Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE RETIRED FROM PRIVATE COLLECTION
* Origin: Retired from a private collection, previously purchased
* Condition: Perfect, Like new, NOS (new old stock)
* Available on the market: 2006 model, out of production
* Sharpness: Factory sharp, never used
* Marks on blade: None
* Marks on handle: None
* Box: Present and in perfect condition
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

The C70 A.T.R. (At The Ready) embodies the essence of a high-performance tactical folder. Awarded “Knife of the Year 2003” by Knives Illustrated, this model showcases the most advanced technological solutions developed by Spyderco.

The handle, precision-machined from a block of satin-finished stainless steel, is lightened by a series of holes that reduce weight and serve as tactile reference points for quick grip changes. The same holes are replicated on the contoured clip, ensuring balance and consistency in indexing.

The ends of the handle widen into a generous finger choil and a pinky rest, ensuring a stable grip in all conditions. The Compression Lock, fully integrated into the titanium scale, offers maximum strength and is rated for heavy-duty use and MBC applications.

The VG-10 blade, hollow-ground sharp, features a non-sharp swedge and a profile that combines a solid point with excellent penetration and cutting ability. Above the classic Spyderco hole is the Cobra Hood, which naturally guides the thumb during quick opening and acts as a control platform when the knife is in use.

The clip is configurable for both right and left tip-up carry thanks to the pre-drilled holes.

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade finish: satin
Handle: satin stainless steel
Blade length: 87mm.
Blade thickness: 3 mm.
Closed length: 129 mm.
Total length: 216 mm.
Weight: 150g.
Closure: Compression Lock
Clip: polished stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife from a private collection - NOS (new old stock) in perfect condition, absolutely like new, without even a scratch or sign of use

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: In excellent condition, a couple of visible scratches on the blade caused by rotation when opening and closing the handle and two very small dents in the steel head of the handle
* Available on the market: Out of production and difficult to find, only marketed from 2003 to 2005
* Sharpness: Factory sharp
* Marks on blade: a couple of visible scratches on the blade caused by rotation when opening and closing the handle
* Marks on handle: two tiny dents in the steel head of the handle
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Ed Schempp, a wheat farmer, metallurgist, and renowned knife maker, created the Persian Folder by blending classic Western elegance with exotic Eastern charm. Traditionally, Persian knives are fixed, but Ed reinterpreted this typical shape in a folding knife.

Characterized by curved and harmonious lines, the Persian Folder 90 mm stands out for its black Micarta scales combined with polished stainless steel guards. The handle features a series of finger choils that allow for a firm grip and total control of the blade. The blade, inspired by the East, has a pronounced belly and an elegant upward-pointing tip.

Made of high-performance VG-10 steel with a concave grind, the blade measures 89 mm and features a prominent “hump” above the opening hole, ideal as a thumb rest. The clip allows for right-side tip-up pocket carry. A milling on the locking mechanism, known as the David Boye Dent, increases safety by preventing accidental unlocking during a firm grip.

Intended use: Fighter / EDC

Type of production: industrial
Blade: VG10 stainless steel
Blade finish: Satin
Country of manufacture: Japan
Handle: Micarta and stainless steel
Blade length: 89 mm.
Blade thickness: 3 mm.
Closed length: 121 mm.
Total length: 210 mm.
Weight: 154 g.
Locking system: Back lock
Clip: removable, stainless steel with black coating
Packaging: Cardboard box with Spyderco logos
Notes: knife from a private collection, previously purchased

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: New
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S30V
Blade Finish: Satin finish
Handle: Carbon Fiber and G10 Laminate
Blade Length: 88mm.
Blade thickness: 3.5mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 94g.
Closure: Compression Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Commercially available Discontinued, remained on the market from 2013 to 2017.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small abrasion marks on the clip.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Satin finish
Handle: Titanium and Carbon Fiber laminated Cubic Check
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 116mm.
Total length: 195mm.
Weight: 119g.
Closure: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multiposition and removable, stainless steel
Notes: Previously purchased knife from a private collection - Design by Eric Glesser - Opening via patented Carson Flipper system - Pivot on ball bearings

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Overall in good
* Commercially available: Discontinued in 2017.
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small signs of wear and tear.
* Marks on handle: None
* Box: Present and original
* Scabbard: Present and original, modified for belt carry.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Sporting / Neckwear

Production Type: Industrial
Country of Production: Japan
Blade: full tang, Stainless steel VG-10
Blade finish: satin finish
Handle: Micarta
Blade length: 85mm.
Blade thickness: 4mm.
Total length: 181mm.
Weight: 148g.
Sheath: Neck, boltaron, with possibility of Tek-Lok or MOLLE type attachments
Packaging: Cardboard box with Spyderco logos.
Notes: Design by Fred Perrin - Discontinued item, previously purchased, from private collection - Supplied with two removable attachments for belt carry

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Discontinued as of 2019
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, but without label and with signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: No
* Checked and certified by our internal laboratory

Intended use: Sporting

Type of production: industrial
Blade: stainless steel VG-10
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 94mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 213mm.
Weight: 115g.
Closure: Back Lock
Clip: Removable, double positioning, stainless steel
Notes: Version remained in production approximately from 2004 to 2019 - specimen withdrawn from private collection, overall in good condition. Equipped with retractable glass breaker and whistle integrated in the handle.

Knife withdrawn from private collection - model now discontinued and no longer available - 83mm blade "small" version - overall in excellent condition, shows no signs of wear or use - factory sharpening in perfect condition - no packaging - checked and certified by our in-house laboratory.

Intended Use: Sporting / EDC

Type of production: Industrial
Country of manufacture: USA
Blade: Stainless steel CPM-S30V
Blade finish: satin finish
Handle: G-10 with stainless steel liners
Blade length: 83mm.
Blade thickness: 3.5mm.
Length closed: 117mm.
Total length: 201mm.
Weight: 155g.
Closure: Back Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: discontinued knife - withdrawn from private collection, overall in very good condition

Knife withdrawn from a private collection - Model discontinued by WE KNIFE - Like new condition, with original packaging - Checked, certified by our internal laboratory Collini Cutlery

Intended use: Sports / Collection

Type of production: Industrial
Country of production: China
Blade: CPM-S35VN 59 / 61HRC stainless steel
Blade treatment: dual tone, satin & black PVD
Handle: 6AL4V titanium machined with numerical control
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 114g.
Closing: Framelock
Clip: 6AL4V titanium
Packaging: cardboard box with We Knife Co. logos
Notes: Carson Flipper opening system on ceramic ball bearings