Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.

In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

The Benchmade Anthem is one of the most daring and iconic knives ever made by the American brand. A “carte blanche” project, now out of production, it stands out for its integral monoblock titanium construction, high-level mechanical workmanship, and the best interpretation ever of the famous Axis Lock, redesigned here to ensure exceptional strength and fluidity. Elegant, slim, and surprisingly ergonomic, the Anthem is not just a knife, but a true statement of passion and engineering, designed for connoisseurs and collectors.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV steel 59/61HRC
Blade treatment: stonewashed
Handle: integral, bronze-colored anodized titanium
Blade length: 89mm.
Blade thickness: 2.85mm.
Closed length: 116mm.
Total length: 205mm.
Weight: 104g.
Closure: Axis Lock
Clip: Anodized titanium
Packaging: Cardboard box with Benchmade logos
Notes: knife out of production, previously purchased, from a private collection

KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available In production.
* Sharpening: Factory sharpened, perfect
* Marks on blade: None
* Marks on handle: Slight abrasion marks in contact surfaces between blade and titanium handle and on T-Latch block due to engagement of block and opening/closing of knife
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory


Intended use: sports/collection

Production Type: Industrial
Blade Production: USA
Blade: stainless steel CPM-S30V 58/60HRC
Blade treatment: satin finish
Handle: CNC-machined micro-bead-blasted titanium
Blade length: 112mm.
Blade thickness: 3.1mm.
Length closed: 139mm.
Total length: 254mm.
Weight: 149g.
Closure: T-latch
Sheath: Black nylon
Packaging: Cardboard box with Benchmade logos
Notes: previously purchased knife, overall in very good condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: knife from 1992 in perfect mechanical condition and excellent aesthetic condition, showing only a few small scratches on the steel heads
* Available on the market: Out of production and difficult to find, model marketed in the 1990s
* Sharpness: Factory sharp
* Marks on blade: none
* Marks on handle: very small scratches/hairlines on the steel heads
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

The Buck 551, often known as “King Charles II,” is a vintage folding knife produced in the United States between the early and mid-1990s in limited quantities.

Appreciated by collectors and enthusiasts of historic American knives, it is a more compact version than other Buck models from the same period, designed for everyday use but with careful workmanship and reliable materials. 

The 420HC stainless steel blade offers good edge retention and corrosion resistance, while the laminated wood scales with polished steel bolsters give it a classic, understated look that echoes the style of traditional Buck knives.

Intended use: EDC / Sports / Hunting

Type of production: industrial
Blade: 420HC stainless steel
Blade finish: Satin
Country of manufacture: USA
Handle: steel bolsters and laminated wood
Blade length: 70mm.
Blade thickness: 2mm.
Closed length: 98mm.
Overall length: 168mm.
Weight: 70g.
Locking system: Back lock
Clip: -
Packaging: -
Notes: vintage knife from 1992, previously purchased, from a private collection

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: In excellent condition, shows a scratch of about 2.5 cm on the blade
* Commercial Availability: Hard to find
* Sharpening: Factory edge, can be improved
* Blade Marks: shows a scratch of about 2.5 cm on the blade
* Handle Marks: -
* Box: -
* Sheath: in excellent condition, complete
* Manuals, Certificates and Warranties: -
Checked and Certified by our in-house workshop

The Buck 192 Vanguard is a premium-quality hunting knife, made in the USA and designed to deliver outstanding performance in all outdoor situations. The ergonomic handle made of fine wood with brass fittings gives the knife a classic and sturdy appearance, while the drop point blade in 420HC stainless steel ensures a reliable and long-lasting cut.

192 - with hyphen: this model features the marking “192-”, a production detail found on Buck knives made in the 1990s. This makes the knife particularly interesting for collectors and fans of the American brand.

Blade length: 102 mm
Total length: 216 mm
Blade material: 420HC stainless steel
Handle: fine wood with brass bolsters and scales
Sheath: high-quality brown leather
Production: Made in USA

This knife is ideal for hunting, hiking, camping, or as a collectible item. The Buck 192 Vanguard combines functionality, design, and reliability in a single tool appreciated worldwide.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and modified with aftermarket parts
* Condition: Like new
* Available on the market: Basic version available on the market
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

Customized and modified by the previous customer with various premium quality aftermarket parts, it comes with all the original accessories to restore it to the manufacturer's original specifications and includes all the packaging for the modifications made, listed below and already mounted on the knife:

MODIFICATIONS MADE (commercial value €125)
* LynchNW - Stubby Clip Stonewashed in 6AL-4V grade 5 titanium (commercial value €35)
* August Engineering - Titanium Hardware Kit Raw Black, titanium screws and spacers (commercial value €30)
* Flytanium - Premium Kit Canvas Micarta Scales (commercial value €41)
* Flytanium - Slotted Thumbstud Kit, titanium opening pin (market value €19)

Intended use: Sports/EDC

Type of production: Industrial
Country of production: USA
Blade: CPM-S30V steel 58/60HRC
Blade finish: Stonewashed
Modified handle: Premium Green Canvas Micarta by Flytanium with Raw Black titanium screws and spacers by August Engineering
Original handle: 6061-T6 aluminum with green anodization and purple anodized spacers (included)
Blade length: 74mm.
Blade thickness: 2.7mm.
Closed length: 97.5mm.
Total length: 172mm.
Closed thickness: 10mm.
Weight: 57g.
Lock: AXIS Lock
Modified clip: stonewashed titanium, deep pocket by LynchNW
Original clip: Removable and reversible, stainless steel 
Packaging: Cardboard box with Benchmade logos + Aftermarket product boxes and packaging
Notes: Previously purchased product from a private collection - Design by Warren Osborne

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: In excellent condition, never used, with some minor signs of wear
* Available on the market: Difficult to find
* Sharpness: Factory sharpness, could be improved
* Marks on blade: Some minor signs of wear
* Marks on handle: Some minor signs of wear
* Box: -
* Sheath: in excellent condition, complete
* Manuals, Certificates, and Warranties: -
Checked and Certified by our in-house laboratory

Created for survival, it became a legend.

The Randall Model 18 is much more than a knife: it is a symbol of resistance, ingenuity, and determination. Created to accompany military pilots on the most extreme missions, it has won over generations of adventurers, explorers, and collectors around the world. With its tubular handle and unmistakable battle design, it embodies the essence of true survival—where only reliability, strength, and the ability to adapt to any situation matter.

Today, as then, it is the perfect ally for those who are not satisfied with just any knife. For those looking for a faithful companion, ready for anything. For those who love to own a piece of history, hand-forged in the United States, still according to tradition.

A timeless icon, built to last a lifetime. And beyond.

Intended use: All-round utility/survival 

Type of production: Handcrafted
Country of production: Orlando, Florida, USA
Blade: 440B stainless steel at 57/59HRC
Blade finish: satin
Handle: tubular, stainless steel, with through guard and brass screw cap 
Blade length: 142mm.
Blade thickness: 6mm.
Total length: 264mm.
Weight: 345g.
Sheath: brown oiled leather, with belt loop, front button pocket, and sharpening stone
Notes: previously purchased knife, withdrawn from private collection, in excellent condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Mechanically perfect, with obvious signs of wear on the blade finish that do not compromise its practical use in any way 
* Available on the market: Introduced in 2001, now out of production
* Sharpening: Resharpened several times, professionally resharpened before being offered for sale
* Marks on blade: Multiple superficial cosmetic marks
* Marks on handle: a few small marks due to use
* Box: None
* Sheath: None
* Manuals, Certificates, and Warranties: None
* Checked and Certified by our in-house lab

Intended use: EDC / Light Utility

Type of production: Industrial
Country of production: USA
Blade: CPM-154CM stainless steel
Blade finish: Burnished
Handle: Aluminum
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 200mm.
Weight: 82g.
Closure: Axis Lock (Crossbar Lock)
Clip: Removable and reversible, in burnished stainless steel
Packaging: -
Notes: discontinued model no longer available on the market - knife previously purchased and used, from a private collection - mechanically perfect with obvious signs of wear that do not compromise its practical use in any way.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never removed from its original packaging
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

Built on a solid foundation, the redesigned Altitude takes ultralight hunting gear to new heights. This minimalist fixed blade features carbon fiber scales for better control of the CPM-S90V blade. This incredible ultralight cutting tool earns its place by your side thanks to its balance of corrosion resistance, strength, and edge retention.

Intended use: Hunting / Light Utility

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-S90V stainless steel (59/61HRC)
Blade treatment: Orange Cerakote
Handle: CPM-S90V stainless steel with carbon fiber scales
Blade length: 78mm.
Blade thickness: 2.3mm.
Overall length: 175mm.
Weight: 47g.
Sheath: Boltaron, can be worn around the neck or compatible with M.O.L.L.E. or UltiClip attachments 
Packaging: cardboard box with Benchmade logos
Notes: knife out of production, previously purchased, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, a couple of imperceptible marks on the inner folders, on the back of the knife.
* Commercially available: Commercially available.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: a couple of imperceptible marks on the inner folders, on the back of the knife
* Box: Present
* Scabbard: Microfiber bag.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Utility / Hiking / Tactical

Production Type: Industrial
Country of Production: USA
Blade: CPM-CRUWEAR 63/65HRC tool steel
Blade finish: Tungsten gray
Handle: G10 with PVD stainless steel folders
Blade length: 82.6mm.
Blade thickness: 3.6mm.
Length closed: 111mm.
Total length: 193mm.
Handle thickness: 16mm.
Weight: 130g.
Closure: AxisLock
Clip: Deep Pocket, removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos, microfiber pouch with Benchmade logos
Notes: previously purchased knife, from a private collection - high carbon steel blade, not stainless; wash and dry carefully after use and grease if storing

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, to be evaluated for potential resharpening.
* Commercially available: Discontinued
* Sharpening: Factory, still in good condition, but with small oxidation spots on the tip (can be easily removed by resharpening the knife, but we intentionally left the factory sharpening excellent)
* Marks on blade: A few imperceptible signs of use on the blade.
* Marks on handle: None
* Box: Present
* Scabbard: Microfiber bag.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: EDC/Gentleman

Production Type: Industrial
Country of Production: USA
Blade: Stainless Steel CPM-S30V 58/60HRC
Blade treatment: satin finish and stone washed
Handle: micarta
Blade length: 73mm.
Blade thickness: 2.3mm.
Length closed: 98mm.
Total length: 170mm.
Thickness when closed: 10mm
Weight: 66g.
Closure: SlipJoint (without blade lock)
Packaging: cardboard box with Benchmade logos
Notes: previously purchased knife, withdrawn from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Not present
* Scabbard: Microfiber pouch with Benchmade logos.
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory

The Benchmade Contego, discontinued in 2019, is a tactical folding knife that combines high-end performance and rugged design. This limited edition has a Black and Blue G10 handle and an M390 stainless steel blade, known for its exceptional edge retention and corrosion resistance, the Contego is ideal for those seeking a versatile and durable knife. With its ambidextrous AXIS locking mechanism, this knife is designed for reliability and comfort in any situation.

Intended Use: Tactical / Sporting / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel M390
Blade finish: satin-finished
Handle: G10
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 167g.
Closure: Axis Lock
Clip: Removable and reversible, satin-finished stainless steel
Sheath: microfiber pocket with Benchmade logos
Packaging: Without original packaging
Notes: special edition of Contego model, discontinued as of 2019, previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: 2015 specimen, like new
* Commercially available: Still in production
* Sharpening: Factory sharpened
* Marks on blade: No
* Marks on handle: None
* Box: Absent
* Scabbard: Present
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: All Rounder Utility

Production type: Industrial
Country of Production: USA
Blade: 420HC stainless steel engraved
Blade finish: mirror polish
Handle: wood and brass
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 220mm.
Thickness when closed: 16mm.
Weight: 205g.
Closure: Back Lock
Sheath: nylon sheath
Packaging: not present
Notes: previously purchased knife from private collection

Buck 560BT Black Nitride XLTi Titanium is a collectible folding knife manufactured in the United States in 1993. This distinctive model combines high-quality materials with functional design, making it a sought-after piece by both collectors and knife enthusiasts.

This item comes from a private collection and is in excellent condition, featuring a flawless blade and a perfectly preserved handle. Supplied with its original packaging and leather sheath, it represents a rare opportunity for true Buck aficionados.

Type: Previously Purchased
Condition: Excellent
Availability: Discontinued since the late '90s
Sharpening: Factory edge
Blade marks: None
Handle marks: None
Packaging: Complete, original cardboard box with manufacturer logos
Sheath: Cordura
Manuals, Certificates and Warranties: Warranty certificates included
Inspected and Certified: By our in-house lab

Intended use: Collection
Production type: Industrial
Country of manufacture: USA
Blade: 425M stainless steel
Blade finish: Black nitride
Handle: Titanium with black nitride finish
Blade length: 95 mm
Blade thickness: Not specified
Closed length: 107 mm
Total length: 219 mm
Closed thickness: Not specified
Weight: Not specified
Locking mechanism: Lockback
Clip: Not present; supplied with original Buck nylon sheath
Packaging: Original Buck box
Notes: Limited edition 1993; titanium handle with black nitride finish; includes original Buck nylon sheath

PREVIOUSLY PURCHASED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: knife previously purchased, withdrawn from a private collection.
* Condition: like new, never used
* Commercially available: discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Microfiber pouch.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Annually Benchmade releases a limited edition knife model under its Gold Class line. These Benchmade Gold Class knives are made from the finest materials and feature the highest level of workmanship. Each Benchmade Gold Class knife series is limited and numbered.

This particular Gold model, the 750-101, has Damasteel blade with Infinity pattern, bronze anodized monolock titanium handle with black carbon fiber inserts contoured and handcrafted, the titanium back spacer is also bronze anodized. All hardware components are finished with DLC (including the pocket clip). This Gold Class series is limited to 200 pieces.

Intended Use: Collection

Type of production: Semi-Industrial
Country of manufacture: USA
Blade: stainless Damasteel with Infinity design
Handle: bronze anodized titanium and carbon fiber
Blade length: 91mm.
Blade thickness: 3.18mm.
Length closed: 119mm.
Total length: 212mm.
Weight: 127g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: Black fabric pouch with Benchmade logos 
Packaging: “Gold Class” cardboard box with Benchmade logos - Rubberized steel case with magnetic closure - Warranty certificates with date and numbering
Notes: Limited Edition 2010, Knife number #133 out of #200 - each piece is numbered on the blade

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: USA
Blade: CPM-3V steel
Blade Finish: Gray Coated
Handle: Grivory
Blade length: 86mm.
Blade thickness: 2.3mm.
Length closed: 119mm.
Total length: 205mm.
Thickness when closed: 10.4mm.
Weight: 58.4g.
Locking system: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: previously purchased knife from a private collection

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: -
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: -
Inspected and certified by our internal laboratory

Drop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Deer wood and leather rings, and oiled leather sheath.

Intended use: hunting / light utility

Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: deer horn and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 275g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like new

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: Nylon pouch with zipper, with Randall Knives logos
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: Original warranty sheet
Inspected and certified by our internal laboratory

Drop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Desert Ironwood and leather, and oiled leather sheath.

Intended use: hunting / light utility

Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: Desert Ironwood and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 270g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like new - provided with Randall Knives zippered nylon pouch and paper warranty

Type: Previously purchased knife, from a private collection
Condition: Like new, never used
Commercial Availability: Discontinued
Edge: Factory edge
Blade Marks: None
Handle Marks: None
Box: Present
Sheath: -
Manuals, Certificates, and Warranties: Present
Inspected and Certified by our internal laboratory

Intended Use: Collection/Tactical
Type of Production: Semi-Industrial
Blade Production: USA
Blade: Stainless steel Damascus by Damasteel with Odin Heim pattern
Blade Treatment: -
Handle: Red and black carbon fiber with red anodized aluminum spacers
Blade Length: 90mm
Blade Thickness: 3.15mm
Closed Length: 119mm
Total Length: 210mm
Closed Thickness: -
Balance: -
Weight: 135g
Lock: Axis Lock
Clip: Removable and reversible, stainless steel
Sheath: Black fabric pouch with golden Benchmade logos
Packaging: "Gold Class" cardboard box with Benchmade logos - Rubber-coated steel case with magnetic closure
Notes: Limited Edition 2016, each piece is numbered on the blade

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of the box
* Commercially available: Still in catalog, but difficult to find.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Hunting/Light Utility

Production Type: Industrial
Country of Production: USA
Blade: stainless steel CPM-S35VN hardened by BOS
Blade finish: satin-finished
Handle: Micarta, with aluminum pommel and guard
Blade length: 152mm.
Blade thickness: 4.4mm.
Total length: 267mm.
Weight: 300g.
Scabbard: leather
Packaging: cardboard box with Buck logos
Notes: -

Exclusive product created in collaboration with the PDT YouTube channel - The Cutthroat's Park. This unique knife was actually used in a field test that you can view directly in this product sheet.

To make it even more special, we engraved Floriano's autograph and the PDT logo on the blade. The box of the knife was also autographed by Floriano making it a must-have collector's item.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: Floriano of the PDT Parchetto del Tagliagole.
* Condition: Overall in very good condition.
* Commercially available: Still in catalog.
* Sharpening: Factory sharpened, stropped by Floriano after use.
* Marks on blade: Small signs of concrete use.
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Utility / Hiking

Production Type: Industrial
Country of Production: USA
Blade: CPM-S30V 58/60HRC sintered stainless steel
Blade finish: Stonewash
Handle: G10
Blade length: 111mm.
Blade thickness: 4.2mm.
Total length: 229mm.
Weight: 218g.
Sheath: leather, with belt loop for vertical carry
Packaging: cardboard box with Benchmade logos
Notes: knife used in a YouTube video review by Floriano of PDT

The Model 26 Pathfinder is an excellent lightweight skinning and outdoor knife. The blade design favours both cutting and pointing work. This knife has become one of the most popular small hunting knives.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Good overall condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: Slight on the guard, the deer part is parts as new
* Packaging: -
* Scabbard: Original, leather, in good condition, some marks on the front
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: utility

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Deerskin
Blade length: 100mm.
Blade thickness: 4mm.
Total length: 215mm.
Balance: set back about 2cm from the guard
Weight: 124g. (206g. scabbard included)
Sheath: brown leather with belt loop
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in good condition.
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: Minimal marks on left cheek piece.
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: USA
Blade: steel CPM-20CV 59/61HRC
Blade finish: satin finish
Handle: Black G10
Blade length: 82mm.
Blade thickness: 3.5mm.
Length closed: 101mm.
Total length: 186mm.
Weight: 102g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Absent
Notes: Previously purchased knife from a private collection

The Model 16 was designed to meet the demand for an almost indestructible multi-purpose knife, including intensive use in salt water (careful cleaning and maintenance is however recommended). A special wax-impregnated sheath is included.

7″ (17.8cm) stainless steel blade with 6.5mm thickness. The top of the blade is slightly serrated to allow easy thumb placement. Black Micarta handle. Extra-heavy 7/8″ (2.2cm) wide tang that extends through a channel in the handle, securely fixed with epoxy. 

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased, manufactured in 2023
* Condition: Very good condition, like new
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in very good condition
* Manuals, Certificates and Warranties: - - * Checked and Certified by our in-house laboratory.
* Checked and certified by our in-house laboratory

Intended use: utility

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Micarta
Blade length: 178mm.
Blade thickness: 6.5mm.
Total length: 297mm.
Balance: on the guard
Weight: 362g. (522g. including scabbard)
Sheath: Brown leather with belt loop
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new
* Commercially available: found.
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

The Compadre Camp Knife is the perfect ally for those who love adventure. With its 5160 steel blade and cobalt coating, it cuts with precision and stands up to any challenge. The sturdy and stylish Micarta handle provides a secure grip, making it ideal for the outdoors.

Intended Use: Bushcraft / Outdoor

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, made of 5160 steel at 57/58HRC hardened by BOS
Blade finish: Cobalt Cerakote
Handle: Natural Canvas Micarta
Blade length: 114mm.
Blade thickness: 3.8mm.
Total length: 241mm.
Weight: 199g.
Sheath: black leather
Packaging: cardboard box with Buck logos
Notes: previously purchased knife from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: brand new
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present, complete kit
* Scabbard: Microfiber pouch.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended use: sports/collection

Production type: Industrial
Country of manufacture: USA
Blade: steel D2 60/62HRC
Blade finish: satin finish
Handle: G10 and titanium
Blade length: 108mm.
Blade thickness: 2.5mm.
Length closed: 137mm.
Total length: 237mm.
Thickness when closed: -
Balance: -
Weight: 94g.
Closure: T-latch
Clip: titanium
Packaging: cardboard box with Benchmade logos
Notes: knife withdrawn from private collection

This is a smaller version of Bo Randall's original knife, made in the Scagel knife style. 12.2 cm blade made of 4.5 mm thick stainless steel. This size and shape are popular with outdoor activity experts worldwide. It has a nickel silver guard and back cap and a handle made of authentic Indian deer antler. It weighs about 168 grams and comes with a brown leather sheath.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting/fishing

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: deerskin with through-guard and nickel silver tang
Blade length: 122mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Balance: backward
Weight: 168g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

The Model 27 is an ideal all-purpose sports knife. This knife has a stainless steel blade, 5mm blade thickness and 147mm length with concealed tang construction. The handle has nickel silver guard and pommel and a leather and walnut wood ring handle with black micarta and nickel silver spacers. 

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: made of leather and walnut wood rings with through-guard and nickel silver tang
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 262mm.
Balance: backward
Weight: 230g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: ergonomic, walnut wood with through-guard and brass tang
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 245mm.
Balance: backward
Weight: 290g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition.
* Commercially available: Discontinued since 2014
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present, with a few small signs of time.
* Sheath: Microfiber bag with Benchmade logos.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of Production: USA
Blade: made of CPM-S30V steel at 58-60HRC
Blade finish: satin-finished
Handle: anodized titanium
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 245mm.
Handle thickness: 12.5mm.
Weight: 189.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Like new
* Commercially available Discontinued since 2015
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of manufacture: USA
Blade: Bohler M390 60/62HRC stainless steel
Blade Finish: Stone Washed
Handle: G10 and Titanium
Blade length: 73.5mm
Blade thickness: 4.15mm.
Length closed: 96.5mm.
Total length: 175mm.
Thickness when closed: 15.5mm.
Weight: 156g.
Closure: Frame Lock
Clip: Titanium, machined from billet
Packaging: Cardboard box with Benchmade logos
Notes: Design by Shane Sibert

Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: A few small marks given by being placed in the sheath.
* Marks on handle: A few small marks on the duralumin pommel.
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of manufacture: USA
Blade: carbon steel O-1
Blade finish: satin finish
Handle: leather rings with brass through-guard and duralumin tang
Blade length: 118mm.
Blade thickness: 4.5mm.
Total length: 230mm.
Balance: backward
Weight: 210g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

This Model 19-4 Bushmaster from Randall Made Knives features a clip point blade with satin finish, false counterbore and serrated thumb rest. The handle consists of nickel silver through-guard and recoil pad with colored micarta spacers and monolithic curved deer antler grip. Includes original "Model A" leather sheath with belt loop and sharpening stone.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: deer antler with through-guard and nickel silver recoil pad
Blade length: 115mm.
Blade thickness: 5.5mm.
Total length: 228mm.
Balance: set back
Weight: 281g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

CUCHILLO DE COLECCIÓN PRIVADA
* Tipo: Comprado Anteriormente 
* Condición: Muy buen estado
* Afilado: Original
* Marcas en la hoja: Ninguna
* Marcas en el mango: Ninguna
* Embalaje: -
* Vaina: original, cuero, en muy buen estado
* Manuales, Certificados y Garantías: - - * Comprobado y certificado por nuestro laboratorio interno.
* Comprobado y certificado por nuestro laboratorio interno

El Randall Model 1 Fighter fue uno de los primeros modelos producidos en el taller de Randall en Orlando. Un Modelo 1, fabricado por el propio Bo Randall, sirvió como prototipo para la Springfield Randall que fue producida por la Northampton Cutlery Company cerca de Springfield, Massachusetts, en 1943 y 1944 para uso del ejército estadounidense.

Uso previsto: táctico / militar

Tipo de fabricación: artesanal
País de fabricación: USA
Hoja: espiga completa en acero inoxidable 440B
Acabado de la hoja: satinado
Empuñadura: protector pasante de latón y empuñadura monolítica de micarta
Longitud de la hoja: 177 mm.
Grosor de la hoja: 5mm.
Longitud total: 295mm.
Equilibrio: en la rama de la guarda
Peso: 350g.
Funda: cinturón, cuero negro
Notas: Cuchillo comprado anteriormente, retirado de colección privada

COUTEAU DE RETRAITE PROVENANT D'UNE COLLECTION PRIVÉE - Modèle Buck 120 datant des années 90
* Type : déjà acheté
* Etat : en excellent état, comme neuf
* Disponible dans le commerce : disponible dans le commerce dans les versions les plus récentes
* Affûtage : Original
* Marques sur la lame : non
* Marques sur le manche : non
* Boîte : sans boîte
* Gaine : gaine en cuir noir d'origine
* Manuels, certificats et garanties : -
* Contrôlé et certifié par notre laboratoire interne

Utilisation prévue : Tactique

Type de production : Industrielle
Production Lama : États-Unis
Lame : acier inoxydable 420HC
Traitement de la lame : -
Manche : en Polymères
Longueur de la lame : 185 mm.
Épaisseur de la lame : 4,5 mm.
Longueur fermée : -
Longueur totale : 300 mm.
Epaisse fermée : -
Équilibrage : -
Poids : 228 grammes.
Fermeture: -
Agrafe: -
Fourreau : en cuir noir
Emballage: -
Noter: -

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory

Intended use: Sports / EDC

Type of production: Industrial
Blade production: USA
Blade: 420HC stainless steel
Handle: G-10
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 112mm.
Total length: 190mm.
Closed thickness: 11mm.
Balancing: -
Weight: 122g.
Closure: Liner Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging:
Notes: Concave sharpening - opening via Carson Flipper system