Led Flashlights Nitecore

KEY FEATURES:
* Ultra lightweight IR (infrared) mini signal light.
* Uses 4 x high performance LEDs.
* Produces IR light (940nm wavelength), red, green and blue light for a total of 9 modes.
* Switch design allows one-handed operation of the flashlight
* Powered by a built-in 250mAh Li-ion battery for up to 75 hours of battery life
* Built-in Li-ion battery charging circuit with USB-C charging port.
* ARC rail adapter on the body and 3 lightweight brackets included to enable multiple mounting and transportation options
* Made of durable PC materials
* Impact resistant up to 1 meter in height





FULL TECHNICAL SPECIFICATIONS:

LEDs: 4x high-power LEDs: infrared, red, blue and green, with a life cycle of 50,000 hours
Operating Modes: 9 operating modes: steady and flashing light for each LED + 1 special mode (blue/red light police warning)
Powers and Durations Fixed Light: Red (3 Lumens / 9h.) - Green (8 Lumens / 9h.) - Blue (2 Lumens / 48h.) - Infrared ( 4h.)
Powers and Durations Flashing Light : Red (3 Lumens / 75h.) - Green (8 Lumens / 75h.) - Blue (2 Lumens / 5h.) - Infrared ( 50h.) - Police Warning ( 56h.)
Method of power on and selection : Central button for power on, power off and light selection
Body: thermoplastic materials
Battery: built-in, non-removable, 250mAh Li-Ion, rechargeable via MicroUSB plug
Measurements of flashlight with bracket: 2.95cm (Length) - 2.95cm (Width,) - 2.54cm (Thickness)
Flashlight weight: 16.7g.
Accessories: Magnetic hook bracket, curved helmet hook bracket, MOLLE system bracket, USB-C charging cable
Waterproofness: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: actual powers and durations, lab-certified

KEY FEATURES:
* Uses 4 x high performance LEDs.
* Offers 9 lighting modes including 4 constant colors + flashing and red/blue flashing
* Powered by a built-in 250mAh Li* ion battery that allows constant light up to 75 hours.
* Built-in Li-ion battery charging circuit via USB-C port
* One-switch design, one-handed operation.
* Built-in power indicator to inform about remaining battery power
* ARC rail adapter on the body and 3 lightweight brackets included to allow multiple mounting and carrying options
* Made of durable plastic materials
* Ultralight and compact design
* Shock resistant up to 1 meter high

FULL TECHNICAL SPECIFICATIONS:
LEDs: 4x high power LEDs, white, red, blue and green, with a life cycle of 50,000 hours
Operating Modes: 9 operating modes: steady and flashing light in 4 colors + 1 special mode (blue/red light police warning)
Powers and Times Fixed Light: Red (3 Lumens / 9h.) - Green (8 Lumens / 9h.) - Blue (2 Lumens / 48h.) - White (15 Lumens / 5.45h.)
Powers and Times of Flashing Light: Red (3 Lumens / 75h.) - Green (8 Lumens / 75h.) - Blue (2 Lumens / 5h.) - White (15 Lumens / 54h.) - Police Warning (56h.)
Power and selection method : Central button for power on, power off and light selection
Body: Thermoplastic materials
Battery: built-in, non-removable, 250mAh Li-Ion, rechargeable via MicroUSB plug
Flashlight size with bracket: 2.95cm (Length) - 2.95cm (Width) - 2.54cm (Thickness)
Flashlight weight: 15.8g.
Accessories: Magnetic hook bracket, curved helmet hook bracket, MOLLE system bracket, USB-C charging cable
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height

Equipped with 4 CREE XP-G3 LEDs with a lifespan of 50,000 hours, the NPL30 has an output of 1200 lumens, a peak intensity of 3,300 cd and a shooting depth of 113 meters. It is powered by 2 CR123A batteries (included) with a maximum autonomy of 1 hour and 45 minutes. Both switches can perform the same functions to provide ambidextrous light activation. Press and hold one of the power buttons to access momentary tactical ignition, short press one of the power buttons to access constant power and triple press one of the power buttons for STROBE mode, which uses randomly changing frequencies for stronger dizzying effects.

There is the standard Picatinny rail mount for quick mounting and compatible with firearms with universal Picatinny rails. Electronic reverse polarity protection ensures safe and stable use. Built-in ATR technology adjusts the NPL30's output based on working conditions and environment to maintain optimum performance. It has an ultralight weight of 130g (4.59oz) (including battery), IP66 waterproof and 1m impact resistant.

Led: 4x Cree XP-G3 - with a life cycle of 50,000 hours
Operating Modes: Press and hold one of the power buttons to access momentary tactical ignition, short press one of the power buttons to access constant power and press one of the power buttons three times for the STROBE mode, which uses frequencies that change randomly for stronger dizzying effects.
Powers and Durations: 1200 lumens (1.45h) Strobo 1200 lumes
Power peak: 3300 cd
Maximum illumination distance: 113m.
Ignition method: double switch, ambidextrous, placed on the sides of the flashlight
Light variation method: double switch, ambidextrous, placed on the sides of the flashlight
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: works with two CR123A batteries (included in the package)
Measurements: 8.1cm (Length) - 3.8cm (Width) - 3.5cm (thickness, sled included)
Weight: 130g. with battery inserted
Accessories: o-rings
Water resistance: as per IP66 standard
Impact resistance: withstands drops from 1m. in height
Notes: Universal quick coupling slide, compatible with Picatinny and Weaver systems

WHAT IS IT FOR?
The TSL10i is a rear cap equipped with a signal light expressly designed and only compatible with the Nitecore torches of the "i-Generation" series (such as the i4000R, P10i, P20i and others).

Offers multiple options for police-style blue, red, green, white and red / blue flashing signaling. During special operations or rapid deployments, the flashing colors are able to represent and indicate different groups to allow quick identification of the members of the various teams in specific positions.

HOW DOES IT WORK?
The TSL10i replaces the original rear cap of the torch, therefore it must be screwed in its place. It allows the torch to be controlled normally with the main power button and the secondary light selection button which also acts as "Strobe Ready".

The TSL10i also has a small additional button placed on the side that allows you to turn on, turn off and select the various flashing functions emitted by the cap itself. The cap is powered directly from the Nitecore "i-Generation" battery already present in the flashlight barrel.

FUNCTIONS AND DURATION:
Blue flashing for a continuous duration of 330h
Red flashing for a continuous duration of 360h
Green flashing for a continuous duration of 300h
White flashing for a continuous duration of 300h
Alternating Red / Blue Police Warning flashing for a continuous duration of 72h

Laboratory tested durations using a 5000mAh Nitecore 21700 "i-Generation" battery

COMPATIBILITY:
It only works with Nitecore flashlights equipped with an "i-Generation" battery (eg P10i, P20i, i4000 etc); it cannot be used with any other type of flashlight or battery.

KEY FEATURES:

* 11 modes available with 5 light sources
* Possibility of continuous light or flashes in 5 different colors
* Built-in lithium-ion battery with a maximum autonomy of 50 hours
* Rechargeable with built-in USB-C port
* One-handed operation of the torch, via a single button
* An indicator light in the flashlight indicates the remaining battery charge (Patent No. ZL201220057767.4)
* Ultralight bracket, with Velcro hooks on the back
* Made of sturdy and quality plastic materials
* Extremely lightweight and pocket-sized design
* Withstands impacts and falls up to 1 meter in height

COMPLETE TECHNICAL SPECIFICATIONS:

Led: 5x high power LEDs, white, red, blue, yellow, green, with a life cycle of 50,000 hours
Operating Modes: 5 colored flashes and a special mode (police warning with blue / red light)
Powers and Durations: Red 3 lumen 50 hr - Green 8 lumen 50 hr - Yellow 9 lumen 50 hr - White 15 lumen 40 hr - Blue 2 lumen 40 hr - Red / Blue 40 hr

Power on and selection method: Central button for power on, off and light selection
Body: thermoplastic materials
Battery: integrated, not removable, 300mAh Li-Ion, rechargeable via MicroUSB-C plug
Torch measurements with bracket: 61.8mm (Length) - 28.9mm (Width) - 21.7mm (Thick.)
Torch weight: 24.5g.
Weight with bracket: 35.5g.
Accessories: support bracket with hooks for the front and rear velcro - USB charging cable
Water resistance: as per IP66 standard
Impact resistance: withstands drops from 1m in height
Note: -

Real powers and durations, certified in the laboratory by ANSI / NEMA FL1 standards

NU series product specially designed for law enforcement.
The NITECORE NU07 LE is a USB-C rechargeable mini sign light with 11 modes and 5 light sources with constant lighting or flashing red, green, yellow,
white / blue and red / blue police alarm.

The completely transparent shell makes the signals identifiable in all directions.

The flashing colors can indicate different groupings or allow for quick identification of team members in specific positions.

Thanks to the ARC adapter it can be attached to the helmet for special operations with quick and secure attachment.

Thanks to the innovative design of the rear clip, it can be easily attached to the standard MOLLE system.

The hook and loop attachment on the back of the bracket ensures a firm and secure fit.
The slots located on both sides of the bracket allow you to strengthen the attachment by fixing the helmet cable or the elastic to prevent accidental loss.

The single button interface is easy to use with a built-in 300mAh rechargeable lithium-ion battery allowing for up to 50 hours of runtime.

The waterproof design makes it IP66 rated.

The body is constructed of solid and durable PC materials with an ultra-light and compact design.

AVAILABILITY AVAILABLE FOR DELIVERY: from 20 July

ULTRAVIOLET LAMP WITH OZONE - STERILIZING SURFACE MAX 40m²

Key features:
* Removes up to 99.99% of spores, germs, viruses and bacteria. The lamp modifies pathogenic microorganisms, viruses, molds through UV light, DNA or RNA, preventing them from reproducing or being harmful. Ozone is a very active oxidant that destroys contact microorganisms, in addition ozone also acts as an environmental deodorant. One of the advantages of ozone is that it can be transported by air to places that UV radiation cannot directly reach.
* Effective against Coronavirus, Mushrooms, Rickettsia, Chlamydia etc.
* Broad spectrum, high potency germicide
* Sanitization with automatic shutdown for 15, 30 or 60 minutes
* Radial quartz lamps with UV-C ultraviolet technology
* Emission of O3 ozone cells for additional sterilization
* Radiation wavelength of 185nm and 254nm
* Simplified design for maximum functionality
* Easily transportable and positioned on flat or hanging surfaces
* Operating commands on the support base or by remote control
* Delayed start to allow the operator to safely leave

Sanitizing applications:
* Home environments
* Commercial structures (shops, offices, restaurants etc)
* Cold rooms
* Food processing plants
* Medical offices, veterinarians, hospitals and operating rooms
* Odor removal

Operating principles:
Germicidal lamps generate short-wave radiation of 185nm radially which, passing through the purest quartz, generate ultraviolet type C (UV-C) waves that are lethal to microorganisms. All surfaces touched directly by ultraviolet waves are therefore sterilized.
At the same time, radiation of 253.7nm produces abundant quantities of ozone (O3) in the surrounding air which, as a very active oxidant, destroys the microorganisms with which it comes into contact. This allows effective sterilization even on surfaces not directly touched by UV-C waves and on all textile surfaces, penetrating deeply and simultaneously eliminating any type of odor, acting as an environmental deodorant.

Technical data:
* Model: ZWXTD-02
* Body material: painted steel
* Lamp material: quartz
* Rated power: 40W
* Sterilizable surface: <40m²
* Operating voltage: 220V / 50Hz
* 40W lamp dimensions: 180x470 mm.
* Lamp weight 40W: 1030 g.
* Life cycle:> 8000 hours
* Control method: on the base or via remote control
* Power on: delayed by 10 seconds
* Operating timer: 15, 30 and 60 minutes

Manual or remote control operation:
1) Plug in the power outlet
2) press the button with the desired sterilization time
3) after 10 seconds, the lamp will turn on and remain active for the set time
ATTENTION: during sterilization the room must be left free by people and animals
4) at the end of the sterilization time, the lamp will automatically turn off
ATTENTION: before staying, ventilate the rooms for at least 40 minutes

Precautions for use:
* The lamp in operation emits ultraviolet radiation, dangerous for exposure, and ozone, dangerous for inhalation.
* Use only in unmanned rooms
* Dangerous for humans, animals and plants
* Do not look directly into ultraviolet light to avoid damage and photodermatitis
* Do not stand near the operating lamp
* Prolonged exposure to ultraviolet light can cause aging and burns to the skin
* Prolonged exposure to ozone can cause asthma and irritation to the respiratory tract
* Ventilate the room before staying to allow the ozone to escape
* Ozone can remain in the room for up to 30/40 minutes after the lamp is turned off

AVAILABILITY AVAILABLE FOR DELIVERY: from 20 July

ULTRAVIOLET LAMP WITH OZONE - MAX STERILIZING SURFACE 100m²

Key features:
* Removes up to 99.99% of spores, germs, viruses and bacteria. The lamp modifies pathogenic microorganisms, viruses, and molds through light, DNA or RNA and therefore prevents them from reproducing or being harmful. Ozone is a very active oxidant that destroys contact microorganisms, in addition ozone also acts as an environmental deodorant. One of the advantages of ozone is that it can be transported by air to places that UV radiation cannot directly reach.
* Effective against Coronavirus, Mushrooms, Rickettsia, Chlamydia etc.
* Broad spectrum, high potency germicide
* Sanitization with automatic shutdown for 15, 30 or 60 minutes
* Radial quartz lamps with UV-C ultraviolet technology
* Emission of O3 ozone cells for additional sterilization
* Radiation wavelength of 185nm and 254nm
* Simplified design for maximum functionality
* Easily transportable and positioned on flat or hanging surfaces
* Operating commands on the support base or by remote control
* Delayed start to allow the operator to safely leave

Sanitizing applications:
* Home environments
* Commercial structures (shops, offices, restaurants etc)
* Cold rooms
* Food processing plants
* Medical offices, veterinarians, hospitals and operating rooms
* Odor removal

Operating principles:
Germicidal lamps generate short-wave radiation of 185nm radially which, passing through the purest quartz, generate ultraviolet type C (UV-C) waves that are lethal to microorganisms. All surfaces touched directly by ultraviolet waves are therefore sterilized.
At the same time, radiation of 253.7nm produces abundant quantities of ozone (O3) in the surrounding air which, as a very active oxidant, destroys the microorganisms with which it comes into contact. This allows effective sterilization even on surfaces not directly touched by UV-C waves and on all textile surfaces, penetrating deeply and simultaneously eliminating any type of odor, acting as an environmental deodorant.

Technical data:
* Models: ZWXTD-04
* Body material: steel
* Lamp material: quartz
* Rated power: 75W
* Sterilizable surface: <100m²
* Operating voltage: 220V / 50Hz
* Lamp dimensions 75W: 200x665 mm.
* Lamp weight 75W: 1380 g.
* Life cycle:> 8000 hours
* Control method: on the base or via remote control
* Power on: delayed by 10 seconds
* Operating timer: 15, 30 and 60 minutes

Manual or remote control operation:
1) Plug in the power outlet
2) press the button with the desired sterilization time
3) after 10 seconds, the lamp will turn on and remain active for the set time
ATTENTION: during sterilization the room must be left free by people and animals
4) at the end of the sterilization time, the lamp will automatically turn off
ATTENTION: before staying, ventilate the rooms for at least 40 minutes

Precautions for use:
* The lamp in operation emits ultraviolet radiation, dangerous for exposure, and ozone, dangerous for inhalation.
* Use only in unmanned rooms
* Dangerous for humans, animals and plants
* Do not look directly into ultraviolet light to avoid damage and photodermatitis
* Do not stand near the operating lamp
* Prolonged exposure to ultraviolet light can cause aging and burns to the skin
* Prolonged exposure to ozone can cause asthma and irritation to the respiratory tract
* Ventilate the room before staying to allow the ozone to escape
* Ozone can remain in the room for up to 30/40 minutes after the lamp is turned off

NITECORE ITALIA warranty: 5 years warranty on the torch; limited warranty on battery and accessories

LED: 1x Cree XM-L2 U2 with a lifespan of 50,000 hours
Output 5 constant light outputs, digitally adjusted and selectable by pressing the appropriate switch mode button and 3 signals (police warning, S.O.S., location beacon)
Powers and durations: 1 lumen (680h.) -> 40 lumens (26h.) -> 250 lumens (6.30h.) -> 450 lumens (2.15h.) -> 1200 (45min.)
Range: up to 130mt.
Peak of power: 4240 candles
Usable batteries: 1x 3.7V 18650 (included in the package) or 2x 3.0 / 3.7V disposable or rechargeable CR123A
Torch dimensions: 86x35 mm.
Weight: 70g (without battery)
Lens: in hardened glass with anti-reflection treatment
Body: in aeronautical aluminum
Finish: anodized, Type III
Strap: elastic, adjustable in diameter and height
Notes: water resistant as per IPX-7 standard
Accessories: 1x 3400mAh 3.7V 18650 battery - USB charging cable - front elastic strap - spare o-ring
Integrated Charging System: through the integrated USB-C port - protected by an insulated cover - and using the USB cable supplied as standard, it is possible to recharge the supplied battery, the operation can be monitored thanks to a special LED light placed next to it. below the light selection buttons. The charging cable can be attached to any PC with a USB port or to any wall or cigarette lighter power supply with a USB port.

Powers and durations certified by ANSI / PLATO FL1-2019 standards tested with 1x 18650 3400mAh