Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Never used, complete with all accessories, knife like new, a few small scratches on the leather sheath
* Available on the market: Available
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present and complete
* Sheath: Present, with a few small scratches
* Manuals, certificates, and warranties: Present
* Checked and certified by our in-house laboratory

Intended use: Utility/Outdoor

Type of production: Industrial
Country of production: Italy
Blade: Niolox 59/61HRC stainless steel with Black Idroglider finish
Handle: Bison Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: advanced to 1cm
Weight: 235g.
Sheath: leather
Packaging: cardboard box with Fox logos
Notes: previously purchased knife from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows some barely noticeable signs of aging on the Zytel handle and a couple of small spots of oxidation on the tip of the blade (right side), which in no way compromise its practical use
* Commercially available: Discontinued
* Sharpness: Factory-sharpened; could be improved
* Marks on blade: A couple of small spots of oxidation on the tip of the blade, on the right side, which in no way compromise its practical use
* Marks on handle: A few barely noticeable signs of aging
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

Intended use: sports / collectible

Production type: Industrial
Country of manufacture: Japan
Blade: VG-10 stainless steel
Blade finish: Satin
Handle: Zytel, with stainless steel liners
Blade length: 90 mm.
Blade thickness: 4 mm.
Closed length: 120 mm.
Overall length: 210 mm.
Thickness when closed: 20 mm.
Weight: 135 g.
Closure: Arc-Lock (crossbar lock)
Clip: removable, stainless steel
Packaging: -
Notes: Previously purchased knife, from a private collection

PREVIOUSLY PURCHASED AND USED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased and used
* Condition: Good overall condition, with evident signs of age and use
* Commercial availability: Discontinued
* Sharpening: Resharpened
* Marks on blade: Present, with scratches, abrasions and surface dulling consistent with age and use
* Marks on handle: Present, with natural patina and signs of use on the stacked leather washers
* Box: -
* Sheath: Present, original leather sheath, heavily used and showing signs of age
* Manuals, Certificates and Warranties: -
* Inspected and Certified by our in-house laboratory

The SOG S1 Bowie Vietnam 5th Special Forces Group is one of the most representative knives in the history of SOG Specialty Knives and the model with which the American brand began its production during the second half of the 1980s. Made in Seki, Japan, the S1 was created as a tribute to the famous knives used by members of the Military Assistance Command, Vietnam – Studies and Observations Group (MACV-SOG) during the Vietnam War.

It is important to distinguish the S1 from the original “sterile” military knives actually used operationally during the conflict: the commercial SOG model instead reproduces the commemorative configuration of the famous MACV-SOG Bowie, featuring the U.S. Army Special Forces crest on the blade together with the marking “VIETNAM 5th SPECIAL FORCES GROUP”. This strong historical identity, combined with the quality of Japanese manufacturing, has made it one of the most recognizable and sought-after vintage SOG knives among collectors.

Production was entrusted to Ichiro Hattori in Seki, one of the most important names in Japanese knifemaking. The substantial Bowie blade is made from SK-5 carbon steel, hardened to approximately 57-58 HRC, with the characteristic dark gun-blue finish combined with polished surfaces. The handle uses traditional stacked leather washers stabilized with epoxy resin, completed by a sturdy metal guard and pommel.

This example features the classic SOG Specialty Knives logo on one side of the ricasso and, on the opposite side, the markings “SEKI-JAPAN”, the Special Forces crest and the inscription “VIETNAM 5th SPECIAL FORCES GROUP”. It is also accompanied by its original black leather sheath, complete with sharpening stone pocket and a large Special Forces crest embossed on the lower section. The original period identification label is still present on the back of the sheath.

The example offered here comes from a private collection and has actually been used. The blade shows scratches, abrasions and surface marks, both on the blued and polished areas; the leather handle has developed a noticeable patina and shows wear consistent with its age. The original sheath is also heavily used, with leather wear, marks and widespread abrasions. Its condition should therefore be considered good in relation to its age and nature, but it should not be compared with a display-grade or NOS example.

These very characteristics tell the story of an authentic SOG S1 made in Seki: a knife that, regardless of its cosmetic condition, retains all the appeal of one of the founding models of the brand and today represents a particularly significant piece for a collection dedicated to American military knives and Japanese SOG production from the 1980s and 1990s.

Intended use: Military / Collection
Production type: Industrial
Model: S1 Bowie - Vietnam 5th Special Forces Group
Country of manufacture: Seki - Japan
Model production period: 1986 - 2005
Blade: SK-5 carbon steel
Hardness: 57-58 HRC
Blade finish: Gun-blue / polished
Blade profile: Bowie
Edge: Plain
Handle: Stacked leather washers stabilized with epoxy resin
Guard and pommel: Metal
Blade length: Approx. 159mm
Blade thickness: Approx. 7.1mm
Overall length: Approx. 273mm
Weight: Approx. 349g
Sheath: Original black leather sheath with sharpening stone pocket and Special Forces crest
Notes: Previously purchased and used knife, from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Like new
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, could be improved
* Marks on blade: None
* Marks on handle: None
* Box: Included
* Sheath: Included
* Manuals, Certificates, and Warranties: Included
* Inspected and Certified by our in-house laboratory

The SOG Forge FG01-L is a knife of extraordinary beauty and build quality, combining Japanese craftsmanship with modern production techniques.

The blade, forged using a hammering technique, features a unique texture that is one-of-a-kind for each piece. It is made of San Mai steel, with a VG-10 cutting edge and 420J2 outer layers, a combination that ensures an excellent balance between sharpness, edge retention, and durability.

The glass-reinforced nylon (GRN) handle is designed with perfectly contoured inserts to provide optimal balance and a secure, comfortable grip. The knife is complemented by an elegant premium leather sheath, enhanced with a colored fabric insert and a button closure.

Manufactured in Japan, the SOG Forge FG01-L evokes an era when honor and master craftsmanship were fundamental values. An object that is not merely a tool, but a true collector’s item destined to stand the test of time and be passed down from generation to generation.

Intended Use: Collectible / Sport

Production Type: Industrial
Country of Origin: Seki - Japan
Blade: SanMai laminated stainless steel with a VG-10 cutting edge and 420J2 outer layers, featuring a concave grind
Blade Finish: Hammered and Brut de Forge with a satin-finished portion of the cutting edge
Handle: Three-dimensionally shaped GRN (Glass Reinforced Nylon)
Blade Length: 160mm.
Blade thickness: 5 mm.
Overall length: 275 mm.
Weight: 290 g.
Sheath: Leather, with an insert of fine Japanese fabric, which varies from sheath to sheath
Packaging: Cardboard box with SOG logos
Notes: Knife from a private collection, previously purchased

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, NOS (new old stock), never used or removed from its original box
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present and perfect
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

Created in 1986 as the second official model of the newly formed SOG Specialty Knives, the S2 Trident is not just a knife, but a bridge between the past and the present. Designed in honor of the Navy SEALs and special units that operated in Vietnam, it draws direct inspiration from the legendary MACV-SOG knives of the 1960s, “sterilized” and lethal tools used in the most secret missions of the conflict.

Produced during the company's golden age in Seki, Japan, the Trident combines elegant lines and combat functionality: a thick, balanced AUS-8 steel Bowie blade with impeccable satin finish; ergonomic and durable black micarta stacked washer handle; and the engraved Navy SEAL symbol, a seal of belonging to an elite group. The leather sheath with sharpening stone completes a package designed for operators and collectors.

The S2 Trident is the most refined tribute to SOG's operational past: a homage to the military tradition of Vietnam reinterpreted with Japanese craftsmanship. Today, with a very high rarity index, it is considered one of the most sought-after pieces by military knife collectors, not only for its build quality, but for the history embodied in its blade.

Intended use: Military / Collection

Type of production: industrial
Country of production: Seki - Japan
Blade: AUS-8 stainless steel
Blade finish: Satin
Handle: Stacked micarta rings
Blade length: 160mm.
Blade thickness: 6 mm.
Total length: 278 mm.
Balance: rearward, 1 cm from the guard
Weight: 312 g.
Sheath: leather with pocket for sharpening stone (included)
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A few small marks from time.
* Marks on handle: None
* Box: Espotive box present, with a few small marks due to time
* Scabbard: Present
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

2014 knife created through a collaboration between Fox and Hill Knives that commemorates the ISAF (International Security Forces) and ANSF (Afghan National Security Forces) memorial unveiled Sept. 22, 2013, in Kabul, Afghanistan, to honor fallen military personnel during peacekeeping operations in the country. The monument, with inscriptions in English, Pashtu and Dari, is a tribute to the different nationalities involved in the missions. The unveiling ceremony was attended by dignitaries from the Afghan government, security forces and ISAF, underscoring the value of remembrance and the sacrifices made.

Intended Use: Tactical/Collection

Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: hard ceramic coated
Handle: G10
Blade length: 150mm.
Blade thickness: 6.3mm.
Total length: 279mm.
Weight: 220g.
Sheath: made of Kydex, with MOLLE clip
Packaging: Cardboard box / display box with ISAF and Fox Knives symbols and logos
Notes: Designed by Hill Knives - previously purchased knife from a private collection

KNIFE RETRIEVED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private owner, previously purchased
* Condition: Overall in excellent condition, sheath lanyard slightly worn (detailed photo available)
* Availability: Discontinued, limited edition of 15 pieces
* Factory Edge: Yes
* Blade Marks: None
* Handle Marks: None
* Box: Not included
* Sheath: Included
* Manuals, Certificates & Warranty: Not included
* Inspected and Certified by our internal laboratory

Japanese steel meets Italian excellence

For this 2021 collaboration between Coltelleria Collini of Busto Arsizio and Fox Knives of Maniago, we decided to offer the 609OD Bushman, an outstanding bushcraft knife produced by Fox Knives of Maniago, using high-performance Japanese V-Toku2 Sanmai steel (5mm) from Takefu Steel instead of the D2 steel used in the standard model.

Specifically, we used high-carbon V-Toku2 at 62/63HRC for the central core and stainless SUS410 for the outer layers, ensuring exceptional cutting ability, penetration, and edge retention. At the same time, the blade offers high corrosion resistance and increased toughness due to the laminated structure and external stainless steel.

Technical Specifications

Like the ancient swords of the Japanese Samurai.

The laminated steel—imported into Italy by Collini Steel directly from Takefu Steel in Japan—follows the ancient Japanese tradition of crafting legendary Samurai swords. As early as the 1100s, Japanese blacksmiths combined different materials to create Katana swords with incredible cutting power, strength, and flexibility, unmatched at the time. This revolutionary forging technique has allowed Samurai swords to survive to this day as some of the most fascinating objects ever created.

By applying this tradition to modern metallurgy, we now have technologically advanced steels that have been tested and widely used in knife-making by renowned brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, and more.

San Mai Steel Features: This consists of different types of metals fused together to create a composite steel that enhances and intensifies the individual strengths of each material:

• Longer-lasting cutting edge: High-performance, high-carbon core steels (VG10, CoS, Shiro) or sintered steels (SPG2) provide exceptional hardness and cutting performance after heat treatment.
• Increased toughness: Inspired by Japanese sword-making, the multi-layered steel is highly resistant to breakage due to the toughness of the core steel and the flexibility of the outer stainless steel layers.
• Improved corrosion resistance: The outer stainless steel layers provide high corrosion resistance. The galvanic combination of Takefu Steel’s materials further enhances resistance along the edge.
• Ease of reworking after heat treatment: Unlike standard steels, the outer layers retain some softness even after hardening, allowing for easier processing, drilling, and welding.
• Enhanced aesthetics: Multi-layered or Damascus-patterned knives are visually striking, elegant, and highly sought after by collectors worldwide.

For more information: Collini Steel

KNIFE RETIRED FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private owner, previously purchased and no longer in production
• Condition: Overall in excellent condition
• Commercial Availability: NOT commercially available
• Edge: Original
• Blade marks: None
• Handle marks: None
• Box: -
• Sheath: -
• Manuals, Certificates, and Warranties: -
• Inspected and Certified: by our internal laboratory

The SOG Mini-Vulcan VL-02 is a high-quality folding knife designed to meet the needs of knife enthusiasts and demanding users. Engineered to combine durability, functionality, and refined design, this model is the perfect blend of advanced engineering and precision craftsmanship.

The VG-10 steel blade, extremely sharp and corrosion-resistant, ensures flawless performance both in outdoor settings and daily tasks. The patented Arc-Lock opening mechanism from SOG offers secure and smooth closure while ensuring speed and ease of use.

Compact and lightweight, the Mini-Vulcan is perfect for those seeking a versatile, reliable, and easy-to-carry knife. Whether you’re a collector, hiker, or professional, this knife will be an essential companion, ready to tackle the challenges of any day.

Intended Use: Sporting

Production Type: Industrial
Blade Production: Japan
Blade: VG-10 stainless steel
Blade Treatment: -
Handle: Zytel and steel liners
Blade Length: 78mm
Blade Thickness: 3mm
Closed Length: 109mm
Overall Length: 187mm
Closed Thickness: 20.3mm
Balance: -
Weight: 104g
Locking Mechanism: Arc Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: -
Notes: -

The SOG Winder II Heavy Duty Folding Knife (model SOG00009) exemplifies high quality and precision in knife making. With a blade length of 8.8 cm and a thickness of 4.7 mm, it is perfect for all kinds of tasks, providing excellent performance in cutting, slicing and piercing. The black textured Kraton handle provides an excellent grip, while the sturdy Lockback mechanism ensures safety during use.

The knife has an ambidextrous design, making it easy for both left- and right-handed people to use, and its compactness (11.4 cm when closed) makes it convenient to carry in a pocket or backpack. Made in Seki, Japan, a city with a long tradition of knife making, the Winder II is synonymous with high quality and craftsmanship.

Purchased in 1994 from the well-known Hoffritz cutlery chain in New York and now discontinued, it is a collector's item of great historical value. This knife, from a private collection, shows no signs of use, and is a prized piece for enthusiasts and collectors.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: In very good condition, with normal signs due to time
* Commercially available: 1994 knife - Discontinued model
* Sharpening: Factory.
* Marks on blade: Normal marks given by the opening and closing of the blade.
* Marks on handle: No.
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Collection

Production Type: Industrial
Country of Production: Japan
Blade: stainless steel AUS-8
Blade finish: satin finish
Handle: stainless steel and kraton
Blade length: 88mm.
Blade thickness: 4.7mm.
Length closed: 114mm.
Total length: 205mm.
Weight: 220g.
Closure: back-Lock
Notes: previously purchased 1994 knife, discontinued, in excellent condition

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available
* Sharpness: Factory, never resharpened
* Marks on blade: none
* Marks on handle: None
* Box: NOT present
* Sheath: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our internal laboratory

Intended use: Combat / All Round Utility

Blade: N690Co 59/60HRC stainless steel
Treatment: Coyote Tan Idroglider
Handle: Kraton
Blade length: 185mm.
Blade thickness: 5mm.
Closed length: -
Total length: 315mm.
Balancing: On the guard branch
Weight: 285g.
Closure: -
Clips: -
Sheath: Modular in fiberglass, Nylon and Cordura with stainless steel cable cutter
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: Japan
Blade: VG10 stainless steel
Blade Finish: Black TiNi
Handle: Zytel with steel liners
Blade Length: 78mm.
Blade thickness: 3mm.
Length closed 109mm.
Total length: 187mm.
Thickness when closed: 20.3mm.
Weight: 104g.
Closure: Arc Lock
Clip: removable, stainless steel
Scabbard: -
Packaging: cardboard box with SOG logos
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private, previously purchased.
* Condition: Overall in good condition.
* Commercially available: Knife originally produced in 2014, currently discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: A few small marks given by time.
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel 154CM
Blade finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 88mm.
Blade thickness: 3.2mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 80g.
Closure: Back Lock
Clip: Removable and reversible, stainless steel
Notes: design by Mike Vellenkamp

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private, previously purchased.
* Condition: Overall in good condition.
* Commercially available: Knife originally produced in 2014, currently discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: A few small marks given by time.
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel 154CM
Blade finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 88mm.
Blade thickness: 3.2mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 80g.
Closure: Back Lock
Clip: Removable and reversible, stainless steel
Notes: design by Mike Vellenkamp

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in good condition
* Commercially available: in production
* Sharpness: Original sharpness
* Marks on blade: signs of use
* Marks on handle: None
* Box: Original
* Sheath: /
* Checked and certified by our internal laboratory

Intended use: Survival/Utlity

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade Treatment: Black Hidroglider
Handle: Forprene
Blade length: 175mm.
Blade thickness: 6mm.
Total length: 300mm.
Balancing: Advanced to 3cm. from the guard branch
Weight: 340g.
Sheath: in Nylon, M.O.L.L.E compatible.
Packaging: cardboard box with Fox logos
Notes: Survival kit included with M.O.L.L.E. type attachments.

The survival kit contains:
* water container
* nylon strap
* mini compass
* candle
* Flint
* wire saw
* fishing kit
* multi-tools
* matches
* needle and thread kit
* razor blade
* emergency whistle
* copper wire
* SOS mirror
* pencil
* fluorescent light stick

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: still in production.
* Sharpening: Professionally re-sharpened.
* Marks on blade: None
* Marks on handle: a few small marks on clip, hardware, and aluminum spacer
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: Tactical

Production type: Industrial
Country of Production: Italy
Blade: N690Co 58HRC steel with Grade 5 titanium back (49-50HRC)
Blade finish: stonewashed
Handle: G10
Blade length: 91mm.
Blade thickness: 5mm.
Length closed 127mm.
Total length: 216mm.
Thickness when closed: 25mm.
Balance: Backward, 3cm from the top of the guard.
Weight: 186g.
Latch: Liner Lock, with manual insertion safety
Clip: Stainless steel, reversible
Notes: previously purchased knife, withdrawn from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Never used, but with three marks on titanium anodization.
* Commercially available: In production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: 3 scratches on blue anodizing.
* Box: Present
* Scabbard: Pouch with zipper.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: M390 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Blue Anodized Titanium with AISI 303 stainless steel hardware
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm.
Weight: 95g.
Closure: FrameLock
Clip: flush, AISI 302 stainless steel, removable and reversible
Sheath: zippered pouch, leatherette
Packaging: cardboard box with Fox Knives logos 
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening system

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: Yes
* Sharpening: Resharpened by our workshop
* Marks on blade: No
* Marks on handle: No
* Box: NOT present
* Sheath: Cordura, perfect
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory

Intended use: Tactical/Sports

Type of production: Industrial
Blade production: Italy
Blade: N690Co stainless steel
Blade treatment: PVD
Handle: G10
Blade length: 140mm.
Blade thickness: 5mm.
Closed length: 175mm.
Total length: 310mm.
Thickness when closed: -
Balancing: -
Weight: 446g.
Closure: Backlock with safety system
Clips: -
Sheath: in cordura with spring attachments
Packaging: Cardboard box with Fox logos
Note: The Meskwaki Native American tribe also known as the fox tribe

Vintage Fox collector's knife from Maniago - Limited Edition 1997

We present a one-of-a-kind example, the vintage Fox knife from Maniago, produced in 1997 and part of a limited series of only 1000 pieces. This specific knife, numbered 94, comes from a private collection and has been kept in perfect condition, retaining its original beauty and functionality intact.

Production and Origin: Made in Maniago, Italy, in 1997, part of a numbered and limited series (94/1000).
Materials: The blade is made of Damascus steel, composed of 512 hand-forged layers. The handle is made of cocobolo wood, known for its aesthetic and robust qualities.
Packaging and Authenticity: The knife is presented in a wooden box, ideal for storage or display, and accompanied by a certificate of authenticity signed by Fox's founder, Oreste Frati, which guarantees its originality and quality.
Condition: Retired from a private collection, the knife has been maintained in impeccable condition, a testament to the care and attention of its previous owners.

Intended use: Collection

Blade: 512 layer damascus stainless steel
Blade production in Italy
Handle: in cocobolo pledge
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 145mm.
Total length: 12mm.
Balancing: -
Weight: 222g.
Closure: Back Lock
Clips: -
Sheath: -
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Condition: Used, but in good condition, with some minor signs of wear and tear.
* Commercially available: Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: a few small signs of wear and tear. 
* Marks on handle: a few small signs of wear and tear.
* Packaging: / 
* Scabbard: /
* Manuals, Certificates and Warranties: / /
* Checked and Certified by our in-house laboratory.

Profiles is the name of this tactical model designed by Mike Vellekamp. The main features that distinguish it are definitely the shape of the blade and the perfect handle grip.

Intended Use: Tactical/CQC

Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58-60HRC steel
Blade Finish: Burnished
Handle: G10
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 225mm.
Weight: 132g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Notes: previously purchased knife, withdrawn from a private collection

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in excellent condition
* Available on the market: in 2022 still in production
* Sharpening: our internal laboratory Coltelleria Collini
* Marks on the blade: some marks on the blade
* Marks on the handle: No
* Box: Yes, original, in perfect condition
* Sheath: yes, original, in perfect condition
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory

Intended use: Tactical / Sports
Type of production: Industrial
Production Lama: Italy
Blade: N690Co stainless steel
Blade treatment: PVD
Handle: G-10 Black
Blade length: 105mm.
Blade thickness: 4mm.
Closed length: 150mm.
Total length: 260mm.
Thick when closed: - 21mm.
Balancing: -
Weight: 326g.
Closure: Back Lock
Clip: Removable and reversible, in stainless steel
Sheath: in cordura
Packaging: Cardboard box with Fox FKMD logos

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Typology: withdrawn by private individual
* Condition: in excellent condition
* Available on the market: discontinued since 2015
* Sharpening: factory sharpening
* Marks on the blade: small marks on the tip caused by the extraction from the sheath
* Marks on the handle: no marks
* Box: original Fox box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

ST3-F is a knife studied and designed by the head instructor Paolo Bozzo of TEAM SURVIVAL (survival and survival school).
This project was developed through years of direct experience in the field.

Intended use: Survival / Utlity

Type of production: Industrial
Production Lama: Italy
Blade: N690Co stainless steel
Blade treatment: Black Teflon
Handle: Green Canvas Micarta
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 360mm.
Balance: Advanced to 2.5cm. from the guard branch
Weight: 552g.
Sheath: in cordura with molle attachments
Packaging: cardboard box with Fox logos
Notes: designed by Paolo Bozzo

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Typology: withdrawn by private individual
* Condition: in like new condition
* Commercially available: discontinued from 2021
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: without box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Tactical

Type of production: Industrial
Production Lama: Italy
Blade: N690Co stainless steel
Blade Treatment: Titanium Nitriding
Handle: Forprene
Blade length: 135mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 275mm.
Thick when closed: -
Balancing: -
Weight: 280g.
Closure: -
Clip: -
Sheath: Kydex and Cordura
Packaging: -
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased and used.
* Condition: In acceptable condition, shows several signs of wear and oxidation to the blade coating.
* Commercially available: Professionally resharpened.
* Marks on blade: several signs of use and oxidation marks that do not impair its functionality or undermine its sturdiness in use
* Marks on handle: normal signs of use.
* Box: absent
* Scabbard: Present, in good condition.
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / Utility

Type of production: industrial
Blade: stainless steel N690Co 58/60HRC
Country of manufacture: Italy
Handle: forprene, removable
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 357mm.
Balance: forward, 45mm from the lower guard branch
Weight: 380g.
Sheath: made of 1000D OD Green cordura, MOLLE compatible
Notes: Foxionic surface treatment at 72/75HRC

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: In like new condition
* Commercially available: No
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Yes original
* Manuals, Certificates and Guarantees: Yes
* Checked and Certified by our internal laboratory

Intended use: Sports
Type of production: Industrial
Blade production: Japan
Blade: laminated stainless steel with VG-10 cutting edge
Blade Treatment: -
Handle: Zytel and steel liners
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed length 123mm.
Total length: 210mm.
Closed thickness: 21.5mm.
Balancing: -
Weight: 144g.
Closure: Arc Lock
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with SOG logos
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Previously used, with some marks on the handle. 
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small marks given by time.
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Satin finish
Handle: Stainless steel and briar
Blade Length: 55mm.
Blade thickness: 1.5mm.
Length closed: 74mm.
Total length: 128mm.
Thickness when closed: 13mm.
Weight: 36g.
Closure: Frame Lock
Clip: Removable, stainless steel
Notes: special collaboration between Spyderco (who designed the knife) and Fox (who made it, using materials typical of Mediterranean culture such as olive wood and amboine briar) knife previously purchased, from a private collection

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory

Intended use: Tactical / Collection

Type of production: Industrial
Blade production: Italy
Blade: N690Co 58HRC stainless steel
Blade Treatment: DLC
Handle: G-10 and titanium
Blade length: 95mm. partially serrated edge
Blade thickness: 4mm.
Closed length: 130mm.
Total length: 225mm.
Thickness when closed without clip: 10mm.
Balancing: -
Weight: 152g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -

Knife Withdrawn from Private Collection
Type: Previously Purchased
Condition: Excellent
Available in the market: No
Sharpening: Original
Marks on the blade: No
Marks on the handle: No
Packaging: Yes
Sheath: In Kydex
Manuals, Certificates, and Warranties: Yes
Checked and Certified by our internal laboratory
Intended Use: Tactical/CQC

Type of Production: Industrial
Blade Production: Italy
Blade: Full tang in N690Co steel 58/60HRC
Blade Treatment: Teflon Coating
Handle: G-10
Blade Length: 75mm.
Blade Thickness: 4mm.
Closed Length: -
Total Length: 195mm.
Thickness when closed: -
Balance: Backward, at 3cm.
Weight: 170g.
Lock: -
Clip: on the sheath
Sheath: in Kydex
Packaging: Gray cardboard box with Fox logos
Notes: -

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased - knife no longer in production since
* Condition: in excellent condition, like new
* Commercially available: difficult to find
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original Sog box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: Japan
Blade: VG-10 stainless steel
Blade treatment: -
Handle: GRN
Blade length: 74mm.
Blade thickness: 2.5mm.
Closed length: 114mm.
Total length: 178mm.
Thick when closed: 7mm.
Balancing: -
Weight: 113g.
Closure: Arc-Lock Pendulum
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with SOG logos
Note: -