Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual; previously purchased and used
* Condition: Structure intact, no functional compromises, fully operational and ready for use. Presence of slight surface marks on the finish and signs of age.
* Available on the market: Discontinued
* Sharpening: Factory-sharpened
* Marks on blade: Slight surface marks on the finish
* Marks on handle: None
* Box: /
* Sheath: Nylon, belt-mounted
* Manuals, Certificates, and Warranties: /
* Inspected and Certified by our in-house laboratory

This Mick Strider-signed BT model features a black blade with a knurled thumb rest, a thickness of 6.4mm, and a full-tang construction to ensure maximum strength and durability.

The handle features green MEFP scales with a lanyard hole and an integrated pry bar on the back. Comes complete with a nylon sheath with a belt loop.

Strider Knives

Founded and run by former military personnel, Strider Knives is a company specializing in the development of cutting tools designed to withstand the most extreme operating conditions. The initial goal was to create a reliable utility knife, built with the highest quality materials yet affordable and easy to maintain by field personnel.

Over time, the brand has established itself as a benchmark in the world of tactical and professional knives, thanks to models developed specifically to meet the needs of military personnel, law enforcement, special operations personnel, hunters, and professional divers. Every design stems from a practical and functional approach, focused on maximum durability and reliability in the field.

Intended Use: Tactical / All-Rounder Utility

Production Type: Midtech
Country of Manufacture: USA
Blade: Full tang, CPM-3V crucible steel
Blade Finish: Black Coating
Handle: G10
Blade length: 161mm.
Blade thickness: 6.4mm.
Overall length: 308mm.
Balance: rear-weighted
Weight: 410g.
Sheath: Nylon, belt-mounted
Packaging: -
Notes: Previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: Available in different configurations
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

The Bad Medicine by Wander Tactical is a handcrafted knife designed to offer exceptional performance in any context. Manufactured in Italy with high-quality materials and meticulous workmanship, this tool is synonymous with strength and precision.

The D2 steel blade, treated with a raw finish, guarantees excellent wear resistance and reliable cutting. The ergonomic and durable G10 handle ensures a secure grip even in the most extreme conditions. 

Completed by a thermoformed Kydex sheath, compatible with the M.O.L.L.E. system, and accompanied by a certificate of guarantee and authenticity, this knife represents the perfect balance between traditional craftsmanship and modern innovation.

Intended use: All-round utility

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/61HRC
Blade finish: Raw
Handle: G10
Blade length: 150mm.
Blade thickness: 5mm.
Total length: 295mm.
Balance: advanced
Weight: 405g.
Sheath: thermoformed Kydex, with M.O.L.L.E. compatible belt loop.
Packaging: accompanied by a certificate of guarantee and authenticity.
Notes: knife entirely handmade, in every part.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, with only a small mark on the blade, no packaging or certificates
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: a small mark on the upper right side of the blade
* Marks on handle: None
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: Collection / Heavy Duty

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/61HRC with cryogenic tempering
Blade treatment: Raw
Handle: 2mm titanium scales with micarta grip
Blade length: 93mm.
Blade thickness: 5mm.
Closed length: 124mm.
Total length: 214mm.
Closed thickness: 24mm.
Weight: 193g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade
Closing: Rockers Arm 8.11
Clip: stonewashed titanium, removable and reversible
Packaging: Plastic case with Wander Tactical logos
Notes: Limited Edition, entirely handmade - knife previously purchased from a private collection

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: In excellent condition, never used, with some minor signs of wear
* Available on the market: Difficult to find
* Sharpness: Factory sharpness, could be improved
* Marks on blade: Some minor signs of wear
* Marks on handle: Some minor signs of wear
* Box: -
* Sheath: in excellent condition, complete
* Manuals, Certificates, and Warranties: -
Checked and Certified by our in-house laboratory

Created for survival, it became a legend.

The Randall Model 18 is much more than a knife: it is a symbol of resistance, ingenuity, and determination. Created to accompany military pilots on the most extreme missions, it has won over generations of adventurers, explorers, and collectors around the world. With its tubular handle and unmistakable battle design, it embodies the essence of true survival—where only reliability, strength, and the ability to adapt to any situation matter.

Today, as then, it is the perfect ally for those who are not satisfied with just any knife. For those looking for a faithful companion, ready for anything. For those who love to own a piece of history, hand-forged in the United States, still according to tradition.

A timeless icon, built to last a lifetime. And beyond.

Intended use: All-round utility/survival 

Type of production: Handcrafted
Country of production: Orlando, Florida, USA
Blade: 440B stainless steel at 57/59HRC
Blade finish: satin
Handle: tubular, stainless steel, with through guard and brass screw cap 
Blade length: 142mm.
Blade thickness: 6mm.
Total length: 264mm.
Weight: 345g.
Sheath: brown oiled leather, with belt loop, front button pocket, and sharpening stone
Notes: previously purchased knife, withdrawn from private collection, in excellent condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Overall in good condition, shows some minor cosmetic marks on the heat treatment of the titanium handles, clip, and blade, which do not compromise its practical use in any way
* Available on the market: Out of production and no longer available on the market
* Sharpness: Factory sharp
* Marks on blade: Minor cosmetic marks due to carrying and use
* Marks on handle: Minor cosmetic marks due to wear and tear
* Box: Knife sold in a nylon bag with EOS logos and a titanium key to adjust the blade tension
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

EOS Prawn – The first friction folder by EOS
The Prawn marks EOS's debut in the world of friction folders, offering a compact and robust solution for everyday use. Featuring a flamed titanium handle and CPM-S35VN sintered steel blade, it combines robustness and exclusive design.

Although it does not have a blade lock, the adjustable washer system allows you to keep the blade in the open or closed position by adjusting the tension. Its compact size makes it ideal for carrying in your pocket, backpack, or tactical bag.

Intended use: Tactical/EDC/Collection

Production type: Midtech
Country of manufacture: USA
Blade: CPM S35VN steel
Blade treatment: Stonewashed
Handle: Flamed titanium
Blade length: 68mm.
Blade thickness: 4mm.
Closed length: 83mm.
Total length: 135mm.
Closed thickness: 12mm.
Weight: 93g.
Closure: Friction Folder (without blade lock)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Notes: knife from a private collection, previously purchased and used, equipped with its original nylon pouch with which it was sold and a small titanium key to be used to adjust the tension and fluidity of the blade opening

Intended use: Collection and EDC (Everyday Carry)
Production type: Industrial
Country of manufacture: USA
Blade: Tru-Sharp™ stainless steel
Blade finish: Mirror polished
Handle: Amber Bone Peach Seed Jig
Blade length: 69mm
Blade thickness: 2.3mm
Closed length: 107mm
Total length: 176mm
Closed thickness: 10mm
Weight: 56g
Locking mechanism: Back Lock
Clip: None
Packaging: Cardboard box with Case logos
Notes: Iconic Case model, available in limited quantities

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private, previously purchased
* Condition: Like new
* Commercially available: Discontinued
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Scabbard: Original, like new
* Manuals, Certificates and Warranties: - -
* Checked and certified by our in-house laboratory

The Wander Tactical Barracuda is a knife with a tactical design but which lends itself well to a wide range of activities typical of a utility knife. With its D2 steel blade and Micarta handle, it offers the perfect balance between durability and comfort in use.

Intended use: Utility

Production type: Industrial
Country of manufacture: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: -
Handle: Micarta
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 205mm.
Weight: 225g. (304g. scabbard included)
Scabbard: Kydex, thermoformed, with tek-lok attachment
Packaging: -
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new
* Commercially available: Discontinued
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Scabbard: Original, like new
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory.

The Viper Tank is a fixed-blade knife designed to deliver exceptional performance in tactical and outdoor situations. Made in Italy from high-quality materials, this knife combines strength and functionality, making it ideal for outdoor enthusiasts.

The D2 steel blade provides excellent cutting power, while the ergonomic micarta handle ensures a firm and comfortable grip. The MO.L.L.E.-compatible Cordura sheath completes the equipment, allowing safe and convenient carrying.

Intended Use: Utility

Production type: Industrial
Country of production: Italy
Blade: D2 steel at 58/59HRC
Blade Treatment: Aspis Coating
Handle: Canvas Micarta
Blade Length: 155mm.
Blade thickness: 5.8mm.
Total length: 297mm.
Weight: 415g.
Sheath: black Cordura, by Vega Holster, with MOLLE attachments
Packaging: -
Notes: Design by Tommaso Rumici - previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used.
* Condition: Overall in very good condition, damaged scabbard (no lanyard on handle). 
* Commercially available: Discontinued, replaced by “Evolution” versions.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Present but damaged (lacking strap to stop handle).
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Light Utility

Production type: Industrial
Country of Production: Italy
Blade: Carbon steel D2 59/60HRC
Blade Treatment: Black PVD
Handle: Canvas Micarta
Blade Length: 125mm.
Blade thickness: 5.8mm.
Total length: 252mm.
Balance: set back 1cm
Weight: 280g.
Sheath: nylon, thigh-high, M.O.L.L.E. compatible.
Packaging: -
Notes: Design by Tommaso Rumici - previously purchased knife, from a private collection

KNIFE RETRIEVED FROM PRIVATE COLLECTION

• Origin: Retrieved from a private individual, previously purchased
• Condition: In excellent condition
• Commercial Availability: NOT available on the market
• Blade Edge: Original
• Blade Marks: None
• Handle Marks: None
• Box: -
• Sheath: Original
• Manuals, Certificates, and Warranty: -
• Checked and Certified: By our internal laboratory

The Viper Tank Black Aspis VT4004BK is a fixed-blade knife designed to deliver exceptional performance in tactical and outdoor scenarios. Made in Italy with high-quality materials, this knife combines durability and functionality, making it ideal for outdoor enthusiasts and military use. The D2 steel blade with black PVD coating ensures corrosion resistance and excellent cutting ability, while the ergonomic handle in brown canvas impregnated with phenolic resin provides a firm and comfortable grip. The Cordura® sheath compatible with the MO.L.L.E. system completes the equipment, allowing safe and practical transport.

Intended Use: Sporting/Utility

• Type of Production: Industrial
• Blade Production: Italy
• Blade: D2 steel at 58/59HRC
• Blade Treatment: Aspis Coating
• Handle: Canvas Micarta
• Blade Length: 155mm.
• Blade Thickness: 5.8mm.
• Closed Length: -
• Total Length: 297mm.
• Closed Thickness: -
• Balance: -
• Weight: 415g.
• Lock: -
• Clip: -
• Sheath: Black Cordura, by Vega Holster, with MOLLE attachments
• Packaging: 
• Notes: Design by Tommaso Rumici

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: -
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: -
Inspected and certified by our internal laboratory

Drop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Deer wood and leather rings, and oiled leather sheath.

Intended use: hunting / light utility

Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: deer horn and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 275g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like new

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: Nylon pouch with zipper, with Randall Knives logos
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: Original warranty sheet
Inspected and certified by our internal laboratory

Drop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Desert Ironwood and leather, and oiled leather sheath.

Intended use: hunting / light utility

Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: Desert Ironwood and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 270g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like new - provided with Randall Knives zippered nylon pouch and paper warranty

The Model 26 Pathfinder is an excellent lightweight skinning and outdoor knife. The blade design favours both cutting and pointing work. This knife has become one of the most popular small hunting knives.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Good overall condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: Slight on the guard, the deer part is parts as new
* Packaging: -
* Scabbard: Original, leather, in good condition, some marks on the front
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: utility

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Deerskin
Blade length: 100mm.
Blade thickness: 4mm.
Total length: 215mm.
Balance: set back about 2cm from the guard
Weight: 124g. (206g. scabbard included)
Sheath: brown leather with belt loop
Notes: -

The Model 16 was designed to meet the demand for an almost indestructible multi-purpose knife, including intensive use in salt water (careful cleaning and maintenance is however recommended). A special wax-impregnated sheath is included.

7″ (17.8cm) stainless steel blade with 6.5mm thickness. The top of the blade is slightly serrated to allow easy thumb placement. Black Micarta handle. Extra-heavy 7/8″ (2.2cm) wide tang that extends through a channel in the handle, securely fixed with epoxy. 

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased, manufactured in 2023
* Condition: Very good condition, like new
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in very good condition
* Manuals, Certificates and Warranties: - - * Checked and Certified by our in-house laboratory.
* Checked and certified by our in-house laboratory

Intended use: utility

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Micarta
Blade length: 178mm.
Blade thickness: 6.5mm.
Total length: 297mm.
Balance: on the guard
Weight: 362g. (522g. including scabbard)
Sheath: Brown leather with belt loop
Notes: -

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Conditions: in like-new condition
* Available on the market: No longer available
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: /
* Manuals, Certificates and Guarantees: NO
* Checked and Certified by our internal laboratory

Designed by the well-known Danish designer Jesper Voxnaes, Odino is a high-end folding knife characterized by the frame lock architecture with a rotation system on bearings and the use of noble and technological materials (frame entirely in titanium and grip in carbon fiber, titanium or G-10). Vox's unique style, influenced by both Scandinavian design and American cutlery, the attention to detail and the excellence of Viper's typical workmanship create an absolutely original and high-level knife.

Intended use: Sporting/EDC

Type of production: Industrial
Blade production: Italy
Blade: Stainless steel N690Co 58/59HRC
Blade treatment: Stonewashed
Handle: Carbon Fiber and Titanium
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 100mm.
Total length: 184mm.
Closed thickness: -
Balance: -
Weight: 125g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Conditions: in like-new condition
* Available on the market: No longer available
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: /
* Manuals, Certificates and Guarantees: Yes
* Checked and Certified by our internal laboratory

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: handcrafted blade and handle

Country of production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: titanium folders with handle in micarta
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 213mm.
Closed thickness: 17mm.
Balance: -
Weight: 150g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: Small abrasions given by being placed in kydex sheath.
* Marks on handle: None
* Box: /
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: GunKote
Handle: Micarta
Blade length: 65mm.
Blade thickness: 6.5mm.
Total length: 132mm.
Balance: backward
Weight: 198g.
Sheath: made of Kydex, thermoformed
Packaging: -
Notes: previously purchased knife from a private collection

This is a smaller version of Bo Randall's original knife, made in the Scagel knife style. 12.2 cm blade made of 4.5 mm thick stainless steel. This size and shape are popular with outdoor activity experts worldwide. It has a nickel silver guard and back cap and a handle made of authentic Indian deer antler. It weighs about 168 grams and comes with a brown leather sheath.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting/fishing

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: deerskin with through-guard and nickel silver tang
Blade length: 122mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Balance: backward
Weight: 168g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

The Model 27 is an ideal all-purpose sports knife. This knife has a stainless steel blade, 5mm blade thickness and 147mm length with concealed tang construction. The handle has nickel silver guard and pommel and a leather and walnut wood ring handle with black micarta and nickel silver spacers. 

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: made of leather and walnut wood rings with through-guard and nickel silver tang
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 262mm.
Balance: backward
Weight: 230g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: ergonomic, walnut wood with through-guard and brass tang
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 245mm.
Balance: backward
Weight: 290g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: A few small marks given by being placed in the sheath.
* Marks on handle: A few small marks on the duralumin pommel.
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of manufacture: USA
Blade: carbon steel O-1
Blade finish: satin finish
Handle: leather rings with brass through-guard and duralumin tang
Blade length: 118mm.
Blade thickness: 4.5mm.
Total length: 230mm.
Balance: backward
Weight: 210g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

This Model 19-4 Bushmaster from Randall Made Knives features a clip point blade with satin finish, false counterbore and serrated thumb rest. The handle consists of nickel silver through-guard and recoil pad with colored micarta spacers and monolithic curved deer antler grip. Includes original "Model A" leather sheath with belt loop and sharpening stone.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: deer antler with through-guard and nickel silver recoil pad
Blade length: 115mm.
Blade thickness: 5.5mm.
Total length: 228mm.
Balance: set back
Weight: 281g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

CUCHILLO DE COLECCIÓN PRIVADA
* Tipo: Comprado Anteriormente 
* Condición: Muy buen estado
* Afilado: Original
* Marcas en la hoja: Ninguna
* Marcas en el mango: Ninguna
* Embalaje: -
* Vaina: original, cuero, en muy buen estado
* Manuales, Certificados y Garantías: - - * Comprobado y certificado por nuestro laboratorio interno.
* Comprobado y certificado por nuestro laboratorio interno

El Randall Model 1 Fighter fue uno de los primeros modelos producidos en el taller de Randall en Orlando. Un Modelo 1, fabricado por el propio Bo Randall, sirvió como prototipo para la Springfield Randall que fue producida por la Northampton Cutlery Company cerca de Springfield, Massachusetts, en 1943 y 1944 para uso del ejército estadounidense.

Uso previsto: táctico / militar

Tipo de fabricación: artesanal
País de fabricación: USA
Hoja: espiga completa en acero inoxidable 440B
Acabado de la hoja: satinado
Empuñadura: protector pasante de latón y empuñadura monolítica de micarta
Longitud de la hoja: 177 mm.
Grosor de la hoja: 5mm.
Longitud total: 295mm.
Equilibrio: en la rama de la guarda
Peso: 350g.
Funda: cinturón, cuero negro
Notas: Cuchillo comprado anteriormente, retirado de colección privada

Intended Use: Collection / Heavy Duty

Production type: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Black Blood
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total length: 214mm.
Thickness when closed: 21mm.
Weight: 186g.
Opening: Carson Flipper system / Ambidextrous opening pins on blade.
Closure: Rockers Arm 8.11
Clip: stone washed titanium, removable and reversible
Packaging: plastic pouch with Wander Tactical logos
Notes: Limited Edition, produced entirely by hand, each example differs from the previous one in aesthetic finishes

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Discontinued, model dating back to 2019
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: WT original packaging
* Sheath: -
* Manuals, Certificates and Warranties: WT certificate
* Checked and certified by our internal laboratory

Intended use: Collection / Heavy Duty

Type of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Closed length: 124mm.
Total length: 214mm.
Thick when closed: 21mm.
Weight: 186g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade
Closing: Rockers Arm 8.11
Clip: in stone washed titanium, removable and reversible
Packaging: Plastic case with Wander Tactical logos
Notes: Limited Edition, produced entirely by hand, each piece differs from the previous one in aesthetic finishes

Knife withdrawn from a private collection - Limited edition production in Japanese CoS steel in SanMai dating back to 2018 and no longer available - In like new condition, no marks on the blade (never cut, never resharpened) or on the handle. Supplied with handmade Kydex sheath and Wander Tactical certificate - Checked and certified by our in-house Coltelleria Collini laboratory.

In collaboration with Wander Tactical we have decided to propose their new neck knife, the Raptor model, in an exclusive version with a satin blade that uses the famous Japanese San Mai steel produced by Takefu Steel. Specifically we used, for the central plate, the CoS at 61.5HRC (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: Neck Knife / Collection

Type of production: Artisan
Production Lama: Italy
Blade: integral, in Japanese laminated stainless steel (San Mai) with cutting edge in CoS at 61.5HRC with cryogenic hardening
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: in Kydex, thermoformed, with lanyard for Neck Knife use
Packaging: -
Notes: Each knife is unique and handcrafted

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Knife withdrawn from private collection - Overall in excellent condition, still with factory sharpening, a few small signs of oxidation - Distinguished by Copper Brush finish, not usual to find on Wander models and very rare ivory white G-10 handle - Checked and certified by our in-house laboratory.

Type of Production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Copper Brush
Handle: G-10
Blade Length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balance: backward
Weight: 605g.
Sheath: made of Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Notes: supplied with certificate of authenticity and warranty dated 12/20/2020 - knife withdrawn from private collection, overall in excellent condition

Absolutely like new - Comes from a private collection - Unique item made in 2020, prototype, does not correspond to any standard model of Wander Tactical production - Made entirely by hand.

Use: Collection / Utility / Hunting

Production type: Handcrafted
Country of Production: Italy
Blade: integral, japanese rolled steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
Blade finish: satin finish 
Handle: Paracord
Blade length: 90mm.
Blade thickness: 6.65mm.
Total length: 200mm.
Balance: backward
Weight: 180g.
Sheath: in kydex
Package: Certificate of authenticity
Notes: Unique piece of 2020 - Prototype: it doesn't correspond to any standard model of Wander Tactical production - Entirely hand made - Absolutely like new, coming from a private collection,

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Coltelleria Collini, we decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically we have used the carbonaceous V-Toku2 at 62/63HRC for the central plate and the stainless SUS410 for the two external plates, in order to guarantee a very high cutting capacity, penetration and edge holding together with an easy resharpening and maintenance. At the same time the blade has a remarkable resistance to corrosion and an important increase of resilience given by the type of extreme steel and the laminated structure.

As in the ancient swords of the Japanese Samurai.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: It is made of different types of metals alloyed together to create a composite that contains and intensifies the strengths of the metals taken individually:

- Longer cutting edge life
thanks to the use of high quality steels with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performance decidedly superior to those achieved with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For further information: collinisteel

Knife withdrawn from a private collection in excellent condition, re-sharpened - Complete with original certificate - Checked and certified by our in-house Coltelleria Collini laboratory.

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Row Finish
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balancing: set back
Weight: 605g.
Sheath: in Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Note: