Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
CRKT - M16-12LE knife Small Law Enforcement Tanto - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: small marks on tip
* Marks on handle: clip slightly marked
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryBlade: Teflon-coated AUS-8 high-carbon 57/58HRC stainless steel
Handle: Zytel grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Total length: 185mm.
Weight: 97g.
Closure: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety catchAP-CM16-12LE -
Fallkniven - F1 Pro Knife Survival Kit - USED - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory
Intended Use: Hiking / All round utilityBlade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather caseF-F1PRO-CP -
CRKT - P.S.D. II (Particle. Separation. Device.) by Hammond - AUS-10 & Brown G10 - 7910 - knife
Jim Hammond's original P.S.D. earned its name (Particle. Separation. Device.) for its ability to cut anything, anywhere. The P.S.D. II brings that same capability to a smaller, more portable folding knife, reducing the overall length by more than an inch. The blade is made of corrosion-resistant AUS10 with assisted opening on IKBS ball bearings that ensure quick and easy one-handed operation.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade Treatment: Black Oxide
Handle: G10
Blade Length: 76mm.
Blade thickness: 2.8mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 102g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC7910 -
CRKT - A.B.C. (All. Bases. Covered.) by Hammond - 12C27 & Black G10 - 2606 - knife
Jim Hammond's A.B.C. (All. Bases. Covered.) makes its return in an even more versatile form. It is now a folder, bringing the varied capabilities of the original fixed blade into a more convenient and compact design. With its assisted opening and IKBS pads, it's always ready for action at any time, while the G10 handle provides a strong grip even in adverse weather conditions.
Intended Use: Tactical
Production Type: Industrial
Country of Production: China
Blade: Sandvik 12C27 stainless steel
Blade treatment: Black Oxide
Handle: G10
Blade Length: 85.9mm.
Blade thickness: 3.1mm.
Length closed: 116mm.
Total length: 203mm.
Weight: 110g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC2606 -
Spartan Blades - Talos Liner Lock knife - Black - Harsey Design - SFBL7BK - kitchen knife
The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.
All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.
Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySFBL7BK -
Spartan Blades - Poros knife - G10 Green - 154CM - SFL11GR - knife
The POROS flipper was designed by Curtis Iovito as a robust and large-sized flipper. The high grind lines of this blade, combined with a sharp and penetrating tip, make it a reliable companion for everyday carry.
Its quick flipper action is assisted by IKBS bearings for that "Snap" you're looking for! Its distinctive scallops are not only beautiful to look at but also ensure a secure grip. The deep pocket clip maintains a low profile while keeping your blade ready for use when needed. The blade is made of 154CM stainless steel with a black titanium nitride coating; the SS hardware and liner have a black electroplated powder coating.
Intended use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in 154CM stainless steel 58/60 HRC
Blade treatment: Black Titanium Nitride Coating
Handle: OD Green G10
Blade length: 89mm.
Blade thickness: 4mm.
Closed length: 97mm
Total length: 230mm.
Weight: 147g.
Closure: Liner Lock
Clip: in stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos. Design: Curtis Iovito
Notes: The Field Grade series with Bronze-colored box identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFL11GR -
Spartan Blades - Astor by Les George - Carbon FIber & CTS-XHP - SFBL8CF - knife
The ASTOR is our first folding knife in collaboration with prolific knife maker Les George, winner of Blade Show 2021 as "Imported Knife of the Year."
The ASTOR was built as a sturdy working knife! With its sturdy G-10 grips, thick liner-lock and high-strength CTS-XHP steel blade, the ASTOR is the perfect knife for those jobs that require a little extra toughness.
All of our Bronze Field Grade productions incorporate our new "Oil Infused Bronze Bushing System" or "OIBBS"! Our sintered bronze bushings are impregnated with oil, which reduces friction on the blade, thus ensuring that the blade opens smoothly, even when firmly held. This system is especially useful for low speeds, intermittent use and irregular loads such as those found on folding knives.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Taiwan
Blade: CTS-XHP 58/60 HRC stainless steel
Blade treatment: Stonewashed
Handle: Composite made of G10 and Carbon Fiber
Blade Length: 89mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 145g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFBL8CF -
Spartan Blades - Astor by Les George - Green G10 & CTS-XHP - SFBL8GR - knife
The ASTOR is our first folding knife in collaboration with prolific knife maker Les George, winner of Blade Show 2021 as "Imported Knife of the Year."
The ASTOR was built as a sturdy working knife! With its sturdy G-10 grips, thick liner-lock and high-strength CTS-XHP steel blade, the ASTOR is the perfect knife for those jobs that require a little extra toughness.
All of our Bronze Field Grade productions incorporate our new "Oil Infused Bronze Bushing System" or "OIBBS"! Our sintered bronze bushings are impregnated with oil, which reduces friction on the blade, thus ensuring that the blade opens smoothly, even when firmly held. This system is especially useful for low speeds, intermittent use and irregular loads such as those found on folding knives.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Taiwan
Blade: CTS-XHP 58/60 HRC stainless steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 145g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFBL8GR -
Spartan Blades - Talos Liner Lock knife - Green - Harsey Design - SFBL7GR - kitchen knife
The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.
All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.
Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySFBL7GR -
Spartan Blades - Spartan-Ka-Bar - FDE MagnaCut & Leather - SB54DEBKLTBK - knife
On December 9, 1942, during the Second World War, KA-BAR presented a knife to the United States Marine Corps hoping it would become the standard weapon. In collaboration with the Marine Supply Department, the project was revised, and production began on an improved combat and utility knife.
During the war, USMC KA-BAR knives gained such recognition for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, and the wars in Iraq and Afghanistan.
In 2019, KA-Bar partnered with Spartan Blades to form Pineland Cutlery. CEO John Stitt aimed to create a "KA-BAR" with improved strength, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.
CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries and specifically designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: ZrN Flat Dark Earth
Handle: Kraton G with stainless steel 301 guard and tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Black leather
Packaging: Cardboard box with Spartan Blades logos
Notes: Please note that the Flat Dark Earth (FDE) coated blade, when inserted or removed from the leather sheath, may show streaks or stains due to the dye used for the sheath. The blade can be cleaned with petroleum or acetone, re-oiled (e.g., with WD40 or light mechanical oil), and dried with a clean cloth to restore the original coating finish.SB54DEBKLTBK -
Spartan Blades - Spartan-Harsey Fighter - SBSL006BK - Knife
Produced in Olean, NY, in collaboration with the skilled people at KA-BAR knives, the Spartan-Harsey Fighter is born from the partnership between William W. Harsey Jr. and Spartan Blades. The intention behind this knife was to combine the blade of a US military combat/utility knife with the contoured handle that has become a hallmark of Mr. Harsey's designs. This knife is a no-nonsense combat blade.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: 1095 carbon steel 56/58HRC
Blade Finish: Black Powder Coating
Handle: Injection-molded Thermoplastic
Blade Length: 155mm
Blade Thickness: 4.9mm
Overall Length: 292mm
Weight: 334g
Sheath: Thermoplastic, with belt attachment and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by William W. Harsey Jr. - The Professional Grade series with Silver packaging identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience to keep prices affordable for the public without sacrificing USA-made production.SBSL006BK -
Spartan Blades - Machai knife Green - Fixed Blade Pro Grade- SBSL002BKGR - Knife
Machai - A fitting name for this large cutting tool. In Greek mythology, the Machai were the demons (spirits) of battle and combat.
The high weight and recurved profile of this flat ground blade make it an excellent hatchet. The Machai has a full-tang construction and a handle that ensures a forward balance in the user's hand.
The textured Micarta canvas ergonomic handle ensures a secure and comfortable grip, whether wet or dry. Made by the good people at KA-BAR Knives; in Olean, NY, USA.
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: in 1095 carbon steel 56/58HRC
Blade finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade length: 165mm.
Blade thickness: 4.8mm.
Total length: 295mm.
Weight: 308g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E compatible belt attachments and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by Iovito - The Professional Grade series with a Silver-colored box identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with the production experience of Ka-Bar to keep public prices affordable without having to give up a made in USA production.SBSL002BKGR -
Spartan Blades - Harsey TT - Kydex, Flat Dark Earth and Camo Micarta - SB43DECMKYTN - knife
The Harsey TT (Tactical Trout) is designed to be a very comfortable and sturdy medium-sized knife for most field tasks and defensive use. The size of the TT makes it easy to carry and handle.
The blade profile provides a clean cut with excellent tip strength. The full tang and handle of the Harsey TT provide neutral balance in the user's hand. The ergonomically shaped, linen Micarta handle provides a comfortable and secure grip when dry or wet. The pommel has a lanyard hole in the center of the angled tip. The TT is an excellent universal fixed blade, well balanced in size, function and feel. In our opinion, one of William Harsey's best designs.
After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.
Intended Use: Tactical/Military
Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade finish: ZrN Flat Dark Earth
Handle: Linen Micarta
Blade length: 114mm.
Blade thickness: 4.8mm.
Total length: 229mm.
Balance: on the guard branch
Weight: 209g.
Sheath: thermoformed in Kydex
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySB43DECMKYTN -
Spartan Blades - Harsey Folder - 3.25" Chad Nichols Damascus Blue Anodization - knife
This is the latest knife produced in terms of time by Spartan Blades in collaboration with legendary knife maker William "Bill" Harsey Jr.
The SHF 3.25 is the knife many of you have been waiting for! A reliable 6AL4V titanium frame-lock pocket knife with a handcrafted 3.25" damascus steel blade made by Chad Nichols. Easy to carry and comfortable in the hand, this is a truly exceptional knife. Constructed like its award-winning big brother the SHF 3.25 is made entirely of 6AL-4V titanium, except for the pivot, blade and arbor.
This medium-sized folding knife features a reversible pocket clip and two thumb studs that allow it to be carried in either the right or left hand. If you are looking for a high-quality, well-designed folding knife, this is one you should consider!
Intended Use: Collector/Sportsman
Type of manufacture: MidTech
Country of manufacture: USA
Blade: handcrafted stainless damascus steel, by Chad Nichols
Blade treatment: -
Handle: titanium 6AL4V
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Length closed: 98.5mm.
Total length: 181mm.
Weight: 82g.
Closure: FrameLock
Clip: anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySF10CNBL -
Spartan Blades - Moros Knife - Kydex, DLC Flat Black and Black Micarta - SB53BKBKKYBK - knife
The Moros is an excellent choice for field or tactical use. This well-balanced blade is the perfect blend of size and performance. It's light enough to carry around without hassle, yet sturdy enough to handle a range of everyday tasks. The tip profile is flat with a tapered upper edge ensuring excellent cutting with good penetrating force. The full tang and grip of the Moros provide a neutral balance, making it light in the hand. The ergonomic and textured Micarta canvas grip ensures a comfortable and secure grip whether dry or wet.
After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had been designing and drawing knives for friends in special forces for years, and Mark, who had always dealt with military and tactical equipment while working in the "Green Berets," decided to combine their skills and passion with the goal of building innovative and functional knives using high-quality materials and entirely made in the United States.
Intended use: Tactical/Military
Type of production: Mid Tech
Country of production: USA
Blade: in CPM-S45VN stainless steel 59/61HRC
Blade finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 134mm.
Blade thickness: 4.8mm.
Total length: 254mm.
Balance: on the guard branch
Weight: 203g.
Sheath: thermoformed in Kydex
Packaging: Cardboard box with Spartan Blades logosSB53BKBKKYBK -
Spartan Blades - Moros - Kydex, DLC Flat Black and Green Micarta - SB53BKGRKYBK - knife
The Moros is an excellent choice for field or tactical use. This well-balanced blade is the perfect blend of size and performance. Light enough to carry without bothering, yet strong enough to handle a variety of daily tasks. The tip profile is flat with a tapered top edge that provides an excellent cut with good penetration force. The Moros' solid tang and handle provide neutral balance, making it light in the hand. The ergonomic, textured Micarta canvas handle provides a comfortable and secure grip when dry or wet.
After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.
Intended Use: Tactical/Military
Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade Finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 134mm.
Blade thickness: 4.8mm.
Total length: 254mm.
Balance: on the guard branch
Weight: 203g.
Sheath: thermoformed Kydex.
Packaging: cardboard box with Spartan Blades logos
Notes: Design by Curtis IovitoSB53BKGRKYBK -
CRKT - Pilar Large - Blackwashed Frame Lock Flipper by Vox - 5315KS - folding knife
Intended use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Blackwashed
Handle: Blackwashed stainless steel
Blade length: 67.8mm.
Blade thickness: 3.8mm.
Length closed: 101.5mm.
Total length: 170mm.
Weight: 119g.
Closure: Frame Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5315KS -
CRKT - Overland Compact Knife by T. J. Schwarz - 6277 - knife
The compact folding knife ready to tackle any terrain.
It may be small, but just like the upgraded 4x4 vehicles that inspired its name, the Overland Compact is exaggeratedly built and ready to tackle the toughest conditions. It takes the design cues and materials of the full-size Overland and puts them into an ultraportable format that practically disappears into a pocket. When it's time to stop the convoy and set up camp, this knife can prepare light food and chop up the perfect marshmallow stick.
Intended Use: Sporty
Production type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Blackwashed
Handle: G10 and Blackwashed stainless steel
Blade Length: 57mm.
Blade thickness: 3.2mm.
Length closed: 81mm.
Total length: 137mm.
Weight: 88g.
Closure: FrameLock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by T. J. SchwarzC6277 -
CRKT - Squid Compact by Lucas Burnley - 2485K - knife
This small knife is a big deal. The Squid is known as the perfect knife for everyday use, expertly combining simplicity, usability and performance.
Neither brash nor flashy, it is the humble handyman of the knife world: reliable, solid and extraordinarily capable. Now, renowned designer Lucas Burnley has reworked it into a smaller, nimbler version, the Squid Compact. This reasonably priced folding knife is for everyone.
* Assisted opening: The assisted flipper allows rapid blade opening.
* Smooth opening: The IKBS™ ball bearing system ensures maximum smoothness.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily
* Maximum control: Grooves on the back of the blade to ensure a secure and comfortable grip
* Maximum durability: Stainless steel handle withstands heavy use.
* Low profile: Pocket clip ensures safe carrying
* Accessory options: Hole for lanyard or key ring
Intended Use: EDC
Production type: Industrial
Country of manufacture: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: BlackWashed
Handle: BlackWashed stainless steel
Blade Length: 44mm.
Blade thickness: 2.6mm.
Length closed: 74mm.
Total length: 118mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS opening system on pinball-type bearings, spring preload assistedC2485K -
CRKT - Tuna Compact by Lucas Burnley - 2522 - knife
The little fish that rules every pond. Though small, the Tuna Compact evokes the power of one of the world's largest and fastest fish.
It takes the subtle elegance of designer Lucas Burnley's original Tuna and shrinks it into an ultra-compact folding knife. With a profile that suggests strong forward momentum and a blade shape that resembles a deep-sea carnivore, this everyday knife slices through packs and boxes faster than a bluefin tuna slices through waves on a taut line.
* Smooth opening: IKBS™ ball-bearing motion allows for a smooth blade opening.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily.
* Easy opening: The thumb engagement pin allows for quick one-handed opening.
* Exceptional grip: G10 handle provides exceptional grip in all conditions
* Brute force: Fame Lock system uses a thick locking bar to hold the blade in place
* Low profile: Pocket clip ensures safe and secure carrying away from prying eyes
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: StoneWashed
Handle: G10 and BlackWashed stainless steel
Blade Length: 69mm.
Blade thickness: 3.6mm.
Length closed: 97mm.
Total length: 163mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS ball bearing opening systemC2522 -
CRKT - CEO MicroFlipper Sheepfoot by Rogers - 7083 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 56mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 140mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7083 -
CRKT - CEO MicroFlipper Drop Point by Rogers - 7081 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 60mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 143mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7081 -
Fallkniven - F1 Wolf - VG-10W Laminated and Leather Sheath - knife
New "Wolf" version using a steel enriched with 1.25% Tungsten (also known as Wolfram in chemistry) which makes the edge tougher, more resilient and provides greater sharpness retention.
Intended use: tactical/military/huntingBlade: full tang in San-Mai VG-10Wolf / 420J2 59HRC stainless steel
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: set back 2.5cm from the lower guard branch.
Weight: 150g.
Sheath: leather
Notes: official knife of Swedish Air Force pilots since 1995.F-F1LW -
Fallkniven - F1xB Utility Knife - Elmax Steel - Tungsten Carbide Finish - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of Production: Japan
Blade: full tang, stainless steel Elmax at 61/62HRC
Blade finishing: black coating (Tungsten Carbide)
Handle: Thermorun
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XBElmax -
Fallkniven - F1x Utility Knife - Elmax Steel - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XElmax -
CRKT - Clever Girl Kukri Knife - 2710 - Machete
Intended Use: Hiking / Heavy Duty
Production Type: industrial
Blade: Full Tang in carbon steel SK-5 with Black Powder treatment
Country of Production: Taiwan
Handle: G-10
Blade Length: 196mm.
Blade thickness: 4.8mm.
Total length: 336mm.
Balance: Advanced
Weight: 402g.
Sheath: thermoplastic
Packaging: cardboard box with CRKT logos
Notes: Design by Austin McGlaunCR2710 -
CRKT - Folts Minimalist Drop Point Black - 2384K - Knife
Intended Use: Neck Knife
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 55mm.
Blade thickness: 2.6mm.
Total length: 133mm.
Weight: 49g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan FoltsCR2384K -
Fallkniven - FDC - Double sharpener - diamond (25 microns) and ceramic (9 microns) - sharpening accessory
Support with two different bars, one in ceramic and one in diamond.
The yellow diamond sharpening stone (25 microns) is used to make a fine sharpening, with the white ceramic stone (9 microns) the edge of the knife is polished in order to obtain a razor-sharp edge.
For cleaning, use some dish soap and hot water.
Dimensions of the diamond / ceramic part:
10 cm x 2 cm
Total size open with plastic handle:
22 cm
Closed size:
12 cm x 3 cm
Weight: 65 gr
F-FDC -
Fallkniven - FDD - Double diamond sharpener - 25 and 44 microns - sharpening accessory
Diamond sharpening with two different sharpening grits.
The yellow surface consists of titanium and aluminum nitride which greatly prolongs the life of the sharpener. The rough side (44 microns) is used to recover more damaged cutting edges, while the fine side (25 microns) is used for precision sharpening.
For cleaning, use dish soap and warm water.
Like all diamond sharpeners, this whetstone is a little rough at first, but gets smoother after a period of use.
Dimensions of the diamond part:
10 cm x 2 cmTotal open size with plastic handle:
22 cmClosed size:
12 cm x 3 cm
Weight: 67 grF-FDD -
CRKT - Carson M16-13DSFG Tan Special Forces - PRIVATE COLLECTION - pocket knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks on Tan-colored finish, unnoticeable
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: China
Blade: Stainless steel AUS-8
Blade Finish: Tan Oxide
Handle: PVD steel folders with G10 Tan grips
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 150g.
Opening: Carson Flipper system
Closure: Liner Lock with auto LAWKS security system
Clip: multi-position, removable, Black Oxide stainless steel
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemM16-13DSFG-CP -
Fallkniven - PXLey Folding Knife - Elmax - Elforyn - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Elforyn with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steelF-PXLey -
Fallkniven - PXLbl Folding Knife - Elmax - Black Micarta - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Micarta with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steelF-PXLbm -
Fallkniven - P3Gic Folding Knife - Desert Ironwood - knife
Intended use: sporting
Type of production: industrial
Blade: Three layers rolled 3G steel (VG2 and SGPS at 62 HRC)
Blade finish: Satin finish
Country of Production: Japan
Handle: Stainless Steel 420J2 and Wood
Blade Length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 180mm.
Weight: 75g.
Closure: Liner Lock
Clip: Absent
Sheath: Nylon, with Velcro closure
Notes: -F-P3Gic -
Fallkniven - RL1EY - Elforyn - Folding Knife
The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, a giant of the American knife guild, who passed away in 2010.
Intended use: collectible/sporty
Blade: 59HRC Elmax stainless steel
Handle: 420J2 stainless steel and Elforyn inserts
Blade length: 67mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 165mm.
Weight: 72g.
Closure: Liner Lock
Clip: not present
Scabbard: Nylon
Notes: -F-RL1EY -
Spartan Blades - Damysus Green - Professional Grade - SBSL003BKGR - Knife
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: Carbon steel 1095 56/58HRC
Blade Finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade Length: 139mm.
Blade Thickness: 4.8mm.
Total length: 273mm.
Weight: 255g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E. compatible belt clip and push-button retention system.
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Note: Design by Iovito/Carey - The Professional Grade series with Silver box, identifies the American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience in order to keep prices affordable to the public without having to renounce to a made in USA production.SBSL003BKGR -
Spartan Blades - Damysus Black - Professional Grade - SBSL003BKBK - Knife
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: Carbon steel 1095 56/58HRC
Blade Finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade Length: 139mm.
Blade Thickness: 4.8mm.
Total length: 273mm.
Weight: 255g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E. compatible belt clip and push-button retention system.
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Note: Design by Iovito/Carey - The Professional Grade series with Silver box, identifies the American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience in order to keep prices affordable to the public without having to renounce to a made in USA production.SBSL003BKBK -
Fallkniven - RL1di knife - Desert Ironwood - knife
The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, giant of the American cutlers guild, who died in 2010.
Intended use: collection / sports
Blade: Elmax 59HRC stainless steel
Handle: 420J2 stainless steel and Ironwood inserts
Blade length: 67mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 165mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: nylon
Note:F-RL1DI -
CRKT - Techliner Super Shorty - TPENBOND2 - tactical pen
The Techliner™ Super Shorty pen is built to impress with a sleek, ergonomic body and magnetic ends that attach securely to whiteboards, desk legs and workbenches so it's always within reach.
Secure cap: Magnetic ends secure the cap and attach to surfaces
Strong and lightweight: Aluminum handle combines strength with minimal weight
Visually appealing: Blue anodized body
Compact size: Easy to carry
Write anywhere: Ink cartridge developed for extreme environmental conditionsMaterial: 6061 anodized aluminum with stainless steel clip
Rear base: Magnetic
Ink: Black with pressurized Schmidt Refill
Total length: 105mm.
Diameter: 11.7mm.
Weight: 19.8gTPENBOND2 -
CRKT - Freya by Elmer Roush - 2749 - Viking Axe
Intended Use: Sporting / Hiking
Production type: Industrial
Country of Production: Taiwan
Blade: Carbon steel 1055
Blade treatment: manganese phosphate
Handle: Walnut wood
Blade length: 88mm.
Blade thickness: 32mm.
Total length: 483mm.
Weight: 870g.
Scabbard: -
Notes: Design by Elmer RoushCR2749 -
CRKT - Berserker by RMJ Tactical - 2736 - Viking Axe
Intended Use: Sporting / Hiking
Production type: Industrial
Country of Production: Taiwan
Blade: Carbon steel 1055
Blade treatment: manganese phosphate
Handle: Walnut wood
Blade length: 118mm.
Blade thickness: 40mm.
Total length: 483mm.
Weight: 940g.
Scabbard: -
Notes: Design by by Ryan Johnson of RMJ TacticalCR2736 -
CRKT - Compano Carabiner by Bond - 9082 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15Mov
Blade finishing: Satin finish
Handle: 2Cr13 stainless steel with blackwash and bronze finish
Blade length: 37mm.
Blade thickness: 3.6mm.
Length closed: 82mm.
Total length: 117mm.
Weight: 62g.
Closure: Slipjoint
Clip: -
Package: Cardboard box with CRKT logos
Notes: Design by Mike Bond - Snap hook for attachment - Bottle openerCR9082 -
CRKT - Folts Minimalist Cleaver Blackout - 2383K - Knife
Intended Use: Neck Knife
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 54mm.
Blade thickness: 2.6mm.
Total length: 129mm.
Weight: 48g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan FoltsCR2383K -
CRKT - Pilar III by Vox - 5317 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: G10 and stainless steel with aluminum spacer
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 108mm.
Total length: 182mm.
Weight: 102g.
Closure: FrameLock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5317 -
CRKT - Carson M16-03BK - Bronze & Black Oxide - knife
Intended Use: Sporting / Tactical
Production Type: Industrial
Country of Production: China
Blade: Stainless steel 12C27 Sandvik
Blade treatment: Black Oxide
Handle: Stainless steel 2CR13 with nitriding in Bronze
Blade Length: 90mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 108g.
Opening: Carson Flipper system
Closure: Frame Lock
Clip: Multi-position, removable, in Black Oxide stainless steel
Package: Cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemCM16-03BK -
Fallkniven - Taiga Forester - TF1 - SanMai CoS Steel - Desert Ironwood - knife
Intended Use: Hiking / Hunting / Collection
Production type: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade Treatment: Satin finish
Handle: Desert Ironwood
Blade Length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 230g.
Sheath: zytel
Notes: -F-TF1Z -
Fallkniven - Taiga Forester - TF2 - SanMai CoS Steel - thermorun - knife
Intended use: Hiking / Hunting
Type of production: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade treatment: Satin finish
Handle: Thermorun
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 185g.
Scabbard: zytel
Notes: -F-TF2Z -
CRKT - CEO Bamboo by Rogers - 7096YGK - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: Nylon reinforced with fiberglass
Blade length: 79mm.
Blade thickness: 2.2mm.
Length closed: 113mm.
Total length: 194mm.
Weight: 59g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - IKBS ball bearing opening system - Winner of the 2019 Blade Show as "Best Buy Of The Year"C7096YGK -
Fallkniven - Taiga Hunter knife - TH - SanMai CoS Steel - thermorun - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.If you look at function and most value for money, the rubber-handle Taiga blades should be preferred. Regardless of the weather and wind, the rubber handle gives a really good grip and when it comes to the steel properties they are of course as good as the knives with wooden handles.Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -F-TH2Z -
Fallkniven - Taiga knife SK2L - SanMai CoS Steel - ironwood - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.As shown in the design, TH1 is a handmade knife with a handle in the very exclusive desert ironwood (lat. Olneya tesota). This species is not listed in CITES Annexes or the IUCN Red List of Endangered Species and is therefore legal to use. Like all natural materials, it varies in texture and color, making each knife an individual creation. A beautifully veined pattern may look attractive but a straight, patterned handle is actually stronger. Desert ironwood, which grows in the southwestern United States, has a somewhat peculiar quality – it is heavier than water, its density is 1.2 kg/dm³ which means it will sink. If you want to maintain or even increase the luster in the wood, treat it with log oil, furniture oil, bench oil or other type of wood oil containing linseed oil. The fact that the blade goes full width through the handle (so-called full tang blade) results in a very strong and reliable construction and gives a comfortable weight to the knife.Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -F-TH1Z -
CRKT - Tuna Knife by Burnley - 2520 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr14Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: G10 and Blackwashed stainless steel
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 114mm.
Total length: 195mm.
Weight: 105g.
Closing: FrameLock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas BurnleyC2520 -
CRKT - Piet by Vox - 5390 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass with anodized titanium spacer
Blade length: 68mm.
Blade thickness: 3.3mm.
Length closed: 95mm.
Total length: 164mm.
Weight: 71g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5390 -
Fallkniven - Embla knife SK2L - SanMai CoS Steel - ironwood - knife
Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -F-SK2L -
Fallkniven - S1x Survival Knife - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
CommunityF-S1X -
Fallkniven - S1xb Survival Knife Black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
CommunityF-S1XB -
CRKT - Pilar Large by Vox - 5315G - folding knife
Destination of use: Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin
Handle: Stainless Steel
Blade length: 67mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 170mm.
Weight: 98g.
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5315G -
EOS Elite Outfitting Solutions - Prawn Friction Folder Aluminum Blue - knives
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-A-B -
Fallkniven - MB - Modern Bowie - Satin SanMai CoS - knife
Destination of use: Hiking / Hunting
Blade: hidden tang, in CoS 60mm stainless steel
Country of production: Japan
Handle: Thermorun, with stainless steel guard
Blade Length: 254mm.
Blade thickness: 7.41mm.
Overall length: 387mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 565g.
Sheath: black leather
Notes: Fallkniven cardboard box, ABS sealed cushion with fallkniven logos, Fallkniven DC4 sharpening stone with leather caseF-MB -
EOS Elite Outfitting Solutions - Orca S - Grey Titanium - knife
Target: Tactical / EDC / Collection
Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-ORG -
CRKT - Hi Jinx Z by Ken Onion - K281KXP - PRIVATE COLLECTION - Pocket Knife
KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: like new
* Commercially available: discontinued
* Sharpening: factory sharpened
* Marks on the blade: None
* Marks on the handle: None
* Box: Present
* Scabbard: /
* Manuals, certificates and warranties: Available
* Tested and certified by our in-house laboratory.Intended Use: Sporting
Production Type: Industrial
Country of manufacture: China
Blade: Stainless steel 1.4116
Blade finish: Satin surface
Handle: GFN nylon
Blade length: 84 mm.
Blade thickness: 2.3 mm.
Length closed: 120 mm.
Total length: 203 mm.
Weight: 139 g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard box with CRKT logo
Notes: Ball bearing opening with IKBS system - Opening via Carson pinball system - Design by Ken OnionCK281KXP -
CRKT - Pilar by Vox - 5311 - folding knife
Intended use: Sports / EDC
Type of production: Industrial
Production Country: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: Stainless Steel
Blade length: 61mm.
Blade thickness: 3.5mm.
Closed Length: 90mm.
Overall length: 151mm.
Weight: 119g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5311 -
Fallkniven - Erna SK18 - BBQ Chef 18cm - professional kitchen knife
Recommended use: Barbecue, Vegetable, Raw Meat, Fish
Steel: Stainless Laminate CoS 60 HRC
Production Lama Japan
Overall length: 292mm.
Blade length: 180mm.
Blade thickness: 2.5mm.
Type of sharpening: flat
Type of construction: laminated with riveted handle
Handle: birch burl
Maintenance: not dishwasher safe
Packaging: bag with zip in leather and leather sheath marked FallknivenF-SK18 -
CRKT - Ken Onion Hootenanny - K300KXP - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Lama: Satin
Handle: Stainless steel 2Cr13 and grips FRN
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 116mm.
Overall length: 201mm.
Thick when closed: -
Balancing: -
Weight: 136g.
Closure: Frame Lock Stainless Steel 2Cr13
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design Ken Onion, opening system with ball bearing type IKBS opening type Carson FlipperCK300KXP -
CRKT - Burnley Squid - 2490 - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Blade: Stonewashed
Handle: Stainless Steel 2Cr13
Blade length: 54mm.
Blade thickness: 3mm.
Closed Length: 55mm.
Overall length: 114mm.
Thick when closed: 14mm.
Balancing: -
Weight: 96g.
Closure: Frame Lock Stainless Steel 2Cr13
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design Lucas BurnleyC2490 -
CRKT - Carson M16-12ZLEK Law Enforcement Zytel Folding Tanto - knife
Blade: Stainless steel AUS-8 high-carbon 57 / 58HRC Teflon
Handle: Zytel Grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Overall length: 185 mm.
Weight: 102 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety locks and AutoLAWKS guard Carson Flipper tagliacinture with integrated rear window breakerCM16-12ZLEK -
Fallkniven - FS3 FlipStone - Affiatore Ceramic and Diamond Pocket
Stone pocket , for sharpening , with a side ceramic 1 micron ( grain 15000 ) and with one side to the diamond 25 micron ( 600 grit ) . It has the shape of a folding knife , with quick-release mechanism with safety lock to prevent accidental opening . The closure is done by pressing and releasing the button opening .
Never before has it been so nice sharpen your knife! Not only does the new FlipStone is fun to hold and handle, but these stones for sharpening ceramic and diamond are able to create an incredible on any kind of knife sharpening .
The side of the diamond has a treatment TAN ( Alumina Titanium Nitride ) while the ceramic side is made from synthetic sapphires . Both materials are extremely durable and long lasting and come in 8 and 10 hardness on the Mohs scale ; both are able to remain perfect and long lasting , so as to ensure the best possible result , also of special steels or sintered with extremely high hardness .
The stones are joined together using special adhesives 3M and can not be separated in any way . They can be used dry or with a little water and soap or acuqa to keep the surfaces clean. If at first glance there may appear to be excessively rough , do not worry gradually become smooth with use and will improve more and more as the years to come.
Stone Size : 25x65 mm .
Open length : 165 mm.
Closed length : 98 mm .
Handle: Zytel
Accompanied by spacers, spring replacement and a handy wrench to unscrew the handles . Weights and dimensions, ideal to take with you on a trip if for quick but effective sharpening .
Quality level : HighF-FS3 -
CRKT - Chanceinhell by Ken Onion - K910KKP - Machete
Destinazione d'uso: Escursionismo/Heavy Duty
Tipo di Produzione: industriale
Lama: in acciaio al carbonio 65Mn a 54/56 HRC con trattamento Black Powder
Produzione Lama Cina
Manicatura: Polimeri TPR e Nylon
Lunghezza lama: 304mm.
Spessore della lama: 2.5mm.
Lunghezza totale: 450mm.
Bilanciatura: avanzata
Peso: 490g.
Chiusura: -
Clip: -
Fodero: in Nylon
Confezione: scatola di cartone con loghi CRKT
Note: Design by Ken OnionCK910KKP -
Fallkniven - DC521 - Whetstone to Diamond and Ceramic
Sharpening stone benches, with side diamond medium-grained and fine-grained ceramic side.
Dimensions of 55mm in width, 210mm in length and 6mm in thickness
Great for sharpening knives and kitchen knives sports a high level: the diamond allows a quick sharpening, suitable for everyday use on sports knives and hiking, while the ceramic allows you to work slowly ensuring a finish more accurate, especially on kitchen knives.
F-DC521 -
CRKT - M16-04Z by Kit Carson - knife
Intended use: Sport
Type of production: Industrial
Production Blade: Taiwan
Blade: AUS-8 stainless steel
Treatment Lama: -
Handle: Zytel
Blade length: 94mm.
Blade thickness: 3.5mm.
Closed Length: 134mm.
Total length: 230mm.
Thick when closed: 17mm.
Balance: -
Weight: 182g.
Lock: Liner Lock locking system with self-LAWKS
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: -CM16-04Z -
CRKT - Carson M16-14SFG - Special Forces Big Dog G10 knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr14MoV to 58-60 HRC
Blade treatment: Ti-Ni
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 135mm.
Total length: 235mm.
Thick when closed: 17mm.
Balancing: -
Weight: 180g.
Closure: Liner Lock with auto-LAWKS locking system
Clip: stainless steel
Sheath: -
Packaging: cardboard box with CRKT logos
Note: -CM16-14SFG -
CRKT - Folts Minimalist Bowie - 2387 - Coltello
Destinazione d'uso: Neck Knife
Tipo di produzione: Industriale
Produzione Lama: China
Lama: in acciaio inox 5Cr15MoV 55/57HRC
Trattamento Lama: -
Manicatura: Micarta
Lunghezza lama: 54mm.
Spessore lama: 2.7mm.
Lunghezza chiuso: -
Lunghezza totale: 130mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 45g.
Chiusura: -
Clip: -
Fodero: Nylon
Confezione: Scatola di cartone con loghi CRKT
Note: Design dy Alan FoltsC2387