Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 10 left -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Sergio Consoli - Folder Damascus Spirograph - Timascus and bronze Handle - N ° 454 - handcrafted knives
Intended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018Acknowledgments
Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize for best folding
but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.
Presentation of the craftsman
Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.
With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.
I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".
Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...
SC-454€0.00Only -50 leftOut of stock -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
Hardcore Hardware Australia - MFK-04 GEN II - Desert - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Australia
Blade: full tang in steel D2 at 58 / 60HRC
Blade treatment: Teflon coating
Handle: G10
Blade length: 130mm.
Blade thickness: 6mm.
Total length: 267mm.
Balancing: Advanced
Weight: 319g.
Sheath: in Kydex, with Tek-Lok attacks
Packaging: cardboard box
Note: -HH-MFK04D€220.49Out of stock -
Hardcore Hardware Australia - MFK-02 GEN II - Desert - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Australia
Blade: full tang in steel D2 at 58 / 60HRC
Blade treatment: Teflon coating
Handle: G10
Blade length: 128mm.
Blade thickness: 6mm.
Total length: 265mm.
Balancing: Advanced
Weight: 347g.
Sheath: in Kydex, with Tek-Lok attacks
Packaging: cardboard box
Note: -HH-MFK02D€220.49Out of stock -
Kiku Matsuda Knives - Kawa Kaze KK01 en acero SanMai Cuchillo fijo - cuchillo artesanal
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.
Uso previsto: Colección / Deportes
Tipo de producción: Artesano
Producción de Lama: Japón
Hoja: acero inoxidable SanMai SPG2 con 67 capas - 63/64 HRC
Tratamiento con cuchilla: -
Manija: Lona negra Micarta
Longitud de la hoja: 95 mm.
Espesor de la hoja: 3.9mm.
Longitud cerrada: -
Longitud total: 200 mm.
Espesor cuando está cerrado: -
Equilibrio: -
Peso: 132 g.
Cierre: -
Clip: -
Funda: en Kydex con ataque Tek-Lok
Paquete: -
Notas: En 2007, Kiku Matsuda ganó el prestigioso Blade Show "Cuchillo del año" con un proyecto creado en colaboración con SOG.KK01 -
Kiku Matsuda Knives - Southern Cross KM-760 Fixed Knife - craft knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.
Intended use: Collection / Sports
Type of production: Artisan
Lama production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade treatment: -
Handle: Black Canvas Micarta
Blade length: 80mm.
Blade thickness: 5.3mm.
Length closed: -
Total length: 195mm.
Thickness when closed: -
Balancing: -
Weight: 186g.
Closure: -
Clip: -
Sheath: in Kydex with Tek-Lok attack
Package: -
Notes: Kiku Matsuda won in 2007 the prestigious "Knife Of The Year Awards" Blade Show with a project realized in collaboration with SOGKM-760 -
Kiku Matsuda Knives - Back Up Neo 300 Fixed Blade Knife - craft knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.
Purpose of use: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade Treatment: -
Manicure: Black Canvas Micarta
Blade Length: 140mm.
Blade thickness: 6.5mm.
Closed length: -
Total Length: 270mm.
Closure thickness: -
Balance: -
Weight: 384g.
Closure: -
Clip: -
Sheath: in Kydex with Tek-Lok attachment
Packing: -
Notes: Kiku Matsuda won the prestigious prize at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOGKM-300 -
Kiku Matsuda Knives - Back Up Zero 490 Fixed Blade Knife - artisan knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.
Purpose of use: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade Treatment: -
Manicure: Green Canvas Micarta
Blade Length: 98mm.
Blade thickness: 5.5mm.
Closed length: -
Total length: 200mm.
Closure thickness: -
Balance: -
Weight: 250g.
Closure: -
Clip: -
Sheath: in Kydex with Tek-Lok attachment
Packing: -
Notes: Kiku Matsuda won the prestigious award at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOG KnivesKM-490 -
Kiku Matsuda Knives - J Defender Fixed Blade - custom knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years, he has worked with SOG, William Henry, Pro-Tech and Randall Kings for blades, sharpening and burring.
Purpose: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade treatment: acidification with subsequent polishing and polishing of the wire
Handle: G10
Blade Length: 135mm.
Blade thickness: 4.5mm.
Total length: 250mm.
Weight: 186g.
Sheath: in thermoformed Kydex, with Tek-Lok attachment
Packing: cardboard box with Kiku Knives logos
Notes: Kiku Matsuda won the prestigious award at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOG KnivesKM-730 -
Kiku Matsuda Knives - Karambit Desperade - handmade knife
Kiku Matsuda is one of the most famous artists and scholars sharpening throughout Japan; probably in your collection is already a fruit knife of his passion: collaborates for several years with SOG, William Henry, Pro-Tech and Randall Kings developing to their bevels, and politure sharpening the blades.
Intended Use: Collection / TacticalType of production: Handmade
Production Country: Japan
Blade: D2 hardened carbon steel to 61 HRC
Handle: Green Canvas Micarta
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 232mm.
Balancing: Set back
Weight: 210g.
Sheath: Kydex with Tek-Lok attack
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project carried out in collaboration with SOG Knives12508 -
Kiku Matsuda Knives - Momose Gawa Fishing Knife KM-390 - Knife
Kiku Matsuda Knives - Momose Gawa Fishing Knife KM-390 - Knife
Kiku Matsuda is a great fisherman and model Momose Gawa is his favorite for fishing in the river.
Intended use: Sport / Fishing
Type of production: Artisan
Production Lama: Japan
Blade: stainless steel 14C28N
Treatment Lama: acid
Handle: Black Canvas Micarta
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 170mm.
Thick when closed: -
Balancing: -
Weight: 74g.
Closing: -
Clip: -
Sheath: Kydex attack with Tek-Lok
Packaging: -
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project in collaboration with SOG KnivesKM-390 -
Kiku Matsuda Knives - Knife KM-340 - craft knife
Kiku Matsuda Knives - Knife KM-340 - craft knife
Intended Use: Collection / Sports / Tactical
Unique and no longer produced by Kiku
Type of production: Artisan
Production Lama: Japan
Blade: carbon steel 61HRC D2
Treatment Lama: acid
Handle: Black G10
Blade length: 195mm.
Blade thickness: 5mm.
Length closed: -
Overall length: 340mm.
Thick when closed: -
Balancing: -
Weight: 440g.
Closing: -
Clip: -
Sheath: Kydex attack with Tek-Lok
Packaging: -
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project in collaboration with SOG KnivesHK-340 -
Kiku Matsuda Knives - Yuki Kaze Knife KM-460 - craft knife
Kiku Matsuda Knives - Yuki Kaze Knife KM-460 - craft knife
Intended Use: Collection / Sports / Tactical
Type of production: Artisan
Production Lama: Japan
Blade: carbon steel OU-31 hardened to 63/64 HRC
Treatment Lama: -
Handle: Black Canvas Micarta
Blade length: 176mm.
Blade thickness: 6,8mm.
Length closed: -
Overall length: 314mm.
Thick when closed: -
Balancing: -
Weight: 486g.
Closing: -
Clip: -
Sheath: Kydex attack with Tek-Lok
Packaging: -
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project in collaboration with SOG KnivesKM-460 -
Kiku Matsuda Knives - Hasinau Kamui Master Hunters - craft knife
Kiku Matsuda è uno dei più famosi artisti e studiosi dell'affilatura di tutto il Giappone; probabilmente nella vostra collezione sarà già presente un coltello frutto della sua passione: collabora infatti da diversi anni con SOG, William Henry, Pro-Tech e Randall Kings sviluppando per loro bisellature, affilature e politure delle lame.
Destinazione d'uso: Collezione/Caccia
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: in acciaio al carbonio OU-31 temprato a 63/64 HRC
Trattamento Lama: -
Manicatura: G10 Black
Lunghezza lama: 130mm.
Spessore lama: 5,0mm.
Lunghezza chiuso: -
Lunghezza totale: 260mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 360g.
Chiusura: -
Clip: -
Fodero: in Kydex con attacco Tek-Lok
Confezione: -
Note: Questo coltello è stato disegnato dal giapponese Mr. Chujyo di Hokkaido - Kiku Matsuda ha vinto nel 2007 il prestigioso premio al Blade Show "Knife Of The Year Awards" con un progetto realizzato in collaborazione con SOG KnivesKnife Of The Year Awards Knife Of The Year AwardsKM-500A -
Kiku Matsuda Knives - Blast Fixed Blade - custom knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years, he has worked with SOG, William Henry, Pro-Tech and Randall Kings for blades, sharpening and burring.
Purpose: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade treatment: acidification with subsequent polishing and polishing of the wire
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.8mm.
Total Length: 275mm.
Weight: 390g.
Sheath: in thermoformed Kydex, with Tek-Lok attachment
Packing: cardboard box with Kiku Knives logos
Notes: Kiku Matsuda won the prestigious award at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOG KnivesKM-215 -
Kiku Matsuda Knives - Aoba Fixed Blade Knife - craft knife
Kiku Matsuda è uno dei più famosi artisti e studiosi dell'affilatura di tutto il Giappone; probabilmente nella vostra collezione sarà già presente un coltello frutto della sua passione: collabora infatti da diversi anni con SOG, William Henry, Pro-Tech e Randall Kings sviluppando per loro bisellature, affilature e politure delle lame.
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: in acciaio al carbonio OU-31 temprato a 63/64 HRC
Trattamento Lama: -
Manicatura: Black Canvas Micarta
Lunghezza lama: 105mm.
Spessore lama: 5,5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 260g.
Chiusura: -
Clip: -
Fodero: in Kydex con attacco Tek-Lok
Confezione: -
Note: Kiku Matsuda ha vinto nel 2007 il prestigioso premio al Blade Show "Knife Of The Year Awards" con un progetto realizzato in collaborazione con SOG KnivesKnife Of The Year Awards Knife Of The Year AwardsAB31 -
Kiku Matsuda Knives - Back Up Small Fixed Blade Knife - craft knife
Kiku Matsuda è uno dei più famosi artisti e studiosi dell'affilatura di tutto il Giappone; probabilmente nella vostra collezione sarà già presente un coltello frutto della sua passione: collabora infatti da diversi anni con SOG, William Henry, Pro-Tech e Randall Kings sviluppando per loro bisellature, affilature e politure delle lame.
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: in acciaio al carbonio OU-31 temprato a 63/64 HRC
Trattamento Lama: -
Manicatura: Green Canvas Micarta
Lunghezza lama: 98mm.
Spessore lama: 5,5mm.
Lunghezza chiuso: -
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 250g.
Chiusura: -
Clip: -
Fodero: in Kydex con attacco Tek-Lok
Confezione: -
Note: Kiku Matsuda ha vinto nel 2007 il prestigioso premio al Blade Show "Knife Of The Year Awards" con un progetto realizzato in collaborazione con SOG KnivesKnife Of The Year Awards Knife Of The Year AwardsBUP-MN -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock -
Sergio Consoli - N°098 Folding Walnut - Custom Knife
Blade: 61HRC RWL34 Stainless Steel
Handle: Walnut, Damascus and Titanium
Blade Lenght: 75mm.
Blade Thickness: 4mm.
Overall Lenght: 180mm.
Weight: 110g.
Lock: Liner lock
Clip: -
Sheath: -
Notes: Handmade in Italy by CIC Master Sergio Consoli9015€729.51Out of stock