Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
CRKT - M16-12LE knife Small Law Enforcement Tanto - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: small marks on tip
* Marks on handle: clip slightly marked
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryBlade: Teflon-coated AUS-8 high-carbon 57/58HRC stainless steel
Handle: Zytel grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Total length: 185mm.
Weight: 97g.
Closure: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety catchAP-CM16-12LE -
Kershaw - Bel Air - CPM-MagnaCut DuraLock KVT Knife - 6105 - pocket knife
Discover Made in USA quality and functionality with the Bel Air. When you open the knife, its smoothness is unmatched thanks to KVT ball bearings and DuraLock technology.
As for cutting, the steel of the MagnaCut blade maintains an exceptional edge, and the "reverse tanto" blade can handle the toughest challenges during daily carry. The BlackWash finish hides scratches from use and complements the aluminum handle grips. The slim profile makes it perfect for easy carrying, thanks in part to the reversible pocket clip.
Intended Use: SportyProduction type: Industrial
Country of manufacture: USA
Blade: CPM-MagnaCut 62/64HRC steel
Blade treatment: Blackwash
Handle: Aluminum 6061-T6
Blade length: 76mm.
Blade thickness: 2.3mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 11mm.
Weight: 82g.
Opening: via ambidextrous pins, placed on the blade
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, Teflon-coated stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opening on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)K6105 -
CRKT - P.S.D. II (Particle. Separation. Device.) by Hammond - AUS-10 & Brown G10 - 7910 - knife
Jim Hammond's original P.S.D. earned its name (Particle. Separation. Device.) for its ability to cut anything, anywhere. The P.S.D. II brings that same capability to a smaller, more portable folding knife, reducing the overall length by more than an inch. The blade is made of corrosion-resistant AUS10 with assisted opening on IKBS ball bearings that ensure quick and easy one-handed operation.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade Treatment: Black Oxide
Handle: G10
Blade Length: 76mm.
Blade thickness: 2.8mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 102g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC7910 -
CRKT - A.B.C. (All. Bases. Covered.) by Hammond - 12C27 & Black G10 - 2606 - knife
Jim Hammond's A.B.C. (All. Bases. Covered.) makes its return in an even more versatile form. It is now a folder, bringing the varied capabilities of the original fixed blade into a more convenient and compact design. With its assisted opening and IKBS pads, it's always ready for action at any time, while the G10 handle provides a strong grip even in adverse weather conditions.
Intended Use: Tactical
Production Type: Industrial
Country of Production: China
Blade: Sandvik 12C27 stainless steel
Blade treatment: Black Oxide
Handle: G10
Blade Length: 85.9mm.
Blade thickness: 3.1mm.
Length closed: 116mm.
Total length: 203mm.
Weight: 110g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC2606 -
Pohl Force - Bravo Two Classic - FDE Dark Stonewashed ATS-34 - 1079 - knife
To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.
From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.
It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.
The Bravo Two Classic BK is equipped with an FDE (Flat Dark Earth) fibreglass handle and a Tanto blade with a Dark Stonewashed finish.
Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dark Stonewashed
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacturePF-1079FDE -
Pohl Force - Bravo One Classic - FDE Dark Stonewashed ATS-34 - 1077 - knife
To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.
From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.
It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.
The Bravo One Classic BK features an FDE (Flat Dark Earth) fibreglass handle and a Drop point blade with a Dark Stonewashed finish.
Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dark Stonewashed
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacturePF-1077FDE -
CRKT - Pilar Large - Blackwashed Frame Lock Flipper by Vox - 5315KS - folding knife
Intended use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Blackwashed
Handle: Blackwashed stainless steel
Blade length: 67.8mm.
Blade thickness: 3.8mm.
Length closed: 101.5mm.
Total length: 170mm.
Weight: 119g.
Closure: Frame Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5315KS -
CRKT - Overland Compact Knife by T. J. Schwarz - 6277 - knife
The compact folding knife ready to tackle any terrain.
It may be small, but just like the upgraded 4x4 vehicles that inspired its name, the Overland Compact is exaggeratedly built and ready to tackle the toughest conditions. It takes the design cues and materials of the full-size Overland and puts them into an ultraportable format that practically disappears into a pocket. When it's time to stop the convoy and set up camp, this knife can prepare light food and chop up the perfect marshmallow stick.
Intended Use: Sporty
Production type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Blackwashed
Handle: G10 and Blackwashed stainless steel
Blade Length: 57mm.
Blade thickness: 3.2mm.
Length closed: 81mm.
Total length: 137mm.
Weight: 88g.
Closure: FrameLock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by T. J. SchwarzC6277 -
CRKT - Squid Compact by Lucas Burnley - 2485K - knife
This small knife is a big deal. The Squid is known as the perfect knife for everyday use, expertly combining simplicity, usability and performance.
Neither brash nor flashy, it is the humble handyman of the knife world: reliable, solid and extraordinarily capable. Now, renowned designer Lucas Burnley has reworked it into a smaller, nimbler version, the Squid Compact. This reasonably priced folding knife is for everyone.
* Assisted opening: The assisted flipper allows rapid blade opening.
* Smooth opening: The IKBS™ ball bearing system ensures maximum smoothness.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily
* Maximum control: Grooves on the back of the blade to ensure a secure and comfortable grip
* Maximum durability: Stainless steel handle withstands heavy use.
* Low profile: Pocket clip ensures safe carrying
* Accessory options: Hole for lanyard or key ring
Intended Use: EDC
Production type: Industrial
Country of manufacture: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: BlackWashed
Handle: BlackWashed stainless steel
Blade Length: 44mm.
Blade thickness: 2.6mm.
Length closed: 74mm.
Total length: 118mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS opening system on pinball-type bearings, spring preload assistedC2485K -
CRKT - Tuna Compact by Lucas Burnley - 2522 - knife
The little fish that rules every pond. Though small, the Tuna Compact evokes the power of one of the world's largest and fastest fish.
It takes the subtle elegance of designer Lucas Burnley's original Tuna and shrinks it into an ultra-compact folding knife. With a profile that suggests strong forward momentum and a blade shape that resembles a deep-sea carnivore, this everyday knife slices through packs and boxes faster than a bluefin tuna slices through waves on a taut line.
* Smooth opening: IKBS™ ball-bearing motion allows for a smooth blade opening.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily.
* Easy opening: The thumb engagement pin allows for quick one-handed opening.
* Exceptional grip: G10 handle provides exceptional grip in all conditions
* Brute force: Fame Lock system uses a thick locking bar to hold the blade in place
* Low profile: Pocket clip ensures safe and secure carrying away from prying eyes
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: StoneWashed
Handle: G10 and BlackWashed stainless steel
Blade Length: 69mm.
Blade thickness: 3.6mm.
Length closed: 97mm.
Total length: 163mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS ball bearing opening systemC2522 -
CRKT - CEO MicroFlipper Sheepfoot by Rogers - 7083 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 56mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 140mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7083 -
CRKT - CEO MicroFlipper Drop Point by Rogers - 7081 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 60mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 143mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7081 -
Kershaw - Frontrunner - KVT Flipper - 2039 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Stainless steel and G10
Blade length: 74mm.
Blade thickness: 3.1mm.
Length closed: 109mm.
Total length: 183mm.
Thickness when closed: 13mm.
Weight: 119g.
Opening: rapid Carson Flipper system
Washers: with KVT ball bearings
Closure: FrameLock
Clip: deep pocket, stainless steel, removable
Packaging: cardboard box with Kershaw logos
Notes: Opening via Carson-flipper system on KVT ball bearingsK2039 -
Kershaw - Covalent - DuraLock KVT Flipper Knife - 2042 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: BlackWash
Handle: GRN (Glass Reinforced Nylon)
Blade length: 81mm.
Blade thickness: 2.7mm.
Length closed: 112mm.
Total length: 193mm.
Thickness when closed: 12.4mm.
Weight: 79g.
Opening: rapid Carson Flipper system
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opening via carson-flipper system on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)K2042 -
Kershaw - Monitor - DuraLock KVT Flipper Knife - 2041 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Black Oxide
Handle: GRN (Glass Reinforced Nylon)
Blade length: 76mm.
Blade thickness: 2.3mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 12.4mm.
Weight: 77g.
Opening: rapid Carson Flipper system
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opening via carson-flipper system on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)K2041 -
Pohl Force - Charlie Three SW - D2 steel - 6011 - knife
With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Three covers a wide range of applications.
The modern Spear Point blade and handle of the Charlie Three are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The Stonewashed finish creates a scratch-resistant surface and increases the blade's corrosion resistance.
Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip.
The Charlie Three BK comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.
Intended Use: Tactical/SportingBlade: Full tang made of D2 steel at 59/60HRC with Stonewashed finish
Handle: -
Blade length: 95mm.
Blade thickness: 6mm.
Total length: 210mm.
Weight: 152g.
Sheath: kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signedPF-6011 -
Pohl Force - Compact Two BK TiNi - D2 steel - 6032 - knife
With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.
The focus is on the massive classic Drop Point blade of the Compact Two, which is 86 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The surface of the blade has a tactical, non-reflective TiNi titanium nitriding coating that provides excellent protection against external corrosives.
The reduced handle design is the basis for the knife's very compact size. The pleasantly rounded tang and cleverly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.
The Compact TWO BK is equipped with a robust, high-quality Kydex sheath in black. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.
Intended use: Tactical / SportingBlade: Full tang in D2 steel at 59/60HRC with TiNi coating
Handle: In G-10
Blade length: 86mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.PF-6032 -
Pohl Force - Compact Two SW - D2 steel - 6031 - knife
With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.
The focus is on the massive classic Drop Point blade of the Compact Two, which is 86 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion.
The reduced handle design is the basis for the knife's very compact size. The nicely rounded tang and expertly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.
The Compact Two SW is equipped with a robust, high-quality Kydex sheath in FDE (Flat Dark Earth) color. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.
Intended use: Tactical / SportingBlade: Full tang in D2 steel at 59/60HRC
Handle: In G-10
Blade length: 86mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.PF-6031 -
Pohl Force - Compact One SW - D2 steel - 6021 - knife
With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.
The focus is on the massive, classic Bowie blade of the Compact One, which is 88 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion.
The reduced handle design is the basis for the knife's very compact size. The nicely rounded tang and expertly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.
The Compact One SW is equipped with a robust, high-quality Kydex sheath in FDE (Flat Dark Earth) color. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.
Intended use: Tactical / SportingBlade: Full tang in D2 steel at 59/60HRC
Handle: In G-10
Blade length: 88mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.PF-6021 -
Kershaw - Camp 10 Machete - 1077 - Black - outdoor knife
Camp 10 is the ideal tool for the outdoors and for survival. The solid edge blade is made of 65Mn carbon tool steel which is characterized by its wear resistance. A black powder coating protects the steel and facilitates maintenance. The rubber-coated handle is super-durable and provides an extra-secure contoured grip. The handle has built-in hand protection and is perforated in both the front and back so you can attach a carrying lanyard to it. It features a black sheath with comfortable nylon straps.
Intended use: hard utility
Type of production: China industrial
Blade: 65Mn carbon steel
Blade treatment: Teflon coating
Handle: rubber
Blade length: 254mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 406mm.
Balance: advanced to 7.5cm.
Weight: 521g.
Closure: -
Clip: -
Sheath: Nylon GFN
Note:KE1077 -
CRKT - Clever Girl Kukri Knife - 2710 - Machete
Intended Use: Hiking / Heavy Duty
Production Type: industrial
Blade: Full Tang in carbon steel SK-5 with Black Powder treatment
Country of Production: Taiwan
Handle: G-10
Blade Length: 196mm.
Blade thickness: 4.8mm.
Total length: 336mm.
Balance: Advanced
Weight: 402g.
Sheath: thermoplastic
Packaging: cardboard box with CRKT logos
Notes: Design by Austin McGlaunCR2710 -
CRKT - Folts Minimalist Drop Point Black - 2384K - Knife
Intended Use: Neck Knife
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 55mm.
Blade thickness: 2.6mm.
Total length: 133mm.
Weight: 49g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan FoltsCR2384K -
CRKT - Carson M16-13DSFG Tan Special Forces - PRIVATE COLLECTION - pocket knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks on Tan-colored finish, unnoticeable
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: China
Blade: Stainless steel AUS-8
Blade Finish: Tan Oxide
Handle: PVD steel folders with G10 Tan grips
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 150g.
Opening: Carson Flipper system
Closure: Liner Lock with auto LAWKS security system
Clip: multi-position, removable, Black Oxide stainless steel
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemM16-13DSFG-CP -
Kershaw - Highball XL KVT Knife - 7020 - D2 steel - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Stainless steel with Stonewashed and G10 finish
Blade length: 84mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 190mm.
Weight: 108g.
Opening: KVT Bearings system
Washers: in reversible steel
Closure: Frame Lock
Clip: in stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Note: -K7020 -
Kershaw - Downforce Multi-Tool 5-Use - 8820 - Multi-Purpose Keychain
Keep the Downforce handy, or attach it to a keychain, and stay prepared for a variety of work tasks: the bottle opener, Phillips screwdriver and mini pry bar are all conveniently included in a lightweight multitool. Inspired by McLaren Formula 1 cars, the orange nylon and fiberglass coating makes the Downforce easy to spot in a tool kit, and the BlackWash stainless steel handle finish hides scratches well. The addition of serrations on the body help maintain a secure grip during use.
* A multi-tool for your keychain that includes a bottle opener, Phillips screwdriver, mini flathead screwdriver and keychain.
* Durable 3Cr13 stainless steel construction with a BlackWash finish that hides scratches from use.
* Orange "see me" nylon and fiberglass cover makes it easy to locate the tool.
Dimensions:
8.9cm. (Length)
17g. (Weight)K8820 -
CRKT - Techliner Super Shorty - TPENBOND2 - tactical pen
The Techliner™ Super Shorty pen is built to impress with a sleek, ergonomic body and magnetic ends that attach securely to whiteboards, desk legs and workbenches so it's always within reach.
Secure cap: Magnetic ends secure the cap and attach to surfaces
Strong and lightweight: Aluminum handle combines strength with minimal weight
Visually appealing: Blue anodized body
Compact size: Easy to carry
Write anywhere: Ink cartridge developed for extreme environmental conditionsMaterial: 6061 anodized aluminum with stainless steel clip
Rear base: Magnetic
Ink: Black with pressurized Schmidt Refill
Total length: 105mm.
Diameter: 11.7mm.
Weight: 19.8gTPENBOND2 -
CRKT - Freya by Elmer Roush - 2749 - Viking Axe
Intended Use: Sporting / Hiking
Production type: Industrial
Country of Production: Taiwan
Blade: Carbon steel 1055
Blade treatment: manganese phosphate
Handle: Walnut wood
Blade length: 88mm.
Blade thickness: 32mm.
Total length: 483mm.
Weight: 870g.
Scabbard: -
Notes: Design by Elmer RoushCR2749 -
CRKT - Berserker by RMJ Tactical - 2736 - Viking Axe
Intended Use: Sporting / Hiking
Production type: Industrial
Country of Production: Taiwan
Blade: Carbon steel 1055
Blade treatment: manganese phosphate
Handle: Walnut wood
Blade length: 118mm.
Blade thickness: 40mm.
Total length: 483mm.
Weight: 940g.
Scabbard: -
Notes: Design by by Ryan Johnson of RMJ TacticalCR2736 -
CRKT - Compano Carabiner by Bond - 9082 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15Mov
Blade finishing: Satin finish
Handle: 2Cr13 stainless steel with blackwash and bronze finish
Blade length: 37mm.
Blade thickness: 3.6mm.
Length closed: 82mm.
Total length: 117mm.
Weight: 62g.
Closure: Slipjoint
Clip: -
Package: Cardboard box with CRKT logos
Notes: Design by Mike Bond - Snap hook for attachment - Bottle openerCR9082 -
CRKT - Folts Minimalist Cleaver Blackout - 2383K - Knife
Intended Use: Neck Knife
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 54mm.
Blade thickness: 2.6mm.
Total length: 129mm.
Weight: 48g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan FoltsCR2383K -
CRKT - Pilar III by Vox - 5317 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: G10 and stainless steel with aluminum spacer
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 108mm.
Total length: 182mm.
Weight: 102g.
Closure: FrameLock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5317 -
CRKT - Carson M16-03BK - Bronze & Black Oxide - knife
Intended Use: Sporting / Tactical
Production Type: Industrial
Country of Production: China
Blade: Stainless steel 12C27 Sandvik
Blade treatment: Black Oxide
Handle: Stainless steel 2CR13 with nitriding in Bronze
Blade Length: 90mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 108g.
Opening: Carson Flipper system
Closure: Frame Lock
Clip: Multi-position, removable, in Black Oxide stainless steel
Package: Cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemCM16-03BK -
CRKT - CEO Bamboo by Rogers - 7096YGK - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: Nylon reinforced with fiberglass
Blade length: 79mm.
Blade thickness: 2.2mm.
Length closed: 113mm.
Total length: 194mm.
Weight: 59g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - IKBS ball bearing opening system - Winner of the 2019 Blade Show as "Best Buy Of The Year"C7096YGK -
Kershaw - Tumbler Flipper by Sinkevich - 4038 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: in steel D2
Blade treatment: Stonewashed
Handle: G10 and Carbon Fiber
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 114mm.
Total length: 187mm.
Thick when closed: 11mm.
Weight: 75g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closing: Sub Frame Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Notes: Design by SinkevichK4038 -
CRKT - Tuna Knife by Burnley - 2520 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr14Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: G10 and Blackwashed stainless steel
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 114mm.
Total length: 195mm.
Weight: 105g.
Closing: FrameLock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas BurnleyC2520 -
CRKT - Piet by Vox - 5390 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass with anodized titanium spacer
Blade length: 68mm.
Blade thickness: 3.3mm.
Length closed: 95mm.
Total length: 164mm.
Weight: 71g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5390 -
Kershaw - Oblivion SpeedSafe Frame Flipper - 3860 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Stonewashed
Handle: Stainless steel with Stonewashed and G10 finish
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 206mm.
Thick when closed: 10.2mm.
Weight: 146g.
Opening: Carson Flipper system and SpeedSafe Assisted Opening
Washers: steel,
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Note: -K3860 -
Kershaw - Innuendo Frame by Les George - 3440 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Gray TiNi
Handle: Stainless steel with bead-blasted finish
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 191mm.
Thick when closed: 10mm.
Weight: 127g.
Opening: through ambidextrous opening disc placed on the blade
Washers: in Teflon
Closure: Frame Lock
Clip: stainless steel, removable and reversible, with Gray TiNi treatment
Packaging: Cardboard box with Kershaw logos
Notes: Design by Les GeorgeK3440 -
Kershaw - Decibel Frame Knife - 2045 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Matte Gray TiNi
Handle: Stainless steel with Matte Gray TiNi finish
Blade length: 74mm.
Blade thickness: 2.5mm.
Length closed: 94mm.
Total length: 178mm.
Thick when closed: 15mm.
Weight: 83g.
Opening: through ambidextrous opening pin placed on the blade
Washers: in Teflon
Closure: Frame Lock
Clip: stainless steel, removable and reversible, with PVD treatment
Packaging: Cardboard box with Kershaw logos
Note: -K2045 -
Kershaw - Parsec Frame Flipper - 2035 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Stonewashed Brown PVD
Handle: Stainless steel with Stonewashed Brown PVD finish
Blade length: 7.6mm.
Blade thickness: 3mm.
Length closed: 105mm.
Total length: 182mm.
Thick when closed: 10.2mm.
Weight: 99g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Frame Lock
Clip: stainless steel, removable and reversible, with PVD treatment
Packaging: Cardboard box with Kershaw logos
Note: -K2035 -
Kershaw - Reverb XL - 1225 - knife
Intended use: sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: titanium carbo-nitride coating
Handle: G10 and carbon fiber with stainless steel frame
Blade length: 76mm.
Blade thickness: 2.8mm.
Closed length: 109mm.
Total length: 187mm.
Thick when closed: 9.9mm.
Weight: 62.4g.
Washers: in brass
Closure: Framelock
Clip: deep carry type, stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Notes: Carabiner / bottle opener integrated on the shankK1225 -
Kershaw - Concierge Blackwash by Sinkevich - Flipper - 4020 - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Blackwash
Handle: G10
Blade length: 83mm.
Blade thickness: 2.6mm.
Closed length: 108mm.
Total length: 184mm.
Thick when closed: 13.2mm.
Weight: 113g.
Opening: Carson Flipper system
Washers: in brass, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Kershaw logos
Notes: Design by SinkevichK4020 -
Kershaw - Antic Karambit Style Grip - 8710 - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Bead Blasted
Handle: Stainless steel with PVD treatment
Blade length: 47mm.
Blade thickness: 2.8mm.
Closed length: 96mm.
Total length: 140mm.
Thick when closed: 8.7mm.
Weight: 90g.
Opening: through ambidextrous thumstood
Washers: in Teflon
Closure: Frame Lock
Clip: stainless steel, removable
Sheath: -
Packaging: Cardboard box with Kershaw logos
Notes: bottle opener and screwdriverK8710 -
Kershaw - Xcom Military Knife by Les George - 3425 - knife
Intended use: Tactical
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Black Oxyde Blackwash
Handle: G10
Blade length: 92mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 203mm.
Thick when closed: 13.8mm.
Weight: 120g.
Opening: via removable Thumb Disk
Washers: in Teflon
Closure: Liner Lock
Clip: stainless steel, removable and reversible, 2 positions
Sheath: -
Packaging: Cardboard box with Kershaw logos
Notes: Design by Les GeorgeK3425 -
CRKT - Pilar Large by Vox - 5315G - folding knife
Destination of use: Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin
Handle: Stainless Steel
Blade length: 67mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 170mm.
Weight: 98g.
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5315G -
Kershaw - Emerson CQC-11K Wave Framelock - 6031 - knife
Intended use: Tactical / EDC
Type of production: industrial
Blade: 8Cr14MoV stainless steel
Blade Treatment: Stone Washed
Blade production: China
Handle: Stainless Steel and G10
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 121mm.
Total length: 216mm.
Thickness of handle: 10mm.
Weight: 166g.
Closure: Frame Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Opening through a Wave system or with a spacer opening (removable) - Design by Ernest R. EmersonK6030 -
CRKT - Hi Jinx Z by Ken Onion - K281KXP - PRIVATE COLLECTION - Pocket Knife
KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: like new
* Commercially available: discontinued
* Sharpening: factory sharpened
* Marks on the blade: None
* Marks on the handle: None
* Box: Present
* Scabbard: /
* Manuals, certificates and warranties: Available
* Tested and certified by our in-house laboratory.Intended Use: Sporting
Production Type: Industrial
Country of manufacture: China
Blade: Stainless steel 1.4116
Blade finish: Satin surface
Handle: GFN nylon
Blade length: 84 mm.
Blade thickness: 2.3 mm.
Length closed: 120 mm.
Total length: 203 mm.
Weight: 139 g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard box with CRKT logo
Notes: Ball bearing opening with IKBS system - Opening via Carson pinball system - Design by Ken OnionCK281KXP -
CRKT - Pilar by Vox - 5311 - folding knife
Intended use: Sports / EDC
Type of production: Industrial
Production Country: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: Stainless Steel
Blade length: 61mm.
Blade thickness: 3.5mm.
Closed Length: 90mm.
Overall length: 151mm.
Weight: 119g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5311 -
Kershaw - Grid Flipper Framelock - 2200 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Country: China
Blade: 8Cr14MoV stainless steel
Blade treatment: Teflon coating
Handle: Stainless Steel
Blade length: 95mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 210mm.
Thick when closed: 9.5mm.
Weight: 136g.
Closing: Framelock
Clip: removable, stainless steel
Notes: -K2200 -
Kershaw - Shuffle II Knife Tanto BlackWash 8750TBLK
Intended use: Sports / EDC
Type of production: Industrial
Blade: 8Cr13MoV stainless steel
Blade treatment: Teflon coating
Production Lama: China
Handle: FRN Black
Blade length: 60mm.
Blade Thickness: 2.5mm.
Closed Length: 90mm.
Overall length: 160mm.
Balancing: -
Weight: 86g.
Lock: Liner Lock
Clip: removable stainless steel teflon
Sheath: -
Notes: used as a bottle opener, and flat screwdriverK8750TBLKBW -
Kershaw - Shuffle II Knife Tanto BlackWash Tan 8750TTANBW
Intended use: Sports / EDC
Type of production: Industrial
Blade: 8Cr13MoV stainless steel
Blade treatment: Teflon coating
Production Lama: China
Handle: FRN Tan
Blade length: 60mm.
Blade Thickness: 2.5mm.
Closed Length: 90mm.
Overall length: 160mm.
Balancing: -
Weight: 86g.
Lock: Liner Lock
Clip: removable stainless steel teflon
Sheath: -
Notes: used as a bottle opener, and flat screwdriverK8750TTANBW -
Kershaw - Emerson CQC-4K Frame Lock - knife
Intended use: Tactical / EDC
Type of production: Industrial
Blade: 8Cr14MoV stainless steel
Blade treatment: Teflon
Production Country: China
Handle: G10
Blade length: 82mm.
Blade thickness: 3mm.
Closed Length: 90mm.
Overall length: 188mm.
Weight: 114g.
Closing: Framelock
Clip: removable and reversible, stainless steel
Notes: Design by Ernie EmersonK6054BRNBLK -
Kershaw - Shuffle Black - 8700BLK - knife
Intended use: Sport / EDC
Type of production: industry
Blade: stainless steel 8Cr13MoV
Treatment Blade: Teflon coating
Production Lama: China
Handle: FRN
Blade length: 60mm.
Blade Thickness: 2.5mm.
Closed Length: 83mm.
Overall length: 143mm.
Balancing: -
Weight: 79g.
Closure: Back Lock
Clip: Removable stainless steel Teflon
Sheath: -
Notes: used as a bottle opener and flathead screwdriverK8700BLK -
Kershaw - Hinderer Cryo Flipper Frame G10 - 1555G10 - knife
Intended use: Sport / Tactical / EDC
Type of production: industry
Blade: stainless steel 8Cr13MoV
Treatment Blade: Stonewashed
Production Lama: China
Handle: Stainless steel stonewashed and G10
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 165mm.
Balancing: -
Weight: 105g.
Closure: Frame Lock
Clip removable and multi, Teflon-coated stainless steel
Sheath: -
Notes: Design by Rick HindererK1555G10 -
CRKT - Ken Onion Hootenanny - K300KXP - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Lama: Satin
Handle: Stainless steel 2Cr13 and grips FRN
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 116mm.
Overall length: 201mm.
Thick when closed: -
Balancing: -
Weight: 136g.
Closure: Frame Lock Stainless Steel 2Cr13
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design Ken Onion, opening system with ball bearing type IKBS opening type Carson FlipperCK300KXP -
CRKT - Burnley Squid - 2490 - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Blade: Stonewashed
Handle: Stainless Steel 2Cr13
Blade length: 54mm.
Blade thickness: 3mm.
Closed Length: 55mm.
Overall length: 114mm.
Thick when closed: 14mm.
Balancing: -
Weight: 96g.
Closure: Frame Lock Stainless Steel 2Cr13
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design Lucas BurnleyC2490 -
CRKT - Carson M16-12ZLEK Law Enforcement Zytel Folding Tanto - knife
Blade: Stainless steel AUS-8 high-carbon 57 / 58HRC Teflon
Handle: Zytel Grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Overall length: 185 mm.
Weight: 102 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety locks and AutoLAWKS guard Carson Flipper tagliacinture with integrated rear window breakerCM16-12ZLEK -
Kershaw - Emerson E-Train Framelock - 6034T - knife
Intended use: Tactical / EDC
Type of production: industrial
Blade: 8Cr14MoV stainless steel
Treatment Lama: -
Production Lama: China
Handle: Stainless steel and G10
Blade length: 83mm.
Blade Thickness: 3mm.
Closed Length: 114mm.
Overall length: 197mm.
Balancing: -
Weight: 144g.
Closure: Frame Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Design by Ernie EmersonK6034TR -
Kershaw - Emerson CQC-6K Framelock - knife
Intended use: Tactical / EDC
Type of production: industrial
Blade: 8Cr14MoV stainless steel
Treatment Lama: -
Production Lama: China
Handle: Stainless steel and G10
Blade length: 83mm.
Blade Thickness: 3mm.
Closed Length: 114mm.
Overall length: 197mm.
Balancing: -
Weight: 144g.
Closure: Frame Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Design by Ernie EmersonK6034D2 -
Kershaw - Emerson CQC-7K Framelock - knife
Intended use: Tactical / EDC
Type of production: industrial
Blade: 8Cr14MoV stainless steel
Treatment Lama: -
Production Lama: China
Handle: Stainless steel and G10
Blade length: 83mm.
Blade Thickness: 3mm.
Closed Length: 114mm.
Overall length: 197mm.
Balancing: -
Weight: 144g.
Closure: Frame Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Design by Ernie EmersonK6034T -
Kershaw - Emerson CQC-5K Linerlock - knife
Intended use: Tactical / EDC
Type of production: industrial
Blade: 8Cr14MoV stainless steel
Treatment Blade: Teflon
Production Lama: China
Handle: G10
Blade length: 76mm.
Blade Thickness: 3mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 107g.
Lock: Liner Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Design by Ernie EmersonK6074OLBLK -
CRKT - Chanceinhell by Ken Onion - K910KKP - Machete
Destinazione d'uso: Escursionismo/Heavy Duty
Tipo di Produzione: industriale
Lama: in acciaio al carbonio 65Mn a 54/56 HRC con trattamento Black Powder
Produzione Lama Cina
Manicatura: Polimeri TPR e Nylon
Lunghezza lama: 304mm.
Spessore della lama: 2.5mm.
Lunghezza totale: 450mm.
Bilanciatura: avanzata
Peso: 490g.
Chiusura: -
Clip: -
Fodero: in Nylon
Confezione: scatola di cartone con loghi CRKT
Note: Design by Ken OnionCK910KKP -
CRKT - M16-04Z by Kit Carson - knife
Intended use: Sport
Type of production: Industrial
Production Blade: Taiwan
Blade: AUS-8 stainless steel
Treatment Lama: -
Handle: Zytel
Blade length: 94mm.
Blade thickness: 3.5mm.
Closed Length: 134mm.
Total length: 230mm.
Thick when closed: 17mm.
Balance: -
Weight: 182g.
Lock: Liner Lock locking system with self-LAWKS
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: -CM16-04Z -
CRKT - Carson M16-14SFG - Special Forces Big Dog G10 knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr14MoV to 58-60 HRC
Blade treatment: Ti-Ni
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 135mm.
Total length: 235mm.
Thick when closed: 17mm.
Balancing: -
Weight: 180g.
Closure: Liner Lock with auto-LAWKS locking system
Clip: stainless steel
Sheath: -
Packaging: cardboard box with CRKT logos
Note: -CM16-14SFG -
CRKT - Folts Minimalist Bowie - 2387 - Coltello
Destinazione d'uso: Neck Knife
Tipo di produzione: Industriale
Produzione Lama: China
Lama: in acciaio inox 5Cr15MoV 55/57HRC
Trattamento Lama: -
Manicatura: Micarta
Lunghezza lama: 54mm.
Spessore lama: 2.7mm.
Lunghezza chiuso: -
Lunghezza totale: 130mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 45g.
Chiusura: -
Clip: -
Fodero: Nylon
Confezione: Scatola di cartone con loghi CRKT
Note: Design dy Alan FoltsC2387 -
CRKT - Ripple Black Liner Lock by Ken Onion - K415KXP - Coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Paese di produzione: China
Lama: In acciaio inox 8Cr14MoV
Finitura lama: Satinatura
Manicatura: Alluminio Aeronautico
Lunghezza lama: 80mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 110mm.
Lunghezza totale: 185mm.
Spessore da chiuso: 8mm.
Peso: 66g.
Chiusura: Liner Lock
Clip: amovibile, in acciaio inox
Confezione: scatola in cartone con loghi CRKT
Note: Versione First Production Run - Sistema di apertura IKBS (Ikoma Korth Bearing System) su cuscinetti a sfera - Design by Ken Onion3803 -
Pohl Force - Bravo Two Classic - Black Two Tone ATS-34 - 1078 - knife
To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.
From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.
It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.
The Bravo Two Classic BK is equipped with a black fibreglass handle and a Tanto blade with an exciting two-tone finish (stonewashed/satin-finished lengthwise).
Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dual Tone (stonewashed + satin-finished)
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacturePF-1078BK -
Pohl Force - Bravo One Classic - Black Two Tone ATS-34 - 1076 - knife
To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.
From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.
It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.
The Bravo One Classic BK is equipped with a black fibreglass handle and a drop point blade with an exciting two-tone finish (stonewashed/longitudinal satin finish).
Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dual Tone (stonewashed + satin-finished)
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacturePF-1076BK -
Kershaw - Iridium - DuraLock KVT Knife - 2038 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Satin finish
Handle: Anodized aluminum
Blade length: 81mm.
Blade thickness: 2.7mm.
Length closed: 114mm.
Total length: 200mm.
Thickness when closed: 12.5mm.
Weight: 94g.
Opening: via ambidextrous pins placed on the blade
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opens on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)K2038 -
Kershaw - Heist - DuraLock KVT - 2037 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: GRN (Glass Reinforced Nylon)
Blade length: 81mm.
Blade thickness: 2.3mm.
Length closed: 112mm.
Total length: 193mm.
Thickness when closed: 11.7mm.
Weight: 79g.
Opening: via ambidextrous pins placed on the blade
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opens on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)K2037 -
CRKT - Carson knife M21-14SFG - Special Forces - knife
Intended use: Tactical/Military
Blade: AUS-8 56/58HRC stainless steel
Taiwan blade production
Handle: Aluminum
Blade length: 100mm.
Blade thickness: 3.5mm.
Closed length: 135mm.
Total length: 235mm.
Balancing: -
Weight: 155g.
Closure: Liner Lock
Clip: removable and reversible in stainless steel
Scabbard: -
Notes: design by Carson - AutoLAWKS safety catchM21-14SFG -
CRKT - First Strike - Large Tactical Knife 2706 Tanto - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in excellent condition
* Commercially available: No
* Sharpening: Original
* Marks on blade: NO
* Signs on handle: NO
* Packaging: NO
* Sheath: in plastic material
* Manuals, Certificates and Guarantees: NO
* Checked and Certified by our internal laboratory
Blade: AUS-8 high-carbon 57/58HRC stainless steel
Handle: in cotton with stingray skin insert
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 290mm.
Weight: 322g.
Sheath: plastic material
Note:CRKT-AP-2706