Edizione limitata 5000 pezzi

- Elmo a grandezza naturale realizzato il metallo e cuoio con ottime finiture e dettagli.

- Supporto in legno d'appoggio e certificato d'autenticità inclusi

Under the command of Gandalf the WhiteTM the men of Gondor defended Minas Tirith, the Kingdom of Gondor, from within the city walls against the siege of Sauron. Greatly outnumbered by Sauron´s armies, the Gondorian infantry did not stand a chance in open war. Miraculously, with the use of their trebuchets and archers, the Gondorian army held their own until the nine Nazgûl, upon their fell beasts, swooped in destroying the trebuchets and forcing men to flee their posts. This distraction allowed the trolls to push their siege towers in, unleashing scores of orcs onto the walls of the city, and allowing the release of Mordor´s greatest weapon - Grond, a 150 foot iron battering ram shaped like a wolf. The gates of the city would not hold, driving the Gondorians back into the third level of the city. 

With much of the lower levels of Gondor in flames, it seemed as if it was on the verge of a catastrophic defeat, until suddenly the Riders of the Rohirrim appeared on the horizon, closing in and driving the armies of Mordor away from the city, thus ending the siege upon Gondor and entering into the Battle of the Pelennor fields. Although the Gondorians were technologically advanced compared to most races of Middle-earth, the design of the helm carries details reminiscent of Numenor. The barbut style helm - one piece, shoulder-length, and open-faced - finished off the suit of steel plate armor that a Gondorian infantryman wore. The smooth finish and flared bottom of the helm offered better neck protection, allowing blows to be deflected away from the body. Adorned on the sides of the helm are seabird wings, a familiar Gondorian motif. 

This authentically detailed helmet is a reproduction of the helmet prominently featured in The Lord of the Rings,TM The Return of the King presented by New Line Cinema. United® Cutlery Brands, industry leader in fine movie reproductions, has meticulously recreated the actual prop helmet using the finest grade materials and craftsmanship of the highest quality available. This intricately detailed actor´s scale helmet is wearable, and is completely handcrafted in solid iron with embossed decoration and a hand-antiqued finish. It features a genuine leather-lined interior with an individually serialized solid brass plate mounted on the inside back of the helmet to ensure authenticity. This adult collectible is strictly limited to 2000 pieces worldwide and each helmet is presented with a wood display stand adorned with "The One Ring" inscription and a brass medallion. 

LIMITED EDITION GONDOR INFANTRY HELM


HELM MATERIAL: Solid iron with embossed decoration and an antiqued finish, genuine leather-lined interior.
DISPLAY: 24.13 cm x 24.77 cm x 17.46 cm wood, burned-edge finish, gold silk screen, brass medallion. Hardware instructions included.

The new Zero Tolerance 0609 is a smaller, even more carry-ready version of the original Factory Custom 0606CF from ZT, RJ Martin, and Matt Martin. Like the original, it offers a clean, streamlined look yet also has highly detailed handle machining that adds both grip and visual impact. For even more visual “wow,” the 3D-machined handle is built of light-yet-strong titanium that ZT has anodized in an attractive bronze.

The 3.4-inch blade is CPM 20CV, which provides enhanced toughness and resistance to edge chipping. It also delivers superior hardness, corrosion resistance, and excellent edge retention. The drop-point blade has a two-tone finish: machined satin on the grinds with a stonewashed finish on the flats. The new 0609 opens manually with ZT’s KVT ball-bearing opening system and the handy flipper so it’s always ready when you want it.

Last—but certainly not least—you’ll notice the oversized See-Through Pivot (STP). Designed by RJ Martin, this unique, pivot is hollow in the center, letting you “see through” it. The See-Through Pivot adds another intriguing touch to this already-attractive knife.

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Satin
Handle: Titanium
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 191mm.
Thick when closed: 11.5mm.
Weight: 95g.
Opening: Carson Flipper system
Washers: in steel, with KVT ball bearings
Closure: FrameLock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by R.J. Martin & Matt Martin

Tommaso Rumici explains his knife: "Drawing the Octopus I wanted to create a knife that was versatile enough to be interesting for the various types of Fox customers: sporting, hunting and military, the result is, in my opinion, an excellent compromise between portability and performance: it will never be too big or heavy to have it with you in time of need. "

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel laminated SanMai 420J2 / VG10 to 60 / 62HRC
Blade treatment: Satin
Handle: Ziricote wood
Blade length: 115mm.
Blade thickness: 4mm.
Total length: 240mm.
Balancing: -
Weight: 170g.
Sheath: in leather
Packaging: cardboard box with Fox logos
Notes: design by Tommaso Rumici

Intended use: Tactical / Military / Collectibles

Type of production: Industrial
Lama production: Italy
Blade: stainless steel N690Co
Blade treatment: PVD
Handle: G-10
Blade length: 175mm.
Blade thickness: 5mm.
Length closed: -
Total length: 290mm.
Thickness when closed: -
Balancing: Set back
Weight: 262g.
Closure: -
Clip: -
Sheath: Kydex and Nylon, with M.O.L.L.E.
Packaging: Cardboard box with FKMD logos
Notes: Single edge version

Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Lama treatment: Ceracote
Handle: FRN
Blade length: 75mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 188mm.
Thick when closed: 18mm
Weight: 135g.
Closure: Liner Lock
Clip: steel
Sheath: -
Packaging: cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

Intended use: Gentleman / EDC

Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60-61 hrc
Lama treatment: Stonewashed
Handle: Titanium
Blade length: 64mm.
Blade thickness: 3mm.
Length closed: 107mm.
Total length: 155mm.
Thick when closed: 11mm.
Balancing: -
Weight: 83g.
Closure: Frame Lock
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended use: Gentleman / EDC

Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60-61 hrc
Lama treatment: Stonewashed
Handle: Titanium
Blade length: 64mm.
Blade thickness: 3mm.
Length closed: 107mm.
Total length: 155mm.
Thick when closed: 11mm.
Balancing: -
Weight: 83g.
Closure: Frame Lock
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended use: Gentleman / EDC

Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60-61 hrc
Lama treatment: Stonewashed
Handle: Titanium
Blade length: 64mm.
Blade thickness: 3mm.
Length closed: 107mm.
Total length: 155mm.
Thick when closed: 11mm.
Balancing: -
Weight: 83g.
Closure: Frame Lock
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended use: Machete

Blade: carbon steel 1095 56 / 58HRC
Country of production: USA
Finishing: Teflonatura
Handle: GFN-PA66 polymer
Blade length: 359mm.
Blade thickness: 5mm.
Total length: 498mm.
Balancing: advanced
Weight: 589g.
Sheath: cordura, with vertical belt attachments

Intended use: Tactical / Utility

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflon coated
Handle: Ultramid
Blade Length: 155mm.
Blade thickness: 5mm.
Total Length: 287mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 338g.
Sheath: kydex

Intended use: Collection

Type of production: one piece entirely handmade - number 82
Lama production: Italy
Blade: 440C stainless steel
Blade Treatment: Mirror Polishing
Handle: in giraffe bone
Blade length: 168mm.
Blade thickness: 6mm.
Length closed: -
Total length: 310mm.
Thickness when closed: -
Balancing: -
Weight: 386g.
Closure: -
Clip: -
Sheath: leather, handcrafted, hand-sewn
Package: -
Notes: Made entirely by hand

Intended use: Collection / Gentleman

Type of production: Artisan
Lama production: Japan
Blade: Cowry-Y stainless steel
Blade treatment: -
Handle: Mother of Pearl
Blade length: 87mm.
Blade thickness: 2.5mm.
Length closed: -
Total length: 195mm.
Thick when closed: 11mm.
Balancing: -
Weight: 82g.
Closure: Liner Lock
Clip: -
Sheath: -
Package: -
Notes: model entirely handmade by Master Koji Hara

In collaboration with Wander Tactical we decided to propose their new neck knife, the Raptor, in an exclusive satin-blade version that uses the famous SanMai japanese steel produced by Takefu Steel. For the central plate we have chose the CoS with 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 with 56 HRC for the two side plates in order to ensure high cutting capacity but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: Neck Knife / Collection

Type of production: handmade
Production Country: Italy
Blade: Full tang with japanese laminated (SanMai) 61.5HRC CoS stainless steel with cryogenic temper
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

This diving knife was originally developed for a military program.

Type of production: Industrial

Country of production: USA
Blade: stainless steel N690
Blade treatment: coated
Handle: made of plastic material (Rubberized Overmold)
Blade length: 89mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 72g.
Sheath: plastic material
Packaging: cardboard box with Benchmade logos
Note: -

Designed by Mike Wallace, the Immortal model was inspired by the shape of the famous Roman dagger

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Taiwan
Blade: CTS-XHP 60 / 61HRC stainless steel
Blade treatment: Satin
Handle: G10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 120mm.
Total length: 220mm.
Thick when closed: 10mm.
Weight: 168g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with Cold Steel logos
Note: -

Intended use: Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in steel 1095 58 / 60HRC
Blade treatment: Black River Wash
Handle: Tan Canvas Micarta
Blade length: 240mm.
Blade thickness: 5mm.
Total length: 295mm.
Balancing: on the guard branch
Weight: 315g.
Sheath: in black leather
Packaging: Transparent plastic bag
Notes: Emergency whistle - Design by Anton Du Plessis

The Silent Hero was designed by Anton Du Plessis, who is the Chief of Operations for the Specialized Interdiction Unit of the Silent Heroes Foundation. His task is to combat the poaching crisis in South Africa. This knife has to be durable, versatile, and able to fill Anton's needs in the field, which affected the design of the blade and the handle. It will definitely hold up to hard use. And with a weight of only 12 oz, you'll be able to use the knife without getting fatigued too quickly.

There is a lanyard hole in the handle along with another in the finger guard. This is meant to allow the user to add a safety cord in order to improve the grip on the handle, which already allows for a solid grip. The finger-guard hole can also be used to assist in lashing to a spear when the situation warrants it.

There is a finger choil up into the blade to give you the ability to choke up and execute precise, fine cuts. The drop point design makes this knife great for slicing and gives the tip extra strength. So this knife will be a great knife for bushcraft, survival, and tactical purposes.

The black leather sheath is durable and looks great paired with this knife. The Silent Hero is held in place with a single snap loop that curls around the finger guard.

The Silent Hero is a great design and a very versatile blade. It is large enough that it can be used to chop, but is also still small enough to complete most of the tasks you can do or want to do with a smaller knife.

TOPS Knives is a proud supporter and Corporate Sponsor of the Silent Heroes Foundation.

Intended use: collection / sport

Type of production: Industrial
Country of production: Taiwan
Blade: 440C steel
Blade treatment: satin finish
Handle: in micarta, with stainless steel guard
Blade length: 178mm.
Blade thickness: 4.6mm.
Total length: 305mm.
Weight: 295g.
Sheath: in black leather
Packaging: gift box with warranty certificate and microfiber cleaning cloth
Notes: Numbered and limited edition of 1999 copies - Design by John H. Davis

Intended use: tactical / sports

Type of production: Industrial
Country of production: Taiwan
Blade: SK-5 carbon steel
Blade treatment: Black Tuff-Ex painting
Handle: Kray-Ex (Kraton)
Blade length: 155mm.
Blade thickness: 5mm.
Total length: 275mm.
Balancing: on the guard branch
Weight: 230g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos

The stone for grinding AP-2455 is equipped with a grain 80, the best tool to smooth depressions or protuberances on the surface of the stones, of the compact choruses and to round off the irregular edges.

Country of production: Japan
Dimensions: 17 x 6 x 1.7 cm
Grain: # 80

Intended use: Tactical / Sports

Type of production: industrial
Blade: 14C28N stainless steel
Blade treatment: Stone Washed
Blade production: China
Handle: G10 and stainless steel
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 215mm.
Handle thickness: 11.5mm.
Weight: 155g.
Closure: Frame Lock
Clip: removable, stainless steel
Notes: Opening via the Carson Flipper system

In collaboration with "Wander Tactical" We decided to bring their EDC, the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Occupation: EDC / Light Utility / All Round

Type of production: Custom
Country of production: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin Raw
Handle: Paracord
Blade length: 82mm.
Blade thickness: 6.8mm.
Overall length: 200mm.
Balancing: backward
Weight: 215g.
Sheath: Kydex, compatible with tek-lok attacks (not supplied) or used as a neck knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: black
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Taiwan
Blade: CTS-XHP 60 / 61HRC stainless steel
Blade treatment: Satin
Handle: G10
Blade length: 102mm.
Blade thickness: 3.5mm.
Length closed: 142mm.
Total length: 244mm.
Thick when closed: 10mm.
Weight: 136g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with Cold Steel logos
Note: -

The Nitecore NCP30 tactical sheath is a robust, multifunctional product, ideal for torches and multipurpose.
The scabbard also offers a small side compartment for carrying pens and penlights.
Made of 900D Cordura Mil-Spec Nylon, the ncp30 sheath can be easily mounted on a belt or
other MOLLE systems.

Compatible torch models:
EA21 EC20 EC25 MT25 MT2C MT20C MT06 P20 P20UV P10 P12 SRT5 MH2C MH10 MH12

Measurements:

Item weight: 54.4 g
Product dimensions: 8.4 x 4.3 x 2.5 cm

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model keeps all the features of the BF0 updated with the new High Speed Razor Opening opening system. Available in the following versions: BF0 R CD Desert with stone washed blade and HCS and BF0 R CD Stone Washed with stone washed blade and black grip.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 55mm.
Blade thickness: 2.5mm.
Length closed: 85mm.
Total length: 140mm.
Weight: 53g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy - Maniago (PN)
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Satin
Grip: G10 with steel liners
Blade length: 84mm.
Blade thickness: 3.4mm.
Length closed: 116mm.
Total length: 200mm.
Weight: 155g.
Closure: Back Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Fox FKMD logos
Notes: Skull Detachable tapered crasher placed on the shank

Intended use: Tactical / Light Utility
Type of production: Industrial
Country of production: Maniago - Italy
Blade: full tang in stainless steel N690Co 58HRC
Blade treatment: Stonewashed
Handle: G10
Blade length: 107mm.
Blade thickness: 4mm.
Total length: 230mm.
Balancing: set back
Weight: 195
Sheath: in Kydex, by Radar
Packaging: cardboard box with Maserin logos
Notes: L.E.O. is the acronym of Law Enforcement Only - designed by Tommaso Rumici

Intended use: Tactical / Light Utility
Type of production: Industrial
Country of production: Maniago - Italy
Blade: full tang in stainless steel N690Co 58HRC
Blade treatment: Stonewashed
Handle: G10
Blade length: 107mm.
Blade thickness: 4mm.
Total length: 230mm.
Balancing: set back
Weight: 195
Sheath: in Kydex, by Radar
Packaging: cardboard box with Maserin logos
Notes: L.E.O. is the acronym of Law Enforcement Only - designed by Tommaso Rumici

Intended use: Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in steel 1095 58 / 60HRC
Blade treatment: Black River Wash
Handle: Tan Canvas Micarta
Blade length: 120mm.
Blade thickness: 4.5mm.
Total length: 248mm.
Balancing: Set back
Weight: 270g.
Sheath: kydex, with vertical belt attachment
Packaging: Transparent plastic bag
Notes: Emergency whistle - Design by Leo Espinoza

Intended use: Tactical / Military

Type of production: Industrial
Lama production: USA
Blade: CPM-S35VN 59 / 61HRC stainless steel
Lama treatment: Black
Handle: Aluminum Green
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 13mm.
Balancing: -
Weight: 110g.
Closure: Liner Lock
Clip: Removable and multiposition, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe opening system

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: CTS-BD1 stainless steel
Blade treatment: Satin
Handle: FRN Fiberglass Reinforced Nylon with stainless steel liner
Blade length: 33mm.
Blade thickness: 3mm.
Length closed: 57mm.
Total length: 90mm.
Thick when closed: 6.8mm
Weight: 34g.
Closure: Liner Lock
Clip: -
Packaging: Cardboard box with Spyderco logos
Notes: Design by Darriel Caston

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 61 / 62HRC
Blade treatment: Stone Washed
Grip: titanium folders and G-10 grips
Blade length: 94mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 206mm.
Thick when closed: 15mm.
Weight: 132g.
Closure: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box with Fantoni logos
Notes: Opening via the Carson Flipper system - Design by William W. Harsey

Destination of use: sport / collection

Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -

Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

Destination of use: sport / collection

Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -

Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

Destination of use: sport / collection

Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -

Intended use: Hunting / Sports

Type of production: Craft
Lama production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: -
Total length: 240mm.
Thickness when closed: -
Balancing: 2 cm back
Weight: 238g.
Closure: -
Clip: -
Sheath: in leather
Packaging: cardboard box with WRKT logos
Note:

In collaboration with "Wander Tactical" We decided to bring their EDC, the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: EDC / Light Utility / All Round

Type of production: Artisan
Lama production: Italy
Blade: integral, Japanese rolled stainless steel (San Mai) with 61.5HRC Crystalline-hardened CoS cutting edge
Lama treatment: Raw Satin
Handle: Paracord
Lam length: 90mm.
Blade thickness: 6.8mm.
Total length: 203mm.
Balancing: set back
Weight: 240g.
Sheath: Kydex, thermoformed, compatible with tek-lok attachments (not supplied) or usable as neck knife
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: in G10 Black
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 200mm.
Thick when closed: -
Balancing: 1 cm backward
Weight: 106g.
Closing: -
Clip: -
Sheath: in kydex with flintlock
Packaging: Wooden box with WRKT logos
Note:

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: in G10 Orange
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 200mm.
Thick when closed: -
Balancing: 1 cm backward
Weight: 106g.
Closing: -
Clip: -
Sheath: in kydex
Packaging: Wooden box with WRKT logos
Note:

Although iron was a tougher material than bronze it would frequently bend. Damascus, or pattern welded steel, was used to make the blade strong enough to withstand the rigors of combat. Early Viking swords were forged from layers of iron interwoven with strands of steel to produce a very tough sword. This sword is based on an original circa 850-900 AD sword discovered in Finland. The Damascus Viking Sword is made of high carbon Damascus steel. The blade is polished with the fuller acid etched to bring out the beautiful Damascus pattern. The pommel and crossguard are made of solid steel and the grip is leather wrapped wood. Includes a matching wood scabbard with a black leather covering and steel mounts. A very nice example of a true Viking sword.

Blade: 1070 carbon steel damask battle ready
Handle: in leather and metal
Total length: 91.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard 1304g.
Weight with no sheath 938g.
Sheath: wood covered with leather with metal fittings
Note: -

Blade: 1050 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard: 1404g.
Sheath: leather with bronze fittings
Note: -

Pfeil carving knives bag in fabric

4 pieces

- Schaller knife SchG

- Schaller knife SchK

- Canard carving knife CaG

- Canard carving knife CaK

Old Bear ™ is the new and exclusive line of pocket knives produced by the maniago company Antonini. This series is characterized by simple and ergonomic shapes, celebrating the 90th anniversary of the company foundation (1925-2015) and is realized by engaging traditional production techniques with a high level of manual skills.

Type of production: semi-handmade
Country of production: Italy
Blade: 420 stainless steel to 54/56 HRC
Handle: in American walnut
Blade length: 95mm.
Blade thickness: 2mm.
Length closed: 120mm.
Thick when closed: 22mm.
Total length: 215mm.
Weight: 91g.
Closing: in brass, with locking both in opening and closing

The sleeves are made of American oleate walnut wood while the blade is made of stainless steel, sharpened and manually picked on the stone by skilled craftsmen hands.

Being a model without a return spring, the blade is fixed to the handle by a solid brass safety ring with a special locking device (patent pending n.1187282 filed again in 1985 by the Todesco company of Maniago, which is active partner of this project) can be activated both in open position and in closed position.

This product was built by subjecting the necessary raw materials to artisanal treatments that make each single knife unique, original and not standardized. Any superficial irregularities represent the confirmation of our manual workings and do not compromise the operational functionality of the tool.

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Black TiNi
Handle: Black TiNi and G10 3D stainless steel
Blade length: 8.3mm.
Blade thickness: 2.7mm.
Length closed: 111mm.
Total length: 191mm.
Thick when closed: 9.7mm.
Weight: 131g.
Opening: Carson Flipper and SpeedSafe system
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Kershaw logos
Note: -

Designed for intensive use in real-life situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Craft
Lama production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: in paracord
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 200mm.
Thickness when closed: -
Balancing: 1 cm back
Weight: 94g.
Closure: -
Clip: -
Sheath: in kydex
Packaging: cardboard box with WRKT logos
Note:

Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 175
Blade thickness: 5mm.
Length closed: -
Total length: 295mm.
Thick when closed: -
Balancing: 0.5 cm advanced
Weight: 320g.
Closing: -
Clip: -
Sheath: leather
Packaging: Wooden box with WRKT logos
Notes: flintlock housed in a scabbard pocket

Designed for heavy use in real survival situations these also make excellent camp, hunting, backpacking or utility knives.  The deep finger choil protects fingers while applying pressure whittling, cutting or chopping.  Atop the blade is a notch for efficient striking of a ferro rod and one is included with each knife.  Features a polished stainless steel divot for use with a fire bow.  This is a well-designed, great looking, and robust knife intended for serious work.

Blade Length:    5”

Overall Length:  10”

Blade Steel:       CPM S30V

Hardness:          59 HRC

Sheath:              Leather

White River Guarantee: If you are not 100% satisfied with this knife, send it back for free repair or replacement.

Designed for heavy use in real survival situations these also make excellent camp, hunting, backpacking or utility knives.  The deep finger choil protects fingers while applying pressure whittling, cutting or chopping.  Atop the blade is a notch for efficient striking of a ferro rod and one is included with each knife.  Features a polished stainless steel divot for use with a fire bow.  This is a well-designed, great looking, and robust knife intended for serious work.

Intended use: Hunting / Sports

Type of production: Craft
Lama production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 225mm.
Thickness when closed: -
Balancing: 2 cm back
Weight: 172g.
Closure: -
Clip: -
Sheath: in leather
Packaging: cardboard box with WRKT logos
Notes: flask housed in a pocket of the sheath

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Blackwash
Grip: G10 and Carbon Fiber
Blade length: 70mm.
Blade thickness: 2.7mm.
Length closed: 103mm.
Total length: 171mm.
Thick when closed: 9.7mm.
Weight: 54g.
Opening: Carson Flipper system
Washers: brass, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Notes: Design by Jens Anso

The PUP (Phone Utility Pouch) model has an easy-access external pocket designed to safely store and transport mobile phones or radios.

The unique design allows you to extract the mobile phone / radio with a single gesture. The lateral elastic retention keeps the cellphone or radio in place securely. There is also a main zippered compartment with a mesh pocket to organize everything at its best.

The PUP is supplied with two TacTie PJC3 rear clips made of polymers designed for the modular attachment to any surface compatible with MOLLE type systems such as ATLAS or PALS.

* Total dimensions: 8.9x7.6x15.2cm
* Front pocket: 8.9x4.5x13.3 / 17.8 (max) cm
* Main Bought: 8.9x5.1x15.2
* Weight: 130g

GENERAL TECHNICAL CHARACTERISTICS OF MAXPEDITION PRODUCTS

* 1000-denier ballistic nylon resistant to water and abrasion
* DuPont Teflon Fabric Protector treatment to make the Nylon resistant to dirt and dust
* YKK high resistance hinges
* Stress points joined together with double, triple, square and X stitching
* UTX-Duraflex Nylon buckles to guarantee maximum silent opening and closing
* Nylon stitching with very high tensile strength
* Vulcanized padding with polysulfides of Robac AS-100 xacenic acid to guarantee maximum shock absorption
* Internal seams taped and vulcanized
* Drawstring and cordages made of military grade paracord

MAINTENANCE

* Wipe a clean and damp cloth on the surface and wait for the product to dry naturally.
* Do not machine wash
* Do not dry clean
* Do not use detergents or bleaches
* Do not iron

The Valence (pronounced "VAY-LENCE") is a CCW technology (concealed carry weapon) shoulder bag with adjustable belt for right or left side transport. The backpack can easily be transformed from a shoulder bag and vice versa. It has a padded main compartment, with dual access, closed by a double zipper equipped with lockable sliders, designed to accommodate laptops / tablets up to 13 inches. It also has a CCW back compartment with a double hook security lock.

GENERAL TECHNICAL CHARACTERISTICS OF MAXPEDITION PRODUCTS

* 1000-denier ballistic nylon resistant to water and abrasion
* DuPont Teflon Fabric Protector treatment to make the Nylon resistant to dirt and dust
* YKK high resistance hinges
* Stress points joined together with double, triple, square and X stitching
* UTX-Duraflex Nylon buckles to guarantee maximum silent opening and closing
* Nylon stitching with very high tensile strength
* Vulcanized padding with polysulfides of Robac AS-100 xacenic acid to guarantee maximum shock absorption
* Internal seams taped and vulcanized
* Drawstring and cordages made of military grade paracord

VALENCE FEATURES

* Internal volume of 10L
* Overall dimensions of 27.9x14x36.8cm
* Front pocket of 24.8x5.1x35.6cm
* Main compartment of 24.1x7.6x36.8cm
* CCW compartment of 24.1x35.6cm
* Weight of 816g.
* Ambidextrous single shoulder bag
* Removable belt with double quick release
* Closure with bidirectional zip closable with padlock

MAINTENANCE

* Wipe a clean and damp cloth on the surface and wait for the product to dry naturally.
* Do not machine wash
* Do not dry clean
* Do not use detergents or bleaches
* Do not iron

Intended Use: Tactical/Military

Production Type: Industrial
Blade Manufacturing: USA
Blade: Stainless steel CPM-20CV
Blade Treatment: Black DLC
Handle: Titanium with Black DLC and G-10 treatment
Blade Length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thickness when closed: 12mm.
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multiposition, Stainless Steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - Opening on KVT Ball Bearing System - Opening by Carson Flipper System

The new Nitecore NL1834R 18650 battery is a revolutionary battery designed with a built-in micro-USB charging port making charging easier than ever! No more need for an extra charger as this battery can be charged directly using a standard micro-USB charging cable (sold separately). Simply plug the battery into an available power source and a red indicator light under the + pole will turn green upon completion. Alternatively, these batteries can still be charged on an external charger if desired. The NL1834R batteries are designed for powering high drain devices such as high-output flashlights, lanterns, headlamps, and bike lights, as well as a variety of other appliances and devices. With built in smart charging circuitry built and other integrated safety features through-out, this battery will safely work in the majority of button-top compatible devices.

Features & Specifications:
Type: Nitecore NL1834R 18650 3.7V Protected Li-ion rechargeable battery
Capacity: 3400mAh
Voltage: 3.7V
Output: 12.24Wh
USB Charging Voltage: 5V
USB Charging Current: 800mA (Maximum)
Chemistry: Lithium-ion
Weight: 1.52oz (47.3g)
Length: 2.68in (68mm)
Diameter: 0.72in (18.3mm)
Protected: Internal PCB protection prevents under-voltage at 2.5V and over-voltage at 4.25V
Recharge: up to 500+ cycles
Red & Green charging indicator LED's
Microporous barrier and pressure release valves help protect the battery and prevent damage caused by rapid expansion & combustion
12 Month Warranty Period

Panthera is a new folding that retains all the features of the T-Razor, from which it draws inspiration, with the difference that the dorsal part of the blade goes down towards the tip, like the wharncliff blades. The knife presents the new Razor opening high speed opening system.

Intended use: Sports / Tactical

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal Anodised aluminum
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 165mm.
Total length: 247mm.
Weight: 130g.
Closure: Liner Lock
Clip: absent
Sheath: absent
Note: -

Viper - Kyomi by Vox - Titanium and G10 Orange - V5940GO - knife

Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Titanium and Green G10
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 107mm.
Overall length: 184mm.
Thick when closed: 18mm.
Balancing: -
Weight: 128g.
Closure: Frame Lock with steel swing
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper Voxnaes

Purpose of use: Sportsman / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Satin
Handle: Titanium with anodized titanium spacer
Blade Length: 85mm.
Blade thickness: 4mm.
Closed length: 110mm.
Overall length: 192mm.
Closure thickness: 14mm.
Weight: 146g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Stainless Steel Liner Lock 1.4116
Clip: Anodized titanium, made from full, removable
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio Silvestrelli

Purpose: sport / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Satin
Handle: carbon fiber with anodized titanium spacer
Blade Length: 85mm.
Blade thickness: 4mm.
Closed length: 110mm.
Overall length: 192mm.
Closure thickness: 14mm.
Weight: 94g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Stainless Steel Liner Lock 1.4116
Clip: Anodized titanium, made from full, removable
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio Silvestrelli

Purpose: sport / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Stone Washed
Handle: G10 with anodized titanium spacer
Blade Length: 85mm.
Blade thickness: 4mm.
Closed length: 110mm.
Overall length: 192mm.
Closure thickness: 14mm.
Weight: 102g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Stainless Steel Liner Lock 1.4116
Clip: Anodized titanium, made from full, removable
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio Silvestrelli

Stainless steel fish scaler by Kai

The Kai fish scaler is made from one piece of high-grade steel and like this very stable.

The Kai fish scaler is delivered with a plastic cover, which allows collecting the removed scales. Serrated teeth remove scales while ensuring less mess than traditional fish scaling with a knife Scales are removed by teeth, while leaving flesh intact; with less effort and less mess

Made from stainless steel for strength and to prevent corrosion

Dishwasher safe

Total length 21 cm.

Handle length 14 cm.

Intended use: Tactical / Utility

Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade Treatment: Black Coating
Handle: -
Blade Length: 98mm.
Blade thickness: 3.1mm.
Total length: 200mm.
Balance: advanced, 1 cm from the lower guard branch
Weight: 68g.
Sheath: ABS, neck, compatible M.O.L.L.E.
Packing: Cardboard box with Ka-Bar logos
Note: -

Purpose of use: Outdoor / Utility

Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade Treatment: Satin
Handle: Zytel interchangeable in Blue Reptile or Purple Dolla Holla
Blade Length: 116mm.
Blade thickness: 4.8mm.
Overall length: 228mm.
Balance: backward, 1 cm from the lower guard branch
Weight: 181g.
Sheath: in leather
Packing: Cardboard box with Ka-Bar logos
Notes: Design by Mike Snody - Schmuckatelli Coat Powder Coat - Coordinated Paracord