Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows some barely noticeable signs of aging on the Zytel handle and a couple of small spots of oxidation on the tip of the blade (right side), which in no way compromise its practical use
* Commercially available: Discontinued
* Sharpness: Factory-sharpened; could be improved
* Marks on blade: A couple of small spots of oxidation on the tip of the blade, on the right side, which in no way compromise its practical use
* Marks on handle: A few barely noticeable signs of aging
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

Intended use: sports / collectible

Production type: Industrial
Country of manufacture: Japan
Blade: VG-10 stainless steel
Blade finish: Satin
Handle: Zytel, with stainless steel liners
Blade length: 90 mm.
Blade thickness: 4 mm.
Closed length: 120 mm.
Overall length: 210 mm.
Thickness when closed: 20 mm.
Weight: 135 g.
Closure: Arc-Lock (crossbar lock)
Clip: removable, stainless steel
Packaging: -
Notes: Previously purchased knife, from a private collection

PREVIOUSLY PURCHASED AND USED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased and used
* Condition: Good overall condition, with evident signs of age and use
* Commercial availability: Discontinued
* Sharpening: Resharpened
* Marks on blade: Present, with scratches, abrasions and surface dulling consistent with age and use
* Marks on handle: Present, with natural patina and signs of use on the stacked leather washers
* Box: -
* Sheath: Present, original leather sheath, heavily used and showing signs of age
* Manuals, Certificates and Warranties: -
* Inspected and Certified by our in-house laboratory

The SOG S1 Bowie Vietnam 5th Special Forces Group is one of the most representative knives in the history of SOG Specialty Knives and the model with which the American brand began its production during the second half of the 1980s. Made in Seki, Japan, the S1 was created as a tribute to the famous knives used by members of the Military Assistance Command, Vietnam – Studies and Observations Group (MACV-SOG) during the Vietnam War.

It is important to distinguish the S1 from the original “sterile” military knives actually used operationally during the conflict: the commercial SOG model instead reproduces the commemorative configuration of the famous MACV-SOG Bowie, featuring the U.S. Army Special Forces crest on the blade together with the marking “VIETNAM 5th SPECIAL FORCES GROUP”. This strong historical identity, combined with the quality of Japanese manufacturing, has made it one of the most recognizable and sought-after vintage SOG knives among collectors.

Production was entrusted to Ichiro Hattori in Seki, one of the most important names in Japanese knifemaking. The substantial Bowie blade is made from SK-5 carbon steel, hardened to approximately 57-58 HRC, with the characteristic dark gun-blue finish combined with polished surfaces. The handle uses traditional stacked leather washers stabilized with epoxy resin, completed by a sturdy metal guard and pommel.

This example features the classic SOG Specialty Knives logo on one side of the ricasso and, on the opposite side, the markings “SEKI-JAPAN”, the Special Forces crest and the inscription “VIETNAM 5th SPECIAL FORCES GROUP”. It is also accompanied by its original black leather sheath, complete with sharpening stone pocket and a large Special Forces crest embossed on the lower section. The original period identification label is still present on the back of the sheath.

The example offered here comes from a private collection and has actually been used. The blade shows scratches, abrasions and surface marks, both on the blued and polished areas; the leather handle has developed a noticeable patina and shows wear consistent with its age. The original sheath is also heavily used, with leather wear, marks and widespread abrasions. Its condition should therefore be considered good in relation to its age and nature, but it should not be compared with a display-grade or NOS example.

These very characteristics tell the story of an authentic SOG S1 made in Seki: a knife that, regardless of its cosmetic condition, retains all the appeal of one of the founding models of the brand and today represents a particularly significant piece for a collection dedicated to American military knives and Japanese SOG production from the 1980s and 1990s.

Intended use: Military / Collection
Production type: Industrial
Model: S1 Bowie - Vietnam 5th Special Forces Group
Country of manufacture: Seki - Japan
Model production period: 1986 - 2005
Blade: SK-5 carbon steel
Hardness: 57-58 HRC
Blade finish: Gun-blue / polished
Blade profile: Bowie
Edge: Plain
Handle: Stacked leather washers stabilized with epoxy resin
Guard and pommel: Metal
Blade length: Approx. 159mm
Blade thickness: Approx. 7.1mm
Overall length: Approx. 273mm
Weight: Approx. 349g
Sheath: Original black leather sheath with sharpening stone pocket and Special Forces crest
Notes: Previously purchased and used knife, from a private collection

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private seller, previously purchased
* Condition: In excellent mechanical condition - good cosmetic condition
* Commercially available: Discontinued
* Sharpening: Professionally resharpened
* Marks on blade: Several signs of oxidation on the blade and minor abrasions, which do not compromise its practical use
* Marks on handle: None
* Box: Missing
* Sheath: In excellent condition
* Manuals, Certificates, and Warranties: None
* Inspected and certified by our in-house laboratory

Intended Use: Tactical

Manufacturing Type: Industrial
Country of Manufacture: USA
Blade: Full tang, CPM-S30V steel
Blade Finish: Tungsten DLC
Handle: G-10 with 3D machining
Blade length: 105 mm.
Blade thickness: 4.5 mm.
Overall length: 205 mm.
Balance: 1.5 cm rearward
Weight: 264 g.
Sheath: thermoformed Kydex
Notes: designed by Mick Strider

KNIFE FROM A PRIVATE COLLECTION
* Origin: Previously purchased knife from a private collection
* Condition: 2008 model, overall in excellent condition
* Commercial Availability: Discontinued
* Sharpness: Factory-sharpened, could be improved
* Blade Condition: Minor cosmetic marks on the DLC finish due to age
* Handle Condition: None
* Box: -
* Sheath: Included
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The Zero Tolerance 0100 is one of the first knives produced by Zero Tolerance, the premium division of Kai USA, which was launched in 2006 to develop professional tools for military personnel, law enforcement, and first responders. The 0100 model was, in fact, one of the first three fixed-blade knives in the original lineup, alongside the 0121 and 0150 models.

The design bears the unmistakable stylistic signature of Ken Onion, the renowned American designer already responsible for numerous successes at Kershaw. The distinctive “S”-curved blade offers an unusual combination of cutting ability, power, and precision, making the ZT0100 suitable for both tactical applications and the most demanding outdoor use.

For its construction, Zero Tolerance chose CPM 3V, a steel then considered cutting-edge for its strength and impact resistance, paired with a tungsten DLC coating and three-dimensionally machined G-10 scales. This combination helped solidify the brand’s early reputation as a manufacturer of “overbuilt” knives, designed without compromise for field use.

Today, the ZT 0100 is a discontinued model particularly prized by collectors, as it is considered one of the knives that helped define the Zero Tolerance brand’s identity in its early years.

Intended Use: Tactical / Sporting / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Full tang, CPM-3V carbon steel
Blade Finish: Tungsten DLC coating
Handle: G10
Blade Length: 146mm.
Blade thickness: 4.8 mm.
Overall length: 267 mm.
Weight: 317 g.
Sheath: Nylon, belt-mounted, with thermoformed Kydex lining
Packaging: -
Notes: Previously purchased knife, from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Like new
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, could be improved
* Marks on blade: None
* Marks on handle: None
* Box: Included
* Sheath: Included
* Manuals, Certificates, and Warranties: Included
* Inspected and Certified by our in-house laboratory

The SOG Forge FG01-L is a knife of extraordinary beauty and build quality, combining Japanese craftsmanship with modern production techniques.

The blade, forged using a hammering technique, features a unique texture that is one-of-a-kind for each piece. It is made of San Mai steel, with a VG-10 cutting edge and 420J2 outer layers, a combination that ensures an excellent balance between sharpness, edge retention, and durability.

The glass-reinforced nylon (GRN) handle is designed with perfectly contoured inserts to provide optimal balance and a secure, comfortable grip. The knife is complemented by an elegant premium leather sheath, enhanced with a colored fabric insert and a button closure.

Manufactured in Japan, the SOG Forge FG01-L evokes an era when honor and master craftsmanship were fundamental values. An object that is not merely a tool, but a true collector’s item destined to stand the test of time and be passed down from generation to generation.

Intended Use: Collectible / Sport

Production Type: Industrial
Country of Origin: Seki - Japan
Blade: SanMai laminated stainless steel with a VG-10 cutting edge and 420J2 outer layers, featuring a concave grind
Blade Finish: Hammered and Brut de Forge with a satin-finished portion of the cutting edge
Handle: Three-dimensionally shaped GRN (Glass Reinforced Nylon)
Blade Length: 160mm.
Blade thickness: 5 mm.
Overall length: 275 mm.
Weight: 290 g.
Sheath: Leather, with an insert of fine Japanese fabric, which varies from sheath to sheath
Packaging: Cardboard box with SOG logos
Notes: Knife from a private collection, previously purchased

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Like new, never used, no packaging
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Tigerstripe black-oxide BlackWash
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: knife previously purchased and used, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, NOS (new old stock), never used or removed from its original box
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present and perfect
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

Created in 1986 as the second official model of the newly formed SOG Specialty Knives, the S2 Trident is not just a knife, but a bridge between the past and the present. Designed in honor of the Navy SEALs and special units that operated in Vietnam, it draws direct inspiration from the legendary MACV-SOG knives of the 1960s, “sterilized” and lethal tools used in the most secret missions of the conflict.

Produced during the company's golden age in Seki, Japan, the Trident combines elegant lines and combat functionality: a thick, balanced AUS-8 steel Bowie blade with impeccable satin finish; ergonomic and durable black micarta stacked washer handle; and the engraved Navy SEAL symbol, a seal of belonging to an elite group. The leather sheath with sharpening stone completes a package designed for operators and collectors.

The S2 Trident is the most refined tribute to SOG's operational past: a homage to the military tradition of Vietnam reinterpreted with Japanese craftsmanship. Today, with a very high rarity index, it is considered one of the most sought-after pieces by military knife collectors, not only for its build quality, but for the history embodied in its blade.

Intended use: Military / Collection

Type of production: industrial
Country of production: Seki - Japan
Blade: AUS-8 stainless steel
Blade finish: Satin
Handle: Stacked micarta rings
Blade length: 160mm.
Blade thickness: 6 mm.
Total length: 278 mm.
Balance: rearward, 1 cm from the guard
Weight: 312 g.
Sheath: leather with pocket for sharpening stone (included)
Notes: previously purchased knife from a private collection

Intended use: Collection and EDC (Everyday Carry)
Production type: Industrial
Country of manufacture: USA
Blade: Tru-Sharp™ stainless steel
Blade finish: Mirror polished
Handle: Amber Bone Peach Seed Jig
Blade length: 69mm
Blade thickness: 2.3mm
Closed length: 107mm
Total length: 176mm
Closed thickness: 10mm
Weight: 56g
Locking mechanism: Back Lock
Clip: None
Packaging: Cardboard box with Case logos
Notes: Iconic Case model, available in limited quantities

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never used
* Commercially available: Handcrafted, one-of-a-kind, no longer in production
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Bud Nealy's MCS II System knives are designed to be compact and lightweight, with a focus on low weight. The MCS System, developed in the 1980s, offers great versatility in carrying thanks to a Kydex sheath that can be adapted with five different attachments (included), allowing nine carrying positions. Ambidextrous use of the system is possible.

The MCS System has been improved with the MCS II, which incorporates 3M Dual Lock attachment systems with five times the adhesion strength of classic Velcro. This version further increases versatility and allows transport positions to be configured more quickly. The system offers options for both on-body and off-body carrying.

Intended Use: Tactical/Collection/Neck Knife/CQD

Country of manufacture: USA
Type of production: Handcrafted
Blade: CPM-S30V satin-finished stainless steel
Handle: G10
Blade length: 125mm.
Blade thickness: 3mm.
Total length: 230mm.
Balance: Backward
Weight: 120g.
Scabbard: Ultra flat Kydex scabbard with MCS II multi-carry and attachment system developed by Bud Nealy
Notes: Entirely handmade - 2004 model - Serial #7307

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition, knife only, no box and accessories.
* Commercially available Discontinued since the late 1990s.
* Sharpening: Factory.
* Marks on blade: A few small marks given by time.
* Marks on handle: A few small marks given by time.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratory.

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.

Intended Use: Tactical/Collection
Production Type: Industrial
Country of Production: USA
Blade: 154CM stainless steel with titanium nitriding
Handle: aircraft aluminum with non-slip Kraton inserts
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 197mm.
Thickness when closed: 13mm
Weight: 108g.
Closure: Button Lock
Clip: removable, stainless steel
Packaging: knife withdrawn from private collection, overall in very good condition

Knife withdrawn from a private collection

• Origin: Withdrawn from a private owner, previously purchased and used
• Condition: Like new
• Availability: Discontinued
• Factory edge: Yes
• Blade marks: None
• Handle marks: None
• Box: Not included
• Sheath: Not included
• Manuals, Certificates, and Warranties: Not included
• Inspected and certified by our internal laboratory

One of our first ZT models and still one of the most popular, now offered in a limited edition with a CPM-MagnaCut steel blade.

The 0350 is a large and aggressive knife, yet compact and light enough to make it a practical and highly effective EDC. It features ZT's assisted opening system: the blade deploys quickly and easily, even with gloves, thanks to the ambidextrous flipper. The blade is finished with a bold and distinctive tiger-stripe pattern created with tungsten DLC coating.

Intended use: Tactical / Military

• Production type: Industrial
• Country of origin: USA
• Blade material: CPM-MagnaCut steel
• Blade finish: Tungsten DLC Coating
• Handle: G-10
• Blade length: 90mm
• Blade thickness: 3mm
• Closed length: 115mm
• Overall length: 195mm
• Closed thickness: 13mm
• Weight: 162g
• Locking mechanism: Liner Lock
• Clip: Removable, multi-position, stainless steel
• Packaging: Not included
• Notes: Sprint Run edition with CPM-MagnaCut steel - Design by Mick Strider and Ken Onion - SpeedSafe opening system

KNIFE RETRIEVED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private owner, previously purchased
* Condition: Like new, never taken out of its box
* Market Availability: Hard to find
* Factory Edge: Yes
* Blade Marks: None
* Handle Marks: None
* Box: Original, with logos and accessories
* Sheath: Included
* Manuals, Certificates & Warranty: Complete set included
* Inspected and Certified by our internal laboratory

The Halfbreed Blades HBBLBK01OD is a high-end tactical knife designed to withstand the most extreme conditions. Built with a solid full-tang blade made of Böhler K110 steel, it provides excellent wear resistance and outstanding cutting performance. The 146 mm blade is coated with OD Green Teflon (PTFE), reducing friction and protecting the steel from corrosion.

The handle, made of black G10, ensures a secure grip in any situation, while the crusher pommel with an integrated fire starter adds extra functionality for survival scenarios. The design also features a lanyard hole and a bow drill system on both sides of the handle, making it ideal for survival use.

Supplied with a Kydex MOLLE-compatible sheath, the Halfbreed Blades HBBLBK01OD is perfect for tactical operators, military personnel, and outdoor enthusiasts looking for an indestructible and high-performance knife. Made in Australia, this tool embodies reliability and uncompromising toughness.

Technical Specifications
Intended Use: Tactical, Survival, Military
Production Type: Industrial
Country of Manufacture: Australia
Blade: Böhler K110 Steel
Blade Finish: PTFE (OD Green Teflon)
Handle: Black G10
Blade Length: 146 mm
Blade Thickness: 6.5 mm
Total Length: 286 mm
Weight: 541 g
Locking Mechanism: Full-Tang (Fixed Blade)
Clip: -
Packaging: Halfbreed Blades Box + Kydex MOLLE-compatible Sheath
Notes: Lanyard hole, Crusher pommel with fire starter, Bow drill on both sides of the handle

KNIFE RETIRED FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private owner, previously purchased and no longer in production
• Condition: Overall in excellent condition
• Commercial Availability: NOT commercially available
• Edge: Original
• Blade marks: None
• Handle marks: None
• Box: -
• Sheath: -
• Manuals, Certificates, and Warranties: -
• Inspected and Certified: by our internal laboratory

The SOG Mini-Vulcan VL-02 is a high-quality folding knife designed to meet the needs of knife enthusiasts and demanding users. Engineered to combine durability, functionality, and refined design, this model is the perfect blend of advanced engineering and precision craftsmanship.

The VG-10 steel blade, extremely sharp and corrosion-resistant, ensures flawless performance both in outdoor settings and daily tasks. The patented Arc-Lock opening mechanism from SOG offers secure and smooth closure while ensuring speed and ease of use.

Compact and lightweight, the Mini-Vulcan is perfect for those seeking a versatile, reliable, and easy-to-carry knife. Whether you’re a collector, hiker, or professional, this knife will be an essential companion, ready to tackle the challenges of any day.

Intended Use: Sporting

Production Type: Industrial
Blade Production: Japan
Blade: VG-10 stainless steel
Blade Treatment: -
Handle: Zytel and steel liners
Blade Length: 78mm
Blade Thickness: 3mm
Closed Length: 109mm
Overall Length: 187mm
Closed Thickness: 20.3mm
Balance: -
Weight: 104g
Locking Mechanism: Arc Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: -
Notes: -

The SOG Winder II Heavy Duty Folding Knife (model SOG00009) exemplifies high quality and precision in knife making. With a blade length of 8.8 cm and a thickness of 4.7 mm, it is perfect for all kinds of tasks, providing excellent performance in cutting, slicing and piercing. The black textured Kraton handle provides an excellent grip, while the sturdy Lockback mechanism ensures safety during use.

The knife has an ambidextrous design, making it easy for both left- and right-handed people to use, and its compactness (11.4 cm when closed) makes it convenient to carry in a pocket or backpack. Made in Seki, Japan, a city with a long tradition of knife making, the Winder II is synonymous with high quality and craftsmanship.

Purchased in 1994 from the well-known Hoffritz cutlery chain in New York and now discontinued, it is a collector's item of great historical value. This knife, from a private collection, shows no signs of use, and is a prized piece for enthusiasts and collectors.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: In very good condition, with normal signs due to time
* Commercially available: 1994 knife - Discontinued model
* Sharpening: Factory.
* Marks on blade: Normal marks given by the opening and closing of the blade.
* Marks on handle: No.
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Collection

Production Type: Industrial
Country of Production: Japan
Blade: stainless steel AUS-8
Blade finish: satin finish
Handle: stainless steel and kraton
Blade length: 88mm.
Blade thickness: 4.7mm.
Length closed: 114mm.
Total length: 205mm.
Weight: 220g.
Closure: back-Lock
Notes: previously purchased 1994 knife, discontinued, in excellent condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collector, previously purchased
* Condition: Overall in excellent condition
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None (the visible stains in the photo are oil on the blade)
* Handle marks: None
* Box: Not available
* Sheath: Present, in Nylon
* Manuals, Certificates, and Warranties: Not available
* Checked and Certified by our internal laboratory

The MARK I is an innovative tactical/military knife, designed by Duane Dieter, produced in the late '90s and has immediately become an icon in the knife-making world.

Master of Defense, an eclectic American brand that is no longer active and was later acquired by Blackhawk! Blades, produced various folding and fixed tactical and military knives, all created in collaboration with well-known knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson, and Casillas.

Intended use: Tactical / Collection
Type of production: Industrial
Country of production: USA
Blade: 154CM stainless steel with titanium nitride coating
Handle: Aerospace-grade aluminum with non-slip inserts - seatbelt cutter and skull-crusher
Blade length: 95mm.
Blade thickness: 3.5mm.
Total length: 247mm.
Weight: 122g.
Lock: Button Lock with additional safety system
Clip: Removable and reversible, in stainless steel
Sheath: Belt nylon sheath
Packaging: No packaging

Exclusive product created in collaboration with the PDT YouTube channel - The Cutthroat's Park. This unique knife was actually used in a field test that you can view directly in this product sheet.

To make it even more special, we engraved Floriano's autograph and the PDT logo on the blade. The box of the knife was also autographed by Floriano making it a must-have collector's item.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: Floriano of the PDT Parchetto del Tagliagole.
* Condition: Overall in good condition.
* Commercially available: Still in catalog.
* Sharpening: Factory sharpened, stropped by Floriano after use.
* Marks on blade: Signs of concrete use on blade finish.
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: USA
Blade: full tang in CPM-3V steel
Blade treatment: Microbead blasting and Cerakote
Handle: G10 with stainless steel guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex
Packaging: cardboard box with ZT logos.
Notes: knife used in a YouTube video review by Floriano of PDT

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, minor marks on clip and hardware.
* Commercially available: Discontinued
* Sharpening: Factory sharpened, can be improved.
* Marks on blade: None
* Marks on handle: Small marks on clip and hardware.
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: / /
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Sporting

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel S35VN
Blade finish: Satin finish
Handle: G10 and Titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Total length: 216mm.
Thickness when closed: 13mm.
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Packaging: not present
Notes: previously purchased knife from a private collection - made in collaboration with Emerson Knives - Patented Wave opening system

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION

* Origin: Withdrawn from a private individual, previously purchased
* Condition: like new
* Commercially available: no longer in production
* Sharpening: original
* Marks on blade: -
* Marks on handle: -
* Box: NO
* Sheath: NO
* Manuals, Certificates and Guarantees: NO
* Checked and Certified by our internal laboratory

Intended use: Tactical/Military

Type of production: Industrial
Blade production: USA
Blade: CTS204P stainless steel
Blade treatment: -
Handle: Carbon Fiber and Titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Total length: 216mm.
Thickness when closed: 13mm.
Balance: -
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, in stainless steel
Sheath: -
Packaging: cardboard box with Zero Tolerance logos
Notes: in collaboration with Emerson Knives - Patented Wave opening system

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: Japan
Blade: VG10 stainless steel
Blade Finish: Black TiNi
Handle: Zytel with steel liners
Blade Length: 78mm.
Blade thickness: 3mm.
Length closed 109mm.
Total length: 187mm.
Thickness when closed: 20.3mm.
Weight: 104g.
Closure: Arc Lock
Clip: removable, stainless steel
Scabbard: -
Packaging: cardboard box with SOG logos
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Commercially available: discontinued
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original ZT box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: USA
Blade: CTS-204P stainless steel
Blade treatment: stone washed and satin finish
Handle: Titanium with anodized spacers
Blade length: 87mm.
Blade thickness: 4mm.
Closed length: 112mm.
Total length: 193mm.
Thick when closed: 14mm.
Weight: 178g.
Closure: Framelock
Clip: Removable, reversible, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmirty Sinkevich - KVT opening on ball bearings

Knife withdrawn from private collection - Overall in good condition, has some minor wear marks on the aluminum handle. On the other hand, the blade is in excellent condition and still has the factory sharpening - The knife is without packaging and certificates, but comes with the original Nylon sheath - Checked and certified by our in-house laboratory.




Innovative tactical/military knife, designed by Duane Dieter, produced in the late 1990s and immediately became an icon in the cutlery scene.

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.




Intended Use: Tactical/Collection
Production type: Industrial
Country of manufacture: USA
Blade: 154CM stainless steel with titanium nitriding
Handle: aircraft grade aluminum with non-slip and skull-crasher inserts
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 200mm.
Weight: 122g.
Closure: Button Lock with additional safety system
Clip: removable and reversible, stainless steel
Sheath: made of Nylon with MOLLE attachments

Knife from a private collection - Iconic and sought after model designed by Ken Onion and Mick Strider - Out of production and no longer available - Perfect in all, like new, serial 1544, does not have any kind of sign or defect - The knife shows an uncertainty at the tip, on the sharpening, which is slightly different; presumably already produced in this way by ZT - The sharpening is good and shows no signs of wear, presumably the sharpening is the original factory - Accompanied by original Zero Tolerance box, but referred to the model 0301 with green G10 handle - Checked and certified by our internal laboratory

Intended Use: Collection / Tactical / Military

Production type: Industrial
Country of Production: USA
Blade: Steel CPM-S30V
Blade Finish: Tigerstripe - Tungsten DLC Coating
Handle: Titanium and G-10 with 3D finish
Blade Length: 95mm.
Blade thickness: 4mm.
Length closed: 133mm.
Total length: 218mm.
Thickness when closed: 17mm.
Weight: 232g.
Closure: Frame Lock
Clip: Removable, Multiposition, Stainless Steel
Package: Cardboard box with Zero Tolerance logos (the box refers to a different model, 0301)
Notes: Design by Mick Strider and Ken Onion - SpeedSafe opening system - Like new - Retired from prvated collection

handcrafted knife entirely handmade with grinding wheel and file. The blade is made of ledeburitic steel with 2.3% carbon obtained by powder metallurgy and reaches a hardness of 64 HRC. Perfect for hunting and outdoor use.

Intended use: collection / hunting

Type of production: custom
Production Lama: USA
Blade: 64HRC powder steel
Blade treatment: -
Handle: in deer horn and tuya burl with brass guard
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 172g.
Sheath: in brown leather sewn and handmade
Notes: knife made in Italy in the late 90s - certificate of the craftsman

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No
* Sharpening: YES
* Marks on blade: No
* Marks on handle: No
* Box: wooden
* Sheath: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory

Type of production: Industrial
Blade: 440A steel
Blade Treatment: -
Handle: G10 Black
Blade length: 80mm.
Blade thickness: 3mm.
Total length: 195mm.
Weight: 80g.
Note: -

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: In like new condition
* Commercially available: No
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Yes original
* Manuals, Certificates and Guarantees: Yes
* Checked and Certified by our internal laboratory

Intended use: Sports
Type of production: Industrial
Blade production: Japan
Blade: laminated stainless steel with VG-10 cutting edge
Blade Treatment: -
Handle: Zytel and steel liners
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed length 123mm.
Total length: 210mm.
Closed thickness: 21.5mm.
Balancing: -
Weight: 144g.
Closure: Arc Lock
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with SOG logos
Note: -

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased - knife no longer in production since
* Condition: in excellent condition, like new
* Commercially available: difficult to find
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original Sog box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: Japan
Blade: VG-10 stainless steel
Blade treatment: -
Handle: GRN
Blade length: 74mm.
Blade thickness: 2.5mm.
Closed length: 114mm.
Total length: 178mm.
Thick when closed: 7mm.
Balancing: -
Weight: 113g.
Closure: Arc-Lock Pendulum
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with SOG logos
Note: -