Sport, Military and Collectible Knives | Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Like new; 2020 model with serial number #406, never removed from its original packaging
* Commercial Availability: Discontinued in this steel and finish configuration
* Sharpening: Factory-sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Included
* Sheath: Included
* Manuals, Certificates, and Warranties: Included
* Inspected and certified by our in-house laboratory

The Rockstead brand, from Ishida Co. in Sakai, Japan, currently markets the finest industrial knives in production today.

Created by Katsumi Kitano—who has been crafting high-quality knives for over 20 years and has been awarded the highest honor among artisan knife makers in Japan—these knives demonstrate exceptional performance in cutting ability, penetration, and edge retention, as well as innovation in the materials used and construction techniques.

Intended Use: Collectible / Sporting

Production type: Industrial
Country of manufacture: Japan
Blade: Hitachi YXR7 steel at 64.7 HRC
Blade treatment: 3-micron HPC coating - Hv1800
Handle: A2024 duralumin with Hv400 anodized finish and stingray leather
Blade length: 82 mm.
Blade thickness: 4 mm.
Overall length: 189 mm.
Weight: 100 g.
Closure: Liner Lock made of 402J2 steel at 52 HRC
Clip: 402J2 steel at 48 HRC with HPC coating
Packaging: Wooden box with a cardboard outer box featuring the manufacturer’s logos, warranty certificates with the date of manufacture, a complete technical data sheet, and the knife’s serial numbers
Notes: Previously owned knife from a private collection

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private seller, previously purchased
* Condition: Like new, never removed from its box
* Commercial Availability: Discontinued and limited edition, with only 350 units produced
* Sharpness: Factory-sharpened
* Marks on Blade: None
* Marks on Handle: None
* Box: Included
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The master swordsmiths of the past knew it well: the perfect blade is born from the combination of different steels, each chosen for its specific properties. This is the secret behind the legendary samurai swords, and it is now at the heart of Kershaw’s Composite Blade technology.

Designed by renowned designer Ken Onion, the Kershaw Tyrade KS1850TAN fuses two high-quality steels into a single high-performance blade: a 154CM stainless steel spine—an extremely robust alloy originally developed for jet engines, ensuring maximum resilience—and a CPM-D2 edge: ideal for precision cuts, excellent edge retention, and outstanding corrosion resistance.

The knife combines this advanced technology with an ergonomic G-10 handle, designed to provide a firm and secure grip in all conditions. Opening is quick, smooth, and ambidextrous thanks to the patented SpeedSafe assisted flipper system, while the Liner Lock blade lock ensures maximum safety during use.

A limited-edition model with only 350 pieces worldwide, entirely manufactured in the USA, designed for collectors and enthusiasts who demand the very best in terms of style, functionality, and technological innovation.

Intended Use: Sports

Production Type: Industrial
Country of Manufacture: USA
Blade: Composite with a 154CM stainless steel spine and a CPM-D2 sintered carbon steel cutting edge
Blade Finish: Micro-bead blasting
Handle: G10 with stainless steel inlays
Blade Length: 93mm.
Blade thickness: 3.5 mm.
Closed length: 128 mm.
Overall length: 220 mm.
Weight: 199 g.
Lock: LinerLock
Clip: Removable stainless steel
Packaging: Cardboard box with Kershaw logos
Notes: Designed by Ken Onion - SpeedSafe assisted opening system

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual; previously purchased and used
* Condition: Mechanically in excellent condition; cosmetically in acceptable condition; shows several signs of use on the blade finish, liners, and handle that do not compromise its use in any way
* Commercially available: Discontinued
* Sharpness: Factory-sharpened; could be improved
* Marks on blade: Several signs of use and wear
* Marks on handle: Several signs of use and wear
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

The Alpha Three model, an evolution of the Alpha Two, was designed by Dietmar Pohl in collaboration with police and special forces instructors from the H3 Training Division. This knife is engineered for heavy-duty use; thanks to its substantial size, it is well-suited for use while wearing gloves.

Intended Use: Utility / Multi-purpose
Manufacturing Type: Industrial
Blade: D2 steel
Blade Finish: Burnished
Handle: Zytel with internal burnished stainless steel liners
Blade Length: 113 mm
Blade Thickness: 5 mm
Overall Length: 260 mm
Thickness when closed: 18 mm
Balance: 1 cm rearward from the guard
Weight: 260 g
Closure: Back Lock
Packaging: -
Notes: equipped with a skull crusher / glass breaker on the back—knife previously purchased and used, from a private collection

KNIFE ACQUIRED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Mechanically in excellent condition; cosmetically in good condition. Shows minor scuffs on the G10 handle due to the passage of time and limited use of the knife.
* Availability on the market: Knife from 2000, discontinued, particularly rare
* Sharpening: Professionally resharpened by the previous owner
* Marks on blade: Minor cosmetic abrasions caused by age and use of the knife, albeit limited
* Marks on handle: A few minor marks caused by age and use of the knife, albeit limited
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

Intended use: Tactical/Military

Manufacturing type: Industrial
Blade: 154CM stainless steel
Blade finish: Titanium nitriding
Country of manufacture: USA
Handle: G-10 with titanium inlays
Blade length: 90 mm.
Blade thickness: 3 mm.
Closed length: 125 mm.
Overall length: 213 mm.
Weight: 128 g.
Closure: Liner Lock
Clip: burnished stainless steel, removable
Notes: Knife from 2000, discontinued, previously purchased, from a private collection

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: In excellent mechanical condition and in acceptable cosmetic condition, which does not limit its practical use
* Commercially available: Discontinued
* Sharpness: Factory-sharpened
* Marks on blade: Various cosmetic marks from use and aging
* Marks on handle: Various cosmetic marks from use and aging
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

Intended use: Multipurpose emergency and survival knife

Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co stainless steel
Finish: Burnished
Handle: Anodized Anticorodal aluminum alloy
Blade length: 85 mm.
Blade thickness: 2.5 mm.
Overall length: 210 mm.
Weight: 212 g.
Locking system: Liner Lock on the blade and wood saw; push-button lock on the cable cutter / belt cutter
Packaging: Cardboard box with Extrema Ratio logos and manufacturer’s certificates
Notes: Quick-release emergency cable/belt cutter blade  - stainless steel glass breaker - wood saw - 2013 model, now discontinued - previously purchased knife from a private collection

The Corner is an EDC (Every Day Carry) folding knife designed to accompany the user in their daily activities, offering practicality, reliability, and a modern design with attention to detail.

Compact and easy to carry, it’s ideal for those looking for a versatile knife to always have on hand, suitable for both urban use and outdoor activities. Its quick and intuitive opening mechanism makes it simple and immediate to use, while its compact size makes it comfortable to carry in a pocket.

The stonewashed blade and Micarta handle give The Corner an elegant and durable look, striking a balance between style, functionality, and a comfortable grip.

Designed in Italy, The Corner offers a practical and affordable solution for those seeking a reliable, well-crafted EDC knife ready to meet everyday needs.

Intended Use: EDC / Sports

Production Type: Industrial
Country of Manufacture: China
Blade: 10Cr15CoMoV stainless steel (Asian alloy similar to Japanese VG-10)
Blade Finish: Stonewashed
Handle: Ziricote wood
Blade Length: 70 mm
Blade thickness: 3 mm
Closed length: 100 mm
Overall length: 170 mm
Weight: 100 g
Lock type: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with manufacturer’s logos
Notes: Flipper-style opening mechanism on ball bearings

The Corner is an EDC (Every Day Carry) folding knife designed to accompany the user in their daily activities, offering practicality, reliability, and a modern design with attention to detail.

Compact and easy to carry, it’s ideal for those looking for a versatile knife to always have on hand, suitable for both urban use and outdoor activities. Its quick and intuitive opening mechanism makes it simple and immediate to use, while its compact size makes it comfortable to carry in a pocket.

The stonewashed blade and Micarta handle give The Corner an elegant and durable look, striking a balance between style, functionality, and a comfortable grip.

Designed in Italy, The Corner offers a practical and affordable solution for those seeking a reliable, well-crafted EDC knife ready to handle everyday demands.

Intended Use: EDC / Sports

Production Type: Industrial
Country of Manufacture: China
Blade: 10Cr15CoMoV stainless steel (Asian alloy similar to Japanese VG-10)
Blade Finish: Stonewashed
Handle: Micarta
Blade Length: 70 mm
Blade thickness: 3 mm
Closed length: 100 mm
Overall length: 170 mm
Weight: 100 g
Lock type: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with manufacturer’s logos
Notes: Flipper-style opening mechanism on ball bearings

PUFFY is an EDC (Every Day Carry) folding knife designed to offer practicality, reliability, and excellent value for the price. Designed to accompany the user in daily activities, it combines a modern and functional design with smooth, user-friendly mechanics.

The one-handed opening via a hole in the blade allows for quick and intuitive use, while the ball-bearing rotation system ensures a smooth and precise slide. Compact, lightweight, and easy to carry, it is the ideal companion for everyday needs, from urban use to outdoor activities.

Designed in Italy, the PUFFY is a smart solution for those who want a versatile, well-crafted, and affordable knife without compromising on build quality and functionality.

Intended Use: EDC / Sports

Production Type: Industrial
Country of Manufacture: China
Blade: 10Cr15CoMoV stainless steel (Asian alloy similar to Japanese VG-10)
Blade Finish: Stonewashed Black Idroglider
Handle: G10
Blade Length: 70 mm
Blade thickness: 3 mm
Closed length: 103 mm
Overall length: 160 mm
Weight: 105 g
Lock type: Liner Lock
Clip: Removable and reversible, made of stainless steel with black PTFE coating
Packaging: Cardboard box with manufacturer’s logos
Notes: Opening mechanism features ball bearings.

PUFFY is an EDC (Every Day Carry) folding knife designed to offer practicality, reliability, and excellent value for the price. Designed to accompany the user in daily activities, it combines a modern and functional design with smooth, user-friendly mechanics.

The one-handed opening via a hole in the blade allows for quick and intuitive use, while the ball-bearing rotation system ensures a smooth and precise slide. Compact, lightweight, and easy to carry, it is the ideal companion for everyday needs, from urban use to outdoor activities.

Designed in Italy, the PUFFY is a smart solution for those who want a versatile, well-crafted, and affordable knife without compromising on build quality and functionality.

Intended Use: EDC / Sports

Production Type: Industrial
Country of Manufacture: China
Blade: 10Cr15CoMoV stainless steel (Asian alloy similar to Japanese VG-10)
Blade Finish: Stonewashed
Handle: G10
Blade Length: 70 mm
Blade thickness: 3 mm
Closed length: 103 mm
Overall length: 160 mm
Weight: 105 g
Lock type: Liner Lock
Clip: Removable and reversible, made of stainless steel with black PTFE coating
Packaging: Cardboard box with manufacturer’s logos
Notes: Opening mechanism features ball bearings.

PUFFY is an EDC (Every Day Carry) folding knife designed to offer practicality, reliability, and excellent value for the price. Designed to accompany the user in daily activities, it combines a modern and functional design with smooth, user-friendly mechanics.

The one-handed opening via a hole in the blade allows for quick and intuitive use, while the ball-bearing rotation system ensures a smooth and precise slide. Compact, lightweight, and easy to carry, it is the ideal companion for everyday needs, from urban use to outdoor activities.

Designed in Italy, the PUFFY is a smart solution for those who want a versatile, well-crafted, and affordable knife without compromising on build quality and functionality.

Intended Use: EDC / Sports

Production Type: Industrial
Country of Manufacture: China
Blade: 10Cr15CoMoV stainless steel (Asian alloy similar to Japanese VG-10)
Blade Finish: Satin
Handle: Micarta
Blade Length: 70 mm
Blade thickness: 3 mm
Closed length: 103 mm
Overall length: 160 mm
Weight: 100 g
Lock type: Liner Lock
Clip: Removable and reversible, made of stainless steel with black PTFE coating
Packaging: Cardboard box with manufacturer’s logos
Notes: Opening mechanism features ball bearings.

Inspired by the dark and fascinating figure from Greek mythology, the Echidna represents the convergence of primordial strength, mystery, and modern design. A hybrid creature with the features of a woman and a serpent, Echidna was considered the progenitor of some of antiquity’s most famous monsters, including the Hydra and Cerberus. From this inspiration comes the Boker Plus Echidna, a knife designed by French designer Raphaël Durand, capable of transforming mythological allure into a functional and contemporary object.

The model embodies the distinctive aesthetic language of the Durand series, featuring an ergonomically shaped handle with pronounced finger grooves, crafted from a sturdy yet lightweight GRN/TPE composite that ensures a secure grip even during prolonged use. The design is complemented by a reliable back lock mechanism and a lanyard hole, offering various carrying options.

The drop-point blade, crafted from D2 steel with a satin finish, combines excellent cutting performance, wear resistance, and reliability for everyday use. Without any assisted-opening mechanisms, the Echidna emphasizes simple construction and pure functionality, while maintaining a bold and unmistakable character.

A compact, practical knife full of personality, supplied complete with a high-quality nylon sheath for safe and versatile carrying.

Intended Use: Sports / Light Utility

Production Type: Industrial
Country of Manufacture: China
Blade: D2 steel
Blade Finish: Satin
Handle: GRN / Ultralight TPE
Blade length: 93 mm.
Blade thickness: 3.8 mm.
Overall length: 226 mm.
Weight: 117 g.
Sheath: Nylon, belt-mounted
Lock: Back Lock
Packaging: Cardboard box with Boker Plus logos
Notes: Designed by Raphaël Durand

“Vas-y, Kazy!” — a bold call to action that captures the spirit of the new Boker Plus Kazy, designed by French designer and blacksmith Gabriel Berthelemy of La Forge Agab. A compact EDC folding knife, designed for everyday use, that combines a distinctive tactical aesthetic with functional and reliable technical solutions.

The Boker Plus Kazy stands out for its characteristic Harpoon-style blade—a hallmark of the designer’s work—featuring a unique two-tone finish. The black oxide coating protects the blade from scratches and reduces unwanted glare, giving the knife a discreet and professional appearance. Made of Nitro-V steel, the blade offers an excellent balance between edge retention, corrosion resistance, and ease of resharpening, making it suitable for the most common daily activities.

One-handed opening is quick and smooth thanks to the ball-bearing front flipper system and the pronounced blade heel. The robust liner lock ensures a secure lock while maintaining a clean, slim profile. The Coyote Tan G10 scales provide an ergonomic and stable grip even under demanding conditions.

Complete with a tip-up clip for deep, discreet pocket carry, the Boker Plus Kazy is a tactical EDC knife featuring a bold and functional design, ideal for those seeking a reliable companion for daily activities with a unique aesthetic identity.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: China
Blade: Nitro-V stainless steel
Blade Finish: Dual Tone – Black Oxide and Satin Finish
Handle: G10
Blade Length: 67mm.
Blade thickness: 3.2 mm.
Overall length: 165 mm.
Weight: 69 g.
Clip: Stainless steel, removable
Lock: Liner Lock
Packaging: Cardboard box with Boker Plus logos
Notes: Front flipper opening system with ball bearings

Compact, futuristic, designed for those looking for something different from the usual. The Mercury ANUBI SWPS is a knife from the Hi-Tech series, a collection that reinterprets modern EDC through futuristic shapes, advanced technical solutions, and a distinctly contemporary aesthetic. Designed by Denis Simonutti, ANUBI combines innovation and functionality in a compact, high-performance design.

The ELMAX sintered steel blade, with a stonewash finish, offers excellent wear resistance, superior edge retention, and long-lasting reliability. The front flipper opening system, featuring ball-bearing rotation, ensures a smooth, precise, and safe motion—ideal for everyday EDC use.

The black aluminum handle gives ANUBI a bold, high-tech character, combining lightness, sturdiness, and a sense of solidity typical of the most advanced industrial materials. The sculpted contours, dark finish, and compact proportions enhance its futuristic style, making it an elegant and distinctive EDC knife.

Intended Use: EDC / Sports

Manufacturing Type: Industrial
Country of Manufacture: Italy
Blade: Elmax stainless steel
Blade Finish: Stonewashed
Handle: Matte black anodized 6060 aluminum
Blade Length: 85 mm.
Blade thickness: 3 mm.
Closed length: 115 mm.
Overall length: 195 mm.
Weight: 86 g.
Closure: Liner Lock
Clip: Stonewashed stainless steel, removable
Packaging: Cardboard box with Mercury logos
Notes: Opens on ball bearings via a front flipper system

Compact, futuristic, designed for those looking for something different from the usual. The Mercury ANUBI SWPS is a knife from the Hi-Tech series, a collection that reinterprets modern EDC through futuristic shapes, advanced technical solutions, and a distinctly contemporary aesthetic. Designed by Denis Simonutti, ANUBI combines innovation and functionality in a compact, high-performance format.

The ELMAX sintered steel blade, with a stonewash finish, offers excellent wear resistance, superior edge retention, and long-lasting reliability. The front flipper opening system, featuring ball-bearing rotation, ensures a smooth, precise, and safe motion ideal for daily EDC use.

The brown Paperstone handle gives the knife a unique character, combining lightness, sturdiness, and a pleasant feel to the touch. The sculpted lines, compact proportions, and futuristic design make ANUBI a technical and distinctive piece, designed for those who appreciate advanced materials and unconventional design solutions.

Intended Use: EDC / Sports

Production Type: Industrial
Country of Manufacture: Italy
Blade: Elmax stainless steel
Blade Finish: Stonewashed
Handle: Paperstone
Blade Length: 85 mm.
Blade thickness: 3 mm.
Closed length: 115 mm.
Overall length: 195 mm.
Weight: 72 g.
Closure: Liner Lock
Clip: Stonewashed stainless steel, removable
Packaging: Cardboard box with Mercury logos
Notes: Opens on ball bearings via a front flipper system

The Fox Spora mushroom picking knife was designed specifically to handle the delicate nature of mushroom stems, thereby making the harvesting process easier.

With its specially designed blade, it allows for a precise cut of the stems without damaging the mycelium—the delicate, root-like fibers from which a new mushroom can grow. Additionally, the retractable brush makes it easy to clean debris from the mushroom before storing it.

The attractive design and carrying clip make the knife practical and always ready for use during mushroom foraging trips.

Intended Use: Mushroom Knife

Country of Manufacture: Italy
Blade: Sandvik 12C27 stainless steel
Handle: deer antler
Blade Length: 65 mm.
Blade thickness: 3 mm.
Closed length: 110 mm.
Overall length: 175 mm.
Weight: 119 g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: Retractable nylon brush - Design by Riccardo Gobbato / Raven Knives Design

KNIFE PREVIOUSLY PURCHASED AND USED, FROM A PRIVATE COLLECTION
* Origin: Purchased from a private individual, previously owned and used
* Condition: Excellent mechanical condition, good cosmetic condition (a few small marks on the aluminum handle and a few small spots of oxidation on the blade)
* Commercially available: Available on the market
* Sharpening: Professionally resharpened
* Marks on blade: Small spots of oxidation and minimal polishing of the blade’s finish due to use
* Marks on the handle: 2–3 small scuffs on the aluminum handle
* Box: Included
* Sheath: -
* Manuals, Certificates, and Warranties: Included
* Inspected and certified by our in-house laboratory

The BF2 is a “full-size” folding knife particularly suited for professional use by military and law enforcement personnel in the field. The handle is sturdy and comfortable; the reversible, wraparound clip serves as a useful and comfortable thumb rest in the “reverse grip” position. The handle scale is solid with the characteristic recessed surfaces designed to engage the opening pins without them protruding from the knife’s closed profile. The blade, available in either a drop-point or tanto configuration, features a flat grind and, like the BF1, a particularly thick and durable tip. The blade locking mechanism is the proven LINER-LOCK, supplemented by a manually operated safety mechanism protected by a guard. 

Intended Use: Tactical/Military

Production Type: Industrial
Blade: N690Co stainless steel, 58 HRC
Country of Manufacture: Italy
Handle: Anticorodal
Blade Length: 90 mm.
Blade thickness: 3 mm.
Closed length: 124 mm.
Overall length: 210 mm.
Weight: 142 g.
Closure: Liner Lock with additional safety lock operable when the knife is open
Clip: Reversible and removable stainless steel clip
Notes: Previously owned and used knife, from a private collection

With thirty years of experience in designing professional knives, Extrema Ratio has developed a model designed for those seeking an everyday carry tool that combines functionality, lightness, and attention to detail.

The minimalist profile, clean lines, and light weight are not merely aesthetic choices for their own sake, but the result of a design focused on efficiency. Every element serves a specific purpose. Nothing has been added merely to impress; nothing is there without a reason.

AERO is built using materials selected to ensure reliability in daily use and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade, prized for its corrosion resistance, edge retention, and ease of resharpening.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Nitrogen steel
Blade Finish: MIL-C-13924 burnishing
Handle: Stainless steel scales with anodized anticorodal aluminum grip
Blade Length: 69mm.
Blade thickness: 2.3 mm.
Overall length: 173 mm.
Weight: 92 g.
Lock type: Liner Lock
Clip: -
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

With thirty years of experience in designing professional knives, Extrema Ratio has developed a model designed for those seeking an everyday carry tool that combines functionality, lightness, and attention to detail.

The minimalist profile, clean lines, and light weight are not merely aesthetic choices for their own sake, but the result of a design focused on efficiency. Every element serves a specific purpose. Nothing has been added merely to impress; nothing is there without a reason.

AERO is built using materials selected to ensure reliability in daily use and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade, prized for its corrosion resistance, edge retention, and ease of resharpening.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Nitrogen steel
Blade Finish: MIL-C-13924 burnishing
Handle: Stainless steel scales with anodized anticorodal aluminum grip
Blade Length: 69mm.
Blade thickness: 2.3 mm.
Overall length: 173 mm.
Weight: 92 g.
Lock type: Liner Lock
Clip: -
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

With thirty years of experience in designing professional knives, Extrema Ratio has developed a model designed for those seeking an everyday carry tool that combines functionality, lightness, and attention to detail.

The minimalist profile, clean lines, and light weight are not merely aesthetic choices for their own sake, but the result of a design focused on efficiency. Every element serves a specific purpose. Nothing has been added merely to impress; nothing is there without a reason.

AERO is built using materials selected to ensure reliability in daily use and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade, prized for its corrosion resistance, edge retention, and ease of resharpening.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Nitrogen steel
Blade Finish: MIL-C-13924 burnishing
Handle: Stainless steel scales with anodized anticorodal aluminum grip
Blade Length: 69mm.
Blade thickness: 2.3 mm.
Overall length: 173 mm.
Weight: 92 g.
Lock type: Liner Lock
Clip: -
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

With thirty years of experience in designing professional knives, Extrema Ratio has developed a model designed for those seeking an everyday carry tool that combines functionality, lightness, and attention to detail.

The minimalist profile, clean lines, and light weight are not merely aesthetic choices for their own sake, but the result of a design focused on efficiency. Every element serves a specific purpose. Nothing has been added merely to impress; nothing is there without a reason.

AERO is built using materials selected to ensure reliability in daily use and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade, prized for its corrosion resistance, edge retention, and ease of resharpening.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Nitrogen steel
Blade Finish: MIL-C-13924 burnishing
Handle: Stainless steel scales with anodized anticorodal aluminum grip
Blade Length: 69mm.
Blade thickness: 2.3 mm.
Overall length: 173 mm.
Weight: 92 g.
Lock type: Liner Lock
Clip: -
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The Para Military 2 Lightweight represents the evolution of one of Spyderco’s most popular knives, combining high performance, low weight, and maximum reliability. The injection-molded FRN (fiberglass-reinforced nylon) scales ensure lightness and durability, while the exclusive Bi-Directional Texture provides a secure, non-slip grip in all conditions. The Compression Lock mechanism ensures a solid and reliable blade lock, while helping to keep the knife’s overall weight down.

The full-flat-ground blade in nitrogen-enriched CTS BD1N stainless steel offers an excellent balance of edge retention, strength, corrosion resistance, and ease of resharpening. The design is completed by the famous Trademark Round Hole for quick, ambidextrous opening, as well as ergonomic details designed to ensure precision and control during every use.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: CTS BD1N stainless steel
Blade Finish: Stonewashed
Handle: FRN Bi-Directional Texture
Blade Length: 88mm.
Blade Thickness: 3.7mm.
Closed length: 122 mm.
Overall length: 211 mm.
Weight: 78 g.
Closure: Compression Lock
Clip: Stainless steel, removable and ambidextrous
Packaging: Cardboard box with Spyderco logos
Notes: Lightweight version of the well-known Para Military 2 model

The Chnops Tactical is a more aggressive and functional reinterpretation of the original Chnops design, intended for tactical and high-performance use.

The Hybrid Cryo steel blade, developed by Midgard Messer with support from the Austrian manufacturer Böhler, offers an excellent balance of toughness, ease of resharpening, and corrosion resistance, with a hardness optimized between HRC 59-61 thanks to cryogenic treatment. This solution allows the material’s characteristics to be tailored to the specific needs of each knife, improving its overall performance.

The blade design, inspired by tactical lines, emphasizes control, penetration, and structural strength, while the flipper system ensures quick and intuitive opening in any situation. The black G10 handle and robust construction ensure high safety in use and superior control even in the most demanding conditions, making this model a reliable and modern technical tool.

Intended use: sports/collector's item

Production type: Industrial
Country of manufacture: Italy
Blade: Hybrid Cryo steel, 59/61 HRC
Blade finish: Black Idroglider
Handle: G10 with internal stainless steel liners
Blade length: 70 mm.
Blade thickness: 3mm.
Closed length: 102mm.
Total length: 180mm.
Handle thickness: 12 mm
Weight: 80 g
Closing mechanism: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Carson Flipper opening system on ball bearings - Design by Riccardo Gobbato / Raven Design

The Chnops Tactical is a more aggressive and functional reinterpretation of the original Chnops design, intended for tactical and high-performance use.

The Hybrid Cryo steel blade, developed by Midgard Messer with support from the Austrian manufacturer Böhler, offers an excellent balance of toughness, ease of resharpening, and corrosion resistance, with a hardness optimized between HRC 59-61 thanks to cryogenic treatment. This solution allows the material’s characteristics to be tailored to the specific needs of each knife, improving its overall performance.

The blade design, inspired by tactical lines, emphasizes control, penetration, and structural strength, while the flipper system ensures quick and intuitive opening in any situation. The black G10 handle and robust construction ensure high safety in use and superior control even under the most demanding conditions, making this model a reliable and modern technical tool.

Intended use: sports/collector's item

Production type: Industrial
Country of manufacture: Italy
Blade: Hybrid Cryo steel, 59/61 HRC
Blade finish: Stonewashed
Handle: G10 with internal stainless steel liners
Blade length: 70 mm.
Blade thickness: 3mm.
Closed length: 102mm.
Total length: 180mm.
Handle thickness: 12 mm
Weight: 80 g
Closing mechanism: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Carson Flipper opening system on ball bearings - Design by Riccardo Gobbato / Raven Design

Compact in size yet packed with technical features and premium materials, this folding knife designed by Jesper Voxnaes combines functionality, style, and sustainable innovation. The Böhler M398 steel blade with a stone-washed finish ensures high cutting performance, excellent corrosion resistance, and a hardness of HRC 60-62, making it ideal for advanced daily use.

The M49 cellulose acetate handle is one of the project’s most distinctive features: a next-generation bioplastic developed by Mazzucchelli 1849 that combines aesthetic quality, high mechanical performance, and a significant bio-based and biodegradable component. Traditionally used in high-end eyewear, this special formulation offers unique texture, color depth, and tactile feel, while also helping to reduce environmental impact.

Rounding out the knife are the liner lock mechanism, stone-washed titanium inserts, a polished reversible clip, and a construction entirely made in Italy, designed for those seeking a refined, technical, and contemporary EDC.

Intended use: Sports

Production type: Industrial
Country of manufacture: Italy
Blade: M398 stainless steel, 60/62 HRC
Blade finish: Stonewashed
Handle: M49 cellulose acetate, with internal stainless steel liners and titanium spacer
Blade length: 60 mm.
Blade thickness: 4mm.
Closed length: 88mm.
Total length: 148mm.
Thickness when closed: 11mm
Weight: 85g.
Closure: Liner Lock
Clip: flush-mounted, polished stainless steel, removable and reversible
Packaging: Display box made of clear film
Notes: Opens via Carson Flipper system - Ball-bearing action - Design by Jesper Voxnaes

The Skeletool CX packs essential tools into a sleek, smart design. We chose the CX over other Skeletool versions because of its smooth blade made from premium 154CM stainless steel. Of course, it’s much more than just a knife. The pliers, bit holder, and wire cutters will come in handy more often than you expect. In other words, the Skeletool CX has everything you need. Now also available in eye-catching new color variants, all with a Cerakote finish.

TOOLS AND FUNCTIONS:
* Needle-nose pliers
* Wire cutter
* Wire stripper
* Black DLC 154CM stainless steel smooth-edge blade with liner lock
* Locking bit holder for interchangeable bits
* Two Phillips screwdrivers: 3/32“ and 1/8”
* Two flathead screwdrivers, medium and small
* Bottle opener
* Carabiner
* Removable clip

SPECIFICATIONS: 
Closed length: 10 cm
Open length: 15.24 cm
Blade length: 6.60 cm
Weight: 142 g
Thickness: 1.32 cm

FEATURES:
Bit Holder - Conveniently store Leatherman tool bits in the handle of your multi-tool for easy access while working or for safe storage when not in use.

Lockable blade - Knife blade locks into place when fully open. The user must manually unlock the blade to fold it back, allowing for much safer use.

Replaceable Pocket Clip - A removable clip that allows the user to carry their multi-tool attached to a pocket or belt loop without using a sheath. By removing the clip, the user can easily carry their tool in a sheath if desired.

Externally Accessible Features - This multi-tool features tools that are accessible while the tool is folded or closed, mimicking the functionality of a pocket knife.

One-Handed Operation - Every tool on this multi-tool can be opened and operated with one hand. This allows the user to keep the other hand free for situations requiring multitasking or an extra hand.

The Skeletool CX packs essential tools into a sleek, smart design. We chose the CX over other Skeletool models because of its smooth blade made from premium 154CM stainless steel. Of course, it’s much more than just a knife. The pliers, bit holder, and wire cutters will come in handy more often than you expect. In other words, the Skeletool CX has everything you need. Now also available in eye-catching new color variants, all with a Cerakote finish.

TOOLS AND FUNCTIONS:
* Needle-nose pliers
* Wire cutter
* Wire stripper
* Desert Cerakote 154CM stainless steel blade with a smooth edge and liner lock
* Lockable bit holder for interchangeable bits
* Two Phillips screwdrivers: 3/32“ and 1/8”
* Two flathead screwdrivers: medium and small
* Bottle opener
* Carabiner
* Removable clip

SPECIFICATIONS: 
Closed length: 10 cm
Open length: 15.24 cm
Blade length: 6.60 cm
Weight: 142 g
Thickness: 1.32 cm

FEATURES:
Bit Holder - Conveniently store Leatherman tool bits in the handle of your multi-tool for easy access while working or for safe storage when not in use.

Lockable Blade - Knife blade locks into place when fully extended. The user must manually unlock the blade to retract it, allowing for much safer use.

Replaceable Pocket Clip - A removable clip that allows the user to carry their multi-tool attached to a pocket or belt loop without using a sheath. By removing the clip, the user can easily carry their tool in a sheath if desired.

Externally Accessible Features - This multi-tool features tools that are accessible while the tool is folded or closed, mimicking the functionality of a pocket knife.

One-Handed Operation - Every tool on this multi-tool can be opened and operated with one hand. This allows the user to keep the other hand free for situations requiring multitasking or an extra hand.

The Skeletool CX packs essential tools into a sleek, smart design. We chose the CX over other Skeletool versions because of its smooth blade made from premium 154CM stainless steel. Of course, it’s much more than just a knife. The pliers, bit holder, and wire cutters will come in handy more often than you expect. In other words, the Skeletool CX has everything you need. Now also available in eye-catching new color variants, all with a Cerakote finish.

TOOLS AND FUNCTIONS:
* Needle-nose pliers
* Wire cutter
* Wire stripper
* Black DLC 154CM stainless steel smooth-edge blade with liner lock
* Locking bit holder for interchangeable bits
* Two Phillips screwdrivers: 3/32“ and 1/8”
* Two flathead screwdrivers, medium and small
* Bottle opener
* Carabiner
* Removable clip

SPECIFICATIONS: 
Closed length: 10 cm
Open length: 15.24 cm
Blade length: 6.60 cm
Weight: 142 g
Thickness: 1.32 cm

FEATURES:
Bit Holder - Conveniently store Leatherman tool bits in the handle of your multi-tool for easy access while working or for safe storage when not in use.

Lockable blade - Knife blade locks into place when fully open. The user must manually unlock the blade to fold it back, allowing for much safer use.

Replaceable Pocket Clip - A removable clip that allows the user to carry their multi-tool attached to a pocket or belt loop without using a sheath. By removing the clip, the user can easily carry their tool in a sheath if desired.

Externally Accessible Features - This multi-tool features tools that are accessible while the tool is folded or closed, mimicking the functionality of a pocket knife.

One-Handed Operation - Every tool on this multi-tool can be opened and operated with one hand. This allows the user to keep the other hand free for situations requiring multitasking or an extra hand.

SATRE F è un chiudibile compatto pensato per uso quotidiano. Mantiene l’impostazione robusta della linea SATRE in un formato tascabile, con ingombri ridotti e portabilità reale. Sta in tasca senza dare fastidio, ma quando serve è pronto.

Apertura flipper rapida e controllabile con una mano. Struttura con doppia cartella in acciaio e blocco Liner-Lock: rigido, affidabile, senza giochi. La clip deep carry lo rende discreto in tasca. La fresatura sulla guancetta non è solo estetica: permette di identificare subito la variante anche da chiuso.

Le versioni in Böhler N690Co (Black, Stone Washed) puntano su resistenza all’usura e buona tenuta del filo, con manutenzione semplice. Le varianti in acciaio Nitrogen (Periwinkle, Orange, Yellow) privilegiano la resistenza alla corrosione, ideali per ambienti umidi o uso intensivo all’aperto. La versione Outdoor Nitrogen è la più orientata all’impiego sul campo.

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: Stonewashed
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 98 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

SATRE F è un chiudibile compatto pensato per uso quotidiano. Mantiene l’impostazione robusta della linea SATRE in un formato tascabile, con ingombri ridotti e portabilità reale. Sta in tasca senza dare fastidio, ma quando serve è pronto.

Apertura flipper rapida e controllabile con una mano. Struttura con doppia cartella in acciaio e blocco Liner-Lock: rigido, affidabile, senza giochi. La clip deep carry lo rende discreto in tasca. La fresatura sulla guancetta non è solo estetica: permette di identificare subito la variante anche da chiuso.

Le versioni in Böhler N690Co (Black, Stone Washed) puntano su resistenza all’usura e buona tenuta del filo, con manutenzione semplice. Le varianti in acciaio Nitrogen (Periwinkle, Orange, Yellow) privilegiano la resistenza alla corrosione, ideali per ambienti umidi o uso intensivo all’aperto. La versione Outdoor Nitrogen è la più orientata all’impiego sul campo.

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: MIL-C-13924 burnishing
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 98 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

SATRE F è un chiudibile compatto pensato per uso quotidiano. Mantiene l’impostazione robusta della linea SATRE in un formato tascabile, con ingombri ridotti e portabilità reale. Sta in tasca senza dare fastidio, ma quando serve è pronto.

Apertura flipper rapida e controllabile con una mano. Struttura con doppia cartella in acciaio e blocco Liner-Lock: rigido, affidabile, senza giochi. La clip deep carry lo rende discreto in tasca. La fresatura sulla guancetta non è solo estetica: permette di identificare subito la variante anche da chiuso.

Le versioni in Böhler N690Co (Black, Stone Washed) puntano su resistenza all’usura e buona tenuta del filo, con manutenzione semplice. Le varianti in acciaio Nitrogen (Periwinkle, Orange, Yellow) privilegiano la resistenza alla corrosione, ideali per ambienti umidi o uso intensivo all’aperto. La versione Outdoor Nitrogen è la più orientata all’impiego sul campo.

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: MIL-C-13924 burnishing
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 98 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

SATRE F è un chiudibile compatto pensato per uso quotidiano. Mantiene l’impostazione robusta della linea SATRE in un formato tascabile, con ingombri ridotti e portabilità reale. Sta in tasca senza dare fastidio, ma quando serve è pronto.

Apertura flipper rapida e controllabile con una mano. Struttura con doppia cartella in acciaio e blocco Liner-Lock: rigido, affidabile, senza giochi. La clip deep carry lo rende discreto in tasca. La fresatura sulla guancetta non è solo estetica: permette di identificare subito la variante anche da chiuso.

Le versioni in Böhler N690Co (Black, Stone Washed) puntano su resistenza all’usura e buona tenuta del filo, con manutenzione semplice. Le varianti in acciaio Nitrogen (Periwinkle, Orange, Yellow) privilegiano la resistenza alla corrosione, ideali per ambienti umidi o uso intensivo all’aperto. La versione Outdoor Nitrogen è la più orientata all’impiego sul campo.

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: MIL-C-13924 burnishing
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 98 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

SATRE F è un chiudibile compatto pensato per uso quotidiano. Mantiene l’impostazione robusta della linea SATRE in un formato tascabile, con ingombri ridotti e portabilità reale. Sta in tasca senza dare fastidio, ma quando serve è pronto.

Apertura flipper rapida e controllabile con una mano. Struttura con doppia cartella in acciaio e blocco Liner-Lock: rigido, affidabile, senza giochi. La clip deep carry lo rende discreto in tasca. La fresatura sulla guancetta non è solo estetica: permette di identificare subito la variante anche da chiuso.

Le versioni in Böhler N690Co (Black, Stone Washed) puntano su resistenza all’usura e buona tenuta del filo, con manutenzione semplice. Le varianti in acciaio Nitrogen (Periwinkle, Orange, Yellow) privilegiano la resistenza alla corrosione, ideali per ambienti umidi o uso intensivo all’aperto. La versione Outdoor Nitrogen è la più orientata all’impiego sul campo.

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: N690Co stainless steel, 58 HRC
Blade finish: MIL-C-13924 burnishing
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 96.5 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: N690Co stainless steel, 58 HRC
Blade finish: Stonewashed
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 96.5 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

Forged from the legacy of Narsil, Isildur’s glorious sword, the Böker Plus Inarsil is the result of a collaboration between Jörg Sprave and Midgards Messer, a masterpiece of timeless charm. A symbol of hope and courage in Middle-earth, Narsil—whose name evokes Anar (Sun) and Isil (Moon)—was broken during the Battle of the Last Alliance, losing its ancient power forever.

With the Böker Plus Inarsil, that small flame shines once more in the form of a tactical folding knife whose aesthetics are inspired by great fantasy swords. The symmetrical single-edged blade, with a dagger profile, opens quickly and precisely via a ball-bearing-mounted flipper; once open, the flipper also acts as a guard, increasing safety and control during use. The central scabbard and refined satin finish further enhance the “sword-style” look.

Made of D2 steel, the blade guarantees high wear resistance and excellent edge retention, making the Inarsil a reliable companion for both daily use and the most demanding outdoor activities.

The ergonomic handle echoes the perfect symmetry of the tactical design. The weight-reducing milled sections and carefully engineered balance ensure a firm grip and dynamic handling. The front features black G10 scales, while the stainless steel back maintains a classic, robust elegance. The liner lock secures the blade safely and reliably.

To preserve the clean aesthetic inspired by legendary swords, the knife has no pocket clip; instead, a triangular hole on the pommel allows for the attachment of a lanyard.

Intended use: Collectible / Sport

Production type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade finish: dual tone: satin and micro-beaded
Handle: stainless steel with G10 scales
Blade length: 117mm.
Blade thickness: 4.7 mm.
Weight: 432 g.
Overall length: 282 mm.
Clip: -
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Jörg Sprave and Midgards Messer - ball-bearing flipper opening system

Smart, adaptable, and always sharp—just like crows and ravens, among the most cunning birds in nature: characteristics that find their perfect expression in the Böker Plus Corvus. Designed by Kirk Mayberry of Tennessee, this EDC folding knife is a blend of design and functionality, combining simplicity with a tactical touch to create an extremely versatile everyday companion.

The ergonomic, non-slip Micarta handle ensures comfort and control in any situation. The Wharncliffe blade stands out for its unique two-tone finish featuring Dark-Stonewash and satin-finished surfaces, combining aesthetics with wear resistance while minimizing the visibility of scratches and marks over time. The swedge on the spine emphasizes the knife’s dynamic look and enhances precision during delicate tasks.

Crafted from Nitro-V steel, the blade offers excellent edge retention, hardness, and corrosion resistance, making it ideal for both daily use and outdoor activities. The rounded tip geometry and jimping on the spine increase safety and control during use.

Smooth one-handed opening is ensured by the ball-bearing-equipped flipper, while the liner lock provides a stable and reliable blade lock. The deep-carry stainless steel clip (tip-up/right) allows for discreet and practical carrying, complemented by a lanyard hole that offers additional carrying options.

Intended Use: Sport

Production Type: Industrial
Country of Manufacture: China
Blade: Nitro-V stainless steel
Blade Finish: Dark Stonewash and Satin
Handle: Micarta
Blade Length: 70mm.
Blade thickness: 3.2mm.
Overall length: 170mm.
Weight: 88g.
Clip: stainless steel, removable
Lock: Liner Lock
Packaging: cardboard box with Boker Plus logos
Notes: Flipper opening system on ball bearings

“La Joie des Couteaux” – Stéphane Espi brings his passion for exceptional knives to life with the Böker Plus Fructis. The self-taught French custom knife maker infuses his designs with a balanced character, enriched by subtle nuances of understated elegance and timeless style.

With a fresh and “fruity” touch, this minimalist gentleman’s knife enhances everyday life thanks to well-thought-out technical solutions. Among these, the sheepsfoot blade stands out, featuring a ball-bearing slide mechanism made of high-performance Nitro-V steel—known for its excellent edge retention, toughness, and corrosion resistance—along with lightweight G10 scales that ensure a comfortable grip. The knife lends itself with precision and ease to everyday tasks such as opening boxes or cutting ropes.

This EDC combines reliability and discretion thanks to the intelligent interaction between the front flipper and liner lock, which allows for safe opening and closing of the blade. The tip-up clip allows for discreet deep-carry, keeping the knife always within reach.

Intended Use: Sports

Production Type: Industrial
Country of Manufacture: China
Blade: Nitro-V stainless steel
Blade Finish: Satin
Handle: G10
Blade Length: 80mm.
Blade Thickness: 3.2mm.
Overall Length: 180mm.
Weight: 75g.
Clip: Stainless steel, removable
Lock: Liner Lock
Packaging: Cardboard box with Boker Plus logos
Notes: Front flipper opening system on ball bearings

Top-tier quality, without compromise. Whether as an entry badge or a calling card, the Böker Modern Club Knife is the key to an exclusive club, embodying high standards, unwavering reliability, and timeless elegance.

Unbound by traditional conventions, this pocket knife reinterprets the spirit of the original model with a modern approach. The slimmer sibling of the Böker Sport Knife, the Modern Club Knife forgoes tooling in favor of clean, minimalist lines. The drop-point blade with ball-bearing action, crafted from Nitro-V steel with a satin finish, ensures excellent edge retention and corrosion resistance, opening with extreme fluidity via a flipper and offering maximum versatility for everyday use.

The contrast between the titanium-gray coated handle body with integrated bolsters and the black micarta scales enhances the “smoky” character of this gentleman’s knife, while the reliable liner lock, thanks to its discreet design, evokes the aesthetics of a hidden frame lock. Rounding out the design is the deep-carry clip on the right side (tip-up), perfect for discreet carry.

Intended Use: Sports

Production Type: Industrial
Country of Manufacture: China
Blade: Nitro-V stainless steel
Blade Finish: Satin
Handle: Steel bolsters with Grey Titanium PVD coating and micarta scales
Blade Length: 73mm.
Blade thickness: 2.3 mm.
Overall length: 168 mm.
Weight: 67 g.
Clip: stainless steel with Black Titanium PVD coating, removable
Lock: Liner Lock
Packaging: cardboard box with Boker Plus logos
Notes: Flipper opening system on ball bearings

Inspired by the traditional farm knife, the Stockman has proven its effectiveness over the centuries as a versatile tool for everyday work. In homage to this classic design, Böker Plus offers a modern reinterpretation, enhanced with high-end technical details. Among these, the clip-point blade with ball-bearing opening stands out—crafted from Nitro-V steel, which offers high corrosion resistance and long-lasting edge retention—along with the ergonomically shaped Micarta scales.

The slim profile ensures exceptional comfort in the hand, making it ideal for effortlessly tackling everyday tasks. Opening is quick and intuitive thanks to the flipper, while the discreet liner lock ensures practical and safe use. The all-black look, enhanced by the protective titanium coating on the blade and bolster, gives the knife a modern, almost tactical character. Rounding it all out is the tip-up clip (right-handed), perfect for discreet carry in a pocket.

Intended Use: Sports

Production Type: Industrial
Country of Manufacture: China
Blade: Nitro-V stainless steel
Blade Finish: Black Titanium PVD
Handle: Steel liners with Black Titanium PVD finish and micarta scales
Blade Length: 84mm.
Blade thickness: 2.3 mm.
Overall length: 186 mm.
Weight: 63 g.
Clip: stainless steel with Black Titanium PVD coating, removable
Lock: Liner Lock
Packaging: cardboard box with Boker Plus logos
Notes: Flipper opening system on ball bearings

Get ready for action!

It’s not every day you come across a tool capable of completely redefining its category. The Provoke X is exactly that: a revolutionary product that builds on the success of the famous Provoke karambit, bringing innovative Kinematic technology to an entirely new segment. 

This one-of-a-kind “morphing” axe fits comfortably in your pocket and opens with a fluid wrist motion, ready for use in an instant. The blade and tip lock into the open position thanks to the reliable, industry-leading Deadbolt system and retract into recessed slots in the handle when closed. Closing the knife automatically engages the safety, which can be easily disengaged with either hand from either side of the handle. 

Crafted from corrosion-resistant SUJ2 steel with a titanium nitride coating, the Provoke X is designed to handle even the most demanding applications: a reliable deterrent for those ready for anything.

Intended Use: Collection / Tactical

Production Type: Industrial
Country of Manufacture: Taiwan
Blade: SUJ2 steel
Blade Finish: Black Titanium Nitride
Handle: Stainless steel with GRN (Glass Reinforced Nylon) covers
Blade Length: 46.8 mm.
Blade Thickness: 3.1 mm.
Closed length: 220.7 mm.
Overall length: 220.7 mm.
Weight: 374 g.
Lock: Deadbolt Lock (modified backlock) operable from both sides
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Joe Caswell

Compact, minimalist, designed to be your everyday companion. The AMON EDC Button Lock, designed by Denis Simonutti, is a knife that combines technical precision with a contemporary aesthetic.

The ELMAX sintered steel blade, with a stonewash finish, offers durability, reliability, and long-lasting performance. The button lock mechanism and ball-bearing pivot system ensure a smooth, precise, and secure opening, designed for daily use.

The Canvas Green micarta handle adds personality and a natural grip, while the compact lines and lightweight design make AMON a discreet yet assertive companion, always ready for action.

An EDC designed for those who appreciate the perfect balance between design, functionality, and high-quality materials.

Intended use: EDC / Sport

Production type: Industrial
Country of manufacture: Italy
Blade: Elmax stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 3mm.
Closed length: 95mm.
Overall length: 170mm.
Weight: 68g.
Closure: Button Lock
Clip: Stonewashed stainless steel, removable
Packaging: Cardboard box with Mercury logos
Notes: Ball-bearing opening

Compact, minimalist, designed to be your everyday companion. The AMON EDC Button Lock, designed by Denis Simonutti, is a knife that combines technical precision with a contemporary aesthetic.

The ELMAX sintered steel blade, with a stonewash finish, offers durability, reliability, and long-lasting performance. The button lock mechanism and ball-bearing pivot system ensure a smooth, precise, and secure opening, designed for daily use.

The red Burlap micarta handle adds personality and a natural grip, while the compact lines and lightweight design make AMON a discreet yet assertive companion, always ready for action.

An EDC designed for those who appreciate the perfect balance between design, functionality, and high-quality materials.

Intended use: EDC / Sport

Production type: Industrial
Country of manufacture: Italy
Blade: Elmax stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 3mm.
Closed length: 95mm.
Overall length: 170mm.
Weight: 68g.
Closure: Button Lock
Clip: Stonewashed stainless steel, removable
Packaging: Cardboard box with Mercury logos
Notes: Ball-bearing opening

The Boker Plus Little Friend Black is a compact EDC pocket knife that combines modern design, premium materials, and maximum practicality for everyday use. Designed by Danish designer Jesper Voxnaes, this one-handed folder stands out for its clean lines and ergonomics studied in detail.

The ball-bearing Drop Point blade, made of CPM-S35VN steel, guarantees excellent edge retention, wear resistance, and great reliability over time. The elegant hairline finish, together with the gold anodized elements on the backspacer and pivot screw, further enhances the refined and sophisticated character of the knife. Opening is smooth and precise, thanks to the flipper or thumb hole.

The liner lock ensures stable locking during use, while the black G10 scales offer a firm and comfortable grip. The EDC profile is completed by the deep-carry clip (tip-up, right side) for discreet carry and the lanyard hole for even greater versatility. A compact, elegant, and high-performance everyday companion.

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: CPM-S35VN stainless steel
Blade finish: Satin
Handle: G10
Blade length: 78.6mm.
Blade thickness: 4 mm.
Closed length: 108 mm.
Total length: 188 mm.
Weight: 135 g.
Clip: stainless steel, removable
Lock: Liner Lock
Packaging: cardboard box with Boker Plus logos, nylon pouch with zip
Notes: Design by Jesper Voxnaes

Designed for those who seek the essentials, Onefold Alox is a minimalist and extremely practical multi-tool for everyday life. The bold style of the skeletonized Alox scales meets the safety of a large lockable blade, creating a simple, reliable tool with a modern design. Always with you, thanks to the riveted carrying clip: Onefold Alox is minimalism at its purest.

Tools
* Large blade
* Carrying clip

Dimensions
* Blade length: 70 mm
* Blade thickness: 2.5 mm
* Total length: 162 mm
* Closed length: 93 mm
* Weight: 54 g

Details
* Functions: 2
* Country of origin: Switzerland
* Blade material: stainless steel
* Lockable blade: Yes, with Liner Lock
* Handle material: Anodized aluminum

Designed for those who seek the essentials, Onefold Alox is a minimalist and extremely practical multi-tool for everyday life. The bold style of the skeletonized Alox scales meets the safety of a large lockable blade, creating a simple, reliable tool with a modern design. Always with you, thanks to the riveted carrying clip: Onefold Alox is minimalism at its purest.

Tools
* Large blade
* Carrying clip

Dimensions
* Blade length: 70 mm
* Blade thickness: 2.5 mm
* Total length: 162 mm
* Closed length: 93 mm
* Weight: 54 g

Details
* Functions: 2
* Country of origin: Switzerland
* Blade material: stainless steel
* Lockable blade: Yes, with Liner Lock
* Handle material: Anodized aluminum

Designed for those who seek the essentials, Onefold Alox is a minimalist and extremely practical multi-tool for everyday life. The bold style of the skeletonized Alox scales meets the safety of a large lockable blade, creating a simple, reliable tool with a modern design. Always with you, thanks to the riveted carrying clip: Onefold Alox is minimalism at its purest.

Tools
* Large blade
* Carrying clip

Dimensions
* Blade length: 70 mm
* Blade thickness: 2.5 mm
* Total length: 162 mm
* Closed length: 93 mm
* Weight: 54 g

Details
* Functions: 2
* Country of origin: Switzerland
* Blade material: stainless steel
* Lockable blade: Yes, with Liner Lock
* Handle material: Anodized aluminum

KNIFE TAKEN FROM A PRIVATE COLLECTION
* Origin: Taken back from a private owner, previously purchased
* Condition: Like new, never used, without box
* Availability on the market: Discontinued
* Edge: Factory edge
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: Cordura sheath with insert for the two included blades
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house workshop

Intended use: Collection, light outdoor
Production type: Industrial
Country of origin: United States of America
Blade: Stainless steel, plain edge
Blade finish: Bead blasted
Handle: GRN (Glass Reinforced Nylon) with textured surface
Blade length: 83mm
Blade thickness: -
Closed length: 107mm
Overall length: 187mm
Closed thickness: -
Weight: 74g
Locking mechanism: Gerber patented Bolt Action
Clip: None
Packaging: Original Gerber sheath complete with two interchangeable blades (saw blade and skinning blade)
Notes: Late 1980s vintage knife, Made in USA, 1st Production Run, never used, never sharpened, mint condition

The Muela Verdugo by Tommaso Rumici is a tactical-sport folding knife, designed for dynamic use but also for everyday use. Industrially manufactured in Spain by the Muela brand, it combines materials and finishes designed to ensure robustness, wear resistance, and reliable performance.

The D2 tool steel blade with Blackwash PTFE treatment offers high hardness, excellent edge retention, and an anti-reflective finish, while the black G10 handle ensures lightness and a secure grip. With a blade length of 106 mm, a thickness of 4 mm, and a weight of approximately 150 g, it is a high-performance, well-balanced tool. The Liner Lock closure and removable black PTFE stainless steel clip complete its ergonomic design and practicality.

Intended primarily for sports and outdoor use, the Verdugo combines tactical functionality and modern design, making it an excellent choice for enthusiasts and demanding users.

Intended use: Sports

Type of production: Industrial
Country of production: Spain
Blade: D2 tool steel
Blade treatment: Blackwash PTFE
Handle: G10
Blade length: 106mm.
Blade thickness: 4mm.
Total length: 229mm.
Weight: 150g.
Clip: black PTFE stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with Muela logos
Notes: Design by Tommaso Rumici

The Böker Plus The Dace is an agile, fast, and incredibly versatile pocket knife. Conceived by designer and avid fisherman Joe Mangiafico, this new project draws inspiration from the fish from which it takes its name, reinterpreting its slender silhouette in an elegant and functional form.

Designed to move confidently through the “waters” of everyday EDC, The Dace excels at cutting cardboard, rope, and packaging, without sacrificing precision on fish and meat. The drop-point blade with ball bearing opening, made of Nitro-V with high edge retention and corrosion resistance, snaps decisively when the flipper is activated, while the liner lock remains perfectly integrated into the flat gray 6061-T6 aluminum handle.

Iridescent blue anodized details—such as the tip-up clip, flat pivot screw, and handle screws—add a distinctive touch. The pronounced stonewash finish, non-slip jimping on the blade spine, and decorative ricasso complete a knife that combines style and performance.

Intended use: EDC / Sports 

Type of production: Industrial
Country of production: China
Blade: Nitro-V stainless steel 
Blade finish: Stonewashed
Handle: aluminum with iridescent blue anodized accents
Blade length: 73mm
Blade thickness: 3.2mm
Closed length: 103mm
Total length: 176 mm
Weight: 90 g
Lock: Liner lock
Clip: Removable, iridescent blue stainless steel
Packaging: Cardboard box with Böker Plus logos
Notes: Design by Joe Mangiafico

Classic, unpretentious, honest: the Boker Plus Rusticus is a practical and simple pocket knife. Inspired by the typical first pocket knives of youth and the usual high functionality of Boker Plus, the Rusticus combines high everyday utility with the necessary touch of nostalgia.

The clip-point blade made of 420 stainless steel with a stonewashed finish opens with a classic nail nick and locks with the reliable liner lock. The rustic ebony wood handle and brass-colored elements such as the liner, the outer ring of the blade pivot screw, and the lanyard hole accentuate the neat appearance of the folding knife and add a traditional touch. 

Practical and simple, it is the perfect gift idea as a first pocket knife.

Intended use: EDC / Sports

Type of production: Industrial
Country of production: China
Blade: 420 stainless steel
Blade treatment: Dark Stonewashed
Handle: Ebony wood
Blade length: 75mm.
Blade thickness: 1.5mm.
Total length: 175mm.
Weight: 39g.
Clip: -
Lock: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: -

Classic, unpretentious, honest: the Boker Plus Rusticus is a practical and simple pocket knife. Inspired by the typical first pocket knives of youth and the usual high functionality of Boker Plus, the Rusticus combines high everyday utility with the necessary touch of nostalgia.

The clip-point blade in 420 stainless steel with a satin finish opens with a classic nail nick and locks with the reliable liner lock. The rustic red beech wood handle and brass-colored elements such as the liner, the outer ring of the blade pivot screw, and the lanyard hole accentuate the neat appearance of the folding knife and add a traditional touch. 

Practical and simple, it is the perfect gift idea as a first pocket knife.

Intended use: EDC / Sports

Type of production: Industrial
Country of production: China
Blade: 420 stainless steel
Blade treatment: Satin finish
Handle: Red beech wood
Blade length: 75mm.
Blade thickness: 1.5mm.
Total length: 175mm.
Weight: 34g.
Clip: -
Lock: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: -

Every year, Christmas cookies, irresistibly fragrant gingerbread, and other sweet temptations herald the beginning of the magical Christmas season.

To make the wait for gifts even more enjoyable, Böker presents a low-calorie but iron-rich delicacy that is certainly not lacking in character: the Böker Plus Advent Calendar 2025.

Inside is a complete kit for assembling a high-quality, fully functional pocket knife, ready to be built day by day. This year, the gift table will be even more colorful with the Böker Plus Urban Trapper, which offers ample room for customization.

Based on the iconic Urban Trapper design by renowned US knifemaker Brad Zinker, this model gets a neoclassical touch thanks to its fully customizable button lock version.

The set includes a blade, several interchangeable scales and bolsters, alternative clips, and a few small surprises. One kit, endless combination possibilities, to create your own unique folding knife.

The Böker Plus Advent Calendar 2025 will undoubtedly be the highlight of any collection and the perfect gift for any knife enthusiast.

Limited edition, with step-by-step instructions and detailed video tutorials on YouTube.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: China
Blade: Steel
Blade treatment: Satin finish
Handle: variable (several alternatives included in the kit), depending on how it is configured by the user
Blade length: 87mm.
Blade thickness: 2.5mm.
Total length: 195mm.
Weight: variable (depending on how it is configured by the user)
Clip: variable (depending on how it is configured by the user)
Closure: Button Lock
Packaging: advent calendar cardboard box, with 24 inner boxes containing all the parts for assembly
Notes: printed instructions inside and step-by-step video instructions via a YouTube link in a scannable QR code

Every year, Christmas cookies, gingerbread with its intoxicating aroma, and other irresistible delicacies herald the beginning of the magical Christmas season.

To sweeten the wait for gifts, Böker presents a low-calorie but iron-rich delicacy that is truly explosive: the Böker Plus Advent Calendar 2025.

Inside is a complete kit for assembling a high-quality, fully functional pocket knife, ready to be assembled day by day. This year, the gift table will be even more colorful with the Böker Plus Cataclyst, which offers ample room for creativity.

Inspired by the original Cataclyst model, this new customizable lockback adds a neoclassical touch to the design. The set includes two blades (one equipped with a thumb stud for more discreet carry in restricted areas), different scales and bolsters, alternative clips, and a few small surprises.

One kit, endless customization possibilities, to create your own unique folding knife. The Böker Plus Advent Calendar 2025 will be the highlight of any collection and the perfect gift for any knife enthusiast.

Limited edition, with step-by-step instructions and a detailed video tutorial on YouTube.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: China
Blade: variable (includes two different blades that can be used during assembly)
Blade treatment: Satin finish
Handle: variable (several alternatives included in the kit), depending on how it is configured by the user
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 173mm.
Weight: variable (depending on how it is configured by the user)
Clip: variable (depending on how it is configured by the user)
Closure: Back Lock
Packaging: Advent calendar cardboard box, with 24 inner boxes containing all the parts for assembly
Notes: printed instructions inside and step-by-step video instructions via a YouTube link in a scannable QR code

Intended use: Collection, display items, light everyday use
Type of production: Handmade
Country of production: Italy (Frosolone / Piscitelli workshop)
Blade: Stainless steel (polished)
Blade finish: Polished, hand-smoothed
Handle: Natural bovine horn (color tones may vary)
Blade length: 10 cm (9 cm sharp)
Blade thickness: 2.5 mm
Closed length: 12 cm
Total length: 22 cm
Closed thickness: 13.8 mm
Weight: 59 g
Locking system: “Pump” mechanism / release lever (internal spring)
Packaging: Standard cutlery box
Notes: The horn handle may vary in color and pattern due to its natural origin. The sharpening is entirely handmade.

The Kershaw Raygun (mod. 1427) is a compact and lightweight pocket knife designed for everyday carry and work. Thanks to its assisted flipper opening system, it combines robustness, practicality, and fast deployment at an affordable price.

The reverse tanto blade, made of 4Cr14 stainless steel with a stonewashed finish, offers a reinforced tip for piercing tasks and excellent corrosion resistance for daily use. The glass-filled nylon (GFN) handle ensures a secure grip and long-lasting durability without adding weight to your pocket.

A reversible deep-carry pocket clip and secure liner lock make the Raygun a versatile choice for those seeking a reliable, easy-to-handle EDC knife with a clean and professional look — ideal for workshop work, light outdoor activities, and any situation requiring a practical and ready-to-use knife.

Intended Use: Everyday Carry, work, workshop, light outdoor activities
Production Type: Industrial (series production)
Country of Manufacture: China (design and quality control by Kershaw / USA)
Blade Material: 4Cr14 stainless steel (high corrosion resistance)
Blade Finish: Stonewashed (satin metal finish that hides wear marks)
Handle: Glass-filled nylon (GFN) with ergonomic texture
Blade Length: 2.8 in (71 mm)
Blade Thickness: 0.11 in (≈2.8–3.0 mm)
Closed Length: 3.95 in (100 mm)
Overall Length: 6.75 in (171 mm)
Closed Thickness: 0.47 in (12 mm) (handle thickness)
Weight: 2.3 oz (≈65 g)
Locking Mechanism: Liner lock
Clip: Reversible deep-carry, tip-up (for right- or left-handed carry)
Packaging: Kershaw branded box (standard retail packaging)
Notes: Spring-assisted flipper opening for fast deployment; reverse tanto blade with reinforced tip; Kershaw design and quality control (USA), assembly/manufacture in China; excellent value for EDC and work use.

Intended use: EDC / sports

Type of production: Industrial
Country of production: Italy
Blade: Niolox stainless steel 59/61HRC
Blade finish: Black Top Shield
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 190mm.
Weight: 60g.
Closing mechanism: Back Lock
Clip: removable and reversible, stainless steel, flush
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: D2 tool steel
Blade treatment: Satin finish
Handle: Wood
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 210mm.
Weight: 151g.
Clip: black stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: -

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: D2 tool steel
Blade treatment: Blackwash PTFE
Handle: G10
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 210mm.
Weight: 151g.
Clip: black PTFE stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: -

PXLx is the evolution of our best seller PXLwh, the true workhorse of the PXL series. To make it even more versatile, we have added a sturdy pocket clip. It is a large, sturdy, lightweight, and extremely reliable folding knife.

The blade, made of Elmax, guarantees an exceptionally sharp and durable edge. The liner-lock system ensures maximum safety when opening, while the practical pivot on the blade allows you to open it easily with one hand, even when the other is busy.

The handle is made of Grilon, one of the most reliable technical materials in the field of high-performance plastics.

Intended use: Sports / Utility

Type of production: Industrial
Country of production: Sweden
Blade: Elmax 61/62 HRC stainless steel
Blade finish: Satin
Handle: Grilon
Blade length: 88mm.
Blade thickness: 3.5 mm.
Closed length: 111 mm.
Total length: 199 mm.
Closed thickness: 24 mm.
Weight: 133 g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Fallkniven logos
Notes: -

The KA-BAR EK Folder EK201 marks the debut of the first folding knife in the EK series. Designed by renowned designer Ondřej Němec (already known for his collaborations with Acta Non Verba), it combines a decisive tactical character with a sober and discreet design. Lightweight and compact, with a deep carry clip, it is a reliable and inconspicuous everyday companion.

The CPM S35VN steel blade, an evolution of the famous S30V, is created using the Crucible Particle Metallurgy process, which guarantees a fine and uniform microstructure. It offers an ideal balance between sharpness, mechanical strength, and corrosion protection. The black DLC coating reduces glare and gives the knife an elegant and functional look.

The GRN (glass fiber reinforced nylon) handle echoes the unmistakable hardware typical of the EK line, ensuring solidity and aesthetic continuity with the fixed models in the collection.

Intended use: Tactical / EDC

Type of production: industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade finish: Black DLC
Handle: GRN
Blade length: 99mm.
Blade thickness: 3mm.
Overall length: 235mm.
Weight: 98g.
Closing system: Liner Lock
Clip: removable and reversible, stainless steel, black painted
Packaging: cardboard box with Ka-Bar and Ek Commando Knife Co. logos
Notes: Design by Ondřej Němec - Carson Flipper opening system on ball bearings

Inspired by crescent-shaped dunes shaped by wind and erosion, the Böker Plus Barchan embodies the rugged and fascinating character of the desert. Far from the sands, this folding knife tackles every EDC task with determination, whether it's opening boxes, packaging, or ropes, thanks to its straight-back blade in 440B steel with a black stonewash finish.

The sand-brown G10 handle, ergonomic and with a texture reminiscent of wind ripples, ensures a firm grip and comfort. Smooth opening is guaranteed by ball bearings and the double flipper and front flipper system, while the sturdy liner lock secures the blade safely even during the most demanding tasks.

Convenient to carry, the Barchan is equipped with a tip-up pocket clip (right side). Functionality, design, and competitive pricing make this model an authentic Böker with a “plus.”

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 440B stainless steel
Blade treatment: Black Stonewashed
Handle: G10
Blade length: 83mm.
Blade thickness: 3.7mm.
Weight: 111g.
Total length: 200mm.
Clip: black stonewashed stainless steel, removable
Lock: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Kornel Kiss, Carson Flipper and Front Flipper opening system on ball bearings

One of the first lightweight folding knives with a carry clip, the Spyderco Delica® 4 is one of the brand's most popular and iconic models. In this special edition, the design is further enhanced by the use of exclusive CPM® SPY27® steel, developed in close collaboration with Crucible® Industries.

This is an advanced powder metallurgy steel that enhances the already high-performance formula of cobalt-enriched VG-10 by incorporating niobium, nitrogen, and higher amounts of carbon, molybdenum, and vanadium. The result is a material that offers an exceptional balance of edge retention, corrosion resistance, toughness, and ease of resharpening.

The PlainEdge™ full flat blade with a satin finish makes the most of these properties, while the FRN (glass-reinforced nylon fiber) handle, injection molded in the characteristic cobalt blue of the SPY27 line, ensures lightness and strength. The knife features a back lock mechanism and a four-position clip, configurable for tip-up or tip-down carry on either side.

Intended use: Sports

Type of production: industrial
Blade: CPM-SPY27 stainless steel
Blade finish: satin
Country of manufacture: Japan
Handle: FRN with stainless steel liners
Blade length: 74mm.
Blade thickness: 2.5mm.
Closed length: 108mm.
Total length: 181mm.
Weight: 68g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: cardboard case with Spyderco logos
Notes: -

Designed by renowned self-defense expert Michael Janich, the Yojimbo™ 2 played a key role in popularizing the tactical Wharncliffe concept. In this elite version, the design is further enhanced by the use of CPM® SPY27®, Spyderco's exclusive steel developed with Crucible® powder metallurgy technology.

Its advanced formula combines elements such as vanadium, molybdenum, niobium, and nitrogen, enhanced by the presence of cobalt and the CPM process, to offer an extraordinary balance between edge retention, corrosion resistance, and toughness. These qualities maximize the sharp profile of the hollow-ground Wharncliffe blade, ensuring superior cutting performance.

The handle features skeletonized stainless steel liners embedded between textured peel-ply G-10 scales, which form the basis of the sturdy Compression Lock® and serve as an anchor for the four-position reversible clip (tip-up/tip-down, right/left side).

As with the other models in the prestigious CPM SPY27 line, this Yojimbo 2 also features the characteristic cobalt blue scales, a hallmark of the collection.

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: USA
Blade: CPM-SPY27 stainless steel
Blade finish: Satin
Handle: G10 with stainless steel liners
Blade length: 3.15 inches (81 mm).
Blade thickness: 0.147 inches (3.7 mm).
Closed length: 4.5 inches (114 mm).
Overall length: 7.7 inches (195 mm).
Closed thickness: 11 mm.
Weight: 115 g.
Lock: Front Lock
Clip: multi-position, stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Michael Janich