Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.

Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.

Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
Blade length: 95 mm.
Blade thickness: 4 mm.
Overall length: 210 mm.
Weight: 145 g.
Lock: Liner Lock steel in 52HRC 402J2
Clip: Steel 402J2 to 52HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory



The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.

Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.

Intended Use: Collection/Sportsman

Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpening

Pohl Force's Quebec series is a classic mission knife that has been at the top of founder and designer Dietmar Pohl's wish list for many decades. In 2014, Pohl Force received exclusive permission from the original manufacturer to use the basic design for its interpretation.

Developed as the Ground Forces Combat & General Purpose Weapon, the multi-purpose knife was designed for the U.S. Marine Corps in the early 1950s. Although it was never officially introduced, it clearly demonstrated its capabilities in the Vietnam War, especially in the hands of American special forces. Almost 70 years after its first design, the modern Pohl Force interpretation of this classic represents the perfect fusion of old-school classic design and modern high-tech production.

Designer Dietmar Pohl has revised the design of the Quebec One and expanded the knife's range of functions. The blade of the new Quebec Two is now made of D2 steel instead of Sleipner, which brings higher levels of carbon and chromium, thus significantly improving cut and corrosion resistance. In addition, Dietmar Pohl has once again optimized the blade of the classic. The new version now has a 10 mm longer cutting edge and a secondary edge on the back.

In addition, the Pohl Force Prepper System has been integrated into the handle of the Quebec Two to safely store survival items inside the handle. A tool to open the handle screws is included. Pohl Force's new scabbard system allows for greatly increased use. The highly elaborate sheath, made of 2.5-mm-thick Kydex, with belt adapter and leg strap, allows for high carrying comfort. To attach it to the hand, the Quebec Two is equipped with a lanyard.

Total length: 315 millimeters
Blade length: 190 millimeters
Blade thickness: 6 mm
Weight: 380g
Blade material: D2 steel
Blade finish: titanium nitriding
Handle material: G-10
Handle thickness: 24 mm
Sheath: 2.5mm thick Kydex with Cordura belt hooks, removable
Accessories included: Lanyard 

Packaging: Cardboard box, warranty certificate
Notes: Each knife is numbered and individually signed by DIetmar Pohl on the Kydex sheath

Pohl Force's Quebec series is a classic mission knife that has been at the top of founder and designer Dietmar Pohl's wish list for many decades. In 2014, Pohl Force received exclusive permission from the original manufacturer to use the basic design for its interpretation.

Developed as the Ground Forces Combat & General Purpose Weapon, the multi-purpose knife was designed for the U.S. Marine Corps in the early 1950s. Although it was never officially introduced, it clearly demonstrated its capabilities in the Vietnam War, especially in the hands of American special forces. Almost 70 years after its first design, the modern Pohl Force interpretation of this classic represents the perfect fusion of old-school classic design and modern high-tech production.

Designer Dietmar Pohl has revised the design of the Quebec One and expanded the knife's range of functions. The blade of the new Quebec Two is now made of D2 steel instead of Sleipner, which brings higher levels of carbon and chromium, thus significantly improving cut and corrosion resistance. In addition, Dietmar Pohl has once again optimized the blade of the classic. The new version now has a 10 mm longer cutting edge and a secondary edge on the back.

In addition, the Pohl Force Prepper System has been integrated into the handle of the Quebec Two to safely store survival items inside the handle. A tool to open the handle screws is included. Pohl Force's new scabbard system allows for greatly increased use. The highly elaborate sheath, made of 2.5-mm-thick Kydex, with belt adapter and leg strap, allows for high carrying comfort. To attach it to the hand, the Quebec Two is equipped with a lanyard.

Total length: 315 millimeters
Blade length: 190 millimeters
Blade thickness: 6 mm
Weight: 380g
Blade material: D2 steel
Blade finish: stonewashed
Handle material: G-10
Handle thickness: 24 mm
Sheath: 2.5mm thick Kydex with Cordura belt hooks, removable
Accessories included: Lanyard 

Packaging: Cardboard box, warranty certificate
Notes: Each knife is numbered and individually signed by DIetmar Pohl on the Kydex sheath

With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Two covers a wide range of applications.

The modern Spear Point blade and handle of the Charlie Two are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The Stonewashed finish creates a scratch-resistant surface and increases the blade's corrosion resistance.

Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip. 

The Charlie Two comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.

Intended Use: Tactical/Sporting

Blade: Full tang made of D2 steel at 59/60HRC with Stonewashed finish
Handle: -
Blade length: 95mm.
Blade thickness: 6mm.
Total length: 210mm.
Weight: 152g.
Sheath: made of kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signed

With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Two covers a wide range of applications.

The modern Spear Point blade and handle of the Charlie Two are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The surface of the handle and blade is coated with a black titanium nitriding.

Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip. 

The Charlie Two BK comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.

Intended Use: Tactical/Sporting

Blade: Full tang made of D2 steel at 59/60HRC with TiNi coating
Handle: -
Blade length: 95mm.
Blade thickness: 6mm.
Total length: 210mm.
Weight: 152g.
Sheath: kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signed

With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Three covers a wide range of applications.

The modern Spear Point blade and handle of the Charlie Three are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The surface of the handle and blade is coated with a black titanium nitriding.

Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip. 

The Charlie Three BK comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.

Intended Use: Tactical/Sporting

Blade: Full tang made of D2 steel at 59/60HRC with TiNi coating
Handle: -
Blade length: 95mm.
Blade thickness: 6mm.
Total length: 210mm.
Weight: 152g.
Sheath: kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signed

With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.

The focus is on the massive, classic Bowie blade of the Compact One, which is 88 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The surface of the blade has a tactical, non-reflective TiNi titanium nitriding coating that provides excellent protection against external corrosives.

The reduced handle design is the basis for the knife's very compact size. The pleasantly rounded tang and cleverly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.

The Compact One BK is equipped with a robust, high-quality Kydex sheath in black. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.

Intended use: Tactical / Sporting

Blade: Full tang in D2 steel at 59/60HRC with TiNi coating
Handle: In G-10
Blade length: 88mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.

Based on the well-known MK-9, designer Dietmar Pohl has developed the new Tactical Nine. Reduced in weight and more compact in size, the Tactical Nine Black is still a full-fledged knife.

The sturdy 20cm long and 6mm thick spear point blade is suitable for a wide range of applications. For high edge retention and blade resilience, the choice fell on the well-known D2 tool steel.

The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion. The step-shaped grip design offers an excellent and secure grip. For powerful or delicate work, the pronounced and also rounded finger recess in front of the guard allows the knife to lean forward. A hidden hole in the end of the handle offers the possibility to mount a lanyard (included).

The Kydex sheath of the Tactical Nine Black has a material thickness of 2.5mm which provides the basis for a well thought out and durable carrying system which fully meets the high demands placed in practice on a tactical knife. A leg strap, infinitely adjustable in size, with snap closure allows it to be fixed to the thigh of the wearer.

Intended use: Collection / Sports

Blade: Full tang in D2 steel at 59 / 60HRC
Handle: In G-10
Blade length: 200mm.
Blade thickness: 6mm.
Total length: 345mm.
Weight: 482g.
Sheath: in kydex
Packaging: 3D certified numbered patch

Based on the well-known MK-8, designer Dietmar Pohl has developed the new Tactical Eight Black. Reduced in weight and more compact in size, the Tactical Eight Black is still a knife in all respects, versatile for professional users.

The sturdy Bowie blade over 17cm long and 6mm thick is suitable for a wide range of applications. For high edge retention and blade resilience, the choice fell on the well-known D2 tool steel.

The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion. A hidden hole at the end of the grip offers the possibility to mount a lanyard (included).

The Kydex® sheath of the Tactical Eight Black with a material thickness of 2.5 millimeters provides the basis for a well thought-out and durable carrying system that fully meets the high demands placed on a tactical knife in practice.

Intended use: Collection / Sports

Blade: Full tang in D2 steel at 59 / 60HRC
Handle: In G-10
Blade length: 174mm.
Blade thickness: 6mm.
Total length: 315mm.
Weight: 375g.
Sheath: in kydex
Packaging: box with numbered certificate

Based on the well-known MK-8, designer Dietmar Pohl has developed the new Tactical Eight. Reduced in weight and more compact in size, the Tactical Eight is still a knife in all respects, versatile for professional users.

The sturdy 17.4cm long and 6mm thick Bowie blade is suitable for a wide range of applications. For high edge retention and blade resilience, the choice fell on the well-known D2 tool steel.

The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion. A hidden hole at the end of the grip offers the possibility to mount a lanyard (included).

The Kydex® sheath of the Tactical Eight with a material thickness of 2.5mm provides the basis for a well thought-out and durable carrying system that fully meets the high demands placed on a tactical knife in practice.

Intended use: Collection / Sports

Blade: Full tang in D2 steel at 59 / 60HRC
Handle: In G-10
Blade length: 170mm.
Blade thickness: 6mm.
Total length: 315mm.
Weight: 375g.
Sheath: in kydex
Packaging: box with numbered certificate

Basato sul noto MK-9, il designer Dietmar Pohl ha sviluppato il nuovo Tactical Nine. Ridotto nel peso e più compatto nelle dimensioni, il Tactical Nine è comunque un coltello a tutti gli effetti.

La robusta lama spear point lunga 20 centimetri e spessa 6 millimetri è adatta per un'ampia gamma di applicazioni. Per un'elevata ritenzione del filo e resilienza della lama, la scelta è ricaduta sul noto acciaio per utensili D2.

La finitura stonewashed crea una superficie antigraffio e aumenta anche la resistenza della lama alla corrosione. Il design delle guancette a forma di gradino offorno una presa eccellente e sicura. Per lavori potenti o delicati, l'incavo delle dita pronunciato e anche arrotondato davanti alla protezione consente al coltello di protendersi in avanti. Un foro nascosto all'estremità della maniglia offre la possibilità di montare un cordino (incluso).

Il fodero in Kydex del Tactical Nine ha uno spessore del materiale di 2,5 millimetri che fornisce la base per un sistema di trasporto ben congegnato e resistente e che soddisfa pienamente le elevate esigenze poste in pratica su un coltello tattico. Un cosciale, regolabile all'infinito nelle dimensioni, con chiusura a scatto consente di fissarlo alla coscia di chi lo indossa. 

Destinazione d'uso: Collezione/Sportivo

Lama: Full tang in acciaio D2 a 59/60HRC
Impugnatura: In G-10
Lunghezza lama: 200mm.
Spessore lama: 6mm.
Lunghezza totale: 345mm.
Peso: 482g.
Fodero: in kydex
Confezione: Patch 3D certificato numerato

With the Pohl Force MK-8 and MK-9 knives at its side, the legendary Rambo series (1982-2019), which like no other has made the knife the most important part of its equipment on the big screen, comes to an end.

The Pohl Force LAST BLOOD® CNC² Edition MK-9 is a perfectly designed knife in the eye-catching Spear Point style that looks like a modern, tactical tool in the unmistakable Pohl design.

Only strong and high quality materials are used for its manufacturing: the stainless steel 90Cr18MoV (440C) hardened at 57/58HRC gives the 23cm long and 6mm thick blade a high corrosion resistance and an excellent edge retention. The full tang construction is topped with a micarta handle that ends in an aesthetic element that can be used as a striking tool.

The micarta machining gives the handle a distinctive look with three-dimensional millings, and the handle and blade are visually connected by a CNC-milled guard machined from a solid block of stainless steel. A subhilt on the underside of the handle provides maximum control in handling the blade giving the MK-9 a distinctive look. It is completed by the ever-present knotted camouflage paracord lanyard that distinguishes all Pohl Force productions and matches exactly the same paracord used in the filming of the movie.

The knife comes with a leather sheath of the highest quality and is sold with a 3D Velcro patch and a cloth for care and cleaning.

Intended Use: Collection

Blade: Full tang stainless steel 90Cr18MoV (440C) at 57/58HRC
Handle: Micarta
Blade length: 230mm.
Blade thickness: 6mm.
Total lenght: 380mm.
Weight: 658g.
Scabbard: Leather
Packaging: 3D Velcro patch - Cleaning cloth

Intended use: Pocket knife

Type of production: industrial
Blade: 19C27 stainless steel
Blade treatment: -
Handle: snakewood
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 160mm.
Balancing: -
Weight: 65g.
Closing: -
Clip: -
Notes: aluminum box

This knife blade is convex on both sides in the tradition of the highly praised Japanese sword. This shape is both sharp and strong, and can still slice cleanly through a sheet of paper even after the punishment of chopping and cutting through dried bamboo. Using this special blade shape is an excellent way of allowing an edge to be thick without sacrificing any of its sharpness. This knife is of preeminent sharpness. This is a durable knife with strong cutting capabilities that will last for a long time. Even when used for rigorous cutting, the blade will not bite or catch thanks to its convex shape. Other knives will often bite or catch, and may acquire nicks if pulled out suddenly.

Blade: XR-7 steel at 64.3 HRC with DLC treatment
Handle: Same (real breed leather) and aeronautical aluminum with Hv400 black alumite treatment
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closing: Liner Lock in 402J2 steel at 52HRC
Clip: in 402J2 steel at 52HRC
Notes: Accompanied by a warranty certificate with technical specifications.

Intended use: Sports / Tactical

Type of production: Industrial
Blade: CTS-BD1 stainless steel
Blade treatment: micro-shot blasting
Handle: Zytel
Blade length: 113mm.
Blade thickness: 5mm.
Total length: 260mm.
Thick when closed: 18mm
Balancing: set back by 1cm from the guard branch
Weight: 270g.
Closure: Liner Lock
Clip: Removable and reversible, in stainless steel
Packaging: cardboard box with Pohl Force logos - numbered guarantee certificate - sticker with Pohl Force logos - PVC patch with velcro
Notes: Peg for opening with a single hand, which can be disassembled / assembled according to your preferences

This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.

Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: Folder

Intended use: Tactical collection
Type of production: Industrial
Blade: D2 steel
Blade treatment: Satin finish
Handle: Zytel
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 18mm
Balancing: 1cm back from the guard branch
Weight: 270g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Pohl Force logos - numbered certificate of guarantee - Cordura sheath - sticker with Pohl Force logos
Notes: Limited edition of just 600 numbered copies - Package Inside there is a small peg to mount on the back of the blade to make the opening knife with one hand

Intended use: Tactical collection
Type of production: Industrial
Blade: D2 steel
Blade treatment: Satin finish
Handle: Zytel
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 18mm
Balancing: 1cm back from the guard branch
Weight: 270g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Pohl Force logos - numbered certificate of guarantee - Cordura sheath - sticker with Pohl Force logos
Notes: Limited edition of just 600 numbered copies - Package Inside there is a small peg to mount on the back of the blade to make the opening knife with one hand

Intended use: Tactical / Hike

Type of production: Industrial
Country of production: Italy (Lion Steel - Maniago)
Blade: stainless steel Niolox
Surface treatment: Black Stonewash
Handle: G10
Blade length: 118 mm.
Blade thickness: 6 mm.
Overall length: 247 mm.
Balance: on guard branch
Weight: 280 g.
Sheath: Kydex thermoformed with Tek-Lok attack
Packaging: cardboard box with Pohl Force logos, PVC Patch, warranty card, photograph autographed by Dietmar Pohl with the number of knife series
Notes: Each knife is serialized and numbered on the blade, box, certificate and photograph autographed.

Intended Use: Tactical collection
Type of production: Industrial
Blade: Stainless steel CTS-BD1
Treatment Lama: black
Handle: Zytel
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 18mm
Balancing: backward 1cm from the branch guard
Weight: 270g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with logos Pohl Force - numbered certificate of guarantee - patch vinyl with velcro and logos Pohl Force - sticker logos Pohl Force
Notes: Inside the box there is a small pin to mount on the back of the blade to make the knife can be opened with one hand

Intended Use: Tactical collection
Type of production: Industrial
Blade: Stainless steel CTS-BD1
Treatment Lama: black
Handle: Zytel
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 18mm
Balancing: backward 1cm from the branch guard
Weight: 270g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with logos Pohl Force - numbered certificate of guarantee - patch vinyl with velcro and logos Pohl Force - sticker logos Pohl Force
Notes: Inside the box there is a small pin to mount on the back of the blade to make the knife can be opened with one hand

Intended Use: Tactical collection
Type of production: Industrial
Blade: Stainless steel CTS-BD1
Treatment Lama: black
Handle: Zytel
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 18mm
Balancing: backward 1cm from the branch guard
Weight: 270g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with logos Pohl Force - numbered certificate of guarantee - patch vinyl with velcro and logos Pohl Force - sticker logos Pohl Force
Notes: Inside the box there is a small pin to mount on the back of the blade to make the knife can be opened with one hand

Intended Use: Tactical collection
Type of production: Industrial
Blade: Stainless steel CTS-BD1
Treatment Lama: black
Handle: Zytel
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 18mm
Balancing: backward 1cm from the branch guard
Weight: 270g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with logos Pohl Force - numbered certificate of guarantee - patch vinyl with velcro and logos Pohl Force - sticker logos Pohl Force
Notes: Inside the box there is a small pin to mount on the back of the blade to make the knife can be opened with one hand

With the Quebec One, Pohl Force has implemented a classic use knife that
has been high on the wish list of company founder Dietmar Pohl for more than 20 years. Finally Pohl Force has received exclusive permission of the original manufacturer to be able to use the basic design for its own interpretation. As a “Ground Forces Combat & General Purpose Weapon“ the knife was developed in the early ‚50’s for the U.S. Marine Corps.
Although never officially introduced, it was used in Vietnam -mainly in the hands of Special Forces units where it clearly demonstrated its capabilities. Pohl Force has now recreated 60 years later a modern interpretation of this classic knife which displays the optimal fusion of a classic old school design, with modern high- tech manufacturing.

Overall length: 315 mm / 12.40 inches
Blade length : 193 mm / 7.59 inches
Blade thickness: 5.9 mm / 0.235 inch
Weight: 404 g
Blade steel: Sleipner
Blade finish: MilSpec coating
Handle material: G-10
Handle thickness: 24 mm / 0.94 inch
Sheath: Kydex® plus Adapter
Included accessories: Lanyard

Rockstead - SAI Titanium ZDP-189 - knife

Blade: ZDP-189 in 66.8HRC
Handle material: titanium
Blade length: 80 mm.
Blade Thickness: 3.7 mm.
Overall length: 190 mm.
Weight: 140g.
Closure: liner lock
Sheath: Black leather
Notes: Accompanied by a certificate of guarantee with the technical specifications.

BlackHawk ! Blades - Crucible II Folding Plain - 15C201BK knife

The brand BlackHawk ! Blades was born after the recent acquisition of MOD / Master of Defense by BlackHawk ! - American company leader in tactical gear. The new products keep high quality standards to which MOD we had become accustomed and speak directly to the police and martial artists in fighting techniques with a knife.

Intended Use: Tactical

Type of production : industrial
Blade: AUS-8 stainless steel
Treatment Blade: Teflon
Production Blade: Taiwan
Handle material: 1.5mm stainless steel liners , Cheeks G-10
Blade length : 90mm .
Blade Thickness: 3mm.
Length closed: 119mm .
Total length : 200mm .
Balance: -
Weight: 184g .
Lock: Liner Lock
Clip: Removable , multi-position stainless steel TiNi
Sheath: -
Notes: knife designed by Kelly McCann (aka Jim Grover ), founder of Crucible Security , one of the most important agencies of security services

Intended Use: Tactical

Type of production: industrial
Blade: stainless steel CPM-S30V
Treatment Lama: -
Production Lama USA
Handle material: G10
Blade length: 75mm.
Blade Thickness: 3mm.
Closed Length: 75mm
Total length: 175mm.
Balance: -
Weight: 110g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -

LoneWolf - Loveless City - Micarta knife

Intended use: Pocket Knife

Type of production: industrial
Blade: stainless steel 19c27
Treatment Blade: -
Handle: micarta loveless
Blade length: 60mm.
Blade Thickness: 2.5mm.
Closed Length: 95mm.
Overall length: 160mm.
Balancing: -
Weight: 65g.
Closure: -
Clip: -
Notes: aluminum box

LoneWolf - Loveless Clip Point Folder - knife

Intended use: Sport

Type of production: Industrial
Production Blade: Italy
Blade: 154CM stainless steel
Treatment Blade: -
Handle: Micarta
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 190mm.
Thick when closed: -
Balancing: -
Weight: 128g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Packaging: cardboard box with logos Lonewolf
Notes: Design by Loveless

Rockstead - About HPC - knife

With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.

Blade: stainless Hitachi YXR7 to 64.8HRC coverage HPC 3micron - Hv1800
Handle material: Duralumin A2024 with anodized surface to HV400 and skin of Breed
Blade length: 82 mm.
Blade Thickness: 4 mm.
Overall length: 189 mm.
Weight: 100 g.
Lock: Liner Lock 402J2 steel at 52HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

Target: Tactical / Sportsman

Type of production: Industrial
Blade production: Italy
Blade: D2 to 59HRC steel
Blade Treatment: PVD with 2500 Vickers surface hardness
Manicure: G-10
Blade Length: 116mm.
Blade thickness: 6mm.
Closed length: -
Total length: 250mm.
Closure thickness: -
Balance: -
Weight: 278g.
Closure: -
Clip: -
Sheath: Kydex with H & S hook
Packing: Cardboard box, zip carrying bag, warranty certificate
Notes: Each knife is numbered