Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.

In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collection

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private seller, previously purchased
* Condition: In excellent mechanical condition - good cosmetic condition
* Commercially available: Discontinued
* Sharpening: Professionally resharpened
* Marks on blade: Several signs of oxidation on the blade and minor abrasions, which do not compromise its practical use
* Marks on handle: None
* Box: Missing
* Sheath: In excellent condition
* Manuals, Certificates, and Warranties: None
* Inspected and certified by our in-house laboratory

Intended Use: Tactical

Manufacturing Type: Industrial
Country of Manufacture: USA
Blade: Full tang, CPM-S30V steel
Blade Finish: Tungsten DLC
Handle: G-10 with 3D machining
Blade length: 105 mm.
Blade thickness: 4.5 mm.
Overall length: 205 mm.
Balance: 1.5 cm rearward
Weight: 264 g.
Sheath: thermoformed Kydex
Notes: designed by Mick Strider

KNIFE FROM A PRIVATE COLLECTION
* Origin: Previously purchased knife from a private collection
* Condition: 2008 model, overall in excellent condition
* Commercial Availability: Discontinued
* Sharpness: Factory-sharpened, could be improved
* Blade Condition: Minor cosmetic marks on the DLC finish due to age
* Handle Condition: None
* Box: -
* Sheath: Included
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The Zero Tolerance 0100 is one of the first knives produced by Zero Tolerance, the premium division of Kai USA, which was launched in 2006 to develop professional tools for military personnel, law enforcement, and first responders. The 0100 model was, in fact, one of the first three fixed-blade knives in the original lineup, alongside the 0121 and 0150 models.

The design bears the unmistakable stylistic signature of Ken Onion, the renowned American designer already responsible for numerous successes at Kershaw. The distinctive “S”-curved blade offers an unusual combination of cutting ability, power, and precision, making the ZT0100 suitable for both tactical applications and the most demanding outdoor use.

For its construction, Zero Tolerance chose CPM 3V, a steel then considered cutting-edge for its strength and impact resistance, paired with a tungsten DLC coating and three-dimensionally machined G-10 scales. This combination helped solidify the brand’s early reputation as a manufacturer of “overbuilt” knives, designed without compromise for field use.

Today, the ZT 0100 is a discontinued model particularly prized by collectors, as it is considered one of the knives that helped define the Zero Tolerance brand’s identity in its early years.

Intended Use: Tactical / Sporting / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Full tang, CPM-3V carbon steel
Blade Finish: Tungsten DLC coating
Handle: G10
Blade Length: 146mm.
Blade thickness: 4.8 mm.
Overall length: 267 mm.
Weight: 317 g.
Sheath: Nylon, belt-mounted, with thermoformed Kydex lining
Packaging: -
Notes: Previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Like new, never used, no packaging
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Tigerstripe black-oxide BlackWash
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: knife previously purchased and used, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: knife from 1992 in perfect mechanical condition and excellent aesthetic condition, showing only a few small scratches on the steel heads
* Available on the market: Out of production and difficult to find, model marketed in the 1990s
* Sharpness: Factory sharp
* Marks on blade: none
* Marks on handle: very small scratches/hairlines on the steel heads
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

The Buck 551, often known as “King Charles II,” is a vintage folding knife produced in the United States between the early and mid-1990s in limited quantities.

Appreciated by collectors and enthusiasts of historic American knives, it is a more compact version than other Buck models from the same period, designed for everyday use but with careful workmanship and reliable materials. 

The 420HC stainless steel blade offers good edge retention and corrosion resistance, while the laminated wood scales with polished steel bolsters give it a classic, understated look that echoes the style of traditional Buck knives.

Intended use: EDC / Sports / Hunting

Type of production: industrial
Blade: 420HC stainless steel
Blade finish: Satin
Country of manufacture: USA
Handle: steel bolsters and laminated wood
Blade length: 70mm.
Blade thickness: 2mm.
Closed length: 98mm.
Overall length: 168mm.
Weight: 70g.
Locking system: Back lock
Clip: -
Packaging: -
Notes: vintage knife from 1992, previously purchased, from a private collection

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: In excellent condition, shows a scratch of about 2.5 cm on the blade
* Commercial Availability: Hard to find
* Sharpening: Factory edge, can be improved
* Blade Marks: shows a scratch of about 2.5 cm on the blade
* Handle Marks: -
* Box: -
* Sheath: in excellent condition, complete
* Manuals, Certificates and Warranties: -
Checked and Certified by our in-house workshop

The Buck 192 Vanguard is a premium-quality hunting knife, made in the USA and designed to deliver outstanding performance in all outdoor situations. The ergonomic handle made of fine wood with brass fittings gives the knife a classic and sturdy appearance, while the drop point blade in 420HC stainless steel ensures a reliable and long-lasting cut.

192 - with hyphen: this model features the marking “192-”, a production detail found on Buck knives made in the 1990s. This makes the knife particularly interesting for collectors and fans of the American brand.

Blade length: 102 mm
Total length: 216 mm
Blade material: 420HC stainless steel
Handle: fine wood with brass bolsters and scales
Sheath: high-quality brown leather
Production: Made in USA

This knife is ideal for hunting, hiking, camping, or as a collectible item. The Buck 192 Vanguard combines functionality, design, and reliability in a single tool appreciated worldwide.

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: In excellent condition, never used, with some minor signs of wear
* Available on the market: Difficult to find
* Sharpness: Factory sharpness, could be improved
* Marks on blade: Some minor signs of wear
* Marks on handle: Some minor signs of wear
* Box: -
* Sheath: in excellent condition, complete
* Manuals, Certificates, and Warranties: -
Checked and Certified by our in-house laboratory

Created for survival, it became a legend.

The Randall Model 18 is much more than a knife: it is a symbol of resistance, ingenuity, and determination. Created to accompany military pilots on the most extreme missions, it has won over generations of adventurers, explorers, and collectors around the world. With its tubular handle and unmistakable battle design, it embodies the essence of true survival—where only reliability, strength, and the ability to adapt to any situation matter.

Today, as then, it is the perfect ally for those who are not satisfied with just any knife. For those looking for a faithful companion, ready for anything. For those who love to own a piece of history, hand-forged in the United States, still according to tradition.

A timeless icon, built to last a lifetime. And beyond.

Intended use: All-round utility/survival 

Type of production: Handcrafted
Country of production: Orlando, Florida, USA
Blade: 440B stainless steel at 57/59HRC
Blade finish: satin
Handle: tubular, stainless steel, with through guard and brass screw cap 
Blade length: 142mm.
Blade thickness: 6mm.
Total length: 264mm.
Weight: 345g.
Sheath: brown oiled leather, with belt loop, front button pocket, and sharpening stone
Notes: previously purchased knife, withdrawn from private collection, in excellent condition

Intended use: Sport/Collection
Production type: Industrial cutting - artisanal assembly and finishing
Country of manufacture: Japan
Blade: SanMai steel with VG-10 stainless core (59/60HRC) and 33-layer nickel Damascus outer cheeks
Blade finish: Damascus
Handle: Pakkawood
Blade length: 70mm
Blade thickness: 3mm
Closed length: 95mm
Total length: 167mm
Weight: 66g
Locking mechanism: Liner Lock
Packaging: Fabric bag
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: 2015 specimen, like new
* Commercially available: Still in production
* Sharpening: Factory sharpened
* Marks on blade: No
* Marks on handle: None
* Box: Absent
* Scabbard: Present
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: All Rounder Utility

Production type: Industrial
Country of Production: USA
Blade: 420HC stainless steel engraved
Blade finish: mirror polish
Handle: wood and brass
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 220mm.
Thickness when closed: 16mm.
Weight: 205g.
Closure: Back Lock
Sheath: nylon sheath
Packaging: not present
Notes: previously purchased knife from private collection

Buck 560BT Black Nitride XLTi Titanium is a collectible folding knife manufactured in the United States in 1993. This distinctive model combines high-quality materials with functional design, making it a sought-after piece by both collectors and knife enthusiasts.

This item comes from a private collection and is in excellent condition, featuring a flawless blade and a perfectly preserved handle. Supplied with its original packaging and leather sheath, it represents a rare opportunity for true Buck aficionados.

Type: Previously Purchased
Condition: Excellent
Availability: Discontinued since the late '90s
Sharpening: Factory edge
Blade marks: None
Handle marks: None
Packaging: Complete, original cardboard box with manufacturer logos
Sheath: Cordura
Manuals, Certificates and Warranties: Warranty certificates included
Inspected and Certified: By our in-house lab

Intended use: Collection
Production type: Industrial
Country of manufacture: USA
Blade: 425M stainless steel
Blade finish: Black nitride
Handle: Titanium with black nitride finish
Blade length: 95 mm
Blade thickness: Not specified
Closed length: 107 mm
Total length: 219 mm
Closed thickness: Not specified
Weight: Not specified
Locking mechanism: Lockback
Clip: Not present; supplied with original Buck nylon sheath
Packaging: Original Buck box
Notes: Limited edition 1993; titanium handle with black nitride finish; includes original Buck nylon sheath

Knife withdrawn from a private collection

• Origin: Withdrawn from a private owner, previously purchased and used
• Condition: Like new
• Availability: Discontinued
• Factory edge: Yes
• Blade marks: None
• Handle marks: None
• Box: Not included
• Sheath: Not included
• Manuals, Certificates, and Warranties: Not included
• Inspected and certified by our internal laboratory

One of our first ZT models and still one of the most popular, now offered in a limited edition with a CPM-MagnaCut steel blade.

The 0350 is a large and aggressive knife, yet compact and light enough to make it a practical and highly effective EDC. It features ZT's assisted opening system: the blade deploys quickly and easily, even with gloves, thanks to the ambidextrous flipper. The blade is finished with a bold and distinctive tiger-stripe pattern created with tungsten DLC coating.

Intended use: Tactical / Military

• Production type: Industrial
• Country of origin: USA
• Blade material: CPM-MagnaCut steel
• Blade finish: Tungsten DLC Coating
• Handle: G-10
• Blade length: 90mm
• Blade thickness: 3mm
• Closed length: 115mm
• Overall length: 195mm
• Closed thickness: 13mm
• Weight: 162g
• Locking mechanism: Liner Lock
• Clip: Removable, multi-position, stainless steel
• Packaging: Not included
• Notes: Sprint Run edition with CPM-MagnaCut steel - Design by Mick Strider and Ken Onion - SpeedSafe opening system

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: -
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: -
Inspected and certified by our internal laboratory

Drop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Deer wood and leather rings, and oiled leather sheath.

Intended use: hunting / light utility

Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: deer horn and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 275g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like new

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: Nylon pouch with zipper, with Randall Knives logos
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: Original warranty sheet
Inspected and certified by our internal laboratory

Drop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Desert Ironwood and leather, and oiled leather sheath.

Intended use: hunting / light utility

Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: Desert Ironwood and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 270g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like new - provided with Randall Knives zippered nylon pouch and paper warranty

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of the box
* Commercially available: Still in catalog, but difficult to find.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Hunting/Light Utility

Production Type: Industrial
Country of Production: USA
Blade: stainless steel CPM-S35VN hardened by BOS
Blade finish: satin-finished
Handle: Micarta, with aluminum pommel and guard
Blade length: 152mm.
Blade thickness: 4.4mm.
Total length: 267mm.
Weight: 300g.
Scabbard: leather
Packaging: cardboard box with Buck logos
Notes: -

Exclusive product created in collaboration with the PDT YouTube channel - The Cutthroat's Park. This unique knife was actually used in a field test that you can view directly in this product sheet.

To make it even more special, we engraved Floriano's autograph and the PDT logo on the blade. The box of the knife was also autographed by Floriano making it a must-have collector's item.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: Floriano of the PDT Parchetto del Tagliagole.
* Condition: Overall in good condition.
* Commercially available: Still in catalog.
* Sharpening: Factory sharpened, stropped by Floriano after use.
* Marks on blade: Signs of concrete use on blade finish.
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: USA
Blade: full tang in CPM-3V steel
Blade treatment: Microbead blasting and Cerakote
Handle: G10 with stainless steel guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex
Packaging: cardboard box with ZT logos.
Notes: knife used in a YouTube video review by Floriano of PDT

The Model 26 Pathfinder is an excellent lightweight skinning and outdoor knife. The blade design favours both cutting and pointing work. This knife has become one of the most popular small hunting knives.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Good overall condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: Slight on the guard, the deer part is parts as new
* Packaging: -
* Scabbard: Original, leather, in good condition, some marks on the front
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: utility

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Deerskin
Blade length: 100mm.
Blade thickness: 4mm.
Total length: 215mm.
Balance: set back about 2cm from the guard
Weight: 124g. (206g. scabbard included)
Sheath: brown leather with belt loop
Notes: -

The Model 16 was designed to meet the demand for an almost indestructible multi-purpose knife, including intensive use in salt water (careful cleaning and maintenance is however recommended). A special wax-impregnated sheath is included.

7″ (17.8cm) stainless steel blade with 6.5mm thickness. The top of the blade is slightly serrated to allow easy thumb placement. Black Micarta handle. Extra-heavy 7/8″ (2.2cm) wide tang that extends through a channel in the handle, securely fixed with epoxy. 

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased, manufactured in 2023
* Condition: Very good condition, like new
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in very good condition
* Manuals, Certificates and Warranties: - - * Checked and Certified by our in-house laboratory.
* Checked and certified by our in-house laboratory

Intended use: utility

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Micarta
Blade length: 178mm.
Blade thickness: 6.5mm.
Total length: 297mm.
Balance: on the guard
Weight: 362g. (522g. including scabbard)
Sheath: Brown leather with belt loop
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, minor marks on clip and hardware.
* Commercially available: Discontinued
* Sharpening: Factory sharpened, can be improved.
* Marks on blade: None
* Marks on handle: Small marks on clip and hardware.
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: / /
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Sporting

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel S35VN
Blade finish: Satin finish
Handle: G10 and Titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Total length: 216mm.
Thickness when closed: 13mm.
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Packaging: not present
Notes: previously purchased knife from a private collection - made in collaboration with Emerson Knives - Patented Wave opening system

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new
* Commercially available: found.
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

The Compadre Camp Knife is the perfect ally for those who love adventure. With its 5160 steel blade and cobalt coating, it cuts with precision and stands up to any challenge. The sturdy and stylish Micarta handle provides a secure grip, making it ideal for the outdoors.

Intended Use: Bushcraft / Outdoor

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, made of 5160 steel at 57/58HRC hardened by BOS
Blade finish: Cobalt Cerakote
Handle: Natural Canvas Micarta
Blade length: 114mm.
Blade thickness: 3.8mm.
Total length: 241mm.
Weight: 199g.
Sheath: black leather
Packaging: cardboard box with Buck logos
Notes: previously purchased knife from private collection

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION

* Origin: Withdrawn from a private individual, previously purchased
* Condition: like new
* Commercially available: no longer in production
* Sharpening: original
* Marks on blade: -
* Marks on handle: -
* Box: NO
* Sheath: NO
* Manuals, Certificates and Guarantees: NO
* Checked and Certified by our internal laboratory

Intended use: Tactical/Military

Type of production: Industrial
Blade production: USA
Blade: CTS204P stainless steel
Blade treatment: -
Handle: Carbon Fiber and Titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Total length: 216mm.
Thickness when closed: 13mm.
Balance: -
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, in stainless steel
Sheath: -
Packaging: cardboard box with Zero Tolerance logos
Notes: in collaboration with Emerson Knives - Patented Wave opening system

This is a smaller version of Bo Randall's original knife, made in the Scagel knife style. 12.2 cm blade made of 4.5 mm thick stainless steel. This size and shape are popular with outdoor activity experts worldwide. It has a nickel silver guard and back cap and a handle made of authentic Indian deer antler. It weighs about 168 grams and comes with a brown leather sheath.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting/fishing

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: deerskin with through-guard and nickel silver tang
Blade length: 122mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Balance: backward
Weight: 168g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

The Model 27 is an ideal all-purpose sports knife. This knife has a stainless steel blade, 5mm blade thickness and 147mm length with concealed tang construction. The handle has nickel silver guard and pommel and a leather and walnut wood ring handle with black micarta and nickel silver spacers. 

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: made of leather and walnut wood rings with through-guard and nickel silver tang
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 262mm.
Balance: backward
Weight: 230g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: ergonomic, walnut wood with through-guard and brass tang
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 245mm.
Balance: backward
Weight: 290g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: A few small marks given by being placed in the sheath.
* Marks on handle: A few small marks on the duralumin pommel.
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of manufacture: USA
Blade: carbon steel O-1
Blade finish: satin finish
Handle: leather rings with brass through-guard and duralumin tang
Blade length: 118mm.
Blade thickness: 4.5mm.
Total length: 230mm.
Balance: backward
Weight: 210g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

This Model 19-4 Bushmaster from Randall Made Knives features a clip point blade with satin finish, false counterbore and serrated thumb rest. The handle consists of nickel silver through-guard and recoil pad with colored micarta spacers and monolithic curved deer antler grip. Includes original "Model A" leather sheath with belt loop and sharpening stone.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: deer antler with through-guard and nickel silver recoil pad
Blade length: 115mm.
Blade thickness: 5.5mm.
Total length: 228mm.
Balance: set back
Weight: 281g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

CUCHILLO DE COLECCIÓN PRIVADA
* Tipo: Comprado Anteriormente 
* Condición: Muy buen estado
* Afilado: Original
* Marcas en la hoja: Ninguna
* Marcas en el mango: Ninguna
* Embalaje: -
* Vaina: original, cuero, en muy buen estado
* Manuales, Certificados y Garantías: - - * Comprobado y certificado por nuestro laboratorio interno.
* Comprobado y certificado por nuestro laboratorio interno

El Randall Model 1 Fighter fue uno de los primeros modelos producidos en el taller de Randall en Orlando. Un Modelo 1, fabricado por el propio Bo Randall, sirvió como prototipo para la Springfield Randall que fue producida por la Northampton Cutlery Company cerca de Springfield, Massachusetts, en 1943 y 1944 para uso del ejército estadounidense.

Uso previsto: táctico / militar

Tipo de fabricación: artesanal
País de fabricación: USA
Hoja: espiga completa en acero inoxidable 440B
Acabado de la hoja: satinado
Empuñadura: protector pasante de latón y empuñadura monolítica de micarta
Longitud de la hoja: 177 mm.
Grosor de la hoja: 5mm.
Longitud total: 295mm.
Equilibrio: en la rama de la guarda
Peso: 350g.
Funda: cinturón, cuero negro
Notas: Cuchillo comprado anteriormente, retirado de colección privada

COUTEAU DE RETRAITE PROVENANT D'UNE COLLECTION PRIVÉE - Modèle Buck 120 datant des années 90
* Type : déjà acheté
* Etat : en excellent état, comme neuf
* Disponible dans le commerce : disponible dans le commerce dans les versions les plus récentes
* Affûtage : Original
* Marques sur la lame : non
* Marques sur le manche : non
* Boîte : sans boîte
* Gaine : gaine en cuir noir d'origine
* Manuels, certificats et garanties : -
* Contrôlé et certifié par notre laboratoire interne

Utilisation prévue : Tactique

Type de production : Industrielle
Production Lama : États-Unis
Lame : acier inoxydable 420HC
Traitement de la lame : -
Manche : en Polymères
Longueur de la lame : 185 mm.
Épaisseur de la lame : 4,5 mm.
Longueur fermée : -
Longueur totale : 300 mm.
Epaisse fermée : -
Équilibrage : -
Poids : 228 grammes.
Fermeture: -
Agrafe: -
Fourreau : en cuir noir
Emballage: -
Noter: -

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Commercially available: discontinued
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original ZT box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: USA
Blade: CTS-204P stainless steel
Blade treatment: stone washed and satin finish
Handle: Titanium with anodized spacers
Blade length: 87mm.
Blade thickness: 4mm.
Closed length: 112mm.
Total length: 193mm.
Thick when closed: 14mm.
Weight: 178g.
Closure: Framelock
Clip: Removable, reversible, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmirty Sinkevich - KVT opening on ball bearings

Knife withdrawn from a private collection in excellent condition, uniquely has a small imperfection on the wood at the base of the handle (visible in the close up of the photos) - Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.

The SHINRA MAXIMA series uses the sintered and cryogenically hardened Japanese steel SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Production Lama: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka Wood
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can visit the website: www.collinisteel.com

Knife from a private collection - Iconic and sought after model designed by Ken Onion and Mick Strider - Out of production and no longer available - Perfect in all, like new, serial 1544, does not have any kind of sign or defect - The knife shows an uncertainty at the tip, on the sharpening, which is slightly different; presumably already produced in this way by ZT - The sharpening is good and shows no signs of wear, presumably the sharpening is the original factory - Accompanied by original Zero Tolerance box, but referred to the model 0301 with green G10 handle - Checked and certified by our internal laboratory

Intended Use: Collection / Tactical / Military

Production type: Industrial
Country of Production: USA
Blade: Steel CPM-S30V
Blade Finish: Tigerstripe - Tungsten DLC Coating
Handle: Titanium and G-10 with 3D finish
Blade Length: 95mm.
Blade thickness: 4mm.
Length closed: 133mm.
Total length: 218mm.
Thickness when closed: 17mm.
Weight: 232g.
Closure: Frame Lock
Clip: Removable, Multiposition, Stainless Steel
Package: Cardboard box with Zero Tolerance logos (the box refers to a different model, 0301)
Notes: Design by Mick Strider and Ken Onion - SpeedSafe opening system - Like new - Retired from prvated collection

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory

Intended use: Sports / EDC

Type of production: Industrial
Blade production: USA
Blade: 420HC stainless steel
Handle: G-10
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 112mm.
Total length: 190mm.
Closed thickness: 11mm.
Balancing: -
Weight: 122g.
Closure: Liner Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging:
Notes: Concave sharpening - opening via Carson Flipper system