Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
CRKT - M16-12LE knife Small Law Enforcement Tanto - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: small marks on tip
* Marks on handle: clip slightly marked
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryBlade: Teflon-coated AUS-8 high-carbon 57/58HRC stainless steel
Handle: Zytel grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Total length: 185mm.
Weight: 97g.
Closure: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety catchAP-CM16-12LE -
CRKT - P.S.D. II (Particle. Separation. Device.) by Hammond - AUS-10 & Brown G10 - 7910 - knife
Jim Hammond's original P.S.D. earned its name (Particle. Separation. Device.) for its ability to cut anything, anywhere. The P.S.D. II brings that same capability to a smaller, more portable folding knife, reducing the overall length by more than an inch. The blade is made of corrosion-resistant AUS10 with assisted opening on IKBS ball bearings that ensure quick and easy one-handed operation.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade Treatment: Black Oxide
Handle: G10
Blade Length: 76mm.
Blade thickness: 2.8mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 102g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC7910 -
CRKT - A.B.C. (All. Bases. Covered.) by Hammond - 12C27 & Black G10 - 2606 - knife
Jim Hammond's A.B.C. (All. Bases. Covered.) makes its return in an even more versatile form. It is now a folder, bringing the varied capabilities of the original fixed blade into a more convenient and compact design. With its assisted opening and IKBS pads, it's always ready for action at any time, while the G10 handle provides a strong grip even in adverse weather conditions.
Intended Use: Tactical
Production Type: Industrial
Country of Production: China
Blade: Sandvik 12C27 stainless steel
Blade treatment: Black Oxide
Handle: G10
Blade Length: 85.9mm.
Blade thickness: 3.1mm.
Length closed: 116mm.
Total length: 203mm.
Weight: 110g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC2606 -
CRKT - Pilar Large - Blackwashed Frame Lock Flipper by Vox - 5315KS - folding knife
Intended use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Blackwashed
Handle: Blackwashed stainless steel
Blade length: 67.8mm.
Blade thickness: 3.8mm.
Length closed: 101.5mm.
Total length: 170mm.
Weight: 119g.
Closure: Frame Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5315KS -
CRKT - Overland Compact Knife by T. J. Schwarz - 6277 - knife
The compact folding knife ready to tackle any terrain.
It may be small, but just like the upgraded 4x4 vehicles that inspired its name, the Overland Compact is exaggeratedly built and ready to tackle the toughest conditions. It takes the design cues and materials of the full-size Overland and puts them into an ultraportable format that practically disappears into a pocket. When it's time to stop the convoy and set up camp, this knife can prepare light food and chop up the perfect marshmallow stick.
Intended Use: Sporty
Production type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Blackwashed
Handle: G10 and Blackwashed stainless steel
Blade Length: 57mm.
Blade thickness: 3.2mm.
Length closed: 81mm.
Total length: 137mm.
Weight: 88g.
Closure: FrameLock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by T. J. SchwarzC6277 -
CRKT - Squid Compact by Lucas Burnley - 2485K - knife
This small knife is a big deal. The Squid is known as the perfect knife for everyday use, expertly combining simplicity, usability and performance.
Neither brash nor flashy, it is the humble handyman of the knife world: reliable, solid and extraordinarily capable. Now, renowned designer Lucas Burnley has reworked it into a smaller, nimbler version, the Squid Compact. This reasonably priced folding knife is for everyone.
* Assisted opening: The assisted flipper allows rapid blade opening.
* Smooth opening: The IKBS™ ball bearing system ensures maximum smoothness.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily
* Maximum control: Grooves on the back of the blade to ensure a secure and comfortable grip
* Maximum durability: Stainless steel handle withstands heavy use.
* Low profile: Pocket clip ensures safe carrying
* Accessory options: Hole for lanyard or key ring
Intended Use: EDC
Production type: Industrial
Country of manufacture: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: BlackWashed
Handle: BlackWashed stainless steel
Blade Length: 44mm.
Blade thickness: 2.6mm.
Length closed: 74mm.
Total length: 118mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS opening system on pinball-type bearings, spring preload assistedC2485K -
CRKT - Tuna Compact by Lucas Burnley - 2522 - knife
The little fish that rules every pond. Though small, the Tuna Compact evokes the power of one of the world's largest and fastest fish.
It takes the subtle elegance of designer Lucas Burnley's original Tuna and shrinks it into an ultra-compact folding knife. With a profile that suggests strong forward momentum and a blade shape that resembles a deep-sea carnivore, this everyday knife slices through packs and boxes faster than a bluefin tuna slices through waves on a taut line.
* Smooth opening: IKBS™ ball-bearing motion allows for a smooth blade opening.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily.
* Easy opening: The thumb engagement pin allows for quick one-handed opening.
* Exceptional grip: G10 handle provides exceptional grip in all conditions
* Brute force: Fame Lock system uses a thick locking bar to hold the blade in place
* Low profile: Pocket clip ensures safe and secure carrying away from prying eyes
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: StoneWashed
Handle: G10 and BlackWashed stainless steel
Blade Length: 69mm.
Blade thickness: 3.6mm.
Length closed: 97mm.
Total length: 163mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS ball bearing opening systemC2522 -
CRKT - CEO MicroFlipper Sheepfoot by Rogers - 7083 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 56mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 140mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7083 -
CRKT - CEO MicroFlipper Drop Point by Rogers - 7081 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 60mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 143mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7081 -
CRKT - Clever Girl Kukri Knife - 2710 - Machete
Intended Use: Hiking / Heavy Duty
Production Type: industrial
Blade: Full Tang in carbon steel SK-5 with Black Powder treatment
Country of Production: Taiwan
Handle: G-10
Blade Length: 196mm.
Blade thickness: 4.8mm.
Total length: 336mm.
Balance: Advanced
Weight: 402g.
Sheath: thermoplastic
Packaging: cardboard box with CRKT logos
Notes: Design by Austin McGlaunCR2710 -
CRKT - Folts Minimalist Drop Point Black - 2384K - Knife
Intended Use: Neck Knife
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 55mm.
Blade thickness: 2.6mm.
Total length: 133mm.
Weight: 49g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan FoltsCR2384K -
CRKT - Carson M16-13DSFG Tan Special Forces - PRIVATE COLLECTION - pocket knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks on Tan-colored finish, unnoticeable
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: China
Blade: Stainless steel AUS-8
Blade Finish: Tan Oxide
Handle: PVD steel folders with G10 Tan grips
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 150g.
Opening: Carson Flipper system
Closure: Liner Lock with auto LAWKS security system
Clip: multi-position, removable, Black Oxide stainless steel
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemM16-13DSFG-CP -
CRKT - Techliner Super Shorty - TPENBOND2 - tactical pen
The Techliner™ Super Shorty pen is built to impress with a sleek, ergonomic body and magnetic ends that attach securely to whiteboards, desk legs and workbenches so it's always within reach.
Secure cap: Magnetic ends secure the cap and attach to surfaces
Strong and lightweight: Aluminum handle combines strength with minimal weight
Visually appealing: Blue anodized body
Compact size: Easy to carry
Write anywhere: Ink cartridge developed for extreme environmental conditionsMaterial: 6061 anodized aluminum with stainless steel clip
Rear base: Magnetic
Ink: Black with pressurized Schmidt Refill
Total length: 105mm.
Diameter: 11.7mm.
Weight: 19.8gTPENBOND2 -
CRKT - Freya by Elmer Roush - 2749 - Viking Axe
Intended Use: Sporting / Hiking
Production type: Industrial
Country of Production: Taiwan
Blade: Carbon steel 1055
Blade treatment: manganese phosphate
Handle: Walnut wood
Blade length: 88mm.
Blade thickness: 32mm.
Total length: 483mm.
Weight: 870g.
Scabbard: -
Notes: Design by Elmer RoushCR2749 -
CRKT - Berserker by RMJ Tactical - 2736 - Viking Axe
Intended Use: Sporting / Hiking
Production type: Industrial
Country of Production: Taiwan
Blade: Carbon steel 1055
Blade treatment: manganese phosphate
Handle: Walnut wood
Blade length: 118mm.
Blade thickness: 40mm.
Total length: 483mm.
Weight: 940g.
Scabbard: -
Notes: Design by by Ryan Johnson of RMJ TacticalCR2736 -
CRKT - Compano Carabiner by Bond - 9082 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15Mov
Blade finishing: Satin finish
Handle: 2Cr13 stainless steel with blackwash and bronze finish
Blade length: 37mm.
Blade thickness: 3.6mm.
Length closed: 82mm.
Total length: 117mm.
Weight: 62g.
Closure: Slipjoint
Clip: -
Package: Cardboard box with CRKT logos
Notes: Design by Mike Bond - Snap hook for attachment - Bottle openerCR9082 -
CRKT - Folts Minimalist Cleaver Blackout - 2383K - Knife
Intended Use: Neck Knife
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 54mm.
Blade thickness: 2.6mm.
Total length: 129mm.
Weight: 48g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan FoltsCR2383K -
CRKT - Pilar III by Vox - 5317 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: G10 and stainless steel with aluminum spacer
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 108mm.
Total length: 182mm.
Weight: 102g.
Closure: FrameLock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5317 -
CRKT - Carson M16-03BK - Bronze & Black Oxide - knife
Intended Use: Sporting / Tactical
Production Type: Industrial
Country of Production: China
Blade: Stainless steel 12C27 Sandvik
Blade treatment: Black Oxide
Handle: Stainless steel 2CR13 with nitriding in Bronze
Blade Length: 90mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 108g.
Opening: Carson Flipper system
Closure: Frame Lock
Clip: Multi-position, removable, in Black Oxide stainless steel
Package: Cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemCM16-03BK -
CRKT - CEO Bamboo by Rogers - 7096YGK - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: Nylon reinforced with fiberglass
Blade length: 79mm.
Blade thickness: 2.2mm.
Length closed: 113mm.
Total length: 194mm.
Weight: 59g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - IKBS ball bearing opening system - Winner of the 2019 Blade Show as "Best Buy Of The Year"C7096YGK -
CRKT - Tuna Knife by Burnley - 2520 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr14Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: G10 and Blackwashed stainless steel
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 114mm.
Total length: 195mm.
Weight: 105g.
Closing: FrameLock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas BurnleyC2520 -
CRKT - Piet by Vox - 5390 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass with anodized titanium spacer
Blade length: 68mm.
Blade thickness: 3.3mm.
Length closed: 95mm.
Total length: 164mm.
Weight: 71g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5390 -
CRKT - Pilar Large by Vox - 5315G - folding knife
Destination of use: Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin
Handle: Stainless Steel
Blade length: 67mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 170mm.
Weight: 98g.
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5315G -
CRKT - Hi Jinx Z by Ken Onion - K281KXP - PRIVATE COLLECTION - Pocket Knife
KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: like new
* Commercially available: discontinued
* Sharpening: factory sharpened
* Marks on the blade: None
* Marks on the handle: None
* Box: Present
* Scabbard: /
* Manuals, certificates and warranties: Available
* Tested and certified by our in-house laboratory.Intended Use: Sporting
Production Type: Industrial
Country of manufacture: China
Blade: Stainless steel 1.4116
Blade finish: Satin surface
Handle: GFN nylon
Blade length: 84 mm.
Blade thickness: 2.3 mm.
Length closed: 120 mm.
Total length: 203 mm.
Weight: 139 g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard box with CRKT logo
Notes: Ball bearing opening with IKBS system - Opening via Carson pinball system - Design by Ken OnionCK281KXP -
CRKT - Pilar by Vox - 5311 - folding knife
Intended use: Sports / EDC
Type of production: Industrial
Production Country: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: Stainless Steel
Blade length: 61mm.
Blade thickness: 3.5mm.
Closed Length: 90mm.
Overall length: 151mm.
Weight: 119g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5311 -
CRKT - Ken Onion Hootenanny - K300KXP - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Lama: Satin
Handle: Stainless steel 2Cr13 and grips FRN
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 116mm.
Overall length: 201mm.
Thick when closed: -
Balancing: -
Weight: 136g.
Closure: Frame Lock Stainless Steel 2Cr13
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design Ken Onion, opening system with ball bearing type IKBS opening type Carson FlipperCK300KXP -
CRKT - Burnley Squid - 2490 - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Blade: Stonewashed
Handle: Stainless Steel 2Cr13
Blade length: 54mm.
Blade thickness: 3mm.
Closed Length: 55mm.
Overall length: 114mm.
Thick when closed: 14mm.
Balancing: -
Weight: 96g.
Closure: Frame Lock Stainless Steel 2Cr13
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design Lucas BurnleyC2490 -
CRKT - Carson M16-12ZLEK Law Enforcement Zytel Folding Tanto - knife
Blade: Stainless steel AUS-8 high-carbon 57 / 58HRC Teflon
Handle: Zytel Grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Overall length: 185 mm.
Weight: 102 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety locks and AutoLAWKS guard Carson Flipper tagliacinture with integrated rear window breakerCM16-12ZLEK -
CRKT - Chanceinhell by Ken Onion - K910KKP - Machete
Destinazione d'uso: Escursionismo/Heavy Duty
Tipo di Produzione: industriale
Lama: in acciaio al carbonio 65Mn a 54/56 HRC con trattamento Black Powder
Produzione Lama Cina
Manicatura: Polimeri TPR e Nylon
Lunghezza lama: 304mm.
Spessore della lama: 2.5mm.
Lunghezza totale: 450mm.
Bilanciatura: avanzata
Peso: 490g.
Chiusura: -
Clip: -
Fodero: in Nylon
Confezione: scatola di cartone con loghi CRKT
Note: Design by Ken OnionCK910KKP -
CRKT - M16-04Z by Kit Carson - knife
Intended use: Sport
Type of production: Industrial
Production Blade: Taiwan
Blade: AUS-8 stainless steel
Treatment Lama: -
Handle: Zytel
Blade length: 94mm.
Blade thickness: 3.5mm.
Closed Length: 134mm.
Total length: 230mm.
Thick when closed: 17mm.
Balance: -
Weight: 182g.
Lock: Liner Lock locking system with self-LAWKS
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: -CM16-04Z -
Citadel - Fidel Buffalo Slipjoint Knife - 207CR - handmade knife
Intended use: collectible/sporting
Type of production: Handcrafted
Blade Production: Cambodia
Blade: DNH7 carbon steel selective hardening 40/60HRC
Blade Finish: mirror polished
Handle: water buffalo horn
Blade length: about 80mm.
Blade thickness: about 3mm.
Length closed: about 113m.
Total length: about 190mm.
Thickness when closed: about 17mm.
Balance: -
Weight: about 58g.
Closure: -
Clip: -
Sheath: leather pouch
Packaging: -
Notes: each knife is handmade and differs minimally in size, weights and aestheticsCI-207CR -
CRKT - Carson M16-14SFG - Special Forces Big Dog G10 knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr14MoV to 58-60 HRC
Blade treatment: Ti-Ni
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 135mm.
Total length: 235mm.
Thick when closed: 17mm.
Balancing: -
Weight: 180g.
Closure: Liner Lock with auto-LAWKS locking system
Clip: stainless steel
Sheath: -
Packaging: cardboard box with CRKT logos
Note: -CM16-14SFG -
CRKT - Folts Minimalist Bowie - 2387 - Coltello
Destinazione d'uso: Neck Knife
Tipo di produzione: Industriale
Produzione Lama: China
Lama: in acciaio inox 5Cr15MoV 55/57HRC
Trattamento Lama: -
Manicatura: Micarta
Lunghezza lama: 54mm.
Spessore lama: 2.7mm.
Lunghezza chiuso: -
Lunghezza totale: 130mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 45g.
Chiusura: -
Clip: -
Fodero: Nylon
Confezione: Scatola di cartone con loghi CRKT
Note: Design dy Alan FoltsC2387 -
CRKT - Ripple Black Liner Lock by Ken Onion - K415KXP - Coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Paese di produzione: China
Lama: In acciaio inox 8Cr14MoV
Finitura lama: Satinatura
Manicatura: Alluminio Aeronautico
Lunghezza lama: 80mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 110mm.
Lunghezza totale: 185mm.
Spessore da chiuso: 8mm.
Peso: 66g.
Chiusura: Liner Lock
Clip: amovibile, in acciaio inox
Confezione: scatola in cartone con loghi CRKT
Note: Versione First Production Run - Sistema di apertura IKBS (Ikoma Korth Bearing System) su cuscinetti a sfera - Design by Ken Onion3803 -
CRKT - Carson knife M21-14SFG - Special Forces - knife
Intended use: Tactical/Military
Blade: AUS-8 56/58HRC stainless steel
Taiwan blade production
Handle: Aluminum
Blade length: 100mm.
Blade thickness: 3.5mm.
Closed length: 135mm.
Total length: 235mm.
Balancing: -
Weight: 155g.
Closure: Liner Lock
Clip: removable and reversible in stainless steel
Scabbard: -
Notes: design by Carson - AutoLAWKS safety catchM21-14SFG -
CRKT - First Strike - Large Tactical Knife 2706 Tanto - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in excellent condition
* Commercially available: No
* Sharpening: Original
* Marks on blade: NO
* Signs on handle: NO
* Packaging: NO
* Sheath: in plastic material
* Manuals, Certificates and Guarantees: NO
* Checked and Certified by our internal laboratory
Blade: AUS-8 high-carbon 57/58HRC stainless steel
Handle: in cotton with stingray skin insert
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 290mm.
Weight: 322g.
Sheath: plastic material
Note:CRKT-AP-2706 -
CRKT - Provoke EDC Knife - 4050 - knife
The Provoke® EDC takes the powerful Kinematic™ technology of the original Provoke® karambit and applies it to a "standard" folding knife that is flexible in more ways than one. For all those who wanted the Kinematic™ opening but didn't need a karambit, you can now use the same innovative technology in a knife designed for everyday use. The Provoke® EDC features a new flat edge blade made of D2 steel (providing excellent edge retention) and a lightweight aluminum handle that allows it to fit comfortably in your pocket.
Unique innovation: thanks to the Kinematic® system, the blade opens with thumb pressure.
Superior performance: D2 steel for excellent edge retention
Strong and lightweight: Aluminum handle combines strength and minimal weight
Unique function: Wire-mounted clip for safe carrying
Intended Use: EDC / Collection
Production type: Industrial
Country of manufacture: Taiwan
Blade: D2 steel
Blade treatment: Satin finish
Handle: Aluminum
Blade length: 65mm.
Blade thickness: 3.3mm.
Length closed: 107mm.
Total length: 182mm.
Weight: 98g.
Closure: Side Lever (modified back lock)
Clip: stainless steel, retractable
Packaging: cardboard box with CRKT logos
Notes: Design by Joe CaswellC4050 -
Citadel - Lancha Rayskin White knife - handmade knife
Intended use: sports / collection
Type of production: Artisan
Production Lama: Cambodia
Blade: in DNH7 carbon steel with 40 / 60HRC selective hardening
Blade treatment: -
Handle: stingray leather
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 25mm.
Balancing: -
Weight: 188g.
Closure: liner lock
Clip: -
Sheath: cordura bag
Packaging: -
Note: -AP-CIT-LRW -
Citadel - Rossignoli Folder Big - friction folding knife - craft knife
Intended use: sports / collection
Type of production: Artisan
Production Lama: Cambodia
Blade: in DNH7 carbon steel with 40 / 60HRC selective hardening
Blade treatment: -
Handle: Water Buffalo Horn
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 137mm.
Total length: 205mm.
Thick when closed: 23mm.
Balancing: -
Weight: 146 g.
Closure: folding with friction
Clip: -
Sheath: Cordura bag
Packaging: -
Note: -CD4211 -
CRKT - Provoke Compact - Kinematic Morphing Karambit - 4045 - knife
Intended Use: Tactical / Collection
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: Aluminum 6061-T6
Blade Length: 57mm.
Blade thickness: 3.7mm.
Length closed: 115mm.
Total length: 168mm.
Weight: 124g.
Closure: Side Lever (modified back lock)
Clip: Stainless steel, retractable
Package: Cardboard box with CRKT logos
Notes: Design by Joe CaswellC4045 -
CRKT - Woods Kangee T-Hawk by Ryan Johnson - 2735 - Tomahawk
Intended Use: Sporting / Hiking
Production Type: Industrial
Country of Production: Taiwan
Blade: Carbon steel 1055
Blade treatment: Manganese phosphate
Handle: Walnut wood
Blade length: 88mm.
Blade thickness: 17mm.
Total length: 480mm.
Weight: 958g.
Scabbard: -
Notes: Design by Ryan JohnsonCR2735 -
Sergio Consoli - Folder Damascus Spirograph - Timascus and bronze Handle - N ° 454 - handcrafted knives
Intended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018Acknowledgments
Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize for best folding
but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.
Presentation of the craftsman
Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.
With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.
I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".
Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...
SC-454€0.00Only -50 leftOut of stock -
CRKT - Provoke Blue - Kinematic Morphing Karambit - 4041B - Knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade treatment: Blackwashed
Handle: Grivory
Blade length: 63mm.
Blade thickness: 5.4mm.
Length closed: 126mm.
Total length: 182mm.
Weight: 133g.
Closure: Side Lever (modified back lock)
Clip: stainless steel, retractable
Packaging: cardboard box with CRKT logos
Notes: Design by Joe CaswellC4041B -
CRKT - Provoke Zap - Kinematic Morphing Karambit - 4041G - Knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade treatment: Blackwashed
Handle: Grivory
Blade length: 63mm.
Blade thickness: 5.4mm.
Length closed: 126mm.
Total length: 182mm.
Weight: 133g.
Closure: Side Lever (modified back lock)
Clip: Stainless steel, retractable
Package: Cardboard box with CRKT logos
Notes: Design by Joe CaswellCR4041G -
CRKT - Provoke Orange - Kinematic Morphing Karambit - 4041O - knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade treatment: Blackwashed
Handle: Grivory
Blade length: 63mm.
Blade thickness: 5.4mm.
Length closed: 126mm.
Total length: 182mm.
Weight: 133g.
Closure: Side Lever (modified back lock)
Clip: Stainless steel, retractable
Package: Cardboard box with CRKT logos
Notes: Design by Joe CaswellCR4041O -
CRKT - IBI Flipper Karambit Kubotan by Vox - 7097 - knife
Intended Use: Tactical / Self Defense Tool / Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade Finish: Blackwash
Handle: G-10 with stainless steel liners and copper spacer/karambit ring
Blade length: 68mm.
Blade thickness: 2.9mm.
Length closed: 122mm.
Total length: 190mm.
Weight: 79g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Package: Cardboard box with CRKT logos
Notes: Design by Jesper Voxnaes - Carson Flipper opening system on IKBS ball bearings - Designed for personal defense, when closed it can be used as a karambit and as a kubotan.C7150 -
CRKT - CEO Flipper by Rogers - 7097 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-8 58/60 HRC
Blade Finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon) with stainless steel liners
Blade length: 85mm.
Blade thickness: 2.3mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 54g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Package: Cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearings - New 2021 version of the CEO 7096 model, winner of the Blade Show 2019 as "Best Buy Of The Year".C7097 -
CRKT - Overland by T.J. Schwarz - 6280 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: G10 and Blackwashed stainless steel
Blade length: 76mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 187mm.
Weight: 102g.
Closure: FrameLock
Clip: in stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by T.J. SchwarzC6280 -
CRKT - Carson M16 Fixed Veff Serrations - M16-13FX - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: China
Blade: full tang in SK-5 carbon steel
Blade treatment: powder coated
Handle: G10
Blade length: 117mm.
Blade thickness: 4mm.
Total length: 238mm.
Weight: 130g.
Sheath: FRN with belt or neck loop
Packaging: cardboard box with CRKT logos
Notes: Design by Kit CarsonCM16-13FX -
CRKT - Carson M16 knife EDC Frame Lock - M16-10KSF - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Black Oxide
Handle: 2CR13 stainless steel
Blade length: 75mm.
Length closed: 102mm.
Total length: 180mm.
Weight: 82g.
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Kit CarsonCM16-10KSF -
CRKT - CEO by Rogers - 7096 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass
Blade length: 79mm.
Blade thickness: 2.2mm.
Length closed: 113mm.
Total length: 194mm.
Weight: 59g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - IKBS ball bearing opening system - Winner of the 2019 Blade Show as "Best Buy Of The Year"C7096 -
Citadel - Nordic hunter knife - 288 - craft knife
Citadel - Nordic
These handmade knives are distinguished by their original but functional line, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The knife is then polished and sharpened by hand on stone and finished in every single detail.Blade: DNH7 "Bruit de forge" selective hardening 40/60 HRC steel with file-worked spine
handle: In wood with brass guard
Blade length: 70 mm.
Handle length: 115 mm.
Blade thickness: 3.5 mm.
Total length: 195 mm.
Sheath: Handmade brown leather
Weight: 154 g.CI-NORDIC -
Citadel - Japanese Aikuchi - Special Salamander - craft knife
aikuchi
processing
The blades are carbon-hardened to a hardness of about 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (breed skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 170mm. (including habaki)
Total length: 275mm.
Weight: 210g. without sayaNote: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.
CI-AI-SAL -
CRKT - Provoke - Kinematic Morphing Karambit - 4040 - Knife
Intended use: Tactical / Collection
Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: Black Titanium Nitride
Handle: 6061-T6 Black Titanium Nitride Aluminum
Blade length: 61mm.
Blade thickness: 5.2mm.
Length closed: 125mm.
Total length: 180mm.
Weight: 173g.
Closing: Side Lever (modified back lock)
Clip: in stainless steel, retractable
Packaging: cardboard box with CRKT logos
Notes: Design by Joe CaswellC4040 -
CRKT - Journeyer Liner Lock by Liong Mah - 6530SWK - knife
Intended use: EDC
Type of production: Industrial
Country of production: China
Blade: 8Cr12MoV stainless steel
Blade treatment: Black Stone Washed
Handle: G10
Blade length: 70mm.
Blade thickness: 2.8mm.
Closed length: 98mm.
Total length: 165mm.
Weight: 82g.
Closure: Liner Lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Liong MahC6530SWK -
CRKT - 2773 Kasper Companion Plain Edge Knife - knife
Intended use: Sports / Tactical
Type of production: Industrial
Lama production: Taiwan
Blade: Stainless steel AUS-6 55-57 Rc
Blade treatment: sandblasted
Handle: Zytel
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed length: 135mm.
Total length: 215mm.
Thick when closed: 2.5 set back
Balancing: -
Weight: 178g.
Sheath: two nylon sheaths (for right and left) and multi fixing kit
Packaging: cardboard box with CRKT logosC2773 -
CRKT - Bear Claw Rescue Fixed Blade Knife 2510 - emergency knife
Intended use: tactical / emergency belt cutter
Type of production: Industrial
Country of production: Taiwan
Blade: in stainless steel AUS4
Blade treatment: -
Handle: Glass Reinforced Nylon
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: -
Total length: 146mm.
Weight: 96g.
Closing: -
Sheath: Glass-Reinforced Nylon
Packaging: Cardboard box with CRKT logos
Note: -C2510 -
CRKT - Carson F4 - Neck Knife - F4-02KN - knife
Intended use: neck / tactical / sports knife
Type of production: Industrial
Country of production: China
Blade: AUS-6 stainless steel
Blade treatment: Teflon coating
Handle: G10
Blade length: 73mm.
Blade thickness: 2.2mm.
Total length: 139mm.
Weight: 38g.
Sheath: ABS, with stainless steel clip for neck or belt
Packaging: cardboard box with CRKT logos
Notes: Design by Kit CarsonCF4-02KN -
CRKT - Fast Lane by Mattew Lerch - 7045 - knife
Intended use: Sports / Tactical
Type of production: Industrial
Lama production: China
Blade: 8Cr14MoV stainless steel
Blade Treatment: Black Stone Washed
Handle: G10
Blade length: 88mm.
Blade thickness: 3mm.
Length closed: 113mm.
Total length: 202mm.
Weight: 116g.
Closure: Liner Lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: "Outburtst" rapid opening systemC7045 -
CRKT - Snailor Compact by Vox - Pocket multitool - 9005 - Bottle Opener
With Snailor Compact on your key ring you will always have with you a fun and useful tool opener and a drinking buddy. This cute little snail has become so much popular and requested that Jesper Voxnaes no longer able to realize handcrafted in adequate quantities to meet customer needs!Functions:
* Bottle Opener
* Keychain Tool
* Pull ZipMaterial: 304 Stainless Steel with a satin finish
Overall Length: 43mm
Thickness: 3mm
Weight: 6gC9005 -
CRKT - Carson M21 EDC Frame Lock - M21-10KSF - knife
Use: Tactical / Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade Treatment: Black Oxide
Handle: Stainless steel 2CR13
Blade length: 79mm.
Blade thickness: 2.4mm.
Closed Length: 102mm.
Overall length: 182mm.
Weight: 79g.
Closure: Framelock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with logos CRKT
Notes: Design by Kit CarsonCM21-10KSF -
CRKT - Batum Compact by Vox - 5451 - Knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: Stainless Steel
Blade length: 62mm.
Blade thickness: 3.7mm.
Closed Length: 94mm.
Overall length: 157mm.
Weight: 102g.
Lock: Frame Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with logos CRKT
Notes: Design by VoxC5451 -
CRKT - Homefront EDC by Ken Onion - K250KXP - knife
Intended use: Sports
Type of production: Industrial
Production Country: Taiwan
Blade: stainless steel 1.1416 55/57 HRC
Blade treatment: Stonewashed
Handle: FRN
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed Length: 120mm.
Overall length: 210mm.
Weight: 122g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with CRKT logos
Notes: The knife can be easily disassembled and reassembled without the use of tools or screwdrivers - Design by Ken OnionCK250KXP -
CRKT - Batum by Vox - 5453 - Knife
Intended use: Sports
Type of production: Industrial
Production Country: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: Stainless Steel
Blade length: 80mm.
Blade thickness: 4.8mm.
Closed Length: 121mm.
Overall length: 150mm.
Weight: 196g.
Closing: Framelock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5453 -
Ahti Finland - Janka 75 - Finnish Puukko - Knife
Knives handicraft made by the craftsman Reino Kamppila in the Finnish city Kauhava. These knives are a perfect combination between tradition and quality construction.
Intended Use: Hunting / Sporting
Type of production: Hand
Blade: carbon steel 59HRC by Laurin Metals
Production Country: Finland
Handle: birch burl with brass bolsters
Blade length: 78mm.
Blade thickness: 3mm.
Overall length: 190mm.
Balancing: Defensive 2cm from the guard branch
Weight: 84g.
Sheath: leather with plastic insert
Notes: -14407 -
CRKT - Obake Skoshi by Burnley - Neck Knife - 2365 - Knife
Intended use: Sports
Type of production: Industrial
Production Country: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: nitriding titanium
Handle: rope and synthetic ray skin
Blade length: 61mm.
Blade thickness: 3mm.
Overall length: 136mm.
Weight: 43g.
Sheath: ABS, neck
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas BurnleyCR2365 -
CRKT - Amicus Compact Tanto by Vox - 5441 - Knife
Intended use: Sports
Type of production: Industrial
Production Country: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: Stainless Steel
Blade length: 76mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 186mm.
Weight: 107g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by VoxC5441 -
CRKT - Buku by Burnley - 2460 - Knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: Stainless Steel
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed Length: 123mm.
Overall length: 218mm.
Weight: 219g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas BurnleyC2460 -
CRKT - Ken Onion Wrinkle 2 - K200BXP - knife
Intended use: Sports / EDC
Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel AUS-8 to 57 / 59HRC
Blade treatment: Satin
Handle: Anodized aluminum with aged effect
Blade length: 65mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Overall length: 165mm.
Weight: 96g.
Lock: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with CRKT logos - Design by Ken Onion - opening system on IKBS type ball bearings with open type Carson FlipperCK200BXP -
CRKT - Get-A-Way Driver Torx - 9095 - Multipurpose Screwdriver
Also in the new version Torx, the Get-A-Way Driver proves an indispensable travel companion for those who want to always be ready for any eventuality.
In a body of 9.5 cm. and 50g. polymer with steel reinforcements are placed:
* Removable tool-holder
* Torx T5
* Torx T6
* Torx T8
* Torx T10
* bottle-opener
* Open oxygen cylinders
* LED light
* Aluminum carabinerC9095 -
Citadel - Phan Theit Water knife - Friction folder Bufalo - handmade knife
Intended use: collection / sports
Type of production: Artisan
Production Lama: Cambodia
Blade: DNH7 carbon steel
Blade treatment: -
Handle: Water Buffalo Horn
Blade length: about 76mm.
Blade thickness: about 3mm.
Closed length: about 103mm.
Total length: about 180mm.
Thick when closed: about 15mm.
Balancing: -
Weight: about 120g.
Closure: without blade lock
Clip: -
Sheath: cordura bag
Packaging: -
Note: -CIT-PTW -
CRKT - Pangolin by Ryan Johnson - 2790 - Knife
Intended use: Sports / Tactical
Type of production: Industrial
Production Country: China
Blade: full tang, stainless steel 8Cr13Mov 56/58 HRC
Blade treatment: Black Powder Coating
Handle: FRN
Blade length: 76mm.
Blade thickness: 3.2mm.
Overall length: 172mm.
Weight: 96g.
Sheath: ABS, with Tek-Lok attack
Packaging: cardboard box with CRKT logos
Notes: Design by Ryan JohnsonC2790