Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Work Sharp - WSBCHPAJ-ELT - 15°/ 30° Precision Adjust Knife Sharpener Elite with Diamond and Ceramic - Manual Sharpener
Based on the best-selling Precision Adjust knife sharpener, the Precision Adjust ELITE is an angle-adjustable knife sharpening system with seven abrasive grits that offers precision and repeatability for sharpening enthusiasts who want the best in hand sharpening.
Sharpening angles can be adjusted from 15° to 30° in 1° increments to suit a wide range of kitchen, outdoor and EDC knives. Supplied with diamond grit plates and a fine ceramic for repairing, sharpening and polishing to an incredibly sharp edge. Then the leather quill refines and polishes the edge for even more extraordinary results. The included ceramic rod sharpens serrations.
Innovative V-Block clamp design locks the knife quickly and securely during sharpening. Tri-Brasive® case and holder keep abrasives and sharpener neat and ready to use wherever your adventure takes you.
From repair work to reprofiling your favorite EDC to mirror polishing any blade, this sharpener offers the ultimate in performance.
- It includes the Precision Adjust sharpener and upgrade kit in one package.
- Sharpener with rod and clamp designed for ease and safety.
- 15° to 30° angle guides
- Includes 220, 320, 400, 600, and 800 grit diamond plates, ceramic plates, leather clamp, and ceramic rod for sawing.WS-WSBCHPAJ-ELT -
Work Sharp - WSGSS-G - 17°/ 20° Diamond and Ceramic Guided Sharpener System - Manual Sharpener
The Guided Sharpening System is our complete bench sharpening and honing system. It was created with both beginners and master sharpeners in mind and can be used to sharpen all knives in your possession.
The innovative Pivot-Response system follows the curvature of the blade during sharpening to give you an accurate edge along the entire length of the blade. You don't need to acquire skill with this tool because the skill is already built into the tool, making sharpening fun and easy to learn thanks to the 17° and 20° angle guides. The Guided Sharpening System with Angle Guides can be used separately and carried with you in the field, so you can keep sharpening away from the workbench.
Use the Guided Sharpening System to perfectly sharpen your pocket, hunting and kitchen knives as well as serrated blades, fish hooks and a variety of tools quickly and easily.
- Sturdy plastic and stainless steel construction
- Coarse diamond stone with grit #320 and guided angle of 17° or 20°
- Fine diamond stone with grit #600 and guided angle of 17° or 20°
- 3-position ceramic sharpener (roughing, polishing and fish hooks) with 20° guided angle
- Small ceramic sharpener for serrated bladesWS-WSGSS-G -
Coltelleria Collini - Animals Scissors straight blade - 8 ''
Scissors straight blade animals - 8 '' Scissors specifically designed for thinning and shearing of animals The scissors of the Style series are produced in high carbon content stainless steel, characterized by semi-convex blades and concave inner surface to significantly reduce the effort of the hand during cutting, thus guaranteeing a cutting performance easier, precise and lasting. Material: 420 Stainless steel brushed straight blade: Blade length: 9 cm Total length: 8 inch - 19 cm Sharpening: Plain / smooth Finger rest: Fixedcollini8,5 -
Collini Cutlery - Scissors Thinning mod. Style by Salon Professional 6"
Scissors Thinning mod. Style by Salon Professional 5.5 "
Material: Stainless steel 420 satined
Blade: a smooth and notched
Blade Length: 5.5 cm
Overall Length: 5.5 Inches - 14,5 cm
Sharpening: Plain
Finger rest: Removable
Weight: 46 gr.Each scissor is controlled by our laboratory in order to ensure a perfect cut
collini29 -
Collini Cutlery - Scissors Thinning Style by Salon Professional 5.5"
Scissors Thinning mod. Style by Salon Professional 5.5 "
Material: Stainless steel 420 satined
Blade: a smooth and notched
Blade Length: 5.5 cm
Overall Length: 5.5 Inches - 14,5 cm
Sharpening: Plain
Finger rest: Removable
Weight: 46 gr.Each scissor is controlled by our laboratory in order to ensure a perfect cut
collini026B -
Coltelleria Collini - Chef's food tongs - Beak - 15 cm
Coltelleria Collini - Chef's food tongs - Beak - 15 cm
Chef's food tongs with beak - 15 cm.
Stainless steel chef's tongs, useful for checking the cooking of food and making it easier to grip. Its curved shape makes it possible to move and check the food more precisely, especially for the plating and decorating of sweet or savoury dishes.
Ideal especially for preparing sushi dishes.
Specifications:
Dishwasher safe
Length: 15cm.
collini0013 -
Coltelleria Collini - Scissors for animals mod. straight blade - 9 ''
Scissors for animals mod. straight blade - 9 '' Scissors specifically designed for thinning and shearing of animals The scissors of the Style series are produced in high carbon content stainless steel, characterized by semi-convex blades and concave inner surface to significantly reduce the effort of the hand during cutting, thus guaranteeing a cutting performance easier, precise and lasting. Material: 420 Stainless steel brushed straight blade: Blade length: 12 cm Total length: 9 inch - 23 cm Sharpening: Plain / smooth Finger rest: Fixed Each scissor is controlled by our laboratory in order to ensure a perfect cutcollini34 -
Coltelleria Collini - Animals Scissors straight blade - 8 ''
Scissors straight blade animals - 8 '' Scissors specifically designed for thinning and shearing of animals The scissors of the Style series are produced in high carbon content stainless steel, characterized by semi-convex blades and concave inner surface to significantly reduce the effort of the hand during cutting, thus guaranteeing a cutting performance easier, precise and lasting. Material: 420 Stainless steel brushed straight blade: Blade length: 9 cm Total length: 8 inch - 19 cm Sharpening: Plain / smooth Finger rest: Fixedcollini33 -
Coltelleria Collini - Stainless steel cutter for ingrown toenails 10 cm
Classic series nail clippers are manufactured from high cobalt stainless steel.
Professional, stylish, sturdy, practical nail clippers suitable for ingrown nails
- Stainless steel
- Excellent quality
- Single spring
- Total size: 10 cm.To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening laboratory, checks and overhauls every tool sold.
collini23 -
Coltelleria Collini - Stainless steel cutter for ingrown toenails 12 cm
Classic series nail clippers are manufactured from high cobalt stainless steel.
Professional, stylish, sturdy, practical nail clippers suitable for ingrown nails
- Stainless steel
- Excellent quality
- Single spring
- Total size: 12 cm.To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening laboratory, checks and overhauls every tool sold.
collini025 -
Coltelleria Collini - Stainless steel cutter for ingrown toenails 13 cm
Classic series nail clippers are made of high cobalt stainless steel.
Professional, stylish, sturdy, practical nail clippers suitable for ingrown nails
- Stainless steel
- Excellent quality
- Single spring
- Total size: 13 cm.To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening workshop, checks and overhauls every tool sold.
collini027 -
Coltelleria Collini - Chef's tongs for food - Sushi - 21cm
Coltelleria Collini - Chef's tongs for food - Sushi - 21cm
CHEF'S TONGS
Stainless steel chef's tongs, useful for checking the cooking of food and making it easier to grip. Its curved shape makes it possible to move and check the food more precisely, especially for the plating and decoration of sweet or savoury dishes.
Ideal especially for preparing sushi dishes.
Technical features:
Dishwasher safe
Length: 21cm.
collini0012 -
Coltelleria Collini - microfibre cloth for cleaning blades - accessory
The microfibre cloth for cleaning blades, offered by Coltelleria Collini, represents an essential accessory for cutlery enthusiasts and for those who want to keep their blades always in perfect condition. This cloth, measuring 15x15 cm, has been designed to offer effective cleaning of the blades, easily removing fingerprints, grease and dirt without leaving streaks or scratches.
Personalized with the Coltelleria Collini logo, this cloth is not only a practical maintenance tool, but also becomes a symbol of belonging to our community of enthusiasts and customers.
Suitable for both daily and professional use, the microfibre cloth for cleaning blades is the accessory that cannot be missing from every knife lover's collection.
CC-PANNOMF -
Coltelleria Collini - Stainless steel cutter for ingrown toenails 14 cm
Classic series nail clippers are made of high cobalt stainless steel.
Professional, stylish, sturdy, practical nail clippers suitable for ingrown nails
- Stainless steel
- Excellent quality
- Double spring
- Total size: 14 cm.To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening laboratory, checks and overhauls every tool sold.
collini037 -
Coltelleria Collini - Black Hat - Gadgets
Black Hat - Gadgets
Comfortable 100% cotton baseball cap with embroidery Collini Cutlery.
The baseball cap is useful in all situations, with a modern pre-curved visor, a comfortable shelter from the sun, and the light summer rain, very breathable and durable cotton.
One size fits all adjustable through system closing on the back.
collini-hat -
Coltelleria Collini - Stainless nail clippers 12 cm
Style series nail clippers are manufactured from high-carbon stainless steel.
Professional, stylish, sturdy, practical nail clippers suitable for hand manicures
- Stainless steel
- Excellent quality
- Single spring
- Total size: 12 cm.To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening workshop, checks and overhauls every tool sold.
collini034 -
Coltelleria Collini - Stainless Steel Cutter for Skins
Style series cutters are manufactured from high-carbon stainless steel.
Professional, stylish and practical cutters suitable for hand manicures
- Stainless steel at
- Excellent quality
- Single spring
- Cutting size: 5 mm or 7 mmTo ensure a perfect cut, Coltelleria Collini with its in-house sharpening workshop checks and overhauls every tool sold.
collini036 -
Coltelleria Collini - Professional Hairdressing Scissors 5.5"
Classic series hairdressing scissors
Material: satin-finish 420 stainless steel
Blade: smooth
Blade Length: 5 cm
Total Length: 5.5 Inches - 14 cm
Sharpening: Flat
Finger Rest: Removable
Weight: 44 gr.Each scissor is checked by our in-house laboratory in order to ensure a perfect cut
collini012 -
Coltelleria Collini - microfibre bag for folding knives - 180 X 80 mm - accessory
Microfibre bag for folding knives, offered by Coltelleria Collini, confirms itself as an essential accessory for knife enthusiasts and for those who aspire to preserve their blades in impeccable condition. Characterized by generous dimensions of 180x80 mm, this bag has been meticulously designed to house and protect folding knives, using a quality microfibre material that guarantees effective defense against dust, abrasion and impacts.
Equipped with a practical drawstring closure system, enriched by a plastic thread holder, the bag ensures additional protection for the knives, preventing them from accidentally slipping out. The functionality of the drawstring allows for quick and simple sealing, making the bag extremely practical for both everyday and professional use.
The customization with the Coltelleria Collini logo imprinted on the bag not only elevates its aesthetic appearance, but also transforms it into a sign of belonging to our community of enthusiasts and customers.
CC-BAGMF -
Fabrizio "Silvester" Silvestrelli - Custom CSFK - Black RWL34 - handmade knife
Knife handmade, designed and produced in only 10 copies (5 CPM-S30V steel sandblasted and 5 in RWL-34 steel coated TIN) from the known knifemaker Fabrizio "Silvester" Silvestrelli in collaboration with Collini Cutlery.
Further the CSFK feature is the ability to change at will the manicatura the same between the grips included in the package: Micarta Loveless, G10 or Black Paracord Camouflage. The knife can also be deprived of the grips to be used as a spearhead or to minimize the footprint thickness.
Intended use: tactical / collection
Type of production: made entirely by hand, limited and numbered
Production Country: Italy
Blade: stainless steel full-tang RWL-34 60 / 61HRC
Surface treatment: surface coating TIN "Advance Top" - Multi-layer aluminum and amorphous carbon titanium - Microhardness (HV 0.05): 3500 Vickers
Handle: Micarta Loveless / G10 / Paracord
Blade length: 135mm.
Blade Thickness: 5.5mm.
Overall length: 250mm.
Weight: 225g.
Sheath: Cordura, made in the USA, made by Blackhawk
Notes: knife made by the cutler Fabrizio "Silvester" Silvestrelli in only 5 specimens - certificate of guarantee and authenticity - key to remove the grips9005 -
Fabrizio "Silvester" Silvestrelli - Custom CSFK - CPM-S30V - handmade knife
Knife handmade, designed and produced in only 10 copies (5 CPM-S30V steel sandblasted and 5 in RWL-34 steel coated TIN) from the known knifemaker Fabrizio "Silvester" Silvestrelli in collaboration with Collini Cutlery.
Further the CSFK feature is the ability to change at will the manicatura the same between the grips included in the package: Micarta Loveless, G10 or Black Paracord Camouflage. The knife can also be deprived of the grips to be used as a spearhead or to minimize the footprint thickness.
Intended use: tactical / collection
Type of production: made entirely by hand, limited and numbered
Production Country: Italy
Blade: full tang CPM-S30V Stainless Steel 60 / 61HRC
Surface treatment: glass micropallinatura
Handle: Micarta Loveless / G10 / Paracord
Blade length: 135mm.
Blade Thickness: 5.5mm.
Overall length: 250mm.
Weight: 225g.
Sheath: Cordura, made in the USA, made by Blackhawk
Notes: knife made by the cutler Fabrizio "Silvester" Silvestrelli in only 5 specimens - certificate of guarantee and authenticity - key to remove the grips9006 -
Work Sharp - WSGFS - 20° Guided Field Diamond and Ceramic Sharpener - Manual Sharpener
Guided field sharpener is a complete solution for sharpening in the field or at home
Designed exclusively for sportsmen and knife users who need a complete, robust and compact manual sharpening solution.
Incorporates 5 sharpening and honing stages, each with built-in angle guides to achieve uniform sharpening across the blade. The 20° guides, 320 and 600 grit diamond, fine ceramic rods, and 25° leather stropping combine to provide a one-stop solution from repair to creating a well-sharpened and polished knife.
The Guided Field Sharpener also sharpens serrations and fish hooks, and the removable, magnetically attached diamond plates reveal a cavity for storing additional tools useful to you.
- Sturdy plastic construction with non-slip rubber inserts
- Coarse diamond stone with #320 grit and 20° guided angle
- Fine diamond stone with #600 grit and 20° guided angle
- Ceramic sharpener with 3 positions (roughing, polishing and fish hooks) with 20° guided angle
- Leather part for stropping and polishing to blades, with 25° guided angle
- Small ceramic sharpener for serrated blades
- Hole for lanyard or stringWS-WSGFS -
Midgards Messer - Locking Valhalla folding knife - PRIVATE COLLECTION - knife
Knife from a private collection
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, limited edition to 150 pieces
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:
* Sheath:
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratoryIntended use: Collection / Survival
Type of production: industrial
Blade: CPM D2 steel
Country of production: Germany
Handle: in G10
Blade length: 140mm.
Blade thickness: 4.8mm.
Total length: 310mm.
Weight: 520g.
Sheath: -
Notes: patented "knee" closure system made in ItalyAP-MDM015 -
Sergio Consoli - Folder Damascus Spirograph - Timascus and bronze Handle - N ° 454 - handcrafted knives
Intended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018Acknowledgments
Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize for best folding
but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.
Presentation of the craftsman
Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.
With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.
I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".
Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...
SC-454€0.00Only -50 leftOut of stock -
Mino Sharp - Rust Remover, Grey
Mino Sharp - Rust Remover, Grey Favoured by chefs around the world, the Japanese-designed MinoSharp Rust Remover from GLOBAL is an eraser-type rust remover and polisher that can be used on kitchen knives, pots and pans. Made with foamed urethane and alumina, the rectangular tool achieves a clean and shiny finish. Rectangular eraser-type rust remover and polisher For kitchen knives, pots and pans Achieves shiny finish Made with foamed urethane and alumina Made in Japan Colour: Grey Use with water. Use perpendicular strokes for best results to remove rust and to get a clean and shiny finish. Also effective for cleaning sinks, faucet handles, stoves, kettles, tea and coffee stains and tobacco stains from ashtrays.4501054 -
Coltelleria Collini - Animals Scissors straight blade - 8 ''
Scissors straight blade animals - 8 '' Scissors specifically designed for thinning and shearing of animals The scissors of the Style series are produced in high carbon content stainless steel, characterized by semi-convex blades and concave inner surface to significantly reduce the effort of the hand during cutting, thus guaranteeing a cutting performance easier, precise and lasting. Material: 420 Stainless steel brushed straight blade: Blade length: 9 cm Total length: 8 inch - 19 cm Sharpening: Plain / smooth Finger rest: Fixedcollini7,5 -
Coltelleria Collini - Large Zip Pouch + PVC Morale Patch - Round Grey Knives.it - Gadget
Pouch with double zip closure made of sturdy black padded nylon and Velcro surface to apply patches. Internally there are two compartments to insert certificates, maintenance tools or small spare parts.
Ideal for storing or safely transporting your favorite lockable or a small fixed blade knife. Also excellent for collecting purposes to preserve the original packaging of their knives.
External Dimensions: 240mm length - 110mm height
Internal Dimensions: 210mm length - 95mm height---------------------------------------
Flexible PVC patch, featuring 3D relief work.
100% original Collini Cutlery, exclusive product of our store.
Fixing with Velcro sewn on the back with laser-cut edges.Dimensions: 70mm in diameter - 5mm in thickness
CC-LP-GK -
Coltelleria Collini - Large Zip Pouch + PVC Morale Patch - White Knives.it - Gadget
Pouch with double zip closure made of sturdy black padded nylon and Velcro surface to apply patches. Internally there is a compartment to insert certificates, maintenance tools or small spare parts.
Ideal for storing or safely transporting your favorite lockable or a small fixed blade knife. Also excellent for collecting purposes to preserve the original packaging of their knives.
External dimensions: 200mm length - 95mm height
Internal Dimensions: 175mm length - 80mm height------------------------------------
Flexible PVC patch, featuring 3D relief work.
100% original Collini Cutlery, exclusive product of our store.
Fixing with Velcro sewn on the back with laser-cut edges.Dimensions: 91mm long - 23mm high - 4.2mm thick
CC-LP-WK -
Coltelleria Collini - Large Zip Pouch + PVC Morale Patch - Classic Logo Est. 1968 - Gadget
Pouch with double zip closure made of sturdy black padded nylon and Velcro surface to apply patches. Internally there are two compartments to insert certificates, maintenance tools or small spare parts.
Ideal for storing or safely transporting your favorite lockable or a small fixed blade knife. Also excellent for collecting purposes to preserve the original packaging of their knives.
External Dimensions: 240mm length - 110mm height
Internal Dimensions: 210mm length - 95mm height------------------------------------
Flexible PVC patch, featuring 3D relief work.
100% original ColtelleriaCollini, exclusive product of our store.
Fixing with Velcro sewn on the back with laser-cut edges.Dimensions: 73mm in length - 36mm in height - 4.8mm in thickness
CC-LP-OV -
Coltelleria Collini - Small Zip Pouch + PVC Morale Patch - Round Grey Knives.it - Gadget
Pouch with double zip closure made of sturdy black padded nylon and Velcro surface to apply patches. Internally there is a compartment to insert certificates, maintenance tools or small spare parts.
Ideal for storing or safely transporting your favorite lockable or a small fixed blade knife. Also excellent for collecting purposes to preserve the original packaging of their knives.
External dimensions: 200mm length - 95mm height
Internal Dimensions: 175mm length - 80mm height------------------------------------
Flexible PVC patch, featuring 3D relief work.
100% original ColtelleriaCollini, exclusive product of our store.
Fixing with Velcro sewn on the back with laser-cut edges.Dimensions: 70mm diameter - 5mm thickness
CC-SP-GK -
Coltelleria Collini - Small Zip Pouch + PVC Morale Patch - White Knives.it - Gadget
Pouch with double zip closure made of sturdy black padded nylon and Velcro surface to apply patches. Internally there is a compartment to insert certificates, maintenance tools or small spare parts.
Ideal for storing or safely transporting your favorite lockable or a small fixed blade knife. Also excellent for collecting purposes to preserve the original packaging of their knives.
External dimensions: 200mm length - 95mm height
Internal Dimensions: 175mm length - 80mm height------------------------------------
Flexible PVC patch, featuring 3D relief work.
100% original Collini Cutlery, exclusive product of our store.
Fixing with Velcro sewn on the back with laser-cut edges.Dimensions: 91mm long - 23mm high - 4.2mm thick
CC-SP-WK -
Coltelleria Collini - Small Zip Pouch + PVC Morale Patch - Classic Logo Est. 1968 - Gadget
Pouch with double zip closure made of sturdy black padded nylon and Velcro surface to apply patches. Internally there is a compartment to insert certificates, maintenance tools or small spare parts.
Ideal for storing or safely transporting your favorite lockable or a small fixed blade knife. Also excellent for collecting purposes to preserve the original packaging of their knives.
External dimensions: 200mm length - 95mm height
Internal Dimensions: 175mm length - 80mm height------------------------------------
Flexible PVC patch, featuring 3D relief work.
100% original ColtelleriaCollini, exclusive product of our store.
Fixing by Velcro sewn on the back with laser-cut edges.Dimensions: 73mm in length - 36mm in height - 4.8mm in thickness
CC-SP-OV -
Coltelleria Collini - Curved blade animal shears - 9 ''
Coltelleria Collini - Curved blade animal shears - 9 '' Scissors specifically designed for thinning and shearing of animals The scissors of the Style series are produced in high carbon content stainless steel, characterized by semi-convex blades and concave inner surface to significantly reduce the effort of the hand during cutting, thus guaranteeing a cutting performance easier, precise and lasting. Material: 420 Stainless steel brushed Curved blade: Blade length: 11 cm Total length: 9 inch - 21 cm Sharpening: Plain / smooth Finger rest: Fixed Each scissor is controlled by our laboratory in order to ensure a perfect cut.collini21 -
Coltelleria Collini - Curved blade animal shears - 8,5 ''
Coltelleria Collini - Curved blade animal shears - 8,5 '' Scissors specifically designed for thinning and shearing of animals The scissors of the Style series are produced in high carbon content stainless steel, characterized by semi-convex blades and concave inner surface to significantly reduce the effort of the hand during cutting, thus guaranteeing a cutting performance easier, precise and lasting. Material: 420 Stainless steel brushed Curved blade: Blade length: 10,5 cm Total length: 8,5 inch - 20 cm Sharpening: Plain / smooth Finger rest: Fixed Each scissor is controlled by our laboratory in order to ensure a perfect cut.collini20 -
Nepal kukri - Sirupate 15 - WITH ENGRAVING - wooden handle - Nepali Knife
Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood
Finishes: Brass
Blade length: 250 mm.
Blade thickness: 10 mm.
Total length: 380 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 468g. (602g with scabbard)
Sheath: in leather and wood
Notes: Original Nepalese knife entirely handmadeSIRU-15-INCISO -
Artisan Kukri - Long 18 - WITH ENGRAVING - Nepalese knife
Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.
Blade: Carbon steel, with incisions
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood engraved
Finishes: Brass
Blade length: 160 mm.
Blade thickness: 8 mm.
Overall length: 280 mm.
Karda: 55 mm.
Chakmak: 55 mm.
Weight: 224g. (308g inclusive sheath)
Sheath: engraved wood and brass
Notes: Original Nepalese knife entirely handmadeL18-INC -
Coin knife - Meiji Dragon Yen 1870-1914 - multipurpose with blade, scissor and file
Japanese multipurpose made of blade, scissor and file, inserted inside two coins that faithfully reproduce the Japanese Yen coined during the Meiji period 1870-1914.
Features:
coin diameter: 38mm.
weight: 30 gr.
blade length: 2cm
thickness: 5.5 mm
blade material: 420J2 steel
History of the coin:
The introduction of the yen occurred in 1872 by the Meiji government and replaced by an excessively complex monetary system of the Edo period.Initially, the yen was minted in gold, until 1888 and then moved to silver, until 1914BDYB37 -
Nepal kukri - Sirupate 16 wooden handle - Knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Manicure: wood
Finishes: Brass
Blade length: 260 mm.
Blade thickness: 9.4 mm.
Total length: 400 mm.
Karda: 110 mm.
Chakmak: 110 mm.
Weight: 426g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by handne-siru-16 -
Collini - Curved blade animal scissors - 8 ''
Curved blade animal scissors - 8 '' Scissors specially designed for pruning and shearing of animals The scissors of the Style series are made of stainless steel with a high carbon content, characterized by semi-convex blades and a concave internal surface to significantly reduce the effort of the hand during cutting, thus guaranteeing an easier, precise and long-lasting cutting performance. Material: Brushed stainless steel 420 Curved blade Blade length: 9 cm Total Length: 8 Inches - 19 cm Sharpening: FlatEach scissor is controlled by our laboratory in order to ensure a perfect cut
collini32 -
Coltelleria Collini - Professional animal scissors - for thinning 7"
Scissors specially designed for animal thinning
The scissors are manufactured from high-carbon stainless steel and feature serrated blades, thus ensuring easier, more precise and longer-lasting cutting performance.
Material:420 satin-finished stainless steel
Blades:2 toothed blades
Material: polished 420 stainless steel
Blades:toothed
Blade Length: 8 cm
Total Length: 7 Inches - 18 cm
Each scissor is checked by our in-house laboratory in order to ensure a perfect cutRing colors may vary from the photos.
collini031 -
Nepal kukri - Sirupate 17 wooden handle - knife
Lame: acier au carbone
Conformation: Dui Chirra
Kauri: Découverte
Aunlo-Bal: des motifs en noir et or gravé d'un dessin d'un soleil
Poignée: Bois
Finitions: laiton
Longueur de la lame: 225 mm.
Épaisseur de la lame: 8,5 mm.
Longueur totale: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Poids: 350g.
Gaine: cuir et bois
Notes: couteau d'origine népalaise fait entièrement à la mainne-siru17 -
Kukri nepal - Nepal Army 007 horn handle - knife
Blade: Carbon Steel
Handle: horn
Blade length: 225 mm.
Blade Thickness: 10 mm.
Overall length: 350 mm.
Weight: without covers g. 375 - g with sheath. 504
Sheath: leather and wood, handmade
Notes: every knife and 'entirely handmade in Nepal and also includes two small knives.ne-army-c -
Kukri nepal - Dhankute 16 wooden handle 010 - Knife
Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: Wood
Finishes: Brass
Blade length: 270 mm.
Blade Thickness: 10 mm.
Overall length: 400 mm.
Karda: 105 mm.
Chakmak: 105 mm.
Weight: 434g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by handne-dhan16 -
Nepal kukri - Sirupate 15 wooden handle 009 - Knife
Lame: acier au carbone
Conformation: Dui Chirra
Kauri: Découverte
Aunlo-Bal: des motifs en noir et or gravé d'un dessin d'un soleil
Poignée: Bois
Finitions: laiton
Longueur de la lame: 225 mm.
Épaisseur de la lame: 8,5 mm.
Longueur totale: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Poids: 350g.
Gaine: cuir et bois
Notes: couteau d'origine népalaise fait entièrement à la mainne-sir-15 -
Kukri nepal - Balance 006 wooden handle - knife
Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: engraved patterns in black and gold with a drawing of a sun
Handle: Wood
Finishes: Brass
Blade length: 225 mm.
Blade Thickness: 8.5 mm.
Overall length: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 350g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by handne-bal-l -
Collini - Curved blade animal scissors - 8 ''
Curved blade animal scissors - 8 '' Scissors specially designed for pruning and shearing of animals The scissors of the Style series are made of stainless steel with a high carbon content, characterized by semi-convex blades and a concave internal surface to significantly reduce the effort of the hand during cutting, thus guaranteeing an easier, precise and long-lasting cutting performance. Material: Brushed stainless steel 420 Curved blade Blade length: 9 cm Total Length: 8 Inches - 19 cm Sharpening: FlatEach scissor is controlled by our laboratory in order to ensure a perfect cut
collini030 -
Coltelleria Collini - Chef's tongs for food - Sushi - 16cm
Coltelleria Collini - Chef's tongs for food - Sushi - 16cm
CHEF'S TONGS
Stainless steel chef's tongs, useful to check the cooking of food and to make it easier to grip. Its curved shape allows you to move and check the food more precisely, especially for the plating and decoration of sweet or savoury dishes.
Ideal especially for preparing sushi dishes.
Technical characteristics:
Dishwasher safe
Length: 16cm.
collini0012-small -
Kukri Artisan - Panawal wood - Nepalese knife
Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Covered
Aunlo-Bal: -
Handle: Wood
Blade length: 230mm.
Blade Thickness: 11mm.
Overall length: 395mm.
Karda: horn length. tot. 12mm.
Chakmak: horn length. tot. 12mm.
Weight: 690g.
Sheath: wood and leather
Notes: Nepalese original knife made entirely by handPANA21 -
Kukri Artisan - Panawal horn - Nepalese knife
Kukri Artisan - Panawal horn - Nepalese knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade thickness: 9mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 482g.
Sheath: wood and leather
Notes: Original Nepalese knife made entirely by handPANA22 -
Kukri Artisan - Ganjawala multipurpose horn 18 - Nepali knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade Thickness: 8mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 434g.
Sheath: wood and leather decorated
Notes: Knife Original Nepalese entirely handmade - 7 accessories included in the sheathGAN18 -
Kukri Artisan - Dhankute Silver - Nepalese knife
Kukri Artisan - Dhankute Silver - Nepalese knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn and silver
Blade length: 320mm.
Blade Thickness: 10mm.
Overall length: 440mm.
Karda: length. tot. 6.3mm.
Chakmak: length. tot. 6.3mm.
Weight: ì (774g. Sheath)
Sheath: horn and Nepalese symbols silver
Notes: Original Nepalese knife made entirely by handDHAN2 -
Kukri Artisan - Dhankute 11 "horn - Nepalese knife
Kukri Artisan - Dhankute 11 "horn - Nepalese knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn and brass
Blade length: 220mm.
Blade Thickness: 8mm.
Overall length: 340mm.
Karda: horn length. tot. 65mm.
Chakmak: horn length. tot. 65mm.
Weight: 434g.
Sheath: Nepalese brass horn with symbols
Notes: Original Nepalese knife made entirely by handDHAN11 -
Kukri Artigianale - Bahadur Gripper corno - coltello nepalese
Lama: Acciaio al carbonio
Conformazione: Lama full tang
Kauri: Scoperto
Aunlo-Bal: singola linea nera incisa
Manicatura: Corno nero di bufalo
Finiture: -
Lunghezza lama: 250 mm.
Spessore della lama: 6 mm.
Lunghezza totale: 375 mm.
Peso: 680g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a manoBAHA20 -
Kukri Artisan - Chainpure 13 - Nepalese knife
Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.
Blade: Carbon steel, with incisions
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood engraved
Finishes: Brass
Blade length: 160 mm.
Blade thickness: 8 mm.
Overall length: 280 mm.
Karda: 55 mm.
Chakmak: 55 mm.
Weight: 224g. (308g inclusive sheath)
Sheath: engraved wood and brass
Notes: Original Nepalese knife entirely handmadeCHAIN13 -
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by handCHAIN15 -
Coltelleria Collini - Animal shearing scissors with straight perforated blade - 8''
Coltelleria Collini - Animal shearing scissors with straight perforated blade - 8''
Scissors specially designed for shearing animals. The scissors of the Style series are made of high carbon stainless steel and feature perforated blades to significantly reduce hand strain during cutting, thus ensuring an easier, more precise and long-lasting cutting performance.
Material: 420 stainless steel
Straight blade: Perforated
Blade length: 9 cm
Total Length: 8 Inches - 19 cm (with finger rest 21 cm)
Sharpening: Flat Finger rest: Fixed
Each scissor is checked by our internal laboratory in order to guarantee a perfect cut.
colliniblack -
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by handKU027