Knife - Essential Tool for Camping, Outdoor Adventure and collection

The knife from Rambo: First Blood, the first installment in the series, is one of the most famous examples of a modern survival knife. Designed by master knife maker Jimmy Lile at the specific request of Sylvester Stallone, it was not intended as a simple prop, but as a real, functional and useful tool in an extreme survival context.

In the film, John Rambo is a former Green Beret veteran of Vietnam, an expert in guerrilla warfare and environmental adaptation. The knife becomes a symbol of his self-sufficiency: a sturdy blade, a serrated back for cutting wood and thin metal, a hollow handle with a waterproof seal to hold a small emergency kit (matches, string, hooks), and a flat pommel that can be used as a hammer or mallet. A sharpening stone was also integrated into the sheath, highlighting the philosophy of “don't depend on anything other than what you carry with you.”

The design of the Rambo 1 knife anticipates the myth of the lone hero capable of surviving against nature and man, and defines an aesthetic that would influence the production of survival knives for the entire following decade. Even today, the original Lile models are considered highly collectible items, testimony to the union between cinema and true knife-making artistry.

Intended use: Collection 
Blade: 420J2 stainless steel
Blade finish: Satin finish and gray coating
Handle: Hollow, made of die-cast aluminum, with the exterior wrapped in paracord; the rear has a screw cap with a bushing that allows access to the compartment containing all the survival accessories (windproof matches, needles, fish hooks, etc.).
Blade length: 225mm.
Blade thickness: 5mm.
Handle length: 105 mm.
Total length: 349 mm.
Balance: Forward, 21 mm from the lower guard branch.
Weight: 418 g.
Sheath: Leather, with sharpening stone.
Notes: Limited and numbered edition with John Rambo's signature on the blade and sheath.

Kukri - Gurkha Army

Nepal's national weapon and its Gurkha warriors are distinguished by their sharp curved blade in the lathe and the weight shift towards the tip that allows very effective gaiters. The grip is straight, no guard. Characteristic is the ricotta (kauri) and the leather sheath covered with two small knives (karda and chakmak).

Blade: Carbon steel
Manicure: black polished horn
Blade length: 265 mm.
Blade thickness: 10 mm.
Total length: 390 mm.
Weight: g.
Sheath: leather and wood, handmade
Notes: Every knife is handmade in Nepal and also includes two small knives.

The knife from Rambo: First Blood Part II — often called the “Mission” or “Rambo II knife” — is the work of master American knife maker Jimmy Lile.

Created at the request of Sylvester Stallone, the model was designed not as a simple movie prop but as a real survival knife: a long, sturdy blade, partially serrated back, and handle designed for prolonged use and to hold small emergency accessories. 

Lile's design, much more aggressive than the knife in the first film, emphasizes the character's transformation into an even more operational and autonomous figure in the field.

The film, released in 1985 and directed by George P. Cosmatos, helped transform this knife into a popular icon: from a functional tool to a symbol of adventure and resilience.

Intended use: Collection 
Blade: 420J2 stainless steel
Blade finish: Satin finish and black coating
Handle: Hollow, made of die-cast aluminum, with the exterior wrapped in paracord; the rear has a screw cap with a bushing that allows access to the compartment containing all the survival accessories (windproof matches, needles, fish hooks, etc.)
Blade length: 10.5 inches.
Blade thickness: 0.2 inches.
Handle length: 100 mm.
Total length: 385 mm.
Balance: Forward, 2 cm from the lower guard branch.
Weight: 505 g.
Sheath: Leather, with diamond sharpener. 
Notes: Limited and numbered edition with John Rambo's signature on the blade and sheath.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Iconic knife handmade in 2021, withdrawn from a private collection, previously purchased
* Condition: in excellent condition, unused and kept solely in a collection
* Available on the market: Currently out of catalog and cannot be ordered/obtained from the craftsman
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: in excellent condition, with signature and date of manufacture
* Manuals, Certificates, and Guarantees: Certificate of guarantee and authenticity with date and technical data of the model
* Checked and certified by our in-house laboratory

THE LEGEND
Jimmy Lile (1933–1991), known as “The Arkansas Knifesmith,” was one of the most important American knife makers of the 20th century. Born in Russellville, Arkansas, he made his first knife at the age of 11 and devoted himself professionally to knife making in 1971.

He is famous for the legendary Rambo knives, designed for real use with 440C blades, hollow handles, and innovative details. He was president of the Knifemakers' Guild, and his works were commissioned by presidents and celebrities.

He died in 1991, leaving a legacy of the highest caliber in custom and collectible knives.

THE PRESENT
Today, the Lile Knives, LLC brand is owned by John Hill of McKinney, Texas. In the 1980s, John was already collaborating with Bob Rankin on the sale of original Rambo knives, and in 2003 he co-authored a book dedicated to Lile's work.

After Jimmy's death, John maintained a strong relationship with Marilyn (Lile) Miller and purchased the Lile brand from her to continue producing high-quality replicas of the movie knives, adhering to custom knife standards and guaranteeing Marilyn royalties.

Since 2011, John Hill has been collaborating with Vaughn Neeley, former owner of Timberline Knives, to produce limited editions of Rambo knives that are prized by collectors. Today, Vaughn produces the entire new “Cerakote™ Series,” while the “Utility Series” is produced under his supervision, keeping alive the tradition and quality of Jimmy Lile's original models.

THE KNIFE
“The Mission” is one of the most iconic survival knives ever made, born from Jimmy Lile's vision to combine extreme functionality and military design.

Featuring a stainless steel blade finished entirely with bead-blasting to eliminate reflections, this model combines tactical aesthetics and real performance.

The back is equipped with aggressive serrations, while the hollow handle, wrapped in paracord, integrates a compass and allows for the transport of small tools.

The multifunction guard features screwdriver tips, making it a complete survival tool. Produced in a limited edition, “The Mission” represents the perfect synthesis between a combat knife, field tool, and collector's item.

Intended use: Collection / Survival

Type of production: entirely handmade
Country of production: USA
Blade: CPM-154CM stainless steel
Blade treatment: Titanium Grey Cerakote
Handle: 316 stainless steel, hollow, waterproof, paracord coated; 316 stainless steel through guard; screw-in aluminum tang with integrated glass breaker and Pyser Optics NATO internal compass
Blade length: 253mm.
Blade thickness: 7 mm.
Total length: 393 mm.
Weight: 573 g.
Sheath: black leather, belt-mounted, for vertical carry, with craftsman's signature and date of manufacture
Packaging: supplied with warranty certificate with date of manufacture and technical details
Notes: iconic knife used in the Rambo films, entirely handmade, with LILE logos and serial number. Previously purchased, never used, from a private collection

WITHDRAWN FROM A PRIVATE COLLECTION

• Type: Previously Purchased
• Condition: In excellent condition
• Market Availability: First version with leather sheath
• Factory Sharpened: Yes
• Blade Marks: None
• Handle Marks: None
• Packaging: Complete, cardboard box with manufacturer logos
• Sheath: Leather
• Manuals, Certificates, and Warranties: Warranty certificates
• Checked and Certified: By our internal laboratory

Intended Use: Roasting

• Production Type: Industrial
• Blade Production: Italy
• Blade: N690Co stainless steel, hardened to 58HRC
• Blade Treatment: Satin finish
• Handle: Forprene
• Blade Length: 300mm
• Blade Thickness: 6.5mm at the handle, 4mm on the blade
• Total Length: 433mm
• Weight: 336g
• Sheath: Black leather
• Packaging: Cardboard box with Extrema Ratio logos
• Note: Also suitable as a sports or collectible knife

Extrema Ratio has applied its rigorous military standards to a series of professional kitchen knives.

The blade is made of tested BOHLER N690 steel, enriched with chromium, vanadium, molybdenum, and cobalt, hardened to 58HRC. The handle is made of Forprene, an elastomer that meets NATO standards for resistance to extreme conditions and is fully removable from the blade, allowing for thorough cleaning and maintenance.

Each knife comes with its own sheath, also derived from military equipment. While not designed to meet hygiene regulations, it ensures safe transport of the extremely sharp blade and protects it from impacts that could reduce its efficiency. We recommend using the sheath only for transportation and long-term storage.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Never used, absolutely like new
* Commercially available: Still in production, hard to find
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Marketed by manufacturer without a box
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

This replica of Major Von Tempsky's 11” Bowie knife is inspired by the design of the knife he created and assigned to his company of Forest Rangers in 1863.

Gustavus Ferdinand von Tempsky (1828-1868) was a German-born adventurer, soldier and artist, known for his role in the New Zealand Wars and for his leadership among the Forest Rangers. His adventurous life and courage made him a legendary figure, particularly in the context of battles between European settlers and Māori peoples.

He learned the advantages of Bowie knife fighting in California during his stint as a prospector, where he had acquired an excellent American-made knife; once he arrived in New Zealand and found himself in charge of Forest Ranger Company No. 2 with the rank of major, he had about 30 Bowie knives made for his men according to his personal design by a blacksmith in Shortland St. Auckland. The Forest Rangers were an elite corps of mounted scouts employed by the colonial government between August 1863 and October 1867 during the New Zealand Wars.

At the time, knives were made of wagon spring steel, one of the few steels available to blacksmiths in Auckland in 1863, and Von Tempsky, an experienced fighter, taught his men the use of the Bowie knife in hand-to-hand combat. The knife was used to defend against enemy blows while a pistol was usually held in the other hand.

In addition to combat, Bowie knives were used to open paths in the forest, dig defensive positions, cut firewood, and for general use while camping.

Use: Heavy Duty / Collection

Type of production: Handcrafted
Country of manufacture: New Zealand
Blade: full tang made of 8670 spring steel, high carbon content
Blade Finish: Direct heat treatment, which goes to create special color play on the blade
Handle: Wenge wood with S-shaped carbon steel through-guard
Blade length: 280mm.
Blade thickness: 7mm.
Total length: 425mm.
Balance: advanced
Weight: 925g.
Sheath: leather
Packaging: unwrapped, sold certificate of warranty and authenticity
Notes: previously purchased knife, never used, from a private collection

The name "Mato Grosso," comes from Portuguese and means "dense bush," recalling the South American region of the same name. This machete is specially designed to cut through the dense vegetation of tropical forests due to its long, narrow blade. It can be used to cut tall, dense grass, thin vegetation, cut branches and open paths in the most inaccessible forests.

Its forprene handle makes it easy to use. The drop blade, milled from Böhler N690 steel hardened to 58 HRC for the best balance of edge hold and strength, is 309 mm long, 4 mm thick and has a flat edge.

Mato Grosso comes with a black Cordura sheath equipped with an M.O.L.L.E. system that allows it to be carried on tactical vests and belts.

Intended Use: Chopper / Machete

Type of production: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co hardened to 54HRC
Blade Treatment: Satin finish
Handle: Forprene
Blade Length: 280mm.
Blade thickness: 4mm.
Total length: 450mm.
Weight: 370g.
Sheath: Nylon with belt and M.O.L.L.E. type attachments.
Packaging: cardboard box with Extrema Ratio logos
Notes: Designed and conceived to cut through the dense broadleaf vegetation typical of tropical and rainforests.

Intended Use: Tactical / Heavy Duty

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Black Powder Coating
Handle: made of Griv-Ex polymer, with steel pommel
Blade length: 267mm.
Blade thickness: 5mm.
Total length: 387mm.
Balance: Advanced
Weight: 474g.
Sheath: Secure-Ex ABS
Packaging: Cardboard box with Cold Steel logos
Notes: -

Intended Use: Tactical

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Stonewashed
Handle: made of Griv-Ex polymer, with steel pommel
Blade length: 267mm.
Blade thickness: 5mm.
Total length: 387mm.
Balance: Advanced
Weight: 474g.
Sheath: Secure-Ex ABS
Packaging: Cardboard box with Cold Steel logos
Notes: Limited and numbered edition with serial number engraved on blade and with Lynn Thompson's autograph on box

Designed by Dan Maragni, the Ontario SP53 Bolo Knife features a 25cm bolo-style blade made of 5160 steel with an epoxy powder coating. The Bolo SP53 knife comes complete with a MOLLE compatible black tactical sheath and is made in the USA.

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 Carbon Steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 257mm.
Blade thickness: 6.4mm.
Total length: 384mm.
Balancing: advanced
Weight: 940g.
Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 250mm.
Blade thickness: 6mm.
Total length: 380mm.
Balancing: advanced
Weight: 425g.
Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

Intended use: Tactical / Military / Survival

Type of production: semi industrial
Blade: full tang in 1095 58HRC carbon steel
Blade finish: Black Traction Coating
Handle: Micarta
Blade length: 200mm.
Blade thickness: 6mm.
Total length: 345mm.
Balancing: advanced
Weight: 449g.
Sheath: Nylon
Notes: design by Laci Szabo

Intended use: Tactical / Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang, in 5160 carbon steel
Blade finish: Cerakote
Handle: Micarta
Blade length: 254mm.
Total length: 406mm.
Balancing: Advanced
Weight: 655g.
Sheath: Nylon and Polyester
Packaging: Cardboard box with Buck logos
Note: -

Intended use: Tactical / Survival / Heavy Utility

Type of production: semi-industrial
Blade: full tang, 1095 58HRC carbon steel
Blade finish: Black Traction Coating
Handle: Micarta
Blade length: 260mm.
Blade thickness: 6mm.
Total length: 425mm.
Balancing: advanced
Weight: 735g.
Sheath: Nylon
Notes: Design By Xtreme Survivalist & Adventurer EJ Snyder

USED KNIFE, TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased and used
* Condition: In good overall condition (see accompanying photos)
* Commercially available 
* Sharpening: Resharpened by our workshop, also clean oxidation which has affected some portions of the edge, which is however back in working order
* Marks on blade: YES
* Marks on handle: YES, various superficial oxidation stains
* Box: Present and original, in cardboard
* Scabbard: in good condition
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: Hunting / Outdoor

Production type: Industrial
Blade production: Taiwan
Blade: Stainless steel 440C differentiated hardening 58/45HRC
Blade Treatment: Mirror polished
Handle: Brass, ebony wood and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Scabbard: Leather
Packaging: Cardboard box
Notes: Accompanied by a whetstone.

The Outback is a clear homage to the knife used by Paul Hogan in the Mr. Crocodile Dundee films, in fact it faithfully follows its shape and dimensions.

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton with steel guard
Blade length: 245mm.
Blade thickness: 6.8mm.
Total length: 380mm.
Balancing: advanced
Weight: 620g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 255mm.
Blade thickness: 6.5mm.
Total length: 385mm.
Balancing: advanced
Weight: 642g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with Ontario Knife Company logos
Note: -

Intended use: Tactical / Utility

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflon coated
Handle: Ultramid
Blade Length: 155mm.
Blade thickness: 5mm.
Total Length: 287mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 338g.
Sheath: kydex

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Manicure: wood
Finishes: Brass
Blade length: 260 mm.
Blade thickness: 9.4 mm.
Total length: 400 mm.
Karda: 110 mm.
Chakmak: 110 mm.
Weight: 426g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

ECLIPSE version, in 1095 carbon steel and sheath and handle in black leather

Intended Use: Hunting / Outdoor

Type of production: Industrial
Production Country: Taiwan
Blade: carbon steel in 1095 to 58 / 59HRC
Blade treatment: mirror polishing
Handle: brass and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Overall length: 405mm.
Weight: 800g.
Sheath: Black Leather
Packaging: cardboard box with Down Under logos, sharpening steel for sharpening
Notes: The Outback is a clear homage to the knife used by Paul Hogan in the movie Crocodile Dundee, it indeed follows closely the shape and size.

Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Covered
Aunlo-Bal: -
Handle: Wood
Blade length: 230mm.
Blade Thickness: 11mm.
Overall length: 395mm.
Karda: horn length. tot. 12mm.
Chakmak: horn length. tot. 12mm.
Weight: 690g.
Sheath: wood and leather
Notes: Nepalese original knife made entirely by hand

Kukri Artisan - Ceremonial Long Aluminum 027 - knife

Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Kukri Artisan - Ceremonial Long Aluminum 027 - knife

Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Collini Cutlery is the official distributor for Italy of tactical knives / collection made in the USA Chris Reeve

Made at the Blade Show in 2014 in a limited edition of only 500 pieces worldwide, the impofu (eland antelope, Lungu in Zulu) is a fixed blade knife largest and most impressive ever produced by Chris Reeve.

Use: Collection / Heavy Utility

Type of production: semi-homemade
Blade: Stainless Steel Tool CPM-3V 58 / 60HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 254mm.
Blade Thickness: 6.8mm.
Length closed: -
Overall length: 413mm.
Balancing: Advanced
Weight: 573g.
Closed: -
Sheath: Black Leather by Gfeller Casemakers
Notes: Production limited to 500 pieces worldwide - Certificate of Authenticity and warranty

Intended use: Chopper / Machete

Type of production: Industrial
Production Lama: Italy
Blade: stainless steel, hardened to 54HRC N690Co
Treatment Lama: Testudo
Handle: Forprene
Blade length: 280mm.
Blade thickness: 4mm.
Length closed: -
Overall length: 450mm.
Thick when closed: -
Balancing: -
Weight: 370g.
Closing: -
Clip: -
Sheath: Nylon with attacks belt and MOLLE type
Packaging: Cardboard box with logos Extrema Ratio
Notes: Studied and designed to sever the thick vegetation broadleaf, typical of tropical forests and rainforests.

Takeshi Saji was born in 1948 in Takefu ( Fukui Prefecture ) , a city located approximately in the center of Japan and in the heart of an area for centuries devoted to the production of blades . His lab is still there, built around the oven thanks to which, for several years now , Takeshi Saji forges the steel (especially damascus) with which he made various models of traditional Japanese knives . The choice of material finishes (mostly natural ) , the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home , have earned him the prestigious title of Master .

Intended use: Collection / Sports / Machete

Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Blade: -
Handle : Wood covered with leather strip
Blade length : 265mm .
Blade thickness : 5mm.
Length closed : -
Overall length: 395mm .
Thick when closed: -
Balancing : -
Weight: 422g .
Closure: -
Clip: -
Sheath: Leather treated
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji

Takeshi Saji was born in 1948 in Takefu ( Fukui Prefecture ) , a city located approximately in the center of Japan and in the heart of an area for centuries devoted to the production of blades . His lab is still there, built around the oven thanks to which, for several years now , Takeshi Saji forges the steel (especially damascus) with which he made various models of traditional Japanese knives . The choice of material finishes (mostly natural ) , the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home , have earned him the prestigious title of Master .

Intended use: Collection / Sports / Machete

Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Blade: -
Handle: Paracord
Blade length : 285mm .
Blade thickness : 5mm.
Length closed : -
Overall length: 420mm .
Thick when closed: -
Balancing : -
Weight: 490g .
Closure: -
Clip: -
Sheath: Wood painted
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji

Ka-Bar - Kukri Machete - 02-1249 - knife

Intended use: military / sports
Type of production: industrial
Blade: 1095 carbon steel - HRC 56-58
Treatment Blade: Teflon
Handle: Kraton ® G
Blade length: 290mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 430mm.
Balance: -
Weight: 600g.
Closing: -
Clip: -
Sheath: tactical leather and Cordura

Notes: -

The ham knife has earned its fame: its shape and sharpness are designed to cut very thin slices of hard food, especially hams. These qualities make the knife also suitable for fruit and vegetables and other meats, as well as for carving roasts.

Forged series
- 26 cm blade
- Total length 38.5 cm

The Handles: made of synthetic material and joined with a triple riveting ensure a perfect seal, excellent stability and guarantee dishwasher safe.
The Blades: are obtained using the best steels and combining the most qualified elements (chromium 15% - carbon 0.5% - molybdenum - vanadium).
The creation of a WUSTHOF forged knife requires the passage of about 40 processing cycles.

Maintenance

Proper maintenance prolongs the life of the knife, makes work easier and safer and reduces the consumption of the wire. Some advices:

- Pay attention that the knives placed in the dishwasher collide with other objects; the blades could be damaged.

- Knives guaranteed for dishwashers that are not immediately washed in the machine should be rinsed under the water tap to remove the remains of highly corrosive foods (fats, vinegar, fruit juices).

- Make sure if the knives no longer cut perfectly, have them rectified or sharpened by professionals in the sector.

The WUSTHOF knives sold by us are personally checked and further sharpened, in order to guarantee you the certainty of an excellent purchase.

All Wusthof products we sell are indelibly silk-screened with the Coltelleria Collini logo (as shown in the image). This marking guarantees the buyer to have the certainty of quality, traceability, guarantee over the years and a future privileged assistance on the product purchased from Coltelleria Collini.

Specifications:
Blade Length: 16"
Overall Length: 22"
Steel: 1055 Carbon Steel w/ Black Baked on Anti Rust Matte Finish
Weight: 23.4 oz
Blade Thickness: 2.8 mm
Handle: 5 5/8" Long. Polypropylene
Sheath: Cor-Ex™ Sheath

Made from tough rigid 1055 carbon steel with a strong spring temper, it's virtually unbreakable and offers the weight forward balance necessary to chop through vines, saplings, and brush and even trees with ease. What's more, its sharp point offers plenty of belly for slashing or even skinning, and in an emergency, adds to it value as an improvised self defense tool. Sold fully sharpened, and shipped with a sturdy nylon sheath, it's ready for your jungle wherever it may be.

Intended Use: Collection

Type of production: Industrial
Production Lama: China
Blade: AUS-6 stainless steel
Treatment Lama: -
Handle material: Wood and avoriolina scrimshaw printed with "The Expendables"
Blade length: 300mm.
Blade thickness: 5mm.
Length closed: -
Total length: 440mm.
Thick when closed: -
Balance: -
Weight: 675g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Guard and false gold plated brass - Warranty - Cardboard box with logos The Expendables
Notes: Exact replica behind movie licenses in the film directed by and starring Sylvester Stallone: The Expendables II (Mercenaries II)

Intended use: Sport / Collection

Type of production: Industrial
Blade production: Taiwan
Blade: 440C stainless steel with selective tempering
Blade treatment: -
Handle: Leather rings
Blade length: 285mm.
Blade thickness: 5.5mm.
Closed length: -
Total length: 415mm.
Thickness when closed: -
Balance: -
Weight: 630g.
Lock: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with Down Under Knives logos
Notes: -

Destination: Machete/Utlity

Type of production: Industrial
Blade Made in: Italy
Blade: stainless steel 440C
Handle: hard rubber
Blade Length: 270mm.
Blade Thickness: 3.5mm.
Total Length: 430mm.
Balance: toward the tip, at about 3cm from knife's guard
Weigth: 450g.
Sheath: Nylon
Packaging: carton box
Disegned and developed in collaboration with Alfredo Doricchi

Kukri - Operation Iraqi Freedom

Arma nazionale del Nepal e dei suoi guerrieri Gurkha, si distingue per la sua lama ricurva affilata nel latoconcavo e per lo spostamento del peso verso la punta che consente fendenti molto efficaci. L’impugnatura è diritta, senzaguardia. Caratteristico il ricasso (kauri) e il fodero di legno ricoperto di cuoioin cui sono contenuti anche due piccoli coltelli (karda e chakmak).

Lama: full tang in Acciaio al carbonio
Manicatura: Legno
Lunghezza lama: 275mm.
Spessore della lama: 10mm.
Lunghezza totale: 415mm.
Peso: 710g.
Fodero: in cuoio e legno, realizzato a mano
Note: ogni coltello e' interamente realizzato a mano in Nepal e comprende anche due piccoli coltelli.

Intended use: Hunting / Outdoor

Type of production: Industrial
Production Blade: Taiwan
Blade: 440C stainless steel hardened differentiated 58/45HRC
Treatment Blade: Mirror polishing
Handle: Brass, ebony wood and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Sheath: In leather, crocodile-like
Packaging: cardboard box with logos Down Under, sharpener for sharpening
Notes: The outback is a clear homage to the knife used by Paul Hogan in Crocodile Dundee movie, in fact faithfully reproduces the shape, size and material as the one used for filming.

Takeshi Saji - Mikatsuki Green 270 - Knife ArtigianaleTakeshi Saji - Mikatsuki Green 270 - Craft Knife

Intended use: Collection / Sports / Machete

Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Blade: -
Handle: Paracord
Blade length: 285mm.
Blade thickness: 5mm.
Length closed: -
Overall length: 420mm.
Thick when closed: -
Balancing: -
Weight: 490g.
Closure: -
Clip: -
Sheath: Wood painted
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji