training knives
-
Boker Plus - Papillon Trainer Bali - 01BO352 - training knife
Intended Use: Training
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 420
Blade Finish: Stonewashed
Handle: Stainless steel
Blade Length: 114mm.
Blade thickness: 3.7mm.
Length closed: 138mm.
Total length: 252mm.
Weight: 124g.
Closure: T-latch
Clip: -
Package: Cardboard box with Boker Plus logos
Notes: -BO-01BO352 -
Fox - Dart Tanto Karambit Training by Doug Marcaida - FX-597TK - knife
Fox - Dart Tanto Karambit Training by Doug Marcaida - FX-597TK - knife
Intended use: Tactical Training
Type of production: Industrial
Production Lama: Italy
Blade: stainless steel 420 with tip and rounded blade
Blade treatment: -
Handle: G-10
Blade length: 64mm.
Blade thickness: 3mm.
Closed Length: 120mm.
Overall length: 185mm.
Thick when closed: -
Balancing: -
Weight: 104g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Fox FKMD
Notes: Developed by Doug Marcaida and Lad Mandiola - Opening Wave by EmersonFX-597TK -
Kershaw - Emerson E-Train Framelock - 6034T - knife
Intended use: Tactical / EDC
Type of production: industrial
Blade: 8Cr14MoV stainless steel
Treatment Lama: -
Production Lama: China
Handle: Stainless steel and G10
Blade length: 83mm.
Blade Thickness: 3mm.
Closed Length: 114mm.
Overall length: 197mm.
Balancing: -
Weight: 144g.
Closure: Frame Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Design by Ernie EmersonK6034TR -
Fox - FX-599TK G10 Karambit Training Orange - Knife Training
Fox - FX-599TK G10 Karambit Training Orange - Knife Training
Blade: rounded and not sharp, stainless steel 420
Handle: G10 Orange
Ring: Aluminium Black
Lock: Liner Lock
Length closed: 120 mm.
Blade length: 60 mm.
Blade thickness: 3.5 mm
Overall length: 175 mm
Weight: 102 g.
Clip: Stainless SteelFX-599TK -
Mac Coltellerie - 630 Training Knife - training knife
Intended use: training knife with rounded edge and tip
Type of production: industrial
Blade: stainless steel W 1.4028 - 55-56HRC
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 160mm.
Blade thickness: 4mm.
Total length: 290mm.
Balancing: advanced to 1cm from the guard branch
Weight: 296g. (378g. With scabbard)
sheath: in ABS
Note: -11026 -
TB Outdoor - C.A.C. fixed training - 10590008 - training knife
Equipped with a balance in all respects identical to that of the C.A.C® folding knife, this training knife with a fixed blade does not cut and has a round tip. No accidental injury is possible. The blade is however made of hardened stainless steel so that it can be used in all circumstances.
Intended use: training
Blade: stainless steel
Handle: in ABS
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 230mm.
Weight: 158g.
Sheath: -
Notes: Philippe Perotti design10590008 -
BenchMark - Training Bali - BM006 - Training knife
*** ATTENTION: THE PAYMENT OF THIS ARTICLE MAY NOT 'BE MADE WITH PAYPAL ***
Intended Use: Training
Type of production: Industrial
Country of Origin: USA
Blade: stainless steel 420
Blade treatment: -
Handle: Full steel washers steel
Blade length: 95mm.
Blade thickness: 2.5mm.
Closed Length: 130mm.
Overall length: 230mm.
Thick when closed: 7.5mm
Weight: 165g.
Closed: T-latch
Packaging: Cardboard box with BenchMark logos
Notes: solid, sturdy, with hinged and riveted handles on the blade, great for making trick since it has the same weight, mass and balance of a real knife.BE-BM006 -
Spyderco - Temperance Fixed Trainer - FB05TR - Training knife
Intended Use: Training
Type of production: Industrial
Production Country: Japan
Blade: Stainless steel AUS-6
Blade treatment: Satin finish
Handle: FRN
Blade length: 109mm.
Blade thickness: 4mm.
Overall length: 241mm.
Weight: 146g.
Sheath: Boltaron (plastic) with Tek-Lok coupling
Packaging: cardboard box with Spyderco logos
Notes: Design by Sal Glesser - Exemplary discontinued and no longer available, one piece at our disposal12556 -
ExtremaRatio - BF1TK Folder - Training Knife
Type of production: Industrial
Blade: stainless steel 420
Production Lama: Italy
Handle: Anticorodal
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 99mm.
Overall length: 168mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip: reversible and removable stainless steel
Sheath: -
Notes: Version training model BF1ER-BF1F-TK -
Mac Coltellerie - CQB Training Knife - coltello da allenamento
Destination: training knife, rounded point and dull edge
Type of manufacturing: industrial
Blade: stainless steel W 1.4116 - 55-56HRC
Blade Treatment: stonewash
Made in: Italy
Handle: polymers, REMOVABLE
Blade Length: 160mm.
Blade Thickness: 4mm.
Total Length: 290mm.
Balancing: toward the point, at 1 cm from knife guard
Weight: 314g. (474g. with sheath)
Sheath: cordura, with thigh band
Note: -11027 -
Mac Coltellerie - Tekno Training Knife - coltello da allenamento
Destination: training knife, rounded point and dull edge
Type of manufacturing: industrial
Blade: stainless steel W 1.4116 - 55-56HRC
Blade Treatment: stonewash
Made in: Italy
Handle: polymers
Blade Length: 97mm.
Blade Thickness: 3,5mm.
Total Length: 202mm.
Balancing: on knife guard
Weight: 170g. (212g. with sheath)
Sheath: cordura
Note: -11025 -
Fox - Kempo Bantay Training Knife by Borut Kincl - SLO-01TR - coltello
ImpiegoAllenamento
Lama: Acciaio Inox N690Co 58/60HRC con punta e lama arrotandata
Impugnatura: G10
Lunghezza Lama: 95mm.
Lunghezza Totale: 220mm.
Spessore Lama: 3,5mm.
Lunghezza Chiuso: 120mm.
Peso: 130g.
Chiusura: Liner lock
Clip: in acciaio inox, reversibile
Note:design by Borut Kincl addestratore ufficiale dei corpi speciali Sloveni “ESD (Enota za Specialno Delovanje)”Sistema di sicurezza blocco lama brevettato L.A.W.K.S. e frangi vetro
Fodero: Custodia in Nylon inclusa7727T -
Mac Coltellerie - San Marco Fighting Training Knife - training knife
Intended use: training knife with rounded edge and tip
Type of production: industrial
Blade: 440 steel
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 314g.
sheath: in cordura
Notes: Design by Sandro Martinelli and Marco BellaniMAC-SM-TR