Sport, Military and Collectible Knives | Coltelleria Collini

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Used, overall in good condition, with cosmetic signs of wear and tear on the blade that in no way compromise its concrete use
* Commercially available Out of production.
* Sharpening: Re-sharpened
* Marks on blade: Many cosmetic scratches from use that do not compromise its use
* Marks on handle: Small marks on handle screws from disassembly of parts.
* Box: Not present
* Scabbard: Present, original, complete with all its parts, in very good condition.
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory.

WP4 Rough Wolf is a knife researched and designed by chief instructor Paolo Bozzo of Wolfpack Survival Training (survival and survival school). This design was developed through years of direct experience in the field and further improves on the STF-3 model previously made in collaboration with Fox FKMD

Intended Use: Survival/Utlity

Production type: Industrial
Country of Production: Italy
Blade: Stainless Steel N690Co
Blade Finish: Black Stonewashed
Handle: Sand G10
Blade Length: 190mm.
Blade thickness: 5.8mm.
Total Length: 320mm.
Balance: Advanced to 3cm. from guard branch
Weight: 566g. (772g. with scabbard)
Sheath: by Radar, made of Kydex with multi-position Keyblock attachment
Packaging: without original packaging
Notes: designed by Paolo Bozzo - discontinued knife, withdrawn from a private collection, previously purchased and used, but in good condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private, previously purchased.
* Condition: Overall in good condition.
* Commercially available: Knife originally produced in 2014, currently discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: A few small marks given by time.
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel 154CM
Blade finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 88mm.
Blade thickness: 3.2mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 80g.
Closure: Back Lock
Clip: Removable and reversible, stainless steel
Notes: design by Mike Vellenkamp

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private, previously purchased.
* Condition: Overall in good condition.
* Commercially available: Knife originally produced in 2014, currently discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: A few small marks given by time.
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel 154CM
Blade finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 88mm.
Blade thickness: 3.2mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 80g.
Closure: Back Lock
Clip: Removable and reversible, stainless steel
Notes: design by Mike Vellenkamp

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Condition: Used, but in good condition, with some minor signs of wear and tear.
* Commercially available: Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: a few small signs of wear and tear. 
* Marks on handle: a few small signs of wear and tear.
* Packaging: / 
* Scabbard: /
* Manuals, Certificates and Warranties: / /
* Checked and Certified by our in-house laboratory.

Profiles is the name of this tactical model designed by Mike Vellekamp. The main features that distinguish it are definitely the shape of the blade and the perfect handle grip.

Intended Use: Tactical/CQC

Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58-60HRC steel
Blade Finish: Burnished
Handle: G10
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 225mm.
Weight: 132g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Notes: previously purchased knife, withdrawn from a private collection

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Typology: withdrawn by private individual
* Condition: in excellent condition
* Available on the market: discontinued since 2015
* Sharpening: factory sharpening
* Marks on the blade: small marks on the tip caused by the extraction from the sheath
* Marks on the handle: no marks
* Box: original Fox box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

ST3-F is a knife studied and designed by the head instructor Paolo Bozzo of TEAM SURVIVAL (survival and survival school).
This project was developed through years of direct experience in the field.

Intended use: Survival / Utlity

Type of production: Industrial
Production Lama: Italy
Blade: N690Co stainless steel
Blade treatment: Black Teflon
Handle: Green Canvas Micarta
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 360mm.
Balance: Advanced to 2.5cm. from the guard branch
Weight: 552g.
Sheath: in cordura with molle attachments
Packaging: cardboard box with Fox logos
Notes: designed by Paolo Bozzo

Intended use: Tactical

Type of production: Industrial
Production Lama: Taiwan
Blade: 440C stainless steel
Treatment Blade: Teflon
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Closed Length: 135mm.
Overall length: 185mm.
Thick when closed: -
Balancing: -
Weight: 120g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Blade Tech
Note: Opening system Wave, with patent Emerson

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present, original, but damaged
* Scabbard: Present, original, like new.
* Manuals, Certificates and Warranties: Yes
* Checked and Certified by our in-house laboratory



WP4 Rough Wolf is a knife researched and designed by chief instructor Paolo Bozzo of Wolfpack Survival Training (survival and survival school). This design was developed through years of direct experience in the field and further improves on the STF-3 model previously made in collaboration with Fox FKMD

Intended Use: Survival/Utlity

Production type: Industrial
Country of Production: Italy
Blade: Stainless Steel N690Co
Blade Finish: Black Stonewashed
Handle: Green G10
Blade Length: 190mm.
Blade thickness: 5.8mm.
Total Length: 320mm.
Balance: Advanced to 3cm. from guard branch
Weight: 566g. (772g. with scabbard)
Sheath: by Radar, in Kydex with multi-position Keyblock attachment
Packaging: cardboard box with Wolfpack Survival logos
Notes: designed by Paolo Bozzo




Dear Friend,
I am Paolo Bozzo and many times ml have found myself in unpleasant, pericolase and difficult situations. Designing a knife and testing it just a few afternoons in the woods is quite different than designing one trying to solve all those survival problems I have encountered in the last 25 years, both In ltaly and abroad. Mud, water, dirt, grease, blood, fatigue, night use, weak hand, limited space, trajectories, physical deficits, heat, cold, transportation, speed and much, much more...these are just some of the tests a good design must pass.

Here are some of the reasons for the WF4 Rough Wolf design.

1. Balance: it is fondamenlal that the center of gravity is shifted forward. beyond the heel, such that it decreases, i.e., saves energy when delivering the blow. one must always have the feeling that the knife falls forward.

2. Beating mass: 65% of the weight of the whole knife is between the first and second 3rd of the blade, giving maximum beating capacity in penetrating.

3. Cutting edge: due to the main core in the shape of an esse. the cutting edge is lower than the fingers of the handle, with the result that in the dynamics of the fendenle and biomechanics of the arm, the force expressed is never attenuated; especially never before the impact of the same on the object to be cut.

4. Blade height: compared to other blades, it has a significantly higher ability to dig holes.

s. Handling: excellent the ability to use the Wp4 for both coarse and precision work, this thanks to the ability to put the hand before the guard, giving absolute mastery of the blade despite its size. This is thanks to the large heel where the index finger can be inserted and the convenient thumb rest. It is also possible to do this while wearing tactical gloves.

6. Back: the inclination is reversed for 2 reasons; 1st to give forward beating mass, 2nd not to stress the wrist during use as chopping, a normal knife arrives at an angle on the object, devastating the point of impact being slight in thickness. This can only be avoided by straining the thumb-side wrist to tilt so that the back of the knife falls perpendicular on the object. The wp4 does not have this problem; it does not stress the wrist because the back of the blade already falls perpendicular to the object to be beaten.

7. Bevel: it is very high, has impressive penetration capacity.

8. Milling cutter: 5 millings placed on the blade plane for holding the knife with two hands when handling animal hides or for special uses during bushcrafting.

9. Grip: it is designed to decrease the possibility of losing the blade and avoid opening of the phalanges during pmlong use or in situations of prolonged physical deficit. Improved, anti-slip grip with internally concave Gauntlets to accommodate a Micro SurvivalKit.

As for the scabbard, I believe it is as important as the blade. I proceeded to design it and recommend its qualities; the main feature I wanted to put in designing it was the multi-positioning of the same: in particular, placing it at will on one's body or equipment facilitates the possibility of use.

This quality is particularly appreciated by military personnel, who are known to have special technical and logistical needs. For this purpose we have used in addition to Kydex the Keyblock closure, as well as the many holes along the perimeter; also safe for airdrop it has the possibility of use and positioning by both Right and Left handed operators.

PAUL BOZZO

Profiles is the name of this new model designed by Mike tactical VELLEKAMP. The main features that distinguish it are definitely the shape of the blade and the perfect grip of the handle. The sheath has been developed in collaboration with the American Blade Tech, well known in the tactical and military.

Intended Use: Tactical / CQC

Type of production: Industrial
Production Blade: Italy
Blade: Stainless N690Co 58-60HRC
Treatment Blade: Teflon
Handle material: G10
Blade length: 100mm.
Blade thickness: 4.5mm.
Length closed-mm.
Total length: 230mm.
Thick when closed:-mm.
Balance: back to 40mm from the heel
Weight: 172g.
Closing: -
Clip: -
Sheath: Kydex, made in USA, with MOLLE compatible clip
Packaging: cardboard box with logos FOX
Notes: -

New version 2014 with Foliage Green Micarta handle

ST3-F is a knife designed and drawn by chief instructor Paul Bozzo TEAM SURVIVAL (school of survival and survival).
This project was developed through years of direct experience in the field.

Intended Use: Survival / Utlity

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Black Teflon
Handle: Canvas Micarta Green
Blade length: 220mm.
Blade thickness: 6mm.
Overall length: 360mm.
Balancing: Advanced 2.5 cm. the branch of guard
Weight: 552g.
Sheath: Cordura with soft attacks
Packaging: cardboard box with Fox logos
Note: designed by Paul Bozzo