Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini
-
Randall Knives - Model 1-7 - Micarta Finger Grooves - Private
The Randall Model 1 Fighter was one of the first models produced in Randall's Orlando workshop. A Model 1, personally made by Bo Randall, served as the prototype for the Springfield Randall, produced by the Northampton Cutlery Company near Springfield, Massachusetts, in 1943 and 1944 for issue to American military personnel.
Since World War II, Randall knives have been among the world's best-known handmade knives and are still produced in the family-run Orlando workshop, much in the same way Bo made his knives in the late 1930s and early 1940s. The company has been managed by Bo's son Gary since 1970, currently joined by his sons Jason and Michael.
KNIFE FROM A PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Sheath: original, leather, in excellent condition
* Manuals, Certificates and Warranties: -
* Inspected and Certified by our in-house workshop
Intended use: tactical / military
Production type: handmade
Country of manufacture: USA
Blade: full tang in 440B stainless steel
Blade finish: satin
Handle: full brass guard and one-piece Micarta handle
Blade length: 177mm.
Blade thickness: 5mm.
Overall length: 297mm.
Balance: on the guard branch
Weight: 358g.
Sheath: belt sheath, brown leather
Notes: previously purchased knife, acquired from a private collectionAP-RK-1-7-MFG€0.00Only 0 leftOnly 0 left
Out of stock -
Andre De Villiers ADV - Ronin Hybrid Folder - Satin CPM-S35VN & Tan G10 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: Difficult to find / Made to order
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Nylon pouch with zip
* Sheath: /
* Manuals, Certificates, and Warranties: /
* Checked and certified by our in-house laboratoryIntended use: collection/sport/military
Type of production: MidTech
Country of production: South Africa
Blade: CPM S35VN steel
Blade treatment: Satin
Handle: titanium and G10
Blade length: 103mm.
Blade thickness: 4.5mm.
Closed length: 132mm.
Total length: 234mm.
Closed thickness: 14mm.
Balance: on the guard
Weight: 168g.
Opening: Carson Flipper type, on ball bearings
Locking Mechanism: FrameLock with additional slider safety
Clip: titanium, machined from solid
Packaging: Cordura case with ADV Tactical logos
Notes: Previously purchased knife from a private collectionADV-RH-TG10-CP€0.00Only 0 leftOnly 0 left
Out of stock -
Kanetsune Shinobi KB-209 Knife – Japanese Handmade Fixed Blade Knife
KNIFE RETRIEVED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private collector, previously purchased
* Condition: As new, never used
* Market availability: Hard to find
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Original
* Sheath: Included
* Manuals, Certificates and Warranty: Included
* Inspected and Certified by our in-house laboratory
There is a special charm in objects born where steel carries memory. The Kanetsune Shinobi KB-209 embodies the essential aesthetics of Japanese knife-making, recalling the heritage of traditional blades: a refined 15-layer Damascus blade with a Blue Steel (Aogami) core, a handle inspired by traditional Japanese sword mountings featuring samegawa (ray/shark skin) with black cord wrapping, and an elegant Japanese-style wooden sheath. This fixed blade knife offers strong visual impact and is designed for light outdoor use, distinctive EDC carry, or as a collectible piece, combining presence, control, and time-honored materials.
Intended use: Fixed blade knife for EDC, light outdoor activities, tactical use, and collecting.
Production type: High-quality semi-handcrafted production inspired by Japanese tradition.
Country of manufacture: Japan (Seki).
Blade: Blue Steel (Aogami) with 15-layer Damascus cladding.
Blade finish: Visible traditional Damascus pattern.
Handle: Oak wood handle wrapped in samegawa (ray/shark skin) with black cord.
Blade length: 135 mm.
Blade thickness: 4 mm.
Total length: 260 mm.
Weight: Approx. 162 g (knife only).
Packaging: Knife supplied with Japanese-style wooden sheath.
Notes: KB-209 model from the Shinobi series; often listed as discontinued or difficult to source by various retailers.
A brief history of the brand
Kanetsune is a brand of Kitasho Co., Ltd., based in Seki, a Japanese city historically known as the “City of Cutlery.” The company officially dates back to 1964, with family roots in knife manufacturing and trade going back to the 1930s. The name Kanetsune is traditionally associated with a renowned master bladesmith of the Muromachi period, underlining its strong connection to Japanese forging heritage.
Use and maintenance advice
The Blue Steel Damascus blade requires care: after use, it is recommended to wash by hand, dry immediately, and apply a light protective oil layer during storage or use in humid environments. Avoid dishwashers and prolonged contact with water or aggressive substances. The samegawa provides a natural, secure grip, enhancing handle stability even with wet hands.
Why choose this knife
The Kanetsune Shinobi KB-209 is not just a knife, but an object with a strong identity: 15-layer Damascus Blue Steel for a distinctive cutting edge, a traditional handle with samegawa and cord for control and authenticity, and a Japanese-style wooden sheath for elegant presentation. An ideal choice for enthusiasts seeking a fixed blade with true Japanese character, beyond common Western designs.KB209€0.00Only 0 leftOnly 0 left
Out of stock -
Andre De Villiers ADV - Pathfinder G2 Knife - Blackwashed Titanium - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Origin: Retired from a private collection, previously purchased and professionally resharpened
* Condition: Overall in excellent condition
* Available on the market: 2017 model - available in different configurations and steels
* Sharpening: Professionally resharpened
* Marks on blade: Minimal signs of resharpening
* Marks on handle: None
* Box: Pouch with zip
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratoryIntended use: collection/sport/military
Type of production: Midtech
Country of production: South Africa
Blade: CPM S35VN steel
Blade treatment: black
Handle: blackwashed titanium
Blade length: 95mm.
Blade thickness: 4.5mm.
Closed length: 130mm.
Total length: 226mm.
Closed thickness: 14mm.
Balance: 2cm behind the guard
Weight: 210g.
Opening: Flipper on bearings
Closure: Frame Lock
Clip: titanium, machined from solid
Packaging: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-PATG2B-CP€0.00Only 0 leftOnly 0 leftOut of stock -
Randall Knives - Model 18 - Attack Survival Knife 5.5" - PRIVATE COLLECTION - knife
KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: In excellent condition, never used, with some minor signs of wear
* Available on the market: Difficult to find
* Sharpness: Factory sharpness, could be improved
* Marks on blade: Some minor signs of wear
* Marks on handle: Some minor signs of wear
* Box: -
* Sheath: in excellent condition, complete
* Manuals, Certificates, and Warranties: -
Checked and Certified by our in-house laboratoryCreated for survival, it became a legend.
The Randall Model 18 is much more than a knife: it is a symbol of resistance, ingenuity, and determination. Created to accompany military pilots on the most extreme missions, it has won over generations of adventurers, explorers, and collectors around the world. With its tubular handle and unmistakable battle design, it embodies the essence of true survival—where only reliability, strength, and the ability to adapt to any situation matter.
Today, as then, it is the perfect ally for those who are not satisfied with just any knife. For those looking for a faithful companion, ready for anything. For those who love to own a piece of history, hand-forged in the United States, still according to tradition.
A timeless icon, built to last a lifetime. And beyond.
Intended use: All-round utility/survival
Type of production: Handcrafted
Country of production: Orlando, Florida, USA
Blade: 440B stainless steel at 57/59HRC
Blade finish: satin
Handle: tubular, stainless steel, with through guard and brass screw cap
Blade length: 142mm.
Blade thickness: 6mm.
Total length: 264mm.
Weight: 345g.
Sheath: brown oiled leather, with belt loop, front button pocket, and sharpening stone
Notes: previously purchased knife, withdrawn from private collection, in excellent conditionRMK18-55-CP€0.00Only 0 leftOnly 0 leftOut of stock -
EOS - Prawn Friction Folder - CPM-S35VN & Flamed Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Overall in good condition, shows some minor cosmetic marks on the heat treatment of the titanium handles, clip, and blade, which do not compromise its practical use in any way
* Available on the market: Out of production and no longer available on the market
* Sharpness: Factory sharp
* Marks on blade: Minor cosmetic marks due to carrying and use
* Marks on handle: Minor cosmetic marks due to wear and tear
* Box: Knife sold in a nylon bag with EOS logos and a titanium key to adjust the blade tension
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory
EOS Prawn – The first friction folder by EOS
The Prawn marks EOS's debut in the world of friction folders, offering a compact and robust solution for everyday use. Featuring a flamed titanium handle and CPM-S35VN sintered steel blade, it combines robustness and exclusive design.Although it does not have a blade lock, the adjustable washer system allows you to keep the blade in the open or closed position by adjusting the tension. Its compact size makes it ideal for carrying in your pocket, backpack, or tactical bag.
Intended use: Tactical/EDC/CollectionProduction type: Midtech
Country of manufacture: USA
Blade: CPM S35VN steel
Blade treatment: Stonewashed
Handle: Flamed titanium
Blade length: 68mm.
Blade thickness: 4mm.
Closed length: 83mm.
Total length: 135mm.
Closed thickness: 12mm.
Weight: 93g.
Closure: Friction Folder (without blade lock)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Notes: knife from a private collection, previously purchased and used, equipped with its original nylon pouch with which it was sold and a small titanium key to be used to adjust the tension and fluidity of the blade openingEOS-PT-CP€0.00Only 0 leftOnly 0 left
Out of stock -
Randall Knives - Model 25-5 - Trapper 5” brass, deer and leather - PRIVATE COLLECTION - knife
KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: -
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: -
Inspected and certified by our internal laboratoryDrop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Deer wood and leather rings, and oiled leather sheath.
Intended use: hunting / light utility
Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: deer horn and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 275g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like newAP-RK-25-5CE-CP€0.00Only 0 leftOnly 0 leftOut of stock -
Randall Knives - Model 25-5 - Trapper 5” in Brass, Desert Ironwood and Leather - PRIVATE COLLECTION - knife
KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: Nylon pouch with zipper, with Randall Knives logos
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: Original warranty sheet
Inspected and certified by our internal laboratoryDrop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Desert Ironwood and leather, and oiled leather sheath.
Intended use: hunting / light utility
Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: Desert Ironwood and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 270g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like new - provided with Randall Knives zippered nylon pouch and paper warrantyAP-RK-25-5DI-CP€0.00Only 0 leftOnly 0 leftOut of stock -
Randall Knives - Model 26 Pathfinder Knife - Stag - PRIVATE COLLECTION - knife
The Model 26 Pathfinder is an excellent lightweight skinning and outdoor knife. The blade design favours both cutting and pointing work. This knife has become one of the most popular small hunting knives.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Good overall condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: Slight on the guard, the deer part is parts as new
* Packaging: -
* Scabbard: Original, leather, in good condition, some marks on the front
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratoryIntended use: utility
Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Deerskin
Blade length: 100mm.
Blade thickness: 4mm.
Total length: 215mm.
Balance: set back about 2cm from the guard
Weight: 124g. (206g. scabbard included)
Sheath: brown leather with belt loop
Notes: -AP-RAND-26€0.00Only 0 leftOnly 0 leftOut of stock -
Randall Knives - Model 16 Diver Knife - Micarta - PRIVATE COLLECTION - knife
The Model 16 was designed to meet the demand for an almost indestructible multi-purpose knife, including intensive use in salt water (careful cleaning and maintenance is however recommended). A special wax-impregnated sheath is included.
7″ (17.8cm) stainless steel blade with 6.5mm thickness. The top of the blade is slightly serrated to allow easy thumb placement. Black Micarta handle. Extra-heavy 7/8″ (2.2cm) wide tang that extends through a channel in the handle, securely fixed with epoxy.
KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased, manufactured in 2023
* Condition: Very good condition, like new
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in very good condition
* Manuals, Certificates and Warranties: - - * Checked and Certified by our in-house laboratory.
* Checked and certified by our in-house laboratoryIntended use: utility
Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Micarta
Blade length: 178mm.
Blade thickness: 6.5mm.
Total length: 297mm.
Balance: on the guard
Weight: 362g. (522g. including scabbard)
Sheath: Brown leather with belt loop
Notes: -AP-RAND-16€0.00Only 0 leftOnly 0 leftOut of stock -
Randall Knives - Model 7 - Fisherman Hunter Deer - PRIVATE COLLECTION - knife
This is a smaller version of Bo Randall's original knife, made in the Scagel knife style. 12.2 cm blade made of 4.5 mm thick stainless steel. This size and shape are popular with outdoor activity experts worldwide. It has a nickel silver guard and back cap and a handle made of authentic Indian deer antler. It weighs about 168 grams and comes with a brown leather sheath.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended use: hunting/fishingType of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: deerskin with through-guard and nickel silver tang
Blade length: 122mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Balance: backward
Weight: 168g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collectionAP-RK-7FHC€0.00Only 0 leftOnly 0 leftOut of stock -
Randall Knives - Model 27 - Trailblazer Leather and Walnut - PRIVATE COLLECTION - knife
The Model 27 is an ideal all-purpose sports knife. This knife has a stainless steel blade, 5mm blade thickness and 147mm length with concealed tang construction. The handle has nickel silver guard and pommel and a leather and walnut wood ring handle with black micarta and nickel silver spacers.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratoryIntended use: hunting
Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: made of leather and walnut wood rings with through-guard and nickel silver tang
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 262mm.
Balance: backward
Weight: 230g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collectionAP-RK-27€0.00Only 0 leftOnly 0 leftOut of stock -
Randall Knives - Model 11-4.5 - Alaskan Hunter brass and walnut - PRIVATE COLLECTION - knife
Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended use: huntingType of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: ergonomic, walnut wood with through-guard and brass tang
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 245mm.
Balance: backward
Weight: 290g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collectionAP-RK-1145€0.00Only 0 leftOnly 0 leftOut of stock -
Randall Knives - Model 11-5 - Alaskan Skinner - PRIVATE COLLECTION - knife
Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: A few small marks given by being placed in the sheath.
* Marks on handle: A few small marks on the duralumin pommel.
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended use: huntingType of production: handcrafted
Country of manufacture: USA
Blade: carbon steel O-1
Blade finish: satin finish
Handle: leather rings with brass through-guard and duralumin tang
Blade length: 118mm.
Blade thickness: 4.5mm.
Total length: 230mm.
Balance: backward
Weight: 210g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collectionAP-RK-115L€0.00Only 0 leftOnly 0 leftOut of stock -
Randall Knives - Model 19-4 - Bushmate Stag Horn - PRIVATE COLLECTION - knife
This Model 19-4 Bushmaster from Randall Made Knives features a clip point blade with satin finish, false counterbore and serrated thumb rest. The handle consists of nickel silver through-guard and recoil pad with colored micarta spacers and monolithic curved deer antler grip. Includes original "Model A" leather sheath with belt loop and sharpening stone.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryIntended use: hunting
Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: deer antler with through-guard and nickel silver recoil pad
Blade length: 115mm.
Blade thickness: 5.5mm.
Total length: 228mm.
Balance: set back
Weight: 281g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collectionAP-RK-194SH€0.00Only 0 leftOnly 0 leftOut of stock -
Randall Knives - Modelo 1-7" - Micarta Finger Grooves - COLECCION PRIVADA - cuchillo de coleccionista
CUCHILLO DE COLECCIÓN PRIVADA
* Tipo: Comprado Anteriormente
* Condición: Muy buen estado
* Afilado: Original
* Marcas en la hoja: Ninguna
* Marcas en el mango: Ninguna
* Embalaje: -
* Vaina: original, cuero, en muy buen estado
* Manuales, Certificados y Garantías: - - * Comprobado y certificado por nuestro laboratorio interno.
* Comprobado y certificado por nuestro laboratorio internoEl Randall Model 1 Fighter fue uno de los primeros modelos producidos en el taller de Randall en Orlando. Un Modelo 1, fabricado por el propio Bo Randall, sirvió como prototipo para la Springfield Randall que fue producida por la Northampton Cutlery Company cerca de Springfield, Massachusetts, en 1943 y 1944 para uso del ejército estadounidense.
Uso previsto: táctico / militar
Tipo de fabricación: artesanal
País de fabricación: USA
Hoja: espiga completa en acero inoxidable 440B
Acabado de la hoja: satinado
Empuñadura: protector pasante de latón y empuñadura monolítica de micarta
Longitud de la hoja: 177 mm.
Grosor de la hoja: 5mm.
Longitud total: 295mm.
Equilibrio: en la rama de la guarda
Peso: 350g.
Funda: cinturón, cuero negro
Notas: Cuchillo comprado anteriormente, retirado de colección privadaAP-RK-1-7MFG€0.00Only 0 leftOnly 0 leftOut of stock -
Andre De Villiers ADV - 2018 Ronin - S35VN & Integral Blackwashed Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like New
* Commercially available 2018 Exemplar; currently offering other variants in other configurations.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended use: collectible/sporting/military
Production type: Midtech
Country of manufacture: South Africa
Blade: stainless steel CPM-S35VN
Blade treatment: blackwash
Handle: integral, machined titanium from solid, blackwash finish
Blade length: 103mm.
Blade thickness: 4.5mm.
Length closed: 132mm.
Total length: 234mm.
Thickness when closed: 16mm.
Weight: 191g.
Opening: Carson Flipper type, on ball bearings
Closure: FrameLock
Clip: titanium, machined from billet
Packaging: plastic case with ADV Tactical logos
Notes: entirely designed and built by Andre De Villiers in his own workshopADV-RBTI-CP€0.00Only 0 leftOnly 0 leftOut of stock
Sports, Outdoor, Tactical, and Collectible Knives: The Collini Selection
For over 50 years, Coltelleria Collini has been a reference point in Italy for the world of specialized cutlery. Since 1968, we have been selecting sports, outdoor, professional, and collectible knives, collaborating exclusively with official brands, historical manufacturers, and master artisans.
In this category, you will find thousands of original knives, chosen for demanding collectors, EDC, outdoor, and bushcraft enthusiasts, as well as professional operators who require reliability, quality materials, and consistent performance over time.
Military & Tactical Knives
Knives designed for heavy-duty and professional use, where robustness and reliability are paramount. We select world-leading brands such as Extrema Ratio, Zero Tolerance, Ka-Bar, and Cold Steel. Fixed and folding blades developed to withstand extreme conditions.
Sports & Outdoor Knives
From trekking to hiking, from bushcraft to everyday carry (EDC). Discover the Italian excellence of Fox Knives and LionSteel, the Nordic solidity of Fallkniven, and great classics like Opinel and Spyderco.
Collectible & Rare Knives
Custom, vintage, limited edition, and discontinued knives. Through our Approved program, we acquire, evaluate, and certify private collections, offering our customers access to rare, display, and investment-grade blades.
Why choose Coltelleria Collini since 1968
We are not just an e-commerce site, but a historic cutlery shop with direct experience on the products we offer. Buying from us guarantees:
- Certified Originality: we are official dealers for all brands we carry.
- Real Stock with fast shipping.
- Qualified Assistance and technical advice before and after sales.
Knives FAQ
There is no absolute "best" brand, but specific leaders for each use. For tactical and professional use, Extrema Ratio and Zero Tolerance are top tier. For outdoor and EDC, Fox, LionSteel, Fallkniven, and Spyderco excel.
Yes, buying sports and collectible knives online is generally legal for adults. However, laws regarding carrying and transporting knives in public vary significantly by country. Always check your local regulations.