Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private seller, previously purchased
* Condition: In excellent mechanical condition - good cosmetic condition
* Commercially available: Discontinued
* Sharpening: Professionally resharpened
* Marks on blade: Several signs of oxidation on the blade and minor abrasions, which do not compromise its practical use
* Marks on handle: None
* Box: Missing
* Sheath: In excellent condition
* Manuals, Certificates, and Warranties: None
* Inspected and certified by our in-house laboratory

Intended Use: Tactical

Manufacturing Type: Industrial
Country of Manufacture: USA
Blade: Full tang, CPM-S30V steel
Blade Finish: Tungsten DLC
Handle: G-10 with 3D machining
Blade length: 105 mm.
Blade thickness: 4.5 mm.
Overall length: 205 mm.
Balance: 1.5 cm rearward
Weight: 264 g.
Sheath: thermoformed Kydex
Notes: designed by Mick Strider

KNIFE FROM A PRIVATE COLLECTION
* Origin: Previously purchased knife from a private collection
* Condition: 2008 model, overall in excellent condition
* Commercial Availability: Discontinued
* Sharpness: Factory-sharpened, could be improved
* Blade Condition: Minor cosmetic marks on the DLC finish due to age
* Handle Condition: None
* Box: -
* Sheath: Included
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The Zero Tolerance 0100 is one of the first knives produced by Zero Tolerance, the premium division of Kai USA, which was launched in 2006 to develop professional tools for military personnel, law enforcement, and first responders. The 0100 model was, in fact, one of the first three fixed-blade knives in the original lineup, alongside the 0121 and 0150 models.

The design bears the unmistakable stylistic signature of Ken Onion, the renowned American designer already responsible for numerous successes at Kershaw. The distinctive “S”-curved blade offers an unusual combination of cutting ability, power, and precision, making the ZT0100 suitable for both tactical applications and the most demanding outdoor use.

For its construction, Zero Tolerance chose CPM 3V, a steel then considered cutting-edge for its strength and impact resistance, paired with a tungsten DLC coating and three-dimensionally machined G-10 scales. This combination helped solidify the brand’s early reputation as a manufacturer of “overbuilt” knives, designed without compromise for field use.

Today, the ZT 0100 is a discontinued model particularly prized by collectors, as it is considered one of the knives that helped define the Zero Tolerance brand’s identity in its early years.

Intended Use: Tactical / Sporting / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Full tang, CPM-3V carbon steel
Blade Finish: Tungsten DLC coating
Handle: G10
Blade Length: 146mm.
Blade thickness: 4.8 mm.
Overall length: 267 mm.
Weight: 317 g.
Sheath: Nylon, belt-mounted, with thermoformed Kydex lining
Packaging: -
Notes: Previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Like new, never used, no packaging
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Tigerstripe black-oxide BlackWash
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: knife previously purchased and used, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

* Provenance: collected from a private individual, previously purchased
* Condition: Like new, never used
* Available on the market: discontinued
* Sharpening: factory
* Signs on blade: none
* Signs on handle: none
* Box: -
* Sheath: equal to the new
* Manuals, Certificates and Guarantees: -
* Controlled and Certified by our in-house laboratory

The Benchmade Lone Wolf Mountainside Skinner takes the classic skinning knife to the next level. Designed with a traditional line and a handle angle designed to maximize ergonomics, it offers surprising comfort even during prolonged use. The blade pin features wide knurls (jimping) that ensure safe grip control, while the generous finger choil allows for a stable and precise hand position during the most delicate work phases.

Born from the Lone Wolf philosophy, this knife reflects a deep dedication to the outdoors: combining the contributions of professional hunters, modern technology, and a timeless traditional style, the result is a reliable and high-performance tool, designed to accompany you when it really matters. This is your knife.

Intended use: Sporty / Collection

Type of production: industrial
Country of production: USA
Blade: Full tang in N680 stainless steel with stonewashed finish
Handle: Wood
Blade length: 6.4mm.
Blade thickness: 3.1mm.
Total length: 177mm.
Balance: Backward
Weight: 148g.
Sheath: leather
Note: Design by Lone Wolf Knives, Manufactured by Benchmade - Previously purchased knife, from a private collection

KNIFE FROM A PRIVATE COLLECTION
* Type: Previously purchased knife from a private collection
* Condition: Like new
* Availability: Rare and hard to find
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Original
* Sheath: In excellent, complete condition
* Manuals, Certificates & Warranty: Ka-Bar
Inspected and certified by our in-house laboratory

The KA-BAR BK72 represents the ultimate evolution of a survival knife icon. As the heir to the famous Becker BK2/BK22, it retains their toughness and reliability while enhancing performance thanks to the premium CPM S35VN steel. Built full tang with a 6.35 mm thick blade, it offers outstanding strength and optimal handling.

The black micarta handle ensures a firm grip in any condition, while the available finishes — stonewashed or black DLC coating — provide a modern and functional aesthetic. A knife that combines durability, precision, and style, perfect for outdoor, survival, and professional use.

Intended use: survival / outdoor / heavy-duty
Production type: exclusive Knivesandtools edition (KA-BAR–Knivesandtools collaboration)
Country of origin: USA
Blade: CPM S35VN steel (full tang, 6.35 mm thick)
Blade finish: stonewashed (KABK72) or black DLC coating (KABK72BK)
Handle: black micarta
Blade length: approx. 13.2 cm
Blade thickness: 6.35 mm
Closed length: 107 mm
Overall length: approx. 270 mm
Closed thickness: estimated between 12–15 mm
Weight: approx. 435 g
Locking mechanism: fixed blade, no locking system
Clip: none (includes kydex sheath)
Packaging: original box
Notes: hardness approx. 58 HRC

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Overall in good condition, shows some minor cosmetic marks on the heat treatment of the titanium handles, clip, and blade, which do not compromise its practical use in any way
* Available on the market: Out of production and no longer available on the market
* Sharpness: Factory sharp
* Marks on blade: Minor cosmetic marks due to carrying and use
* Marks on handle: Minor cosmetic marks due to wear and tear
* Box: Knife sold in a nylon bag with EOS logos and a titanium key to adjust the blade tension
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

EOS Prawn – The first friction folder by EOS
The Prawn marks EOS's debut in the world of friction folders, offering a compact and robust solution for everyday use. Featuring a flamed titanium handle and CPM-S35VN sintered steel blade, it combines robustness and exclusive design.

Although it does not have a blade lock, the adjustable washer system allows you to keep the blade in the open or closed position by adjusting the tension. Its compact size makes it ideal for carrying in your pocket, backpack, or tactical bag.

Intended use: Tactical/EDC/Collection

Production type: Midtech
Country of manufacture: USA
Blade: CPM S35VN steel
Blade treatment: Stonewashed
Handle: Flamed titanium
Blade length: 68mm.
Blade thickness: 4mm.
Closed length: 83mm.
Total length: 135mm.
Closed thickness: 12mm.
Weight: 93g.
Closure: Friction Folder (without blade lock)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Notes: knife from a private collection, previously purchased and used, equipped with its original nylon pouch with which it was sold and a small titanium key to be used to adjust the tension and fluidity of the blade opening

Intended use: Collection and EDC (Everyday Carry)
Production type: Industrial
Country of manufacture: USA
Blade: Tru-Sharp™ stainless steel
Blade finish: Mirror polished
Handle: Amber Bone Peach Seed Jig
Blade length: 69mm
Blade thickness: 2.3mm
Closed length: 107mm
Total length: 176mm
Closed thickness: 10mm
Weight: 56g
Locking mechanism: Back Lock
Clip: None
Packaging: Cardboard box with Case logos
Notes: Iconic Case model, available in limited quantities

Knife withdrawn from a private collection

• Origin: Withdrawn from a private owner, previously purchased and used
• Condition: Like new
• Availability: Discontinued
• Factory edge: Yes
• Blade marks: None
• Handle marks: None
• Box: Not included
• Sheath: Not included
• Manuals, Certificates, and Warranties: Not included
• Inspected and certified by our internal laboratory

One of our first ZT models and still one of the most popular, now offered in a limited edition with a CPM-MagnaCut steel blade.

The 0350 is a large and aggressive knife, yet compact and light enough to make it a practical and highly effective EDC. It features ZT's assisted opening system: the blade deploys quickly and easily, even with gloves, thanks to the ambidextrous flipper. The blade is finished with a bold and distinctive tiger-stripe pattern created with tungsten DLC coating.

Intended use: Tactical / Military

• Production type: Industrial
• Country of origin: USA
• Blade material: CPM-MagnaCut steel
• Blade finish: Tungsten DLC Coating
• Handle: G-10
• Blade length: 90mm
• Blade thickness: 3mm
• Closed length: 115mm
• Overall length: 195mm
• Closed thickness: 13mm
• Weight: 162g
• Locking mechanism: Liner Lock
• Clip: Removable, multi-position, stainless steel
• Packaging: Not included
• Notes: Sprint Run edition with CPM-MagnaCut steel - Design by Mick Strider and Ken Onion - SpeedSafe opening system

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

Exclusive product created in collaboration with the PDT YouTube channel - The Cutthroat's Park. This unique knife was actually used in a field test that you can view directly in this product sheet.

To make it even more special, we engraved Floriano's autograph and the PDT logo on the blade. The box of the knife was also autographed by Floriano making it a must-have collector's item.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: Floriano of the PDT Parchetto del Tagliagole.
* Condition: Overall in good condition.
* Commercially available: Still in catalog.
* Sharpening: Factory sharpened, stropped by Floriano after use.
* Marks on blade: Signs of concrete use on blade finish.
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: USA
Blade: full tang in CPM-3V steel
Blade treatment: Microbead blasting and Cerakote
Handle: G10 with stainless steel guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex
Packaging: cardboard box with ZT logos.
Notes: knife used in a YouTube video review by Floriano of PDT

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, minor marks on clip and hardware.
* Commercially available: Discontinued
* Sharpening: Factory sharpened, can be improved.
* Marks on blade: None
* Marks on handle: Small marks on clip and hardware.
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: / /
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Sporting

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel S35VN
Blade finish: Satin finish
Handle: G10 and Titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Total length: 216mm.
Thickness when closed: 13mm.
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Packaging: not present
Notes: previously purchased knife from a private collection - made in collaboration with Emerson Knives - Patented Wave opening system

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION

* Origin: Withdrawn from a private individual, previously purchased
* Condition: like new
* Commercially available: no longer in production
* Sharpening: original
* Marks on blade: -
* Marks on handle: -
* Box: NO
* Sheath: NO
* Manuals, Certificates and Guarantees: NO
* Checked and Certified by our internal laboratory

Intended use: Tactical/Military

Type of production: Industrial
Blade production: USA
Blade: CTS204P stainless steel
Blade treatment: -
Handle: Carbon Fiber and Titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Total length: 216mm.
Thickness when closed: 13mm.
Balance: -
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, in stainless steel
Sheath: -
Packaging: cardboard box with Zero Tolerance logos
Notes: in collaboration with Emerson Knives - Patented Wave opening system

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Commercially available: discontinued
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original ZT box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: USA
Blade: CTS-204P stainless steel
Blade treatment: stone washed and satin finish
Handle: Titanium with anodized spacers
Blade length: 87mm.
Blade thickness: 4mm.
Closed length: 112mm.
Total length: 193mm.
Thick when closed: 14mm.
Weight: 178g.
Closure: Framelock
Clip: Removable, reversible, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmirty Sinkevich - KVT opening on ball bearings

Knife from a private collection - Iconic and sought after model designed by Ken Onion and Mick Strider - Out of production and no longer available - Perfect in all, like new, serial 1544, does not have any kind of sign or defect - The knife shows an uncertainty at the tip, on the sharpening, which is slightly different; presumably already produced in this way by ZT - The sharpening is good and shows no signs of wear, presumably the sharpening is the original factory - Accompanied by original Zero Tolerance box, but referred to the model 0301 with green G10 handle - Checked and certified by our internal laboratory

Intended Use: Collection / Tactical / Military

Production type: Industrial
Country of Production: USA
Blade: Steel CPM-S30V
Blade Finish: Tigerstripe - Tungsten DLC Coating
Handle: Titanium and G-10 with 3D finish
Blade Length: 95mm.
Blade thickness: 4mm.
Length closed: 133mm.
Total length: 218mm.
Thickness when closed: 17mm.
Weight: 232g.
Closure: Frame Lock
Clip: Removable, Multiposition, Stainless Steel
Package: Cardboard box with Zero Tolerance logos (the box refers to a different model, 0301)
Notes: Design by Mick Strider and Ken Onion - SpeedSafe opening system - Like new - Retired from prvated collection

Piscitelli - Hunt horn hammered blade - CCC03/2 - handmade knife KNIFE WITHDRAWN FROM PRIVATE COLLECTION

• Type: Previously Purchased
• Condition: like new
• Available in commerce: NO the craftsman stopped producing knives a few years ago
• Sharpening: Original
• Marks on blade: NO
• Marks on handle: NO
• Packaging: YES
• Checked and Certified by our internal laboratory

Typical knife for the hunter. It is a robust and concrete knife. The tip is slightly lowered to work in cavities, and the blade has a deep curve for skinning.

Features:

• steel: AISI 420
• hardness: 54/56 HRC
• total length: 18cm
• blade length: 7.5cm
• blade thickness: 2mm
• weight: 68gr
• fittings: horn
• notes: handcrafted
• accompanied by a warranty certificate

Piscitelli has been making knives in Frosolone for three generations, a small town in the Molise hinterland known for its knife-making. The Art, Style and Tradition allow us to give importance and originality to our creations handed down from generation to generation.

Giovanni Piscitelli, born in Frosolone (IS). The passion for collection and hunting knives I inherited from my father (master craftsman) from whom I also inherited the most sophisticated techniques. My knives are unique pieces, strictly handcrafted.

When producing a knife, there are many elements that make a difference. In addition to a difference in value in the choice of materials, it is the labor required to perform certain operations, closely connected to the construction complexity that makes the knife more valuable. The reasons that justify the differences can also lie in the processing of the blade, or of the handle (elements that it is good to remember are modeled and finished exclusively by hand).