Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual; previously purchased and used
* Condition: Structure intact, no functional compromises, fully operational and ready for use. Presence of slight surface marks on the finish and signs of age.
* Available on the market: Discontinued
* Sharpening: Factory-sharpened
* Marks on blade: Slight surface marks on the finish
* Marks on handle: None
* Box: /
* Sheath: Nylon, belt-mounted
* Manuals, Certificates, and Warranties: /
* Inspected and Certified by our in-house laboratory

This Mick Strider-signed BT model features a black blade with a knurled thumb rest, a thickness of 6.4mm, and a full-tang construction to ensure maximum strength and durability.

The handle features green MEFP scales with a lanyard hole and an integrated pry bar on the back. Comes complete with a nylon sheath with a belt loop.

Strider Knives

Founded and run by former military personnel, Strider Knives is a company specializing in the development of cutting tools designed to withstand the most extreme operating conditions. The initial goal was to create a reliable utility knife, built with the highest quality materials yet affordable and easy to maintain by field personnel.

Over time, the brand has established itself as a benchmark in the world of tactical and professional knives, thanks to models developed specifically to meet the needs of military personnel, law enforcement, special operations personnel, hunters, and professional divers. Every design stems from a practical and functional approach, focused on maximum durability and reliability in the field.

Intended Use: Tactical / All-Rounder Utility

Production Type: Midtech
Country of Manufacture: USA
Blade: Full tang, CPM-3V crucible steel
Blade Finish: Black Coating
Handle: G10
Blade length: 161mm.
Blade thickness: 6.4mm.
Overall length: 308mm.
Balance: rear-weighted
Weight: 410g.
Sheath: Nylon, belt-mounted
Packaging: -
Notes: Previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Overall in good condition, shows some minor cosmetic marks on the heat treatment of the titanium handles, clip, and blade, which do not compromise its practical use in any way
* Available on the market: Out of production and no longer available on the market
* Sharpness: Factory sharp
* Marks on blade: Minor cosmetic marks due to carrying and use
* Marks on handle: Minor cosmetic marks due to wear and tear
* Box: Knife sold in a nylon bag with EOS logos and a titanium key to adjust the blade tension
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

EOS Prawn – The first friction folder by EOS
The Prawn marks EOS's debut in the world of friction folders, offering a compact and robust solution for everyday use. Featuring a flamed titanium handle and CPM-S35VN sintered steel blade, it combines robustness and exclusive design.

Although it does not have a blade lock, the adjustable washer system allows you to keep the blade in the open or closed position by adjusting the tension. Its compact size makes it ideal for carrying in your pocket, backpack, or tactical bag.

Intended use: Tactical/EDC/Collection

Production type: Midtech
Country of manufacture: USA
Blade: CPM S35VN steel
Blade treatment: Stonewashed
Handle: Flamed titanium
Blade length: 68mm.
Blade thickness: 4mm.
Closed length: 83mm.
Total length: 135mm.
Closed thickness: 12mm.
Weight: 93g.
Closure: Friction Folder (without blade lock)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Notes: knife from a private collection, previously purchased and used, equipped with its original nylon pouch with which it was sold and a small titanium key to be used to adjust the tension and fluidity of the blade opening

Intended use: Sport/Collection
Production type: Industrial cutting - artisanal assembly and finishing
Country of manufacture: Japan
Blade: SanMai steel with VG-10 stainless core (59/60HRC) and 33-layer nickel Damascus outer cheeks
Blade finish: Damascus
Handle: Pakkawood
Blade length: 70mm
Blade thickness: 3mm
Closed length: 95mm
Total length: 167mm
Weight: 66g
Locking mechanism: Liner Lock
Packaging: Fabric bag
Notes: -

Intended use: Collection and EDC (Everyday Carry)
Production type: Industrial
Country of manufacture: USA
Blade: Tru-Sharp™ stainless steel
Blade finish: Mirror polished
Handle: Amber Bone Peach Seed Jig
Blade length: 69mm
Blade thickness: 2.3mm
Closed length: 107mm
Total length: 176mm
Closed thickness: 10mm
Weight: 56g
Locking mechanism: Back Lock
Clip: None
Packaging: Cardboard box with Case logos
Notes: Iconic Case model, available in limited quantities

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new
* Commercially available: Discontinued
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Scabbard: Original, like new
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory.

The Viper Tank is a fixed-blade knife designed to deliver exceptional performance in tactical and outdoor situations. Made in Italy from high-quality materials, this knife combines strength and functionality, making it ideal for outdoor enthusiasts.

The D2 steel blade provides excellent cutting power, while the ergonomic micarta handle ensures a firm and comfortable grip. The MO.L.L.E.-compatible Cordura sheath completes the equipment, allowing safe and convenient carrying.

Intended Use: Utility

Production type: Industrial
Country of production: Italy
Blade: D2 steel at 58/59HRC
Blade Treatment: Aspis Coating
Handle: Canvas Micarta
Blade Length: 155mm.
Blade thickness: 5.8mm.
Total length: 297mm.
Weight: 415g.
Sheath: black Cordura, by Vega Holster, with MOLLE attachments
Packaging: -
Notes: Design by Tommaso Rumici - previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used.
* Condition: Overall in very good condition, damaged scabbard (no lanyard on handle). 
* Commercially available: Discontinued, replaced by “Evolution” versions.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Present but damaged (lacking strap to stop handle).
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Light Utility

Production type: Industrial
Country of Production: Italy
Blade: Carbon steel D2 59/60HRC
Blade Treatment: Black PVD
Handle: Canvas Micarta
Blade Length: 125mm.
Blade thickness: 5.8mm.
Total length: 252mm.
Balance: set back 1cm
Weight: 280g.
Sheath: nylon, thigh-high, M.O.L.L.E. compatible.
Packaging: -
Notes: Design by Tommaso Rumici - previously purchased knife, from a private collection

KNIFE RETRIEVED FROM PRIVATE COLLECTION

• Origin: Retrieved from a private individual, previously purchased
• Condition: In excellent condition
• Commercial Availability: NOT available on the market
• Blade Edge: Original
• Blade Marks: None
• Handle Marks: None
• Box: -
• Sheath: Original
• Manuals, Certificates, and Warranty: -
• Checked and Certified: By our internal laboratory

The Viper Tank Black Aspis VT4004BK is a fixed-blade knife designed to deliver exceptional performance in tactical and outdoor scenarios. Made in Italy with high-quality materials, this knife combines durability and functionality, making it ideal for outdoor enthusiasts and military use. The D2 steel blade with black PVD coating ensures corrosion resistance and excellent cutting ability, while the ergonomic handle in brown canvas impregnated with phenolic resin provides a firm and comfortable grip. The Cordura® sheath compatible with the MO.L.L.E. system completes the equipment, allowing safe and practical transport.

Intended Use: Sporting/Utility

• Type of Production: Industrial
• Blade Production: Italy
• Blade: D2 steel at 58/59HRC
• Blade Treatment: Aspis Coating
• Handle: Canvas Micarta
• Blade Length: 155mm.
• Blade Thickness: 5.8mm.
• Closed Length: -
• Total Length: 297mm.
• Closed Thickness: -
• Balance: -
• Weight: 415g.
• Lock: -
• Clip: -
• Sheath: Black Cordura, by Vega Holster, with MOLLE attachments
• Packaging: 
• Notes: Design by Tommaso Rumici

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Conditions: in like-new condition
* Available on the market: No longer available
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: /
* Manuals, Certificates and Guarantees: NO
* Checked and Certified by our internal laboratory

Designed by the well-known Danish designer Jesper Voxnaes, Odino is a high-end folding knife characterized by the frame lock architecture with a rotation system on bearings and the use of noble and technological materials (frame entirely in titanium and grip in carbon fiber, titanium or G-10). Vox's unique style, influenced by both Scandinavian design and American cutlery, the attention to detail and the excellence of Viper's typical workmanship create an absolutely original and high-level knife.

Intended use: Sporting/EDC

Type of production: Industrial
Blade production: Italy
Blade: Stainless steel N690Co 58/59HRC
Blade treatment: Stonewashed
Handle: Carbon Fiber and Titanium
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 100mm.
Total length: 184mm.
Closed thickness: -
Balance: -
Weight: 125g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

The AITOR Pocket Knife 284.172 Gran Ranchero is a vintage multipurpose knife, renowned for its quality and versatility. Made in Spain between the 80s and 90s, this knife is ideal for camping, hiking and other outdoor activities thanks to its numerous integrated tools.

Main features
Model: 284.172 Gran Ranchero
Manufacturer: AITOR
Origin: Spain
Blade Material: High quality stainless steel
Handle: Durable synthetic material with non-slip finish
Total Length: About 20cm (open)
Closed length: Approx. 11cm
Weight: Lightweight and easy to carry
Multipurpose Tools
Main blade: For cutting and peeling
Corkscrew: For opening bottles of wine
Can opener: For opening cans
Bottle opener: For opening bottles with crown caps
Spoon: Useful for outdoor meals
Fork: To complete the camping cutlery set
Functionality
Compact Design: Easy to carry, fits conveniently in your pocket or backpack
Safe locking system: Ensures that the blades remain in position whether open or closed, reducing the risk of accidents
Ergonomic handle: Offers a secure and comfortable grip
Uses
Outdoor activities: Camping, hiking, fishing
Daily Use: Perfect for small craft jobs and as an emergency tool
Collectibles: A quality piece for vintage knife collectors
Final Considerations

The AITOR Pocket Knife 284.172 Gran Ranchero represents an excellent example of Spanish craftsmanship in the knife industry. With its combination of functionality and durability, it is an excellent choice for anyone who appreciates high-quality tools.

Knife withdrawn from a private collection in excellent condition, uniquely has a small imperfection on the wood at the base of the handle (visible in the close up of the photos) - Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.

The SHINRA MAXIMA series uses the sintered and cryogenically hardened Japanese steel SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Production Lama: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka Wood
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can visit the website: www.collinisteel.com