Sport, Military and Collectible Knives | Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.

In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used and never removed from the sales box
* Available on the market: Out of production, limited edition of only 20 numbered pieces
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present
* Manuals, certificates, and warranties: Present
* Checked and certified by our in-house laboratory

Intended use: Tactical/light utility

Type of production: Industrial
Country of production: Italy
Blade: Full tang in N690Co 58HRC stainless steel
Blade treatment: Black PVD
Handle: G10
Blade length: 107mm.
Blade thickness: 4mm.
Total length: 230mm.
Balance: rearward
Weight: 195
Sheath: handmade vegetable-tanned leather, entirely handmade and hand-stitched
Packaging: wooden box with pyrographed logos
Notes: Limited edition of only 20 numbered pieces, on the blade, sheath, and wooden box - Knife previously purchased from a private collection - L.E.O. stands for Law Enforcement Only - designed by Tommaso Rumici

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: New, never used, no original box
* Commercially available: Still in catalog, but now offered without “9th Col Moschin” logos on the blade
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Scabbard: Present, new
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.

Commissioned and officially adopted in 2002 by the well-known 9th Incursor Rgt. “Col Moschin”, this model expresses the quintessence of the pure combat knife.

Inspired by the daggers with asymmetric blade and straight but oriented handle of the Arditi, from which the Regiment draws its vestiges, it has been reworked in a modern key. The center of gravity is strongly set back, the point particularly piercing. It is light, maneuverable and intuitive.

Every new raider gets one, every new raider is trained to use it to the fullest.

Intended use: Collector/Tactical/Military

Blade: N690Co 58HRC stainless steel with Desert Warfare finish
Handle: Forprene
Blade length: 160mm.
Blade thickness: 6.3mm.
Total length: 290mm.
Balance: set back, 1 cm. from the lower guard branch
Weight: 264g.
Sheath: Nylon, modular, thigh or belt, with removable inner plastic shell
Notes: previously purchased knife, from private collection

• Origin: Withdrawn from a private owner, previously purchased
• Condition: Overall in excellent condition
• Availability: Discontinued
• Sharpening: Original sharpening
• Blade marks: /
• Handle marks: Minor marks
• Box: /
• Sheath: /
• Manuals, Certificates, and Warranties: /
• Inspected and Certified: By our internal laboratory

The Extrema Ratio M.P.C. (Multi Purpose Compact) is an Italian-made folding knife designed to offer the durability of a fixed-blade knife in a compact and versatile format. Made with high-quality materials and precision techniques, it is ideal for tactical uses and field operations.

• Intended use: Tactical / Multi-role
• Production type: Industrial
• Country of origin: Italy
• Blade: Böhler N690 steel (58HRC)
• Blade finish: Testudo (brunished)
• Handle: Black anodized Anticorodal aluminum alloy
• Blade length: 113 mm
• Blade thickness: 6 mm
• Closed length: 149 mm
• Total length: 260 mm
• Closed thickness: 20 mm
• Weight: 240 g
• Locking system: Back lock with additional safety system
• Clip: Removable and reversible, brunished stainless steel
• Packaging: -
• Notes: The blade features partial serration for efficient cutting of cables and high-resistance fabrics.

The M.P.C. was developed to replace or complement a fixed-blade knife, combining the portability of a folder with the strength required for heavy-duty tasks. Its thick blade and robust locking system make it one of the most reliable tools in its category.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Overall in good condition.
* Commercially available: Still in catalog.
* Sharpening: Factory.
* Marks on blade: Marks and abrasions.
* Marks on handle: Small signs of wear and tear.
* Box: Present, not complete (absence of warranties and plastic bags).
* Scabbard: Present, in good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory.

Commissioned and officially adopted in 2002 by the renowned 9th Incursor Rgt. “Col Moschin,” this model expresses the quintessence of the pure combat knife. Inspired by the daggers with asymmetric blade and straight but oriented handle of the Arditi, from which the Regiment draws its vestiges, it has been reworked in a modern key. 

The center of gravity is strongly set back, the point particularly piercing. It is light, maneuverable and intuitive. Every new raider receives one, every new raider is trained to use it to the fullest.

Intended use: Collector/Tactical/Military

Blade: N690Co 58HRC stainless steel with Desert Warfare finish
Handle: Forprene
Blade length: 160mm.
Blade thickness: 6.3mm.
Total length: 290mm.
Balance: set back, 1 cm. from the lower guard branch
Weight: 264g.
Sheath: modular tactical, thigh or belt, Nylon
Notes: -

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Conditions: in like-new condition
* Available on the market: No longer available
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: /
* Manuals, Certificates and Guarantees: NO
* Checked and Certified by our internal laboratory

Designed by the well-known Danish designer Jesper Voxnaes, Odino is a high-end folding knife characterized by the frame lock architecture with a rotation system on bearings and the use of noble and technological materials (frame entirely in titanium and grip in carbon fiber, titanium or G-10). Vox's unique style, influenced by both Scandinavian design and American cutlery, the attention to detail and the excellence of Viper's typical workmanship create an absolutely original and high-level knife.

Intended use: Sporting/EDC

Type of production: Industrial
Blade production: Italy
Blade: Stainless steel N690Co 58/59HRC
Blade treatment: Stonewashed
Handle: Carbon Fiber and Titanium
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 100mm.
Total length: 184mm.
Closed thickness: -
Balance: -
Weight: 125g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available unique specimen from 2010.
* Sharpening: Original, improvable
* Marks on blade: /
* Marks on handle: /
* Packaging: /
* Scabbard: Leather, handcrafted, in good condition.
* Manuals, Certificates and Warranties: Certificate of Authenticity.
* Checked and Certified by our in-house laboratory.

FRANCO VERNAZZA is a hobbyist knifemaker and by passion a member of A.C.H.I. (Associazione Coltellinai Hobbisti Italiani), this does not take away from his excellent knifemaking skills. He himself says he makes blades for passion, knives that do the job of cutting, everything else is a detail. The workmanship, all unique because he doesn't use jigs, is really good, completely Hand Made in Italy. 

Intended use: hunting / collection

Type of production: handmade
Country of production: Italy
Blade: stainless steel N690Co
Blade finish: horizontal satin finish and mirror polish
Handle: Olive wood with anodized Titanium guard
Blade length: 135mm.
Blade thickness: 3.5mm.
Total length: 255mm.
Weight: 151g.
Sheath: leather, handcrafted, hand-stitched
Packaging: /
Notes: previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: In very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks above the opening hole, right side blade (see photo)
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Type of Production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Satin finish
Handle: Stainless steel and G10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 121mm.
Total length: 221mm.
Weight: 119g.
Closure: Liner Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: still in production.
* Sharpening: Professionally re-sharpened.
* Marks on blade: None
* Marks on handle: a few small marks on clip, hardware, and aluminum spacer
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: Tactical

Production type: Industrial
Country of Production: Italy
Blade: N690Co 58HRC steel with Grade 5 titanium back (49-50HRC)
Blade finish: stonewashed
Handle: G10
Blade length: 91mm.
Blade thickness: 5mm.
Length closed 127mm.
Total length: 216mm.
Thickness when closed: 25mm.
Balance: Backward, 3cm from the top of the guard.
Weight: 186g.
Latch: Liner Lock, with manual insertion safety
Clip: Stainless steel, reversible
Notes: previously purchased knife, withdrawn from private collection

In this new edition of the Defender FX-689, we have focused our attention on the blade, introducing an extraordinary 5 mm thick N690Co blade, which gives it particularly high strength. The handle features deep transverse grooves for an extremely secure grip.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: Microbead blasting
Handle: Walnut wood with through-guard and steel pommel
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 320mm.
Weight: 350g.
Sheath: leather
Packaging: cardboard box with Fox logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratory

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel N690Co hardened to 59/60 HRC
Blade finish: satin finish
Handle: Snakewood - 416 stainless steel guard and pommel
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 240mm.
Weight: 185g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from a private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 2014 knife overall in near new, unused condition, some minor marks on metal parts given by age
* Commercially available Discontinued.
* Sharpening: Factory sharpened, never used for cutting.
* Marks on blade: No
* Marks on handle: Some discoloration of laser engravings given by age.
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / Multirole

Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade Finish: Desert Warfare
Handle: Anticorodal with stainless steel spacer
Blade length: 115mm.
Blade thickness: 6.3mm.
Total length: 260mm.
Weight: 245g.
Lock system: Back Lock with additional safety pin
Packaging: cardboard box with Extrema Ratio logos
Notes: Previously purchased discontinued specimen from a private collection. Full set, in near-new condition

This special edition in 250 pieces, proposed on the occasion of the 25th anniversary of the brand, maintains the shape of the original, but with materials and finishes corresponding to the current production.

The K1 is equipped with a modified spear point profile blade, characterized by a tip that combines the 40° "tanto" profile with the more traditional European one, creating a sharp but very solid hybrid which, with the false false edge, makes it particularly effective in jab. The bevel is high, allowing for a very effective cutting angle.

The blade is immediately recognizable by the fenestration at the heel, which allows for considerable lightening without compromising its strength. It is made of Böhler N690 steel, with heat treatments that bring its hardness to 58 HRC for the best combination of edge hold and resistance. The finish is satin with flat grinding.

The handle, in anodized Anticorodal alloy, compared to the original presents the lightening on the sides that make the Extrema Ratio knives immediately distinguishable, but maintains the arched shape and the lateral "bellies" of the K1, offering an excellent grip both in the "saber" than in the "reverse" grip.

The terminal part of the handle curves to form a sort of hook which allows particularly easy and rapid extraction from the scabbard, while the tang protrudes from it with a triangular cusp which acts as a glass breaker with a slot which allows the knife to be equipped of lasso.

The leather scabbard faithfully reproduces the original while maintaining both the qualities of ease and speed of extraction. The carry can take place in an upside-down axillary position, horizontally on the belt or tactically on the thigh.

The K1 equipment is completed with a polypropylene case ‌, complete leather sheath and underarm shoulder strap.

WEIGHT g.: 493
WEIGHT OZ.: 17.39
BLADE LENGTH (MM): 210
BLADE LENGTH (IN): 8.26
TOTAL LENGTH (MM): 351
TOTAL LENGTH (IN): 13.81
BLADE THICKNESS (MM): 6.3
BLADE THICKNESS (IN): 0.25
BLADE MATERIAL: BÖHLER N690 STEEL (58HRC)
BLADE FINISH: SATIN
BLADE GRINDING: FLAT EDGE
HANDLE MATERIAL: ANODIZED ANTICORODAL ALUMINUM

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Typology: withdrawn by private individual
* Condition: in excellent condition
* Available on the market: discontinued since 2015
* Sharpening: factory sharpening
* Marks on the blade: small marks on the tip caused by the extraction from the sheath
* Marks on the handle: no marks
* Box: original Fox box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

ST3-F is a knife studied and designed by the head instructor Paolo Bozzo of TEAM SURVIVAL (survival and survival school).
This project was developed through years of direct experience in the field.

Intended use: Survival / Utlity

Type of production: Industrial
Production Lama: Italy
Blade: N690Co stainless steel
Blade treatment: Black Teflon
Handle: Green Canvas Micarta
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 360mm.
Balance: Advanced to 2.5cm. from the guard branch
Weight: 552g.
Sheath: in cordura with molle attachments
Packaging: cardboard box with Fox logos
Notes: designed by Paolo Bozzo

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Typology: withdrawn by private individual
* Condition: in like new condition
* Commercially available: discontinued from 2021
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: without box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Tactical

Type of production: Industrial
Production Lama: Italy
Blade: N690Co stainless steel
Blade Treatment: Titanium Nitriding
Handle: Forprene
Blade length: 135mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 275mm.
Thick when closed: -
Balancing: -
Weight: 280g.
Closure: -
Clip: -
Sheath: Kydex and Cordura
Packaging: -
Note: -

The Buck 124 was originally designed in 1966 as a dive combat knife called the Nemo. The model then went into production in 1967 and was offered with either a dive sheath (NEMO) or a leather sheath (FRONTIERSMAN). The knife was the same and has remained so to this day.

In the 1960s about 300 examples were produced and they had black phenolic handles with white Teflon spacers. Then in the 1970s it had a fluctuating production, with very poor sales numbers, until in '73 it was offered with a "Buckarta" (Micarta) handle and began to find favor with the public, with over 10000 examples sold until the early 1980s. Until 1983 model production remained high, and in 1984 a version of the FRONTIERSMAN with a Pakkawood handle was introduced; the 1984 version did not have the patent logos engraved, the 1985 version had the patent engravings, and from 1986 the knife began to have the production date engraved on the blade.

Therefore, our proposed model is from 1984.

Knife withdrawn from private collection - Classic Buck model dating from 1984, first series with wooden handle - Overall in very good condition, with no particular noticeable marks, with a few small scratches on aluminum guard and pommel - Scabbard in excellent condition - Original factory sharpening, but underperforming - Lacking box and certificates - Checked and certified by our in-house laboratory.

Intended Use: Hunting / Utility / Multirole / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, 425M stainless steel
Blade finish: satin-finished
Handle: Pakkawood
Blade length: 159mm.
Blade thickness: 4.5mm.
Total length: 300mm.
Balance: backward
Weight: 377g.
Sheath: black leather
Packaging: absent
Notes: knife withdrawn from private collection, 1984 specimen, overall in very good condition

Knife withdrawn from private collection, dates from the very first production in 1984 (in fact, it does not indicate the patent engravings, affixed in 1985 and does not indicate the production date, affixed only from 1986). Globally in good condition, it has marks on the blade and handle due to the normal passage of time and the very aggressive scabbard which, containing a spring-loaded metal foil, irreparably scratches the blade both in insertion and extraction - It still has the factory sharpening and comes with a compass in the tang and two harpoons already engaged on the guard branch; lacking instead the box and additional accessories - Checked and certified by our in-house laboratory.

Intended Use: Sporting / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: knife made entirely of 425M stainless steel
Blade finish: satin-finished
Handle: hollow, stainless steel, with rear screw cap
Blade length: 185mm.
Blade thickness: 7.5mm.
Total length: 315mm.
Balance: set back from the guard branch
Weight: 675g.
Scabbard: black ABS
Notes: The feature, patented, is the presence of two removable screw-on harpoons/hooks. The function of these is simple anchorage. In fact, this knife can be used as a throwing hook by attaching a rope to the ring on the pommel. The manufacturer guarantees a harpoon hold of up to 600 pounds. The Navy Seals, specifically, had requested a knife that could be used underwater in order to anchor the vehicles to an underwater attachment point, and that is the reason for the total steel construction.

Intended use: Collection / Outdoor

Blade: Full tang in stainless steel N680 at 57 / 58HRC
Handle: In metal
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 295mm.
Weight: 367g.
Sheath: in polymers and cordura with the following accessories:

* Skinner
* Sharpening stone
* survival kit includes:
- Fishing kit
- Sewing kit
- Scalpel
- Seasonings
- Tweezers

Packaging: cardboard with Aitor logos

Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox

Intended use: Sports

Type of production: Industrial
Country of production: Italy
Blade: N690Co 59 / 60HRC stainless steel
Blade treatment: Black Idroglider
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper Voxnaes

Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox

Intended use: Sports
Type of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690Co 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper Voxnaes

Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox

Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Stonewash
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper Voxnaes

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58 / 59HRC
Blade finish: Satin finish
Handle: G10 with stainless steel internal folders and G10 spacer
Blade length: 75mm.
Blade thickness: 3.5mm.
Length closed: 103mm.
Total length: 178mm.
Thick when closed: 14.2mm.
Weight: 95g.
Closure: Liner Lock
Clip: stainless steel, machined from solid
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

Intended use: hunting / sporting

Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel N690Co 58 / 60HRC
Blade treatment: Stonewashed
Handle: G10
Blade length: 88mm.
Blade thickness: 3.8mm.
Total length: 200mm.
Balancing: -
Weight: 115g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Jesper Voxnaes

Intended use: Survival / utlity

Type of production: Industrial
Production Country: Italy
Blade: Stainless Steel N690Co
Blade treatment: Black Idroglider
Handle: Forprene
Blade length: 190mm.
Blade thickness: 5mm.
Overall length: 320mm.
Balancing: Advanced to 3cm. by guard branch
Weight: 370g.
Sheath: Nylon
Packaging: cardboard box with Fox logos
Notes: designed and developed in collaboration with Alfredo Doricchi

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy - Maniago (PN)
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Satin
Grip: G10 with steel liners
Blade length: 84mm.
Blade thickness: 3.4mm.
Length closed: 116mm.
Total length: 200mm.
Weight: 155g.
Closure: Back Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Fox FKMD logos
Notes: Skull Detachable tapered crasher placed on the shank

Intended use: Tactical / Light Utility
Type of production: Industrial
Country of production: Maniago - Italy
Blade: full tang in stainless steel N690Co 58HRC
Blade treatment: Stonewashed
Handle: G10
Blade length: 107mm.
Blade thickness: 4mm.
Total length: 230mm.
Balancing: set back
Weight: 195
Sheath: in Kydex, by Radar
Packaging: cardboard box with Maserin logos
Notes: L.E.O. is the acronym of Law Enforcement Only - designed by Tommaso Rumici

Intended use: Tactical / Light Utility
Type of production: Industrial
Country of production: Maniago - Italy
Blade: full tang in stainless steel N690Co 58HRC
Blade treatment: Stonewashed
Handle: G10
Blade length: 107mm.
Blade thickness: 4mm.
Total length: 230mm.
Balancing: set back
Weight: 195
Sheath: in Kydex, by Radar
Packaging: cardboard box with Maserin logos
Notes: L.E.O. is the acronym of Law Enforcement Only - designed by Tommaso Rumici

Viper - Kyomi by Vox - Titanium and G10 Orange - V5940GO - knife

Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Titanium and Green G10
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 107mm.
Overall length: 184mm.
Thick when closed: 18mm.
Balancing: -
Weight: 128g.
Closure: Frame Lock with steel swing
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper Voxnaes

intended use: sports / EDC

Type of production: Industrial
Production Country: Italy
Blade: N690 stainless steel
Blade Treatment: satin finish
Handle: FRN Fiberglass Reinforced Nylon
Blade length: 81mm.
Blade thickness: 3 mm.
Closed Length: 128mm.
Overall length: 182mm.
Thickness when closed: 11mm
Weight: 52g.
Closure: Slipjoint - lock free
Clip: absent
Sheath: Leather pocket
Packaging: cardboard box with Fox Knives logos
Notes: Design by Bastinelli Knives

Intended use: Sports / Tactical

Type of production: Industrial
Production Country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Surface treatment: Blackwash
Handle: Titanium bronzed
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 225mm.
Thick when closed: 14.5mm
Weight: 180g.
Closing: Framelock
Clip: Removable, stainless steel
Packaging: cardboard box with Fox Knives logos
Notes: Design by Rob Walker

Intended use: Survival / utlity

Type of production: Industrial
Production Country: Italy
Blade: Stainless Steel N690Co 58/60 HRC
Blade treatment: Satin finish
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5mm.
Overall length: 310mm.
Balancing: Advanced to 2cm. by guard branch
Weight: 330g.
Sheath: Nylon, from thigh
Packaging: cardboard box with Fox logos
Notes: -

Intended use: Sports

Type of production: Industrial
Production Country: Italy
Blade: full tang stainless steel N690Co
Blade treatment: Satin finish
Handle: Cocobolo
Blade length: 110mm.
Blade thickness: 4mm.
Overall length: 220mm.
Balancing: -
Weight: 140g.
Sheath: Leather
Packaging: cardboard box with Fox logos
Notes: design by Jesper Voxnaes

Intended use: Sports

Type of production: Industrial
Production Country: Italy
Blade: full tang stainless steel N690Co
Blade treatment: Satin finish
Handle: G10
Blade length: 110mm.
Blade thickness: 4mm.
Overall length: 220mm.
Balancing: -
Weight: 160g.
Sheath: Leather
Packaging: cardboard box with Fox logos
Notes: design by Jesper Voxnaes

Intended use: Survival / utlity

Type of production: Industrial
Production Country: Italy
Blade: Stainless Steel N690Co
Blade treatment: Satin finish
Handle: Forprene
Blade length: 190mm.
Blade thickness: 5mm.
Overall length: 320mm.
Balancing: Advanced to 3cm. by guard branch
Weight: 370g.
Sheath: Nylon
Packaging: cardboard box with Fox logos
Notes: designed and developed in collaboration with Alfredo Doricchi

The Resolza is the typical Sardinian folding knife, called improperly "Pattada" from the name of the village in the province of Sassari which is the production center. Extrema Ratio wanted to pay homage to the most famous knife of the Italian tradition by blending its original shape and traditional, with the techniques and the most advanced materials.

Intended use: Sports

Type of production: Industrial
Blade: N690Co 58HRC stainless steel
Production Country: Italy
Handle: Anticorodal
Blade length: 79mm.
Blade Thickness: 3mm.
closed length: -mm.
Overall length: 173mm.
Weight: 36g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

The Resolza is the typical Sardinian folding knife, called improperly "Pattada" from the name of the village in the province of Sassari which is the production center. Extrema Ratio wanted to pay homage to the most famous knife of the Italian tradition by blending its original shape and traditional, with the techniques and the most advanced materials.

Intended use: Sports

Type of production: Industrial
Blade: N690Co 58HRC stainless steel
Production Country: Italy
Handle: Anticorodal
Blade length: 79mm.
Blade Thickness: 3mm.
closed length: -mm.
Overall length: 173mm.
Weight: 36g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

Commissioned and officially adopted in 2002 by the famous 9th Regiment. Raiders "Col Moschin", this model expresses the quintessence of pure combat knife.

Inspired by daggers with asymmetric blade and straight handle but oriented Arditi, from which the Regiment traces its vestiges, it was reworked in a modern way.
The center of gravity is strong backlog, particularly the tip piercing. And 'light, handy and intuitive. Each new intruder receives one, and each new intruder is trained to use it.

All knives of this series have straight handles KRATON from ergonomic design whose shape and size favors besides a solid grip the rapid change of straight handle (Sabre Grip) to upside (Reverse Grip). An Allen screw stainless steel allows the campaign from disassembly for maintenance and lubrication of the through shank increasing the operational life of the knife.

The sheath and 'suitable all'aviolancio and underwater operations and amphibious and is' applicable to the belt or the accoutrements.

Intended Use: Collection / Tactical / Military

Production Country: Italy
Blade: N690Co 58HRC stainless steel
Surface treatment: Black PVD
Handle: Removable Kraton
Blade length: 160mm.
Blade Thickness: 6.3mm.
Overall length: 290mm.
Balancing: backward, 1 cm. the branch of the lower guard
Weight: 265g.
Sheath: tactical modular, from thigh or belt, Nylon
Notes: Limited Edition with exhibitor in Plexyglass

Viper - Kyomi by Vox - Titanium and Carbon Fiber - V5934FC - knife

Intended use: Sport / EDC
Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Titanium and Carbon fiber
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 107mm.
Overall length: 184mm.
Thick when closed: 18mm.
Balancing: -
Weight: 120g.
Closure: Frame Lock with steel swing
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper Voxnaes

Viper - Kyomi by Vox - Titanium and G10 Orange - V5940GO - knife

Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Titanium and Orange G10
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 107mm.
Overall length: 184mm.
Thick when closed: 18mm.
Balancing: -
Weight: 128g.
Closure: Frame Lock with steel swing
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper Voxnaes