Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.

This knife is dedicated to Camembert and is sold in the round wooden box typical of this famous cheese known throughout the world.

Intended use: Regional/Collection

Type of production: artisanal
Blade: Stainless steel 12C27
Country of production: France
Handle: Pistachio wood
Blade length: 80mm.
Blade thickness: 2.6mm.
Length closed: 110mm.
Total length: 193mm.
Weight: 88g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: wooden box

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased - year of production 2004 - 1st series Shrapnel with double guard branch and kydex sheath
* Conditions: Like new
* Commercially available Yes
* Sharpening: Original
* Marks on blade: NO
* Signs on handle: NO
* Packaging: NO
* Sheath: In kydex
* Manuals, Certificates and Guarantees: YES
* Checked and Certified by our internal laboratory

Intended Use: Military/Tactical

Type of production: industrial
Blade production: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: MIL-C 13924 bluing
Handle: Forprene
Blade length: 110mm.
Blade thickness: 6.3mm.
Closed length: 142mm.
Total length: 210mm.
Weight: 210g.
Clips: absent
Sheath: ABS sheath with Tek-Lok attachment with automatic knife retention system.
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased - Limited Edition supplied by Extrema Ratio for Task Force 45 (TF-45) joint military unit of Italian special forces, operating in Afghanistan from at least June 2006 to 2016, as part of Operation "Sarissa" of the International Security Assistance Force (ISAF).
* Conditions: Like new
* Commercially available No in the version with engraving -
* Sharpening: Original
* Marks on blade: NO
* Signs on handle: NO
* Packaging: YES
* Sheath: -
* Manuals, Certificates and Guarantees: YES
* Checked and Certified by our internal laboratory

Intended use: Sport / Tactical

Type of production: Industrial
Blade production: Italy
Blade: N690Co 58HRC stainless steel
Blade treatment: Testudo
Handle: Anticorodal
Blade length: 125mm.
Blade thickness: 3mm.
Closed length: 150mm.
Total length: 270mm.
Closed thickness: 17mm.
Balancing: -
Weight: 120g.
Closure: Liner Lock
Clip: removable in stainless steel
Scabbard: -
Packaging: cardboard box with Extrema Ratio logos
Note: -

The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.

This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.

The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration. 

The back spring (with the Maltese cross symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme. 

Intended use: Regional/Collection

Type of production: artisanal
Blade: Stainless steel 12C27
Blade production: France
Handle: Blond cow horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -

The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.

This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means that it was made entirely by hand in Laguiole by a master blacksmith in accordance with the strict quality criteria and LOG production specifications. Depending on the version, it requires between 109 and 216 work steps.

The handle is stabilised by two solid steel hilt bolsters. The left handle bears the traditional shepherd's cross (croix du berger) as decoration. 

The back spring (with the Pilgrim's shell symbol) was forged from a single piece and decorated by hand. The decoration is the unique 'signature' of the master smith, registered with the Prefecture of Puy-de-Dôme. 

The blade uses 67-layer Japanese VG10 rolled steel, manufactured by Takefu Steel.

Intended use: Regional/Collection

Type of production: artisanal
Blade: Damascus and Japanese VG10 rolled steel
Blade production: France
Handle: Blond Cowhorn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: -

A handmade Laguiole en Aubrac knife made by a master craftsman from the region of origin of Laguiole. Extremely precise in its manufacture, it is decorated with the shepherd's cross on the handle. This cross allowed those who left during the long months of the transhumance to say their prayers once the knife was stuck in the bread.

Destination: French regional collector's knife

Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 68 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: Absent

THE BRAND
Exclusive collaboration between Coltelleria Collini and Extrema Ratio marketed under the brand KNIVES.IT. 

TECHNICAL DATA SHEET
Intended Use: Collection / Tactical / Neck knife
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade finish: Black PVD cat. MIL-C-13924
Handle: Stainless steel N690Co 58/60HRC
Blade length: 40mm.
Blade thickness: 5.5mm.
Total lenght: 166mm.
Weight: 86g.
Sheath: optional (available separately) in Kydex, handcrafted by the Italian Knife Maker Simone Tonolli.
Package: cardboard box with Extrema Ratio logos
Notes: knife created and manufactured by Extrema Ratio - each knife is numbered - Design by LoTactical

HISTORY
The Tengu takes its name from a mythical creature of Japanese folklore that is represented with both human and raven features, they had the reputation of being great warriors and legends say that some founders of martial arts were trained by them.

- It is designed to be used in many different grips, but is especially effective in the reverse grip.
- Designed to be carried in a variety of ways, whether as a neck knife, under shirt, clipped in a pocket or around the waist using optional systems such as Ulti-Clip or Tek-Lok or various M.O.L.L.E. type attachments.
- With its thickness of 5.5 mm. is extremely robust and thanks to the shape of the handle is comfortable even by those with large hands or those who want to use it with tactical gloves.
- The blade is compact, robust and very functional for both precision cutting and hard materials thanks to the serrated part on the back. The tanto-shaped tip is very robust and optimal for engraving work.

ERMES is the commemorative knife developed in collaboration with the Special Operations Helicopter Regiment (R.E.O.S.) which is part of the Army Aviation Command.

The R.E.O.S. is the operational unit of helicopters in support of special forces composed of personnel specifically trained and equipped to support military activities in any operational context.

The stylized guards of the knife represent the wings present in the heraldic coat of arms of the unit. The steel used is the reliable Bölher N690Co heat treated to 58 HRC. Fiber Reinforced Nylon (FRN) polyamide polymer was chosen for the handle. The hybrid Kydex and fabric sheath is equipped with belt or harness attachment with MOLLE interface system.

It is available in two versions:
"ERMES SATIN ORDINANZA" with satin finish blade and ABS case.
"ERMES BLACK OPERATIVO", with the burnished blade.

Intended use: Collection / Tactical

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 140mm.
Blade thickness: 6.3mm.
Total length: 256mm.
Weight: 229g.
Sheath: Kydex and Fabric with MOLLE type hooking system.
Package: Commemorative case in ABS with the logos of the department
Notes: Commemorative knife developed in collaboration with the Regiment Helicopters for Special Operations (R.E.O.S.)

The particular situation created in the early years of the 1914/18 war, now mired in increasingly complex and protected trenches and fortifications, favored the formation of men who, little by little, specialized in the coup.

Our assault units, the Arditi, had their dagger. It was obtained from the pieces cut away by the long blades of the Vetterli 1870 bayonets, which in the narrow trenches, in the corridors, between the reticulars were only an obstacle. It was certainly a rustic weapon, of recovery, not too beautiful but certainly inexpensive, light, not cumbersome and in expert hands also effective.

Today, on the occasion of the centenary, we recall this important page of Italian military history with a limited celebratory series in only 100 numbered copies. This version has a satin blade and a walnut wood handle and is sold with a wooden box and leather sheath.

Intended use: Tactical / Military / Collection

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Satin
Handle: Walnut wood
Blade length: 167mm.
Blade thickness: 6.3mm.
Total length: 270mm.
Weight: 224g.
Sheath: leather thigh-strap
Packaging: wooden box
Notes: Limited edition in 100 numbered copies - Edition to celebrate the hundred years of the Italian Arditi

Intended Use: Regional / Collection

Type of production: Hand
Blade: laminated damask steel and VG10 Japanese
Production Country: France
Handle: wood ash
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Weight: 104g.
Closure: retaining spring
Clip: absent
Sheath: absent
Notes: -

Laguiole en Aubrac - Centre of Horn spring engraved with the Maltese Cross with blade sanmai - knife

Intended Use: Regional / Collection

Type of production: crafts
Blade: rolled steel damask and Japanese VG10
Production Lama France
Handle: Horn Cattle Blonde
Blade length: 100mm.
Blade Thickness: 3mm.
Length closed: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 104g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -

Direttamente derivato da specifiche militari, questo chiudibile è stato sviluppato per sostituire nell'impiego un lama fissa.

Per raggiungere questo risultato sono stati impiegati materiali robustissimi, alti spessori ed un sistema di apertura/chiusura solido e sicuro come il back lock.

Il coltello dotato di sicura manuale che conferisce massima sicurezza nell'impiego e riduce in maniera drastica il rischio di chiusure accidentali.
La sicura, se inserita in chiusura, evita agli operatori militari o di polizia che nel caso di sottrazione il coltello possa essere rivolto contro di loro.

Materiali e lavorazioni:
Tutte le parti del coltello sono ricavate dal pieno da macchine a controllo numerico ad alta precisione mentre l'assemblaggio, l'aggiustaggio e l'affilatura sono condotte artigianalmente.
La lama in acciaio inossidabile al cobalto N690, un acciaio dalle elevatissime caratteristiche di resistenza alle sollecitazioni meccaniche, capacit di taglio, tenuta del filo e resistenza alla corrosione. L'arrotatura piana e la durezza di 58HRC.
Le guancette dell'impugnatura sono in Anticorodal, una lega di alluminio con elevate doti di resistenza alle sollecitazioni meccaniche ed all'ossidazione.
Il codolo, in N690 temprato, un efficace frangi cristalli d'emergenza. Tutta la viteria, i perni e la clip sono in acciaio inox brunito. La lama, la leva ed il codolo sono ricoperti con trattamento Testudo, molto resistente all'abrasione ed all'ossidazione. Le guancette sono anodizzate nere.

Modello: M.P.C.
Destinazione: Impiego generale
Lung. Totale: 260 mm
Lama: 115 mm
Peso: 245 gr
Spess. Lama: 6 mm
Mat. Lama: Acciaio inox al cobalto N690
Impugnatura: Anticorodal

Destination: Coltello multiuso di emergenza e sopravvivenza
Blades: Acciaio inox N690Co a 58 HRC
Handle: Alluminio aeronautico anodizzato anticorodal
Total Length: 260 mm.
Blade Length: 118 mm.
Blade Tickness: 4 mm.
Locking Type: liner lock
Clip: amovibile in acciaio
Weight: 330 g.
Notes: luce led - lama emergenza (lungh. 8 cm)  - sega per legno (lungh. 11,5 cm) con terminale a gancio affilato - frangivetro - punte cacciavite

COLTELLO RITIRATO DA COLLEZIONE PRIVATA
* Tipologia: Precedentemente Acquistato
* Condizioni: in condizioni pari al nuovo
* Reperibile in commercio Fuori produzione dal 2020
* Affilatura: Di fabbrica
* Segni su lama: no
* Segni su impugnatura: no
* Scatola: Presente
* Fodero: Presente - Originale
* Manuali, Certificati e Garanzie: Certificato 
* Controllato e Certificato dal nostro laboratorio interno

La serie Task stata studiata per tutti i lavori di taglio di uso quotidiano.

La lama parzialmente simmetrica con arrotatura piana su entrambi i lati. La parte incavata della lama dopo la guardia, che separa la parte affilata dal manico, stata realizzata per alloggio del dito indice durante l'utilizzo, creando un punto di grip vicino alla parte affilata per un miglior controllo durante l'utilizzo del coltello.

Questa caratteristica, insieme al grip d'appoggio sul dorso del coltello, permette una miglior presa evitando al contempo lo scivolamento della mano sulla lama. In questo modo possibile effettuare la maggior parte dei lavori di taglio con una pressione superiore.

Destinazione d'uso: Tattico/Sportivo

Tipo di produzione: Industriali

Produzione Lama: Italia

Lama: in acciaio inox N690Co

Trattamento Lama: Testudo

Manicatura: Forprene

Lunghezza lama: 160mm.

Spessore lama: 6.3mm.

Lunghezza chiuso:

Lunghezza totale: 290mm.

Spessore da chiuso:

Bilanciatura:

Peso: 275g.

Chiusura:

Clip: Fodero: Cordura

Confezione: Scatola di cartone con loghi Extrema Ratio

Note: -

Laguiole en Aubrac - buffalo horn insignia with hammer and blade sanmai - knife collection

Type of production: crafts
Blade: rolled steel damask and Japanese VG10
Production Lama France
Handle: buffalo horn with insignia hammered
Blade length: 100mm.
Blade Thickness: 3mm.
Length closed: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 106g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -

Laguiole en Aubrac - Deer with blade sanmai - knife

Type of production: crafts
Blade: rolled steel damask and Japanese VG10
Production Lama France
Handle: deer
Blade length: 100mm.
Blade Thickness: 3mm.
Length closed: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 90g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -