Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: In excellent condition, never used, with some minor signs of wear
* Available on the market: Difficult to find
* Sharpness: Factory sharpness, could be improved
* Marks on blade: Some minor signs of wear
* Marks on handle: Some minor signs of wear
* Box: -
* Sheath: in excellent condition, complete
* Manuals, Certificates, and Warranties: -
Checked and Certified by our in-house laboratory

Created for survival, it became a legend.

The Randall Model 18 is much more than a knife: it is a symbol of resistance, ingenuity, and determination. Created to accompany military pilots on the most extreme missions, it has won over generations of adventurers, explorers, and collectors around the world. With its tubular handle and unmistakable battle design, it embodies the essence of true survival—where only reliability, strength, and the ability to adapt to any situation matter.

Today, as then, it is the perfect ally for those who are not satisfied with just any knife. For those looking for a faithful companion, ready for anything. For those who love to own a piece of history, hand-forged in the United States, still according to tradition.

A timeless icon, built to last a lifetime. And beyond.

Intended use: All-round utility/survival 

Type of production: Handcrafted
Country of production: Orlando, Florida, USA
Blade: 440B stainless steel at 57/59HRC
Blade finish: satin
Handle: tubular, stainless steel, with through guard and brass screw cap 
Blade length: 142mm.
Blade thickness: 6mm.
Total length: 264mm.
Weight: 345g.
Sheath: brown oiled leather, with belt loop, front button pocket, and sharpening stone
Notes: previously purchased knife, withdrawn from private collection, in excellent condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Overall in good condition, shows some minor cosmetic marks on the heat treatment of the titanium handles, clip, and blade, which do not compromise its practical use in any way
* Available on the market: Out of production and no longer available on the market
* Sharpness: Factory sharp
* Marks on blade: Minor cosmetic marks due to carrying and use
* Marks on handle: Minor cosmetic marks due to wear and tear
* Box: Knife sold in a nylon bag with EOS logos and a titanium key to adjust the blade tension
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

EOS Prawn – The first friction folder by EOS
The Prawn marks EOS's debut in the world of friction folders, offering a compact and robust solution for everyday use. Featuring a flamed titanium handle and CPM-S35VN sintered steel blade, it combines robustness and exclusive design.

Although it does not have a blade lock, the adjustable washer system allows you to keep the blade in the open or closed position by adjusting the tension. Its compact size makes it ideal for carrying in your pocket, backpack, or tactical bag.

Intended use: Tactical/EDC/Collection

Production type: Midtech
Country of manufacture: USA
Blade: CPM S35VN steel
Blade treatment: Stonewashed
Handle: Flamed titanium
Blade length: 68mm.
Blade thickness: 4mm.
Closed length: 83mm.
Total length: 135mm.
Closed thickness: 12mm.
Weight: 93g.
Closure: Friction Folder (without blade lock)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Notes: knife from a private collection, previously purchased and used, equipped with its original nylon pouch with which it was sold and a small titanium key to be used to adjust the tension and fluidity of the blade opening

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, has a small scratch on the G10 handle and a performing but improvable factory sharpening
* Commercially available: Still in production
* Sharpening: Factory, can be improved with subsequent resharpening
* Marks on blade: None
* Marks on handle: a small scratch on the G10 cheek piece.
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: G10 and stainless steel with aluminum spacer
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 108mm.
Total length: 182mm.
Weight: 102g.
Closure: FrameLock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: previously purchased knife from a private collection - Design by Jesper Voxnaes

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Still available.
* Sharpening: Factory sharpened
* Marks on blade: A few small, unnoticeable marks.
* Marks on handle: None
* Box: Not present
* Scabbard: -
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Sporting

Production Type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr14, 58-59 HRC
Blade Finish: Titanium Nitriding
Handle: G10
Blade length: 98mm.
Blade thickness: 3.5mm.
Length closed: 137mm.
Total length: 235mm.
Thickness when closed: 18mm.
Weight: 167g.
Closure: Liner Lock with additional AUTO-LAWKS automated safety lock.
Clip: multi-position, removable and reversible, stainless steel with black paint finish
Packaging: not present
Notes: previously purchased knife from a private collection

Intended use: Tactical/Military
Production type: Industrial
Country of production: Taiwan
Blade: AUS 4 steel, hardness 55–57 HRC
Blade finish: Bead Blast
Handle: Glass-fiber reinforced nylon with Desert Camo pattern
Blade length: 89mm
Blade thickness: 2.5mm
Closed length: 121mm
Total length: 210mm
Closed thickness: 11mm
Weight: 99g
Locking system: Liner Lock with AutoLAWKS system
Clip: Removable stainless steel
Packaging: NO BOX
Notes: Designed by Kit Carson

PREVIOUSLY PURCHASED KNIFE FROM A PRIVATE COLLECTION
* Type: Previously purchased knife.
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present, original, with some external abrasion
* Scabbard: Not present
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory.

The Hisshou, meaning “certain victory,” is the modern incarnation of the Samurai fighting sword. Designed by James Williams, it is a specialized tool intended for military personnel and special forces operators. James developed this design to meet the specific demands of coalition forces abroad, who needed a more powerful tactical tool than his already widely used Hissatsu from CRKT.

Historically, military swords have been designed according to the combat environment. Long swords, such as the English broadsword and the Japanese katana, were primarily used in open battlefields. Enclosed or confined combat required shorter swords, such as the sailor's machete and the Japanese wakizashi, close in size to the Hisshou.

Intended use: collection/tactical

Type of production: industrial
Country of production: China
Blade: Daido YK30 carbon steel (better known as O2 steel)
Blade treatment: Satin finish and mirror polish
Handle: Samekawa (Breed leather) and cotton weave
Blade length: 310mm.
Blade thickness: 6.5mm.
Total length: 465mm.
Balance: advanced
Weight: 470g.
Sheath: -
Packaging: wooden display case with manufacturer's logos
Notes: discontinued knife, previously purchased, from private collection

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: -
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: -
Inspected and certified by our internal laboratory

Drop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Deer wood and leather rings, and oiled leather sheath.

Intended use: hunting / light utility

Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: deer horn and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 275g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like new

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: Nylon pouch with zipper, with Randall Knives logos
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: Original warranty sheet
Inspected and certified by our internal laboratory

Drop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Desert Ironwood and leather, and oiled leather sheath.

Intended use: hunting / light utility

Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: Desert Ironwood and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 270g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like new - provided with Randall Knives zippered nylon pouch and paper warranty

The Model 26 Pathfinder is an excellent lightweight skinning and outdoor knife. The blade design favours both cutting and pointing work. This knife has become one of the most popular small hunting knives.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Good overall condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: Slight on the guard, the deer part is parts as new
* Packaging: -
* Scabbard: Original, leather, in good condition, some marks on the front
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: utility

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Deerskin
Blade length: 100mm.
Blade thickness: 4mm.
Total length: 215mm.
Balance: set back about 2cm from the guard
Weight: 124g. (206g. scabbard included)
Sheath: brown leather with belt loop
Notes: -

The Model 16 was designed to meet the demand for an almost indestructible multi-purpose knife, including intensive use in salt water (careful cleaning and maintenance is however recommended). A special wax-impregnated sheath is included.

7″ (17.8cm) stainless steel blade with 6.5mm thickness. The top of the blade is slightly serrated to allow easy thumb placement. Black Micarta handle. Extra-heavy 7/8″ (2.2cm) wide tang that extends through a channel in the handle, securely fixed with epoxy. 

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased, manufactured in 2023
* Condition: Very good condition, like new
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in very good condition
* Manuals, Certificates and Warranties: - - * Checked and Certified by our in-house laboratory.
* Checked and certified by our in-house laboratory

Intended use: utility

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Micarta
Blade length: 178mm.
Blade thickness: 6.5mm.
Total length: 297mm.
Balance: on the guard
Weight: 362g. (522g. including scabbard)
Sheath: Brown leather with belt loop
Notes: -

This is a smaller version of Bo Randall's original knife, made in the Scagel knife style. 12.2 cm blade made of 4.5 mm thick stainless steel. This size and shape are popular with outdoor activity experts worldwide. It has a nickel silver guard and back cap and a handle made of authentic Indian deer antler. It weighs about 168 grams and comes with a brown leather sheath.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting/fishing

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: deerskin with through-guard and nickel silver tang
Blade length: 122mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Balance: backward
Weight: 168g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

The Model 27 is an ideal all-purpose sports knife. This knife has a stainless steel blade, 5mm blade thickness and 147mm length with concealed tang construction. The handle has nickel silver guard and pommel and a leather and walnut wood ring handle with black micarta and nickel silver spacers. 

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: made of leather and walnut wood rings with through-guard and nickel silver tang
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 262mm.
Balance: backward
Weight: 230g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: ergonomic, walnut wood with through-guard and brass tang
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 245mm.
Balance: backward
Weight: 290g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: A few small marks given by being placed in the sheath.
* Marks on handle: A few small marks on the duralumin pommel.
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of manufacture: USA
Blade: carbon steel O-1
Blade finish: satin finish
Handle: leather rings with brass through-guard and duralumin tang
Blade length: 118mm.
Blade thickness: 4.5mm.
Total length: 230mm.
Balance: backward
Weight: 210g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

This Model 19-4 Bushmaster from Randall Made Knives features a clip point blade with satin finish, false counterbore and serrated thumb rest. The handle consists of nickel silver through-guard and recoil pad with colored micarta spacers and monolithic curved deer antler grip. Includes original "Model A" leather sheath with belt loop and sharpening stone.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: deer antler with through-guard and nickel silver recoil pad
Blade length: 115mm.
Blade thickness: 5.5mm.
Total length: 228mm.
Balance: set back
Weight: 281g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

CUCHILLO DE COLECCIÓN PRIVADA
* Tipo: Comprado Anteriormente 
* Condición: Muy buen estado
* Afilado: Original
* Marcas en la hoja: Ninguna
* Marcas en el mango: Ninguna
* Embalaje: -
* Vaina: original, cuero, en muy buen estado
* Manuales, Certificados y Garantías: - - * Comprobado y certificado por nuestro laboratorio interno.
* Comprobado y certificado por nuestro laboratorio interno

El Randall Model 1 Fighter fue uno de los primeros modelos producidos en el taller de Randall en Orlando. Un Modelo 1, fabricado por el propio Bo Randall, sirvió como prototipo para la Springfield Randall que fue producida por la Northampton Cutlery Company cerca de Springfield, Massachusetts, en 1943 y 1944 para uso del ejército estadounidense.

Uso previsto: táctico / militar

Tipo de fabricación: artesanal
País de fabricación: USA
Hoja: espiga completa en acero inoxidable 440B
Acabado de la hoja: satinado
Empuñadura: protector pasante de latón y empuñadura monolítica de micarta
Longitud de la hoja: 177 mm.
Grosor de la hoja: 5mm.
Longitud total: 295mm.
Equilibrio: en la rama de la guarda
Peso: 350g.
Funda: cinturón, cuero negro
Notas: Cuchillo comprado anteriormente, retirado de colección privada

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in excellent condition
* Commercially available: No
* Sharpening: Original
* Marks on blade: NO
* Signs on handle: NO
* Packaging: NO
* Sheath: in plastic material
* Manuals, Certificates and Guarantees: NO
* Checked and Certified by our internal laboratory

Blade: AUS-8 high-carbon 57/58HRC stainless steel
Handle: in cotton with stingray skin insert
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 290mm.
Weight: 322g.
Sheath: plastic material
Note:

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: Bolsters in G10 and White Bone
Blade Length: 79mm.
Blade thickness: 2.8mm.
Length closed: 98mm.
Total length: 178mm.
Weight: 100g.
Closure: liner lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: like new
* Commercially available: discontinued
* Sharpening: factory sharpened
* Marks on the blade: None
* Marks on the handle: None
* Box: Present
* Scabbard: /
* Manuals, certificates and warranties: Available
* Tested and certified by our in-house laboratory.

Intended Use: Sporting

Production Type: Industrial
Country of manufacture: China
Blade: Stainless steel 1.4116
Blade finish: Satin surface
Handle: GFN nylon
Blade length: 84 mm.
Blade thickness: 2.3 mm.
Length closed: 120 mm.
Total length: 203 mm.
Weight: 139 g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard box with CRKT logo
Notes: Ball bearing opening with IKBS system - Opening via Carson pinball system - Design by Ken Onion