Knife - Essential Tool for Camping, Outdoor Adventure and collection

KNIFE ACQUIRED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Mechanically in excellent condition; cosmetically in good condition. Shows minor scuffs on the G10 handle due to the passage of time and limited use of the knife.
* Availability on the market: Knife from 2000, discontinued, particularly rare
* Sharpening: Professionally resharpened by the previous owner
* Marks on blade: Minor cosmetic abrasions caused by age and use of the knife, albeit limited
* Marks on handle: A few minor marks caused by age and use of the knife, albeit limited
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

Intended use: Tactical/Military

Manufacturing type: Industrial
Blade: 154CM stainless steel
Blade finish: Titanium nitriding
Country of manufacture: USA
Handle: G-10 with titanium inlays
Blade length: 90 mm.
Blade thickness: 3 mm.
Closed length: 125 mm.
Overall length: 213 mm.
Weight: 128 g.
Closure: Liner Lock
Clip: burnished stainless steel, removable
Notes: Knife from 2000, discontinued, previously purchased, from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Like new, never used, but missing the original packaging
* Commercially available: Discontinued
* Edge: Factory-sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Missing - Will be shipped in a Spartan Blades box, but different from the original one
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.

Curtis, who had been designing and crafting knives for his friends in the special forces for years, and Mark, who had always dealt with military and tactical gear during his time with the “Green Berets,” decided to combine their expertise and passion with the goal of building innovative and functional knives using the highest-quality materials and manufactured entirely in the United States.

Intended Use: EDC / Sports

Production Type: Midtech
Country of Manufacture: USA
Blade: CPM-S35VN stainless steel
Blade Finish: Stonewash
Handle: Stonewashed Titanium
Blade Length: 48 mm.
Blade thickness: 2 mm.
Closed length: 74 mm
Overall length: 121 mm.
Closed thickness: 7 mm
Weight: 36 g.
Closure: Integral Frame Slipjoint (two-handed opening and closing without blade lock)
Clip: Titanium
Packaging: Cardboard box with Spartan Blades logos
Notes: Winner of the 2014 Blade Show award for “Most Innovative American-Made Knife of the Year” – Knife previously purchased and withdrawn from a private collection

The Benchmade 275-05 Adamas takes one of the most rugged models in the Benchmade catalog to an even higher level, combining extreme performance with premium materials.

The drop-point blade made of CPM-MagnaCut steel offers an excellent balance between edge retention, corrosion resistance, and toughness, while the marbled carbon fiber handle ensures lightness, sturdiness, and a particularly refined aesthetic.

The internal construction utilizes steel liners with an FDE PVD coating, maintaining the legendary ruggedness of the Adamas family. A refined yet uncompromising version, designed for those who want an extremely durable knife with premium finishes and materials.

Intended Use: Utility / Hiking

Manufacturing Type: Industrial
Country of Manufacture: USA
Blade: CPM-MagnaCut tool steel, 63/65 HRC
Blade finish: Satin
Handle: Marble Carbon Fiber with FDE stainless steel scales
Blade length: 97 mm.
Blade thickness: 3.6 mm.
Closed length: 132 mm.
Overall length: 227 mm.
Handle thickness: 16 mm.
Weight: 176 g.
Lock: AxisLock
Clip: Deep Pocket, removable and reversible, made of stainless steel with an FDE finish
Packaging: Cardboard box with Benchmade logos, nylon sheath with M.O.L.L.E.-compatible belt loops
Notes: Premium version of the Adamas model

KNIFE ACQUIRED FROM A PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like New
* Commercial Availability: No - Discontinued
* Sharpening: Original Factory Edge
* Marks on Blade: None
* Marks on Handle: None
* Box: Original, in like-new condition
* Manuals, Certificates and Warranty Documents: Benchmade certificates
* Inspected and Certified by our in-house laboratory

The Benchmade Foray 698-181 Gold Class is one of the most prestigious interpretations of the compact Foray, produced by Benchmade as a Limited Edition from the Gold Class series, the line dedicated to the most exclusive models in the American manufacturer's production.

Gold Class represents the pinnacle of the Benchmade philosophy: selected models are reinterpreted using premium materials, special machining and superior finishes, transforming a production knife into an object primarily intended for collecting.

The 698-181 combines a spectacular stainless Damasteel blade with Loki pattern with a handle made of marbled carbon fiber with mother-of-pearl inlays, creating a striking contrast between technical materials and natural details that makes each example visually distinctive.

One of the most sought-after versions of the Benchmade Foray

The Foray was conceived as a compact and elegant folder, characterized by balanced proportions and Benchmade's renowned AXIS Lock mechanism.

In the 698-181 Gold Class version, the technical foundation of the model is elevated through significantly more refined materials: Damasteel, marbled carbon fiber, mother of pearl, dark-finished components and anodized details.

The result is a knife that retains dimensions perfectly suited to EDC use, but whose materials, rarity and positioning place it primarily in the world of Benchmade collecting.

Loki Damasteel Blade

The blade measures approximately 82 mm and is made from stainless Damasteel with Loki pattern, with a declared hardness of approximately 58-60 HRC.

Damasteel is produced through the processing of different stainless steels using advanced metallurgical techniques that create the characteristic layered pattern visible across the blade surface.

The Loki pattern used on this version creates a particularly pronounced design and makes every blade slightly different from an aesthetic point of view.

The drop-point profile also preserves the functional character of the original Foray, offering a versatile and well-balanced geometry.

Marbled Carbon Fiber and Mother of Pearl

The handle uses marbled carbon fiber, a lightweight and structurally strong material characterized by an irregular, three-dimensional texture.

The handle scales incorporate mother-of-pearl inlays, producing different reflections and shades depending on the lighting and viewing angle. Historical specifications for this model identify these inlays as Black Lip Mother of Pearl.

It is precisely this combination of technical carbon fiber and natural material that gives the 698-181 a personality clearly distinct from standard Foray versions.

Gold Class Details

The 698-181 version also features a number of details specific to the Gold Class configuration:

• Loki Pattern Damasteel blade
• Marbled Carbon Fiber handle
• Black Lip Mother of Pearl inlays
• Steel liners with DLC coating
• DLC-coated hardware
• Anodized thumb stud
• Anodized barrel spacers
• Reversible tip-up deep-carry clip with DLC coating
• AXIS Lock locking system

These features belong to the 2018 Gold Class configuration of the model, now discontinued and particularly appealing to Benchmade collectors.

Technical Specifications

Manufacturer: Benchmade
Model: Foray 698-181
Series: Gold Class Limited Edition
Year: 2018
Production Status: Discontinued
Production: Industrial
Country of Manufacture: USA
Type: Folding knife
Opening: Manual via thumb stud
Lock: AXIS Lock
Blade Profile: Drop Point
Steel: Stainless Damasteel
Pattern: Loki
Hardness: approximately 58-60 HRC
Blade Length: approximately 82 mm
Blade Thickness: approximately 3.5 mm
Closed Length: approximately 105 mm
Overall Length: approximately 186 mm
Handle Thickness: approximately 14 mm
Weight: approximately 98 g
Handle: marbled carbon fiber with Black Lip Mother of Pearl inlays
Liners: steel with DLC coating
Clip: reversible deep-carry, tip-up, DLC-coated steel
Pouch: Benchmade Gold Class fabric pouch

The FOX Gabi EDC FX-451 DMB represents one of the most refined and distinctive interpretations of the Gabi family: a compact and lightweight folding knife designed for Everyday Carry, characterized by the combination of a black Dark Matter handle, stonewashed PVD blade and blue-anodized details.

The Gabi project was developed as an evolution of the renowned FOX Predator, a model originally designed with a strong tactical and operational character. FOX preserves its DNA of strength, reliability and practicality, while reinterpreting it in a slimmer, more compact and discreet platform specifically designed for everyday carry and use.

At the heart of the FX-451 DMB is a Niolox blade, hardened to 59-61 HRC. Its reduced thickness of just 2.5 mm provides a particularly effective balance between cutting performance, structural strength and light weight, keeping the knife agile and pleasant to use on a daily basis.

In this configuration, the blade features a refined black stonewashed PVD treatment. The combination of the PVD coating and stonewashed finish gives the surface a technical and sophisticated appearance, perfectly in keeping with the premium character of this version.

Opening is facilitated by the practical thumb stud, while the Crossbar Lock system allows smooth and intuitive blade operation. The mechanism can be operated without placing the fingers directly in the blade's closing path, making it particularly functional for everyday use.

The most distinctive visual feature of the FX-451 DMB is its black Dark Matter handle, which gives the knife a modern and exclusive personality. The distinctive texture of the material creates depth and visual variations that make the handle particularly attractive, while maintaining low weight and compact dimensions.

FOX creates an elegant color contrast through blue-anodized aluminium components: both the Crossbar Lock control and the standoffs feature this finish, introducing discreet color accents against the black handle and blade.

The hardware follows the same premium approach. The reversible clip is made from AISI 420 stainless steel with black PVD treatment, while the screws are made from AISI 303 with black PVD. The reversible clip further increases versatility for everyday carry.

With a 78 mm blade, a thickness of just 2.5 mm, an overall length of 188 mm and a weight of only 65 g, the Gabi FX-451 DMB combines refined materials, technical construction and remarkable lightness in a format perfectly suited to the EDC philosophy.

Entirely Made in Italy, the FOX Gabi FX-451 DMB is intended for those looking for a modern and technically capable folding knife while also seeking materials and finishes that stand out from more traditional EDC configurations. A particularly successful version for enthusiasts seeking a balance between functionality, lightness and visual exclusivity.

Intended use: Everyday Carry / Utility
Production type: Industrial
Brand: FOX Knives
Model: Gabi EDC FX-451 DMB
Country of manufacture: Italy
Opening/locking system: Crossbar Lock
Opening: Thumb Stud
Blade: Niolox
Hardness: 59-61 HRC
Blade finish: Black Stonewashed PVD
Blade length: 78 mm / 3.07"
Blade thickness: 2.5 mm / 0.10"
Overall length: 188 mm / 7.40"
Handle: Black Dark Matter
Crossbar Lock: Blue-anodized aluminium
Standoffs: Blue-anodized aluminium
Clip: Reversible, AISI 420 black PVD
Screws: AISI 303 black PVD
Weight: 65 g / 2.29 oz
Notes: Premium version of the Gabi family with black Dark Matter handle and blue-anodized details

The FOX Gabi EDC FX-451 FG combines the compact and functional design of the Gabi family with a distinctly outdoor-oriented configuration: an OD green G10 handle, black blade and orange-anodized details create an immediately recognizable aesthetic contrast.

The Gabi project was developed as an evolution of the renowned FOX Predator, originally conceived as a robust tactical knife for operational use. FOX preserves its reliability and strength while reinterpreting them in a slimmer, more compact and discreet platform developed specifically for Everyday Carry.

The blade is made from Niolox, hardened to 59-61 HRC, with a reduced thickness of just 2.5 mm. This geometry maintains good structural strength while providing an efficient cutting profile perfectly consistent with the EDC philosophy of the model.

In this version, the blade features the Black Top Shield® surface treatment, which strongly characterizes the appearance of the knife and creates a striking contrast with the OD green handle and orange details.

Opening is handled by the practical thumb stud, while the Crossbar Lock system allows quick and intuitive blade operation. The mechanism can be released without placing the fingers directly in the blade's closing path, making it particularly practical for everyday use.

The OD green G10 handle offers light weight, stability and resistance to regular use. The machined surface also improves grip control without being excessively aggressive during pocket carry.

One of the most distinctive aesthetic features of the FX-451 FG is the use of orange-anodized aluminium details: both the Crossbar Lock control and the standoffs use this finish, creating a particularly effective contrast with the green G10 and black blade.

The equipment is completed by a reversible clip made of AISI 420 stainless steel with Black Idroglider treatment and screws in AISI 303 Black Idroglider, maintaining the technical and dark appearance of the metallic components.

With a 78 mm blade, a thickness of just 2.5 mm and an overall length of 188 mm, the Gabi FX-451 FG offers particularly balanced dimensions for a knife intended for everyday carry.

Entirely Made in Italy, the FOX Gabi FX-451 FG is a particularly successful configuration for those looking for a modern and robust EDC knife with technical materials and a strong visual identity, without sacrificing the manufacturing quality of Maniago production.

Intended use: Everyday Carry / Utility
Production type: Industrial
Brand: FOX Knives
Model: Gabi EDC FX-451 FG
Country of manufacture: Italy
Opening/locking system: Crossbar Lock
Opening: Thumb Stud
Blade: Niolox
Hardness: 59-61 HRC
Blade finish: Black Top Shield®
Blade length: 78 mm / 3.07"
Blade thickness: 2.5 mm / 0.10"
Overall length: 188 mm / 7.40"
Handle: OD green G10
Crossbar Lock: Orange-anodized aluminium
Standoffs: Orange-anodized aluminium
Clip: Reversible, AISI 420 Black Idroglider
Screws: AISI 303 Black Idroglider
Notes: Gabi EDC version with OD green G10 and orange-anodized details

The FOX Gabi EDC FX-451 is the most essential and operational version of the Gabi family: a compact, robust and practical folding knife designed for Everyday Carry, featuring a black G10 handle and a blade with Black Top Shield® finish.

The Gabi project was developed as an evolution of the renowned FOX Predator, a model originally created with a strong tactical and professional orientation. FOX preserves its DNA of strength, reliability and ease of use, while reinterpreting it in a slimmer, more compact and discreet platform specifically designed for everyday use.

The blade is made from Niolox, a modern steel appreciated for its effective balance of cutting performance, edge retention, toughness and corrosion resistance. FOX specifies a hardness of 59-61 HRC, while the reduced thickness of just 2.5 mm makes the blade particularly efficient in cutting without adding unnecessary weight.

In this configuration, the blade features the Black Top Shield® coating, giving the knife a more technical and discreet appearance while providing additional protection to the blade surface during everyday use.

Opening is facilitated by the thumb stud, while the Crossbar Lock system allows smooth and intuitive blade operation. The mechanism allows the lock to be operated without placing the fingers directly in the blade's closing path, making it particularly practical for everyday use.

The black G10 handle represents the most function-oriented choice within the Gabi range. G10 is a lightweight, stable and durable composite material, particularly well suited to an EDC knife intended for regular use. The handle geometry maintains compact dimensions while providing a secure and comfortable grip.

FOX completes this version with matching black components: Crossbar Lock and standoffs in black-anodized aluminium, a reversible clip in AISI 420 with Black Idroglider treatment and screws in AISI 303 with Black Idroglider treatment. The result is a uniform, technical and intentionally understated configuration.

The reversible clip allows the carry configuration to be adapted to the user's preference, increasing the knife's versatility as an everyday tool.

With a 78 mm blade, a thickness of 2.5 mm and an overall length of just 188 mm, the Gabi FX-451 combines compact dimensions with characteristics normally associated with more operationally oriented knives.

Entirely Made in Italy, the FOX Gabi FX-451 is a particularly interesting choice for those looking for a modern, reliable and robust EDC knife featuring technical materials and a functional design, while retaining the manufacturing quality of Maniago production.

Intended use: Everyday Carry / Utility
Production type: Industrial
Brand: FOX Knives
Model: Gabi EDC FX-451
Country of manufacture: Italy
Opening/locking system: Crossbar Lock
Opening: Thumb Stud
Blade: Niolox
Hardness: 59-61 HRC
Blade finish: Black Top Shield®
Blade length: 78 mm / 3.07"
Blade thickness: 2.5 mm / 0.10"
Overall length: 188 mm / 7.40"
Handle: Black G10
Crossbar Lock: Black-anodized aluminium
Standoffs: Black-anodized aluminium
Clip: Reversible, AISI 420 Black Idroglider
Screws: AISI 303 Black Idroglider
Notes: Compact and robust EDC knife, evolution of the FOX Predator

The FOX Gabi EDC FX-451 TI represents the most elegant and refined interpretation of the new Gabi family: a compact folding knife designed for Everyday Carry, characterized in this version by a sophisticated sandblasted titanium handle.

The Gabi project was developed as an evolution of the well-known FOX Predator, a model originally designed with a strong tactical and operational character. FOX preserves its DNA of strength and reliability, while reinterpreting it in a slimmer, more compact and discreet platform, particularly suitable for everyday carry and daily use.

At the heart of the FX-451 TI is a Niolox blade, hardened to 59-61 HRC. With a thickness of only 2.5 mm, the blade achieves an especially effective balance between cutting performance, structural strength and light weight. The satin finish further enhances the clean lines of the knife and pairs perfectly with the titanium handle.

Opening is assisted by the thumb stud, while the Crossbar Lock system allows smooth and intuitive blade operation. This locking system also allows the mechanism to be operated without placing the fingers in the blade's closing path, making everyday use particularly natural and comfortable.

The distinctive feature of this version is the sandblasted titanium handle, a material that combines light weight, strength and a premium feel. FOX complements the titanium with bronze-anodized aluminium details for the Crossbar Lock and standoffs, creating an elegant yet intentionally understated contrast.

The hardware is equally refined: the reversible clip is made of polished AISI 420 stainless steel, while the screws are made of polished AISI 303. The reversible clip increases versatility for everyday carry.

With a 78 mm blade, an overall length of just 188 mm and a weight of only 80 g, the Gabi TI combines premium materials and an all-metal construction while maintaining dimensions and weight perfectly suited to the EDC philosophy.

Entirely Made in Italy, the FOX Gabi FX-451 TI is designed for those looking for a modern and technically capable folding knife without giving up Italian manufacturing quality and the appeal of titanium. A particularly well-balanced configuration both for everyday use and for enthusiasts seeking the most refined version of the Gabi family.

Intended use: Everyday Carry / Utility
Production type: Industrial
Brand: FOX Knives
Model: Gabi EDC FX-451 TI
Country of manufacture: Italy
Opening/locking system: Crossbar Lock
Blade: Niolox
Hardness: 59-61 HRC
Blade finish: Satin
Blade length: 78 mm / 3.07"
Blade thickness: 2.5 mm / 0.10"
Overall length: 188 mm / 7.40"
Handle: Sandblasted titanium
Crossbar Lock: Bronze-anodized aluminium
Standoffs: Bronze-anodized aluminium
Clip: Reversible, polished AISI 420
Screws: Polished AISI 303
Weight: 80 g / 2.82 oz

PUFFY is an EDC (Every Day Carry) folding knife designed to offer practicality, reliability, and excellent value for the price. Designed to accompany the user in daily activities, it combines a modern and functional design with smooth, user-friendly mechanics.

The one-handed opening via a hole in the blade allows for quick and intuitive use, while the ball-bearing rotation system ensures a smooth and precise slide. Compact, lightweight, and easy to carry, it is the ideal companion for everyday needs, from urban use to outdoor activities.

Designed in Italy, the PUFFY is a smart solution for those who want a versatile, well-crafted, and affordable knife without compromising on build quality and functionality.

Intended Use: EDC / Sports

Production Type: Industrial
Country of Manufacture: China
Blade: 10Cr15CoMoV stainless steel (Asian alloy similar to Japanese VG-10)
Blade Finish: Stonewashed Black Idroglider
Handle: G10
Blade Length: 70 mm
Blade thickness: 3 mm
Closed length: 103 mm
Overall length: 160 mm
Weight: 105 g
Lock type: Liner Lock
Clip: Removable and reversible, made of stainless steel with black PTFE coating
Packaging: Cardboard box with manufacturer’s logos
Notes: Opening mechanism features ball bearings.

PUFFY is an EDC (Every Day Carry) folding knife designed to offer practicality, reliability, and excellent value for the price. Designed to accompany the user in daily activities, it combines a modern and functional design with smooth, user-friendly mechanics.

The one-handed opening via a hole in the blade allows for quick and intuitive use, while the ball-bearing rotation system ensures a smooth and precise slide. Compact, lightweight, and easy to carry, it is the ideal companion for everyday needs, from urban use to outdoor activities.

Designed in Italy, the PUFFY is a smart solution for those who want a versatile, well-crafted, and affordable knife without compromising on build quality and functionality.

Intended Use: EDC / Sports

Production Type: Industrial
Country of Manufacture: China
Blade: 10Cr15CoMoV stainless steel (Asian alloy similar to Japanese VG-10)
Blade Finish: Stonewashed
Handle: G10
Blade Length: 70 mm
Blade thickness: 3 mm
Closed length: 103 mm
Overall length: 160 mm
Weight: 105 g
Lock type: Liner Lock
Clip: Removable and reversible, made of stainless steel with black PTFE coating
Packaging: Cardboard box with manufacturer’s logos
Notes: Opening mechanism features ball bearings.

PUFFY is an EDC (Every Day Carry) folding knife designed to offer practicality, reliability, and excellent value for the price. Designed to accompany the user in daily activities, it combines a modern and functional design with smooth, user-friendly mechanics.

The one-handed opening via a hole in the blade allows for quick and intuitive use, while the ball-bearing rotation system ensures a smooth and precise slide. Compact, lightweight, and easy to carry, it is the ideal companion for everyday needs, from urban use to outdoor activities.

Designed in Italy, the PUFFY is a smart solution for those who want a versatile, well-crafted, and affordable knife without compromising on build quality and functionality.

Intended Use: EDC / Sports

Production Type: Industrial
Country of Manufacture: China
Blade: 10Cr15CoMoV stainless steel (Asian alloy similar to Japanese VG-10)
Blade Finish: Satin
Handle: Micarta
Blade Length: 70 mm
Blade thickness: 3 mm
Closed length: 103 mm
Overall length: 160 mm
Weight: 100 g
Lock type: Liner Lock
Clip: Removable and reversible, made of stainless steel with black PTFE coating
Packaging: Cardboard box with manufacturer’s logos
Notes: Opening mechanism features ball bearings.

The Emmet is a compact EDC folding knife designed for those seeking maximum portability without sacrificing durability and performance. Built using SOLID technology, the handle is milled from a single block of titanium or aluminum, creating an extremely durable monolithic structure.

Compact, lightweight, and practical for everyday carry, Emmet is designed to fit naturally into any pocket and offer a secure and comfortable grip despite its small size. The blade is made of CPM MagnaCut steel, available with a Stone Wash or Old Black (PVD + Stone Wash) finish, to ensure excellent cutting performance, high toughness, and outstanding corrosion resistance.

The locking bar is reinforced with a hardened steel insert, while the ceramic ball bearing system ensures smooth and precise opening and closing.

Emmet features a reversible steel clip and the REF (Removable Flipper) system: for those who prefer a cleaner profile, the flipper can be easily removed using a T6 Torx key (included) and replaced with the special screw provided in the package.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: CPM MagnaCut steel, 62/63 HRC
Blade Finish: Stonewashed
Handle: SOLID, machined from solid aluminum
Blade Length: 72 mm
Blade Thickness: 3 mm
Overall Length: 171 mm
Weight: 50 g
Closure: Frame Lock with stainless steel striker
Clip: Stainless steel, reversible and removable
Packaging: Cardboard box with LionSteel logos
Notes: Solid Frame Lock construction, CNC-machined entirely from solid stock - Removable Carson Flipper opening system - IKBS opening mechanism on ball bearings

Emmet is a compact EDC folding knife designed for those seeking maximum portability without sacrificing durability and performance. Built using SOLID technology, the handle is milled from a single block of titanium or aluminum, creating an extremely durable monolithic structure.

Compact, lightweight, and practical for everyday carry, Emmet is designed to fit naturally into any pocket and offer a secure and comfortable grip despite its small size. The blade is made of CPM MagnaCut steel, available with a Stone Wash or Old Black (PVD + Stone Wash) finish, to ensure excellent cutting performance, high toughness, and outstanding corrosion resistance.

The locking bar is reinforced with a hardened steel insert, while the ceramic ball bearing system ensures smooth and precise opening and closing.

Emmet features a reversible steel clip and the REF (Removable Flipper) system: for those who prefer a cleaner profile, the flipper can be easily removed using a T6 Torx key (included) and replaced with the special screw provided in the package.

Intended Use: Sports / EDC

Manufacturing Type: Industrial
Country of Manufacture: Italy
Blade: CPM MagnaCut steel, 62/63 HRC
Blade Finish: Stonewashed
Handle: SOLID, machined from solid titanium, with carbon fiber insert
Blade Length: 72 mm.
Blade Thickness: 3 mm.
Overall Length: 171 mm.
Weight: 65 g.
Closure: Frame Lock with stainless steel striker
Clip: Stainless steel, reversible and removable
Packaging: Cardboard box with LionSteel logos
Notes: Solid Frame Lock construction, CNC-machined entirely from solid stock – Removable Carson Flipper opening system – IKBS opening mechanism on ball bearings

Emmet is a compact EDC folding knife designed for those seeking maximum portability without sacrificing durability and performance. Built using SOLID technology, the handle is milled from a single block of titanium or aluminum, creating an extremely durable monolithic structure.

Compact, lightweight, and practical for everyday carry, Emmet is designed to fit naturally into any pocket and offer a secure and comfortable grip despite its small size. The blade is made of CPM MagnaCut steel, available with a Stone Wash or Old Black (PVD + Stone Wash) finish, to ensure excellent cutting performance, high toughness, and outstanding corrosion resistance.

The locking bar is reinforced with a hardened steel insert, while the ceramic ball bearing system ensures smooth and precise opening and closing.

Emmet features a reversible steel clip and the REF (Removable Flipper) system: for those who prefer a cleaner profile, the flipper can be easily removed using a T6 Torx key (included) and replaced with the special screw provided in the package.

Intended Use: Sports / EDC

Manufacturing Type: Industrial
Country of Manufacture: Italy
Blade: CPM MagnaCut steel, 62/63 HRC
Blade Finish: Stonewashed
Handle: SOLID, machined from solid titanium, with carbon fiber insert
Blade Length: 72 mm.
Blade Thickness: 3 mm.
Overall Length: 171 mm.
Weight: 65 g.
Closure: Frame Lock with stainless steel striker
Clip: Stainless steel, reversible and removable
Packaging: Cardboard box with LionSteel logos
Notes: Solid Frame Lock construction, CNC-machined entirely from solid stock – Removable Carson Flipper opening system – IKBS opening mechanism on ball bearings

The Emmet is a compact EDC folding knife designed for those seeking maximum portability without sacrificing durability and performance. Built using SOLID technology, the handle is milled from a single block of titanium or aluminum, creating an extremely durable monolithic structure.

Compact, lightweight, and practical for everyday carry, Emmet is designed to fit naturally into any pocket and offer a secure and comfortable grip despite its small size. The blade is made of CPM MagnaCut steel, available with a Stone Wash or Old Black (PVD + Stone Wash) finish, to ensure excellent cutting performance, high toughness, and outstanding corrosion resistance.

The locking bar is reinforced with a hardened steel insert, while the ceramic ball bearing system ensures smooth and precise opening and closing.

Emmet features a reversible steel clip and the REF (Removable Flipper) system: for those who prefer a cleaner profile, the flipper can be easily removed using a T6 Torx key (included) and replaced with the special screw provided in the package.

Intended Use: Sports / EDC

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut steel, 62/63 HRC
Blade finish: OldBlack (PVD + Stonewashed)
Handle: SOLID, machined from solid aluminum
Blade length: 72 mm.
Blade thickness: 3 mm.
Overall length: 171 mm.
Weight: 50g.
Closure: Frame Lock with stainless steel striker
Clip: Stainless steel, reversible and removable
Packaging: Cardboard box with LionSteel logos
Notes: Solid Frame Lock construction, CNC-machined entirely from solid aluminum - Removable Carson Flipper opening system - IKBS opening mechanism on ball bearings

The Emmet is a compact EDC folding knife designed for those seeking maximum portability without sacrificing durability and performance. Built using SOLID technology, the handle is milled from a single block of titanium or aluminum, creating an extremely durable monolithic structure.

Compact, lightweight, and practical for everyday carry, Emmet is designed to fit naturally into any pocket and offer a secure and comfortable grip despite its small size. The blade is made of CPM MagnaCut steel, available with a Stone Wash or Old Black (PVD + Stone Wash) finish, to ensure excellent cutting performance, high toughness, and outstanding corrosion resistance.

The locking bar is reinforced with a hardened steel insert, while the ceramic ball bearing system ensures smooth and precise opening and closing.

Emmet features a reversible steel clip and the REF (Removable Flipper) system: for those who prefer a cleaner profile, the flipper can be easily removed using a T6 Torx key (included) and replaced with the special screw provided in the package.

Intended Use: Sports / EDC

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut steel, 62/63 HRC
Blade finish: OldBlack (PVD + Stonewashed)
Handle: SOLID, machined from solid aluminum
Blade length: 72 mm.
Blade thickness: 3 mm.
Overall length: 171 mm.
Weight: 50g.
Closure: Frame Lock with stainless steel striker
Clip: Stainless steel, reversible and removable
Packaging: Cardboard box with LionSteel logos
Notes: Solid Frame Lock construction, CNC-machined entirely from solid aluminum - Removable Carson Flipper opening system - IKBS opening mechanism on ball bearings

Benchmade 535-09 Bugout® - The premium EDC with a unique twist!

We decided to innovate with this premium Bugout®, blending distinctive materials and details. Inspired by the natural tones of outdoor gear, the 535-09 Bugout® is distinguished by its grips that combine a gray 6061-T6 anodized aluminum bolster with a Redstone Richlite onlay, enhanced by vibrant color touches such as the orange anodized thumb stud and backspacer.

The CPM-S90V blade with stonewashed polished finish provides exceptional performance while maintaining the light weight and compactness that have made the Bugout® series ideal for EDC and outdoor adventures, from the mountain trail to everyday city activities.

Intended Use: Sporty / EDC

Production type: Industrial
Country of manufacture: USA
Blade: CPM-S90V stainless steel at 59/61HRC
Blade Finish: Stonewashed
Handle: anodized 6061-T6 aluminum with Redstone-colored Richlite inserts
Blade length: 82mm.
Blade thickness: 2.3mm.
Length closed: 107mm.
Total length: 189mm.
Thickness when closed: 10.5mm
Weight: 71.5g.
Closure: Axis Lock (Crossbar Lock)
Clip: Removable and reversible, stonewashed stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: “premium” version of the well-known EDC Bugout

The Para Military 2 Lightweight represents the evolution of one of Spyderco’s most popular knives, combining high performance, low weight, and maximum reliability. The injection-molded FRN (fiberglass-reinforced nylon) scales ensure lightness and durability, while the exclusive Bi-Directional Texture provides a secure, non-slip grip in all conditions. The Compression Lock mechanism ensures a solid and reliable blade lock, while helping to keep the knife’s overall weight down.

The full-flat-ground blade in nitrogen-enriched CTS BD1N stainless steel offers an excellent balance of edge retention, strength, corrosion resistance, and ease of resharpening. The design is completed by the famous Trademark Round Hole for quick, ambidextrous opening, as well as ergonomic details designed to ensure precision and control during every use.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: CTS BD1N stainless steel
Blade Finish: Stonewashed
Handle: FRN Bi-Directional Texture
Blade Length: 88mm.
Blade Thickness: 3.7mm.
Closed length: 122 mm.
Overall length: 211 mm.
Weight: 78 g.
Closure: Compression Lock
Clip: Stainless steel, removable and ambidextrous
Packaging: Cardboard box with Spyderco logos
Notes: Lightweight version of the well-known Para Military 2 model

The Boker Super Conductor is an exclusive premium EDC folding knife that combines cutting-edge materials engineering with the renowned manufacturing tradition of Solingen, Germany. At the heart of the design is a MagnaCut steel blade, hardened to 62 HRC ±1, offering an exceptional balance of edge retention, impact resistance, and corrosion protection. The result is long-lasting cutting ability and reliable performance in both everyday use and the most demanding applications.

Designed by renowned designer Brian Efros, the Super Conductor stems from a holistic vision in which every component contributes to the tool’s overall efficiency. The blade, featuring a Drop Point profile, false bevel, and Saber Grind, ensures high operational versatility while guaranteeing precision and structural integrity.

The modern, technical aesthetic is enhanced by the refined two-tone stonewash and satin finish, while the titanium handle with carbon fiber insert ensures a perfect balance between lightness, strength, and ergonomics. Rounding out the features are a reliable Frame Lock, quick opening via a Flipper, and a practical felt sheath included.

Produced in a limited series of only 350 pieces worldwide, the Boker Super Conductor is an exclusive offering for collectors and enthusiasts seeking premium materials, contemporary design, and uncompromising performance.

Intended use: Sport / Collectible

Production type: Industrial
Country of manufacture: Germany
Blade: CPM-MagnaCut steel, 62 HRC
Blade finish: Satin and Stone Washed
Handle: Titanium with carbon fiber inserts
Blade length: 87 mm.
Blade thickness: 3.2mm.
Overall length: 200mm.
Weight: 120g.
Clip: Titanium, removable
Closure: Frame lock
Packaging: Cardboard box with Boker logos, felt pouch with zipper
Notes: Design by Brian Efros - Limited edition of only 350 numbered pieces

The Spartan SHF is the result of a collaboration between Spartan Blades, Tu Lam of Ronin Tactics, and renowned knife designer Bill Harsey.

Designed as a high-performance folder, the SHF is intended for EDC, tactical, and field use, combining ruggedness, ergonomics, and precision craftsmanship.

The 3.95" blade in Chad Nichols Damascus stainless steel is the heart of the design, complemented by a construction made almost entirely of titanium: with the exception of the blade, pivot, and lock pin, every structural component is crafted from this material, ensuring an ideal balance between lightness and strength.

The ergonomic handle is designed for intensive use, with finger grooves and jimping that improve grip even in critical conditions. The internal anti-over-travel system protects the opening mechanism, while the reversible titanium clip allows for ambidextrous tip-up carry. The dual thumb studs, made immediately accessible by a milled ramp on the handle, allow for a quick, smooth, and intuitive opening.

Every detail of the SHF reflects Spartan Blades’ philosophy: to create reliable, functional tools built to last, without compromising on performance or quality.

The Long Gunner Damascus Edition adds a strong narrative and collectible dimension. The Damascus blade features unique and one-of-a-kind patterns, while the engraved titanium scales depict a sniper in an artistic style inspired by Japanese tradition, with symbolic references to the world of “long gunners.”

The involvement of Tu Lam, a U.S. Special Forces veteran and founder of Ronin Tactics, further strengthens the project’s connection to real-world operational culture. His experience with the Green Berets and his “modern samurai” philosophy help give the SHF a dimension that goes beyond the tool itself: a modern interpretation of discipline, resilience, and tactical mindset.

The result is a knife that combines engineering, operational experience, and cultural identity: not only a cutting tool of the highest caliber, but also a tribute to contemporary military tradition and the figure of the professional who operates in the shadows.

Intended use: Collectible / Sport

Production type: MidTech
Country of manufacture: USA
Blade: handcrafted stainless Damascus steel, by Chad Nichols
Blade treatment: -
Handle: 6AL4V titanium with custom engravings
Blade length: 103mm.
Blade thickness: 3.91mm.
Closed length: 126mm
Total length: 225mm.
Weight: 167g.
Lock: FrameLock
Clip: Anodized titanium with custom engravings
Packaging: Cardboard box with Spartan Blades logos, warranty certificate
Notes: Design by William Harsey - Numbered and limited edition (knife #233) Ronin Long Runner in collaboration with designer Tu Lam of Ronin Tactics

The Chnops Tactical is a more aggressive and functional reinterpretation of the original Chnops design, intended for tactical and high-performance use.

The Hybrid Cryo steel blade, developed by Midgard Messer with support from the Austrian manufacturer Böhler, offers an excellent balance of toughness, ease of resharpening, and corrosion resistance, with a hardness optimized between HRC 59-61 thanks to cryogenic treatment. This solution allows the material’s characteristics to be tailored to the specific needs of each knife, improving its overall performance.

The blade design, inspired by tactical lines, emphasizes control, penetration, and structural strength, while the flipper system ensures quick and intuitive opening in any situation. The black G10 handle and robust construction ensure high safety in use and superior control even in the most demanding conditions, making this model a reliable and modern technical tool.

Intended use: sports/collector's item

Production type: Industrial
Country of manufacture: Italy
Blade: Hybrid Cryo steel, 59/61 HRC
Blade finish: Black Idroglider
Handle: G10 with internal stainless steel liners
Blade length: 70 mm.
Blade thickness: 3mm.
Closed length: 102mm.
Total length: 180mm.
Handle thickness: 12 mm
Weight: 80 g
Closing mechanism: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Carson Flipper opening system on ball bearings - Design by Riccardo Gobbato / Raven Design

The Chnops Tactical is a more aggressive and functional reinterpretation of the original Chnops design, intended for tactical and high-performance use.

The Hybrid Cryo steel blade, developed by Midgard Messer with support from the Austrian manufacturer Böhler, offers an excellent balance of toughness, ease of resharpening, and corrosion resistance, with a hardness optimized between HRC 59-61 thanks to cryogenic treatment. This solution allows the material’s characteristics to be tailored to the specific needs of each knife, improving its overall performance.

The blade design, inspired by tactical lines, emphasizes control, penetration, and structural strength, while the flipper system ensures quick and intuitive opening in any situation. The black G10 handle and robust construction ensure high safety in use and superior control even under the most demanding conditions, making this model a reliable and modern technical tool.

Intended use: sports/collector's item

Production type: Industrial
Country of manufacture: Italy
Blade: Hybrid Cryo steel, 59/61 HRC
Blade finish: Stonewashed
Handle: G10 with internal stainless steel liners
Blade length: 70 mm.
Blade thickness: 3mm.
Closed length: 102mm.
Total length: 180mm.
Handle thickness: 12 mm
Weight: 80 g
Closing mechanism: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Carson Flipper opening system on ball bearings - Design by Riccardo Gobbato / Raven Design

Compact in size yet packed with technical features and premium materials, this folding knife designed by Jesper Voxnaes combines functionality, style, and sustainable innovation. The Böhler M398 steel blade with a stone-washed finish ensures high cutting performance, excellent corrosion resistance, and a hardness of HRC 60-62, making it ideal for advanced daily use.

The M49 cellulose acetate handle is one of the project’s most distinctive features: a next-generation bioplastic developed by Mazzucchelli 1849 that combines aesthetic quality, high mechanical performance, and a significant bio-based and biodegradable component. Traditionally used in high-end eyewear, this special formulation offers unique texture, color depth, and tactile feel, while also helping to reduce environmental impact.

Rounding out the knife are the liner lock mechanism, stone-washed titanium inserts, a polished reversible clip, and a construction entirely made in Italy, designed for those seeking a refined, technical, and contemporary EDC.

Intended use: Sports

Production type: Industrial
Country of manufacture: Italy
Blade: M398 stainless steel, 60/62 HRC
Blade finish: Stonewashed
Handle: M49 cellulose acetate, with internal stainless steel liners and titanium spacer
Blade length: 60 mm.
Blade thickness: 4mm.
Closed length: 88mm.
Total length: 148mm.
Thickness when closed: 11mm
Weight: 85g.
Closure: Liner Lock
Clip: flush-mounted, polished stainless steel, removable and reversible
Packaging: Display box made of clear film
Notes: Opens via Carson Flipper system - Ball-bearing action - Design by Jesper Voxnaes

SATRE F è un chiudibile compatto pensato per uso quotidiano. Mantiene l’impostazione robusta della linea SATRE in un formato tascabile, con ingombri ridotti e portabilità reale. Sta in tasca senza dare fastidio, ma quando serve è pronto.

Apertura flipper rapida e controllabile con una mano. Struttura con doppia cartella in acciaio e blocco Liner-Lock: rigido, affidabile, senza giochi. La clip deep carry lo rende discreto in tasca. La fresatura sulla guancetta non è solo estetica: permette di identificare subito la variante anche da chiuso.

Le versioni in Böhler N690Co (Black, Stone Washed) puntano su resistenza all’usura e buona tenuta del filo, con manutenzione semplice. Le varianti in acciaio Nitrogen (Periwinkle, Orange, Yellow) privilegiano la resistenza alla corrosione, ideali per ambienti umidi o uso intensivo all’aperto. La versione Outdoor Nitrogen è la più orientata all’impiego sul campo.

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: Stonewashed
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 98 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

SATRE F è un chiudibile compatto pensato per uso quotidiano. Mantiene l’impostazione robusta della linea SATRE in un formato tascabile, con ingombri ridotti e portabilità reale. Sta in tasca senza dare fastidio, ma quando serve è pronto.

Apertura flipper rapida e controllabile con una mano. Struttura con doppia cartella in acciaio e blocco Liner-Lock: rigido, affidabile, senza giochi. La clip deep carry lo rende discreto in tasca. La fresatura sulla guancetta non è solo estetica: permette di identificare subito la variante anche da chiuso.

Le versioni in Böhler N690Co (Black, Stone Washed) puntano su resistenza all’usura e buona tenuta del filo, con manutenzione semplice. Le varianti in acciaio Nitrogen (Periwinkle, Orange, Yellow) privilegiano la resistenza alla corrosione, ideali per ambienti umidi o uso intensivo all’aperto. La versione Outdoor Nitrogen è la più orientata all’impiego sul campo.

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: MIL-C-13924 burnishing
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 98 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

SATRE F è un chiudibile compatto pensato per uso quotidiano. Mantiene l’impostazione robusta della linea SATRE in un formato tascabile, con ingombri ridotti e portabilità reale. Sta in tasca senza dare fastidio, ma quando serve è pronto.

Apertura flipper rapida e controllabile con una mano. Struttura con doppia cartella in acciaio e blocco Liner-Lock: rigido, affidabile, senza giochi. La clip deep carry lo rende discreto in tasca. La fresatura sulla guancetta non è solo estetica: permette di identificare subito la variante anche da chiuso.

Le versioni in Böhler N690Co (Black, Stone Washed) puntano su resistenza all’usura e buona tenuta del filo, con manutenzione semplice. Le varianti in acciaio Nitrogen (Periwinkle, Orange, Yellow) privilegiano la resistenza alla corrosione, ideali per ambienti umidi o uso intensivo all’aperto. La versione Outdoor Nitrogen è la più orientata all’impiego sul campo.

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: MIL-C-13924 burnishing
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 98 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

SATRE F è un chiudibile compatto pensato per uso quotidiano. Mantiene l’impostazione robusta della linea SATRE in un formato tascabile, con ingombri ridotti e portabilità reale. Sta in tasca senza dare fastidio, ma quando serve è pronto.

Apertura flipper rapida e controllabile con una mano. Struttura con doppia cartella in acciaio e blocco Liner-Lock: rigido, affidabile, senza giochi. La clip deep carry lo rende discreto in tasca. La fresatura sulla guancetta non è solo estetica: permette di identificare subito la variante anche da chiuso.

Le versioni in Böhler N690Co (Black, Stone Washed) puntano su resistenza all’usura e buona tenuta del filo, con manutenzione semplice. Le varianti in acciaio Nitrogen (Periwinkle, Orange, Yellow) privilegiano la resistenza alla corrosione, ideali per ambienti umidi o uso intensivo all’aperto. La versione Outdoor Nitrogen è la più orientata all’impiego sul campo.

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: MIL-C-13924 burnishing
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 98 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

SATRE F è un chiudibile compatto pensato per uso quotidiano. Mantiene l’impostazione robusta della linea SATRE in un formato tascabile, con ingombri ridotti e portabilità reale. Sta in tasca senza dare fastidio, ma quando serve è pronto.

Apertura flipper rapida e controllabile con una mano. Struttura con doppia cartella in acciaio e blocco Liner-Lock: rigido, affidabile, senza giochi. La clip deep carry lo rende discreto in tasca. La fresatura sulla guancetta non è solo estetica: permette di identificare subito la variante anche da chiuso.

Le versioni in Böhler N690Co (Black, Stone Washed) puntano su resistenza all’usura e buona tenuta del filo, con manutenzione semplice. Le varianti in acciaio Nitrogen (Periwinkle, Orange, Yellow) privilegiano la resistenza alla corrosione, ideali per ambienti umidi o uso intensivo all’aperto. La versione Outdoor Nitrogen è la più orientata all’impiego sul campo.

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: N690Co stainless steel, 58 HRC
Blade finish: MIL-C-13924 burnishing
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 96.5 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: N690Co stainless steel, 58 HRC
Blade finish: Stonewashed
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 96.5 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

Opinel x monbento Origines Lunch Kit

The Origines lunch kit is the result of a collaboration between monbento and Opinel, designed to make eating on the go simpler, more practical, and more sustainable.

This limited edition combines the expertise of two historic French brands in an elegant and functional set, designed to accompany you every day at the office, while traveling, during a picnic, or on outdoor adventures.

Premium materials—stainless steel and beech wood—come together in a contemporary design inspired by a return to the essentials and the conviviality of the nomadic meal.

What’s included in the Origines kit
1L Sense L Lunch Box

The Sense L Lunch Box is a lightweight, sturdy, and durable metal lunch container, designed to last and simplify meals on the go.

Features:

1-liter capacity
Durable and lightweight metal construction
Oven, microwave, and stovetop safe (without lid)
Comes with a beechwood cutting board
Reusable and ideal for daily use
Elegant and practical design

Thanks to its versatile design, the Sense L becomes an indispensable accessory for those seeking a sustainable alternative to disposable containers.

Opinel néo6 Pocket Knife

The néo6 is a compact and easy-to-handle pocket knife that reinterprets the iconic Opinel style with a contemporary twist.

Features:

7 cm stainless steel blade with a rounded tip
OPIFLEX® system that keeps the blade open or closed without locking it
Varnished beechwood handle
Leather lanyard
Compact, practical, and designed for everyday use

Perfect for picnics, lunch breaks, and outdoor activities, offering both practicality and safety.

“Origines” Design

The packaging and the knife are decorated with the “Origines” motif, inspired by cave drawings and symbols of nature.

These motifs evoke a return to the essentials: eating on the go with practical, elegant items built to last.

Technical Specifications
Product Name: Opinel x monbento Origines Meal Kit
Lunch Box Capacity: 1 L
Materials: stainless steel and beech wood
Limited Edition: 3,500 pieces
Usage: office, travel, outdoor, picnic

Atlas goes “Army”! Once again, the proven Boker Plus Atlas revitalizes the EDC world with a fresh take: a two-handed knife with a minimalist design that retains the same expressive power and timeless appeal as other models in the same family.

Available in a limited edition, exclusively at select retailers, this Boker Plus Atlas OD Green version combines rugged reliability, understated elegance, and surprising lightness. As an EDC folding knife, it features a full stainless steel handle with a military green Cerakote coating, ideal for everyday use. The minimalist construction ensures high durability without adding unnecessary bulk.

The Drop Point blade, made from Swedish 12C27 steel, offers excellent corrosion resistance, low wear, and ease of sharpening. To accentuate its tactical and discreet look, the blade is finished with a scratch-resistant PVD coating that also reduces light reflections.

The Atlas OD Green retains the proven opening system of its predecessors: thanks to the nail nick and slipjoint mechanism, the blade opens smoothly and closes securely. The black details (lanyard hole, clip, screws, and rivets) complete the military-inspired aesthetic, making this knife perfect for both everyday use and a bold style.

Production type: Industrial
Country of manufacture: China
Blade: Sandvik 12C27 stainless steel with Black PVD coating
Handle: stainless steel with Cerakote coating
Blade length: 75mm.
Blade thickness: 2.3mm.
Overall length: 168mm.
Weight: 49g.
Clip: Black PVD-coated stainless steel, removable
Packaging: cardboard box with manufacturer’s logos
Notes: limited edition available exclusively at select retailers

What the Rock! A powerful, compact pocket knife at a surprisingly affordable price: the Böker Plus Rockstub is the answer for those looking for an uncompromising tool for everyday use.

The Drop Point blade in 14C28N steel with a rustic Black Stonewash finish and decorative ricasso guarantees solidity, resistance, and reliable cutting performance. Powerful and controlled cuts, carving work, or simple tasks such as peeling: the Rockstub proves to be a real rock in every situation.

The practical ambidextrous thumb stud opening system and solid crossbar lock ensure ease of use, safety, and speed of action. The deep carry clip allows for discreet and comfortable carrying.

The brown micarta handle, pleasant to the touch and perfectly ergonomic, offers a secure grip even during prolonged use and is complemented by a lanyard hole, ideal for customizing or further enhancing practicality.

Universal, gritty, reliable. Rockstub: when solidity meets the essential.

Intended use: EDC / Sports 

Type of production: Industrial
Country of production: China
Blade: Sandvik 14C28N stainless steel
Blade finish: Black Stonewashed
Handle: micarta, with stainless steel inner scales
Blade length: 67mm
Blade thickness: 3mm
Closed length: 97mm
Total length: 160mm
Weight: 87g 
Closure: Crossbar Lock
Clip: Removable and reversible, stainless steel, deep carry type
Packaging: Cardboard box with Böker Plus logos
Notes: -

What the Rock! A powerful pocket knife with a rock-solid 14C28N steel blade, crossbar lock, and deep carry clip at an attractive price? Böker Plus makes it possible and presents the compact Rockstub as the ideal answer for those looking for a no-compromise knife for everyday use.

Versatile, rugged, reliable – no other words are needed to describe the drop point blade with matching stonewash finish and decorative ricasso. Powerful, controlled cuts, as well as carving or simple peeling, make this knife a real rock among the waves, ready for any application.

Thanks to the practical ambidextrous pivot for opening and the slider for opening and unlocking the folder, the Rockstub immediately wins over even the most demanding enthusiasts. The black aluminum handle is extremely comfortable in the hand and also features a lanyard hole, ideal for attaching a cord.

Intended use: EDC / Sports 

Type of production: Industrial
Country of production: China
Blade: Sandvik 14C28N stainless steel
Blade finish: Stonewashed
Handle: aluminum, with stainless steel inner scales
Blade length: 67mm
Blade thickness: 3mm
Closed length: 97mm
Total length: 160mm
Weight: 87g 
Closure: Crossbar Lock
Clip: Removable and reversible, stainless steel, deep carry type
Packaging: Cardboard box with Böker Plus logos
Notes: -

What the Rock! A powerful pocket knife with a rock-solid 14C28N steel blade, crossbar lock, and deep carry clip at an attractive price? Böker Plus makes it possible and presents the compact Rockstub as the ideal answer for those looking for a no-compromise knife for everyday use.

Versatile, rugged, reliable – no other words are needed to describe the drop point blade with matching stonewash finish and decorative ricasso. Powerful, controlled cuts, as well as carving or simple peeling, make this knife a real rock among the waves, ready for any application.

Thanks to the practical ambidextrous pivot for opening and the slider for opening and unlocking the folder, the Rockstub immediately wins over even the most demanding enthusiasts. The deep blue aluminum handle is extremely comfortable in the hand and also features a lanyard hole, ideal for attaching a cord.

Intended use: EDC / Sports 

Type of production: Industrial
Country of production: China
Blade: Sandvik 14C28N stainless steel
Blade finish: Stonewashed
Handle: Anodized aluminum, with stainless steel inner scales
Blade length: 67mm
Blade thickness: 3mm
Closed length: 97mm
Total length: 160mm
Weight: 87g 
Closure: Crossbar Lock
Clip: Removable and reversible, stainless steel, deep carry type
Packaging: Cardboard box with Böker Plus logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Like new, never used and never removed from its packaging
* Available on the market Limited edition of 130 pieces
* Sharpening: Factory sharpened
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Sheath: /
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

The M1A1 model is Extrema Ratio's personal interpretation, created to pay homage to the historic folding knife used by the Italian Army.

During World War II, the original knife was part of the British Army's equipment. At the end of the war, thanks to the “Marshall Plan” for European recovery, the Italian Army received some of the weapons and equipment supplied to the Allies during the war, including this multifunctional tool. It was later reproduced in Italy in three modified versions.

Extrema Ratio, to bid farewell to this historic and renowned knife, presents a final exclusive version, limited to only 130 pieces.

Like its predecessor, the M1A1 LAST CALL is equipped with a can opener, bottle opener, screwdriver, and knot-tying peg. The reversible clip is designed for maximum concealability.

The drop blade, like all the other tools listed above, features Geotech Camo customization, Extrema Ratio's innovative and original camouflage pattern, created using laser engraving.

The locking mechanism used is the tried and tested LINER LOCK. The handle consists of two anticorodal aluminum scales anodized in the brand new Tactical Mud color.

Type of production: industrial
Blade: N690Co 58HRC stainless steel with Geotech Camo finish
Country of production: Italy
Handle: Anticorodal in Tactical Mud color
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 99mm.
Total length: 168mm.
Weight: 124g.
Closure: Liner Lock
Clip: reversible and removable stainless steel
Notes: Screwdriver, can opener, bottle opener, knot untangler - serial number 81

The Boker Plus Little Friend Black is a compact EDC pocket knife that combines modern design, premium materials, and maximum practicality for everyday use. Designed by Danish designer Jesper Voxnaes, this one-handed folder stands out for its clean lines and ergonomics studied in detail.

The ball-bearing Drop Point blade, made of CPM-S35VN steel, guarantees excellent edge retention, wear resistance, and great reliability over time. The elegant hairline finish, together with the gold anodized elements on the backspacer and pivot screw, further enhances the refined and sophisticated character of the knife. Opening is smooth and precise, thanks to the flipper or thumb hole.

The liner lock ensures stable locking during use, while the black G10 scales offer a firm and comfortable grip. The EDC profile is completed by the deep-carry clip (tip-up, right side) for discreet carry and the lanyard hole for even greater versatility. A compact, elegant, and high-performance everyday companion.

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: CPM-S35VN stainless steel
Blade finish: Satin
Handle: G10
Blade length: 78.6mm.
Blade thickness: 4 mm.
Closed length: 108 mm.
Total length: 188 mm.
Weight: 135 g.
Clip: stainless steel, removable
Lock: Liner Lock
Packaging: cardboard box with Boker Plus logos, nylon pouch with zip
Notes: Design by Jesper Voxnaes

The Boker Plus Gemtek Black G10 designed by Alessandra de Santis redefines the concept of versatility: pure efficiency and fluid dynamism coexist in a knife capable of ranging from EDC to tactical use, covering every nuance in between. The Hydra Design designer is known for creations focused on functionality and performance, and this folder is the perfect expression of this.

The stainless steel construction with a solid frame lock ensures strength and reliability, while the modified drop-point blade with ball bearings, made of durable D2 steel, ensures excellent edge retention and high wear resistance. The flipper opening is quick and precise, and the stonewash finish gives it an attractive look as well as offering greater protection against scratches and signs of wear.

The handle features a black G10 front scale with a discreet triangular texture that ensures a firm grip and optimal control. Careful details such as the black backspacer with integrated lanyard hole and the black G10 triangular insert on the pivot screw complete the aesthetics of this tactically inspired folder.

Equipped with a deep-carry tip-up clip, the knife can be carried discreetly, making it virtually invisible in your pocket. A real gem for knife enthusiasts and those looking for a reliable, high-performance tool with a strong character.

Intended use: Sports 

Type of production: Industrial
Country of production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: G10 and stainless steel
Blade length: 72mm.
Blade thickness: 3.7 mm.
Total length: 176 mm.
Weight: 135 g.
Clip: removable, stainless steel
Closure: Frame Lock 
Packaging: cardboard box with Boker Plus logos
Notes: opens using the Carson Flipper system on ball bearings - design by Alessandra De Santis

A limited edition that enchants: the Classic SD Alox 2026
The Classic SD Alox Limited Edition 2026 multi-purpose knife is inspired by the resilience of nature, an original piece that will drive collectors around the world crazy. Symbolizing the silent strength and enduring movement of an alpine glacier, the exclusive glacier blue color is as fresh as it is vibrant. Crafted with skill, attention to durability, and five ingeniously integrated functions, it is a perfect multi-tool for everyday use.

A design that wins everyone over
With its exclusive style and iconic Alox scales, this multi-tool captures the attention of those who love refined design. It is not only a collector's item, but also a fashionable product, designed to satisfy the most demanding tastes and to stand out on any occasion.

Compact practicality and absolute versatility
The Classic SD Alox is small but powerful. It offers essential features such as a sharp blade, precision scissors, and a nail file, making it indispensable for tackling small everyday challenges with style and practicality. It is ideal for those who want a functional and fashionable accessory.

Premium materials and uncompromising quality
Like every Victorinox product, the Classic SD Alox is synonymous with Swiss excellence. Made from the highest quality materials, it ensures strength and durability, maintaining an impeccable appearance even after years of use. The bold and unique Stone Red color adds a touch of inimitable character.

An irresistible collection for enthusiasts and collectors
In addition to the Classic SD, the Limited Edition Alox 2026 also includes the Pioneer X Alox and Evoke Alox models, offering a complete range of features and styles. This exclusive collection is a must-have for fans of the Victorinox brand and for those looking for the perfect blend of utility and distinctive design.

Functions:
1. blade (length 40 mm)
2. nail file
3. screwdriver
4. scissors
5. key ring

Victorinox Synergy Alox 0.8216.20 is a modern and essential pocket multitool, designed to combine minimalist aesthetics with everyday functionality in a compact and durable format. Part of the prestigious Alox Refined collection by Victorinox, this tool blends Swiss quality with a sleek anodized red aluminum design, making it ideal for anyone looking for a versatile, lightweight, and always-ready knife.

Equipped with nine practical functions including a locking blade, bottle opener, screwdrivers, and nail file, the Synergy Alox stands out for its perfect balance between design and utility, accompanying your daily activities with style.

Intended use: Everyday use / EDC (Everyday Carry)
Manufacturing type: Precision industrial
Country of origin: Switzerland
Blade: Stainless steel (type 1.4110 / X55CrMo14)
Blade finish: Satin polished
Handle: Anodized aluminum Alox
Blade length: ~70 mm
Blade thickness: ~2.6 mm
Closed length: 93 mm
Total length: ~163 mm (open)
Closed thickness: 17 mm
Weight: 77 g
Locking mechanism: Liner-lock (blade lock)
Clip: Tip-down pocket clip (right-handed)
Packaging: Standard Victorinox packaging
Notes: Alox Refined Collection – minimalist design with integrated clip, perfect for urban and daily use.

Included tools:
- Large blade
- Package opener
- 3 mm screwdriver
- Nail file
- Nail cleaner
- Bottle opener
- 7 mm screwdriver
- Wire stripper
- Pocket clip

Victorinox Synergy Alox 0.8216.22 is a modern and essential pocket multitool, designed to combine minimalist aesthetics with everyday functionality in a compact and durable format. Part of the prestigious Alox Refined collection by Victorinox, this tool blends Swiss quality with a sleek anodized blue aluminum design, making it ideal for anyone looking for a versatile, lightweight, and always-ready knife.

Equipped with nine practical functions including a locking blade, bottle opener, screwdrivers, and nail file, the Synergy Alox stands out for its perfect balance between design and utility, accompanying your daily activities with style.

Intended use: Everyday use / EDC (Everyday Carry)
Manufacturing type: Precision industrial
Country of origin: Switzerland
Blade: Stainless steel (type 1.4110 / X55CrMo14)
Blade finish: Satin polished
Handle: Anodized aluminum Alox
Blade length: ~70 mm
Blade thickness: ~2.6 mm
Closed length: 93 mm
Total length: ~163 mm (open)
Closed thickness: 17 mm
Weight: 77 g
Locking mechanism: Liner-lock (blade lock)
Clip: Tip-down pocket clip (right-handed)
Packaging: Standard Victorinox packaging
Notes: Alox Refined Collection – minimalist design with integrated clip, perfect for urban and daily use.

Included tools:
- Large blade
- Package opener
- 3 mm screwdriver
- Nail file
- Nail cleaner
- Bottle opener
- 7 mm screwdriver
- Wire stripper
- Pocket clip

Inspired by the legendary F-117 Stealth, the 0117 brings the same angular precision and engineering efficiency to a modern everyday carry. The slim, sculpted profile is unmistakably ZT: refined, contemporary, and designed for those who appreciate understated complexity. The lightweight carbon fiber handle pairs with a two-tone CPM MagnaCut blade, with satin and stonewashed finishes, striking a perfect balance between elegance and character. The custom thumb stud and precision-machined DuraLock mechanism ensure smooth and secure operation, while titanium spacer tubes and partially integrated liners maintain a solid structure without adding weight. Sleek and functional, the 0117 represents ZT's vision of modern precision.

Key features
* Premium Made in USA folder designed for a slim and refined EDC; lightweight carbon fiber scales
* CPM MagnaCut blade with excellent edge retention, toughness, and corrosion resistance; two-tone satin/stonewashed finish for a sophisticated look
* Slim DuraLock design with custom thumb stud and precision-machined lock pin; smooth opening on KVT bearings
* Partially integrated liners and tubular titanium spacers for maximum strength at reduced weight
* Deep-carry wraparound clip for secure and balanced carry, reversible right/left

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-MagnaCut steel at 62/64HRC
Blade finish: Satin
Handle: Carbon fiber with blue anodized titanium spacers and Black Oxide screws
Blade length: 84mm.
Blade thickness: 2.3mm.
Closed length: 116mm.
Total length: 200mm.
Weight: 54g.
Closure: DuraLock (modified Cross Bar Lock / Axis Lock)
Clip: Removable and reversible, deep pocket type, stainless steel treated with Cerakote
Packaging: cardboard box with Zero Tolerance logos
Notes: flipper opening system on KVT ceramic ball bearings

Reliable, easy to handle, and built to last, the Duster is like your first car: simple, solid, and always ready to go. Compact and comfortable, this EDC offers practicality you'll come back to every day. The modified sheepsfoot blade improves control in everyday cutting tasks, while the stonewashed 8Cr13MoV steel maintains a good edge and masks signs of wear. The fiberglass-reinforced nylon scales provide grip and lightness, combined with an aluminum backspacer for a touch of contrast. On KVT ball bearings, the blade opens smoothly and locks securely thanks to DuraLock. Direct and functional, Duster is your next “everyday driver.”

Main features:
* Compact, reliable, and simple EDC; modified sheepsfoot blade for control and cutting efficiency
* 8Cr13MoV stainless steel blade, easy to resharpen and with good edge retention; stonewashed finish that hides wear
* Anthracite gray reinforced nylon handle with contrasting black aluminum backspacer
* Manual opening on KVT bearings with ambidextrous pins; secure and intuitive DuraLock lock
* Reversible right/left deep-carry clip; lanyard hole

Intended use: EDC / Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Stonewashed
Handle: GFN (Glass Filled Nylon) with stainless steel inner scales
Blade length: 74mm.
Blade thickness: 2.3mm.
Closed length: 98mm.
Total length: 171mm.
Weight: 57g.
Opening: via ambidextrous pins on the blade
Washers: with KVT ball bearings
Closure: DuraLock (modified Crossbar Lock / Axis Lock)
Clip: deep pocket, Black Oxide stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Notes: Opens on KVT ball bearings - Uses the new patented DuraLock closure system (similar to the AxisLock system used by Benchmade)

KNIFE TAKEN FROM A PRIVATE COLLECTION
* Origin: Taken back from a private owner, previously purchased
* Condition: Like new, never used, without box
* Availability on the market: Discontinued
* Edge: Factory edge
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: Cordura sheath with insert for the two included blades
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house workshop

Intended use: Collection, light outdoor
Production type: Industrial
Country of origin: United States of America
Blade: Stainless steel, plain edge
Blade finish: Bead blasted
Handle: GRN (Glass Reinforced Nylon) with textured surface
Blade length: 83mm
Blade thickness: -
Closed length: 107mm
Overall length: 187mm
Closed thickness: -
Weight: 74g
Locking mechanism: Gerber patented Bolt Action
Clip: None
Packaging: Original Gerber sheath complete with two interchangeable blades (saw blade and skinning blade)
Notes: Late 1980s vintage knife, Made in USA, 1st Production Run, never used, never sharpened, mint condition

Asile is a French artist and illustrator. Her work is a celebration of kindness, with a universe populated by colorful fauna and flora, and happy individuals. 

The N°08 Cosmos Asile features two different but equal characters. Here there is no duality, but a pairing, a balance. The moon on which they sit becomes a space for encounter and delicacy, between dream and reality. Three birds carry stars around them, as if they were redrawing a constellation. 

The pocket knife has a PEFC hornbeam handle with sublimation decoration and an 8.5 cm stainless steel blade. It comes with a box, which echoes the motifs of the knife, and a postcard.

Limited edition of 8200 pieces, numbered blades.

Intended use: Collection

Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade finish: satin
Handle: hornbeam wood, with 3D sublimation decoration
Blade length: 85mm.
Blade thickness: 1.5 mm.
Closed length: 107 mm.
Total length: 190 mm.
Weight: 42 g.
Closure: Viro-Block
Packaging: Cardboard box with Opinel logos

Dalkhafine is a multifaceted French artist who works in various disciplines: illustration, motion design, screen printing, painting, clothing, and much more. His world is colorful and largely inspired by nature.

The N°08 Cosmos Dalkhafine depicts the encounter between earthly power and cosmic energy: the strong and majestic tiger bows before the mermaid, whose head shines like the sun. The sun represents the sovereign star that watches over the universe, just as the mermaid watches over the moon.

The pocket knife has a PEFC hornbeam handle with sublimation decoration and an 8.5 cm stainless steel blade. It comes with a box, which echoes the motifs of the knife, and a postcard.

Limited edition of 8,200 pieces, numbered blades.

Intended use: Collection

Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade finish: satin
Handle: hornbeam wood, with 3D sublimation decoration
Blade length: 85 mm.
Blade thickness: 1.5 mm.
Closed length: 107 mm.
Total length: 190 mm.
Weight: 42 g.
Closure: Viro-Block
Packaging: Cardboard box with Opinel logos

The Böker Plus The Dace is an agile, fast, and incredibly versatile pocket knife. Conceived by designer and avid fisherman Joe Mangiafico, this new project draws inspiration from the fish from which it takes its name, reinterpreting its slender silhouette in an elegant and functional form.

Designed to move confidently through the “waters” of everyday EDC, The Dace excels at cutting cardboard, rope, and packaging, without sacrificing precision on fish and meat. The drop-point blade with ball bearing opening, made of Nitro-V with high edge retention and corrosion resistance, snaps decisively when the flipper is activated, while the liner lock remains perfectly integrated into the flat gray 6061-T6 aluminum handle.

Iridescent blue anodized details—such as the tip-up clip, flat pivot screw, and handle screws—add a distinctive touch. The pronounced stonewash finish, non-slip jimping on the blade spine, and decorative ricasso complete a knife that combines style and performance.

Intended use: EDC / Sports 

Type of production: Industrial
Country of production: China
Blade: Nitro-V stainless steel 
Blade finish: Stonewashed
Handle: aluminum with iridescent blue anodized accents
Blade length: 73mm
Blade thickness: 3.2mm
Closed length: 103mm
Total length: 176 mm
Weight: 90 g
Lock: Liner lock
Clip: Removable, iridescent blue stainless steel
Packaging: Cardboard box with Böker Plus logos
Notes: Design by Joe Mangiafico

NiNi is the first lionSTEEL knife equipped with a Crossbar closure: a gentleman's pocket tool that combines elegance and everyday functionality. Refined, reliable, and built with the usual attention to detail.

The M390 steel blade with a satin finish is equipped with removable thumb studs, allowing the user to choose whether to open the knife using the studs or the nail nick. The Crossbar mechanism ensures safe opening and use in any situation: it consists of two parallel plates that move simultaneously, keeping the hole covered at all times to prevent dirt from entering the slot.

The handle, with its elegant and ergonomic lines, offers a comfortable grip and precise control. It is available in two versions: with a sandblasted titanium bolster or without a bolster, with longer scales that completely cover the polished stainless steel liners.

The reversible clip can be attached to the titanium spacer on either side using a Torx T6 screwdriver, making the NiNi a perfect EDC tool even for left-handed users.

Lightweight yet sturdy, it fits easily in your pocket and is the ideal companion for those who appreciate clean lines, craftsmanship, and classic design, combined with modern materials and technologies.

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Italy
Blade: M390 stainless steel
Blade treatment: Satin finish
Handle: Stainless steel liners, Santos wood handle, titanium guard and titanium spacer
Blade length: 68mm.
Blade thickness: 2.8mm.
Total length: 163mm.
Weight: 63g.
Closure: Crossbar Lock 
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with LionSteel logos
Notes: ball bearing opening system - thumb studs can be removed and the knife opened using only the “nail nick” hole on the back of the blade

NiNi is the first lionSTEEL knife equipped with a Crossbar lock: a gentleman's pocket tool that combines elegance and everyday functionality. Refined, reliable, and built with the usual attention to detail.

The M390 steel blade with a satin finish is equipped with removable thumb studs, allowing the user to choose whether to open the knife using the studs or the nail nick. The Crossbar mechanism ensures safe opening and use in any situation: it consists of two parallel plates that move simultaneously, keeping the hole covered at all times to prevent dirt from entering the slot.

The handle, with its elegant and ergonomic lines, offers a comfortable grip and precise control. It is available in two versions: with a sandblasted titanium bolster or without a bolster, with longer scales that completely cover the polished stainless steel liners.

The reversible clip can be attached to the titanium spacer on either side using a Torx T6 screwdriver, making the NiNi a perfect EDC tool even for left-handed users.

Lightweight yet sturdy, it fits easily in your pocket and is the ideal companion for those who appreciate clean lines, craftsmanship, and classic design, combined with modern materials and technologies.

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Italy
Blade: M390 stainless steel
Blade treatment: Satin finish
Handle: Stainless steel liners, Micarta handle and titanium spacer
Blade length: 68mm.
Blade thickness: 2.8mm.
Total length: 163mm.
Weight: 63g.
Closure: Crossbar Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with LionSteel logos
Notes: ball bearing opening system - thumb studs can be removed and the knife opened using only the “nail nick” hole on the back of the blade

For outdoor enthusiasts who prefer to carry a reliable folder for camping and survival, the 593BK P.S.K.™ is your Personal Survival Kit in a single sturdy and lightweight bushcrafting tool. Built with a textured gray G10 bolster and an OD green G10 handle that houses a strong, corrosion-resistant CPM-MagnaCut blade with a Cobalt Cerakote finish. The P.S.K. includes the quick and reliable AXIS Assist drive with integrated dorsal safety system and a dedicated groove at the base of the blade for starting a fire with a fire starter. If you are looking for a reliable companion for outdoor trips but don't want to be weighed down by sheaths or fixed blades, the 593BK P.S.K. is the perfect alternative for efficient, ambidextrous, one-handed use.

Intended use: Outdoor / Bushcraft

Type of production: Industrial
Country of manufacture: USA
Blade: Elmax stainless steel at 59/61HRC
Blade finish: Cerakote
Handle: Tempest Gray & Storm Gray Gryvory
Blade length: 87mm.
Blade thickness: 2.8mm.
Closed length: 125mm.
Total length: 213mm.
Closed thickness: 15.6mm
Weight: 127g.
Closure: Assis Axis Lock, with safety lock when opening and closing via slider on the back of the blade
Clip: Removable and reversible, stainless steel with Black Oxide finish
Packaging: Cardboard box with Benchmade logos
Notes: -

New version with Damax™ Damascus steel blade by Alleima, a new high-end industrial Damascus steel, obtained using an innovative technique that allows for the large-scale production of up to 135 layers of martensitic stainless steel. This material maintains the same quality and aesthetic appeal as handcrafted Damascus steel, but with an efficient, repeatable, and more accessible industrial process.

Production takes place in collaboration with Balbachdamast GmbH & Co. KG, a German company specializing in Damascus forging, creating the world's first industrial production of true Damascus steel. The new steel is suitable for multiple applications, from kitchen cutlery to outdoor cutlery.

Alleima, formerly Sandvik Materials Technology, is a global manufacturer of advanced stainless steels, special alloys, and industrial heating solutions, based in Sandviken (Sweden), with over 5,500 employees and customers in approximately 90 countries.

Intended use: Sports / Gentleman / Collection

Type of production: Industrial
Country of production: Italy
Blade: 120-layer Alleima Damax stainless Damascus steel
Blade finish: -
Handle: Beech burl
Blade length: 3.15 inches.
Blade thickness: 0.76 inches.
Closed length: 4.1 inches.
Total length: 7.2 inches.
Closed thickness: 0.5 inches.
Weight: 70g.
Opening: two-handed
Closure: slipjoint - simple spring
Clip: - 
Sheath: leather pocket case with Maserin logos
Packaging: Cardboard box with Maserin logos
Notes: Inspired by the “Marinera” knife, a typical vintage penknife from the city of Maniago

Intended use: EDC / sports

Type of production: Industrial
Country of production: Italy
Blade: Niolox stainless steel 59/61HRC
Blade finish: Black Top Shield
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 190mm.
Weight: 60g.
Closing mechanism: Back Lock
Clip: removable and reversible, stainless steel, flush
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: D2 tool steel
Blade treatment: Satin finish
Handle: Wood
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 210mm.
Weight: 151g.
Clip: black stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: -

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: D2 tool steel
Blade treatment: Blackwash PTFE
Handle: G10
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 210mm.
Weight: 151g.
Clip: black PTFE stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: -

One of the first lightweight folding knives with a carry clip, the Spyderco Delica® 4 is one of the brand's most popular and iconic models. In this special edition, the design is further enhanced by the use of exclusive CPM® SPY27® steel, developed in close collaboration with Crucible® Industries.

This is an advanced powder metallurgy steel that enhances the already high-performance formula of cobalt-enriched VG-10 by incorporating niobium, nitrogen, and higher amounts of carbon, molybdenum, and vanadium. The result is a material that offers an exceptional balance of edge retention, corrosion resistance, toughness, and ease of resharpening.

The PlainEdge™ full flat blade with a satin finish makes the most of these properties, while the FRN (glass-reinforced nylon fiber) handle, injection molded in the characteristic cobalt blue of the SPY27 line, ensures lightness and strength. The knife features a back lock mechanism and a four-position clip, configurable for tip-up or tip-down carry on either side.

Intended use: Sports

Type of production: industrial
Blade: CPM-SPY27 stainless steel
Blade finish: satin
Country of manufacture: Japan
Handle: FRN with stainless steel liners
Blade length: 74mm.
Blade thickness: 2.5mm.
Closed length: 108mm.
Total length: 181mm.
Weight: 68g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: cardboard case with Spyderco logos
Notes: -

The Dragonfly™ has been a staple in the Spyderco line for decades and continues to set the standard for those seeking exceptional cutting performance in a compact, four-finger grip format. This exclusive version features a blade made of CPM® SPY27®, a latest-generation steel developed in collaboration with Crucible® Industries and exclusive to Spyderco. An enhanced evolution of VG-10, enriched with cobalt, niobium, nitrogen, and higher amounts of carbon, molybdenum, and vanadium, it offers an extraordinary balance of edge retention, toughness, corrosion resistance, and ease of resharpening.

The PlainEdge™ blade with a flat edge and satin finish maximizes the qualities of this steel, while the FRN (glass-reinforced nylon fiber) handle, injection molded in the characteristic cobalt blue of the SPY27 family, ensures lightness and strength. The knife features a back lock mechanism and a reversible clip for deep carry, configurable on both sides in tip-up.

Intended use: Sports/EDC

Type of production: Industrial
Country of production: Japan
Blade: CPM-SPY27 stainless steel
Blade finish: Satin
Handle: FRN
Blade length: 58mm.
Blade thickness: 2.5mm.
Closed length: 85mm.
Overall length: 142mm.
Weight: 37g.
Lock: Back Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard case with Spyderco logos
Notes: -

Stylish elegance and effortless reliability as an expression of vibrant passion: the Boker Coffin with ULTEM handle by Chuck Gedraitis is more than just a knife, it is a vibrant blend of tradition and proven innovation — capable of stirring the hearts of enthusiasts.

The coffin-shaped design now takes on an ultra-modern character thanks to the ULTEM handle, a semi-transparent amber thermoplastic, characterized by its genuine and resistant material. This choice not only gives balance to the grip but also adds a casual and relaxed look, enhanced by an evocative internal luminosity.

The drop-point blade in powder metallurgical MagnaCut steel (62-63 HRC), with decorative ricasso, makes this knife the ideal tool for everyday use: from peeling an apple to cutting sturdy ropes, the slip-joint pocket knife moves through the EDC world with lightness, a trendy silhouette, and informal appeal.

The classic two-handed opening nail brings modernity to the details. The removable and reversible stainless steel clip maintains discretion as its main virtue, allowing for deep pocket carry that makes the knife almost disappear in your pants pocket. All this is accompanied by a high-quality felt case and Boker manufacturing in Solingen.

Intended use: EDC

Type of production: Industrial
Country of production: Germany
Blade: CPM-MagnaCut steel 62/63HRC
Blade finish: satin
Handle: Ultem
Blade length: 80mm.
Blade thickness: 2.5 mm.
Total length: 187 mm.
Weight: 55 g.
Closure: SlipJoint
Clip: stainless steel, deep pocket, removable and reversible
Packaging: Cardboard box with Boker Plus logos and felt case with zip
Notes: design by Chuck Gedraitis

Japanese Elegance in a Compact Form
The Executive is a folding knife that blends traditional Japanese aesthetics with a modern, minimalist design. Designed as a refined folding steak knife, it is the ideal accessory for those looking for an elegant and functional personal knife.

Manufactured in Seki, Japan, by Mcusta, this model combines modern technology and craftsmanship to offer custom knife quality in mass production. The Damascus blade with VG-10 steel core guarantees excellent performance, while the black anodized aluminum handles with black micarta inserts add a touch of class.
The innovative slipjoint mechanism offers progressive resistance with a closed blade lock, mid-stroke lock, and fully open lock.

Measuring 11.6 cm when closed, lightweight and slim, it comes with an elegant black leather pocket case.

Intended use: steak / food / sports

Type of production: MidTech
Country of production: Japan
Blade: laminated stainless Damascus steel with VG-10 cutting edge at 59/60HRC
Handle: Aluminum with black micarta inserts
Blade length: 93 mm.
Blade thickness: 3mm.
Closed length: 116mm.
Total length: 210mm.
Closed thickness: 13mm.
Weight: 58g.
Closure: Slip Joint
Sheath: leather pocket sheath
Packaging: cardboard box with Mcusta logos
Notes: -