collection knives
-
Puma - Cougar '80s Vintage NOS Full Set - 154CM & Jacaranda Wood - 12 6500 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Full set, NOS (new old stock / stock fund).
* Condition: Brand new, never taken out of wooden box.
* Commercially available: Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIconic knife produced by Puma and dating back to the late 1980s, featuring a then very modern line and a steel that was very advanced for the time (154CM).
Intended Use: Collection / Vintage / Tactical
Type of production: Semi-industrial
Country of Production: Germany
Blade: Stainless steel 154CM
Blade finish: Satin finish
Handle: integral, stainless steel and Brazilian Jacaranda wood
Blade length: 165mm.
Blade thickness: 5.5mm.
Total length: 290mm.
Balance: backward
Weight: 320g.
Sheath: leather
Packaging: wooden case
Notes: 1980s Vintage knife - NOS (new old stock) - Brand newPU-COUJHW-CP€901.64Only 1 left -
ExtremaRatio - MPC Desert Warfare - 2014 Full Set - PRIVATE COLLECTION - Knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 2014 knife overall in near new, unused condition, some minor marks on metal parts given by age
* Commercially available Discontinued.
* Sharpening: Factory sharpened, never used for cutting.
* Marks on blade: No
* Marks on handle: Some discoloration of laser engravings given by age.
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Multirole
Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade Finish: Desert Warfare
Handle: Anticorodal with stainless steel spacer
Blade length: 115mm.
Blade thickness: 6.3mm.
Total length: 260mm.
Weight: 245g.
Lock system: Back Lock with additional safety pin
Packaging: cardboard box with Extrema Ratio logos
Notes: Previously purchased discontinued specimen from a private collection. Full set, in near-new conditionER-MPCDW-CP -
ExtremaRatio - Frame Rock Titan - Black DLC - folding knife
The Extrema Ratio Frame Rock is a new knife, based on the Ti-Rock project, a successful frame-lock knife made by Extrema Ratio in 2016 exclusively for Coltelleria Collini.
The Extreme Ratio Frame Rock is characterized by the titanium handle that offers great resistance while being very light. The integrity of the frame-lock locking system is guaranteed against wear by an easily replaceable hardened steel insert.
Unlike its drop-point predecessor, the Rock frame has a spearpoint blade 75 mm long, 6.0 mm thick, equipped with fuller for further lightening. The blade is made of Bohler N690 steel, heat treated to a hardness of 58 HRC. The same is available in black finish with DLC or satin finish.
To make the opening even more fluid and free of uncertainties, the blade rotates on ball bearings. This mechanism allows the user to adjust the force necessary to release the blade from the closed position.
The shape of the reversible clip allows a hidden port in the pocket, making the knife not visible from the outside. The large, solid handle and the well-proportioned blade allow this knife to tackle demanding tasks. Frame Rock weighs less than 200g, making it somewhat light for such a sturdy knife. It is supplied inside an ABS box.
Intended use: collection / CQD
Type of production: industrial
Blade: in N690Co stainless steel
Blade treatment: Black DLC
Country of production: Italy
Handle: in Titanium, machined from solid, with integral Frame Lock closure system with removable hinged and safe made of stainless steel
Blade length: 75mm.
Blade thickness: 6.3mm.
Total length: 181mm.
Weight: 193g.
Clip: stainless steel, reversible, deep pocket type and with tip up port
Notes: Conical Skull Crasher inserted in the shank
Box: in ABS with Extrema Ratio logosER-FRTI-BK -
ExtremaRatio - Frame Rock Titan - Blue Satin - folding knife
The Extrema Ratio Frame Rock is a new knife, based on the Ti-Rock project, a successful frame-lock knife made by Extrema Ratio in 2016 exclusively for Coltelleria Collini.
The Extreme Ratio Frame Rock is characterized by the titanium handle that offers great resistance while being very light. The integrity of the frame-lock locking system is guaranteed against wear by an easily replaceable hardened steel insert.
Unlike its drop-point predecessor, the Rock frame has a spearpoint blade 75 mm long, 6.0 mm thick, equipped with fuller for further lightening. The blade is made of Bohler N690 steel, heat treated to a hardness of 58 HRC. The same is available in black finish with DLC or satin finish.
To make the opening even more fluid and free of uncertainties, the blade rotates on ball bearings. This mechanism allows the user to adjust the force necessary to release the blade from the closed position.
The shape of the reversible clip allows a hidden port in the pocket, making the knife not visible from the outside. The large, solid handle and the well-proportioned blade allow this knife to tackle demanding tasks. Frame Rock weighs less than 200g, making it somewhat light for such a sturdy knife. It is supplied inside an ABS box.
Intended use: collection / CQD
Type of production: industrial,
Blade: in N690Co stainless steel
Blade treatment: Satin finish
Country of production: Italy
Handle: in Titanium, machined from solid, with integral Frame Lock closure system with removable hinged and safe made of stainless steel
Blade length: 75mm.
Blade thickness: 6.3mm.
Total length: 181mm.
Weight: 193g.
Clip: stainless steel, reversible, deep pocket type and with tip up port
Notes: Conical Skull Crasher inserted in the shank
Box: in ABS with Extrema Ratio logosER-FR-BS -
Medford Knife and Tools - NAV-H Fixed - Bead Blasted D2 & Green G10 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: overall in good condition
* Commercially available: discontinued
* Sharpening: professionally re-sharpened.
* Marks on blade: small abrasions given by insertion in Kydex sheath.
* Marks on handle: small abrasions in a couple of places.
* Box: Nylon pouch.
* Scabbard: made of Kydex
* Manuals, Certificates and Warranties: missing.
* Checked and Certified by our in-house laboratoryIntended Use: Tactical/Collection
Production type: MidTech
Country of manufacture: USA
Blade: full tang, D2 steel
Blade finish: microbead blasting
Handle: G10 green
Blade length: 95mm.
Blade thickness: 6.5mm.
Total length: 230mm.
Weight: 368g.
Sheath: kydex, thermoformed, with Tek Lok type attachment
Packaging: nylon pouch, with zipper closure and Medford logos
Notes: designed and built by Greg MedfordAP10517 -
Fabrizio "Silvester" Silvestrelli - Custom CSFK - Black RWL34 - handmade knife
Knife handmade, designed and produced in only 10 copies (5 CPM-S30V steel sandblasted and 5 in RWL-34 steel coated TIN) from the known knifemaker Fabrizio "Silvester" Silvestrelli in collaboration with Collini Cutlery.
Further the CSFK feature is the ability to change at will the manicatura the same between the grips included in the package: Micarta Loveless, G10 or Black Paracord Camouflage. The knife can also be deprived of the grips to be used as a spearhead or to minimize the footprint thickness.
Intended use: tactical / collection
Type of production: made entirely by hand, limited and numbered
Production Country: Italy
Blade: stainless steel full-tang RWL-34 60 / 61HRC
Surface treatment: surface coating TIN "Advance Top" - Multi-layer aluminum and amorphous carbon titanium - Microhardness (HV 0.05): 3500 Vickers
Handle: Micarta Loveless / G10 / Paracord
Blade length: 135mm.
Blade Thickness: 5.5mm.
Overall length: 250mm.
Weight: 225g.
Sheath: Cordura, made in the USA, made by Blackhawk
Notes: knife made by the cutler Fabrizio "Silvester" Silvestrelli in only 5 specimens - certificate of guarantee and authenticity - key to remove the grips9005 -
Fabrizio "Silvester" Silvestrelli - Custom CSFK - CPM-S30V - handmade knife
Knife handmade, designed and produced in only 10 copies (5 CPM-S30V steel sandblasted and 5 in RWL-34 steel coated TIN) from the known knifemaker Fabrizio "Silvester" Silvestrelli in collaboration with Collini Cutlery.
Further the CSFK feature is the ability to change at will the manicatura the same between the grips included in the package: Micarta Loveless, G10 or Black Paracord Camouflage. The knife can also be deprived of the grips to be used as a spearhead or to minimize the footprint thickness.
Intended use: tactical / collection
Type of production: made entirely by hand, limited and numbered
Production Country: Italy
Blade: full tang CPM-S30V Stainless Steel 60 / 61HRC
Surface treatment: glass micropallinatura
Handle: Micarta Loveless / G10 / Paracord
Blade length: 135mm.
Blade Thickness: 5.5mm.
Overall length: 250mm.
Weight: 225g.
Sheath: Cordura, made in the USA, made by Blackhawk
Notes: knife made by the cutler Fabrizio "Silvester" Silvestrelli in only 5 specimens - certificate of guarantee and authenticity - key to remove the grips9006 -
ExtremaRatio - Ti-Rock Satin Limited Edition - Laminated CoS & Blue Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Like new, never taken out of its packaging.
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Coltelleria Collini exclusive - Available in only 33 numbered examples on blade and box
Intended use: collection / EDC / CQDType of production: industrial, limited
Blade: Japanese laminated stainless steel (San Mai) with cryogenically hardened 61.5HRC CoS cutting edge; with double concave shank in the strong of the blade
Blade treatment: satin finish
Country of manufacture: Italy
Handle: made of Titanium, machined from solid, with integral Frame Lock system with removable casement and safety made of stainless steel
Blade length: 75mm.
Blade thickness: 6.3mm.
Total length: 180mm.
Weight: 186g.
Clip: stainless steel, reversible, deep pocket type and with tip up port
Notes: tapered Skull Crasher engaged in the tang - Limited and numbered edition of only 33 pieces serialized on the blade and box
Box: cardboard, numbered, with ExtremaRatio and Coltelleria Collini logosTIROCK-C-BL-CP -
Randall Knives - Model 19-4 - Bushmate Stag Horn - PRIVATE COLLECTION - knife
This Model 19-4 Bushmaster from Randall Made Knives features a clip point blade with satin finish, false counterbore and serrated thumb rest. The handle consists of nickel silver through-guard and recoil pad with colored micarta spacers and monolithic curved deer antler grip. Includes original "Model A" leather sheath with belt loop and sharpening stone.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryIntended use: hunting
Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: deer antler with through-guard and nickel silver recoil pad
Blade length: 115mm.
Blade thickness: 5.5mm.
Total length: 228mm.
Balance: set back
Weight: 281g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collectionAP-RK-194SH -
Wander Tactical - One of a Kind Dagger - Unsharpened - Ice Brush & Micarta Black - Custom Knife
Intended Use: Collection
Type of production: Handcrafted - one of a kind
Country of Production: Italy
Blade: ** NOT SHARPENED ** steel D2 at 59/60HRC
Blade treatment: Ice Brush
Handle: Micarta
Blade length: 170mm.
Blade thickness: 5.5mm.
Total length: 298mm.
Balance: advanced
Weight: 332g.
Sheath: kydex, multi-position, with MOLLE-compatible belt hooks
Packaging: unpacked - supplied with certificate of originality and Wander Tactical warranty
Notes: unsharpened knife, free sale and free possessionWT-DAIB-BK -
Wander Tactical - Tenebris Pilot Clip Point Knife - Ice Brush & Micarta Black - Custom Knife
Intended use: Collection
- Type of production: Handcrafted
- Country of production: Italy
- Blade: D2 steel at 59/60HRC
- Blade treatment: ICE BRUSH
- Handle: Micarta
- Blade length: 160mm
- Blade thickness: 5.5mm
- Total length: 275mm
- Balance: Advanced
- Weight: 330g
- Sheath: Kydex, multi-position, with MOLLE-compatible belt attachments
- Packaging: No packaging - supplied with Wander Tactical authenticity certificate and warranty
- Notes: -
WT-CPCP-BM -
Wander Tactical - Centuria Pilot Clip Point - Raw & Micarta Brown - Custom Knife
Intended Use: Collection
Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: RAW
Handle: Micarta
Blade length: 160mm.
Blade thickness: 5.5mm.
Total length: 275mm.
Balance: advanced
Weight: 330g.
Sheath: kydex, multi-position, with MOLLE-compatible belt hooks
Packaging: unpacked - supplied with certificate of originality and Wander Tactical warranty
Notes: -WT-CPCP-MB -
ExtremaRatio - A.S.F.K. X Brigatae Anniversarium Limited Edition - ASFK - knife
Extrema Ratio, on the occasion of the 10th anniversary of COM.FO.SE., presents a version in a limited series of only 70 pieces, "A.S.F.K. X BRIGATAE ANNIVERSARIUM LIMITED EDITION".
A.S.F.K. (Assault Special Forces Knife) is the dagger dedicated to and acquired by the Army Special Forces Command. This model recalls the tradition of arditism and the bloody trench battles punctuated by assaults with a bladed weapon. A.S.F.K. is a trench knife reimagined with a modern twist.
A.S.F.K. X BRIGATAE ANNIVERSARIUM LIMITED EDITION comes in an IP67-certified watertight Polypropylene technical case with pressurization valve that is weatherproof, dustproof and shockproof. Inside is a metal plate with the numbering of the series limited to only 70 pieces.
Intended Use: Tactical/Collection
Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade finish: Burnishing Geotech Camo
Handle: Forprene
Blade Length: 162mm.
Blade thickness: 6.3mm.
Overall length: 289mm.
Balance: backward
Weight: 413g.
Sheath: cordura, M.O.L.L.E. compatible.
Packaging: thermoplastic collectible case with logos
Notes: limited and numbered edition made in only 70 piecesER-ASFKLE -
Microtech - Currahee - S/E Green 102-1GR - PRE-OWNED - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: January 2014 production, previously purchased.
* Condition: Brand new
* Commercially available: Discontinued and no longer available.
* Sharpening: Factory.
* Marks on blade: No
* Marks on handle: Small abrasions given by contact with scabbard.
* Box: Present and original
* Scabbard: Present and original
* Manuals, Certificates and Warranties: Warranty and maintenance sheet.
* Checked and Certified by our in-house laboratory
Intended Use: Heavy Utility
Production type: Midtech
Country of Production: USA
Blade: full tang in D2 steel at 59/60HRC
Blade treatment: Gunkote Green
Handle: polymer
Blade length: 115mm.
Blade thickness: 5.2mm.
Total length: 250mm.
Balance: advanced
Weight: 370g.
Sheath: polymer, with M.O.L.L.E. compatible multi-position attachments.
Packaging: cardboard box with Microtech logos, Maintenance and warranty information
Notes: produced in January 2014 - previously purchased - brand newMCT1021GR -
Medford Knife and Tool - Praetorian Genesis T - S45VN Tumbled DP, Blue Warp Speed Handles - MK0294 - knife
Who could have imagined that the Praetorian would conquer the knife world and become a design icon? That was the predetermined size of the design, but someone still wasn't okay with it...so here is the Praetorian Genesis, designed for the for the middle-of-the-road fanatics The Praetorian Genesis is a little smaller than the original, but retains more of a tough-guy look than ever before not scaring off the fearful, but still big enough for any task!
Intended Use: Sporty / EDC
Type of production: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Dual Tone Tumbled & Satin
Handle: Blue Anodized Titanium with "Silver Peaks Warp Speed" artwork
Blade Length: 92mm.
Blade thickness: 5.5mm.
Length closed: 118mm.
Total length: 202mm.
Thickness when closed: 13mm.
Weight: 190g.
Closure system: Frame Lock
Clip: satin-finished titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK0294TD -
Medford Knife and Tool - Praetorian Genesis T - S45VN Tumbled Tanto, Violet & Brushed Silver Handles - MK0294 - knife
Who could have imagined that the Praetorian would conquer the knife world and become a design icon? That was the predetermined size of the design, but someone still wasn't okay with it... so here is the Praetorian Genesis, designed for the for the middle-of-the-road fanatics The Praetorian Genesis is a little smaller than the original, but retains more of a tough-guy look than ever before not scaring away the fearful, but still big enough for any task!
Intended Use: Sporty / EDC
Type of production: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Dual Tone Tumbled & Satin
Handle: Purple Anodized Titanium with "Brushed Silver Flat" artwork and flamed hardware
Blade Length: 92mm.
Blade thickness: 5.5mm.
Length closed: 118mm.
Total length: 202mm.
Thickness when closed: 13mm.
Weight: 190g.
Closure system: Frame Lock
Clip: flamed titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK0294TT -
Medford Knife and Tool - Micro Praetorian T - S45VN Vulcan DP, Bronze Stained Glass Handles - MK0084 - knife
The Medford Micro Praetorian T is the smallest of Medford's knife line, but no less capable. Although in Ancient Rome they were primarily charged with the defense of the Emperor, the Praetorian Guard was entrusted with a wide range of responsibilities, from fighting fires to protecting imperial interests. The Medford Micro Praetorian T, like its modern cousins and its ancient namesake, can be used for a myriad of tasks, from self-defense to everyday cutting tasks. With its titanium handle and wide, super-strong blade, the Micro Praetorian T is an EDC option that will last a lifetime without taking up too much pocket space.
Intended Use: Sporting / EDC
Production Type: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Vulcan DP PVD
Handle: Bronze Anodized Titanium with "Stained Glass" artwork and bronzed hardware
Blade length: 75mm.
Blade thickness: 5.5mm.
Length closed: 98mm.
Total length: 172mm.
Thickness when closed: 13mm.
Weight: 134g.
Locking system: frame lock
Clip: titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK0084VD -
Medford Knife and Tool - Micro Praetorian T - S45VN Tanto PVD, Bronze Stained Glass Handles - MK0084 - knife
The Medford Micro Praetorian T is the smallest of Medford's knife line, but no less capable. Although in Ancient Rome they were primarily charged with the defense of the Emperor, the Praetorian Guard was entrusted with a wide range of responsibilities, from fighting fires to protecting imperial interests. The Medford Micro Praetorian T, like its modern cousins and its ancient namesake, can be used for a myriad of tasks, from self-defense to everyday cutting tasks. With its titanium handle and wide, super-strong blade, the Micro Praetorian T is an EDC option that will last a lifetime without taking up too much pocket space.
Intended Use: Sporting / EDC
Production Type: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Black PVD
Handle: Bronze Anodized Titanium with "Stained Glass" artwork and PVD hardware
Blade length: 75mm.
Blade thickness: 5.5mm.
Length closed: 98mm.
Total length: 172mm.
Thickness when closed: 13mm.
Weight: 134g.
Locking system: frame lock
Clip: titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK0084PT -
Medford Knife and Tool - Theseus - D2 Tumbled Blade, Violet Handles - MK040 - knife
The Theseus, named after the hero who defeated the Minotaur in ancient Greek mythology, is constructed in true Medford style. It features a tumbled D2 steel blade with stepped thumb groove and extended tang to facilitate quick one-handed use. A massive titanium handle with stainless steel spacer with lanyard hole and a unique pocket clip machined from billet complete the job.
Intended Use: Sporty
Type of production: Mid-Tech
Country of manufacture: USA
Blade: D2 steel
Blade finish: Tumbled & Satin
Handle: anodized titanium with flamed hardware
Blade length: 95mm.
Blade thickness: 5.5mm.
Length closed: 120mm.
Total length: 210mm.
Thickness when closed: 17mm.
Weight: 237g.
Closure system: Frame Lock
Clip: flamed titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK040DTQ -
Spartan Blades - Spartan-Harsey Kukri - SBSL007BK - Knife
Produced in Olean, NY, in collaboration with the skilled people at KA-BAR knives, the Spartan-Harsey Kukri knife has been designed to be a highly durable hiking knife. The kukri features a blade of over 22cm, making it an all-around tool due to its center of mass, allowing the user to slice while cutting to even penetrate thick objects.
While this blade is primarily famous for its military use, the kukri is more commonly employed as a multi-purpose tool in fields and homes across Nepal. Its uses range from construction, clearing, cutting firewood, digging, butchering animals for food, slicing meat and vegetables, skinning animals, to opening cans.
It can function as a smaller knife using the narrower part of the blade closer to the handle. The heavier and wider end of the blade, towards the tip, functions as a hatchet or a small shovel.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: 1095 carbon steel 56/58HRC
Blade Finish: Black Powder Coating
Handle: Injection-molded Thermoplastic
Blade Length: 223mm
Blade Thickness: 6.3mm
Overall Length: 352mm
Weight: 580g
Sheath: Thermoplastic, with belt attachment and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by William W. Harsey Jr. - The Professional Grade series with Silver packaging identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience to keep prices affordable for the public without having to sacrifice USA-made production.SBSL007BK -
Wander Tactical - Centuria Pilot Spear Knife - Rough - Micarta Brown - Custom Knife
Dino Picco, knifemaker and chief designer of Wander Tactical, created the Compact version of the Centuria model, fluidly combining the characteristic design of ancient Roman daggers with the iconic American combat knives of the Second World War.
Intended use: Collection
Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: RAW
Handle: Micarta
Blade length: 140mm.
Blade thickness: 5.5mm.
Total length: 275mm.
Balancing: advanced
Weight: 307g.
Sheath: in kydex, multiposition, with belt hooks and MOLLE compatible
Packaging: without packaging - supplied with Wander Tactical certificate of authenticity and guarantee
Note:WT-CE-S-MB -
Wander Tactical - Centuria - Comix Limited Edition - Custom Knife
Exclusive knife in entirely handmade "Comix" coloration, part of a batch of products made especially for the Atlanta 2023 Blade Show.
"Comix" type coloring refers to a coloring technique used in comic books and illustrations that is inspired by the style of traditional comic books. This style of coloring often features flat, bright colors with sharp edges between different shades. Some hallmarks of comix-type coloring include:
Flat backgrounds: Areas of solid color are applied without shading or complex tonal gradations. This gives a more "clean" and stylized look to the image.
Sharp edges: The borders between different shades of color are often marked by black or dark contour lines. These lines define the boundaries of the various elements in the image and accentuate the contrast between the different colors.
Bright colors: In comix-type coloring, bright, saturated colors are often used to create visual impact. These colors can be used to distinguish characters or to emphasize certain elements of the image.
Simplified shading: Although comix-type coloring may include shadows and highlights to add depth, these are often simplified compared to other coloring techniques. Shadows may be represented by areas of darker color or simple lines or brush strokes.
Graphic effects: Some elements of graphic effects, such as dots or speed lines, can be used to accentuate action or movement in illustrations.
Intended Use: Collection
Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: "Comix" coloring, entirely made and painted by hand
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: advanced
Weight: 393g.
Sheath: made of kydex, multi-position, with belt hooks and MOLLE compatible
Packaging: unpacked - comes with certificate of originality and Wander Tactical warranty
Notes: This knife is part of an exclusive batch of knives made entirely by hand and customized one by one designed for the Atlanta 2023 Blade Show.WT-CE-CMX -
Wander Tactical - Centuria Drop - Marble & Micarta Green - fixed blade knife, single edge, made in Italy
Dino Picco, cutler and chief designer of Wander Tactical, created the Compact version of the Centuria model, fluidly combining the characteristic design of ancient Roman daggers with iconic American combat knives from World War II.
Intended Use: Collection
Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Marble
Handle: Micarta
Blade length: 150mm.
Blade thickness: 5.5mm.
Total length: 280mm.
Balance: advanced
Weight: 313g.
Sheath: made of kydex, multi-position, with belt hooks and MOLLE compatible
Packaging: unpacked - supplied with certificate of originality and Wander Tactical warranty
Notes: -WT-CE-DR-MAMG -
Wander Tactical - Centuria Pilot clip knife - Raw - Micarta Brown - Custom knife
Dino Picco, knifemaker and chief designer of Wander Tactical, created the Compact version of the Centuria model, fluidly combining the characteristic design of ancient Roman daggers with the iconic American combat knives of the Second World War.
Intended use: Collection
Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: RAW
Handle: Micarta
Blade length: 140mm.
Blade thickness: 5.5mm.
Total length: 275mm.
Balancing: advanced
Weight: 307g.
Sheath: in kydex, multiposition, with belt hooks and MOLLE compatible
Packaging: without packaging - supplied with Wander Tactical certificate of authenticity and guarantee
Note:WT-CE-PI-MB -
Wander Tactical - Centuria Drop knife - Black Blood - Micarta Brown - Custom knife
Dino Picco, knifemaker and chief designer of Wander Tactical, created the Compact version of the Centuria model, fluidly combining the characteristic design of ancient Roman daggers with the iconic American combat knives of the Second World War.
Intended use: Collection
Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Black Blood
Handle: Micarta
Blade length: 150mm.
Blade thickness: 5.5mm.
Total length: 280mm.
Balancing: advanced
Weight: 313g.
Sheath: in kydex, multiposition, with belt hooks and MOLLE compatible
Packaging: without packaging - supplied with Wander Tactical certificate of authenticity and guarantee
Note:WT-CE-DR-BB-B -
Strider Knives - 2010 Tiger Stripe BG Gunner Grip Black G10 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued; Company no longer in operation as of 2017.
* Sharpening: Factory.
* Marks on blade: Normal marks, found on all Strider models with Tiger Stripe finish.
* Marks on handle: None
* Box: Originally sold unboxed
* Scabbard: Original, in Khaki-colored Cordura, by Eagle USA.
* Manuals, Certificates and Warranties:Originally sold without certificates or warranties.
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Collection
Type of manufacture:Midtech
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade Finish: Tiger Stripe
Handle: Black G-10 with GG (Gunner Grip) pattern
Blade length: 160mm.
Blade thickness: 6.3mm.
Total length: 298mm.
Weight: 353g.
Sheath: Khaki, cordura, by Eagle USA
Packaging: -
Notes: 2010 specimen in very good condition - Shows small scuff marks on the Tiger Stripe finish, which is common with any Strider model made with this matte blade finish - Strider knives have always been offered by the company without any box, packaging, manual or certificate - This historic company ceased operations in 2017, after a 25-year career - Mick Strider, the company's previous founding partner, is still in business and dedicated solely to making custom knives.AP-ST-BG-GG -
Bark River - Bravo 1 Field Knife - Mil-Spec - Camo G-10 - COLLEZIONE PRIVATA - coltello
COLTELLO RITIRATO DA COLLEZIONE PRIVATA
* Tipologia: Precedentemente Acquistato
* Condizioni: Globalmente in buone condizioni
* Reperibile in commercio: non più in produzione
* Affilatura: Di fabbrica
* Segni su lama: Leggeri
* Segni su impugnatura: No
* Scatola: Non presente
* Fodero: In Cuoio
* Manuali, Certificati e Garanzie: NO
* Controllato e Certificato dal nostro laboratorio internoDestinazione d'uso: Tattico/Collezione
Tipo di produzione: Semi-Industriale
Paese di produzione: USA
Lama: in acciaio inox CPM-S35VN
Trattamento lama: satinatura
Manicatura: G-10 Camo
Lunghezza lama: 110mm.
Spessore lama: 5.5mm.
Lunghezza totale: 244mm.
Bilanciatura: arretrata di circa 2 cm dal bordo della guancetta
Peso: 240g. (350g. fodero compreso)
Fodero: In cuoio
Confezione: privo di scatola e certificati
Note: -AP-BRAVO1 -
Charlton Ltd - Custom Damascus Bob Lum style Tanto - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased - knife dating back to the late 80s
* Condition: excellent condition
* Commercially available: Discontinued since 2018
* Sharpening: Factory
* Marks on blade: No
* Signs on the handle: very small marks
* Box: packaging
* Sheath: in wood
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryIntended use: Collection / Vintage
Type of production: handcrafted
Country of production: USA
Blade: hand forged Damascus steel
Blade treatment: -
Handle: in wood
Blade length: 110mm.
Blade thickness: 5.5mm.
Total length: 230mm.
Weight: 245g.
Scabbard: wooden scabbard
Notes: limited edition 1 of 200AP-CHLTD€0.00Only -50 leftOut of stock -
Puma - Back Packer 465 knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Out of production, model dating back to the 90s
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: without box
* Sheath: -
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory
Intended use: Collection / VintageType of production: artisanal
Country of production: Germany
Blade: stainless steel
Blade finish: satin finish
Handle: ABS with metal parts
Blade length: 80mm.
Blade thickness: 2.5mm.
Total length: 185mm.
Balancing: backward
Weight: 130g.
Sheath: -
Packaging: -
Notes: Vintage 90s knifePU-BP465 -
Mission - MPK10-A2 Plain Edge - Navy Seal Knife - USED - Knife
Knife withdrawn from private collection - Used, but overall in good condition - An iconic, iconic knife from the first decade of the 2000s, tested and selected by the U.S. Navy Seals - The knife already when new presented itself with an average low level of finish and with a rough micropeened blade already very delicate and marked, this knife, used in the field by an Italian soldier in theaters of war, shows signs of cosmetic wear on both blade and sheath that do not affect its functionality in the slightest - Factory sharpening still in excellent condition - Original amphibious scabbard, in very good condition - No box - Checked and certified by our in-house laboratory.
Intended Use: Tactical / MultiroleType of Manufacture: industrial
Blade: A2 steel hardened to 57/58HRC
Country of Production: USA
Handle: made of Hytrel
Blade length: 140mm.
Blade thickness: 6.3mm.
Total length: 267mm.
Weight: 360g.
Sheath: amphibious, made of Hytrel
Packaging: without original packaging
Notes: used knife, withdrawn from private collection, overall in good conditionMI-MPK10-A2 -
Randall Knives - Model 14 Attack - '80s Vintage - PRIVATE COLLECTION - knife
Knife withdrawn from private collection, dating back to the late 1980s, overall in very good condition - Never used, still has factory thread - Checked, certified by our in-house lab.
Intended use: Tactical / CollectionType of production: handcrafted
Country of manufacture: USA
Blade: O1 carbon steel
Blade finish: satin finish
Handle: micarta and brass
Blade length: 190mm.
Blade thickness: 5.5mm.
Total length: 307mm.
Balance: on the guard branch
Weight: 414g.
Sheath: Leather
Notes: knife withdrawn from private collection dating back to the late 1980s, overall in very good conditionRA-14A-CP -
Wander Tactical - Centuria knife - Serial V - Prototype Limited Edition - Custom knife
Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely hand-made limited series of prototypes, in just 10 specimens all different from each other, of the new Centuria fixed blade model that smoothly blends the typical design together. of ancient Roman daggers with iconic American World War II combat knives.
Intended use: Collection
Type of production: Artisan
Country of production: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balancing: advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible
Packaging: unpacked - supplied with certificate of originality and Wander Tactical guarantee
Notes: This knife is part of an exclusive batch of handcrafted prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, processes, bevels and grindings that make the 10 pieces all completely different from each other.WT-CE-PR-V -
ExtremaRatio - Lamborghini Reventón knife - Limited Edition - PRIVATE COLLECTION - knife
Reventon knife, no longer in production for years and limited to 2000 pieces, withdrawn from a private collection globally in excellent condition - Complete with everything, plastic box and certificates. Checked and certified by our internal laboratory.
Extrema Ratio was chosen by Automobili Lamborghini to produce the Reventón Folder, an emergency knife, belt cutter and glass breaker, designed by the Lamborghini Style Center, which becomes the official equipment of each of the 20 Reventón produced, the most exclusive supercar of the House of Bull.
The "Reventón Folder" is an accessory of the highest functional and aesthetic level, clearly in line with the philosophy of the car built with concepts and technologies directly borrowed from the most advanced aviation industry.
The knife is produced in a limited edition of 2,000 pieces, the first twenty equip the Reventón, the other 1980 pieces will be available for collectors.
Intended use: Collection
Type of production: Industrial
Production Lama: Italy
Blade: N690Co 58HRC stainless steel
Blade treatment: Testudo
Handle: Anticorodal
Blade length: 120mm.
Blade thickness: 6.3mm.
Closed length: 155mm.
Total length: 260mm.
Thick when closed: 21mm.
Balancing: -
Weight: 235g.
Closure: Back Lock with safety catch
Clip: -
Sheath: -
Packaging: plastic box with Lamborghini and Reventon logos
Notes: Specimen number 297 out of 2000, unique piece at our disposalAP-REV-ER -
Puma - Defender LM - 154CM Limited Edition - 14 6481 - PRIVATE COLLECTION - knife
Iconic knife produced by Puma and dating back to the late 1980s, characterized by a then very modern line and a very advanced steel for the time (154CM). Knife withdrawn from private collection - Overall in very good condition - Never used, never sharpened, still with factory sharpening - A few small marks on the right side handle, in concomitance with the sheath that goes to hook the knife through a pin that tends to irreparably rub the handle itself - Supplied with original wooden case and leather sheath - Checked and certified by our internal laboratory Coltelleria Collini
Intended use: Collection / Vintage / Tactical
Type of production: handcrafted
Country of manufacture: Germany
Blade: stainless steel 154CM
Blade finish: satin-finished
Handle: Integral, stainless steel and Micarta
Blade length: 160mm.
Blade thickness: 5.5mm.
Total length: 290mm.
Balance: backward
Weight: 285g.
Sheath: leather
Packaging: wooden case
Notes: 1980s Vintage knife - Limited edition of only 500 pieces, numbered on the blade, specimen 170 of 550 - Knife withdrawn from private collection globally in excellent conditionPU-DEFLM-CP -
Wander Tactical - Prototype - PRIVATE COLLECTION - SanMai V-Toku2 & Desert Paracord - custom knife
Absolutely like new - Comes from a private collection - Unique item made in 2020, prototype, does not correspond to any standard model of Wander Tactical production - Made entirely by hand.
Use: Collection / Utility / Hunting
Production type: Handcrafted
Country of Production: Italy
Blade: integral, japanese rolled steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
Blade finish: satin finish
Handle: Paracord
Blade length: 90mm.
Blade thickness: 6.65mm.
Total length: 200mm.
Balance: backward
Weight: 180g.
Sheath: in kydex
Package: Certificate of authenticity
Notes: Unique piece of 2020 - Prototype: it doesn't correspond to any standard model of Wander Tactical production - Entirely hand made - Absolutely like new, coming from a private collection,Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Coltelleria Collini, we decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically we have used the carbonaceous V-Toku2 at 62/63HRC for the central plate and the stainless SUS410 for the two external plates, in order to guarantee a very high cutting capacity, penetration and edge holding together with an easy resharpening and maintenance. At the same time the blade has a remarkable resistance to corrosion and an important increase of resilience given by the type of extreme steel and the laminated structure.
As in the ancient swords of the Japanese Samurai.
The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: It is made of different types of metals alloyed together to create a composite that contains and intensifies the strengths of the metals taken individually:
- Longer cutting edge life
thanks to the use of high quality steels with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performance decidedly superior to those achieved with the use of traditional steels.- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.- Improved aesthetic performance
Knives made of multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For further information: collinisteel
WT-PRO-VT -
ExtremaRatio - Frame Rock Titan Knife - Blue Satin - PRIVATE COLLECTION - folding knife
Knife withdrawn from a private collection - In like new condition - Never regrind - Checked and certified by our in-house Coltelleria Collini laboratory.
The Extrema Ratio Frame Rock is a new knife, based on the Ti-Rock project, a successful frame-lock knife made by Extrema Ratio in 2016 exclusively for Coltelleria Collini.
The Extreme Ratio Frame Rock is characterized by a titanium handle that offers great resistance while being very light. The integrity of the frame-lock system is guaranteed against wear by an easily replaceable hardened steel insert.
Unlike its drop-point predecessor, the Rock frame has a 75mm long, 6.0mm thick spearpoint blade fitted with a fuller for further lightening. The blade is made of Bohler N690 steel, heat treated to a hardness of 58 HRC. The same is available with a black finish with DLC treatment or satin.
To make opening even more fluid and without uncertainty, the blade rotates on ball bearings. This mechanism allows the user to adjust the force necessary to obtain the release of the blade from the closed position.
The shape of the reversible clip allows a hidden port in the pocket, making the knife not visible from the outside. The large and solid handle and the well-proportioned blade allow this knife to tackle heavy tasks. The Frame Rock weighs less than 200g, making it somewhat light for such a sturdy knife. Comes inside an ABS box.
Intended use: collection / CQD
Type of production: industrial,
Blade: N690Co stainless steel
Blade treatment: Satin finish
Country of production: Italy
Handle: Titanium, machined from solid, with integral Frame Lock closure system with removable flap and safety made of stainless steel
Blade length: 75mm.
Blade thickness: 6.3mm.
Total length: 181mm.
Weight: 193g.
Clip: stainless steel, reversible, deep pocket type and with tip up port
Notes: Conical Skull Crasher inserted in the tang
Box: in ABS with Extrema Ratio logosAP-ER-FR-BS -
ExtremaRatio & Knives.it - Tengu Tactical - Icepick Karambit - knife
THE BRAND
Exclusive collaboration between Coltelleria Collini and Extrema Ratio marketed under the brand KNIVES.IT.TECHNICAL DATA SHEET
Intended Use: Collection / Tactical / Neck knife
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade finish: Black PVD cat. MIL-C-13924
Handle: Stainless steel N690Co 58/60HRC
Blade length: 40mm.
Blade thickness: 5.5mm.
Total lenght: 166mm.
Weight: 86g.
Sheath: optional (available separately) in Kydex, handcrafted by the Italian Knife Maker Simone Tonolli.
Package: cardboard box with Extrema Ratio logos
Notes: knife created and manufactured by Extrema Ratio - each knife is numbered - Design by LoTacticalHISTORY
The Tengu takes its name from a mythical creature of Japanese folklore that is represented with both human and raven features, they had the reputation of being great warriors and legends say that some founders of martial arts were trained by them.- It is designed to be used in many different grips, but is especially effective in the reverse grip.
- Designed to be carried in a variety of ways, whether as a neck knife, under shirt, clipped in a pocket or around the waist using optional systems such as Ulti-Clip or Tek-Lok or various M.O.L.L.E. type attachments.
- With its thickness of 5.5 mm. is extremely robust and thanks to the shape of the handle is comfortable even by those with large hands or those who want to use it with tactical gloves.
- The blade is compact, robust and very functional for both precision cutting and hard materials thanks to the serrated part on the back. The tanto-shaped tip is very robust and optimal for engraving work.ER-TENGU -
SOG - Super SOG Bowie Black TiNi - SB1T-L - Knife
For SOG's 20th anniversary in 2006, a new adaptation of the original SOG Bowie, one of the company's signature knives, was released. This oversized blade knife will amaze you with its precise and aesthetically accurate construction to that of the 1980s. Unlike the original, all parts are protected by a black TiNi coating to give the knife a more aggressive look and better performance.
Intended use: collection / tactical / military / vintageType of production: industrial
Blade: AUS-8 stainless steel
Blade finish: titanium nitriding
Handle: Leather rings
Blade length: 190mm.
Blade thickness: 6.5mm.
Total length: 326mm.
Balance: backward
Weight: 485g.
Scabbard: leather
Notes: -SB1T-L -
Wander Tactical - Centuria knife - Serial VIII - Prototype Limited Edition - Custom knife
Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely hand-made limited series of prototypes, in just 10 specimens, all different from each other, of the new Centuria fixed blade model that smoothly blends the typical design together. of ancient Roman daggers with iconic American World War II combat knives.
Intended use: CollectionType of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balancing: advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible
Packaging: unpacked - supplied with certificate of originality and Wander Tactical guarantee
Notes: This knife is part of an exclusive lot of handcrafted prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, processes, bevels and grindings that make the 10 pieces all completely different from each other.WT-CE-PR-VIII -
Wander Tactical - Centuria - Serial VII - Prototype Limited Edition - Custom Knife
Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely handmade limited edition of prototypes, in only 10 pieces all different from each other, of the new fixed blade model Centuria that smoothly blends together the typical design of the ancient Roman daggers with the iconic American combat knives of World War II.
Intended Use: CollectionType of production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: Advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible.
Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
Notes: This knife is part of an exclusive batch of handmade prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, machining, bevelling and grinding that make the 10 examples all completely different from each other.WT-CE-PR-VII -
Wander Tactical - Centuria - Serial IX - Prototype Limited Edition - Custom Knife
Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely handmade limited edition of only 10 different prototypes of the new Centuria fixed blade model that smoothly blends together the typical design of ancient Roman daggers with the iconic American combat knives of World War II.
Intended Use: CollectionType of production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: Advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible.
Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
Notes: This knife is part of an exclusive batch of handmade prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, machining, bevelling and grinding that make the 10 examples all completely different from each other.WT-CE-PR-IX -
ExtremaRatio - Col Moschin Satin knife in San Mai V-TOKU2 - Limited Edition - knife
Japanese steel blends with Italian excellence
For this 2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.
Col Moschin model: for this First Production Run a run of 11 pieces was produced, numbered from 1 to 11.
Special purpose cutting knife, specially developed for the 9th Col Moschin Parachute Assault Regiment, elite unit of the Folgore brigade.
Use: tactical, sports, hiking, collection
Blade: integral, in laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Handle: forprene
Blade length: 160mm.
Blade thickness: 6.5mm.
Total length: 290mm.
Balance: set back to 0.5cm. from the guard branch
Weight: 265g.
Sheath: modular tactical, from thigh or belt, in Nylon
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate - being the cutting edge in carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a light surface of oil.
As in the ancient Japanese Samurai swords.Rolled steel - imported into Italy by Collini Steel directly from Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
Invia commenti
Cronologia
Salvate
CommunityER-COL-VT -
ExtremaRatio - Col Moschin Compact Satin knife in San Mai V-TOKU2 - Limited Edition - knife
Japanese steel blends with Italian excellence
For this 2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.
Col Moschin Compact model: for this First Production Run a run of 10 pieces numbered from 1 to 10 was created.
The lethality of the COL MOSCHIN knife in compact version. Supplied with rigid belt sheath and BELT-CLIP. The rigid sleeve can be positioned horizontally, vertically or in a 45 ° inclined position
Use: tactical, sports, hiking, collection
Blade: integral, in laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Handle: forprene
Blade length: 110mm.
Blade thickness: 6.5mm.
Total length: 212mm.
Balance: set back to 0.5cm. from the guard branch
Weight: 209g.
Sheath: ABS with multi-position Tek-Lok attachment
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate - being the cutting edge in carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a thin surface of oil.
As in the ancient Japanese Samurai swords.Rolled steel - imported into Italy by Collini Steel directly from Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
ER-COLC-VT -
Chris Reeve - Green Beret 5.5 "knife - Dark Earth by W. Harsey - knife
Intended use: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: CPM-S35VN stainless steel at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade length: 140mm.
Blade thickness: 5.58mm.
Total length: 276mm.
Balancing: on the lower guard branch
Weight: 335g.
Sheath: Nylon thigh, M.O.L.L.E.compatible
Notes: New 2018 version - Guarantee and authenticity certificates - Design by William W. HarseyGBS-1002 -
ExtremaRatio - Fulcrum C Satin knife in San Mai V-TOKU2 - Limited Edition - knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
FULCRUM C model: for this First Production Run, a circulation of 10 pieces numbered from 1 to 10 was produced.
FULCRUM C is the compact version of FULCRUM, it maintains all the characteristics of solidity and robustness and, thanks to the reduced dimensions of the blade (only 110 mm) and the handle, it is easily portable and concealable. The rigid sheath can be positioned horizontally, vertically or in a 45 ° inclined position. The only safety of the sheath is automatic with extraction and re-insertion by pressure, this detail makes it an intuitive and extremely fast tool, particularly suitable for emergency use and for personal defense.
Use: backup knife
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade thickness: 6.3 mm.
Blade length: 90 mm.
Total length: 210 mm.
Balancing: set back to 0.5cm. from the guard branch
Weight: 210g.
Sheath: ABS with Tek-Lok multiposition attachment
Notes: Numbered edition - cardboard box with Extremaratio logos and certificateAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (V-Toku2, VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, reaches hardness and cutting performance significantly higher than that achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.ERCC-P-F-VT2 -
ExtremaRatio - Shrapnel OG Satin - San Mai V-TOKU2 Limited Edition - knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
SHRAPNEL OG model: for this First Production Run, a circulation of 10 pieces numbered from 1 to 10 was produced.
SHRAPNEL OG is a truly multi-purpose "back-up", with strong combat attitudes. The leaf blade is characterized by a wide flat winding, with a narrow sharpening angle which makes it particularly sharp. The rigid sheath can be positioned horizontally, vertically or inclined at 45 °. The SHRAPNEL OG is produced without the top guard.
Use: tactical, sports, hiking, collection
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Handle: forprene
Blade length: 90mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: set back to 0.5cm. from the guard branch
Weight: 190g.
Sheath: ABS with Tek-Lok multiposition attachment
Notes: Numbered edition - cardboard box with Extremaratio logos and certificateAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (V-Toku2, VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, reaches hardness and cutting performance significantly higher than that achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.ERCC-P-S-VT2 -
Medford Knife and Tools - USMC Fighter tactical knife MK103 - knife
modern version of the classic USMC produced by Medford
Intended use: Tactical / Collection
Type of production: Custom
Lama production: U.s.a
Blade: S35VN steel
Blade treatment: S35VN
Handle: G10 3-D surfaced multi-colored
Blade length: 165mm.
Blade thickness: 6.5mm.
Total length: 290mm.
Balancing: set back 1.5 cm on the guard branch
Weight: 488g.
Sheath: custom in leather
Packaging: nylon case, with zip closure and Medford logos
Notes: Designed and built by Greg MedfordMK103 -
Brian Tighe and Friends - Tighe Fighter Large Fixed Carbon Fiber - 1104-1 - knife
Destination of use: collection
Type of production: mid tech / semi-custom
Country of production: USA
Blade: 154CM stainless steel
Blade treatment: Satin
Handle: Carbon fiber
Blade length: 124mm.
Blade thickness: 6.3mm.
Total length: 254mm.
Balancing: on the guard branch
Weight: 220g.
Sheath: Kydex
Packaging: cardboard with logos Brian Tighe and Friends, Design by Brian Tighe
Notes: numbered seriesBT1104-1 -
Chris Reeve - Green Beret 7" knife by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1000 -
Chris Reeve - Green Beret 7" knife Dark Earth by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1002 -
Extremaratio - Arditi Deluxe - Single-edged dagger - Limited Collector's Edition - Knife
The particular situation created in the early years of the 1914/18 war, now mired in increasingly complex and protected trenches and fortifications, favored the formation of men who, little by little, specialized in the coup.
Our assault units, the Arditi, had their dagger. It was obtained from the pieces cut away by the long blades of the Vetterli 1870 bayonets, which in the narrow trenches, in the corridors, between the reticulars were only an obstacle. It was certainly a rustic weapon, of recovery, not too beautiful but certainly inexpensive, light, not cumbersome and in expert hands also effective.
Today, on the occasion of the centenary, we recall this important page of Italian military history with a limited celebratory series in only 100 numbered copies. This version has a satin blade and a walnut wood handle and is sold with a wooden box and leather sheath.
Intended use: Tactical / Military / Collection
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Satin
Handle: Walnut wood
Blade length: 167mm.
Blade thickness: 6.3mm.
Total length: 270mm.
Weight: 224g.
Sheath: leather thigh-strap
Packaging: wooden box
Notes: Limited edition in 100 numbered copies - Edition to celebrate the hundred years of the Italian ArditiER-AR-D -
Extremaratio - Arditi Black - Single-edged dagger - knife
The particular situation created in the early years of the 1914/18 war, now mired in increasingly complex and protected trenches and fortifications, favored the formation of men who, little by little, specialized in the coup.
Our assault units, the Arditi, had their dagger. It was obtained from the pieces cut away by the long blades of the Vetterli 1870 bayonets, which in the narrow trenches, in the corridors, between the reticulars were only an obstacle. It was certainly a rustic weapon, of recovery, not too beautiful but certainly inexpensive, light, not cumbersome and in expert hands also effective.
Today, on the occasion of the centenary, we remember this important page of Italian military history with a limited series of celebrations of 1918 copies. This version has a burnished blade, a polymer handle and a black cordura sheath.
Intended use: Tactical / Military / Collection
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Burnishing MIL-C-13924
Handle: Polymers
Blade length: 167mm.
Blade thickness: 6.3mm.
Total length: 270mm.
Weight: 224g.
Sheath: Nylon leg strap
Packaging: cardboard box with Extrema Ratio logos
Notes: Edition limited edition in 1918 copies - Edition to celebrate the hundred years of the Arditi of ItalyER-AR-BK -
Kiku Matsuda Knives - Southern Cross KM-760 Fixed Knife - craft knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.
Intended use: Collection / Sports
Type of production: Artisan
Lama production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade treatment: -
Handle: Black Canvas Micarta
Blade length: 80mm.
Blade thickness: 5.3mm.
Length closed: -
Total length: 195mm.
Thickness when closed: -
Balancing: -
Weight: 186g.
Closure: -
Clip: -
Sheath: in Kydex with Tek-Lok attack
Package: -
Notes: Kiku Matsuda won in 2007 the prestigious "Knife Of The Year Awards" Blade Show with a project realized in collaboration with SOGKM-760 -
Chris Reeve - Pacific Dark Eart by W. Harsey - 2017 Version - knife
Purpose of use: Collection / Utility
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyPAC-1005 -
Chris Reeve - Pacific Plain by W. Harsey - 2017 Version - knife
Purpose of use: Collection / Utility
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyPAC-1000 -
Chris Reeve - Pacific by W. Harsey - 2017 Version - knife
Purpose of use: Collection / Utility
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyPAC-1001 -
Chris Reeve - Green Beret 5.5" Dark Earth by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 140mm.
Blade thickness: 5.58mm.
Total length: 276mm.
Balance: on the lower guard branch
Weight: 335g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB5-1003 -
Chris Reeve - Green Beret 7" Dark Earth by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1003 -
Chris Reeve - Green Beret 7" by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1001 -
Kiku Matsuda Knives - Back Up Neo 300 Fixed Blade Knife - craft knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.
Purpose of use: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade Treatment: -
Manicure: Black Canvas Micarta
Blade Length: 140mm.
Blade thickness: 6.5mm.
Closed length: -
Total Length: 270mm.
Closure thickness: -
Balance: -
Weight: 384g.
Closure: -
Clip: -
Sheath: in Kydex with Tek-Lok attachment
Packing: -
Notes: Kiku Matsuda won the prestigious prize at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOGKM-300 -
Kiku Matsuda Knives - Back Up Zero 490 Fixed Blade Knife - artisan knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.
Purpose of use: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade Treatment: -
Manicure: Green Canvas Micarta
Blade Length: 98mm.
Blade thickness: 5.5mm.
Closed length: -
Total length: 200mm.
Closure thickness: -
Balance: -
Weight: 250g.
Closure: -
Clip: -
Sheath: in Kydex with Tek-Lok attachment
Packing: -
Notes: Kiku Matsuda won the prestigious award at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOG KnivesKM-490 -
ExtremaRatio - 185 ° RAO in Sanmai Japanese steel - knife
Folding knife made upon specific requests of the department of the Italian Army 185 ° RAO ( Target Acquisition Regiment ) and is now included the eponymous department . The knife supplied differs from the calendar for the total lack of writings or logos on the blade.
Limited Edition RAO model characterized by a satin blade in Japanese rolled steel produced by Takefu Steel. to the central plate and the 420J2 (56 HRC) In the specific CoS it is used to 61,5HRC (Cobalt Special deemed superior mechanically by 25% compared to the already appreciated VG10) for the two side plates, in order to have a very high capacity cutting but at the same time a remarkable resilience and resistance to oxidation.
folding knife made upon specific requests of the Italian Department of the Army 185th RAO (Regiment Acquisition Objectives) and currently supplied to the homonymous department. The knife supplied differs from that only civil to the total lack of written or logos on the blade.
Intended Use: Military / TacticalType of production: Industrial
Production Lama: Italy
Blade: (San Mai) Japanese-rolled stainless steel with sharp CoS to 61,5HRC in cryogenic tempering
Lama Treatment: Testudo
Handle material: anticorodal 4.5mm
Blade length: 118mm.
Blade Thickness: 6.3mm.
Length closed: 142
Overall length: 261mm.
Balancing: -
Weight: 335g.
Closure: front modified lock - threaded safety pin
Clip: -
Sheath: tactical nylon by Vega with M.O.L.L.E. attacks suitable for both the closed knife that open - color BLACK
Notes: sharpening the included DiamondRAO-SANMAI -
ExtremaRatio - Ti-Rock Satin SanMai CoS - Titanium Black - Limited Edition - folding knife
A Coltelleria Collini Exclusive - Limited edition, available in only 33 serialized pieces
Intended Use: collection / EDC / CQDType of production: Industrial, Limited
Blade: Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic quenching; with fuller double concave in the strong blade
Blade treatment: Satin finish
Production Country: Italy
Handle: Titanium, Billet, with full Frame Lock locking system with sash and secure removable made of stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 186g.
Clips: stainless steel, reversible type deep pocket and port tip up
Notes: Skull Crasher tapered shank engaged in - Edition limited and numbered edition in only 33 serialized pieces on the blade and box
Box: cardboard, numbered, with ExtremaRatio logos and Coltelleria ColliniTIROCK-C-BK -
ExtremaRatio - Ti-Rock Satin SanMai CoS - Titanium Blue - Limited Edition - folding knife
A Coltelleria Collini Exclusive - Limited edition, available in only 33 serialized pieces
Intended Use: collection / EDC / CQDType of production: Industrial, Limited
Blade: Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic quenching; with fuller double concave in the strong blade
Blade treatment: Satin finish
Production Country: Italy
Handle: Titanium, Billet, with full Frame Lock locking system with sash and secure removable made of stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 186g.
Clips: stainless steel, reversible type deep pocket and port tip up
Notes: Skull Crasher tapered shank engaged in - Edition limited and numbered edition in only 33 serialized pieces on the blade and box
Box: cardboard, numbered, with ExtremaRatio logos and Coltelleria ColliniTIROCK-C-BL -
ExtremaRatio - Ti-Rock Satin sanmai CoS - Titanium Grey - Limited Edition - folding knife
A Coltelleria Collini Exclusive - Limited edition, available in only 33 serialized pieces
Intended Use: collection / EDC / CQDType of production: Industrial, Limited
Blade: Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic quenching; with fuller double concave in the strong blade
Blade treatment: Satin finish
Production Country: Italy
Handle: Titanium, Billet, with full Frame Lock locking system with sash and secure removable made of stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 186g.
Clips: stainless steel, reversible type deep pocket and port tip up
Notes: Skull Crasher tapered shank engaged in - Edition limited and numbered edition in only 33 serialized pieces on the blade and box
Box: cardboard, numbered, with ExtremaRatio logos and Coltelleria ColliniTIROCK-C-GR -
ExtremaRatio - Ti-Rock Tactical Version - Limited Edition - knife
Collectors Edition with:
* Box of ABS branded laser
* Tactical Kydex scabbard and leather, handcrafted
* Attack Tek-Lok
* Lanyard black paracord with custom anodized titanium wire stop with slogans and Extrema Ratio Knives ColliniOnly two specimens at our disposal: Number 4 of 100 and number 9 of 100
This is a Collini Cutlery Exclusive - Only available in 100 serialized pieces
Intended Use: collection / EDC / CQD
Type of production: industrial, Limited
Blade: N690 stainless steel in 58HRC with hollow ground fuller
Blade Treatment: Black Testudo
Blade Production: Italy
Handle: Titanium machined from solid.
Closing system: Frame Lock with swing and safe removable stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 190g.
Clips: stainless steel, reversible, deep pocket, tip up
Notes: Conical Skull Crasher engaged in the shank - Limited and serialized edition in only 100 pieces
Box: Cardboard, serialized, with Extrema Ratio and Coltelleria Collini logosTi-Rock-Collector -
ExtremaRatio - Shrapnel OG Satin in San Mai CoS - knife
For this new exclusive collaboration with Extrema Ratio we decided to propose a best seller in the world of cutlery, the Shrapnel model. It's a satin blade version but the most important thing is that has been used, for the first time in Italy, the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used the CoS (Cobalt Special, considered mechanically superior by 25% compared to the already appreciated VG10) for the central plate and the 420J2 (55 HRC) for the two side plates, in order to have a high cutting capacity, but at the the same time a remarkable resilience and resistance to oxidation.
A First Production Run of 30 pieces has been made.
SHRAPNEL OG is a truly versatile “back up” knife with marked combat qualities. Its leaf-shaped blade is flat ground at a characteristically low angle to a wide, extraordinarily sharp edge. The included hard sheath can be worn vertically, horizontally or obliquely (at a 45° angle). Tthe SHRAPNEL OG hilt design does not include a guard.
Use: tactical , sports , hiking , collection
Blade: Full , Japanese- rolled stainless steel ( San Mai) with sharp CoS to 61,7HRC in cryogenic tempering
Handle: Forprene
Blade length: 90mm.
Blade Thickness: 6.5 mm.
Overall length: 210mm.
Balancing: back to 0.5cm . by guard branch
Weight: 214g.
Sheath: ABS with Tek - Lok multi attack
Notes: cardboard box with Extremaratio logos and certificate
Clad Metal
It is a composite metal partly or entirely diffusion bonded together of different kinds of metals.
Metal composition shows higher performance which respective materials alone do not possess and the performance complements opposite characteristics of each material, that is "compound characteristics"Clad Effect on Cutleries
Toughness
Like Japanese swords, clad metal is hard to break or bend, thanks to the toughness as the hard steel part is clad with soft steels.
Easy to work on
Cladded structure is easy to apply on such works as forging, grinding, sharpening or polishing to make a sharp blade.
Improved corrosion resistance
Proper material combination generates electrical potential difference and it enhances the corrosion resistance on blade edge.
Better and long lasting sharpness
Steel after forging pressure makes the microscopic structure denser and improves the sharpness and ensures long lasting performance.
Resource saving
As high class steel is used only for necessary part, it is perfectly cost effective..
Easy distortion correction
As the steel is bonded with soft steel materials, its blade is hard to break and the distortion correction is easy.
Easy drilling and welding after heat treatment
Though the steel gets harder after heat treatment, the soft steel never loses its softness, enabling the material to be drilled or welded.
Design improvement
Laminated patterns or Damascus patterns appear from basis materials which are bonded with different kinds of metals.ERCC-SH -
Extrema Ratio - Col Moschin Collector Edition - Black - knife
Commissioned and officially adopted in 2002 by the famous 9th Regiment. Raiders "Col Moschin", this model expresses the quintessence of pure combat knife.
Inspired by daggers with asymmetric blade and straight handle but oriented Arditi, from which the Regiment traces its vestiges, it was reworked in a modern way.
The center of gravity is strong backlog, particularly the tip piercing. And 'light, handy and intuitive. Each new intruder receives one, and each new intruder is trained to use it.
All knives of this series have straight handles KRATON from ergonomic design whose shape and size favors besides a solid grip the rapid change of straight handle (Sabre Grip) to upside (Reverse Grip). An Allen screw stainless steel allows the campaign from disassembly for maintenance and lubrication of the through shank increasing the operational life of the knife.
The sheath and 'suitable all'aviolancio and underwater operations and amphibious and is' applicable to the belt or the accoutrements.
Intended Use: Collection / Tactical / MilitaryProduction Country: Italy
Blade: N690Co 58HRC stainless steel
Surface treatment: Black PVD
Handle: Removable Kraton
Blade length: 160mm.
Blade Thickness: 6.3mm.
Overall length: 290mm.
Balancing: backward, 1 cm. the branch of the lower guard
Weight: 265g.
Sheath: tactical modular, from thigh or belt, Nylon
Notes: Limited Edition with exhibitor in Plexyglass12507 -
ExtremaRatio - Ti-Rock Tactical Version - Limited Edition - knife
** SOLD OUT - OUT OF STOCK AND OUT OF PRODUCTION **
This is a Collini Cutlery Exclusive - Only available in 100 serialized pieces
Intended Use: collection / EDC / CQD
Type of production: industrial, Limited
Blade: N690 stainless steel in 58HRC with hollow ground fuller
Blade Treatment: Black Testudo
Blade Production: Italy
Handle: Titanium machined from solid.
Closing system: Frame Lock with swing and safe removable stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 190g.
Clips: stainless steel, reversible, deep pocket, tip up
Notes: Conical Skull Crasher engaged in the shank - Limited and serialized edition in only 100 pieces
Box: Cardboard, serialized, with Extrema Ratio and Coltelleria Collini logosTi-Rock -
Kiku Matsuda Knives - Aoba Fixed Blade Knife - craft knife
Kiku Matsuda è uno dei più famosi artisti e studiosi dell'affilatura di tutto il Giappone; probabilmente nella vostra collezione sarà già presente un coltello frutto della sua passione: collabora infatti da diversi anni con SOG, William Henry, Pro-Tech e Randall Kings sviluppando per loro bisellature, affilature e politure delle lame.
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: in acciaio al carbonio OU-31 temprato a 63/64 HRC
Trattamento Lama: -
Manicatura: Black Canvas Micarta
Lunghezza lama: 105mm.
Spessore lama: 5,5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 260g.
Chiusura: -
Clip: -
Fodero: in Kydex con attacco Tek-Lok
Confezione: -
Note: Kiku Matsuda ha vinto nel 2007 il prestigioso premio al Blade Show "Knife Of The Year Awards" con un progetto realizzato in collaborazione con SOG KnivesKnife Of The Year Awards Knife Of The Year AwardsAB31 -
Kiku Matsuda Knives - Back Up Small Fixed Blade Knife - craft knife
Kiku Matsuda è uno dei più famosi artisti e studiosi dell'affilatura di tutto il Giappone; probabilmente nella vostra collezione sarà già presente un coltello frutto della sua passione: collabora infatti da diversi anni con SOG, William Henry, Pro-Tech e Randall Kings sviluppando per loro bisellature, affilature e politure delle lame.
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: in acciaio al carbonio OU-31 temprato a 63/64 HRC
Trattamento Lama: -
Manicatura: Green Canvas Micarta
Lunghezza lama: 98mm.
Spessore lama: 5,5mm.
Lunghezza chiuso: -
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 250g.
Chiusura: -
Clip: -
Fodero: in Kydex con attacco Tek-Lok
Confezione: -
Note: Kiku Matsuda ha vinto nel 2007 il prestigioso premio al Blade Show "Knife Of The Year Awards" con un progetto realizzato in collaborazione con SOG KnivesKnife Of The Year Awards Knife Of The Year AwardsBUP-MN -
Medford Knife and Tools - NAV-T Tactical Coyote - knife
Medford Knife and Tools - NAV-T Tactical Coyote - knife
Intended use: Tactical / Collection
Type of production: Custom
Production Lama: Use
Blade: Stainless D2
Treatment Lama: -
Handle material: paracord woodland
Blade length: 95mm.
Blade thickness: 6.5mm.
Overall length: 230mm.
Balancing: on the branch of guard
Weight: 330g.
Sheath: kydex coyote
Packing: Nylon pouch with zipper and logos Medford
Notes: Designed and built by Greg Medford10516D