Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual; previously purchased and used
* Condition: Structure intact, no functional compromises, fully operational and ready for use. Presence of slight surface marks on the finish and signs of age.
* Available on the market: Discontinued
* Sharpening: Factory-sharpened
* Marks on blade: Slight surface marks on the finish
* Marks on handle: None
* Box: /
* Sheath: Nylon, belt-mounted
* Manuals, Certificates, and Warranties: /
* Inspected and Certified by our in-house laboratory

This Mick Strider-signed BT model features a black blade with a knurled thumb rest, a thickness of 6.4mm, and a full-tang construction to ensure maximum strength and durability.

The handle features green MEFP scales with a lanyard hole and an integrated pry bar on the back. Comes complete with a nylon sheath with a belt loop.

Strider Knives

Founded and run by former military personnel, Strider Knives is a company specializing in the development of cutting tools designed to withstand the most extreme operating conditions. The initial goal was to create a reliable utility knife, built with the highest quality materials yet affordable and easy to maintain by field personnel.

Over time, the brand has established itself as a benchmark in the world of tactical and professional knives, thanks to models developed specifically to meet the needs of military personnel, law enforcement, special operations personnel, hunters, and professional divers. Every design stems from a practical and functional approach, focused on maximum durability and reliability in the field.

Intended Use: Tactical / All-Rounder Utility

Production Type: Midtech
Country of Manufacture: USA
Blade: Full tang, CPM-3V crucible steel
Blade Finish: Black Coating
Handle: G10
Blade length: 161mm.
Blade thickness: 6.4mm.
Overall length: 308mm.
Balance: rear-weighted
Weight: 410g.
Sheath: Nylon, belt-mounted
Packaging: -
Notes: Previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Iconic knife handmade in 2021, withdrawn from a private collection, previously purchased
* Condition: in excellent condition, unused and kept solely in a collection
* Available on the market: Currently out of catalog and cannot be ordered/obtained from the craftsman
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: in excellent condition, with signature and date of manufacture
* Manuals, Certificates, and Guarantees: Certificate of guarantee and authenticity with date and technical data of the model
* Checked and certified by our in-house laboratory

THE LEGEND
Jimmy Lile (1933–1991), known as “The Arkansas Knifesmith,” was one of the most important American knife makers of the 20th century. Born in Russellville, Arkansas, he made his first knife at the age of 11 and devoted himself professionally to knife making in 1971.

He is famous for the legendary Rambo knives, designed for real use with 440C blades, hollow handles, and innovative details. He was president of the Knifemakers' Guild, and his works were commissioned by presidents and celebrities.

He died in 1991, leaving a legacy of the highest caliber in custom and collectible knives.

THE PRESENT
Today, the Lile Knives, LLC brand is owned by John Hill of McKinney, Texas. In the 1980s, John was already collaborating with Bob Rankin on the sale of original Rambo knives, and in 2003 he co-authored a book dedicated to Lile's work.

After Jimmy's death, John maintained a strong relationship with Marilyn (Lile) Miller and purchased the Lile brand from her to continue producing high-quality replicas of the movie knives, adhering to custom knife standards and guaranteeing Marilyn royalties.

Since 2011, John Hill has been collaborating with Vaughn Neeley, former owner of Timberline Knives, to produce limited editions of Rambo knives that are prized by collectors. Today, Vaughn produces the entire new “Cerakote™ Series,” while the “Utility Series” is produced under his supervision, keeping alive the tradition and quality of Jimmy Lile's original models.

THE KNIFE
“The Mission” is one of the most iconic survival knives ever made, born from Jimmy Lile's vision to combine extreme functionality and military design.

Featuring a stainless steel blade finished entirely with bead-blasting to eliminate reflections, this model combines tactical aesthetics and real performance.

The back is equipped with aggressive serrations, while the hollow handle, wrapped in paracord, integrates a compass and allows for the transport of small tools.

The multifunction guard features screwdriver tips, making it a complete survival tool. Produced in a limited edition, “The Mission” represents the perfect synthesis between a combat knife, field tool, and collector's item.

Intended use: Collection / Survival

Type of production: entirely handmade
Country of production: USA
Blade: CPM-154CM stainless steel
Blade treatment: Titanium Grey Cerakote
Handle: 316 stainless steel, hollow, waterproof, paracord coated; 316 stainless steel through guard; screw-in aluminum tang with integrated glass breaker and Pyser Optics NATO internal compass
Blade length: 253mm.
Blade thickness: 7 mm.
Total length: 393 mm.
Weight: 573 g.
Sheath: black leather, belt-mounted, for vertical carry, with craftsman's signature and date of manufacture
Packaging: supplied with warranty certificate with date of manufacture and technical details
Notes: iconic knife used in the Rambo films, entirely handmade, with LILE logos and serial number. Previously purchased, never used, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Iconic knife from 1981, withdrawn from a private collection, previously purchased
* Condition: Overall in good condition, mechanically perfect, shows some signs of wear on the nickel silver handle and micarta inserts; the blade shows signs of mechanical friction on the back due to opening and closing in the handle
* Available on the market: Not available, craftsman no longer in business
* Sharpness: Factory sharp
* Marks on blade: Small marks due to age and friction when opening and closing the blade
* Marks on handle: Several signs of wear visible on the nickel silver handle and micarta inserts
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: 1981 warranty certificate from Coltelleria G. Lorenzi in Via Montenapoleone, Milan
* Checked and certified by our in-house laboratory

In the 1980s, Jimmy Lile developed an elegant folding knife with a button lock mechanism, known as the “Lile Lock.” This patented system consists of a front button on the handle that unlocks the blade when opening and locks it in the cutting position, ensuring safety and ease of use. The monolithic nickel-silver guides support the D2 steel blade, while the micarta inserts on the scales give the knife a refined look.

This is a generously sized knife, produced in limited quantities between the 1970s and 1980s. The numbered examples bearing engravings such as the patent number 4148140 are now highly sought-after collector's items of great economic value.

This folding model represents a perfect balance between functionality and collectible design: compact and easy to handle, with a reliable lock, high-quality materials, and meticulous details, embodying Lile's attention to craftsmanship even in a context other than the famous survival knife.

Intended use: Collectible / Sports

Type of production: Entirely handmade
Country of production: Arkansas / USA
Blade: D2 steel
Blade treatment: Satin finish
Handle: Nickel Silver handle with Red Micarta inserts and stainless steel rear spacer
Blade length: 90mm.
Blade thickness: 4.5 mm.
Closed length: 124 mm
Total length: 212 mm.
Weight: 198 g.
Closure: Lile Lock (Button Lock)
Packaging: supplied with a 1981 warranty certificate from the historic “Coltelleria G. Lorenzi” in Via Montenapoleone, Milan
Notes: extremely rare knife from 1981, previously purchased, withdrawn from a private collection, serial number 447 engraved on the blade and patent number “U.S. Patent No. 4148140” engraved on the back of the button lock.

Intended use: Sport/Collection
Production type: Industrial cutting - artisanal assembly and finishing
Country of manufacture: Japan
Blade: SanMai steel with VG-10 stainless core (59/60HRC) and 33-layer nickel Damascus outer cheeks
Blade finish: Damascus
Handle: Pakkawood
Blade length: 70mm
Blade thickness: 3mm
Closed length: 95mm
Total length: 167mm
Weight: 66g
Locking mechanism: Liner Lock
Packaging: Fabric bag
Notes: -

Intended use: Collection and EDC (Everyday Carry)
Production type: Industrial
Country of manufacture: USA
Blade: Tru-Sharp™ stainless steel
Blade finish: Mirror polished
Handle: Amber Bone Peach Seed Jig
Blade length: 69mm
Blade thickness: 2.3mm
Closed length: 107mm
Total length: 176mm
Closed thickness: 10mm
Weight: 56g
Locking mechanism: Back Lock
Clip: None
Packaging: Cardboard box with Case logos
Notes: Iconic Case model, available in limited quantities

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: 2001 knife, discontinued, featuring asymmetrical/chisel sharpening
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small marks from time.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Military

Type of production: industrial
Blade: 154CM stainless steel with asymmetric/chisel sharpening
Blade finish: Stone Washed
Country of manufacture: USA
Handle: G-10 with titanium liners
Blade length: 72mm.
Blade thickness: 3mm.
Length closed: 105mm.
Total length: 180mm.
Weight: 92g.
Closure: Liner Lock
Clip: burnished stainless steel, removable
Notes: knife from 2001 discontinued, previously purchased, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new
* Commercially available: Discontinued
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Scabbard: Original, like new
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory.

The Viper Tank is a fixed-blade knife designed to deliver exceptional performance in tactical and outdoor situations. Made in Italy from high-quality materials, this knife combines strength and functionality, making it ideal for outdoor enthusiasts.

The D2 steel blade provides excellent cutting power, while the ergonomic micarta handle ensures a firm and comfortable grip. The MO.L.L.E.-compatible Cordura sheath completes the equipment, allowing safe and convenient carrying.

Intended Use: Utility

Production type: Industrial
Country of production: Italy
Blade: D2 steel at 58/59HRC
Blade Treatment: Aspis Coating
Handle: Canvas Micarta
Blade Length: 155mm.
Blade thickness: 5.8mm.
Total length: 297mm.
Weight: 415g.
Sheath: black Cordura, by Vega Holster, with MOLLE attachments
Packaging: -
Notes: Design by Tommaso Rumici - previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used.
* Condition: Overall in very good condition, damaged scabbard (no lanyard on handle). 
* Commercially available: Discontinued, replaced by “Evolution” versions.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Present but damaged (lacking strap to stop handle).
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Light Utility

Production type: Industrial
Country of Production: Italy
Blade: Carbon steel D2 59/60HRC
Blade Treatment: Black PVD
Handle: Canvas Micarta
Blade Length: 125mm.
Blade thickness: 5.8mm.
Total length: 252mm.
Balance: set back 1cm
Weight: 280g.
Sheath: nylon, thigh-high, M.O.L.L.E. compatible.
Packaging: -
Notes: Design by Tommaso Rumici - previously purchased knife, from a private collection

KNIFE RETRIEVED FROM PRIVATE COLLECTION

• Origin: Retrieved from a private individual, previously purchased
• Condition: In excellent condition
• Commercial Availability: NOT available on the market
• Blade Edge: Original
• Blade Marks: None
• Handle Marks: None
• Box: -
• Sheath: Original
• Manuals, Certificates, and Warranty: -
• Checked and Certified: By our internal laboratory

The Viper Tank Black Aspis VT4004BK is a fixed-blade knife designed to deliver exceptional performance in tactical and outdoor scenarios. Made in Italy with high-quality materials, this knife combines durability and functionality, making it ideal for outdoor enthusiasts and military use. The D2 steel blade with black PVD coating ensures corrosion resistance and excellent cutting ability, while the ergonomic handle in brown canvas impregnated with phenolic resin provides a firm and comfortable grip. The Cordura® sheath compatible with the MO.L.L.E. system completes the equipment, allowing safe and practical transport.

Intended Use: Sporting/Utility

• Type of Production: Industrial
• Blade Production: Italy
• Blade: D2 steel at 58/59HRC
• Blade Treatment: Aspis Coating
• Handle: Canvas Micarta
• Blade Length: 155mm.
• Blade Thickness: 5.8mm.
• Closed Length: -
• Total Length: 297mm.
• Closed Thickness: -
• Balance: -
• Weight: 415g.
• Lock: -
• Clip: -
• Sheath: Black Cordura, by Vega Holster, with MOLLE attachments
• Packaging: 
• Notes: Design by Tommaso Rumici

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Conditions: in like-new condition
* Available on the market: No longer available
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: /
* Manuals, Certificates and Guarantees: NO
* Checked and Certified by our internal laboratory

Designed by the well-known Danish designer Jesper Voxnaes, Odino is a high-end folding knife characterized by the frame lock architecture with a rotation system on bearings and the use of noble and technological materials (frame entirely in titanium and grip in carbon fiber, titanium or G-10). Vox's unique style, influenced by both Scandinavian design and American cutlery, the attention to detail and the excellence of Viper's typical workmanship create an absolutely original and high-level knife.

Intended use: Sporting/EDC

Type of production: Industrial
Blade production: Italy
Blade: Stainless steel N690Co 58/59HRC
Blade treatment: Stonewashed
Handle: Carbon Fiber and Titanium
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 100mm.
Total length: 184mm.
Closed thickness: -
Balance: -
Weight: 125g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Yes, but only in stonewashed "Thunderstorm" finish.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory




Intended Use: Sporting

Type of production: industrial
Blade: stainless steel 154CM
Blade finish: dual tone (satin and stone washed)
Country of manufacture: USA
Handle: G10 and titanium liners
Blade length: 76mm.
Blade thickness: 3.2mm.
Length closed: 104mm.
Total length: 183mm.
Weight: 114g.
Closure: Liner Lock
Clip: removable, stainless steel
Notes: Collected specimen from private collection, absolutely like new

Knife withdrawn from a private collection in excellent condition, uniquely has a small imperfection on the wood at the base of the handle (visible in the close up of the photos) - Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.

The SHINRA MAXIMA series uses the sintered and cryogenically hardened Japanese steel SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Production Lama: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka Wood
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can visit the website: www.collinisteel.com