Sport, Military and Collectible Knives | Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.

In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collection

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private seller, previously purchased
* Condition: Overall in excellent condition
* Availability on the market: Hard to find
* Sharpening: Factory-sharpened
* Marks on blade: A few small abrasions visible against the light on the mirror finish
* Marks on handle: None
* Box: Present and complete
* Sheath: /
* Manuals, Certificates, and Warranties: Present
* Inspected and Certified by our in-house laboratory

The Rockstead HIGO II in titanium is not simply a high-end folding knife: it is the ultimate embodiment of Japanese philosophy applied to cutting, where every detail is pushed to the limits of perfection.

The minimalist, flawless titanium handle serves as a counterpoint to a ZDP-189 blade hardened to extreme hardness and finished with an almost unreal mirror polish. The result is not merely aesthetic: it is a living surface, capable of gliding through material with a smoothness and continuity that few knives in the world can offer.

Rockstead’s proprietary convex geometry does more than just cut: it separates, controls, and guides. It is a blade designed for those who recognize the difference between extreme sharpness and true long-term efficiency.

The HIGO II is an object for connoisseurs, where tolerances, treatments, and finishes are not mere technical specifications, but part of a precise language.

Intended use: Collectible / Sport

Production type: Midtech
Country of manufacture: Sakai - Japan
Blade: ZDP-189 stainless steel, hardened to 66.5 HRC
Blade finish: mirror polished
Handle: titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Closed thickness: 12.2mm.
Weight: 136g.
Opening mechanism: ambidextrous pivot 
Washers: brass
Closure: FrameLock with SKD11 striker at 61HRC
Clip: removable, 420J2 stainless steel with PVD coating
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: knife from a private collection, previously purchased

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: knife from 1992 in perfect mechanical condition and excellent aesthetic condition, showing only a few small scratches on the steel heads
* Available on the market: Out of production and difficult to find, model marketed in the 1990s
* Sharpness: Factory sharp
* Marks on blade: none
* Marks on handle: very small scratches/hairlines on the steel heads
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

The Buck 551, often known as “King Charles II,” is a vintage folding knife produced in the United States between the early and mid-1990s in limited quantities.

Appreciated by collectors and enthusiasts of historic American knives, it is a more compact version than other Buck models from the same period, designed for everyday use but with careful workmanship and reliable materials. 

The 420HC stainless steel blade offers good edge retention and corrosion resistance, while the laminated wood scales with polished steel bolsters give it a classic, understated look that echoes the style of traditional Buck knives.

Intended use: EDC / Sports / Hunting

Type of production: industrial
Blade: 420HC stainless steel
Blade finish: Satin
Country of manufacture: USA
Handle: steel bolsters and laminated wood
Blade length: 70mm.
Blade thickness: 2mm.
Closed length: 98mm.
Overall length: 168mm.
Weight: 70g.
Locking system: Back lock
Clip: -
Packaging: -
Notes: vintage knife from 1992, previously purchased, from a private collection

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: In excellent condition, shows a scratch of about 2.5 cm on the blade
* Commercial Availability: Hard to find
* Sharpening: Factory edge, can be improved
* Blade Marks: shows a scratch of about 2.5 cm on the blade
* Handle Marks: -
* Box: -
* Sheath: in excellent condition, complete
* Manuals, Certificates and Warranties: -
Checked and Certified by our in-house workshop

The Buck 192 Vanguard is a premium-quality hunting knife, made in the USA and designed to deliver outstanding performance in all outdoor situations. The ergonomic handle made of fine wood with brass fittings gives the knife a classic and sturdy appearance, while the drop point blade in 420HC stainless steel ensures a reliable and long-lasting cut.

192 - with hyphen: this model features the marking “192-”, a production detail found on Buck knives made in the 1990s. This makes the knife particularly interesting for collectors and fans of the American brand.

Blade length: 102 mm
Total length: 216 mm
Blade material: 420HC stainless steel
Handle: fine wood with brass bolsters and scales
Sheath: high-quality brown leather
Production: Made in USA

This knife is ideal for hunting, hiking, camping, or as a collectible item. The Buck 192 Vanguard combines functionality, design, and reliability in a single tool appreciated worldwide.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: 2022 model in excellent overall condition, a few imperceptible abrasions on the handle and a couple of superficial scratches visible only when held up to the light on the tip of the blade
* Available on the market: Difficult to find
* Sharpness: Factory sharp
* Marks on blade: a couple of superficial scratches visible only when held up to the light on the tip of the blade
* Marks on handle: a few imperceptible abrasions on the handle
* Box: Present and complete
* Sheath: /
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

The Rockstead brand, owned by Ishida Co. of Sakai, Japan, currently markets the best industrial knives currently in production.

Created by Katsumi Kitano, who has been producing high-quality knives for over 20 years and has been awarded the highest recognition among artisan knife makers in Japan, these knives are exceptional in terms of cutting ability, penetration, and edge retention, as well as in terms of innovation in the materials used and construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP-189 stainless steel at 67.3 HRC
Blade treatment: Mirror polished
Handle: A7075 duralumin with Hv400 hardness anodization
Blade length: 70mm.
Blade thickness: 3.3 mm.
Closed length: 104 mm.
Total length: 176 mm.
Closed thickness: 11.4 mm.
Weight: 74 g.
Closure: FrameLock with SUS420J2 50 HRC latch
Clip: removable, 1mm SUS420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, cardboard outer box, certificate with serial number and steel hardness test
Notes: Serial number 848 - Manufactured in 2022

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: 2015 specimen, like new
* Commercially available: Still in production
* Sharpening: Factory sharpened
* Marks on blade: No
* Marks on handle: None
* Box: Absent
* Scabbard: Present
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: All Rounder Utility

Production type: Industrial
Country of Production: USA
Blade: 420HC stainless steel engraved
Blade finish: mirror polish
Handle: wood and brass
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 220mm.
Thickness when closed: 16mm.
Weight: 205g.
Closure: Back Lock
Sheath: nylon sheath
Packaging: not present
Notes: previously purchased knife from private collection

Buck 560BT Black Nitride XLTi Titanium is a collectible folding knife manufactured in the United States in 1993. This distinctive model combines high-quality materials with functional design, making it a sought-after piece by both collectors and knife enthusiasts.

This item comes from a private collection and is in excellent condition, featuring a flawless blade and a perfectly preserved handle. Supplied with its original packaging and leather sheath, it represents a rare opportunity for true Buck aficionados.

Type: Previously Purchased
Condition: Excellent
Availability: Discontinued since the late '90s
Sharpening: Factory edge
Blade marks: None
Handle marks: None
Packaging: Complete, original cardboard box with manufacturer logos
Sheath: Cordura
Manuals, Certificates and Warranties: Warranty certificates included
Inspected and Certified: By our in-house lab

Intended use: Collection
Production type: Industrial
Country of manufacture: USA
Blade: 425M stainless steel
Blade finish: Black nitride
Handle: Titanium with black nitride finish
Blade length: 95 mm
Blade thickness: Not specified
Closed length: 107 mm
Total length: 219 mm
Closed thickness: Not specified
Weight: Not specified
Locking mechanism: Lockback
Clip: Not present; supplied with original Buck nylon sheath
Packaging: Original Buck box
Notes: Limited edition 1993; titanium handle with black nitride finish; includes original Buck nylon sheath

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Type: 2016 knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from packaging
* Commercial availability: Difficult to find
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and complete, with outer box
* Sheath: -
* Manuals, Certificates, and Warranty: Present and complete
Inspected and Certified by our internal laboratory

SHIN in Japanese means ‘trust’.

The SHIN is one of the largest folders in the Rockstead catalog and showcases all the typical and characteristic elements of the brand: aluminum handle with a pearl-radiant design, hardened anodization at 400 Vickers, and an insert of high-quality stingray leather (Samekawa).

This is a durable knife with strong cutting capabilities that maintains its edge for a long time. Even when used for rigorous cuts, the blade glides securely thanks to its particular sharpening.

The blade indeed has a HONZUKURI sharpening, convex on both sides, following the tradition of Japanese swords; this makes it both very sharp and sturdy, allowing it to cleanly cut a sheet of paper even after 1000 cuts through a very abrasive and resistant hemp rope.

A faithful companion for life, in which to place the utmost trust.

Blade: laminated stainless steel ZDP189 at 67HRC internally and VG10 at 61.7HRC externally
Handle: samekawa (genuine stingray leather) and aerospace-grade aluminum A6063S with black alumite treatment at 400Hv hardness
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 145g.
Lock: linerlock type, made of 402J2 steel at 50HRC
Clip: removable, made of 402J2 steel at 50HRC, with black alumite treatment at 400Hv
Notes: complete with warranty certificate and technical specifications

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: 2011 specimen, overall in very good condition.
* Commercially available: Still in catalog, but difficult to find.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: minimal marks given by time.
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Collection / Sporting

Production type: Midtech
Country of manufacture: Sakai - Japan
Blade: ZDP189 stainless steel at 66.3 HRC
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin 
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Specimen number #046 dated 07/13/2011, previously purchased, withdrawn from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of the box
* Commercially available: Still in catalog, but difficult to find.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Hunting/Light Utility

Production Type: Industrial
Country of Production: USA
Blade: stainless steel CPM-S35VN hardened by BOS
Blade finish: satin-finished
Handle: Micarta, with aluminum pommel and guard
Blade length: 152mm.
Blade thickness: 4.4mm.
Total length: 267mm.
Weight: 300g.
Scabbard: leather
Packaging: cardboard box with Buck logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new
* Commercially available: found.
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

The Compadre Camp Knife is the perfect ally for those who love adventure. With its 5160 steel blade and cobalt coating, it cuts with precision and stands up to any challenge. The sturdy and stylish Micarta handle provides a secure grip, making it ideal for the outdoors.

Intended Use: Bushcraft / Outdoor

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, made of 5160 steel at 57/58HRC hardened by BOS
Blade finish: Cobalt Cerakote
Handle: Natural Canvas Micarta
Blade length: 114mm.
Blade thickness: 3.8mm.
Total length: 241mm.
Weight: 199g.
Sheath: black leather
Packaging: cardboard box with Buck logos
Notes: previously purchased knife from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: In excellent, like-new condition
* Commercially available: Still in production
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Collection / Sporting

Production type: Midtech
Country of manufacture: Sakai - Japan
Blade: Hitachi YXR7 steel at 64 HRC
Blade treatment: Black Hard Anodized at Hv400 hardness
Handle: Duraluminum A7075 with anodized to Hv400 hardness
Blade length: 70mm.
Blade thickness: 3.3mm.
Length closed: 104mm.
Total length: 176mm.
Thickness when closed: 11.4mm.
Weight: 74g.
Opening: via ambidextrous pin 
Washers: steel
Closure: FrameLock with clapper made of SKD11 at 61HRC
Clip: removable, 1mm 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: serial number 338 - Production date 20/03/2019

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: in excellent, like-new condition
* Commercially available: In production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Collection / Sporting

Production type: Midtech
Country of manufacture: Sakai - Japan
Blade: stainless steel ZDP-189 at 66.6 HRC
Blade finish: mirror polish
Handle: Duraluminum A7075 with anodization to Hv400 hardness and Samekawa insert (genuine Breed leather)
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 145g.
Opening: via ambidextrous pivot 
Washers: steel
Closure: FrameLock with hinge made of 420J2 at 52HRC
Clip: removable, 1mm 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: serial number 054 - Date of manufacture 23/04/2019

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in good condition, some minor abrasion on clip and hardware
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: Small abrasions on clip and hardware.
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Collection / Sporting

Production type: Midtech
Country of manufacture: Sakai - Japan
Blade: Hitachi YXR7 steel at 64.7 HRC
Blade treatment: Black Titanium mirror coat
Handle: Duraluminum A7075 with anodizing to Hv400 hardness
Blade length: 70mm.
Blade thickness: 3.3mm.
Length closed: 104mm.
Total length: 176mm.
Thickness when closed: 11.4mm.
Weight: 74g.
Opening: via ambidextrous pin 
Washers: steel
Closure: FrameLock with clapper made of SKD11 at 61HRC
Clip: removable, 1mm 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: serial number 014 - Production date October 9, 2009

Higo is one of the most beloved models for Rockstead Knives fans around the world, and HIGOⅡX, with a custom Dark Matter Gold (DMG) carbon fiber coating and a titanium back layer, is one more step in the pursuit of perfection. The blade is made of ZDP189 super stainless steel and features a unique convexity with gradually reduced angle (30 degrees at the middle and 24 degrees at the tip). The variable blade angle is the result of Rockstead's long quest for superior sharpness and cutting ability.

Blade: ZDP-189 stainless steel at 66.7HRC
Handle: anodized titanium and Dark Matter Gold carbon fiber
Blade length: 89mm.
Blade thickness: 3.2mm.
Total length: 216mm.
Weight: 138g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Accompanied by warranty certificate with full technical specifications - Please note that the knife you receive will have a different serial number and production date than the model shown in the photographs.

With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.

Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.

Blade: ZDP189 rolled stainless steel at 66/67 HRC inside and VG10 at 60/61 HRC outside
Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
Blade length: 95 mm.
Blade thickness: 4 mm.
Overall length: 210 mm.
Weight: 145 g.
Lock: Liner Lock steel in 52HRC 402J2
Clip: Steel 402J2 to 52HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications. - Please note that the knife you receive will have a different serial number and production date than the model shown in the photographs.

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: in Hitachi YXR7 steel at 64HRC
Blade treatment: Black DLC mirror
Handle: A7075 Duralumin with Hv400 hardness anodizing
Blade length: 70mm.
Blade thickness: 3.3mm.
Length closed: 104mm.
Total length: 176mm.
Thick when closed: 11.4mm.
Weight: 74g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel of 1mm. with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: -

Blade: stainless steel ZDP-189 to 67.2HRC
Handle: Duralumin A2024 with anodized surface to HV400
Blade length: 73 mm.
Blade Thickness: 3.5 mm.
Overall length: 176 mm.
Weight: 172 g.
Lock: Frame Lock with a swing in SKD11 61HRC
Clip: Steel 402J2 to 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory



The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.

Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.


The best industrial knives currently in production are marketed under the Rockstead brand. Created by Katsumi Kitano, who has been making quality knives for more than 20 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in the level of innovation for the materials used and construction techniques.

Country of production: Japan
Type of production: midtech
Blade: Hitachi YXR7 steel at 64.8HRC with 3micron HPC coverage and hardness of Hv1800
Handle: Duralumin A2024 with surface anodizing and hardness of Hv400
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 130g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Serial number 005 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

The 117 Brahma Pro knife is a versatile tool designed for hunting and outdoor activities. It is often referred to as the 'mini 119 Special' because it shares the classic style of Buck's first fixed knives. The knife offers two main cutting options: the clip-shaped blade tip for precise and detailed work, and the middle part of the blade for sturdier and tougher tasks.

A notable feature of the 117 Brahma Pro is its traditional guard and pommel. These elements help ensure greater control and stability during use. In addition, the knife comes with a black genuine leather sheath that features a belt loop for convenient and accessible carrying.


Intended use: Hunting / Light Utility

Production type: Industrial
Country of manufacture: USA
Blade: BOS hardened CPM-S35VN stainless steel
Blade finish: Satin finish
Handle: Micarta, with aluminium pommel and guard
Blade length: 114mm.
Blade thickness: 3.3mm.
Total length: 222mm.
Balance: on the guard branch
Weight: 139g.
Sheath: Black leather
Packaging: Cardboard box with Buck logos
Notes: -

Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.

Intended Use: Collection/Sportsman

Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpening - Please note that the knife you receive will have a different serial number and production date than the model shown in the photographs.

COUTEAU DE RETRAITE PROVENANT D'UNE COLLECTION PRIVÉE - Modèle Buck 120 datant des années 90
* Type : déjà acheté
* Etat : en excellent état, comme neuf
* Disponible dans le commerce : disponible dans le commerce dans les versions les plus récentes
* Affûtage : Original
* Marques sur la lame : non
* Marques sur le manche : non
* Boîte : sans boîte
* Gaine : gaine en cuir noir d'origine
* Manuels, certificats et garanties : -
* Contrôlé et certifié par notre laboratoire interne

Utilisation prévue : Tactique

Type de production : Industrielle
Production Lama : États-Unis
Lame : acier inoxydable 420HC
Traitement de la lame : -
Manche : en Polymères
Longueur de la lame : 185 mm.
Épaisseur de la lame : 4,5 mm.
Longueur fermée : -
Longueur totale : 300 mm.
Epaisse fermée : -
Équilibrage : -
Poids : 228 grammes.
Fermeture: -
Agrafe: -
Fourreau : en cuir noir
Emballage: -
Noter: -

We always prioritize reliability and ease of use.

Its light weight and deep carry clip means you'll always have the Z200 by your side. If you prefer a controlled two-handed opening the Z200 is made for you. We milled a groove into the Sleipner steel blade that allows for easy and discreet opening.

Intended Use: EDC / Sporty

Production type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 102g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush mounted, stainless steel with Black DLC finish
Package: Cardboard box with ANV logos
Notes: At the base of the blade groove there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife.

We always prioritize reliability and ease of use.

Its light weight and deep carry clip means you'll always have the Z200 by your side. If you prefer a controlled two-handed opening the Z200 is made for you. We milled a groove into the Sleipner steel blade that allows for easy and discreet opening.

Intended Use: EDC / Sporty

Production type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Stonewashed
Handle: Aluminum 6061-T6
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 102g.
Closing System: FrameLock
Clip: deep pocket, removable and reversible, flush stainless steel with Black DLC finish
Package: Cardboard box with ANV logos
Notes: At the base of the groove of the blade there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife.

Timeless simplicity is the main reason why you will never get tired of your Z100.

In our daily lives we look for things that become part of us, things that we will keep with us every day without even having to think about it. Thanks to the deep pocket clip, you won't even know you have it with you until the right moment comes. Then, as soon as you use it, you'll appreciate the flipper opening and sleipner steel blade.

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Stonewashed
Handle: Aluminum 6061-T6
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 95g.
Closing System: FrameLock
Clip: deep pocket, removable and reversible, flush stainless steel with Black DLC finish
Package: Cardboard box with ANV logos
Notes: at the base of the flipper there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife

Timeless simplicity is the main reason why you will never get tired of your Z100.

In our daily lives we look for things that become part of us, things that we will keep with us every day without even having to think about it. Thanks to the deep pocket clip, you won't even know you have it with you until the right moment comes. Then, as soon as you use it, you'll appreciate the flipper opening and sleipner steel blade.

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Black DLC
Handle: G-10
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 95g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush stainless steel with Black DLC treatment
Package: Cardboard box with ANV logos
Notes: at the base of the flipper there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife

Confident elegance complemented by aristocratic lines gives the Z400 its well-deserved dominance over the rest of our folding knives.

A dagger-style, single-edged spear point blade made from Sleipner steel and equipped with a double guard that allows for an aggressive opening at the edge of the pocket when drawing or the ability to use it as a flipper system. Rounding out the package is an extremely durable, lightweight handle made of G10 composite with a secure liner lock and a deep pocket clip. All of this is designed in combination with a sense of elegance and simplicity. This is the Z400.

Intended use: EDC / Sporting

Production Type: Industrial
Country of Production: Czech Republic
Blade: Sleipner 58HRC steel
Blade Finish: Black DLC
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total length: 230mm.
Weight: 110g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush, in Black DLC stainless steel
Package: Cardboard box with ANV logos
Notes: -

Confident elegance complemented by aristocratic lines gives the Z400 its well-deserved dominance over the rest of our folding knives.

A dagger-style, single-edged spear point blade made from Sleipner steel and equipped with a double guard that allows for an aggressive opening at the edge of the pocket when drawing or the ability to use it as a flipper system. Rounding things out is an extremely durable, lightweight handle made of G10 composite with a secure liner lock and a deep pocket clip. All of this is designed in combination with a sense of elegance and simplicity. This is the Z400.

Intended use: EDC / Sporting

Production Type: Industrial
Country of Production: Czech Republic
Blade: Sleipner 58HRC steel
Blade Finish: Stonewashed
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total length: 230mm.
Weight: 110g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush mounted
Package: Cardboard box with ANV logos
Notes: -

Being reliable isn't easy.

If you want to be taken seriously, you have to perform over and over again. The new A200 was born to do just that; thanks to its lightweight yet durable construction, you'll almost forget you have it. Being fully ambidextrous and super safe at all times, the new A200 is the perfect EDC for your every day adventures.

Intended Use: EDC / Sporty

Production type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 60HRC
Blade Finish: Black DLC
Handle: G-10 with spacers and red anodized aluminum opening pin
Blade length: 88mm.
Blade thickness: 3mm.
Total length: 210mm.
Weight: 81g.
Closing System: Ambidextrous A-Lock.
Clip: deep pocket, removable and reversible, flush, in Black DLC stainless steel
Package: Cardboard box with ANV logos
Notes: -

How far can you go on the path of minimalism?

The elegance of a single piece of Sleipner steel, precision machined and ground to produce a reliable tool. The P100 was conceived as a staple of any personal EDC set where everything unnecessary has been removed. With its low weight and ultra-thin profile scabbard, the P100 can be exactly what you need at all times. Anytime, anywhere.

Intended use: hiking / light utility / neck knife

Production type: Industrial
Blade production: Czech Republic
Blade: Full tang, Sleipner 58HRC steel
Blade finish: Stonewashed
Handle: Paracord
Blade length: 75mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 62g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos.
Notes: Possibility to use it as neck knife.

How far can you go on the path of minimalism?

The elegance of a single piece of Sleipner steel, precision machined and ground to produce a reliable tool. The P100 was conceived as a staple of any personal EDC set where everything unnecessary has been removed. With its low weight and ultra-thin profile scabbard, the P100 can be exactly what you need at all times. Anytime, anywhere.

Intended use: hiking / light utility / neck knife

Production type: Industrial
Blade production: Czech Republic
Blade: Full tang, Sleipner 58HRC steel
Blade finish: Stonewashed
Handle: Paracord
Blade length: 75mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 62g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos.
Notes: Possibility to use it as neck knife.

A simple knife that isn't afraid of rough treatment.

Sometimes you need to have a longer blade with you, whether you need to go fishing or make firewood. The P300 is a true universal workhorse that's always at your side thanks to its massive Sleipner steel blade with fantastic cutting performance. But a good tool also needs a reliable and secure handle and in our case this is guaranteed by a G10 composite handle with a rough finish and three massive screws that hold it all together for maximum performance.

Intended use: hiking / utility

Manufacturing Type: Industrial
Blade production: Czech Republic
Blade: full tang, in Sleipner 58HRC steel
Blade Finish: Stonewashed
Handle: G-10
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 270mm.
Weight: 255g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos
Notes: -

We don't know where your next expedition will take you, but one thing's for sure: there's nothing more important than reliable, quality gear. In designing our flagship P500, we combined the seemingly incompatible. We ground the high-quality Swedish Sleipner steel blade at two different angles. Near the handle is a high sharpness suitable for normal cutting and finer work, while the front has a very durable low, bellied sharpness that shifts the knife's center of gravity significantly toward the tip allowing you to use it on hardwoods and materials with great power. For safe and controlled work, the back of the "five hundred" handle also widens significantly which, in combination with the grippy G10 composite surface, forms a secure and comfortable grip. 

Intended use: hiking / utility

Type of production: Industrial
Blade production: Czech Republic
Blade: Full tang, made of Sleipner 58HRC steel
Blade Finish: Stonewashed
Handle: G-10
Blade length: 190mm.
Blade thickness: 5mm.
Total length: 330mm.
Weight: 377g.
Scabbard: Black leather
Package: Cardboard box with ANV logos
Notes: -

We developed the M311 SPELTER knife in collaboration with members of advanced aerial observation units, close protection teams and special air operations. During the development of the knife we focused on using their experience and needs. Thanks to this unique cooperation, we had the opportunity to truly verify the quality of the chosen materials, design and overall construction of the product. The knife has been tested for a long period in extreme environments and various climates, including the hot, dry and humid areas of Asia, as well as the icy areas beyond the polar circle.

Intended Use: tactical / military / collection

Type of production: Industrial
Blade production: Czech Republic
Blade: full tang, stainless steel Elmax 60HRC
Blade Finish: Black DLC
Handle: Micarta
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 275mm.
Weight: 286g.
Sheath: Kydex, thermoformed, with double MOLLE compatible loop.
Package: Cardboard box with ANV logos
Notes: -

Intended use: tactical / military / collection

Production type: Industrial
Blade production: Czech Republic
Blade: full tang, Sleipner steel 59HRC
Blade Finish: Black DLC
Handle: G-10
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 265mm.
Weight: 308g.
Sheath: Kydex, thermoformed, with double MOLLE compatible loop.
Package: Cardboard box with ANV logos
Notes: -

M73 Kontos incorporates all the basic components of Acta Non Verba's M-line knives. It has a carefully contoured full tang design and a lightweight handle for perfect balance. Its blade is made of Swedish Sleipner steel coated with Cerakote, with a 3D machined micarta handle. The M73 KONTOS is clearly recognizable by its hexagonal pommel, machined from an original track stop from a T-72M tank. It comes with a self-locking Kydex scabbard accompanied by a pair of spring compatible clips.

Intended use: tactical / military / collection

Manufacturing Type: Industrial
Blade production: Czech Republic
Blade: Full tang, Sleipner steel 58HRC
Blade Finish: Cerakote
Handle: Micarta
Blade length: 125mm.
Blade thickness: 3mm.
Total length: 265mm.
Weight: 228g.
Sheath: Kydex, thermoformed, with double MOLLE compatible loop.
Package: Cardboard box with ANV logos
Notes: The design of the knife is inspired by the T72M tank supplied to the former Czechoslovakian army in the 80's - The length of the blade has the same diameter as the caliber of the tank cannon - The hexagonal pommel of the knife is made using the original fasteners of the tracks of the T-72M tanks.

Intended use: Tactical / Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang, in 5160 carbon steel
Blade finish: Cerakote
Handle: Micarta
Blade length: 254mm.
Total length: 406mm.
Balancing: Advanced
Weight: 655g.
Sheath: Nylon and Polyester
Packaging: Cardboard box with Buck logos
Note: -

This knife blade is convex on both sides in the tradition of the highly praised Japanese sword. This shape is both sharp and strong, and can still slice cleanly through a sheet of paper even after the punishment of chopping and cutting through dried bamboo. Using this special blade shape is an excellent way of allowing an edge to be thick without sacrificing any of its sharpness. This knife is of preeminent sharpness. This is a durable knife with strong cutting capabilities that will last for a long time. Even when used for rigorous cutting, the blade will not bite or catch thanks to its convex shape. Other knives will often bite or catch, and may acquire nicks if pulled out suddenly.

Blade: XR-7 steel at 64.3 HRC with DLC treatment
Handle: Same (real breed leather) and aeronautical aluminum with Hv400 black alumite treatment
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closing: Liner Lock in 402J2 steel at 52HRC
Clip: in 402J2 steel at 52HRC
Notes: Accompanied by a warranty certificate with technical specifications.

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: anodised titanium and carbon fiber
Blade length: 89mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 133g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Please note that the knife you receive will have a different serial number and production date than the model shown in the photographs.

This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.

Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: Folder

Intended use: Sports / EDC

Type of production: Industrial
Production Lama USA
Blade: CPM-S30V stainless steel
Blade treatment: nitriding Titanium
Handle: G-10
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed Length: 112mm.
Overall length: 190mm.
Thick when closed: 11mm.
Balancing: -
Weight: 134g.
Lock: Liner Lock
Clip: Reversible and removable, stainless steel
Sheath: -
Packaging: cardboard box with Buck logos
Notes: Hardened by Paul Bos

Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.

Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.

Lama: acciaio laminato con guance esterne in VG10 e tagliente in ZDP-189 a 66/67HRC con finitura a specchio
Manicatura: Titanio anodizzato
Lunghezza lama: 105 mm.
Spessore della lama: 3,8 mm.
Lunghezza totale: 190 mm.
Peso: 159g.
Chiusura: Frame Lock con battente in acciaio inox
Clip: Deep pocket, amovibile, in acciaio inox SUS420J2 a 50HRC
Note: Design by Sinkevich - accompagnato da certificato di garanzia con specifiche tecniche dettagliate

Rockstead - SAI Titanium ZDP-189 - knife

Blade: ZDP-189 in 66.8HRC
Handle material: titanium
Blade length: 80 mm.
Blade Thickness: 3.7 mm.
Overall length: 190 mm.
Weight: 140g.
Closure: liner lock
Sheath: Black leather
Notes: Accompanied by a certificate of guarantee with the technical specifications.

Rockstead - Higo-X-IW - Ironwood ZDP-189 - knife

With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.

Blade: ZDP-189 in 66.8HRC
Handle material: stainless steel and wood SUS420J2 Ironwood
Blade length: 90 mm.
Blade Thickness: 3 mm.
Overall length: 215 mm.
Weight: 133g.
Lock: Frame Lock with swing SKD11 to 61HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

Rockstead - Chu DLT - knife

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.

Blade: Stainless steel with 64HRC Hitachi YXR7 to cover DLT571 3micron
Handle: in green paracord
Blade length: 120mm.
Blade Thickness: 6mm.
Overall length: 2150mm.
Weight: 284g.
Balancing: 1cm back from the lower branch of the guard
Sheath: Leather
Note: Product is out of print

Originally produced in 1967 as a combat model, and also used during the Vietnam conflict, the model 124 becomes discontinuous since 1997 only to be revived by Buck in the Heritage Collection 2012/2013 in a limited edition of only 700 copies. It is distinguished by the full tang blade and the handle in black linen micarta.

Intended Use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Full tang, stainless steel 420HC
Treatment Blade: -
Handle: Micarta
Blade length: 159mm.
Blade thickness: 4.5mm.
Length closed: -
Overall length: 300mm.
Thick when closed: -
Balancing: -
Weight: 377g.
Closure: -
Clip: -
Sheath: Black Leather
Packaging: Cardboard box with logos Buck
Notes: Limited Edition Heritage Collection 2012/2013 with a print run of only 700 copies

Buck - Hunt Foldover 11100 - knife

Intended use: Sport

Type of production: Industrial
Production Lama USA
Blade: stainless steel 420HC
Treatment Lama: -
Handle material: wood and alpaca
Blade length: 95mm.
Blade thickness: 3mm.
Closed Length: 122mm.
Total length: 215mm.
Thick when closed: 16mm.
Balance: -
Weight: 210g.
Closure: Back Lock
Clip: -
Sheath: leather sheath
Packaging: cardboard box with logos Buck
Notes: -

Intended use: Sport

Type of production: Industrial
Production Lama USA
Blade: stainless steel 420HC
Treatment Lama: -
Handle material: wood and alpaca
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Total length: 185mm.
Thick when closed: 13mm.
Balance: -
Weight: 160g.
Closure: Back Lock
Clip: -
Sheath: leather sheath
Packaging: cardboard box with logos Buck
Notes: -

Intended use: Sport

Type of production: Industrial
Production Lama USA
Blade: Stainless steel Aus-6
Treatment Lama: -
Handle material: aluminum
Blade length: 72mm.
Blade thickness: 2.5mm.
Length closed: 104mm.
Total length: 180mm.
Thick when closed: 9mm.
Balance: -
Weight: 76g.
Lock: Liner Lock
Clip: Reversible and removable steel
Sheath: -
Packaging: cardboard box with logos Buck
Notes: -

Intended Use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPM-S30V by Bos
Treatment Blade: Stonewashed
Handle material: titanium
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Thick when closed: 10mm.
Balance: -
Weight: 76g.
Closure: Frame Lock
Clip: Reversible and removable titanium
Sheath: -
Packaging: cardboard box with logos Buck
Notes: Hardened by Paul Bos - wooden box

Destinazione d'uso: caccia/collezione

Tipo di Produzione: industriale
Lama: in acciaio inox 420HC
Produzione Lama: USA
Manicatura: Nylon e gomma Dynafle
Lunghezza lama: 130mm.
Spessore della lama: 6mm.
Lunghezza totale: 260mm.
Bilanciatura: arretrata, ad 1cm. dal ramo di guardia
Peso: 262g.
Chiusura: -
Clip: -
Fodero: in nylon nero compatibile con sistema M.O.L.L.E.
Confezione: scatola di cartone 
Note: 

Collaboration between TOPS and BUCK for this CSAR-T 095, designed as a heavy-duty pocket knife for use by military professionals.

The shape of the blade is "modified tanto." This means that the traditional angle of a tanto blade is slightly curved. It is extremely strong, with a thickness of 4.4 mm and a weight of 247 grams.

The ring at the end of the handle can be used as a screwdriver, using the tool kit already provided, and + it is possible to use standard drill bits that also fit the drill. The included nylon sheath is MOLLE compatible, but can also be worn on a belt.




Intended use: Sporting / Multi-role / Military

Blade: stainless steel ATS-34
Country of manufacture: USA
Handle: G-10 with titanium liners
Blade length: 87mm.
Blade thickness: 4.5mm.
Length closed: 120mm.
Total length: 210mm.
Weight: 244g.
Closure: Liner Lock
Clip: removable stainless steel
Sheath: Nylon
Packaging: Unboxed/packaged, sold loose with its own sheath the screwdriver kits
Notes: Hardened by BOS - Screwdriver and extension set included

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory

Intended use: Sports / EDC

Type of production: Industrial
Blade production: USA
Blade: 420HC stainless steel
Handle: G-10
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 112mm.
Total length: 190mm.
Closed thickness: 11mm.
Balancing: -
Weight: 122g.
Closure: Liner Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging:
Notes: Concave sharpening - opening via Carson Flipper system

Blade: Hitachi YXR7 64.8HRC steel with 3micron HPC cover - Hv1800
Handle: Duralumin A2024 with surface anodization at Hv400
Blade length: 90 mm.
Blade thickness: 3.5 mm.
Overall length: 215 mm.
Weight: 100 g.
Closing: Frame Lock with SKD11 to 61HRC
Clip: 402J2 steel to 48HRC
Notes: Accompanied by a certificate of guarantee with technical specifications.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: aluminum
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 102g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 1039 - Date of production 31 May 2019

Rockstead - About HPC - knife

With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.

Blade: stainless Hitachi YXR7 to 64.8HRC coverage HPC 3micron - Hv1800
Handle material: Duralumin A2024 with anodized surface to HV400 and skin of Breed
Blade length: 82 mm.
Blade Thickness: 4 mm.
Overall length: 189 mm.
Weight: 100 g.
Lock: Liner Lock 402J2 steel at 52HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.