Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.

This knife is dedicated to Camembert and is sold in the round wooden box typical of this famous cheese known throughout the world.

Intended use: Regional/Collection

Type of production: artisanal
Blade: Stainless steel 12C27
Country of production: France
Handle: Pistachio wood
Blade length: 80mm.
Blade thickness: 2.6mm.
Length closed: 110mm.
Total length: 193mm.
Weight: 88g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: wooden box

The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.

This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.

The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration. 

The back spring (with the Maltese cross symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme. 

Intended use: Regional/Collection

Type of production: artisanal
Blade: Stainless steel 12C27
Blade production: France
Handle: Blond cow horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -

These high quality knives, are handcrafted in the tradition of French Thiers cutlery.

This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.

The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.

The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly. 

The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs. 

The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.

Intended Use: Regional/Collection/Outdoor/Hunting

Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -

A handmade Laguiole en Aubrac knife made by a master craftsman from the region of origin of Laguiole. Extremely precise in its manufacture, it is decorated with the shepherd's cross on the handle. This cross allowed those who left during the long months of the transhumance to say their prayers once the knife was stuck in the bread.

Destination: French regional collector's knife

Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 68 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: Absent

Laguiole En Aubrac - Oyster Opener Knife with oyster shell handle - Gift box

Ref.C2I99CQHI - Oyster knife with oyster shell handle

Presitigioso Open Oysters Laguiole En Aublrac.

Handcrafted realization

Blade: 12C27 Stainless Steel Handle: in oyster shell.

Blade length: 60 mm.

Blade thickness: 3 mm.

Total length: 180 mm.

Packaged in an elegant wooden box.

Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.

Blade: 12C27 Swedish steel with 54HRC satin finish.
Handle: in olive wood
Blade length: 105 mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 160 g.
Closure: spring
Sheath: -
Note:

Intended use: Collection / Sports

Type of production: artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Satin
Handle: Boxwood
Blade length: 82mm.
Blade thickness: 2.4mm.
Length closed: 111mm.
Total length: 193mm.
Weight: 53g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruining

Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.

The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".

The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.

The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.

Intended use: Collection / Sports

Type of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Mirror polished
Handle: Tip of bovine horn
Blade length: 112mm.
Blade thickness: 3mm.
Length closed: 143mm.
Total length: 255mm.
Weight: 80g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruining

The "Fidelis" was born from the desire to pay homage to the "medieval Larzac", with its old Templar villages and legends.
It is a knife that symbolizes the roughness of this land, the rusticity of its vegetation and its climate, but also the nobility of women and men who have worked, modeled, guarded and inserted into this object a soul.
Made in Millau, in the heart of Aveyron, in the cutlery workshops "L'ame du Causse", it is worked with noble materials, such as the precious wood of ebony that the Knights Templars have brought back to their return. Its "sage leaf" blade, made of 12C27 steel, renowned for its cutting quality and ease of maintenance, will be a guarantee of longevity. The "Fidelis" will be your ideal companion to share moments of everyday life full of history.

Intended use: Regional

Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade treatment: Satin
Handle: Ebony wood
Blade length: 85mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 54g.
Opening: manual, two-handed
Closure: upper safety ring
Packaging: cardboard case
Note: -

Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.

Blade: 12C27 Swedish steel with 54HRC satin finish.
Handle: in olive wood
Blade length: 105 mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 160 g.
Closure: spring
Sheath: -
Note:

Laguiole en Aubrac - Mistral horn - craft knife

Destination: Knife regional French handmade.

Blade: 12C27 stainless steel
Handle: horn
Blade length: 90 mm.
Blade thickness: 3 mm.
Overall length: 200 mm.
Weight: 96 g.
Folders: Stainless Steel
Head: Stainless Steel
Clasp: stainless steel retention spring
Clip: None
Sheath: None

Destination: Knife regional French handmade.

This model is considered the forerunner in the design of the famous classic Laguiole

Blade: Stainless swedish 12C27 to 54HRC polished.
Handle: boxwood
Blade length: 95 mm.
Blade thickness: 3 mm.
Overall length: 213 mm.
Weight: 76 g.
Folders: Stainless Steel
Head: Stainless Steel
Clasp: stainless steel retention spring
Clip: None
Sheath: None

Laguiole en Aubrac - Sauveterre horn - craft knife

Destination: Knife regional French handcrafted in the city of Sauveterre

Blade: Stainless swedish 12C27 to 54HRC polished.
Handle: stag
Blade length: 90 mm.
Blade thickness: 3 mm.
Overall length: 200 mm.
Weight: 90 g.
Folders: Stainless Steel
Head: Stainless Steel
Clasp: stainless steel retention spring
Clip: None
Sheath: None

Laguiole en Aubrac - Sauveterre deer - craft knife

Destination: Knife regional French handcrafted in the city of Sauveterre

Blade: Stainless swedish 12C27 to 54HRC polished.
Handle: stag
Blade length: 90 mm.
Blade thickness: 3 mm.
Overall length: 200 mm.
Weight: 90 g.
Folders: Stainless Steel
Head: Stainless Steel
Clasp: stainless steel retention spring
Clip: None
Sheath: None

Laguiole En Aubrac - Horn of Buffalo - knife collection

Destination : Knife regional French collector

Blade: 12C27 Swedish stainless steel in 54HRC brut de forge.
Handle: Buffalo
Blade length: 90 mm.
Blade Thickness: 2.5 mm .
Overall length : 220 mm .
Weight: 68 g .
Folders : Stainless steel brushed
Heads : Absent
Closure : Spring retention in satin stainless steel
Clip: None
Sheath: None

Laguiole en Aubrac - Bone with double blosters carbon - knife collection

Intended Use: Regional / Collection

Type of production: craft
Blade: Stainless steel 12C27
Production Blade: France
Handle: double blosters bone with carbon black and white
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 74g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -

Laguiole en Aubrac - Bone with double bolsters carbon - knife collection

Intended Use: Regional / Collection

Type of production: craft
Blade: Stainless steel 12C27
Production Blade: France
Handle: double blosters bone with carbon black and white
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 74g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -

En Aubrac Laguiole - Laguiole d'autrefois in horn tip - knife collection

Intended use: Collection / Sports

Type of production: craft
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle Blonde
Blade length: 112mm.
Blade Thickness: 3mm.
Closed Length: 143mm.
Overall length: 255mm.
Balancing: -
Weight: 80g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole en Aubrac

Laguiole en Aubrac - Double Head - Ebony Wood - knife collection

Intended Use: Regional / Collection

Type of production: craft
Blade: Stainless steel 12C27
Production Blade: France
Handle: ebony
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 110g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -

Prestigious Laguiole En Aublrac oyster opener with steel handle. Craftsmanship.

Blade: 12C27 Stainless Steel.

Handle: stainless steel.

Blade length: 60 mm.

Blade thickness: 3 mm.

Total length: 180 mm.

Packaged in elegant wooden box.

Laguiole En Aubrac - Horn Classic 11 cm - Knife

Intended use: Collection / Sports

Type of production: handmade
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle
Blade length: 105mm.
Blade Thickness: 3mm.
Closed Length: 130mm.
Total length: 240mm.
Balance: -
Weight: 106g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole En Aubrac

Laguiole En Aubrac - Horn Classic - knife

Intended use: Collection / Sports

Type of production: handmade
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle
Blade length: 90mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Total length: 200mm.
Balance: -
Weight: 72g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole En Aubrac

Laguiole En Aubrac - Lily inlaid - ebony - knife

Intended use: Collection / Sports

Type of production: handmade
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle Blonde
Blade length: 100mm.
Blade Thickness: 3mm.
Thickness of handle: 33mm.
Length closed: 118mm.
Total length: 217mm.
Balance: -
Weight: 98g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole En Aubrac

Laguiole En Aubrac - Myctic Horn Blonde - knife

Intended use: Collection / Sports

Type of production: handmade
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle Blonde
Blade length: 100mm.
Blade Thickness: 3mm.
Length closed: 118mm.
Total length: 217mm.
Balance: -
Weight: 64g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole En Aubrac

Laguiole En Aubrac - Buffalo Brut de forge and knife - knife

Destination: Knife regional French collector

Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: Buffalo
Blade length: 90 mm.
Blade Thickness: 2.5 mm.
Total length: 220 mm.
Weight: 68 g.
Folders: Stainless steel satin
Heads: Absent
Closure: Spring retention in satin stainless steel
Clip: None
Sheath: None

Laguiole En Aubrac - Double Spring - Juniper

Intended use: Sport

Type of production: Industrial
Production Blade: France
Blade: Stainless steel 12C27
Treatment Blade: satin
Handle: Wood Juniper
Blade length: 98mm.
Blade thickness: 2.5mm.
Length closed: 119mm.
Total length: 217mm.
Thick when closed: 20mm.
Balance: -
Weight: 102g.
Closure: A double spring
Clip: -
Sheath: -
package:
Notes:

Intended Use: Sport / Collection

Type of production: Semi Artisan
Production Blade: France
Blade: Stainless steel 12C27
Treatment Lama: -
Handle: Boxwood
Blade length: 95mm.
Blade thickness: 2mm.
Closed Length: 110mm.
Total length: 195mm.
Thick when closed: -
Balance: -
Weight: 44g.
Closure: Virobloc
Clip: -
Sheath: -
Packaging: Cardboard Box
Notes: -

Intended use: Regional / Collection

Type of production: artisan
Blade: 12C27 stainless steel
Lama production: France
Handle: horn
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 215mm.
Balancing: -
Weight: 66g.
Closure: back retention spring
Clip: -
Sheath: -
Note: -

AUR99GEI/NSB1

ATTENZIONE: trattandosi di prodotto artigianale, l'aspetto esteriore (colori, finiture, ecc.) varia rispetto al pezzo fotografato.

Destinazione: Coltello regionale francese da collezione

Lama: Acciaio Inox svedese 12C27 a 54HRC lucidato a specchio.
Manicatura: legno di ginepro
Lunghezza lama: 80 mm.
Spessore della lama: 2.5 mm.
Lunghezza totale: 195 mm.
Peso: 75 g.
Cartelle: Acciaio Inox satinato
Testine: Acciaio Inox satinato
Chiusura: Molla di ritenzione in acciaio Inox satinato
Clip: Assente
Fodero: Assente

Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.

The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".

The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.

The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.

Intended use: Collection / Sports

Type of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Polished
Handle: brown leather
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Weight: 68g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruining

L0312GEI/FSB1

ATTENZIONE: trattandosi di prodotto artigianale, l'aspetto esteriore (colori, finiture, ecc.) varia rispetto al pezzo fotografato.

Coltello chiudibile realizzato artigianalmente dalla Laguiole En Aubrac, una delle migliori e più antiche aziende francesi produttrici di coltelli “Laguiole”.

Lama: in acciaio 12C27 Stainless Steel
Manicatura: legno di ginepro
Lunghezza lama: 100 mm.
Spessore della lama: 2,5 mm.
Lunghezza totale: 220 mm.
Peso: 95g.
Chiusura: molla
Fodero: -
Note: cavaturaccioli

Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.

The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".

The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.

The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.

Intended use: Collection / Sports

Type of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Polished
Handle: fossil ivory and carbon fiber
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Weight: 68g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruining

Laguiole en Aubrac - Juniper - knife collection

Folding knife Laguiole En Aubrac crafted by one of the best and oldest French companies producing knives "Laguiole".

- 12C27 stainless steel blade with satin cm12
- Handle in juniper wood
- Total length 24 cm
- Spring and "fly" or "bee" (symbol that distinguishes a Laguiole visible on the back of the knife) forged quality with double layer (illustration)
- Weight 92 grams.

The pilgrims who went to Santiago de Compostela in Galicia used as a symbol a shell (Coquille St.Jaques for the French), which could be collected on the beach of the ocean not far away and served in a symbolic and practical way to collect the water from the streams or springs during the long and often tiring journey. Precisely the shell, over time, became the emblem in general of the pilgrim. the shell is a universal sacred symbol, both as a ritual tool and as an ornamental motif. The shell recalls the uterus and above all the universal uterus which is the container of the original Waters and the germs of beings. It evokes in a surprising way this dark abyss of creative energy. The shell has remained a living baptismal symbol to this day: the tool used to draw the Holy Water and pour it onto the forehead of the new one is often made of a metallic shell.

Intended use: Regional

Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade treatment: Satin
Handle: Walnut wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 54g.
Opening: manual, two-handed
Closure: without security systems
Packaging: cardboard case
Note: -

ATTENTION: as this is a handmade product, the external appearance (colors, finishes, etc.) differs from the photographed piece.

Intended use: Regional / Collection

Type of production: artisanal
Blade: 12C27 stainless steel
Lama production: France
Handle: Cattle Horn
Blade length: 100mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Total length: 220mm.
Balancing: -
Weight: 92g.
Closure: rear retention springk
Clip: -
Sheath: -
Notes: rear corkscrew

Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.

The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".

The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.

The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.

Intended use: Collection / Sports

Type of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Polished
Handle: maple briar
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Weight: 68g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruining

Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.

The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".

The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.

The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.

Intended use: Collection / Sports

Type of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Satin
Handle: Olive wood, with double stainless steel bolsters
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Weight: 68g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruining

Laguiole folding knife made by hand with the steel of the famous CONCORDE

Intended Use: Collection

Type of production: Industrial
Production Blade: France
Blade: Stainless steel 12C27
Treatment Lama: -
Handle material: aluminum and black corian
Blade length: 105mm.
Blade thickness: 2.5mm.
Length closed: 118mm.
Total length: 226mm.
Thick when closed: 16mm.
Balance: -
Weight: 90g.
Closure: A simple spring
Clip: -
Sheath: -
Packaging: cardboard tube with logos and certified Laguiole en Aubrac
Notes:

Coltello chiudibile Laguiole realizzato a mano con l'acciaio della famosa FRANCE BOAT

Destinazione d'uso: Collezione

Tipo di produzione: Industriale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: alluminio e corian blu
Lunghezza lama: 89mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 120mm.
Lunghezza totale: 210mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 90g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi e certificati Laguiole en Aubrac
Note:

Destination: Collection/Sporting

Type of production: custom
Blade: stainless steel 12C27
Made in: France
Handle: blonde cattle horn
Blade Length: 100mm.
Blade Thickness: 3mm.
Length Closed: 118mm.
Total Length: 217mm.
Weight: 116g.
Locking System: back spring
Note: comes with presentation box and cotton bag with Laguiole logo

Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.

The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".

The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.

The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.

Intended use: Collection / Sports

Type of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Satin
Handle: Pistachio wood
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Weight: 46g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruining

ATTENZIONE: trattandosi di prodotto artigianale, l'aspetto esteriore (colori, finiture, ecc.) varia rispetto al pezzo fotografato.

Destinazione: Coltello regionale francese da collezione

Lama: Acciaio Inox svedese 12C27 a 54HRC lucidato a specchio.
Manicatura: corno biondo
Lunghezza lama: 80 mm.
Spessore della lama: 2.5 mm.
Lunghezza totale: 200 mm.
Peso: 85 g.
Cartelle: Acciaio Inox
Testine: Acciaio Inox
Chiusura: Molla di ritenzione in acciaio Inox
Clip: Assente
Fodero: Assente