Year 2022
-
Boker Plus - ME 109 Damast knife - 01BO909DAM - knife
The Messerschmitt Bf 109 was built from 1935 onwards and, with a production of around 33,000 aircraft, is the most widely produced fighter aircraft in the history of aviation. Officially, the type designation Bf 109 was never changed, even after BFW was renamed Messerschmitt AG. However, since all aircraft types later developed by Messerschmitt were given the model abbreviation ME, the name ME 109 also became established in the public consciousness for the Bf 109. In the 1930s, it marked the step towards a new generation of low-wing fighter aircraft with a closed pilot's cockpit, retractable landing gear and an all-metal construction of wings and fuselage. This new structure withstood far greater loads than the fabric-covered tubular constructions that had been common up to then, which also had the disadvantage of immense air resistance due to the necessary transverse bracing. As a result, the Messerschmitt's more compact and stable design allowed higher speeds with tighter radii during the cornering and dive maneuvers so crucial to fighter pilots. The Bf 109 was armed with two 20 mm MG FF machine guns in the wings and two 7.92 mm MG 17 machine guns. The latter were mounted directly in front of the pilot and coupled via an interrupter gear to the propeller shaft of the 1,000 hp Daimler V12 engine. In this way it was possible for the MGs to fire through the circular path of the spinning propeller without the projectiles hitting the rotating propeller blades. The MGs were thus very close to the pilot's line of sight. The pilot's seat was steel-plated inside the fuselage area to protect it from enemy fire.
The steel we were able to obtain for our Damascus project came from an E-series Messerschmitt Bf 109 that was shot down by a Royal Airforce Supermarine Spitfire in 1940 during the Battle of Britain near the village of Ashford in the British county of Kent. The specific parts are the rear plate of the pilot's steel-plated seat and the bearing sleeve of the propeller shaft. These are forged by Chad Nichols into a high-carbon, high-cut 80-layer Damascus.
The Boker Plus ME 109 Damascus picks up numerous design elements of the legendary Messerschmitt. The opening at the back of the blade base has the unmistakable shape of the pilot's cockpit and is visible when the knife is closed and open. The folds in the sheet metal of the engine cowling as recesses for the barrel soul axles of the two MG 17s form the template for the schor at the tip of the blade. The flipper indicates a wheel of the retractable landing gear. For the front carbon fiber shell, the material Toxic Storm from the manufacturer Fatcarbon Materials was chosen in the colors green, black and yellow. The color scheme is based on the characteristic camouflage paint of the Bf 109 with greenish-gray undercoat and yellow front fuselage. The opposite side has a titanium framelock with an elaborately integrated carbide contact surface. A beautifully designed and elaborately integrated clip allows the Boker Plus ME 109 to be worn tip-up on the right. Supplied with a high-quality case for storage and a certificate of authenticity.
Intended use: Sports / collection
Type of production: Industrial
Country of production: Taiwan
Blade: Damascus steel
Blade finish: -
Handle: in carbon fiber and titanium
Blade length: 80mm.
Blade thickness: 3.6 mm.
Total length: 180mm.
Weight: 66 g.
Clip: in stainless steel, removable
Closure: frame lock
Packaging: cardboard box with Boker Plus logos, zip case, guarantee certificate
Notes: pinball opening on bearings01BO909DAM -
Lionsteel - T5 Satin - Green Canvas Micarta - T5CVG - knife
Recommended Use: hiking / sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: full tang, stainless steel Niolox
Blade finish: Satin
Handle: Micarta
Blade length: 128mm.
Blade thickness: 5mm.
Total length: 252mm.
Weight: 274g.
Sheath: leather
Packaging: cardboard box with Lion Steel logos
Notes: -LS-T5CVG -
Boker Plus - Urban Trapper Premium G-10 Jade by Brad Zinker - 01BO614 - folding knife
Intended Use: Sporting / Collection
Production Type: Industrial
Country of manufacture: Taiwan
Blade: M390 stainless steel
Blade treatment: Black PVD
Handle: titanium and G-10 jade
Blade length: 90mm.
Blade thickness: 2.6mm.
Total length: 196mm.
Weight: 100g.
Clip: titanium, machined from billet
Locking mechanism: Framelock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Brad Zinker - Ball bearing opening systemBO-01BO614 -
ESEE Knives - Model 4HM Modified Handle - Leather Sheath - Knife
Intended Use: Bushcraft / Utility
Production Type: Industrial
Country of Production: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Black Traction Coating
Handle: Micarta
Blade Length: 115mm.
Blade thickness: 4.8mm.
Total length: 225mm.
Weight: 219g.
Sheath: leather, belt, for vertical carry; Made in the USA
Packaging: cardboard box with ESEE logos.
Notes: modified handle version of Model 4, more suitable for precision work and bushcraft usesESEE-4HM -
MKM - Maximo Flipper Design by Bob Terzuola - Green Micarta - MK-MM-GCT - folding knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Closure: Framelock
Clip: titanium, removable, deep pocket type.
Scabbard: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos
Notes: Tungsten carbide rear glass breaker - Design by Bob TerzuolaMK-MM-GCT -
Fox - Terzuola - Liner Lock Micarta - FX-525MI - knife
Intended Use: Sporting
Production type: Industrial
Blade production: Italy
Blade: Becut stainless steel
Surface Treatment: Beadblasted
Handle: Green Micarta
Blade length: 8.9mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 200mm.
Thickness when closed: 14.5mm
Weight: 105g.
Closure: Liner Lock
Clip: Steel wireclip
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Bob TerzuolaFX-525MI -
Boker Plus - Urban Spillo Jade G10 - gentleman's knife - 01BO357 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: in 440C stainless steel
Blade treatment: black coating
Handle: steel liners and jade G10 grips
Blade length: 78mm.
Blade thickness: 3mm.
Total length: 176mm.
Weight: 47g.
Clip: removable, in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: pinball opening system on ball bearingsBO-01BO357 -
Wander Tactical - Uro Saw Marble knife - Green Micarta - craft knife
Intended use: Utility / Collection
Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: Marble
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balancing: advanced
Weight: 450g.
Sheath: in thermoformed kydex, with double belt loop, M.O.L.L.E. compatible
Packaging: without packaging, accompanied by certificate of authenticity, version with hallmark with WT and DP marks
Notes: Each knife is unique and made entirely by handWT-URS-MGM -
Viper - Lille 2 Fixed Knife by Vox - Elmax Green Canvas Micarta - VT4024CG - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Stonewashed
Handle: Green Canvas Micarta
Blade length: 70mm.
Blade thickness: 3.5mm.
Total length: 170mm.
Weight: 100g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesVT4024CG -
MKM - Hero by Tommaso Rumici - M390, Titanium and Green Micarta - MK-HR-GCT - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta grips , titanium liners and bolsters
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 175g.
Length when closed: 130mm.
Total length: 215mm.
Closure: BackLock
Clip: titanium, removable, deep pocket type
Scabbard: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-HR-GCT -
Fantoni - Hide Fixed Premium by T. Rumici - 20Pcs. Limited Edition - PRIVATE COLLECTION - knife
Knife collected from a private collection - Never used, never taken out of its box, like new - Rare model produced by Fantoni in 2009 in a limited edition of only 20 pieces based on a design by Tommaso Rumici, one of his most famous and successful knives, still very modern and with an incredibly attractive design - Supplied with box, warranty certificate, sheath and replacement Ebony grips - Checked and certified by our in-house laboratory.
Intended Use: Collection / SportingCountry of manufacture: Italy
Type of production: industrial
Blade: stainless steel CPM-S30V 61-62HRC
Blade finish: satin-finished
Handle: made of micarta or ebony wood, interchangeable as desired (cheeks included in package)
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 170mm.
Balance: set back 1cm. from the lower guard branch
Weight: 68g.
Sheath: Made of kydex, with clip
Notes: Design by T. Rumici - Limited and numbered edition of only 20 pieces - Collected from private collection, like new.Link to the HIDE project page directly on the website of Designer Tommaso Rumici
FA-HIDE-CP20 -
Tops - Anaconda Hunters Point knife - AN9-HP - 1095 - knife
Intended use: tactical / collection
Type of production: semi industrial
Blade: full tang in 1095 carbon steel
Production Lama: USA
Handle: Micarta
Blade length: 240mm.
Blade thickness: 6mm.
Closed Length: -
Total length: 375mm.
Balance: advanced - 2.5cm. from the guard branch
Weight: 630g.
Closure: -
Clip: -
Sheath: Cordura
Packaging: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticityTOP-AN9-HP -
Tops - Mini Tom Brown Tracker knife # 4 - Camo 1095 - TBT-040-CAMO - knife
Intended use: Collection / Survival
Type of production: semi industrial
Production Lama: USA
Blade: 1095 58HRC carbon steel
Blade treatment: BTC - Camo Traction Coating
Handle: micarta with red spacers
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length: -
Total length: 168mm.
Thick when closed: -
Balancing: on the guard branch
Weight: 92g.
Closure: -
Clip: -
Sheath: in kydex, tactical with multi-position clip
Packaging: -
Notes: Design by Tom Brown, extra small version of the knife used in the film The Hunted with Benicio Del Toro, each piece is numbered and accompanied by a certificate of guarantee and authenticity.TBT-040-CAMO -
Acta Non Verba - Z400 - Black DLC Sleipner - Olive G-10 - knife
Confident elegance complemented by aristocratic lines gives the Z400 its well-deserved dominance over the rest of our folding knives.
A dagger-style, single-edged spear point blade made from Sleipner steel and equipped with a double guard that allows for an aggressive opening at the edge of the pocket when drawing or the ability to use it as a flipper system. Rounding out the package is an extremely durable, lightweight handle made of G10 composite with a secure liner lock and a deep pocket clip. All of this is designed in combination with a sense of elegance and simplicity. This is the Z400.
Intended use: EDC / SportingProduction Type: Industrial
Country of Production: Czech Republic
Blade: Sleipner 58HRC steel
Blade Finish: Black DLC
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total length: 230mm.
Weight: 110g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush, in Black DLC stainless steel
Package: Cardboard box with ANV logos
Notes: -ANV-Z400-008 -
Acta Non Verba - Z400 - Stonewashed Sleipner - Olive G-10 - knife
Confident elegance complemented by aristocratic lines gives the Z400 its well-deserved dominance over the rest of our folding knives.
A dagger-style, single-edged spear point blade made from Sleipner steel and equipped with a double guard that allows for an aggressive opening at the edge of the pocket when drawing or the ability to use it as a flipper system. Rounding things out is an extremely durable, lightweight handle made of G10 composite with a secure liner lock and a deep pocket clip. All of this is designed in combination with a sense of elegance and simplicity. This is the Z400.
Intended use: EDC / SportingProduction Type: Industrial
Country of Production: Czech Republic
Blade: Sleipner 58HRC steel
Blade Finish: Stonewashed
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total length: 230mm.
Weight: 110g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush mounted
Package: Cardboard box with ANV logos
Notes: -ANV-Z400-006 -
Tops - Skullcrushers Xtreme Blade knife SXB Camo - TPSXB10C - knife
Intended Use: Tactical/Military/Survival
Type of production: semi industrial
Blade: full tang in carbon steel 1095 58HRC
Blade finishing: Camouflage
Handle: Micarta
Blade length: 260mm.
Blade thickness: 6mm.
Total length: 425mm.
Balance: Advanced
Weight: 735g.
Sheath: Nylon
Notes: Design By Xtreme Survivalist & Adventurer EJ Snyder.TPSXB10C -
Spyderco - Para 3 - G10 Digital Camo - C223GPCMO - PRIVATE COLLECTION - knife
Knife collected from private collection - Absolutely like new, old production CPM-S30V steel - Never used - Original sharpening - Original box, slightly marked, with certificates - Knife checked and certified by our internal laboratory
Intended Use: Sporting / TacticalProduction type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade Treatment: Stonewashed
Handle: G-10
Blade Length: 75mm.
Blade thickness: 3.7mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 96g.
Closure: Compression Lock
Clip: Stainless steel
Package: cardboard box with Spyderco logos
Notes: like new knife, taken from a private collectionC223GPCMO-CP