Knife - Essential Tool for Camping, Outdoor Adventure and collection

The knife from Rambo: First Blood, the first installment in the series, is one of the most famous examples of a modern survival knife. Designed by master knife maker Jimmy Lile at the specific request of Sylvester Stallone, it was not intended as a simple prop, but as a real, functional and useful tool in an extreme survival context.

In the film, John Rambo is a former Green Beret veteran of Vietnam, an expert in guerrilla warfare and environmental adaptation. The knife becomes a symbol of his self-sufficiency: a sturdy blade, a serrated back for cutting wood and thin metal, a hollow handle with a waterproof seal to hold a small emergency kit (matches, string, hooks), and a flat pommel that can be used as a hammer or mallet. A sharpening stone was also integrated into the sheath, highlighting the philosophy of “don't depend on anything other than what you carry with you.”

The design of the Rambo 1 knife anticipates the myth of the lone hero capable of surviving against nature and man, and defines an aesthetic that would influence the production of survival knives for the entire following decade. Even today, the original Lile models are considered highly collectible items, testimony to the union between cinema and true knife-making artistry.

Intended use: Collection 
Blade: 420J2 stainless steel
Blade finish: Satin finish and gray coating
Handle: Hollow, made of die-cast aluminum, with the exterior wrapped in paracord; the rear has a screw cap with a bushing that allows access to the compartment containing all the survival accessories (windproof matches, needles, fish hooks, etc.).
Blade length: 225mm.
Blade thickness: 5mm.
Handle length: 105 mm.
Total length: 349 mm.
Balance: Forward, 21 mm from the lower guard branch.
Weight: 418 g.
Sheath: Leather, with sharpening stone.
Notes: Limited and numbered edition with John Rambo's signature on the blade and sheath.

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; has minor scuffs on the tip of the blade and on the spine of the knife
* Commercial Availability: Discontinued in this configuration
* Sharpening: Factory-sharpened
* Marks on blade: Minor scuffs on the tip of the blade and the spine of the knife
* Marks on handle: None
* Box: Missing
* Sheath: Present and in good condition
* Manuals, Certificates, and Warranties: Missing
* Inspected and certified by our in-house laboratory

Continuing the glorious tradition of Chris Reeve Knives that pay tribute to elite military forces, the Reeve/Harsey collaboration has given rise to the Pacific, the civilian version of a knife created to celebrate the 50th anniversary of the 1st Special Forces Group (Airborne).

Intended Use: Collectible / Utility

Manufacturing Type: Midtech
Country of Manufacture: Boise, Idaho, USA
Blade: CPM-S35VN steel
Surface Treatment: CeraKote
Handle: Black Canvas Micarta
Blade Length: 150 mm.
Blade thickness: 5.58 mm.
Overall length: 292 mm.
Balance: on the lower guard
Weight: 329 g.
Sheath: Nylon thigh sheath, M.O.L.L.E.-compatible
Notes: Previously purchased knife—from a private collection

KNIFE FROM A PRIVATE COLLECTION
* Origin: Previously purchased knife from a private collection
* Condition: 2008 model, overall in excellent condition
* Commercial Availability: Discontinued
* Sharpness: Factory-sharpened, could be improved
* Blade Condition: Minor cosmetic marks on the DLC finish due to age
* Handle Condition: None
* Box: -
* Sheath: Included
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The Zero Tolerance 0100 is one of the first knives produced by Zero Tolerance, the premium division of Kai USA, which was launched in 2006 to develop professional tools for military personnel, law enforcement, and first responders. The 0100 model was, in fact, one of the first three fixed-blade knives in the original lineup, alongside the 0121 and 0150 models.

The design bears the unmistakable stylistic signature of Ken Onion, the renowned American designer already responsible for numerous successes at Kershaw. The distinctive “S”-curved blade offers an unusual combination of cutting ability, power, and precision, making the ZT0100 suitable for both tactical applications and the most demanding outdoor use.

For its construction, Zero Tolerance chose CPM 3V, a steel then considered cutting-edge for its strength and impact resistance, paired with a tungsten DLC coating and three-dimensionally machined G-10 scales. This combination helped solidify the brand’s early reputation as a manufacturer of “overbuilt” knives, designed without compromise for field use.

Today, the ZT 0100 is a discontinued model particularly prized by collectors, as it is considered one of the knives that helped define the Zero Tolerance brand’s identity in its early years.

Intended Use: Tactical / Sporting / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Full tang, CPM-3V carbon steel
Blade Finish: Tungsten DLC coating
Handle: G10
Blade Length: 146mm.
Blade thickness: 4.8 mm.
Overall length: 267 mm.
Weight: 317 g.
Sheath: Nylon, belt-mounted, with thermoformed Kydex lining
Packaging: -
Notes: Previously purchased knife, from a private collection

The artisanal Mozzetta by Piscitelli represents the perfect blend of Italian tradition and everyday functionality, an accessory with authentic charm designed for those who appreciate objects crafted with care and character. Entirely produced in Frosolone (IS), the historic center of Molise cutlery, this Mozzetta preserves the essential style of traditional Italian knives, reinterpreted through natural materials and high-quality artisanal craftsmanship.

The elegant olive wood handle makes each piece unique in hue and grain, while the compact and harmonious design enhances its practicality and portability. The satin-finished stainless steel blade, with its clean and traditional profile, offers reliability for daily use and gives the knife a understated yet distinctive aesthetic, ideal for both enthusiasts and collectors alike.

Compact and lightweight, the Piscitelli pocket knife is a small symbol of Italian artisanal culture: a simple, authentic, and timeless knife, capable of accompanying every moment of the day with style, from outdoor life to the most informal social gatherings.

Intended use: Collectible / Sports use

Production type: Handcrafted
Country of origin: Italy (Frosolone, IS)
Blade: 420 stainless steel
Blade finish: Satin
Handle: Olive wood
Blade length: 85mm.
Blade thickness: 2.5mm.
Closed length: 108 mm.
Total length: 194 mm.
Weight: 49 g.
Closure: No locking mechanism / free-floating blade
Packaging: Cardboard box with manufacturer’s logos and information sheet
Notes: Each horn handle is unique in grain and color; as it is handcrafted, there may be aesthetic variations

This knife was previously purchased and comes from a private collection
* Origin: Acquired from a private seller, previously purchased
* Condition: Overall in good condition, with some signs of age and a couple of small scratches on the tip of the blade
* Currently available: Currently in the catalog with Desert Ironwood and a stainless steel guard
* Sharpness: Factory-sharpened, could be improved
* Marks on blade: A couple of small scratches on the tip of the knife, possibly due to product handling
* Marks on handle: None
* Box: Present, shows signs of age
* Sheath: Present, like new
* Manuals, Certificates, and Warranties: /
* Inspected and Certified by our in-house laboratory

The “Tre Kronor” line blends the latest martensitic technologies with the ancient roots of the Swedish royal family. In fact, these knives are the only ones that bear the royal symbol of the three crowns on the blade and on the beautiful wooden box that contains the knife and sheath.

The laminated steel used is currently one of the finest industrial steels on the market and consists of an inner layer of 62HRC powder-molded SGPS paired with two outer layers of VG2. The knives thus exhibit exceptional cutting performance, penetration, and edge retention.

Intended Use: Hunting / All-rounder Utility

Production Type: Industrial
Country of Manufacture: Sweden
Blade: 3G laminated stainless steel with a 62 HRC SGPS cutting edge
Blade Finish: Satin
Handle: Riveted cocobolo wood, with nickel silver guard
Blade Length: 100 mm.
Blade thickness: 4.5mm.
Overall length: 215mm.
Weight: 14g.
Sheath: Heavy leather, with vertical belt loop
Packaging: Wooden box with manufacturer’s logos and cardboard outer box
Notes: Knife from a private collection, previously purchased

Pioneer X Alox Limited Edition 2026: limited edition elegance
Unique and intelligent, the Pioneer X Alox Limited Edition 2026 reveals elegance and focus from every angle. In Glacial Blue, this year's exclusive color, a fresh and sparkling shade that embodies the silent strength and resilience of alpine ice. Masterfully crafted with durability in mind and nine integrated functions, it is a reliable companion for years to come.

An edition that makes a difference
Designed to satisfy both avid collectors and lovers of the Victorinox brand, this limited edition captivates at first glance. Its exclusive design and Stone Red hue make it a unique accessory, ideal for those who love exclusive, high-end products.

Performance that surprises every time
The Pioneer X Alox is not just about aesthetics: with a range of highly functional tools, this multi-purpose tool is the essence of versatility. From the sturdy blade to the precision scissors, every detail is designed to ensure excellent performance, wherever you are.

Uncompromising quality
Made from the highest quality materials and designed to last, the Pioneer X Alox is synonymous with reliability and durability. The iconic Alox handles not only protect the multi-tool, but also add a sophisticated and contemporary touch, making it a real gem.

An unforgettable collection
The Pioneer X Alox is part of the prestigious Limited Edition Alox 2026 collection, which also includes the Classic SD Alox and Evoke Alox models. Combining elegance and practicality, this collection captures the attention of Victorinox collectors and enthusiasts, representing the perfect blend of tradition and innovation.

Functions:
1. large blade (length 70 mm)
2. reamer
3. can opener
4. small screwdriver (also for Phillips screws)
5. cap lifter
6. screwdriver 
7. wire stripper
8. key ring
9. scissors

Technical details:
Thickness: 14.9 mm
Length: 93 mm
Weight: 94.5 g
Handle material: aluminum

KNIFE RETIRED FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private collector, previously purchased – SERIAL NUMBER 21-0076
* Condition: Overall good, never used
* Market availability: Currently discontinued
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: not included
* Sheath: Kydex
* Manuals, Certificates & Warranty: not included
* Inspected and Certified by our internal laboratory

Based on the renowned MK-8, designer Dietmar Pohl developed the Tactical Eight, achieving a lighter and more compact tactical knife.

The robust Bowie blade, over 17 cm long and 6 mm thick, is suitable for a wide range of applications. To ensure excellent edge retention and blade resilience, the well-known D2 tool steel was selected.

The stonewashed finish creates a scratch-resistant surface and further improves corrosion resistance. A concealed hole at the end of the handle scales allows for the attachment of a lanyard (included).

The Tactical Eight Kydex® sheath, with a material thickness of 2.5 mm, provides a solid foundation for a durable and well-engineered carry system, fully meeting the demanding requirements of a tactical knife.

Intended use: Collection / Sport

Blade: Full tang D2 steel, 59/60 HRC
Handle: G-10
Blade length: 174 mm
Blade thickness: 6 mm
Overall length: 315 mm
Weight: 375 g (534 g with sheath)
Sheath: Kydex
Packaging: -

The Chris Reeve Green Beret 7" Knife – 2025 Version, designed by the renowned William W. Harsey, represents one of the highest expressions of modern high-performance tactical knives. Born from the collaboration between Chris Reeve Knives and U.S. Special Forces, the Green Beret is an iconic blade, highly regarded both in operational environments and in high-end knife collecting. This new 2025 version introduces the outstanding CPM-MagnaCut steel, heat-treated to 61/62 HRC, offering an exceptional balance of edge retention, corrosion resistance, and structural toughness.

The 7-inch blade with Black PVD coating ensures tactical discretion and enhanced protection, while the Black Canvas Micarta handle provides a secure grip and absolute control in all conditions. Semi-industrially manufactured in the United States, in Boise, Idaho, the Green Beret 7" is perfectly balanced on the lower guard branch and comes complete with a M.O.L.L.E.-compatible nylon thigh sheath, as well as official certificates of authenticity and warranty. A knife designed for those who demand the very best, both as a fighter tool and as a premium collector’s piece.

Technical Specifications
Intended use: Collection / Fighter
Production type: Semi-industrial
Country of manufacture: Boise – Idaho – USA
Blade: CPM-MagnaCut stainless steel, hardened to 61/62 HRC
Blade finish: Black PVD
Handle: Black Canvas Micarta
Blade length: 180mm
Blade thickness: 5.58mm
Overall length: 315mm
Balance: On the lower guard branch
Weight: 363g
Sheath: Nylon thigh sheath, M.O.L.L.E. compatible
Notes: New 2025 version – Warranty and authenticity certificates – Design by William W. Harsey

The Wander Tactical Smilodon Custom Edition is a high-end semi-custom knife designed to meet the needs of blade enthusiasts and demanding professionals.

This knife combines premium materials with a robust and functional design, ideal for outdoor activities, survival, and collecting. The D2 steel blade with a raw Dual Tone finish ensures superior wear resistance and long-lasting sharpness, while the black Micarta handle provides a secure and comfortable grip in any situation.

Each piece is handcrafted in custom production, ensuring exceptional quality and uniqueness.

Production Type: Handmade
Blade Production: Italy
Blade: D2 steel, 59/60HRC
Blade Treatment: Dual Tone Raw Finish
Handle: Micarta
Blade Length: 185mm
Blade Thickness: 5mm
Total Length: 360mm
Balance: Rear
Weight: 590g
Sheath: Thermoformed Kydex with Tek-Lok attachment
Packaging: -
Notes: Each knife is handmade and unique; slight variations in finishes, colors, and materials may be present compared to the photographed product.

Continuing the glorious tradition of Chris Reeve Knives that pay tribute to elite military forces, the Reeve/Harsey collaboration has created the Pacific, the civilian version of a knife created to celebrate the 50th anniversary of the 1st Special Forces Group (Airborne).

Intended use: Collection / Utility

Type of production: Midtech
Country of production: Boise - Idaho - USA
Blade: CPM-MagnaCut steel at 61/62HRC
Surface treatment: CeraKote
Handle: Black Canvas Micarta
Blade length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thigh sheath, M.O.L.L.E. compatible
Notes: Warranty and authenticity certificates - Design by William W. Harsey

Continuing the glorious tradition of Chris Reeve Knives that pay tribute to elite military forces, the Reeve/Harsey collaboration has created the Pacific, the civilian version of a knife created to celebrate the 50th anniversary of the 1st Special Forces Group (Airborne).

Intended use: Collection / Utility

Type of production: Midtech
Country of production: Boise - Idaho - USA
Blade: CPM-MagnaCut steel at 61/62HRC
Surface treatment: CeraKote
Handle: Black Canvas Micarta
Blade length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thigh sheath, M.O.L.L.E. compatible
Notes: Warranty and authenticity certificates - Design by William W. Harsey

The knife from Rambo: First Blood Part II — often called the “Mission” or “Rambo II knife” — is the work of master American knife maker Jimmy Lile.

Created at the request of Sylvester Stallone, the model was designed not as a simple movie prop but as a real survival knife: a long, sturdy blade, partially serrated back, and handle designed for prolonged use and to hold small emergency accessories. 

Lile's design, much more aggressive than the knife in the first film, emphasizes the character's transformation into an even more operational and autonomous figure in the field.

The film, released in 1985 and directed by George P. Cosmatos, helped transform this knife into a popular icon: from a functional tool to a symbol of adventure and resilience.

Intended use: Collection 
Blade: 420J2 stainless steel
Blade finish: Satin finish and black coating
Handle: Hollow, made of die-cast aluminum, with the exterior wrapped in paracord; the rear has a screw cap with a bushing that allows access to the compartment containing all the survival accessories (windproof matches, needles, fish hooks, etc.)
Blade length: 10.5 inches.
Blade thickness: 0.2 inches.
Handle length: 100 mm.
Total length: 385 mm.
Balance: Forward, 2 cm from the lower guard branch.
Weight: 505 g.
Sheath: Leather, with diamond sharpener. 
Notes: Limited and numbered edition with John Rambo's signature on the blade and sheath.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Acquired from a private owner, previously purchased and used
* Condition: Overall good, with marks and scratches on the blade and guard. The sheath shows signs of wear.
* Commercial availability: Discontinued
* Edge: Original
* Box: Included
* Sheath: Included
* Manuals, Certificates, and Warranties: Included
* Inspected and Certified by our internal laboratory

The ExtremaRatio 39‑09 Operativo is a tactical collector's knife that combines the prestigious Italian military tradition with the precision of modern engineering. Inspired by the silhouette of the 1939 "paratrooper assault dagger", this model is built with premium materials and military-grade finishes that meet operational standards.

Its matte black coating, absence of flashy logos, and overall sturdiness make it ideal for discerning collectors, tactical blade enthusiasts, and those who value operational tools with strong symbolic meaning.

Every detail, from the Böhler N690 steel blade to the Forprene handle, is designed to ensure a balance of aesthetics, functionality, and reliability.

Intended use: collection / display / symbolic tactical use
Production type: high-end industrial manufacturing
Country of production: Italy
Blade: Böhler N690 steel, hardened (~ 58 HRC)
Blade finish: black oxide coating (MIL‑C‑13924 burnishing, non-reflective)
Handle: black Forprene
Blade length: 195 mm
Blade thickness: 6.3 mm
Total length: 319 mm
Weight: 338 g
Locking mechanism: fixed blade (not a folding knife)
Packaging: standard manufacturer box / rigid thigh sheath / nylon leg sheath

The Wander Tactical Smilodon Custom Edition is a high-end handmade knife designed to meet the needs of blade enthusiasts and demanding professionals.

This knife combines premium materials with a robust and functional design, ideal for outdoor activities, survivalism, and collecting. The D2 steel blade with a raw finish ensures superior wear resistance and long edge retention, while the black Micarta handle provides a secure and comfortable grip in any situation.

Each piece is carefully crafted in custom production, ensuring quality and uniqueness in every item.

Intended use: Outdoor / Hard Utility

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Raw
Handle: Micarta
Blade length: 195mm.
Blade thickness: 5mm.
Total length: 360mm.
Balance: rearward
Weight: 672g.
Sheath: Kydex, thermoformed, with belt loop attachment, M.O.L.L.E. compatible.
Packaging: no packaging - supplied with certificate of guarantee and authenticity.
Notes: Each knife is unique and made entirely by hand.

KNIFE FROM A PRIVATE COLLECTION
* Type: Previously purchased knife from a private collection
* Condition: Like new
* Availability: Rare and hard to find
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Original
* Sheath: In excellent, complete condition
* Manuals, Certificates & Warranty: Ka-Bar
Inspected and certified by our in-house laboratory

The KA-BAR BK72 represents the ultimate evolution of a survival knife icon. As the heir to the famous Becker BK2/BK22, it retains their toughness and reliability while enhancing performance thanks to the premium CPM S35VN steel. Built full tang with a 6.35 mm thick blade, it offers outstanding strength and optimal handling.

The black micarta handle ensures a firm grip in any condition, while the available finishes — stonewashed or black DLC coating — provide a modern and functional aesthetic. A knife that combines durability, precision, and style, perfect for outdoor, survival, and professional use.

Intended use: survival / outdoor / heavy-duty
Production type: exclusive Knivesandtools edition (KA-BAR–Knivesandtools collaboration)
Country of origin: USA
Blade: CPM S35VN steel (full tang, 6.35 mm thick)
Blade finish: stonewashed (KABK72) or black DLC coating (KABK72BK)
Handle: black micarta
Blade length: approx. 13.2 cm
Blade thickness: 6.35 mm
Closed length: 107 mm
Overall length: approx. 270 mm
Closed thickness: estimated between 12–15 mm
Weight: approx. 435 g
Locking mechanism: fixed blade, no locking system
Clip: none (includes kydex sheath)
Packaging: original box
Notes: hardness approx. 58 HRC

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: In excellent condition, shows a scratch of about 2.5 cm on the blade
* Commercial Availability: Hard to find
* Sharpening: Factory edge, can be improved
* Blade Marks: shows a scratch of about 2.5 cm on the blade
* Handle Marks: -
* Box: -
* Sheath: in excellent condition, complete
* Manuals, Certificates and Warranties: -
Checked and Certified by our in-house workshop

The Buck 192 Vanguard is a premium-quality hunting knife, made in the USA and designed to deliver outstanding performance in all outdoor situations. The ergonomic handle made of fine wood with brass fittings gives the knife a classic and sturdy appearance, while the drop point blade in 420HC stainless steel ensures a reliable and long-lasting cut.

192 - with hyphen: this model features the marking “192-”, a production detail found on Buck knives made in the 1990s. This makes the knife particularly interesting for collectors and fans of the American brand.

Blade length: 102 mm
Total length: 216 mm
Blade material: 420HC stainless steel
Handle: fine wood with brass bolsters and scales
Sheath: high-quality brown leather
Production: Made in USA

This knife is ideal for hunting, hiking, camping, or as a collectible item. The Buck 192 Vanguard combines functionality, design, and reliability in a single tool appreciated worldwide.

Boker Magnum Collection 2025 – Nathan “The Machinist” Carothers
The Boker Magnum Collection 2025 celebrates excellence in design and functionality with the signature of Nathan “The Machinist” Carothers, master knife maker and American machinist.

Limited to just 1999 pieces, this collector's knife boasts a sturdy full tang construction, a drop point blade in BKR-10 steel with a double finish, brushed and satin, and screwed G10 scales for a secure grip.  BKR-10 steel, developed exclusively for Boker, offers corrosion resistance, high hardness, and performance comparable to Japanese VG-10.

Supplied in an elegant wooden box, complete with black leather sheath with belt loop and certificate of authenticity.

Intended use: Collection / Utility

Type of production: Industrial
Country of production: China
Blade: full tang in BKR-10 steel
Blade finish: Satin
Handle: G10
Blade length: 151mm.
Blade thickness: 4.7mm.
Total length: 275mm.
Weight: 264g.
Sheath: leather
Packaging: wooden box with warranty certificate and microfiber cleaning cloth
Notes: Limited edition of only 1999 pieces

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, a few imperceptible marks on the blade and a few imperceptible spots of oxidation
* Available on the market: Out of production and difficult to find
* Sharpness: Factory sharp
* Marks on blade: a few imperceptible marks on the blade and a few imperceptible spots of oxidation 
* Marks on handle: None
* Box: None
* Sheath: A couple of small marks from storage
* Manuals, Certificates, and Warranties: None
* Checked and certified by our in-house laboratory

The Temperance 2 is Spyderco's answer to the need for a medium-sized fixed blade knife for heavy-duty use. Designed in-house by Sal Glesser for camping, general use, and MBC (Martial Blade Craft), this versatile knife also has a place in the kitchen, where Sal himself uses it both indoors and outdoors.

Made from high-quality VG-10 stainless steel, it features a thick, wide blade with a spear-point profile and flat grind on both sides for excellent cutting performance. The knurling on the spine and finger choil ensure maximum control and precision, while the sturdy construction makes it ideal for survival, hunting, camping, and food preparation.

The Canvas Micarta handle provides a secure grip, excellent grip, and quick indexing during MBC techniques. The flat pommel acts as a leverage point for the thumb in reverse or rearward grips. The Temperance 2 comes with a Boltaron sheath and 5-position Tek-Lok for versatile carry.

Intended use: All-round utility/MBC

Type of production: industrial
Blade: VG10 stainless steel
Blade finish: satin
Country of manufacture: Japan
Handle: Canvas Micarta
Blade length: 124mm.
Blade thickness: 4 mm.
Total length: 247 mm.
Weight: 192 g.
Sheath: Boltaron, with multi-position Tek-Lok attachment
Notes: First series (2010/2015) of the Temperance 2 model; from the second series onwards, the sheath has been made of leather.

Intended use: Collection
Production type: Handcrafted
Country of manufacture: France
Blade: Stainless steel
Blade finish: Satin with “Ebène – Ebony – Ebenholz” engraving
Handle: Matte ebony wood
Blade length: 100mm
Blade thickness: 3mm
Closed length: 107mm
Total length: 207mm
Closed thickness: 12mm
Weight: 75g
Locking mechanism: Slipjoint
Clip: None
Packaging: Gift box with Eiffel Tower certificate
Notes: Brass plate with engraved Eiffel Tower, hand guilloché, special Paris edition

The Laguiole Hunting Knife embodies the pinnacle of traditional French craftsmanship, designed for those seeking a rare combination of beauty and functionality. Featuring a handcrafted Damascus steel blade, this hunting knife stands out for the elegant wavy pattern on the blade, the result of a refined and complex technique.

The handle, made from genuine natural horn tip, gives each piece its own uniqueness, while the spine is adorned with fine hand-engraved guilloché – a signature of artisanal mastery. Solid, sharp, and extraordinarily elegant, it’s a collector’s item for true Laguiole enthusiasts.

Intended use: Collection / Hunting
Production type: Handmade
Country of origin: France
Blade: Welded Damascus steel
Blade finish: Visible Damascus, polished
Handle: Natural horn tip
Blade length: 120mm
Blade thickness: 3.5mm
Closed length: 140mm
Total length: 260mm
Closed thickness: 13mm
Weight: 190g
Locking mechanism: Slipjoint
Clip: None
Packaging: Leather sheath and gift box
Notes: Guilloché engraving entirely handmade, natural material handle – each piece is unique

Use: Collection
Production type: Handcrafted
Country of origin: France
Blade: Sandvik stainless steel
Blade finish: Satin
Handle: Stabilized Fire Red Elder Burl wood
Blade length: 100mm
Blade thickness: 3mm
Closed length: 107mm
Total length: 207mm
Closed thickness: 12mm
Weight: 90g
Locking mechanism: Slipjoint
Clip: None
Packaging: Gift box with certificate of authenticity
Notes: hand-engraved spring with globe motif, handcrafted from natural materials

The Wander Tactical - Uro Saw Custom Edition Knife is a high-quality handcrafted knife, made entirely in Italy, designed for knife enthusiasts and those looking for a versatile and reliable tool in any situation.

The D2 steel blade, with a hardness between 59 and 60 HRC, features a back saw, ideal for intensive cuts and emergency operations. The Acid Raw finish gives the blade a distinctive appearance and added protection against corrosion. The Micarta handle provides a secure and comfortable grip even in difficult conditions.

With an overall length of 298 mm, a 154 mm blade and a weight of 478 g, this knife offers strength and advanced balance for optimal handling. The M.O.L.L.E.-compatible Kydex sheath allows for easy and safe carrying.

Each knife is handcrafted with an attention to detail that makes it a unique piece and comes with a certificate of authenticity.

Type of production: Handcrafted

Country of production: Italy
Blade: D2 steel at 59/60HRC equipped with a back saw
Blade Finish: Acid Raw Finish
Handle: Micarta 
Blade Length: 154mm.
Blade thickness: 6.5mm.
Total Length: 298mm.
Balance: advanced
Weight: 478g.
Sheath: made of Kydex, thermoformed, with M.O.L.L.E. compatible belt loop attachment.
Packaging: offered by the manufacturer without packaging, accompanied by certificate of authenticity
Notes: Each knife is unique and handcrafted

The Wander Tactical Smilodon Compound Custom Edition is a high-end handcrafted knife designed to meet the needs of the most demanding blade enthusiasts and professionals.

This knife combines premium materials with a rugged and functional design, ideal for outdoor activities, survivalism and collecting. The D2 steel blade with Ice Brush finish provides superior wear resistance and long edge life, while the Micarta handle provides a secure and comfortable grip in any situation.

Each piece is carefully handcrafted in custom production, ensuring quality and uniqueness to each specimen.

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Ice Brush
Handle: Micarta
Blade length: 195mm.
Blade thickness: 5mm.
Total length: 360mm.
Balance: backward
Weight: 615g.
Sheath: made of Kydex, thermoformed, with M.O.L.L.E. compatible belt loop attachment.
Packaging: offered by manufacturer without packaging, accompanied by certificate of authenticity
Notes: Each knife is unique and handcrafted

Wander Tactical Smilodon Custom Edition is a high-end semi-handcrafted knife designed to meet the needs of blade enthusiasts and the most demanding professionals.

This knife combines top-quality materials with a robust and functional design, ideal for outdoor activities, survival, and collecting. The D2 steel blade with raw finish ensures superior wear resistance and long-lasting sharpness, while the black Micarta handle provides a secure and comfortable grip in any situation.

Each piece is crafted with artisanal care in a custom production process, ensuring quality and uniqueness in every model.

Production Type: Handcrafted
Blade Production: Italy
Blade: D2 steel, 59/60HRC
Blade Finish: Raw Finish
Handle: Micarta
Blade Length: 189 mm
Blade Thickness: 5 mm
Overall Length: 360 mm
Balance: Rearward
Weight: 590 g
Sheath: Thermoformed Kydex with Tek-Lok attachment
Packaging: -
Notes: Each knife is unique and handcrafted; slight variations in finish, colors, and materials may occur compared to the photographed product.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: Collected from a private individual, previously purchased.
* Condition: Never used, absolutely like new
* Commercially available: Still in production, hard to find
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Marketed by manufacturer without a box
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

This replica of Major Von Tempsky's 6.5” Bowie knife is inspired by the design of the knife he created and assigned to his company of Forest Rangers in 1863.

Gustavus Ferdinand von Tempsky (1828-1868) was a German-born adventurer, soldier and artist, known for his role in the New Zealand Wars and for his leadership among the Forest Rangers. His adventurous life and courage made him a legendary figure, particularly in the context of battles between European settlers and Māori peoples.

He learned the advantages of Bowie knife fighting in California during his stint as a prospector, where he had acquired an excellent American-made knife; once he arrived in New Zealand and found himself in charge of Forest Ranger Company No. 2 with the rank of major, he had about 30 Bowie knives made for his men according to his personal design by a blacksmith in Shortland St. Auckland. The Forest Rangers were an elite corps of mounted scouts employed by the colonial government between August 1863 and October 1867 during the New Zealand Wars.

At the time, knives were made of wagon spring steel, one of the few steels available to blacksmiths in Auckland in 1863, and Von Tempsky, an experienced fighter, taught his men the use of the Bowie knife in hand-to-hand combat. The knife was used to defend against enemy blows while a pistol was usually held in the other hand.

In addition to combat, Bowie knives were used to open paths in the forest, dig defensive positions, cut firewood, and for general use while camping.

Use: Heavy Duty / Collection

Type of production: Handcrafted
Country of manufacture: New Zealand
Blade: full tang made of 8670 spring steel, high carbon content
Blade Finish: Direct heat treatment, which goes to create special color play on the blade
Handle: Wenge wood with carbon steel through-guard
Blade length: 165mm.
Blade thickness: 6mm.
Total length: 283mm.
Balance: advanced
Weight: 600g.
Sheath: leather
Packaging: unwrapped, sold certificate of warranty and authenticity
Notes: previously purchased knife, never used, from a private collection

PREVIOUSLY PURCHASED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: knife previously purchased, withdrawn from a private collection
* Condition: Like new, never used, never taken out of the box and never placed in the sheath.
* Commercially available: Hard to find with this particular briar handle
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present, new, never removed from plastic packaging still sealed.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.

The Bark River Bushcrafter II is designed to be the ultimate bushcraft knife. The name itself is no accident: careful research has led to an exceptional result that is appreciated by enthusiasts in the field. The blade has an ideal shape for bushcraft activities, while the handle offers excellent ergonomics. Compared to the standard model, the Bushcrafter II is slightly larger, with a blade over an inch longer.

Made of CPM 3V steel, the blade is extremely durable and retains its sharpness for a long time. However, it is not completely stainless, so it should be cleaned after use and occasionally oiled to prevent corrosion. The edge has a convex bevel, which is easy to maintain by sanding.

The handle is made of fine desert ironwood burl, a hardwood from the U.S. and Mexico, featuring an elegant grain that gives the knife a luxurious look. The leather sheath allows for both vertical (belts up to 2 inches) and diagonal carry.

Each Bark River knife is handcrafted and one-of-a-kind.

Intended Use: Hiking / Utility / Bushcraft

Country of manufacture: USA
Blade: full tang made of CPM-3V carbon steel at 61HRC
Handle: desert ironwood burlwood
Blade length: 113mm.
Blade thickness: 4.1mm.
Total length: 233mm.
Weight: 205g.
Sheath: leather, belt
Notes: knife from a private collection, like new, never taken out of its box and never placed in the sheath

The Kanekoma is a traditional Japanese knife, used for centuries by peasants for various farm work. Born of Japan's fine forging tradition, it combines simplicity and effectiveness, striking the perfect balance between form and function.

Its three-layered San Mai steel blade offers an exceptionally sharp edge: the hard core ensures cutting, while the softer outer layers impart strength and flexibility. This makes it a practical and durable tool, ideal for everyday work, from farming to woodworking.

More than a showpiece, the Kanekoma is a genuine example of craftsmanship, still prized today for its incredible quality.

Country of Manufacture: Japan
Blade: San Mai Carbon Steel - Yasuki Steel Blue Paper Clas Steel 62HRC
Handle: Bent metal foil
Closure: Free of blade lock
Length closed: 120mm.
Blade Length: 100mm.
Blade thickness: 3mm
Length opened: 212mm
Weight: 66g.
Notes: Engravings with Japanese ideograms on the right side of the handle - high carbon steel blade, clean, dry and lubricate well to prevent rust and oxidation from occurring

The Arbiter concept was originally sketched out by Adam Marfione in 2012. Microtech is excited to bring this piece into production as Adam begins to become an integral part of the team. Previously available only as a custom knife, the Arbiter features a 9" bowie-style clip point blade with an elegant curved primary cutting edge that flows into a raised tip with devastating penetrating power. The G10 grips feature a crisscross pattern and grooves along the edge of the handle that provide an impressive grip, creating a perfect harmony between user and tool. The Arbiter comes with a custom Blade-Tech carry system attached to the molded composite scabbard.

Intended Use: Tactical

Type of manufacture: Midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Apocalyptic
Handle: G10
Blade length: 229mm.
Blade thickness: 4mm.
Total length: 362mm.
Weight: 504g.
Sheath: made of Kydex Carbon Fiber, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Never used, absolutely like new
* Commercially available: Still in production, hard to find
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Marketed by manufacturer without a box
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

This replica of Major Von Tempsky's 11” Bowie knife is inspired by the design of the knife he created and assigned to his company of Forest Rangers in 1863.

Gustavus Ferdinand von Tempsky (1828-1868) was a German-born adventurer, soldier and artist, known for his role in the New Zealand Wars and for his leadership among the Forest Rangers. His adventurous life and courage made him a legendary figure, particularly in the context of battles between European settlers and Māori peoples.

He learned the advantages of Bowie knife fighting in California during his stint as a prospector, where he had acquired an excellent American-made knife; once he arrived in New Zealand and found himself in charge of Forest Ranger Company No. 2 with the rank of major, he had about 30 Bowie knives made for his men according to his personal design by a blacksmith in Shortland St. Auckland. The Forest Rangers were an elite corps of mounted scouts employed by the colonial government between August 1863 and October 1867 during the New Zealand Wars.

At the time, knives were made of wagon spring steel, one of the few steels available to blacksmiths in Auckland in 1863, and Von Tempsky, an experienced fighter, taught his men the use of the Bowie knife in hand-to-hand combat. The knife was used to defend against enemy blows while a pistol was usually held in the other hand.

In addition to combat, Bowie knives were used to open paths in the forest, dig defensive positions, cut firewood, and for general use while camping.

Use: Heavy Duty / Collection

Type of production: Handcrafted
Country of manufacture: New Zealand
Blade: full tang made of 8670 spring steel, high carbon content
Blade Finish: Direct heat treatment, which goes to create special color play on the blade
Handle: Wenge wood with S-shaped carbon steel through-guard
Blade length: 280mm.
Blade thickness: 7mm.
Total length: 425mm.
Balance: advanced
Weight: 925g.
Sheath: leather
Packaging: unwrapped, sold certificate of warranty and authenticity
Notes: previously purchased knife, never used, from a private collection

KNIFE RETRIEVED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private owner, previously purchased
* Condition: Like new, never taken out of its box
* Market Availability: Hard to find
* Factory Edge: Yes
* Blade Marks: None
* Handle Marks: None
* Box: Original, with logos and accessories
* Sheath: Included
* Manuals, Certificates & Warranty: Complete set included
* Inspected and Certified by our internal laboratory

The Halfbreed Blades HBBLBK01OD is a high-end tactical knife designed to withstand the most extreme conditions. Built with a solid full-tang blade made of Böhler K110 steel, it provides excellent wear resistance and outstanding cutting performance. The 146 mm blade is coated with OD Green Teflon (PTFE), reducing friction and protecting the steel from corrosion.

The handle, made of black G10, ensures a secure grip in any situation, while the crusher pommel with an integrated fire starter adds extra functionality for survival scenarios. The design also features a lanyard hole and a bow drill system on both sides of the handle, making it ideal for survival use.

Supplied with a Kydex MOLLE-compatible sheath, the Halfbreed Blades HBBLBK01OD is perfect for tactical operators, military personnel, and outdoor enthusiasts looking for an indestructible and high-performance knife. Made in Australia, this tool embodies reliability and uncompromising toughness.

Technical Specifications
Intended Use: Tactical, Survival, Military
Production Type: Industrial
Country of Manufacture: Australia
Blade: Böhler K110 Steel
Blade Finish: PTFE (OD Green Teflon)
Handle: Black G10
Blade Length: 146 mm
Blade Thickness: 6.5 mm
Total Length: 286 mm
Weight: 541 g
Locking Mechanism: Full-Tang (Fixed Blade)
Clip: -
Packaging: Halfbreed Blades Box + Kydex MOLLE-compatible Sheath
Notes: Lanyard hole, Crusher pommel with fire starter, Bow drill on both sides of the handle

The USMC Fighter model is our modern and improved version of the classic multi-purpose knife made famous by the United States Marines.

This fixed blade is 6.5mm thick and made of CPM-S35VN sintered stainless steel with Black DLC treatment, measures nearly 30cm. in total length, has G-10 grips with a three-dimensional machined surface, a two-piece Titanium guard with DLC treatment, and a billet Titanium pommel with DLC treatment.

This unique full tang design has all the advantages of a classic slide-over construction without compromising strength, as would be expected from a Medford! With handcrafted brown leather sheath, it is a true 21st century combat knife.

Intended Use: Tactical/Collection

Type of manufacture: MidTech
Country of Manufacture: USA
Blade: Full tang, CPM-S35VN steel
Blade Finish: Black DLC
Handle: Titanium Guard and Pommel, and G10 three-dimensionally machined grips
Blade Length: 170mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balance: set back 1cm from the guard branch
Weight: 508g.
Sheath: leather, belt, for vertical carry, handcrafted
Packaging: nylon pouch, with zipper closure and Medford logos, certificates of warranty and authenticity, cardboard box
Notes: designed and built by Greg Medford

KNIFE FROM A PRIVATE COLLECTION

• Type: Knife previously purchased and withdrawn from a private collection
• Condition: Like new, never used
• Availability: Hard to find
• Sharpening: Factory edge
• Blade marks: None
• Handle marks: None
• Box: -
• Sheath: Perfect, never used, made of Kydex
• Manuals, Certificates, and Warranties: -

Checked and Certified by our internal laboratory

The Pohl Force Hornet XL Custom Edition 2009 is a high-quality tactical knife, the result of collaboration between Pohl Force and renowned American knifemaker Spencer A. Reiter. This limited edition of 500 numbered pieces offers a unique design and excellent performance, ideal for collectors and tactical knife enthusiasts.

• Intended Use: Collection, tactical use, and EDC (Everyday Carry)
• Production Type: Limited edition, industrial production with artisanal finishes
• Country of Origin: Germany
• Blade: D2 steel with Rockwell hardness of 60-61 HRC
• Blade Finish: Dual finish with polished bevels and cross-satin surface
• Handle: Micarta scales secured with Torx screws
• Blade Length: 85 mm
• Blade Thickness: 6 mm
• Overall Length: 185 mm
• Weight: 170 g
• Packaging: Collector's pouch with embroidered Pohl Force logo, hand-signed certificate of authenticity, exclusive velcro patch, Wilson Tactical lanyard in matching colors
• Notes: Includes a Kydex® sheath by Höppner & Schumann, compatible with Tek-Lok adapter for horizontal or vertical carry

KNIFE FROM A PRIVATE COLLECTION
* Type: Previously purchased knife withdrawn from a private collection
* Condition: Excellent, with very minor marks on the blade
* Availability: Available
* Edge: Factory edge
* Blade Marks: Minor marks on the blade
* Handle Marks: None
* Box: Original
* Sheath: Perfect, never used
* Manuals, Certificates, and Warranties: Original warranty document
Inspected and Certified by our internal lab

The Moros is an excellent choice for field use or tactical applications. This well-balanced blade is the perfect blend of size and performance. Light enough to carry without discomfort but sturdy enough to tackle various daily tasks. The tip profile is flat with a tapered upper edge, ensuring excellent cutting performance with good penetration strength. The full tang and handle of the Moros provide a neutral balance, making it light in hand. The ergonomic and textured Micarta canvas handle offers a comfortable and secure grip, both dry and wet.

After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had been designing knives for friends in the special forces, and Mark, who worked with military and tactical equipment in the "Green Berets," decided to combine their skills and passion to create innovative and functional knives using the highest quality materials, entirely made in the United States.

Intended Use: Tactical/Military

Production Type: Mid Tech
Country of Manufacture: USA
Blade: CPM-S45VN stainless steel 59/61 HRC
Blade Finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade Length: 134 mm
Blade Thickness: 4.8 mm
Overall Length: 254 mm
Balance: On guard
Weight: 203 g
Sheath: Kydex thermoformed
Packaging: Cardboard box with Spartan Blades logo
Note: Design by Curtis Iovito

PREVIOUSLY PURCHASED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new, never used, never removed from its packaging, and never inserted in the sheath
* Availability: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present
* Sheath: Present, with an additional new leather sheath
* Manuals, Certificates, and Warranties: Present
* Inspected and Certified by our internal laboratory

The Bark River Aurora II is designed as the ultimate bushcraft knife, a result of extensive testing conducted by experts in North America and Europe. This outdoor knife, perfected through feedback received, is notable for its balance and versatility. The blade, made of CPM 3V steel, is renowned for its exceptional strength and its ability to retain an excellent edge over time. However, it is important to watch for moisture and acids, as CPM 3V is not completely stainless. Cleaning the knife after use and occasionally applying oil is recommended to ensure its longevity.

The Aurora II, significantly larger than the standard model, features a pointed tip ideal for detailed tasks and a spine suited for use with a fire starter. These characteristics make it an indispensable tool for outdoor activities.

The handle is made of desert ironwood, a hardwood appreciated for its color and unique pattern, giving the knife a luxurious look and improving grip. Each piece is handmade by Bark River, meaning that every knife is unique and may have slight variations compared to the images.

Intended Use: Hiking / Utility / Bushcraft

Country of Manufacture: USA
Blade: Full tang in CPM-3V carbon steel at 61 HRC
Handle: Desert ironwood
Blade Length: 140mm.
Blade Thickness: 3.85mm.
Total Length: 264mm.
Weight: 195g.
Sheath: Leather, with an additional leather sheath
Notes: Knife from a private collection, like new, never removed from its packaging and never inserted in the sheath, provided with an additional sheath, out of production and no longer available on the market

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Overall in good condition
* Commercially available: Still in catalog.
* Sharpening: Factory.
* Marks on blade: Marks and abrasions.
* Marks on handle: Small signs of wear and tear.
* Box: Present, not complete (absence of warranties and plastic bags).
* Scabbard: Present, in good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Military/Collection

Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 58HRC
Blade Treatment: Burnishing MIL-C-13924
Handle: Polymer
Blade Length: 167mm.
Blade thickness: 6.3mm.
Total length: 270mm.
Weight: 224g.
Sheath: Nylon thigh piece
Packaging: cardboard box with Extrema Ratio logos
Notes: Limited edition in 2018 pieces - Edition to celebrate 100 years of the Italian Ardites

The Model 26 Pathfinder is an excellent lightweight skinning and outdoor knife. The blade design favours both cutting and pointing work. This knife has become one of the most popular small hunting knives.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Good overall condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: Slight on the guard, the deer part is parts as new
* Packaging: -
* Scabbard: Original, leather, in good condition, some marks on the front
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: utility

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Deerskin
Blade length: 100mm.
Blade thickness: 4mm.
Total length: 215mm.
Balance: set back about 2cm from the guard
Weight: 124g. (206g. scabbard included)
Sheath: brown leather with belt loop
Notes: -

The Model 16 was designed to meet the demand for an almost indestructible multi-purpose knife, including intensive use in salt water (careful cleaning and maintenance is however recommended). A special wax-impregnated sheath is included.

7″ (17.8cm) stainless steel blade with 6.5mm thickness. The top of the blade is slightly serrated to allow easy thumb placement. Black Micarta handle. Extra-heavy 7/8″ (2.2cm) wide tang that extends through a channel in the handle, securely fixed with epoxy. 

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased, manufactured in 2023
* Condition: Very good condition, like new
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in very good condition
* Manuals, Certificates and Warranties: - - * Checked and Certified by our in-house laboratory.
* Checked and certified by our in-house laboratory

Intended use: utility

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Micarta
Blade length: 178mm.
Blade thickness: 6.5mm.
Total length: 297mm.
Balance: on the guard
Weight: 362g. (522g. including scabbard)
Sheath: Brown leather with belt loop
Notes: -

Microtech Socom knives are named after the U.S. Special Operations Command, abbreviated as Socom; an operational command under the U.S. Department of Defense Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does! Thanks to high-quality materials that can withstand all the rigors of the battlefield. Knives built to last.

The Microtech Signature Series line is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of premium materials and finishes: such as carbon fiber, copper, Damascus, and DLC.

Intended Use: Tactical/Sporting

Type of production: Midtech
Country of Production: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Black DLC
Handle: Carbon Fiber
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 186g. (297g. including scabbard)
Sheath: made of Kydex Carbon Fiber, with Tek-Lok type attachment
Packaging: cardboard box with Microtech USA logos
Notes: -

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Conditions: in like-new condition
* Available on the market: No longer available
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: hand-made leather in good condition
* Manuals, Certificates and Guarantees: No
* Checked and Certified by our internal laboratory

Intended use: collection/sports

Type of production: Handcrafted
Blade production: Cambodia
Blade: mirror-finish DNH7 carbon steel
Blade treatment: brut de forge
Handle: wood and horn
Blade length: approx. 120mm.
Blade thickness: approx. 5.5mm.
Total length: approx. 250mm.
Balance: -
Weight: approx. 228g.
Lock: 1.5cm set back
Sheath: Handcrafted leather
Notes: -

Citadel Knives and Swords is a sword and knife manufacturer based in Phnom Penh, Cambodia. Despite the country's reputation as an exotic and remote location, the company is easily accessible, located close to the city's international airport. The workshop is modest but houses an impressive range of high-quality Japanese swords and knives.

Founded by Dominique Eluere in the 1990s, Citadel has combined the expertise of French and local craftsmen to produce blades that rival the best in the world. Eluere began by training Cambodian blacksmiths to make French table knives, later evolving into the production of Japanese swords.

The quality of Citadel swords is world renowned, thanks to the use of traditional Japanese techniques and a meticulous manufacturing process. Each katana is heat treated, creating a blade with varying hardness along the edge and spine, a hallmark of true katanas. The hilt is fully encased in high-quality stingray leather, a rarity compared to common panels.

Attention to detail extends to every element, with every component custom-made for each blade. This includes the tsuba (sword guard) and habaki (blade collar), both of which are hand-crafted and fitted, ensuring perfect fit and functionality.

In addition to katanas, Citadel also produces European swords and knives, maintaining the same philosophy of quality and functionality. Production is artisanal, with particular attention to polishing and finishing, often done by hand with sandpaper and whetstones.

Citadel is proud of its Cambodian roots, with local workers looking up to Eluere as a father figure and deeply involved in maintaining the company's high standards.

In short, Citadel Knives and Swords represents a perfect fusion of tradition, craftsmanship and innovation, offering products that are truly functional works of art. These tools, while expensive, represent an investment in quality and craftsmanship that is hard to match.

The Arbiter concept was originally sketched out by Adam Marfione in 2012. Microtech is excited to bring this piece into production as Adam begins to become an integral part of the team. Previously available only as a custom knife, the Arbiter features a 9" bowie-style clip point blade with an elegant curved primary cutting edge that flows into a raised tip with devastating penetrating power. The G10 grips feature a crisscross pattern and grooves along the edge of the handle that provide an impressive grip, creating a perfect harmony between user and tool. The Arbiter comes with a custom Blade-Tech carry system attached to the molded composite scabbard.

Intended Use: Tactical

Type of manufacture: Midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Apocalyptic
Handle: G10
Blade length: 229mm.
Blade thickness: 4mm.
Total length: 362mm.
Weight: 504g.
Sheath: made of Kydex Carbon Fiber, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

Microtech Socom knives are named after the United States Special Operations Command, abbreviated to Socom; an operational command under the United States Department of Defence Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does just that! Thanks to high-quality materials that can withstand the rigours of the battlefield. Knives built to last.

The Microtech Signature Series is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of first-class materials and finishes: e.g. carbon fibre, copper, Damascus and DLC.

Intended use: Tactical / Sporting

Production type: Midtech
Country of manufacture: USA
Blade: Stainless steel M390 60-61HRC
Blade Finish: Dark Dual Tone, Black Dark Washed and Black DLC
Handle: Carbon Fibre with DLC treated screws
Blade length: 137mm.
Blade thickness: 4mm.
Total length: 265mm.
Weight: 212g. (273g. including scabbard)
Sheath: Carbon fibre Kydex, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

Microtech Socom knives are named after the US Special Operations Command, abbreviated to Socom; an operational command under the US Department of Defence Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does just that! Thanks to high-quality materials that can withstand the rigours of the battlefield. Knives built to last.

The Microtech Signature Series is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of first-class materials and finishes: e.g. carbon fibre, copper, Damascus and DLC.

Intended use: Tactical / Sporting

Production type: Midtech
Country of manufacture: USA
Blade: Stainless steel M390 60-61HRC
Blade Finish: Dark Dual Tone, Black Dark Washed and Black DLC
Handle: G10 Urban Camo
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 186g. (297g. including scabbard)
Sheath: Kydex Carbon Fibre, with Tek-Lok type attachment
Packaging: cardboard box with Microtech USA logos
Notes: -

Microtech Socom knives are named after the US Special Operations Command, abbreviated to Socom; an operational command under the US Department of Defence Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does just that! Thanks to high-quality materials that can withstand the rigours of the battlefield. Knives built to last.

The Microtech Signature Series is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of first-class materials and finishes: e.g. carbon fibre, copper, Damascus and DLC.

Intended use: Tactical / Sporting

Production type: Midtech
Country of manufacture: USA
Blade: Stainless steel M390 60-61HRC
Blade Finish: Dark Dual Tone, Black Dark Washed and Black DLC
Handle: Carbon Fibre
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 177g. (225g. scabbard included)
Sheath: Kydex Carbon Fibre, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.

The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.

Intended use: allrounder utility 

Blade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpener

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratory

Intended use: Regional

Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife from the 1990s, previously purchased.
* Condition: In very good condition
* Commercially available: discontinued
* Sharpening: Factory sharpened
* Marks on blade: Small marks given by time.
* Marks on handle: None
* Box: -
* Scabbard: Present, but presumably not original although fully compatible.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8A
Blade Finish: Satin finish
Handle: Kraton
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 263mm.
Balance: advanced
Weight: 225g.
Scabbard: brown leather, belt-mounted, presumably not original but fully compatible
Packaging: -
Notes: previously purchased knife, from private collection

The Freedom Knife by Wander Tactical, an exclusive custom edition created for Coltelleria Collini, dedicated to enthusiasts of the outdoor and collectible sector. This knife stands out for its tactical, compact and at the same time extremely robust design.

Type of production: Artisan
Blade production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: Medieval
Handle: Micarta
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 245mm.
Balancing: rearward
Weight: 327g.
Sheath: in Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Intended Use: Excursionism / Heavy Duty

Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC
Blade Finish: Raw Finish
Handle: Micarta
Blade Length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balance: backward
Weight: 729g.
Sheath: made of Kydex, thermoformed, with MOLLE-compatible belt oaxant
Packaging: warranty certificate
Notes: Each knife is unique and handcrafted in every part