes: Previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: brand new
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present, complete kit
* Scabbard: Microfiber pouch.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended use: sports/collection

Production type: Industrial
Country of manufacture: USA
Blade: steel D2 60/62HRC
Blade finish: satin finish
Handle: G10 and titanium
Blade length: 108mm.
Blade thickness: 2.5mm.
Length closed: 137mm.
Total length: 237mm.
Thickness when closed: -
Balance: -
Weight: 94g.
Closure: T-latch
Clip: titanium
Packaging: cardboard box with Benchmade logos
Notes: knife withdrawn from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: Japan
Blade: VG10 stainless steel
Blade Finish: Black TiNi
Handle: Zytel with steel liners
Blade Length: 78mm.
Blade thickness: 3mm.
Length closed 109mm.
Total length: 187mm.
Thickness when closed: 20.3mm.
Weight: 104g.
Closure: Arc Lock
Clip: removable, stainless steel
Scabbard: -
Packaging: cardboard box with SOG logos
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition.
* Commercially available: Discontinued since 2014
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present, with a few small signs of time.
* Sheath: Microfiber bag with Benchmade logos.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of Production: USA
Blade: made of CPM-S30V steel at 58-60HRC
Blade finish: satin-finished
Handle: anodized titanium
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 245mm.
Handle thickness: 12.5mm.
Weight: 189.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Like new
* Commercially available Discontinued since 2015
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of manufacture: USA
Blade: Bohler M390 60/62HRC stainless steel
Blade Finish: Stone Washed
Handle: G10 and Titanium
Blade length: 73.5mm
Blade thickness: 4.15mm.
Length closed: 96.5mm.
Total length: 175mm.
Thickness when closed: 15.5mm.
Weight: 156g.
Closure: Frame Lock
Clip: Titanium, machined from billet
Packaging: Cardboard box with Benchmade logos
Notes: Design by Shane Sibert

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: In like new condition
* Commercially available: No
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Yes original
* Manuals, Certificates and Guarantees: Yes
* Checked and Certified by our internal laboratory

Intended use: Sports
Type of production: Industrial
Blade production: Japan
Blade: laminated stainless steel with VG-10 cutting edge
Blade Treatment: -
Handle: Zytel and steel liners
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed length 123mm.
Total length: 210mm.
Closed thickness: 21.5mm.
Balancing: -
Weight: 144g.
Closure: Arc Lock
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with SOG logos
Note: -

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased - knife no longer in production since
* Condition: in excellent condition, like new
* Commercially available: difficult to find
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original Sog box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: Japan
Blade: VG-10 stainless steel
Blade treatment: -
Handle: GRN
Blade length: 74mm.
Blade thickness: 2.5mm.
Closed length: 114mm.
Total length: 178mm.
Thick when closed: 7mm.
Balancing: -
Weight: 113g.
Closure: Arc-Lock Pendulum
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with SOG logos
Note: -