Year 2022

With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.

TWO DISCS

DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable

CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.

SUPERIOR EFFICIENCY

Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.

HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.

TWO DISCS

DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable

CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.

SUPERIOR EFFICIENCY

Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.

HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.

TWO DISCS

DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable

CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.

SUPERIOR EFFICIENCY

Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.

The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.

TWO DISCS

DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable

FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable

SUPERIOR EFFICIENCY

Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.

20 ° SHARPENING ANGLE FOR STABLE SHARPNESS

The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.

THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING

The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.

Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.

The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.

The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.

Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.

This item is not compatible with HORL ® 2 CRUISE.

Strop: Measurements: 25 x 5 cm - Thickness: 5mm

Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.

Measurements: 25 x 5 cm - Thickness: 5mm

With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Three covers a wide range of applications.

The modern Spear Point blade and handle of the Charlie Three are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The Stonewashed finish creates a scratch-resistant surface and increases the blade's corrosion resistance.

Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip. 

The Charlie Three BK comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.

Intended Use: Tactical/Sporting

Blade: Full tang made of D2 steel at 59/60HRC with Stonewashed finish
Handle: -
Blade length: 95mm.
Blade thickness: 6mm.
Total length: 210mm.
Weight: 152g.
Sheath: kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signed

With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.

The focus is on the massive classic Drop Point blade of the Compact Two, which is 86 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The surface of the blade has a tactical, non-reflective TiNi titanium nitriding coating that provides excellent protection against external corrosives.

The reduced handle design is the basis for the knife's very compact size. The pleasantly rounded tang and cleverly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.

The Compact TWO BK is equipped with a robust, high-quality Kydex sheath in black. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.

Intended use: Tactical / Sporting

Blade: Full tang in D2 steel at 59/60HRC with TiNi coating
Handle: In G-10
Blade length: 86mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.

With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.

The focus is on the massive classic Drop Point blade of the Compact Two, which is 86 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion.

The reduced handle design is the basis for the knife's very compact size. The nicely rounded tang and expertly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.

The Compact Two SW is equipped with a robust, high-quality Kydex sheath in FDE (Flat Dark Earth) color. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.

Intended use: Tactical / Sporting

Blade: Full tang in D2 steel at 59/60HRC
Handle: In G-10
Blade length: 86mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.

With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.

The focus is on the massive, classic Bowie blade of the Compact One, which is 88 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion.

The reduced handle design is the basis for the knife's very compact size. The nicely rounded tang and expertly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.

The Compact One SW is equipped with a robust, high-quality Kydex sheath in FDE (Flat Dark Earth) color. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.

Intended use: Tactical / Sporting

Blade: Full tang in D2 steel at 59/60HRC
Handle: In G-10
Blade length: 88mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.