Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Kasumi Japan - Sharpening stone - Grain 240/1000 - 80001 - knives accessories
The Kasumi 80001 combination whetstone with rough (240) and medium (1000) grit.
If your knife edge is in poor condition, start sharpening with the rough # 240 grit of the whetstone.
If your knife is in average condition, start with the # 1000 medium grit of the whetstone.
These two grits will keep your knives sharp enough for normal home use.
The whetstone comes with a hard rubber base for use when sharpening.
There is also a small abrasive stone to be used to grind the surface of the stone.
Dimensions:
length 175 x width 60 x height 25 mm - Weight: 635g.
Quality level: very highKJ80001 -
TB Outdoor - Le Bivouac multi tool black - 11060092 - coltello
Pratico e compatto, il coltello chiudibile Picnic Bivouac è realizzato a Thiers dalla Tarrerias-Bonjean. È un alleato essenziale per le tue uscite outdoor, la sua lama in acciaio inossidabile temprato è efficace a tavola così come per molte altre applicazioni.
Intramontabile, pratico e straordinariamente efficiente, questo coltello chiudibile Made in France è molto maneggevole grazie al suo manico ergonomico in ABS. Questo coltello pieghevole viene fornito con una custodia protettiva. Ottimi per picnic di successo o un soggiorno all'aria aperta senza problemi!
Progettato dai team di ricerca e sviluppo TB, Le Bivouac è lo strumento necessario per affrontare qualsiasi situazione: tagliare cibo, pane, filo metallico, cartone, imballaggi, ecc.
Un coltello multifunzione
- lama bloccata in posizione aperta con sistema a pompa
- Apri bottiglia
- Cavatappi
- Forchetta e cucchiaio
- Scatole aperteI punti di forza del coltello chiudibile Picnic
- Acciaio inossidabile anticorrosione
- Impugnatura in ABS antiurto
- Multifunzione
- Fatto in FranciaDestinazione d'uso: sportivo
Lama: in acciaio inox
Manicatura: in ABS
Lunghezza lama: 90mm.
Spessore della lama: 2mm.
Lunghezza totale: 140mm.
Peso: 82g.
Fodero: in cordura
Note:11060092 -
TB Outdoor - Le Bivouac multi tool green - 11060056 - knife
Practical and compact, the Picnic Bivouac folding knife is made in Thiers by Tarrerias-Bonjean. It is an essential ally for your outdoor outings, its hardened stainless steel blade is effective at the table as well as for many other applications.
Timeless, practical and extraordinarily efficient, this Made in France folding knife is very handy thanks to its ergonomic handle in ABS. This folding knife comes with a protective case. Great for successful picnics or a hassle-free stay outdoors!
Designed by TB R&D teams, Le Bivouac is the tool you need to tackle any situation: cutting food, bread, wire, cardboard, packaging, etc.
A multifunctional knife
- blade locked in open position with pump system
- Open bottle
- Corkscrew
- Fork and spoon
- Open boxesThe strengths of the Picnic folding knife
- Corrosion-resistant stainless steel
- Shockproof ABS handle
- Multifunction
- Made in FranceIntended use: sports
Blade: stainless steel
Handle: in ABS
Blade length: 90mm.
Blade thickness: 2mm.
Total length: 140mm.
Weight: 82g.
Sheath: in cordura
Note:11060056 -
TB Outdoor - Maraudeur tactical knife in G10 Black - 11060035 - knife
This survival knife was designed by the French Tarrerias-Bonjean in collaboration with the military expert Philippe PEROTTI.
Manufactured in the workshops in Thiers, this survival knife features a MOX ® stainless steel blade. The black PVD coating offers very high wear and corrosion resistance.
Paracord 550 handle ensures a soft, comfortable, but safe grip in all conditions.
Glass shatter on the heel of the knife.Intended use: collection
Blade: MOX ® 58/59 hrc stainless steel
Handle: in G10
Blade length: 113mm.
Blade thickness: 4mm.
Total length: 246mm.
Weight: 214g.
Sheath: in kydex
Notes: Philippe Perotti design11060035 -
Brusletto - Vassfaret F/150 - Signature Edition - 19932 - knife
Intended use: Hunting / sports / collection
Type of production: semi-industrial
Production Blade: Norway
Blade: 440C stainless steel
Treatment Blade: mirror polishing
Handle: Micarta
Blade length: 90mm.
Blade Thickness: 3.5mm.
Length closed: -
Overall length: 210mm.
Balancing: back
Weight: 238g.
Sheath: Black leather
Note: version with blade autographed by Ken Where Nyhus, CEO of Brusletto & Co. AS10970€143.44Only 2 left -
Rockstead - HIGO II X-FCF - ZDP-189 & Dark Matter Gold Carbon Fiber - folding knife
Higo is one of the most beloved models for Rockstead Knives fans around the world, and HIGOⅡX, with a custom Dark Matter Gold (DMG) carbon fiber coating and a titanium back layer, is one more step in the pursuit of perfection. The blade is made of ZDP189 super stainless steel and features a unique convexity with gradually reduced angle (30 degrees at the middle and 24 degrees at the tip). The variable blade angle is the result of Rockstead's long quest for superior sharpness and cutting ability.
Blade: ZDP-189 stainless steel at 66.7HRC
Handle: anodized titanium and Dark Matter Gold carbon fiber
Blade length: 89mm.
Blade thickness: 3.2mm.
Total length: 216mm.
Weight: 138g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Accompanied by warranty certificate with full technical specificationsRO-HIGIIX-ZDPDMG -
Rockstead - Shin - Clad ZDP189 & Aluminum and Samekawa - folding knife
With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.
Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.
Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
Blade length: 95 mm.
Blade thickness: 4 mm.
Overall length: 210 mm.
Weight: 145 g.
Lock: Liner Lock steel in 52HRC 402J2
Clip: Steel 402J2 to 52HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.RO-SHIN-ZDP -
Rockstead - Hizen - DLC YXR7 & Duralumin - Folding Knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: in Hitachi YXR7 steel at 64HRC
Blade treatment: Black DLC mirror
Handle: A7075 Duralumin with Hv400 hardness anodizing
Blade length: 70mm.
Blade thickness: 3.3mm.
Length closed: 104mm.
Total length: 176mm.
Thick when closed: 11.4mm.
Weight: 74g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel of 1mm. with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: -RO-HIZ-DLC -
Rockstead - Hizen - ZDP-189 & Duralumin - Folding Knife made in Japan
Blade: stainless steel ZDP-189 to 67.2HRC
Handle: Duralumin A2024 with anodized surface to HV400
Blade length: 73 mm.
Blade Thickness: 3.5 mm.
Overall length: 176 mm.
Weight: 172 g.
Lock: Frame Lock with a swing in SKD11 61HRC
Clip: Steel 402J2 to 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.RO-HIZ-ZDP189 -
Rockstead - 2010 Higo-MH-DLC Serial #303 - YXR7 HPC & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory
The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.
Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HIMHDLC-CP -
Rockstead - 2010 Higo-ST Serial #005 - YR7 HPC & Duralumin - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.
The best industrial knives currently in production are marketed under the Rockstead brand. Created by Katsumi Kitano, who has been making quality knives for more than 20 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in the level of innovation for the materials used and construction techniques.
Country of production: Japan
Type of production: midtech
Blade: Hitachi YXR7 steel at 64.8HRC with 3micron HPC coverage and hardness of Hv1800
Handle: Duralumin A2024 with surface anodizing and hardness of Hv400
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 130g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Serial number 005 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HISTHPC-CP -
Rockstead - CHI ZDP - Shinogi Zukuri Clad Steel SanMai ZDP189 - knife made in Japan
Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.
Intended Use: Collection/Sportsman
Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpeningR-CHIZDP -
TB Outdoor - C.A.C. GIGN knife - Limited Edition - French Army - 11060099 - tactical multipurpose knife
THE CAC® GIGN - Limited Edition 250 ex.
The Intervention Groupe de la Gendarmerie Nationale (GIGN) is an elite unit of the French National Gendarmerie specializing in counter-terrorism actions, in the freeing of hostages and in special operations.
LE CAC® officially chosen by the French Army
This knife is a true concentrate of all the advanced technologies that one would expect from an operational knife. The blade is in Nitrox®, with a PA6 handle
The version of the C.A.C currently supplied to the army, with the official logo on the blade and coyote handle is not available for sale to the civilian.
The CAC ® is the third knife produced by Tarrerias - Bonjean designed for the French army. Its uncompromising design, lightness and strength make the CAC® an exceptional knife. Much more technical and ambitious than its predecessors, the CAC® is TB's response to the request expressed by the French army, namely to design a sturdy and ambidextrous knife with one-handed opening and closing. To create this exceptional knife, Tarrerias - Bonjean collaborated with Philippe Perotti, a former member of the French special forces and author of dozens of books on shooting. Its proven track record in hand-to-hand combat has maximized the efficiency of knife use to make the CAC® the ideal companion for French troops in all operational theaters. The locking mechanism of the CAC® is extremely robust and guarantees perfect locking of the blade in the open position.
TB has also integrated the safe blade locking mechanism by moving the axis on the CAC®. This mechanism is extremely robust and guarantees perfect locking of the blade in the open position.
The CAC® was officially selected in 2017 by the French army, compared to the competitors' offer, for its performance and value for money. Its distribution in the various corps began at the beginning of 2018 and will largely equip our French at least until 2022.
Perfectly resistant to corrosion, the blade is made of Nitrox®. The CAC® also has a glass breaker, a belt cutter and a reversible belt clip.
The handle is composed of two polymer plates loaded with glass fibers. These plates are screwed to the mechanism by means of stainless steel screws, one of which cleverly houses a strap cutter blade. This interchangeable, curved blade is designed to cut through straps, ropes and seat belts for easy extraction in the event of an accident.
Intended use: collection
Blade: stainless steel Nitrox® 58/59 hrc
Handle: in PA6 FV
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 238mm.
Weight: 195g.
Sheath: -
Notes: Philippe Perotti design11060099 -
TB Outdoor - C.A.C. knife Desert - French Army - 11060105 - tactical multipurpose knife
LE CAC® officially chosen by the French Army
This knife is a true concentrate of all the advanced technologies that one would expect from an operational knife. The blade is in Nitrox®, with a PA6 handle
The version of the C.A.C currently supplied to the army, with the official logo on the blade and coyote handle is not available for sale to the civilian.
The CAC ® is the third knife produced by Tarrerias - Bonjean designed for the French army. Its uncompromising design, lightness and strength make the CAC® an exceptional knife. Much more technical and ambitious than its predecessors, the CAC® is TB's response to the request expressed by the French army, namely to design a sturdy and ambidextrous knife with one-handed opening and closing. To create this exceptional knife, Tarrerias - Bonjean collaborated with Philippe Perotti, a former member of the French special forces and author of dozens of books on shooting. Its proven track record in hand-to-hand combat has maximized the efficiency of knife use to make the CAC® the ideal companion for French troops in all operational theaters. The locking mechanism of the CAC® is extremely robust and guarantees perfect locking of the blade in the open position.
TB has also integrated the safe blade locking mechanism by moving the axis on the CAC®. This mechanism is extremely robust and guarantees perfect locking of the blade in the open position.
The CAC® was officially selected in 2017 by the French army, compared to the competitors' offer, for its performance and value for money. Its distribution in the various corps began at the beginning of 2018 and will largely equip our French at least until 2022.
Perfectly resistant to corrosion, the blade is made of Nitrox®. The CAC® also has a glass breaker, a belt cutter and a reversible belt clip.
The handle is composed of two polymer plates loaded with glass fibers. These plates are screwed to the mechanism by means of stainless steel screws, one of which cleverly houses a strap cutter blade. This interchangeable, curved blade is designed to cut through straps, ropes and seat belts for easy extraction in the event of an accident.
Intended use: collection
Blade: stainless steel Nitrox® 58/59 hrc
Handle: in PA6 FV
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 238mm.
Weight: 195g.
Sheath: -
Notes: Philippe Perotti design11060105 -
Kasumi Japan - Sharpening stone - Grain 3000/8000 - 80002 - knives accessories
Kasumi 80002 combination sharpening stone with fine (3000) and superfine (8000) grit. Excellent for giving your knives a razor sharpening.
The # 8000 grit was developed specifically for knives and knives made of special steels.
# 8000 grit is nearly the same grain and quality as a natural whetstone used to sharpen Japanese samurai swords.
With the right technique and experience, the # 3000 / # 8000 whetstone combination will give your knives a beautiful mirror edge, just like the edge of a samurai sword.
The whetstone comes with a hard rubber base for use when sharpening.
There is also a small abrasive stone to be used to grind the surface of the stone.
Dimensions:
length 175 x width 60 x height 25 mm - Weight: 635g.
Quality level: very highKJ80002 -
TB Outdoor - C.A.C. knife G10 Red - Esercito Francese - 11060046 - coltello multiuso tattico
LE CAC® scelto ufficialmente dell'Esercito Francese
Questo coltello è un vero concentrato di tutte le tecnologie avanzate che ci si aspetterebbe da un coltello operativo. La lama è in Nitrox®, con manicatura in PA6
La versione del C.A.C attualmente in dotazione all'esercito, con logo ufficiale sulla lama e impugnatura in coyote non è disponibile per la vendita al civile.
Il CAC ® è il terzo coltello prdotto dalla Tarrerias - Bonjean progettato per l'esercito francese. Il suo design senza compromessi, leggerezza e robustezza fanno del CAC® un coltello eccezionale. Molto più tecnico e ambizioso dei suoi predecessori, il CAC® è la risposta di TB alla richiesta espressa dall'esercito francese, ovvero quella di progettare un coltello robusto e ambidestro con apertura e chiusura con una sola mano. Per creare questo eccezionale coltello, Tarrerias - Bonjean ha collaborato con Philippe Perotti, ex appartenente alle forze speciali francesi e autore di decine di libri sul tiro. La sua comprovata esperienza nel combattimento corpo a corpo ha massimizzato l'efficienza dell'uso del coltello per rendere il CAC® il compagno ideale per le truppe francesi in tutti i teatri operativi. Il meccanismo di bloccaggio del CAC® è estremamente robusto e garantisce un perfetto bloccaggio della lama in posizione aperta.
TB ha anche integrato il meccanismo di bloccaggio sicuro della lama spostando l'asse sul CAC®. Questo meccanismo è estremamente robusto e garantisce un perfetto bloccaggio della lama in posizione aperta.
Il CAC® è stato ufficialmente selezionato nel 2017 dall'esercito francese, rispetto all'offerta dei competitor, per le sue prestazioni, e rapporto qualità prezzo. La sua distribuzione nei vari corpi d'armata è iniziata all'inizio del 2018 e equipaggerà in gran parte i nostri francesi almeno fino al 2022.
Perfettamente resistente alla corrosione, la lama è realizzata in Nitrox®. Il CAC® ha anche un rompivetro, un taglia cinture e una clip da cintura reversibile.
Il manico è composto da due piastre in polimero caricato con fibre di vetro. Queste piastre sono avvitate al meccanismo tramite viti in acciaio inossidabile, una delle quali ospita abilmente una lama taglia reggetta. Questa lama curva e intercambiabile è progettata per tagliare cinghie, corde e cinture di sicurezza per facilitare l'estrazione in caso di incidente.
Destinazione d'uso: collezione
Lama: in acciaio inox Nitrox® 58/59 hrc
Manicatura: in G10
Lunghezza lama: 85mm.
Spessore della lama: 3mm.
Lunghezza totale: 238mm.
Peso: 161g.
Fodero: -
Note: design Philippe Perotti11060046 -
TB Outdoor - C.A.C. knife black - French Army - 11060052 - tactical multipurpose knife
LE CAC® officially chosen by the French Army
This knife is a true concentrate of all the advanced technologies that one would expect from an operational knife. The blade is in Nitrox®, with a PA6 handle
The version of the C.A.C currently supplied to the army, with the official logo on the blade and coyote handle is not available for sale to the civilian.
The CAC ® is the third knife produced by Tarrerias - Bonjean designed for the French army. Its uncompromising design, lightness and strength make the CAC® an exceptional knife. Much more technical and ambitious than its predecessors, the CAC® is TB's response to the request expressed by the French army, namely to design a sturdy and ambidextrous knife with one-handed opening and closing. To create this exceptional knife, Tarrerias - Bonjean collaborated with Philippe Perotti, a former member of the French special forces and author of dozens of books on shooting. Its proven track record in hand-to-hand combat has maximized the efficiency of knife use to make the CAC® the ideal companion for French troops in all operational theaters. The locking mechanism of the CAC® is extremely robust and guarantees perfect locking of the blade in the open position.
TB has also integrated the safe blade locking mechanism by moving the axis on the CAC®. This mechanism is extremely robust and guarantees perfect locking of the blade in the open position.
The CAC® was officially selected in 2017 by the French army, compared to the competitors' offer, for its performance and value for money. Its distribution in the various corps began at the beginning of 2018 and will largely equip our French at least until 2022.
Perfectly resistant to corrosion, the blade is made of Nitrox®. The CAC® also has a glass breaker, a belt cutter and a reversible belt clip.
The handle is composed of two polymer plates loaded with glass fibers. These plates are screwed to the mechanism by means of stainless steel screws, one of which cleverly houses a strap cutter blade. This interchangeable, curved blade is designed to cut through straps, ropes and seat belts for easy extraction in the event of an accident.
Intended use: collection
Blade: stainless steel Nitrox® 58/59 hrc
Handle: in PA6 FV
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 238mm.
Weight: 195g.
Sheath: -
Notes: Philippe Perotti design11060052 -
TB Outdoor - C.A.C. fixed training - 10590008 - training knife
Equipped with a balance in all respects identical to that of the C.A.C® folding knife, this training knife with a fixed blade does not cut and has a round tip. No accidental injury is possible. The blade is however made of hardened stainless steel so that it can be used in all circumstances.
Intended use: training
Blade: stainless steel
Handle: in ABS
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 230mm.
Weight: 158g.
Sheath: -
Notes: Philippe Perotti design10590008 -
TB Outdoor - C.A.C. knife Kaki - French Army - 11060053 - tactical multipurpose knife
LE CAC® officially chosen by the French Army
This knife is a true concentrate of all the advanced technologies that one would expect from an operational knife. The blade is in Nitrox®, with a PA6 handle
The version of the C.A.C currently supplied to the army, with the official logo on the blade and coyote handle is not available for sale to the civilian.
The CAC ® is the third knife produced by Tarrerias - Bonjean designed for the French army. Its uncompromising design, lightness and strength make the CAC® an exceptional knife. Much more technical and ambitious than its predecessors, the CAC® is TB's response to the request expressed by the French army, namely to design a sturdy and ambidextrous knife with one-handed opening and closing. To create this exceptional knife, Tarrerias - Bonjean collaborated with Philippe Perotti, a former member of the French special forces and author of dozens of books on shooting. Its proven track record in hand-to-hand combat has maximized the efficiency of knife use to make the CAC® the ideal companion for French troops in all operational theaters. The locking mechanism of the CAC® is extremely robust and guarantees perfect locking of the blade in the open position.
TB has also integrated the safe blade locking mechanism by moving the axis on the CAC®. This mechanism is extremely robust and guarantees perfect locking of the blade in the open position.
The CAC® was officially selected in 2017 by the French army, compared to the competitors' offer, for its performance and value for money. Its distribution in the various corps began at the beginning of 2018 and will largely equip our French at least until 2022.
Perfectly resistant to corrosion, the blade is made of Nitrox®. The CAC® also has a glass breaker, a belt cutter and a reversible belt clip.
The handle is composed of two polymer plates loaded with glass fibers. These plates are screwed to the mechanism by means of stainless steel screws, one of which cleverly houses a strap cutter blade. This interchangeable, curved blade is designed to cut through straps, ropes and seat belts for easy extraction in the event of an accident.
Intended use: collection
Blade: stainless steel Nitrox® 58/59 hrc
Handle: in PA6 FV
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 238mm.
Weight: 195g.
Sheath: -
Notes: Philippe Perotti design11060053 -
TB Outdoor - Maraudeur tactical knife in G10 Green - 11060037 - knife
This survival knife was designed by the French Tarrerias-Bonjean in collaboration with the military expert Philippe PEROTTI.
Manufactured in the workshops in Thiers, this survival knife features a MOX ® stainless steel blade. The black PVD coating offers very high wear and corrosion resistance.
Paracord 550 handle ensures a soft, comfortable, but safe grip in all conditions.
Glass shatter on the heel of the knife.Intended use: collection
Blade: MOX ® 58/59 hrc stainless steel
Handle: in G10
Blade length: 113mm.
Blade thickness: 4mm.
Total length: 246mm.
Weight: 214g.
Sheath: in kydex
Notes: Philippe Perotti design11060037 -
TB Outdoor - Maraudeur tactical knife in desert - 11060004 - knife
This survival knife was designed by the French Tarrerias-Bonjean in collaboration with the military expert Philippe PEROTTI.
Manufactured in the workshops in Thiers, this survival knife features a MOX ® stainless steel blade. The black PVD coating offers very high wear and corrosion resistance.
Paracord 550 handle ensures a soft, comfortable, but safe grip in all conditions.
Glass shatter on the heel of the knife.Intended use: collection
Blade: MOX ® 58/59 hrc stainless steel
Handle: in paracord
Blade length: 113mm.
Blade thickness: 4mm.
Total length: 246mm.
Weight: 200g.
Sheath: in kydex
Notes: Philippe Perotti design11060004 -
Rockstead - Higo II F-HTI-ZDP - Titanium ZDP-189 - knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and tightness of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.5HRC
Blade treatment: mirror polished
Handle: titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 12.2mm.
Weight: 136g.
Opening: through ambidextrous pin
Washers: in brass
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 096 - Date of production 05 July 2019HIGOIIHTIZ -
Rockstead - Shin knife DLC - YXR7 - knife
This knife blade is convex on both sides in the tradition of the highly praised Japanese sword. This shape is both sharp and strong, and can still slice cleanly through a sheet of paper even after the punishment of chopping and cutting through dried bamboo. Using this special blade shape is an excellent way of allowing an edge to be thick without sacrificing any of its sharpness. This knife is of preeminent sharpness. This is a durable knife with strong cutting capabilities that will last for a long time. Even when used for rigorous cutting, the blade will not bite or catch thanks to its convex shape. Other knives will often bite or catch, and may acquire nicks if pulled out suddenly.
Blade: XR-7 steel at 64.3 HRC with DLC treatment
Handle: Same (real breed leather) and aeronautical aluminum with Hv400 black alumite treatment
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closing: Liner Lock in 402J2 steel at 52HRC
Clip: in 402J2 steel at 52HRC
Notes: Accompanied by a warranty certificate with technical specifications.RS-SHIN-B -
Rockstead - Higo II X-CF-ZDP - Carbon Fiber ZDP-189 - knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: anodised titanium and carbon fiber
Blade length: 89mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 133g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 028 - Date of production April 23, 2019HIGOIIXCF -
Rockstead - Chou HPC - Black Silk - neck knife
With the Rockstead brand, of Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently being marketed.
Created by Katsumi Kitano, who has been producing quality knives for over 20 years, to the extent that they have been awarded the highest recognition among the artisanal cutlers in Japan, they prove to be exceptional both in cutting, penetration and thread strength and in terms of innovation for the materials used and for construction techniques.
Blade: Hitachi YXR7 65HRC steel with HPC titanium cover
Handle: interweaving in silk tied by hand
Blade length: 45 mm.
Blade thickness: 4 mm.
Total length: 120 mm.
Weight: 60 g.
Sheath: neck, in Kydex
Notes: Accompanied by silk bag and certificate of guarantee with technical specifications.4069BLACK -
Rockstead - TEI DLC - 65hrc - knife collection
This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.
Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: FolderRO-TEI -
Rockstead - Chou HPC Ironwood - Neck Knife - Knife
With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.
Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.
Use: utility / Neck KnifeProduction Country: Japan
Blade: stainless Hitachi YXR7 to 65HRC
Finish: HPC titanium
Handle: Ironwood
Blade length: 45 mm.
Blade thickness: 4 mm.
Overall length: 120 mm.
Weight: 60 g.
Sheath: neck, Kydex thermoformed
Notes: Accompanied by a certificate of guarantee with technical specifications4069IW -
Rockstead - SHUN Titanium ZDP-189 by Sinkevich - knife
Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: acciaio laminato con guance esterne in VG10 e tagliente in ZDP-189 a 66/67HRC con finitura a specchio
Manicatura: Titanio anodizzato
Lunghezza lama: 105 mm.
Spessore della lama: 3,8 mm.
Lunghezza totale: 190 mm.
Peso: 159g.
Chiusura: Frame Lock con battente in acciaio inox
Clip: Deep pocket, amovibile, in acciaio inox SUS420J2 a 50HRC
Note: Design by Sinkevich - accompagnato da certificato di garanzia con specifiche tecniche dettagliate12431 -
Rockstead - SAI Titanium ZDP-189 - knife
Rockstead - SAI Titanium ZDP-189 - knife
Blade: ZDP-189 in 66.8HRC
Handle material: titanium
Blade length: 80 mm.
Blade Thickness: 3.7 mm.
Overall length: 190 mm.
Weight: 140g.
Closure: liner lock
Sheath: Black leather
Notes: Accompanied by a certificate of guarantee with the technical specifications.SAI -
Rockstead - Higo-X-IW - Ironwood ZDP-189 - knife
Rockstead - Higo-X-IW - Ironwood ZDP-189 - knife
With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.
Blade: ZDP-189 in 66.8HRC
Handle material: stainless steel and wood SUS420J2 Ironwood
Blade length: 90 mm.
Blade Thickness: 3 mm.
Overall length: 215 mm.
Weight: 133g.
Lock: Frame Lock with swing SKD11 to 61HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.10887 -
Rockstead - Chu DLT - knife
Rockstead - Chu DLT - knife
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.
Blade: Stainless steel with 64HRC Hitachi YXR7 to cover DLT571 3micron
Handle: in green paracord
Blade length: 120mm.
Blade Thickness: 6mm.
Overall length: 2150mm.
Weight: 284g.
Balancing: 1cm back from the lower branch of the guard
Sheath: Leather
Note: Product is out of printChu002 -
Rockstead - Beetle Clad Steel - coltello
Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: Acciaio SanMai CLA189 composto da due guance esterne in ATS-34 a 61.9 HRC e da un tagliente in ZDP189 a 67.2 HRC
Manicatura: Same (vera pelle di razza) e alluminio aeronautico con trattamento black alumite a Hv400
Lunghezza lama: 80 mm.
Spessore della lama: 4 mm.
Lunghezza totale: 190 mm.
Peso: 110 g.
Chiusura: Liner Lock in acciaio 402J2 a 46HRC
Clip: in acciaio 402J2 a 45HRC
Note: Accompagnato da certificato di garanzia con specifiche tecniche.4050 -
Rockstead - Chi HPC - knife
Rockstead - About HPC - knife
With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.
Blade: stainless Hitachi YXR7 to 64.8HRC coverage HPC 3micron - Hv1800
Handle material: Duralumin A2024 with anodized surface to HV400 and skin of Breed
Blade length: 82 mm.
Blade Thickness: 4 mm.
Overall length: 189 mm.
Weight: 100 g.
Lock: Liner Lock 402J2 steel at 52HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.4067DLC -
Rockstead - Chou HPC - red silk - neck knife
With the Rockstead brand, of Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently being marketed.
Created by Katsumi Kitano, who has been producing quality knives for over 20 years, to the extent that they have been awarded the highest recognition among the artisanal cutlers in Japan, they prove to be exceptional both in cutting, penetration and thread strength and in terms of innovation for the materials used and for construction techniques.
Blade: Hitachi YXR7 65HRC steel with HPC titanium cover
Handle: interweaving in silk tied by hand
Blade length: 45 mm.
Blade thickness: 4 mm.
Total length: 120 mm.
Weight: 60 g.
Sheath: neck, in Kydex
Notes: Accompanied by silk bag and certificate of guarantee with technical specifications.4069RED -
Rockstead - Higo knife in DLC - knife
Blade: Hitachi YXR7 64.8HRC steel with 3micron HPC cover - Hv1800
Handle: Duralumin A2024 with surface anodization at Hv400
Blade length: 90 mm.
Blade thickness: 3.5 mm.
Overall length: 215 mm.
Weight: 100 g.
Closing: Frame Lock with SKD11 to 61HRC
Clip: 402J2 steel to 48HRC
Notes: Accompanied by a certificate of guarantee with technical specifications.4062 -
Rockstead - Higo-JH knife ZDP-189 - knife
Intended use: Collection / Sports
Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: aluminum
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 102g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 1039 - Date of production 31 May 20194062ZDP -
Rockstead - Hyuga DLT - coltello
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: In acciaio Hitachi YXR7 a 64HRC con copertura DLT571 3micron
Manicatura: in legno ironwood
Lunghezza lama: 95mm.
Spessore della lama: 3,1mm.
Lunghezza totale: 210mm.
Peso: 100g.
Bilanciatura: 1cm arretrato dal ramo di guardia inferiore
Fodero: in cuoio
Note: Accompagnato da certificato di garanzia.4064 -
Rockstead - Jin DLC Leather - coltello
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: full tang in acciaio Hitachi YXR7 a 65HRC con copertura HPC 3micron - Hv1800
Manicatura: in legno "iron wood"
Lunghezza lama: 130mm.
Spessore della lama: 6mm.
Lunghezza totale: 250mm.
Peso: 304g.
Bilanciatura: sul ramo di guardia inferiore
Fodero: cuoio
Note: lama asimmetrica, accompagnato da certificati tecnici e di garanzia.4065L -
Rockstead - Kou-S DLC - coltello
Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: acciaio Hitachi YXR7 a 64.7HRC con copertura DLC 3micron - Hv1800
Manicatura: Same (vera pelle di razza) e alluminio aeronautico con trattamento black alumite a Hv400
Lunghezza lama: 82 mm.
Spessore della lama: 3.5 mm.
Lunghezza totale: 182 mm.
Peso: 100 g.
Chiusura: Liner Lock in acciaio 402J2 a 52HRC
Clip: in acciaio 402J2 a 52HRC
Note: Modello numerato e accompagnato da certificato di garanzia con specifiche tecniche.4058 -
Rockstead - Kou-S ZDP-189 - coltello
Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: Acciaio inox ZDP189 a 67.1 HRC
Manicatura: Same (vera pelle di razza) e alluminio aeronautico con trattamento black alumite a Hv400
Lunghezza lama: 82 mm.
Spessore della lama: 3.5 mm.
Lunghezza totale: 182 mm.
Peso: 100 g.
Chiusura: Liner Lock in acciaio 402J2 a 52HRC
Clip: in acciaio 402J2 a 52HRC
Note: Accompagnato da certificato di garanzia con specifiche tecniche.4057 -
Rockstead - Shin-A Wind Ripple HPC Limited Edition - coltello
Con il marchio Rockstead, della Ishida Co. di Sakai in Giappone, vengono commercializzati i migliori coltelli industriali attualmente reperibili sul mercato.
Punti di forza di questi coltelli sono l'assoluta precisione delle lavorazioni a controllo numerico, l'utilizzo di acciai tecnologicamente avanzati, le elevatissime durezze delle lame che garantiscono incredibili capacità di taglio, penetrazione e tenuta del filo ed i meccanismi di apertura e chisura che sanno garantire la massima sicurezza senza rinunciare al comfort ed alla fluidità d'uso.
Lama: Acciaio al carbonio YXR-7con tagliente a 65.1 HRC e trattamento superficiale HPC
Manicatura: Alluminio aeronautico A6063S con trattamento black alumite a Hv400
Lunghezza lama: 88 mm.
Spessore della lama: 4 mm.
Lunghezza totale: 210 mm.
Peso: 154 g.
Chiusura: Liner Lock in acciaio 402J2 a 50HRC
Clip: in acciaio 402J2 a 50HRC
Note: Esemplare in edizione limitata, realizzato per lo show Arms & Hunting 2011 tenutosi dal 13 al 16 ottobre a Mosca, Russia. Accompagnato da certificato di garanzia con specifiche tecniche.4072