Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.

In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition
* Commercial Availability: Discontinued in this steel variant
* Sharpness: Factory-sharpened
* Marks on blade: None
* Marks on handle: Minor cosmetic signs of wear on the clip and screws
* Box: Included
* Sheath: -
* Manuals, Certificates, and Warranties: Included
* Inspected and certified by our in-house laboratory

The Microtech Socom Elite is one of the most iconic folding knives produced by Microtech, prized for its combination of durability, ergonomics, and reliability. Designed for professional and tactical use, over the years it has also established itself as a benchmark among collectors and enthusiasts of high-end cutlery.

The model presented here, manufactured in 2019, features a blade made of Carpenter CTS-204P steel, one of the best high-performance stainless steel alloys in its class, known for its excellent edge retention, high corrosion resistance, and outstanding wear resistance. The black/dual-tone finish contributes to its particularly aggressive and professional appearance.

The aluminum handle with non-slip inserts ensures a firm and comfortable grip even under the most demanding conditions, while the manual thumb stud opening system and the proven liner lock mechanism guarantee quick deployment and safety during use.

Thanks to Microtech’s signature build quality and a design that has become an industry classic, the Socom Elite is an excellent choice for both everyday use and for collectors seeking one of the most iconic models in the American brand’s modern lineup.

Intended Use: Tactical, EDC

Production Type: Industrial
Country of Manufacture: USA
Blade: Carpenter CTS-204P stainless steel
Blade Finish: “Normal” (Black PVD + Satin)
Handle: Aluminum with non-slip inserts
Blade Length: 101mm
Blade thickness: 4 mm
Closed length: 127 mm
Overall length: 228 mm
Closed thickness: 15 mm
Weight: 157 g
Lock type: Liner Lock
Clip: Stainless steel, removable
Packaging: Microtech box with manuals
Notes: Previously purchased knife, from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual; previously purchased and used
* Condition: Structure intact, no functional compromises, fully operational and ready for use. Presence of slight surface marks on the finish and signs of age.
* Available on the market: Discontinued
* Sharpening: Factory-sharpened
* Marks on blade: Slight surface marks on the finish
* Marks on handle: None
* Box: /
* Sheath: Nylon, belt-mounted
* Manuals, Certificates, and Warranties: /
* Inspected and Certified by our in-house laboratory

This Mick Strider-signed BT model features a black blade with a knurled thumb rest, a thickness of 6.4mm, and a full-tang construction to ensure maximum strength and durability.

The handle features green MEFP scales with a lanyard hole and an integrated pry bar on the back. Comes complete with a nylon sheath with a belt loop.

Strider Knives

Founded and run by former military personnel, Strider Knives is a company specializing in the development of cutting tools designed to withstand the most extreme operating conditions. The initial goal was to create a reliable utility knife, built with the highest quality materials yet affordable and easy to maintain by field personnel.

Over time, the brand has established itself as a benchmark in the world of tactical and professional knives, thanks to models developed specifically to meet the needs of military personnel, law enforcement, special operations personnel, hunters, and professional divers. Every design stems from a practical and functional approach, focused on maximum durability and reliability in the field.

Intended Use: Tactical / All-Rounder Utility

Production Type: Midtech
Country of Manufacture: USA
Blade: Full tang, CPM-3V crucible steel
Blade Finish: Black Coating
Handle: G10
Blade length: 161mm.
Blade thickness: 6.4mm.
Overall length: 308mm.
Balance: rear-weighted
Weight: 410g.
Sheath: Nylon, belt-mounted
Packaging: -
Notes: Previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

The Benchmade Anthem is one of the most daring and iconic knives ever made by the American brand. A “carte blanche” project, now out of production, it stands out for its integral monoblock titanium construction, high-level mechanical workmanship, and the best interpretation ever of the famous Axis Lock, redesigned here to ensure exceptional strength and fluidity. Elegant, slim, and surprisingly ergonomic, the Anthem is not just a knife, but a true statement of passion and engineering, designed for connoisseurs and collectors.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV steel 59/61HRC
Blade treatment: stonewashed
Handle: integral, bronze-colored anodized titanium
Blade length: 89mm.
Blade thickness: 2.85mm.
Closed length: 116mm.
Total length: 205mm.
Weight: 104g.
Closure: Axis Lock
Clip: Anodized titanium
Packaging: Cardboard box with Benchmade logos
Notes: knife out of production, previously purchased, from a private collection

KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available In production.
* Sharpening: Factory sharpened, perfect
* Marks on blade: None
* Marks on handle: Slight abrasion marks in contact surfaces between blade and titanium handle and on T-Latch block due to engagement of block and opening/closing of knife
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory


Intended use: sports/collection

Production Type: Industrial
Blade Production: USA
Blade: stainless steel CPM-S30V 58/60HRC
Blade treatment: satin finish
Handle: CNC-machined micro-bead-blasted titanium
Blade length: 112mm.
Blade thickness: 3.1mm.
Length closed: 139mm.
Total length: 254mm.
Weight: 149g.
Closure: T-latch
Sheath: Black nylon
Packaging: Cardboard box with Benchmade logos
Notes: previously purchased knife, overall in very good condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: knife from 1992 in perfect mechanical condition and excellent aesthetic condition, showing only a few small scratches on the steel heads
* Available on the market: Out of production and difficult to find, model marketed in the 1990s
* Sharpness: Factory sharp
* Marks on blade: none
* Marks on handle: very small scratches/hairlines on the steel heads
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

The Buck 551, often known as “King Charles II,” is a vintage folding knife produced in the United States between the early and mid-1990s in limited quantities.

Appreciated by collectors and enthusiasts of historic American knives, it is a more compact version than other Buck models from the same period, designed for everyday use but with careful workmanship and reliable materials. 

The 420HC stainless steel blade offers good edge retention and corrosion resistance, while the laminated wood scales with polished steel bolsters give it a classic, understated look that echoes the style of traditional Buck knives.

Intended use: EDC / Sports / Hunting

Type of production: industrial
Blade: 420HC stainless steel
Blade finish: Satin
Country of manufacture: USA
Handle: steel bolsters and laminated wood
Blade length: 70mm.
Blade thickness: 2mm.
Closed length: 98mm.
Overall length: 168mm.
Weight: 70g.
Locking system: Back lock
Clip: -
Packaging: -
Notes: vintage knife from 1992, previously purchased, from a private collection

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: In excellent condition, shows a scratch of about 2.5 cm on the blade
* Commercial Availability: Hard to find
* Sharpening: Factory edge, can be improved
* Blade Marks: shows a scratch of about 2.5 cm on the blade
* Handle Marks: -
* Box: -
* Sheath: in excellent condition, complete
* Manuals, Certificates and Warranties: -
Checked and Certified by our in-house workshop

The Buck 192 Vanguard is a premium-quality hunting knife, made in the USA and designed to deliver outstanding performance in all outdoor situations. The ergonomic handle made of fine wood with brass fittings gives the knife a classic and sturdy appearance, while the drop point blade in 420HC stainless steel ensures a reliable and long-lasting cut.

192 - with hyphen: this model features the marking “192-”, a production detail found on Buck knives made in the 1990s. This makes the knife particularly interesting for collectors and fans of the American brand.

Blade length: 102 mm
Total length: 216 mm
Blade material: 420HC stainless steel
Handle: fine wood with brass bolsters and scales
Sheath: high-quality brown leather
Production: Made in USA

This knife is ideal for hunting, hiking, camping, or as a collectible item. The Buck 192 Vanguard combines functionality, design, and reliability in a single tool appreciated worldwide.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and modified with aftermarket parts
* Condition: Like new
* Available on the market: Basic version available on the market
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

Customized and modified by the previous customer with various premium quality aftermarket parts, it comes with all the original accessories to restore it to the manufacturer's original specifications and includes all the packaging for the modifications made, listed below and already mounted on the knife:

MODIFICATIONS MADE (commercial value €125)
* LynchNW - Stubby Clip Stonewashed in 6AL-4V grade 5 titanium (commercial value €35)
* August Engineering - Titanium Hardware Kit Raw Black, titanium screws and spacers (commercial value €30)
* Flytanium - Premium Kit Canvas Micarta Scales (commercial value €41)
* Flytanium - Slotted Thumbstud Kit, titanium opening pin (market value €19)

Intended use: Sports/EDC

Type of production: Industrial
Country of production: USA
Blade: CPM-S30V steel 58/60HRC
Blade finish: Stonewashed
Modified handle: Premium Green Canvas Micarta by Flytanium with Raw Black titanium screws and spacers by August Engineering
Original handle: 6061-T6 aluminum with green anodization and purple anodized spacers (included)
Blade length: 74mm.
Blade thickness: 2.7mm.
Closed length: 97.5mm.
Total length: 172mm.
Closed thickness: 10mm.
Weight: 57g.
Lock: AXIS Lock
Modified clip: stonewashed titanium, deep pocket by LynchNW
Original clip: Removable and reversible, stainless steel 
Packaging: Cardboard box with Benchmade logos + Aftermarket product boxes and packaging
Notes: Previously purchased product from a private collection - Design by Warren Osborne

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never removed from its original packaging
* Available on the market: Difficult to find, only 200 pieces made
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

SUPER COMPACT WITH TOP-OF-THE-LINE STEEL AND INTERCHANGEABLE SIDE PLATES
Here is the ideal fixed blade hunting knife for eviscerating and processing ungulates, which can also be used as a bushcraft knife. Produced in a limited edition of only 200 pieces by Coltellerie Maserin for Forest Italia, it combines compactness, excellent materials, and details designed for the most demanding hunter.

It is a true masterpiece of a hunting knife: compact size, ergonomic handle, and a partially serrated blade in N690 steel at 60 HRC, designed to ensure maximum effectiveness in evisceration and skinning.

The set is completed by three pairs of interchangeable scales—in olive wood, black G10, and orange G10—an elegant leather sheath, and a dedicated case. Fully dismountable, it is easy to clean and maintain over time.

An exceptional work tool and, at the same time, a valuable gift idea for any hunter.

Intended use: Hunting / Sporting

Type of production: Industrial
Country of production: Italy
Blade: full tang in N690Co stainless steel at 60HRC
Blade treatment: Satin finish
Handle: Olive wood + black G10 + orange G10
Blade length: 85mm.
Blade thickness: 4 mm.
Total length: 190 mm.
Balance: on the guard branch
Weight: 128 g.
Sheath: leather
Packaging: cardboard box with Forest Italia / Maserin logos
Notes: limited edition of only 200 pieces - knife previously purchased from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Mechanically perfect, with obvious signs of wear on the blade finish that do not compromise its practical use in any way 
* Available on the market: Introduced in 2001, now out of production
* Sharpening: Resharpened several times, professionally resharpened before being offered for sale
* Marks on blade: Multiple superficial cosmetic marks
* Marks on handle: a few small marks due to use
* Box: None
* Sheath: None
* Manuals, Certificates, and Warranties: None
* Checked and Certified by our in-house lab

Intended use: EDC / Light Utility

Type of production: Industrial
Country of production: USA
Blade: CPM-154CM stainless steel
Blade finish: Burnished
Handle: Aluminum
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 200mm.
Weight: 82g.
Closure: Axis Lock (Crossbar Lock)
Clip: Removable and reversible, in burnished stainless steel
Packaging: -
Notes: discontinued model no longer available on the market - knife previously purchased and used, from a private collection - mechanically perfect with obvious signs of wear that do not compromise its practical use in any way.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used and never removed from the sales box
* Available on the market: Out of production, limited edition of only 20 numbered pieces
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present
* Manuals, certificates, and warranties: Present
* Checked and certified by our in-house laboratory

Intended use: Tactical/light utility

Type of production: Industrial
Country of production: Italy
Blade: Full tang in N690Co 58HRC stainless steel
Blade treatment: Black PVD
Handle: G10
Blade length: 107mm.
Blade thickness: 4mm.
Total length: 230mm.
Balance: rearward
Weight: 195
Sheath: handmade vegetable-tanned leather, entirely handmade and hand-stitched
Packaging: wooden box with pyrographed logos
Notes: Limited edition of only 20 numbered pieces, on the blade, sheath, and wooden box - Knife previously purchased from a private collection - L.E.O. stands for Law Enforcement Only - designed by Tommaso Rumici

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never removed from its original packaging
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

Built on a solid foundation, the redesigned Altitude takes ultralight hunting gear to new heights. This minimalist fixed blade features carbon fiber scales for better control of the CPM-S90V blade. This incredible ultralight cutting tool earns its place by your side thanks to its balance of corrosion resistance, strength, and edge retention.

Intended use: Hunting / Light Utility

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-S90V stainless steel (59/61HRC)
Blade treatment: Orange Cerakote
Handle: CPM-S90V stainless steel with carbon fiber scales
Blade length: 78mm.
Blade thickness: 2.3mm.
Overall length: 175mm.
Weight: 47g.
Sheath: Boltaron, can be worn around the neck or compatible with M.O.L.L.E. or UltiClip attachments 
Packaging: cardboard box with Benchmade logos
Notes: knife out of production, previously purchased, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, a couple of imperceptible marks on the inner folders, on the back of the knife.
* Commercially available: Commercially available.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: a couple of imperceptible marks on the inner folders, on the back of the knife
* Box: Present
* Scabbard: Microfiber bag.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Utility / Hiking / Tactical

Production Type: Industrial
Country of Production: USA
Blade: CPM-CRUWEAR 63/65HRC tool steel
Blade finish: Tungsten gray
Handle: G10 with PVD stainless steel folders
Blade length: 82.6mm.
Blade thickness: 3.6mm.
Length closed: 111mm.
Total length: 193mm.
Handle thickness: 16mm.
Weight: 130g.
Closure: AxisLock
Clip: Deep Pocket, removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos, microfiber pouch with Benchmade logos
Notes: previously purchased knife, from a private collection - high carbon steel blade, not stainless; wash and dry carefully after use and grease if storing

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, to be evaluated for potential resharpening.
* Commercially available: Discontinued
* Sharpening: Factory, still in good condition, but with small oxidation spots on the tip (can be easily removed by resharpening the knife, but we intentionally left the factory sharpening excellent)
* Marks on blade: A few imperceptible signs of use on the blade.
* Marks on handle: None
* Box: Present
* Scabbard: Microfiber bag.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: EDC/Gentleman

Production Type: Industrial
Country of Production: USA
Blade: Stainless Steel CPM-S30V 58/60HRC
Blade treatment: satin finish and stone washed
Handle: micarta
Blade length: 73mm.
Blade thickness: 2.3mm.
Length closed: 98mm.
Total length: 170mm.
Thickness when closed: 10mm
Weight: 66g.
Closure: SlipJoint (without blade lock)
Packaging: cardboard box with Benchmade logos
Notes: previously purchased knife, withdrawn from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Like new, never used
* Commercially available: Limited and numbered custom edition, discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Not Present
* Checked and Certified by our in-house laboratory

Microtech Marfione Custom ANAX - Limited Series 2015
In 2015, Anthony Marfione created a limited and numbered series of the famous ANAX, a folding integral knife that marked a turning point in custom design. Winner of the “Most Innovative Knife of the Year” award at the 2014 Blade Show, the ANAX combines functionality, futuristic aesthetics, and top-of-the-line materials. The custom models produced that year stand out for their handcrafted finishes, unique material variations, and exclusive accessories, quickly becoming collector's items coveted on a global scale.

Data Sheet.
Intended Use: Tactical, EDC
Type of production: Custom
Country of Production: USA
Blade: Elmax Stainless Steel
Blade Finish: Tri-Tone Black DLC
Handle: Carbon fiber and titanium with Black DLC finish and hardware
Blade length: 95mm
Blade thickness: 4mm
Length closed: 125mm
Total length: 219mm
Thickness when closed: 12mm
Weight: 99g
Closure: Sub Frame Lock in titanium with Black DLC finish
Clip: Titanium with Black DLC finish
Packaging: Marfione Custom box with external serial number, nylon zippered pouch, microfiber pouch, titanium patch with Marfione logo
Notes: 05/2015 limited run custom edition, specimen number 075, numbered on blade and box

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Used, overall in good condition, with cosmetic signs of wear and tear on the blade that in no way compromise its concrete use
* Commercially available Out of production.
* Sharpening: Re-sharpened
* Marks on blade: Many cosmetic scratches from use that do not compromise its use
* Marks on handle: Small marks on handle screws from disassembly of parts.
* Box: Not present
* Scabbard: Present, original, complete with all its parts, in very good condition.
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory.

WP4 Rough Wolf is a knife researched and designed by chief instructor Paolo Bozzo of Wolfpack Survival Training (survival and survival school). This design was developed through years of direct experience in the field and further improves on the STF-3 model previously made in collaboration with Fox FKMD

Intended Use: Survival/Utlity

Production type: Industrial
Country of Production: Italy
Blade: Stainless Steel N690Co
Blade Finish: Black Stonewashed
Handle: Sand G10
Blade Length: 190mm.
Blade thickness: 5.8mm.
Total Length: 320mm.
Balance: Advanced to 3cm. from guard branch
Weight: 566g. (772g. with scabbard)
Sheath: by Radar, made of Kydex with multi-position Keyblock attachment
Packaging: without original packaging
Notes: designed by Paolo Bozzo - discontinued knife, withdrawn from a private collection, previously purchased and used, but in good condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Not present
* Scabbard: Microfiber pouch with Benchmade logos.
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory

The Benchmade Contego, discontinued in 2019, is a tactical folding knife that combines high-end performance and rugged design. This limited edition has a Black and Blue G10 handle and an M390 stainless steel blade, known for its exceptional edge retention and corrosion resistance, the Contego is ideal for those seeking a versatile and durable knife. With its ambidextrous AXIS locking mechanism, this knife is designed for reliability and comfort in any situation.

Intended Use: Tactical / Sporting / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel M390
Blade finish: satin-finished
Handle: G10
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 167g.
Closure: Axis Lock
Clip: Removable and reversible, satin-finished stainless steel
Sheath: microfiber pocket with Benchmade logos
Packaging: Without original packaging
Notes: special edition of Contego model, discontinued as of 2019, previously purchased knife from a private collection

Intended use: Collection and EDC (Everyday Carry)
Production type: Industrial
Country of manufacture: USA
Blade: Tru-Sharp™ stainless steel
Blade finish: Mirror polished
Handle: Amber Bone Peach Seed Jig
Blade length: 69mm
Blade thickness: 2.3mm
Closed length: 107mm
Total length: 176mm
Closed thickness: 10mm
Weight: 56g
Locking mechanism: Back Lock
Clip: None
Packaging: Cardboard box with Case logos
Notes: Iconic Case model, available in limited quantities

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: 2015 specimen, like new
* Commercially available: Still in production
* Sharpening: Factory sharpened
* Marks on blade: No
* Marks on handle: None
* Box: Absent
* Scabbard: Present
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: All Rounder Utility

Production type: Industrial
Country of Production: USA
Blade: 420HC stainless steel engraved
Blade finish: mirror polish
Handle: wood and brass
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 220mm.
Thickness when closed: 16mm.
Weight: 205g.
Closure: Back Lock
Sheath: nylon sheath
Packaging: not present
Notes: previously purchased knife from private collection

Buck 560BT Black Nitride XLTi Titanium is a collectible folding knife manufactured in the United States in 1993. This distinctive model combines high-quality materials with functional design, making it a sought-after piece by both collectors and knife enthusiasts.

This item comes from a private collection and is in excellent condition, featuring a flawless blade and a perfectly preserved handle. Supplied with its original packaging and leather sheath, it represents a rare opportunity for true Buck aficionados.

Type: Previously Purchased
Condition: Excellent
Availability: Discontinued since the late '90s
Sharpening: Factory edge
Blade marks: None
Handle marks: None
Packaging: Complete, original cardboard box with manufacturer logos
Sheath: Cordura
Manuals, Certificates and Warranties: Warranty certificates included
Inspected and Certified: By our in-house lab

Intended use: Collection
Production type: Industrial
Country of manufacture: USA
Blade: 425M stainless steel
Blade finish: Black nitride
Handle: Titanium with black nitride finish
Blade length: 95 mm
Blade thickness: Not specified
Closed length: 107 mm
Total length: 219 mm
Closed thickness: Not specified
Weight: Not specified
Locking mechanism: Lockback
Clip: Not present; supplied with original Buck nylon sheath
Packaging: Original Buck box
Notes: Limited edition 1993; titanium handle with black nitride finish; includes original Buck nylon sheath

PREVIOUSLY PURCHASED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: knife previously purchased, withdrawn from a private collection.
* Condition: like new, never used
* Commercially available: discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Microfiber pouch.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Annually Benchmade releases a limited edition knife model under its Gold Class line. These Benchmade Gold Class knives are made from the finest materials and feature the highest level of workmanship. Each Benchmade Gold Class knife series is limited and numbered.

This particular Gold model, the 750-101, has Damasteel blade with Infinity pattern, bronze anodized monolock titanium handle with black carbon fiber inserts contoured and handcrafted, the titanium back spacer is also bronze anodized. All hardware components are finished with DLC (including the pocket clip). This Gold Class series is limited to 200 pieces.

Intended Use: Collection

Type of production: Semi-Industrial
Country of manufacture: USA
Blade: stainless Damasteel with Infinity design
Handle: bronze anodized titanium and carbon fiber
Blade length: 91mm.
Blade thickness: 3.18mm.
Length closed: 119mm.
Total length: 212mm.
Weight: 127g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: Black fabric pouch with Benchmade logos 
Packaging: “Gold Class” cardboard box with Benchmade logos - Rubberized steel case with magnetic closure - Warranty certificates with date and numbering
Notes: Limited Edition 2010, Knife number #133 out of #200 - each piece is numbered on the blade

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: USA
Blade: CPM-3V steel
Blade Finish: Gray Coated
Handle: Grivory
Blade length: 86mm.
Blade thickness: 2.3mm.
Length closed: 119mm.
Total length: 205mm.
Thickness when closed: 10.4mm.
Weight: 58.4g.
Locking system: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: previously purchased knife from a private collection

Type: Previously purchased knife, from a private collection
Condition: Like new, never used
Commercial Availability: Discontinued
Edge: Factory edge
Blade Marks: None
Handle Marks: None
Box: Present
Sheath: -
Manuals, Certificates, and Warranties: Present
Inspected and Certified by our internal laboratory

Intended Use: Collection/Tactical
Type of Production: Semi-Industrial
Blade Production: USA
Blade: Stainless steel Damascus by Damasteel with Odin Heim pattern
Blade Treatment: -
Handle: Red and black carbon fiber with red anodized aluminum spacers
Blade Length: 90mm
Blade Thickness: 3.15mm
Closed Length: 119mm
Total Length: 210mm
Closed Thickness: -
Balance: -
Weight: 135g
Lock: Axis Lock
Clip: Removable and reversible, stainless steel
Sheath: Black fabric pouch with golden Benchmade logos
Packaging: "Gold Class" cardboard box with Benchmade logos - Rubber-coated steel case with magnetic closure
Notes: Limited Edition 2016, each piece is numbered on the blade

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of the box
* Commercially available: Still in catalog, but difficult to find.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Hunting/Light Utility

Production Type: Industrial
Country of Production: USA
Blade: stainless steel CPM-S35VN hardened by BOS
Blade finish: satin-finished
Handle: Micarta, with aluminum pommel and guard
Blade length: 152mm.
Blade thickness: 4.4mm.
Total length: 267mm.
Weight: 300g.
Scabbard: leather
Packaging: cardboard box with Buck logos
Notes: -

Exclusive product created in collaboration with the PDT YouTube channel - The Cutthroat's Park. This unique knife was actually used in a field test that you can view directly in this product sheet.

To make it even more special, we engraved Floriano's autograph and the PDT logo on the blade. The box of the knife was also autographed by Floriano making it a must-have collector's item.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: Floriano of the PDT Parchetto del Tagliagole.
* Condition: Overall in very good condition.
* Commercially available: Still in catalog.
* Sharpening: Factory sharpened, stropped by Floriano after use.
* Marks on blade: Small signs of concrete use.
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Utility / Hiking

Production Type: Industrial
Country of Production: USA
Blade: CPM-S30V 58/60HRC sintered stainless steel
Blade finish: Stonewash
Handle: G10
Blade length: 111mm.
Blade thickness: 4.2mm.
Total length: 229mm.
Weight: 218g.
Sheath: leather, with belt loop for vertical carry
Packaging: cardboard box with Benchmade logos
Notes: knife used in a YouTube video review by Floriano of PDT

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in good condition.
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: Minimal marks on left cheek piece.
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: USA
Blade: steel CPM-20CV 59/61HRC
Blade finish: satin finish
Handle: Black G10
Blade length: 82mm.
Blade thickness: 3.5mm.
Length closed: 101mm.
Total length: 186mm.
Weight: 102g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Absent
Notes: Previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new
* Commercially available: found.
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

The Compadre Camp Knife is the perfect ally for those who love adventure. With its 5160 steel blade and cobalt coating, it cuts with precision and stands up to any challenge. The sturdy and stylish Micarta handle provides a secure grip, making it ideal for the outdoors.

Intended Use: Bushcraft / Outdoor

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, made of 5160 steel at 57/58HRC hardened by BOS
Blade finish: Cobalt Cerakote
Handle: Natural Canvas Micarta
Blade length: 114mm.
Blade thickness: 3.8mm.
Total length: 241mm.
Weight: 199g.
Sheath: black leather
Packaging: cardboard box with Buck logos
Notes: previously purchased knife from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: brand new
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present, complete kit
* Scabbard: Microfiber pouch.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended use: sports/collection

Production type: Industrial
Country of manufacture: USA
Blade: steel D2 60/62HRC
Blade finish: satin finish
Handle: G10 and titanium
Blade length: 108mm.
Blade thickness: 2.5mm.
Length closed: 137mm.
Total length: 237mm.
Thickness when closed: -
Balance: -
Weight: 94g.
Closure: T-latch
Clip: titanium
Packaging: cardboard box with Benchmade logos
Notes: knife withdrawn from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended use: collectible/sporting

Production type: Industrial
Country of Production: Italy
Blade: DSC (N690Co + Nitro-B) 120-ply stainless damascus steel with Small Roses design
Blade treatment: /
Handle: Alpacca and Stag
Blade length: 63mm.
Blade thickness: 2.5mm.
Length closed: 79mm.
Total length: 142mm.
Thickness when closed: 15mm.
Weight: 59g.
Closure: Slip Join
Clip: absent
Sheath: leather pocket pouch
Packaging: wooden box with maserin logos
Notes: knife withdrawn from private collection, previously purchased

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition.
* Commercially available: Discontinued since 2014
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present, with a few small signs of time.
* Sheath: Microfiber bag with Benchmade logos.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of Production: USA
Blade: made of CPM-S30V steel at 58-60HRC
Blade finish: satin-finished
Handle: anodized titanium
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 245mm.
Handle thickness: 12.5mm.
Weight: 189.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Like new
* Commercially available Discontinued since 2015
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of manufacture: USA
Blade: Bohler M390 60/62HRC stainless steel
Blade Finish: Stone Washed
Handle: G10 and Titanium
Blade length: 73.5mm
Blade thickness: 4.15mm.
Length closed: 96.5mm.
Total length: 175mm.
Thickness when closed: 15.5mm.
Weight: 156g.
Closure: Frame Lock
Clip: Titanium, machined from billet
Packaging: Cardboard box with Benchmade logos
Notes: Design by Shane Sibert

COUTEAU DE RETRAITE PROVENANT D'UNE COLLECTION PRIVÉE - Modèle Buck 120 datant des années 90
* Type : déjà acheté
* Etat : en excellent état, comme neuf
* Disponible dans le commerce : disponible dans le commerce dans les versions les plus récentes
* Affûtage : Original
* Marques sur la lame : non
* Marques sur le manche : non
* Boîte : sans boîte
* Gaine : gaine en cuir noir d'origine
* Manuels, certificats et garanties : -
* Contrôlé et certifié par notre laboratoire interne

Utilisation prévue : Tactique

Type de production : Industrielle
Production Lama : États-Unis
Lame : acier inoxydable 420HC
Traitement de la lame : -
Manche : en Polymères
Longueur de la lame : 185 mm.
Épaisseur de la lame : 4,5 mm.
Longueur fermée : -
Longueur totale : 300 mm.
Epaisse fermée : -
Équilibrage : -
Poids : 228 grammes.
Fermeture: -
Agrafe: -
Fourreau : en cuir noir
Emballage: -
Noter: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present, original, but damaged
* Scabbard: Present, original, like new.
* Manuals, Certificates and Warranties: Yes
* Checked and Certified by our in-house laboratory



WP4 Rough Wolf is a knife researched and designed by chief instructor Paolo Bozzo of Wolfpack Survival Training (survival and survival school). This design was developed through years of direct experience in the field and further improves on the STF-3 model previously made in collaboration with Fox FKMD

Intended Use: Survival/Utlity

Production type: Industrial
Country of Production: Italy
Blade: Stainless Steel N690Co
Blade Finish: Black Stonewashed
Handle: Green G10
Blade Length: 190mm.
Blade thickness: 5.8mm.
Total Length: 320mm.
Balance: Advanced to 3cm. from guard branch
Weight: 566g. (772g. with scabbard)
Sheath: by Radar, in Kydex with multi-position Keyblock attachment
Packaging: cardboard box with Wolfpack Survival logos
Notes: designed by Paolo Bozzo




Dear Friend,
I am Paolo Bozzo and many times ml have found myself in unpleasant, pericolase and difficult situations. Designing a knife and testing it just a few afternoons in the woods is quite different than designing one trying to solve all those survival problems I have encountered in the last 25 years, both In ltaly and abroad. Mud, water, dirt, grease, blood, fatigue, night use, weak hand, limited space, trajectories, physical deficits, heat, cold, transportation, speed and much, much more...these are just some of the tests a good design must pass.

Here are some of the reasons for the WF4 Rough Wolf design.

1. Balance: it is fondamenlal that the center of gravity is shifted forward. beyond the heel, such that it decreases, i.e., saves energy when delivering the blow. one must always have the feeling that the knife falls forward.

2. Beating mass: 65% of the weight of the whole knife is between the first and second 3rd of the blade, giving maximum beating capacity in penetrating.

3. Cutting edge: due to the main core in the shape of an esse. the cutting edge is lower than the fingers of the handle, with the result that in the dynamics of the fendenle and biomechanics of the arm, the force expressed is never attenuated; especially never before the impact of the same on the object to be cut.

4. Blade height: compared to other blades, it has a significantly higher ability to dig holes.

s. Handling: excellent the ability to use the Wp4 for both coarse and precision work, this thanks to the ability to put the hand before the guard, giving absolute mastery of the blade despite its size. This is thanks to the large heel where the index finger can be inserted and the convenient thumb rest. It is also possible to do this while wearing tactical gloves.

6. Back: the inclination is reversed for 2 reasons; 1st to give forward beating mass, 2nd not to stress the wrist during use as chopping, a normal knife arrives at an angle on the object, devastating the point of impact being slight in thickness. This can only be avoided by straining the thumb-side wrist to tilt so that the back of the knife falls perpendicular on the object. The wp4 does not have this problem; it does not stress the wrist because the back of the blade already falls perpendicular to the object to be beaten.

7. Bevel: it is very high, has impressive penetration capacity.

8. Milling cutter: 5 millings placed on the blade plane for holding the knife with two hands when handling animal hides or for special uses during bushcrafting.

9. Grip: it is designed to decrease the possibility of losing the blade and avoid opening of the phalanges during pmlong use or in situations of prolonged physical deficit. Improved, anti-slip grip with internally concave Gauntlets to accommodate a Micro SurvivalKit.

As for the scabbard, I believe it is as important as the blade. I proceeded to design it and recommend its qualities; the main feature I wanted to put in designing it was the multi-positioning of the same: in particular, placing it at will on one's body or equipment facilitates the possibility of use.

This quality is particularly appreciated by military personnel, who are known to have special technical and logistical needs. For this purpose we have used in addition to Kydex the Keyblock closure, as well as the many holes along the perimeter; also safe for airdrop it has the possibility of use and positioning by both Right and Left handed operators.

PAUL BOZZO

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory

Intended use: Sports / EDC

Type of production: Industrial
Blade production: USA
Blade: 420HC stainless steel
Handle: G-10
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 112mm.
Total length: 190mm.
Closed thickness: 11mm.
Balancing: -
Weight: 122g.
Closure: Liner Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging:
Notes: Concave sharpening - opening via Carson Flipper system