Machetes and Bowie Knives for Sale: Quality Blades for Every Need

Intended Use: Sport / Collection

Type of production: Industrial
Production Blade: Taiwan
Blade: 440C stainless steel hardened selective
Treatment Blade: -
Handle material: Leather Rings
Blade length: 329mm.
Blade thickness: 5.5mm.
Length closed: -
Overall length: 450mm.
Thick when closed: -
Balancing: -
Weight: 832g.
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos Down Under Knives
Notes: -

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.

In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition, with a few minor signs of age on the guard and pommel
* Commercially available: Discontinued
* Sharpening: Professionally resharpened
* Marks on blade: None
* Marks on handle: A few minor signs of age on the guard and pommel
* Box: Included
* Sheath: Included and like new
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

The Fallkniven SK6L Krut represents the perfect blend of Scandinavian tradition and modern high-end knife craftsmanship. Inspired by the great work knives of the Swedish forests, it is designed to confidently tackle the most demanding outdoor activities, from hunting to bushcraft, without sacrificing its signature Nordic elegance.

Its sturdy construction, handle made of fine figured birch, and CoS cobalt-laminated steel blade with a convex grind offer an ideal balance between strength, cutting performance, and edge retention. Rounding out the package is a high-quality leather sheath, designed to ensure safe transport and quick access to the knife.

“Krut,” an old nickname given to Swedish soldiers about two centuries ago and meaning “gunpowder,” evokes the rugged and reliable spirit of this model: a knife designed to accompany the user on any adventure, built to last a lifetime.

Intended Use: Hunting / Utility

Production Type: Industrial
Country of Manufacture: Sweden
Blade: Hidden tang made of laminated stainless steel (SanMai) CoS at 60 HRC
Blade Finish: Satin
Handle: Figured birch wood with a through-guard and nickel silver pommel
Blade Length: 160 mm.
Blade thickness: 6 mm.
Overall length: 280 mm.
Weight: 268 g.
Sheath: Leather, belt-mounted, for vertical carry
Packaging: Cardboard box with manufacturer’s logos
Notes: Previously purchased knife, from a private collection

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition
* Commercial Availability: Discontinued with this steel; currently available with VG7 laminated steel
* Sharpness: Factory-sharpened, could be improved
* Marks on the blade: Some minor signs of oxidation and a few barely noticeable marks, visible when held up to the light
* Marks on the handle: A few marks on the guard and the pommel
* Box: Included
* Sheath: Included, in excellent condition
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

The NL3 model takes its name from Njord, the Norse god of fertility, sailors, and fishermen, a member of the Vanir clan and lord of the coasts and beaches. Just like the deity who inspired it, this knife embodies strength, balance, and reliability, standing out as one of the most fascinating and versatile tools in the prestigious Northern Light Series.

Designed without compromise, the NL3 Njord combines exceptional performance, the highest-quality materials, and a refined design, offering a unique user experience for both enthusiasts and professionals. At the heart of its extraordinary robustness lies the VG10 laminated steel blade—an advanced technological solution that guarantees strength, edge retention, and reliability even under the most demanding conditions.

Every detail of the Northern Light Series has been carefully crafted to create a strong, elegant, and comfortable knife that meets the highest standards. The NL3 Njord is not just a working tool: it is a knife that captivates at first glance and evokes genuine emotion every time it is held.

Intended Use: Hunting / Sports

Blade: hidden tang made of San-Mai laminated stainless steel (VG-10 and 420J2) at 59 HRC with a convex grind
Handle: oxhide leather rings, 420J2 steel guard, and aluminum pommel
Blade length: 150 mm.
Blade thickness: 6 mm.
Overall length: 268 mm.
Balance: forward
Weight: 266 g.
Sheath: high-quality leather for vertical belt carry
Notes: Previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private collection, previously purchased, WITHOUT BOX

• Condition: good overall condition, never used

• Available on the market: still in production

• Sharpness: factory sharp

• Marks on blade: signs of slight surface oxidation on part of the blade as shown in the photos

• Marks on handle: none

• Box: -

• Sheath: in good overall condition

• Manuals, certificates and warranties: -

• Checked and certified by our in-house laboratory

The Cold Steel 1917 echoes the style of early 20th century military knives, particularly the Bowie and navy models used during the First World War. The design combines classic lines and modern materials, offering a wide, balanced blade ideal for powerful cuts and heavy-duty work. The hardwood handle and steel guard evoke the aesthetics of 1917 service weapons, reinterpreted with Cold Steel's usual robustness.

Use: Sporting / Collectible

Type of production: semi-handcrafted
Blade production: India
Blade: 1085 High Carbon steel
Blade treatment: burnishing
Handle: rosewood
Blade length: 305mm.
Blade thickness: 6.2mm.
Overall length: 440mm.
Balance: rear
Weight: 658g.
Sheath: leather and metal
Packaging: -
Notes:

KNIFE FROM PRIVATE COLLECTION
* Type: Previously purchased, from a private collection
* Condition: As new
* Availability: Rare 1980s/90s bowie, discontinued and no longer available
* Sharpening: Factory edge
* Blade marks: -
* Handle marks: -
* Box: Present, with green foam interior
* Sheath: Present, in excellent condition
* Manuals, Certificates, and Warranty: -
* Inspected and certified by our in-house workshop

The Puma Skinmaster 11 6010 with stag horn handle is a premium hunting knife, forged from a single block of 1.4116 steel according to the renowned Solingen tradition. Designed for skinning, it offers a perfect balance between strength and handling. The thick, short blade ensures precision and durability, while the genuine stag horn handle adds elegance and excellent ergonomics. Each piece is unique, with natural grain patterns that make it both a working tool and a collector’s item. Equipped with a high-quality leather sheath, the Puma Skinmaster is the ideal companion for demanding hunters and for those seeking a knife that can face any outdoor challenge with style and reliability.

Intended use: Skinning / hunting
Production type: Fully forged (integral) from a single piece of steel
Country of origin: Germany (Solingen)
Blade: 1.4116 stainless steel (DIN WN 1.4116), hardness 55–57 HRC
Blade finish: Satin
Handle: Stag horn
Blade length: 93 mm
Blade thickness: 5 mm
Overall length: 204 mm
Weight: 240 g
Package: Leather sheath; wooden box
Notes: Each handle is unique thanks to the natural grain of stag horn; a balanced, durable knife ideal for intensive use

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Iconic knife handmade in 2021, withdrawn from a private collection, previously purchased
* Condition: in excellent condition, unused and kept solely in a collection
* Available on the market: Currently out of catalog and cannot be ordered/obtained from the craftsman
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: in excellent condition, with signature and date of manufacture
* Manuals, Certificates, and Guarantees: Certificate of guarantee and authenticity with date and technical data of the model
* Checked and certified by our in-house laboratory

THE LEGEND
Jimmy Lile (1933–1991), known as “The Arkansas Knifesmith,” was one of the most important American knife makers of the 20th century. Born in Russellville, Arkansas, he made his first knife at the age of 11 and devoted himself professionally to knife making in 1971.

He is famous for the legendary Rambo knives, designed for real use with 440C blades, hollow handles, and innovative details. He was president of the Knifemakers' Guild, and his works were commissioned by presidents and celebrities.

He died in 1991, leaving a legacy of the highest caliber in custom and collectible knives.

THE PRESENT
Today, the Lile Knives, LLC brand is owned by John Hill of McKinney, Texas. In the 1980s, John was already collaborating with Bob Rankin on the sale of original Rambo knives, and in 2003 he co-authored a book dedicated to Lile's work.

After Jimmy's death, John maintained a strong relationship with Marilyn (Lile) Miller and purchased the Lile brand from her to continue producing high-quality replicas of the movie knives, adhering to custom knife standards and guaranteeing Marilyn royalties.

Since 2011, John Hill has been collaborating with Vaughn Neeley, former owner of Timberline Knives, to produce limited editions of Rambo knives that are prized by collectors. Today, Vaughn produces the entire new “Cerakote™ Series,” while the “Utility Series” is produced under his supervision, keeping alive the tradition and quality of Jimmy Lile's original models.

THE KNIFE
“The Mission” is one of the most iconic survival knives ever made, born from Jimmy Lile's vision to combine extreme functionality and military design.

Featuring a stainless steel blade finished entirely with bead-blasting to eliminate reflections, this model combines tactical aesthetics and real performance.

The back is equipped with aggressive serrations, while the hollow handle, wrapped in paracord, integrates a compass and allows for the transport of small tools.

The multifunction guard features screwdriver tips, making it a complete survival tool. Produced in a limited edition, “The Mission” represents the perfect synthesis between a combat knife, field tool, and collector's item.

Intended use: Collection / Survival

Type of production: entirely handmade
Country of production: USA
Blade: CPM-154CM stainless steel
Blade treatment: Titanium Grey Cerakote
Handle: 316 stainless steel, hollow, waterproof, paracord coated; 316 stainless steel through guard; screw-in aluminum tang with integrated glass breaker and Pyser Optics NATO internal compass
Blade length: 253mm.
Blade thickness: 7 mm.
Total length: 393 mm.
Weight: 573 g.
Sheath: black leather, belt-mounted, for vertical carry, with craftsman's signature and date of manufacture
Packaging: supplied with warranty certificate with date of manufacture and technical details
Notes: iconic knife used in the Rambo films, entirely handmade, with LILE logos and serial number. Previously purchased, never used, from a private collection

Trail Master in CPM 3V steel – The ultimate evolution of an outdoor classic

There is no better companion for outdoor adventures than the legendary Trail Master, now available in an even more durable version made of CPM 3V steel. Featuring a powerful 9.5-inch clip point blade with an unusually sturdy tip for this type of profile, it is designed to withstand wear, abuse, and extreme stress without batting an eye.

CPM 3V steel guarantees incredible cutting ability and exceptional edge retention, surprising even the most experienced users. A blade like this takes time, skill, and resources to produce — take advantage of it while it's available.

Intended use: Hunting / Utility

Type of production: industrial
Country of production: Taiwan
Blade: CPM-3V carbon steel
Blade treatment: Satin finish
Handle: Kray-Ex (Kraton) with through guard
Blade length: 239mm.
Blade thickness: 7.7mm.
Total length: 370mm.
Balance: advanced
Weight: 478g.
Sheath: Secur-Ex thermoplastic
Packaging: cardboard box with Cold Steel logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, from a private collection.
* Condition: in very good condition, never actually used, with slight signs of time
* Commercially available rare bowie from the 70s/80s discontinued and no longer available
* Sharpening: Factory.
* Marks on blade: A few small marks due to time.
* Marks on handle: A few small marks due to time
* Box: Present, but lacking the green foam inner liners, which have deteriorated over time
* Scabbard: Present, in very good condition, marked “Western Germany”
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Puma 6356 Original Bowie - A Unique Collector's Knife

The Puma 12 6356 is a remarkable vintage hunting knife known for its sturdiness, quality workmanship and excellent durability. Made in Germany from Pumaster steel, a high-performance alloy steel, this knife offers an ideal combination of hardness, wear resistance, and reliability. Pumaster approaches the performance of modern steels such as D2, with a similar composition that includes good carbon and chromium content. Although it does not reach the hardness of modern ultra-high performance steels, Pumaster is still able to maintain an exceptional edge over the long term, showing superior corrosion resistance compared to pure carbon steels such as 1095 or C75.

With a blade measuring nearly 10 inches long and an overall length of more than 15 inches, the Puma 12 6356 is an imposing knife that does not go unnoticed. Its nickel silver through-guard and rosewood handle give the knife a sophisticated look, while the quality of its craftsmanship ensures durable performance. 

This specimen, which appears to have never been used, is in excellent condition and is complete with its original box and leather sheath - special feature of the latter is that it is still marked “Western Germany,” which dates it pre-1986.

It is an ideal choice for any collector. Not only a high-quality hunting knife, but a true collector's item for fans of vintage Puma items.

Intended Use: Collectible / Vintage / Hunting

Type of production: Handcrafted
Country of manufacture: West Germany (pre-1986)
Blade: integral, Pumaster steel (a tool steel very simle to today's D2)
Blade finish: mirror polish
Handle: nickel silver through-guard and Rosewood riveted handle
Blade length: 255m.
Blade thickness: 5.5mm.
Total length: 386mm.
Balance: advanced
Weight: 555g.
Sheath: leather
Packaging: wooden case, lacking interior linings (deteriorated with time)
Notes: rare Vintage knife late 1970s, early 1980s - previously purchased, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: Collected from a private individual, previously purchased.
* Condition: Never used, absolutely like new
* Commercially available: Still in production, hard to find
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Marketed by manufacturer without a box
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

This replica of Major Von Tempsky's 6.5” Bowie knife is inspired by the design of the knife he created and assigned to his company of Forest Rangers in 1863.

Gustavus Ferdinand von Tempsky (1828-1868) was a German-born adventurer, soldier and artist, known for his role in the New Zealand Wars and for his leadership among the Forest Rangers. His adventurous life and courage made him a legendary figure, particularly in the context of battles between European settlers and Māori peoples.

He learned the advantages of Bowie knife fighting in California during his stint as a prospector, where he had acquired an excellent American-made knife; once he arrived in New Zealand and found himself in charge of Forest Ranger Company No. 2 with the rank of major, he had about 30 Bowie knives made for his men according to his personal design by a blacksmith in Shortland St. Auckland. The Forest Rangers were an elite corps of mounted scouts employed by the colonial government between August 1863 and October 1867 during the New Zealand Wars.

At the time, knives were made of wagon spring steel, one of the few steels available to blacksmiths in Auckland in 1863, and Von Tempsky, an experienced fighter, taught his men the use of the Bowie knife in hand-to-hand combat. The knife was used to defend against enemy blows while a pistol was usually held in the other hand.

In addition to combat, Bowie knives were used to open paths in the forest, dig defensive positions, cut firewood, and for general use while camping.

Use: Heavy Duty / Collection

Type of production: Handcrafted
Country of manufacture: New Zealand
Blade: full tang made of 8670 spring steel, high carbon content
Blade Finish: Direct heat treatment, which goes to create special color play on the blade
Handle: Wenge wood with carbon steel through-guard
Blade length: 165mm.
Blade thickness: 6mm.
Total length: 283mm.
Balance: advanced
Weight: 600g.
Sheath: leather
Packaging: unwrapped, sold certificate of warranty and authenticity
Notes: previously purchased knife, never used, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Never used, absolutely like new
* Commercially available: Still in production, hard to find
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Marketed by manufacturer without a box
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

This replica of Major Von Tempsky's 11” Bowie knife is inspired by the design of the knife he created and assigned to his company of Forest Rangers in 1863.

Gustavus Ferdinand von Tempsky (1828-1868) was a German-born adventurer, soldier and artist, known for his role in the New Zealand Wars and for his leadership among the Forest Rangers. His adventurous life and courage made him a legendary figure, particularly in the context of battles between European settlers and Māori peoples.

He learned the advantages of Bowie knife fighting in California during his stint as a prospector, where he had acquired an excellent American-made knife; once he arrived in New Zealand and found himself in charge of Forest Ranger Company No. 2 with the rank of major, he had about 30 Bowie knives made for his men according to his personal design by a blacksmith in Shortland St. Auckland. The Forest Rangers were an elite corps of mounted scouts employed by the colonial government between August 1863 and October 1867 during the New Zealand Wars.

At the time, knives were made of wagon spring steel, one of the few steels available to blacksmiths in Auckland in 1863, and Von Tempsky, an experienced fighter, taught his men the use of the Bowie knife in hand-to-hand combat. The knife was used to defend against enemy blows while a pistol was usually held in the other hand.

In addition to combat, Bowie knives were used to open paths in the forest, dig defensive positions, cut firewood, and for general use while camping.

Use: Heavy Duty / Collection

Type of production: Handcrafted
Country of manufacture: New Zealand
Blade: full tang made of 8670 spring steel, high carbon content
Blade Finish: Direct heat treatment, which goes to create special color play on the blade
Handle: Wenge wood with S-shaped carbon steel through-guard
Blade length: 280mm.
Blade thickness: 7mm.
Total length: 425mm.
Balance: advanced
Weight: 925g.
Sheath: leather
Packaging: unwrapped, sold certificate of warranty and authenticity
Notes: previously purchased knife, never used, from a private collection

Intended Use: Tactical / Heavy Duty

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Black Powder Coating
Handle: made of Griv-Ex polymer, with steel pommel
Blade length: 267mm.
Blade thickness: 5mm.
Total length: 387mm.
Balance: Advanced
Weight: 474g.
Sheath: Secure-Ex ABS
Packaging: Cardboard box with Cold Steel logos
Notes: -

Intended Use: Tactical

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Stonewashed
Handle: made of Griv-Ex polymer, with steel pommel
Blade length: 267mm.
Blade thickness: 5mm.
Total length: 387mm.
Balance: Advanced
Weight: 474g.
Sheath: Secure-Ex ABS
Packaging: Cardboard box with Cold Steel logos
Notes: Limited and numbered edition with serial number engraved on blade and with Lynn Thompson's autograph on box

Knife from a private collection - presumably produced in the early 1980s - overall in excellent condition, with factory sharpening - accompanied by original leather sheath - checked and certified by our in-house laboratory.

* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, difficult to find, dating back to the 80s
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:-
* Sheath: in leather
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory

Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included freehand knives, tools and razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.

Intended use: Collection / Survival

Type of production: industrial
Blade: 440A Ice Tempered stainless steel
Country of production: Germany
Handle: brass, coated with synthetic material, hollow inside (useful space approx. 50mm. X 14mm.) With screw cap
Blade length: 185mm. (length of serration on the back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balancing: on the guard
Weight: 400g.
Sheath: in leather, with pocket containing a sharpening stone
Notes: knife from the early 1980s, from a private collection, overall in excellent condition

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Typology: withdrawn by private individual
* Condition: in excellent condition
* Available on the market: discontinued since 2015
* Sharpening: factory sharpening
* Marks on the blade: small marks on the tip caused by the extraction from the sheath
* Marks on the handle: no marks
* Box: original Fox box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

ST3-F is a knife studied and designed by the head instructor Paolo Bozzo of TEAM SURVIVAL (survival and survival school).
This project was developed through years of direct experience in the field.

Intended use: Survival / Utlity

Type of production: Industrial
Production Lama: Italy
Blade: N690Co stainless steel
Blade treatment: Black Teflon
Handle: Green Canvas Micarta
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 360mm.
Balance: Advanced to 2.5cm. from the guard branch
Weight: 552g.
Sheath: in cordura with molle attachments
Packaging: cardboard box with Fox logos
Notes: designed by Paolo Bozzo

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Black Blood dual tone
Handle: Micarta
Blade length: 198mm.
Blade thickness: 5mm.
Total length: 345mm.
Balancing: backward
Weight: 436g.
Sheath: in brown leather
Packaging: without packaging, supplied with its own certificate of authenticity
Notes: Dimorphodon with clip point tip and Rambo knife style blade - Limited Edition - Each knife is unique and handcrafted

Knife from a private collection - presumably produced in the early 1980s - overall in excellent condition, with factory sharpening - accompanied by original leather sheath - checked and certified by our in-house laboratory.

Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid, Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was involved in the production of knives including slipjoint, automatic knives, daggers, machetes, bowies, razors, and kitchen knives. Over the years, several trademarks were created and 22 patents held by the company and millions of pieces sold worldwide. Carl Schlieper was liquidated by bankruptcy in 1993. Production of the brand was later acquired by Freidrich Olbertz in Solingen.

Intended use: Collection/Survival

Type of production: industrial
Blade: stainless steel 440A Ice Tempered
Country of manufacture: Germany
Handle: brass, synthetic coated, hollow inside (usable space approx. 50mm. x 14mm.) with screw cap
Blade length: 185mm. (serrated length on back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balance: on the guard
Weight: 400g.
Sheath: leather, with pocket containing a sharpening stone
Notes: knife from the early 1980s, from a private collection, overall in very good condition

Knife from a private collection - First series, first generation, the first and original "Made in USA" Trailmaster from 1988 - Overall in good condition, shows small signs of oxidation on the blade and some minor signs of time on the leather sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath, but lacking box and manuals - Checked and certified by our in-house lab.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: USA
Blade: Carbon V steel
Blade treatment: satin finish
Handle: kraton and brass
Blade length: 240mm.
Blade thickness: 8mm.
Total length: 370mm.
Balance: advanced
Weight: 515g.
Sheath: black leather
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988, overall in good condition.

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: Germany
Blade: 440C stainless steel
Blade treatment: Satin finish
Handle: Stag with steel guard and aluminum knob
Blade length: 177mm.
Blade thickness: 4.5mm.
Total length: 305mm.
Balancing: advanced
Weight: 274g.
Sheath: in leather
Packaging: Cardboard box with Linder logos
Note: -

USED KNIFE, TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased and used
* Condition: In good overall condition (see accompanying photos)
* Commercially available 
* Sharpening: Resharpened by our workshop, also clean oxidation which has affected some portions of the edge, which is however back in working order
* Marks on blade: YES
* Marks on handle: YES, various superficial oxidation stains
* Box: Present and original, in cardboard
* Scabbard: in good condition
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: Hunting / Outdoor

Production type: Industrial
Blade production: Taiwan
Blade: Stainless steel 440C differentiated hardening 58/45HRC
Blade Treatment: Mirror polished
Handle: Brass, ebony wood and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Scabbard: Leather
Packaging: Cardboard box
Notes: Accompanied by a whetstone.

The Outback is a clear homage to the knife used by Paul Hogan in the Mr. Crocodile Dundee films, in fact it faithfully follows its shape and dimensions.

Intended use: sports / collection / hunting

Type of production: Semi-Industrial
Lama production: India
Blade: 1065 carbon steel
Handle: brown wood
Blade length: 300mm.
Blade thickness: 4.5mm.
Total length: 465mm.
Balancing: 5 cm advanced
Weight: 542g.
Sheath: in brown leather
Packaging: cardboard box

Intended use: Sports / Hunting / Collection

Type of production: Industrial
Country of production: Taiwan
Blade: carbon steel O-1
Blade treatment: satin finish
Handle: micarta, with brass guard
Blade length: 269mm.
Blade thickness: 7.6mm.
Total length: 399mm.
Balancing: advanced
Weight: 483g.
Sheath: in ABS, of the SecurEx type
Packaging: cardboard box with Cold Steel logos
Note: -

Duetto knife - Bowie with folding knife

Bowie

Intended use: sports

Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: Spain
Handle: wood
Blade length: 210mm.
Blade thickness: 5.5mm.
Length closed: -
Total length: 342mm.
Balancing: -
Weight: 426g.
Closing: -
Clip: -
Sheath: Leather
Note: late 90s production "

Folder

Intended use: sports

Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: Spain
Handle: wood
Blade length: 98mm.
Blade thickness: 3mm.
Length closed: -
Total length: 222mm.
Balancing: -
Weight: 184g.
Closing: -
Clip: -
Note: late 90s production "

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton with steel guard
Blade length: 245mm.
Blade thickness: 6.8mm.
Total length: 380mm.
Balancing: advanced
Weight: 620g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

Use: Sporting 

Production Type: Industrial
Country of Production: Taiwan
Blade: stainless steel AUS-8A
Blade finishing: stonewashed
Handle: Kray-Ex kraton
Blade Length: 229mm.
Blade thickness: 4,7mm.
Total length: 359mm.
Balance: on guard branch
Weight: 352g.
Scabbard: Secur-Ex Thermoplastic
Packaging: cardboard box with Cold Steel logos
Notes: -

Sturdy bowie knife with clip point blade made of steel with a high carbon content.

Employment: Sports / Collection

Type of production: seeds / craft
Lama production: India
Blade: 1085 High Carbon steel
Lama treatment: burnishing
Handle: rose wood
Blade length: 305mm.
Blade thickness: 6.2mm.
Total length: 440mm.
Balancing: set back
Weight: 658g.
Sheath: in leather and metal
Package: -
Note:

Intended use: Survival / utlity

Type of production: Industrial
Production Country: Italy
Blade: Stainless Steel N690Co
Blade treatment: Black Idroglider
Handle: Forprene
Blade length: 190mm.
Blade thickness: 5mm.
Overall length: 320mm.
Balancing: Advanced to 3cm. by guard branch
Weight: 370g.
Sheath: Nylon
Packaging: cardboard box with Fox logos
Notes: designed and developed in collaboration with Alfredo Doricchi

Intended use: Survival / utlity

Type of production: Industrial
Production Country: Italy
Blade: Stainless Steel N690Co 58/60 HRC
Blade treatment: Satin finish
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5mm.
Overall length: 310mm.
Balancing: Advanced to 2cm. by guard branch
Weight: 330g.
Sheath: Nylon, from thigh
Packaging: cardboard box with Fox logos
Notes: -

Intended use: Survival / utlity

Type of production: Industrial
Production Country: Italy
Blade: Stainless Steel N690Co
Blade treatment: Satin finish
Handle: Forprene
Blade length: 190mm.
Blade thickness: 5mm.
Overall length: 320mm.
Balancing: Advanced to 3cm. by guard branch
Weight: 370g.
Sheath: Nylon
Packaging: cardboard box with Fox logos
Notes: designed and developed in collaboration with Alfredo Doricchi

ECLIPSE version, in 1095 carbon steel and sheath and handle in black leather

Intended Use: Hunting / Outdoor

Type of production: Industrial
Production Country: Taiwan
Blade: carbon steel in 1095 to 58 / 59HRC
Blade treatment: mirror polishing
Handle: brass and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Overall length: 405mm.
Weight: 800g.
Sheath: Black Leather
Packaging: cardboard box with Down Under logos, sharpening steel for sharpening
Notes: The Outback is a clear homage to the knife used by Paul Hogan in the movie Crocodile Dundee, it indeed follows closely the shape and size.

Intended Use: Collection / Sports

Type of production: Industrial
Production Lama: Taiwan
Blade: stainless steel 440C
Treatment Lama: Glazing
Handle: Leather Rings
Blade length: 179mm.
Blade thickness: 6mm.
Length closed: -
Overall length: 322mm.
Thick when closed: -
Balancing: -
Weight: 383g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Gift Box hard drive with logos Boker Magnum Collection 2015, warranty card, micro-fiber cloth for cleaning
Notes: Specimen limited edition, made of 1,999 pieces individually numbered sequentially. Design by David Broadwell

Intended use: Collection / Sports

Type of production: Industrial
Production Lama: Taiwan
Blade: 440C stainless steel
Treatment Blade: Satin
Handle: Micarta
Blade length: 190mm.
Blade thickness: 8mm.
Length closed: -
Overall length: 310mm.
Thick when closed: -
Balancing: -
Weight: 578g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Gift Box hard drive with logos Boker Magnum Collection 2014
Note: Specimen limited edition, made in 1999 pieces individually numbered sequentially. Design by Dennis Friedly

Intended use: Collection / Sports

Type of production: Industrial
Production Blade: Taiwan
Blade: 440C stainless steel
Treatment Blade: double glazing horizontal and vertical
Handle material: Micarta
Blade length: 204mm.
Blade thickness: 6.4mm.
Length closed: -
Total length: 343mm.
Thick when closed: -
Balance: -
Weight: 428g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Gift Box hard drive with logos Boker Magnum Collection 2013
Notes: Specimen limited edition, made in 1999 pieces individually numbered sequentially. Design by Scott McGhee

United - GH5027 Hibben Legacy Bowie knife -

Intended Use: Sport / Collection
Type of production: Industrial
Production Lama: China
Blade: 7Cr17MoV stainless steel
Treatment Blade: Mirror polished
Handle material: Micarta
Blade length: 145mm.
Blade thickness: 5mm.
Length closed: -
Total length: 305mm.
Thick when closed: -
Balance: -
Weight: 348g.
Closing: -
Clip: -
Sheath: Black leather
Packaging: Cardboard box with logos United Cutlery - Warranty
Notes: Design by Gil Hibben and Wesley Hibben

Intended Use: Sport / Collection
Type of production: Industrial
Production Lama: China
Blade: 7Cr17MoV stainless steel
Treatment Blade: Mirror polished
Handle: Wood
Blade length: 240mm.
Blade thickness: 5mm.
Length closed: -
Total length: 380mm.
Thick when closed: -
Balance: -
Weight: 540g.
Closing: -
Clip: -
Sheath: Black leather
Packaging: Cardboard box with logos United Cutlery - Warranty
Notes: Design by Gil Hibben

Intended use: Sport / Collection

Type of production: Industrial
Blade production: Taiwan
Blade: 440C stainless steel with selective tempering
Blade treatment: -
Handle: Leather rings
Blade length: 285mm.
Blade thickness: 5.5mm.
Closed length: -
Total length: 415mm.
Thickness when closed: -
Balance: -
Weight: 630g.
Lock: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with Down Under Knives logos
Notes: -

Avi Nardia - Martial Arts Instructor
When I began teaching combat unfortunately I noticed that many teach the use of the knife in the wrong way. The knife is one of the most important tools for the man and his daily use is connected to my personal story, to my way of life, the principles learned from the teachings of my father and all the experience acquired as a teacher. So I decided to design this knife especially for my students, who have to learn that when they are alone in the woods must be able, with a single tool, to build their shelter, finding food and water, build a fire to know and meet all requirements needed to survive. My idea is with the knife KAPAP can survive and save lives in any place and at any time.

Intended Use: Survival / Utlity

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Black Idroglider
Handle: Black Canvas Micarta
Blade length: 190mm.
Blade thickness: 6mm.
Length closed: -
Total length: 320mm.
Thick when closed: -
Balance: Advanced to 3cm. the branch of guard
Weight: 395g.
Closing: -
Clip: -
Sheath: Cordura, with attacks SPRINGS
Packaging: cardboard box with logos Fox FKMD
Notes: Survival Kit included, removable, supplied with Cordura case with attacks SPRINGS-Designed and developed in collaboration with Avi Nardia, Kapap Combatives Instructor

The survival kit contains:
* Container for water
* Nylon strap
* Mini Compass
* candle
* Flint
* Wire saw
* Fishing kit
* Multi-tool
* matches
* Needle and thread kit
* blade
* Emergency whistle
* Copper wire
* SOS mirror
* lapis
* Fluorescent light stick

Intended Use: Heavy Utility / Machete

Production type: Industrial
Country of Production: Italy
Blade: D2 steel at 58/59HRC
Blade Finish: Black PVD
Handle: Canvas Micarta
Blade length: 230mm.
Blade thickness: 4.8mm.
Total length: 390mm.
Balance: Advanced
Weight: 498g.
Sheath: Cordura with M.O.L.L.E. system.
Packaging: Cardboard box
Notes: Design by Tommaso Rumici

Destinazione d'uso: Caccia/Collezione

Lama: Acciaio Inox 440C
Manicatura: Cervo
Lunghezza lama: 200mm.
Spessore della lama: 4mm.
Lunghezza totale: 325mm.
Bilanciatura: Avanzata, 1 cm. dal ramo di guardia
Peso: 360g.
Fodero: Da cintura, in cuoio

Intended use: Hunting / Outdoor

Type of production: Industrial
Production Blade: Taiwan
Blade: 440C stainless steel hardened differentiated 58/45HRC
Treatment Blade: Mirror polishing
Handle: Brass, ebony wood and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Sheath: In leather, crocodile-like
Packaging: cardboard box with logos Down Under, sharpener for sharpening
Notes: The outback is a clear homage to the knife used by Paul Hogan in Crocodile Dundee movie, in fact faithfully reproduces the shape, size and material as the one used for filming.

Intended Use: Collection

Type of production: Industrial
Production Lama: China
Blade: 3Cr13 stainless steel 50/52
Treatment Lama: -
Handle: avoriolina scrimshaw printed with "The Expendables"
Blade length: 340mm.
Blade thickness: 4mm.
Length closed: -
Total length: 480mm.
Thick when closed: 8mm.
Balance: -
Weight: 800g.
Closing: -
Clip: -
Sheath: Black leather
Packaging: Guard and false gold plated - Warranty - Cardboard box with logos The Expendables
Notes: Exact replica behind movie licenses in the film directed by and starring Sylvester Stallone: The Expendables (The Expendables)

Intended use: Hiking / Heavy Utility

Type of production: Industrial
Production Lama: USA
Blade: 1095 steel at 56 / 58HRC
Blade treatment: Black Traction Coating
Handle: Zytel
Blade length: 235mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 375mm.
Thick when closed: -
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: ABS and Nylon
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Intended use: Hunting / Collection

Blade: 440 58HRC Stainless Steel
Handle: Cocobolo wood
Blade length: 250mm.
Blade thickness: 4mm.
Total length: 390mm.
Length closed: -
Balancing: Advanced, 3cm. from the guard branch
Weight: 575g.
Closure: -
Clip: -
Sheath: From belt, in leather

New version 2014 with Foliage Green Micarta handle

ST3-F is a knife designed and drawn by chief instructor Paul Bozzo TEAM SURVIVAL (school of survival and survival).
This project was developed through years of direct experience in the field.

Intended Use: Survival / Utlity

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Black Teflon
Handle: Canvas Micarta Green
Blade length: 220mm.
Blade thickness: 6mm.
Overall length: 360mm.
Balancing: Advanced 2.5 cm. the branch of guard
Weight: 552g.
Sheath: Cordura with soft attacks
Packaging: cardboard box with Fox logos
Note: designed by Paul Bozzo

Nuova versione 2016, ora in acciaio O1

Destinazione d'uso: hard utility/sportivo

Tipo di produzione: industriale
Produzione Lama: Taiwan
Lama: in acciaio O1
Trattamento Lama: satinatura
Manicatura: Kraton
Lunghezza lama: 240mm.
Spessore lama: 8mm.
Lunghezza totale: 370mm.
Spessore da chiuso: -
Bilanciatura: avanzata, a 3cm dal ramo di guardia
Peso: 515g.
Fodero: SecurEx in materiale termoplastico
Confezione: astuccio di cartone con loghi cold steel
Note: versione 2016 con nuovo acciaio e nuovo fodero

New 2019 version, now with 31cm blade. (previously from 26cm.)

Intended use: Hunting / Collection

Type of production: industrial
Blade: in C60 (1060) steel with high carbon content - 58-59 HRC
Blade finish: Satin finish
Country of production: Solingen - Germany
Handle: Cocobolo wood with nickel-plated steel guard and knob
Blade length: 310mm.
Blade thickness: 5mm.
Total length: 440mm.
Balance: Advanced
Weight: 656g.
Sheath: Leather
Notes: new 2019 version

American Bowie Hunter 19USA92 - knife

Intended Use: Sport / collection / Hunting

Production Type: Semi-Industrial edition collection of 1992 - part one
Blade Production: USA
Blade: AUS-8 stainless steel
Handle: Black synthetic
Blade length: 240mm.
Blade thickness: 4mm.
Overall length: 360mm.
Balancing: Advanced 2.5 cm
Weight: 550g.
Sheath: Black Leather
Packaging: cardboard box with logos Case

Production type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel SanMai III VG-1
Blade treatment: Satin finish
Handle: Kraton
Blade length: 240mm.
Blade thickness: 8mm.
Total length: 370mm.
Balance: advanced, 3cm from the guard branch
Weight: 515g.
Sheath: black cordura
Packaging: blue cardboard case with cold steel logos
Notes: -

Cold Steel Espada Extra Large CPM‑S35VN is the ultimate high-performance design for those seeking an imposing yet elegant folding knife. Inspired by the tradition of the Spanish navaja, this modern “pocket sword” combines premium CPM‑S35VN steel with robust and refined construction: mirror-polished blade, G‑10 handle, and polished 7075 aluminum frame. Thanks to the patented Tri‑Ad Lock mechanism, the Espada XL offers exceptional shock resistance, withstanding loads up to 600 lb in real-world testing. Despite its 7.5″ blade (approx. 191 mm) and total length of 16.75″ (approx. 425 mm), the knife remains surprisingly pocketable and accessible — a no-compromise heavy-duty tool for collectors, outdoor enthusiasts, LE operators, and bold design lovers.

Intended use: Sport / Defense / Collection
Production type: Industrial
Country of origin: Taiwan
Blade: CPM‑S35VN stainless steel
Blade finish: Polished
Handle: Black G‑10 with polished 7075 aluminum reinforcements
Blade length: 7.5″ (approx. 191 mm)
Blade thickness: 4 mm (0.157″)
Closed length: 9.25″ (approx. 235 mm)
Total length: 16.75″ (approx. 425 mm)
Closed thickness: (to be verified)
Weight: 16 oz (approx. 454 g)
Locking mechanism: Tri‑Ad Lock
Clip: Tip-up, right/left
Packaging: (to be verified)
Notes: High-strength Tri‑Ad Lock mechanism; high-performance CPM‑S35VN blade.