Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: still in production.
* Sharpening: Professionally re-sharpened.
* Marks on blade: None
* Marks on handle: a few small marks on clip, hardware, and aluminum spacer
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: Tactical

Production type: Industrial
Country of Production: Italy
Blade: N690Co 58HRC steel with Grade 5 titanium back (49-50HRC)
Blade finish: stonewashed
Handle: G10
Blade length: 91mm.
Blade thickness: 5mm.
Length closed 127mm.
Total length: 216mm.
Thickness when closed: 25mm.
Balance: Backward, 3cm from the top of the guard.
Weight: 186g.
Latch: Liner Lock, with manual insertion safety
Clip: Stainless steel, reversible
Notes: previously purchased knife, withdrawn from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Never used, but with three marks on titanium anodization.
* Commercially available: In production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: 3 scratches on blue anodizing.
* Box: Present
* Scabbard: Pouch with zipper.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: M390 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Blue Anodized Titanium with AISI 303 stainless steel hardware
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm.
Weight: 95g.
Closure: FrameLock
Clip: flush, AISI 302 stainless steel, removable and reversible
Sheath: zippered pouch, leatherette
Packaging: cardboard box with Fox Knives logos 
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening system

Vintage Fox collector's knife from Maniago - Limited Edition 1997

We present a one-of-a-kind example, the vintage Fox knife from Maniago, produced in 1997 and part of a limited series of only 1000 pieces. This specific knife, numbered 94, comes from a private collection and has been kept in perfect condition, retaining its original beauty and functionality intact.

Production and Origin: Made in Maniago, Italy, in 1997, part of a numbered and limited series (94/1000).
Materials: The blade is made of Damascus steel, composed of 512 hand-forged layers. The handle is made of cocobolo wood, known for its aesthetic and robust qualities.
Packaging and Authenticity: The knife is presented in a wooden box, ideal for storage or display, and accompanied by a certificate of authenticity signed by Fox's founder, Oreste Frati, which guarantees its originality and quality.
Condition: Retired from a private collection, the knife has been maintained in impeccable condition, a testament to the care and attention of its previous owners.

Intended use: Collection

Blade: 512 layer damascus stainless steel
Blade production in Italy
Handle: in cocobolo pledge
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 145mm.
Total length: 12mm.
Balancing: -
Weight: 222g.
Closure: Back Lock
Clips: -
Sheath: -
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: good condition
* Commercially available: discontinued
* Sharpening: factory sharpened
* Marks on blade: signs of wear on blade.
* Marks on handle: none
* Box: lacking original packaging, sold with scabbard only
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory Coltelleria Collini

Intended Use: Tactical / Hiking

Type of production: industrial
Blade: stainless steel N690Co 58/60HRC
Country of production: Italy
Handle: forprene, removable
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 357mm.
Balance: forward, 45mm from the lower guard branch
Weight: 380g.
Sheath: made of 1000D OD Green cordura, MOLLE compatible
Notes: Foxionic surface treatment at 72/75HRC

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: in good condition, with a few small marks that do not affect its use.
* Commercially available: discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Some non-removable adhesive residue.
* Marks on handle: Small signs of wear on the clip's paintwork.
* Box: Absent
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Emergency / Rescue / Multipurpose Tactical

Country of Production: Italy
Blade: N690Co stainless steel with DLC treatment
Handle: G10
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 150mm.
Total length: 240mm.
Weight: 178g.
Closure: Liner Lock
Clip: teflonized steel black reversible
Sheath: cordura, belt-mounted
Notes: emergency rear belt cutter, glass breaker on tang

Knife Withdrawn from Private Collection
Type: Previously Purchased
Condition: Excellent
Available in the market: No
Sharpening: Original
Marks on the blade: No
Marks on the handle: No
Packaging: Yes
Sheath: In Kydex
Manuals, Certificates, and Warranties: Yes
Checked and Certified by our internal laboratory
Intended Use: Tactical/CQC

Type of Production: Industrial
Blade Production: Italy
Blade: Full tang in N690Co steel 58/60HRC
Blade Treatment: Teflon Coating
Handle: G-10
Blade Length: 75mm.
Blade Thickness: 4mm.
Closed Length: -
Total Length: 195mm.
Thickness when closed: -
Balance: Backward, at 3cm.
Weight: 170g.
Lock: -
Clip: on the sheath
Sheath: in Kydex
Packaging: Gray cardboard box with Fox logos
Notes: -

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory

Intended use: Tactical / Collection

Type of production: Industrial
Blade production: Italy
Blade: N690Co 58HRC stainless steel
Blade Treatment: DLC
Handle: G-10 and titanium
Blade length: 95mm. partially serrated edge
Blade thickness: 4mm.
Closed length: 130mm.
Total length: 225mm.
Thickness when closed without clip: 10mm.
Balancing: -
Weight: 152g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -