Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Down Under Knives - The Outback Bowie Eclipse Version - DUK-EC - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition, aesthetically marked by some oxidation marks on the blade, guard and pommel; the scabbard leather is also somewhat marked
* Commercially available: Currently in production
* Sharpening: Factory.
* Marks on blade: various oxidation marks.
* Marks on handle: None
* Box: Present and complete with accessories.
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory
Intended Use: Hunting / OutdoorProduction Type: Industrial
Country of Production: Taiwan
Blade: Made of 1095 carbon steel at 58/59HRC
Blade Treatment: mirror polish
Handle: brass and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Scabbard: Black leather
Packaging: cardboard box with Down Under logos, sharpening steel
Notes: the Outback is a clear homage to the knife used by Paul Hogan in the Mr. Crocodile Dundee movies, in fact it faithfully traces its shape and dimensions. - Eclipse version in carbon steel (it is recommended to keep it oiled and stored outside the leather sheath) - Previously purchased knife, from a private collectionL446228-CP -
Work Sharp - WSBCHPAJ-ELT - 15°/ 30° Precision Adjust Knife Sharpener Elite with Diamond and Ceramic - Manual Sharpener
Based on the best-selling Precision Adjust knife sharpener, the Precision Adjust ELITE is an angle-adjustable knife sharpening system with seven abrasive grits that offers precision and repeatability for sharpening enthusiasts who want the best in hand sharpening.
Sharpening angles can be adjusted from 15° to 30° in 1° increments to suit a wide range of kitchen, outdoor and EDC knives. Supplied with diamond grit plates and a fine ceramic for repairing, sharpening and polishing to an incredibly sharp edge. Then the leather quill refines and polishes the edge for even more extraordinary results. The included ceramic rod sharpens serrations.
Innovative V-Block clamp design locks the knife quickly and securely during sharpening. Tri-Brasive® case and holder keep abrasives and sharpener neat and ready to use wherever your adventure takes you.
From repair work to reprofiling your favorite EDC to mirror polishing any blade, this sharpener offers the ultimate in performance.
- It includes the Precision Adjust sharpener and upgrade kit in one package.
- Sharpener with rod and clamp designed for ease and safety.
- 15° to 30° angle guides
- Includes 220, 320, 400, 600, and 800 grit diamond plates, ceramic plates, leather clamp, and ceramic rod for sawing.WS-WSBCHPAJ-ELT -
Work Sharp - WSGSS-G - 17°/ 20° Diamond and Ceramic Guided Sharpener System - Manual Sharpener
The Guided Sharpening System is our complete bench sharpening and honing system. It was created with both beginners and master sharpeners in mind and can be used to sharpen all knives in your possession.
The innovative Pivot-Response system follows the curvature of the blade during sharpening to give you an accurate edge along the entire length of the blade. You don't need to acquire skill with this tool because the skill is already built into the tool, making sharpening fun and easy to learn thanks to the 17° and 20° angle guides. The Guided Sharpening System with Angle Guides can be used separately and carried with you in the field, so you can keep sharpening away from the workbench.
Use the Guided Sharpening System to perfectly sharpen your pocket, hunting and kitchen knives as well as serrated blades, fish hooks and a variety of tools quickly and easily.
- Sturdy plastic and stainless steel construction
- Coarse diamond stone with grit #320 and guided angle of 17° or 20°
- Fine diamond stone with grit #600 and guided angle of 17° or 20°
- 3-position ceramic sharpener (roughing, polishing and fish hooks) with 20° guided angle
- Small ceramic sharpener for serrated bladesWS-WSGSS-G -
Down Under Knives - The Outback Bowie Eclipse Version - DUK-EC - Knife
ECLIPSE version, in 1095 carbon steel and sheath and handle in black leather
Intended Use: Hunting / Outdoor
Type of production: Industrial
Production Country: Taiwan
Blade: carbon steel in 1095 to 58 / 59HRC
Blade treatment: mirror polishing
Handle: brass and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Overall length: 405mm.
Weight: 800g.
Sheath: Black Leather
Packaging: cardboard box with Down Under logos, sharpening steel for sharpening
Notes: The Outback is a clear homage to the knife used by Paul Hogan in the movie Crocodile Dundee, it indeed follows closely the shape and size.L446228 -
Brusletto - Vassfaret F/150 - Signature Edition - 19932 - knife
Intended use: Hunting / sports / collection
Type of production: semi-industrial
Production Blade: Norway
Blade: 440C stainless steel
Treatment Blade: mirror polishing
Handle: Micarta
Blade length: 90mm.
Blade Thickness: 3.5mm.
Length closed: -
Overall length: 210mm.
Balancing: back
Weight: 238g.
Sheath: Black leather
Note: version with blade autographed by Ken Where Nyhus, CEO of Brusletto & Co. AS10970€143.44Only 2 left -
Down Under Knives - The Arkansas Toothpick Bowie - DUK-TP - knife
Intended use: Sport / Collection
Type of production: Industrial
Blade production: Taiwan
Blade: 440C stainless steel with selective tempering
Blade treatment: -
Handle: Leather rings
Blade length: 285mm.
Blade thickness: 5.5mm.
Closed length: -
Total length: 415mm.
Thickness when closed: -
Balance: -
Weight: 630g.
Lock: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with Down Under Knives logos
Notes: -L446029 -
Down Under Knives - Kookaburra Throwing Knives DUK-KB - Throwing Knives
Set of two throwing knives with sheath
Intended use: Throwing / Outdoor
Type of production: Industrial
Blade production: Taiwan
Blade: 440C stainless steel - 52HRC
Handle: Leather
Blade length: 170mm.
Blade thickness: 6mm.
Total length: 305mm.
Weight: 358g.
Sheath: Leather, crocodile-like
Packaging: Cardboard box with Down Under logosL446017 -
Down Under Knives - Red Rock Raptor Kukri Machete - L446026 - knife
Intended use: Kukri/Heavy Utility
Type of production: Industrial
Blade production: Taiwan
Blade: 440C stainless steel with differential tempering 59/46HRC
Blade Treatment: Mirror polishing
Handle: Brass and leather rings
Blade length: 260mm.
Blade thickness: 5.5mm.
Total length: 395mm.
Weight: 690g.
Sheath: Leather, reptile-likePackaging: Cardboard box with Down Under logos and warranty certificates
L446026 -
Down Under Knives - The Outback Bowie - knife - L446028
Intended use: Hunting / Outdoor
Type of production: Industrial
Production Blade: Taiwan
Blade: 440C stainless steel hardened differentiated 58/45HRC
Treatment Blade: Mirror polishing
Handle: Brass, ebony wood and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Sheath: In leather, crocodile-like
Packaging: cardboard box with logos Down Under, sharpener for sharpening
Notes: The outback is a clear homage to the knife used by Paul Hogan in Crocodile Dundee movie, in fact faithfully reproduces the shape, size and material as the one used for filming.L446128 -
Work Sharp - WSGFS - 20° Guided Field Diamond and Ceramic Sharpener - Manual Sharpener
Guided field sharpener is a complete solution for sharpening in the field or at home
Designed exclusively for sportsmen and knife users who need a complete, robust and compact manual sharpening solution.
Incorporates 5 sharpening and honing stages, each with built-in angle guides to achieve uniform sharpening across the blade. The 20° guides, 320 and 600 grit diamond, fine ceramic rods, and 25° leather stropping combine to provide a one-stop solution from repair to creating a well-sharpened and polished knife.
The Guided Field Sharpener also sharpens serrations and fish hooks, and the removable, magnetically attached diamond plates reveal a cavity for storing additional tools useful to you.
- Sturdy plastic construction with non-slip rubber inserts
- Coarse diamond stone with #320 grit and 20° guided angle
- Fine diamond stone with #600 grit and 20° guided angle
- Ceramic sharpener with 3 positions (roughing, polishing and fish hooks) with 20° guided angle
- Leather part for stropping and polishing to blades, with 25° guided angle
- Small ceramic sharpener for serrated blades
- Hole for lanyard or stringWS-WSGFS -
Sergio Consoli - Folder Damascus Spirograph - Timascus and bronze Handle - N ° 454 - handcrafted knives
Intended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018Acknowledgments
Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize for best folding
but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.
Presentation of the craftsman
Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.
With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.
I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".
Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...
SC-454€0.00Only -50 leftOut of stock -
Down Under Knives - Walkabout Bowie - knife - L446021
Down Under Knives - Walkabout Bowie - knife - L446021
Intended Use: Hunting / Outdoor
Type of production: Industrial
Production Lama: Taiwan
Blade: Stainless steel 440C Differentiated hardening 58 / 45HRC
Lama treatment: Mirror polishing
Handle: brass, ebony wood and leather rings
Blade length: 195mm.
Blade thickness: 6mm.
Overall length: 325mm.
Weight: 566g.
Sheath: Leather
Packaging: cardboard box with logos Down Under, sharpening steel for sharpening
Notes:L446021 -
Down Under Knives - The Mistress Bowie - knife
Intended Use: Sport / Collection
Type of production: Industrial
Production Blade: Taiwan
Blade: 440C stainless steel hardened selective
Treatment Blade: -
Handle material: Leather Rings
Blade length: 329mm.
Blade thickness: 5.5mm.
Length closed: -
Overall length: 450mm.
Thick when closed: -
Balancing: -
Weight: 832g.
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos Down Under Knives
Notes: -L446033 -
Down Under Knives - The Bushmate - knife
Intended Use: Light Utility
Type of production: Industrial
Blade: 440C stainless steel hardened differentiated 59/46HRC
Treatment Blade: Mirror polishing
Handle: Brass rings and leather
Blade length: 100mm.
Blade thickness: 5.5mm.
Total length: 270mm.
Weight: 360g.
Sheath: In leather, with bone inserts
Packaging: cardboard box with logos Down Under and warranty certificatesL446010 -
Sergio Consoli - N°098 Folding Walnut - Custom Knife
Blade: 61HRC RWL34 Stainless Steel
Handle: Walnut, Damascus and Titanium
Blade Lenght: 75mm.
Blade Thickness: 4mm.
Overall Lenght: 180mm.
Weight: 110g.
Lock: Liner lock
Clip: -
Sheath: -
Notes: Handmade in Italy by CIC Master Sergio Consoli9015€729.51Out of stock -
Down Under Knives - The Razorback knife - L446018 - DUK-RB - knife
Intended use: Heavy Utility
Type of production: Industrial
Blade: 440C stainless steel with differential hardening 59/46HRC
Blade Treatment: Mirror polish
Handle: Brass and leather rings
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 307mm.
Weight: 465g.
Sheath: Leather, with bone inserts
Packaging: Cardboard box with Down Under logos and warranty certificatesL446018